From 031c9a58425e31a601bf48336e527cc1664fc10e Mon Sep 17 00:00:00 2001 From: kfx Date: Tue, 16 Oct 2012 17:09:47 +0800 Subject: [PATCH] rk2928: rk2928 sdk(bga) initial --- arch/arm/configs/rk2926_m713_defconfig | 417 ---- arch/arm/configs/rk2928_sdk_defconfig | 33 +- arch/arm/mach-rk2928/Kconfig | 2 +- arch/arm/mach-rk2928/board-rk2926-sdk.c | 6 +- .../mach-rk2928/board-rk2928-sdk-act8931.c | 5 + .../arm/mach-rk2928/board-rk2928-sdk-camera.c | 19 +- arch/arm/mach-rk2928/board-rk2928-sdk-key.c | 40 +- .../mach-rk2928/board-rk2928-sdk-tps65910.c | 50 +- arch/arm/mach-rk2928/board-rk2928-sdk.c | 1998 ++++++++-------- arch/arm/mach-rk2928/board-rk2928-tb-camera.c | 448 ++++ arch/arm/mach-rk2928/board-rk2928-tb.c | 4 +- drivers/input/touchscreen/Kconfig | 4 + drivers/input/touchscreen/Makefile | 1 + drivers/input/touchscreen/gt811_firmware.h | 274 +++ drivers/input/touchscreen/gt811_ts.c | 2017 +++++++++++++++++ drivers/input/touchscreen/gt811_ts.h | 277 +++ sound/soc/codecs/rk2928_codec.c | 4 +- 17 files changed, 4055 insertions(+), 1544 deletions(-) delete mode 100644 arch/arm/configs/rk2926_m713_defconfig mode change 100644 => 100755 arch/arm/mach-rk2928/board-rk2928-sdk-camera.c create mode 100644 arch/arm/mach-rk2928/board-rk2928-tb-camera.c create mode 100755 drivers/input/touchscreen/gt811_firmware.h create mode 100755 drivers/input/touchscreen/gt811_ts.c create mode 100755 drivers/input/touchscreen/gt811_ts.h diff --git a/arch/arm/configs/rk2926_m713_defconfig b/arch/arm/configs/rk2926_m713_defconfig deleted file mode 100644 index 4b4afe1e2018..000000000000 --- a/arch/arm/configs/rk2926_m713_defconfig +++ /dev/null @@ -1,417 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_KERNEL_LZO=y -CONFIG_LOG_BUF_SHIFT=19 -CONFIG_CGROUPS=y -CONFIG_CGROUP_DEBUG=y -CONFIG_CGROUP_FREEZER=y -CONFIG_CGROUP_CPUACCT=y -CONFIG_RESOURCE_COUNTERS=y -CONFIG_CGROUP_SCHED=y -CONFIG_RT_GROUP_SCHED=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_PANIC_TIMEOUT=1 -# CONFIG_SYSCTL_SYSCALL is not set -# CONFIG_ELF_CORE is not set -CONFIG_ASHMEM=y -# CONFIG_AIO is not set -CONFIG_EMBEDDED=y -# CONFIG_SLUB_DEBUG is not set -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_ARCH_RK2928=y -CONFIG_RK_CLOCK_PROC=y -CONFIG_RK_USB_UART=y -CONFIG_MACH_RK2928_A720=y -CONFIG_MACH_RK2926_M713=y -CONFIG_FIQ_DEBUGGER=y -CONFIG_FIQ_DEBUGGER_NO_SLEEP=y -CONFIG_FIQ_DEBUGGER_CONSOLE=y -CONFIG_FIQ_DEBUGGER_CONSOLE_DEFAULT_ENABLE=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_PREEMPT=y -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_HIGHMEM=y -CONFIG_COMPACTION=y -CONFIG_DEFAULT_MMAP_MIN_ADDR=32768 -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyFIQ0 androidboot.console=ttyFIQ0 init=/init" -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_DEFAULT_GOV_INTERACTIVE=y -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_POWERSAVE=y -CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y -CONFIG_CPU_IDLE=y -CONFIG_VFP=y -CONFIG_NEON=y -CONFIG_WAKELOCK=y -CONFIG_PM_RUNTIME=y -CONFIG_PM_DEBUG=y -CONFIG_SUSPEND_TIME=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_XFRM_USER=y -CONFIG_NET_KEY=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_INET_ESP=y -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -CONFIG_IPV6=y -CONFIG_IPV6_PRIVACY=y -CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_OPTIMISTIC_DAD=y -CONFIG_INET6_AH=y -CONFIG_INET6_ESP=y -CONFIG_INET6_IPCOMP=y -CONFIG_IPV6_MIP6=y -CONFIG_IPV6_TUNNEL=y -CONFIG_IPV6_MULTIPLE_TABLES=y -CONFIG_NETFILTER=y -# CONFIG_BRIDGE_NETFILTER is not set -CONFIG_NF_CONNTRACK=y -CONFIG_NF_CONNTRACK_EVENTS=y -CONFIG_NF_CT_PROTO_DCCP=y -CONFIG_NF_CT_PROTO_SCTP=y -CONFIG_NF_CT_PROTO_UDPLITE=y -CONFIG_NF_CONNTRACK_AMANDA=y -CONFIG_NF_CONNTRACK_FTP=y -CONFIG_NF_CONNTRACK_H323=y -CONFIG_NF_CONNTRACK_IRC=y -CONFIG_NF_CONNTRACK_NETBIOS_NS=y -CONFIG_NF_CONNTRACK_PPTP=y -CONFIG_NF_CONNTRACK_SANE=y -CONFIG_NF_CONNTRACK_SIP=y -CONFIG_NF_CONNTRACK_TFTP=y -CONFIG_NF_CT_NETLINK=y -CONFIG_NETFILTER_TPROXY=y -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y -CONFIG_NETFILTER_XT_TARGET_CONNMARK=y -CONFIG_NETFILTER_XT_TARGET_IDLETIMER=y -CONFIG_NETFILTER_XT_TARGET_MARK=y -CONFIG_NETFILTER_XT_TARGET_NFLOG=y -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y -CONFIG_NETFILTER_XT_TARGET_TPROXY=y -CONFIG_NETFILTER_XT_TARGET_TRACE=y -CONFIG_NETFILTER_XT_MATCH_COMMENT=y -CONFIG_NETFILTER_XT_MATCH_CONNBYTES=y -CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y -CONFIG_NETFILTER_XT_MATCH_CONNMARK=y -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=y -CONFIG_NETFILTER_XT_MATCH_HELPER=y -CONFIG_NETFILTER_XT_MATCH_IPRANGE=y -CONFIG_NETFILTER_XT_MATCH_LENGTH=y -CONFIG_NETFILTER_XT_MATCH_LIMIT=y -CONFIG_NETFILTER_XT_MATCH_MAC=y -CONFIG_NETFILTER_XT_MATCH_MARK=y -CONFIG_NETFILTER_XT_MATCH_POLICY=y -CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y -CONFIG_NETFILTER_XT_MATCH_QTAGUID=y -CONFIG_NETFILTER_XT_MATCH_QUOTA=y -CONFIG_NETFILTER_XT_MATCH_QUOTA2=y -CONFIG_NETFILTER_XT_MATCH_QUOTA2_LOG=y -CONFIG_NETFILTER_XT_MATCH_SOCKET=y -CONFIG_NETFILTER_XT_MATCH_STATE=y -CONFIG_NETFILTER_XT_MATCH_STATISTIC=y -CONFIG_NETFILTER_XT_MATCH_STRING=y -CONFIG_NETFILTER_XT_MATCH_TIME=y -CONFIG_NETFILTER_XT_MATCH_U32=y -CONFIG_NF_CONNTRACK_IPV4=y -CONFIG_IP_NF_IPTABLES=y -CONFIG_IP_NF_MATCH_AH=y -CONFIG_IP_NF_MATCH_ECN=y -CONFIG_IP_NF_MATCH_TTL=y -CONFIG_IP_NF_FILTER=y -CONFIG_IP_NF_TARGET_REJECT=y -CONFIG_IP_NF_TARGET_REJECT_SKERR=y -CONFIG_IP_NF_TARGET_LOG=y -CONFIG_NF_NAT=y -CONFIG_IP_NF_TARGET_MASQUERADE=y -CONFIG_IP_NF_TARGET_NETMAP=y -CONFIG_IP_NF_TARGET_REDIRECT=y -CONFIG_IP_NF_MANGLE=y -CONFIG_IP_NF_RAW=y -CONFIG_IP_NF_ARPTABLES=y -CONFIG_IP_NF_ARPFILTER=y -CONFIG_IP_NF_ARP_MANGLE=y -CONFIG_NF_CONNTRACK_IPV6=y -CONFIG_IP6_NF_IPTABLES=y -CONFIG_IP6_NF_TARGET_LOG=y -CONFIG_IP6_NF_FILTER=y -CONFIG_IP6_NF_TARGET_REJECT=y -CONFIG_IP6_NF_TARGET_REJECT_SKERR=y -CONFIG_IP6_NF_MANGLE=y -CONFIG_IP6_NF_RAW=y -CONFIG_BRIDGE=y -# CONFIG_BRIDGE_IGMP_SNOOPING is not set -CONFIG_PHONET=y -CONFIG_NET_SCHED=y -CONFIG_NET_SCH_HTB=y -CONFIG_NET_SCH_INGRESS=y -CONFIG_NET_CLS_U32=y -CONFIG_NET_EMATCH=y -CONFIG_NET_EMATCH_U32=y -CONFIG_NET_CLS_ACT=y -CONFIG_NET_ACT_POLICE=y -CONFIG_NET_ACT_GACT=y -CONFIG_NET_ACT_MIRRED=y -CONFIG_BT=y -CONFIG_BT_L2CAP=y -CONFIG_BT_SCO=y -CONFIG_BT_RFCOMM=y -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=y -CONFIG_BT_HIDP=y -CONFIG_BT_HCIUART=y -CONFIG_BT_HCIUART_H4=y -CONFIG_BT_HCIUART_LL=y -CONFIG_BT_HCIBCM4325=y -CONFIG_BT_AUTOSLEEP=y -CONFIG_CFG80211=y -CONFIG_MAC80211=y -CONFIG_RFKILL=y -CONFIG_RFKILL_RK=y -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -# CONFIG_FIRMWARE_IN_KERNEL is not set -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_NAND_IDS=y -CONFIG_MTD_RKNAND=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_MISC_DEVICES=y -CONFIG_UID_STAT=y -CONFIG_APANIC=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_MD=y -CONFIG_BLK_DEV_DM=y -CONFIG_DM_CRYPT=y -CONFIG_DM_UEVENT=y -CONFIG_NETDEVICES=y -CONFIG_PHYLIB=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -CONFIG_WLAN_80211=y -CONFIG_RTL8188EU=y -CONFIG_USB_USBNET=y -CONFIG_PPP=y -CONFIG_PPP_MULTILINK=y -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=y -CONFIG_PPP_SYNC_TTY=y -CONFIG_PPP_DEFLATE=y -CONFIG_PPP_BSDCOMP=y -CONFIG_PPP_MPPE=y -CONFIG_PPPOLAC=y -CONFIG_PPPOPNS=y -# CONFIG_INPUT_MOUSEDEV is not set -CONFIG_INPUT_EVDEV=y -CONFIG_INPUT_KEYRESET=y -# CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_JOYSTICK=y -CONFIG_JOYSTICK_XPAD=y -CONFIG_JOYSTICK_XPAD_FF=y -CONFIG_INPUT_TABLET=y -CONFIG_TABLET_USB_ACECAD=y -CONFIG_TABLET_USB_AIPTEK=y -CONFIG_TABLET_USB_GTCO=y -CONFIG_TABLET_USB_HANWANG=y -CONFIG_TABLET_USB_KBTAB=y -CONFIG_TABLET_USB_WACOM=y -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_SITRONIX_A720=y -CONFIG_INPUT_MISC=y -CONFIG_INPUT_KEYCHORD=y -CONFIG_INPUT_UINPUT=y -CONFIG_GS_MMA7660=y -CONFIG_SENSOR_DEVICE=y -CONFIG_GSENSOR_DEVICE=y -# CONFIG_SERIO is not set -# CONFIG_CONSOLE_TRANSLATIONS is not set -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -# CONFIG_I2C_COMPAT is not set -CONFIG_I2C_CHARDEV=y -CONFIG_I2C0_CONTROLLER_RK30=y -CONFIG_I2C1_CONTROLLER_RK30=y -CONFIG_I2C2_CONTROLLER_RK30=y -CONFIG_ADC_RK30=y -CONFIG_GPIO_SYSFS=y -CONFIG_EXPANDED_GPIO_NUM=0 -CONFIG_EXPANDED_GPIO_IRQ_NUM=0 -CONFIG_SPI_FPGA_GPIO_NUM=0 -CONFIG_SPI_FPGA_GPIO_IRQ_NUM=0 -CONFIG_POWER_SUPPLY=y -CONFIG_BATTERY_RK30_ADC_FAC=y -CONFIG_BATTERY_RK30_AC_CHARGE=y -CONFIG_BATTERY_RK30_VOL3V8=y -# CONFIG_HWMON is not set -CONFIG_MFD_TPS65910=y -CONFIG_MFD_TPS65090=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_TPS65910=y -CONFIG_REGULATOR_ACT8931=y -CONFIG_RK30_PWM_REGULATOR=y -CONFIG_MEDIA_SUPPORT=y -CONFIG_VIDEO_DEV=y -CONFIG_SOC_CAMERA=y -CONFIG_SOC_CAMERA_GC0308=y -CONFIG_GC0308_USER_DEFINED_SERIES=y -CONFIG_VIDEO_RK29=y -CONFIG_VIDEO_RK29_CAMMEM_ION=y -CONFIG_ION=y -CONFIG_ION_ROCKCHIP=y -CONFIG_FB=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -# CONFIG_LCD_CLASS_DEVICE is not set -CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_BACKLIGHT_GENERIC is not set -CONFIG_DISPLAY_SUPPORT=y -CONFIG_LCD_RK2928_A720=y -CONFIG_FB_ROCKCHIP=y -CONFIG_LCDC_RK2928=y -CONFIG_RK_HDMI=y -CONFIG_HDMI_RK2928=y -CONFIG_RGA_RK30=y -CONFIG_RK_LVDS=y -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -CONFIG_SOUND=y -CONFIG_SND=y -# CONFIG_SND_SUPPORT_OLD_API is not set -# CONFIG_SND_VERBOSE_PROCFS is not set -# CONFIG_SND_DRIVERS is not set -# CONFIG_SND_ARM is not set -CONFIG_SND_SOC=y -CONFIG_SND_RK29_SOC=y -CONFIG_SND_I2S_DMA_EVENT_STATIC=y -CONFIG_SND_RK_SOC_RK2928=y -CONFIG_SND_RK29_CODEC_SOC_SLAVE=y -CONFIG_HID_A4TECH=y -CONFIG_HID_ACRUX=y -CONFIG_HID_ACRUX_FF=y -CONFIG_HID_APPLE=y -CONFIG_HID_BELKIN=y -CONFIG_HID_CHERRY=y -CONFIG_HID_CHICONY=y -CONFIG_HID_CYPRESS=y -CONFIG_HID_DRAGONRISE=y -CONFIG_DRAGONRISE_FF=y -CONFIG_HID_EMS_FF=y -CONFIG_HID_ELECOM=y -CONFIG_HID_EZKEY=y -CONFIG_HID_KEYTOUCH=y -CONFIG_HID_KYE=y -CONFIG_HID_UCLOGIC=y -CONFIG_HID_WALTOP=y -CONFIG_HID_GYRATION=y -CONFIG_HID_TWINHAN=y -CONFIG_HID_KENSINGTON=y -CONFIG_HID_LCPOWER=y -CONFIG_HID_LOGITECH=y -CONFIG_LOGITECH_FF=y -CONFIG_LOGIRUMBLEPAD2_FF=y -CONFIG_LOGIG940_FF=y -CONFIG_LOGIWII_FF=y -CONFIG_HID_MAGICMOUSE=y -CONFIG_HID_MICROSOFT=y -CONFIG_HID_MONTEREY=y -CONFIG_HID_MULTITOUCH=y -CONFIG_HID_NTRIG=y -CONFIG_HID_ORTEK=y -CONFIG_HID_PANTHERLORD=y -CONFIG_PANTHERLORD_FF=y -CONFIG_HID_PETALYNX=y -CONFIG_HID_PICOLCD=y -CONFIG_HID_QUANTA=y -CONFIG_HID_ROCCAT_ARVO=y -CONFIG_HID_ROCCAT_KONE=y -CONFIG_HID_ROCCAT_KONEPLUS=y -CONFIG_HID_ROCCAT_KOVAPLUS=y -CONFIG_HID_ROCCAT_PYRA=y -CONFIG_HID_SAMSUNG=y -CONFIG_HID_SONY=y -CONFIG_HID_SUNPLUS=y -CONFIG_HID_GREENASIA=y -CONFIG_GREENASIA_FF=y -CONFIG_HID_SMARTJOYPLUS=y -CONFIG_SMARTJOYPLUS_FF=y -CONFIG_HID_TOPSEED=y -CONFIG_HID_THRUSTMASTER=y -CONFIG_THRUSTMASTER_FF=y -CONFIG_HID_WACOM=y -CONFIG_HID_ZEROPLUS=y -CONFIG_ZEROPLUS_FF=y -CONFIG_HID_ZYDACRON=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_OTG_BLACKLIST_HUB=y -CONFIG_USB_STORAGE=y -CONFIG_USB_SERIAL=y -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_OPTION=y -CONFIG_USB_GADGET=y -CONFIG_USB20_HOST=y -CONFIG_USB20_OTG=y -CONFIG_DWC_OTG_BOTH_HOST_SLAVE=y -CONFIG_MMC=y -CONFIG_MMC_UNSAFE_RESUME=y -CONFIG_MMC_EMBEDDED_SDIO=y -CONFIG_MMC_PARANOID_SD_INIT=y -CONFIG_SDMMC_RK29=y -CONFIG_SDMMC0_RK29_SDCARD_DET_FROM_GPIO=y -# CONFIG_SDMMC1_RK29 is not set -CONFIG_SWITCH=y -CONFIG_SWITCH_GPIO=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HYM8563=y -CONFIG_TPS65910_RTC=y -CONFIG_STAGING=y -CONFIG_ANDROID=y -CONFIG_ANDROID_BINDER_IPC=y -CONFIG_ANDROID_LOGGER=y -CONFIG_ANDROID_LOW_MEMORY_KILLER=y -# CONFIG_CMMB is not set -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_EXT4_FS=y -# CONFIG_EXT4_FS_XATTR is not set -# CONFIG_DNOTIFY is not set -CONFIG_FUSE_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -# CONFIG_MISC_FILESYSTEMS is not set -# CONFIG_NETWORK_FILESYSTEMS is not set -CONFIG_PARTITION_ADVANCED=y -CONFIG_EFI_PARTITION=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -CONFIG_PRINTK_TIME=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_SCHEDSTATS=y -# CONFIG_DEBUG_PREEMPT is not set -# CONFIG_EVENT_POWER_TRACING_DEPRECATED is not set -CONFIG_ENABLE_DEFAULT_TRACERS=y -CONFIG_CRYPTO_SHA256=y -CONFIG_CRYPTO_TWOFISH=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/arm/configs/rk2928_sdk_defconfig b/arch/arm/configs/rk2928_sdk_defconfig index cf15f6e70784..2259638a18f6 100755 --- a/arch/arm/configs/rk2928_sdk_defconfig +++ b/arch/arm/configs/rk2928_sdk_defconfig @@ -176,6 +176,8 @@ CONFIG_BT_HCIUART_H4=y CONFIG_BT_HCIUART_LL=y CONFIG_BT_HCIBCM4325=y CONFIG_BT_AUTOSLEEP=y +CONFIG_CFG80211=y +CONFIG_MAC80211=y CONFIG_RFKILL=y CONFIG_RFKILL_RK=y CONFIG_DEVTMPFS=y @@ -203,7 +205,7 @@ CONFIG_PHYLIB=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set CONFIG_WLAN_80211=y -CONFIG_RKWIFI=y +CONFIG_RTL8188EU=y CONFIG_USB_USBNET=y CONFIG_PPP=y CONFIG_PPP_MULTILINK=y @@ -231,27 +233,16 @@ CONFIG_TABLET_USB_HANWANG=y CONFIG_TABLET_USB_KBTAB=y CONFIG_TABLET_USB_WACOM=y CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_EETI_EGALAX=y -CONFIG_EETI_EGALAX_MAX_X=1087 -CONFIG_EETI_EGALAX_MAX_Y=800 +CONFIG_TOUCHSCREEN_GT811_IIC=y CONFIG_INPUT_MISC=y CONFIG_INPUT_KEYCHORD=y CONFIG_INPUT_UINPUT=y -CONFIG_COMPASS_AK8975=y -CONFIG_GS_MMA8452=y -CONFIG_GYRO_L3G4200D=y -CONFIG_LS_CM3217=y +CONFIG_GS_MMA7660=y CONFIG_SENSOR_DEVICE=y CONFIG_GSENSOR_DEVICE=y -CONFIG_COMPASS_DEVICE=y -CONFIG_GYROSCOPE_DEVICE=y -CONFIG_LIGHT_DEVICE=y # CONFIG_SERIO is not set # CONFIG_CONSOLE_TRANSLATIONS is not set # CONFIG_LEGACY_PTYS is not set -CONFIG_SERIAL_RK29=y -CONFIG_UART0_RK29=y -CONFIG_UART0_CTS_RTS_RK29=y # CONFIG_HW_RANDOM is not set CONFIG_I2C=y # CONFIG_I2C_COMPAT is not set @@ -266,18 +257,22 @@ CONFIG_EXPANDED_GPIO_IRQ_NUM=0 CONFIG_SPI_FPGA_GPIO_NUM=0 CONFIG_SPI_FPGA_GPIO_IRQ_NUM=0 CONFIG_POWER_SUPPLY=y -CONFIG_TEST_POWER=y +CONFIG_BATTERY_RK30_ADC_FAC=y +CONFIG_BATTERY_RK30_AC_CHARGE=y +CONFIG_BATTERY_RK30_VOL3V8=y +CONFIG_POWER_ON_CHARGER_DISPLAY=y # CONFIG_HWMON is not set CONFIG_MFD_TPS65910=y CONFIG_MFD_TPS65090=y CONFIG_REGULATOR=y CONFIG_REGULATOR_TPS65910=y +CONFIG_REGULATOR_ACT8931=y CONFIG_RK30_PWM_REGULATOR=y CONFIG_MEDIA_SUPPORT=y CONFIG_VIDEO_DEV=y CONFIG_SOC_CAMERA=y -CONFIG_SOC_CAMERA_OV2659=y -CONFIG_SOC_CAMERA_OV5642=y +CONFIG_SOC_CAMERA_GC0308=y +CONFIG_GC0308_USER_DEFINED_SERIES=y CONFIG_VIDEO_RK29=y CONFIG_VIDEO_RK29_CAMMEM_ION=y CONFIG_ION=y @@ -288,7 +283,7 @@ CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_BACKLIGHT_GENERIC is not set CONFIG_DISPLAY_SUPPORT=y -CONFIG_LCD_HSD100PXN=y +CONFIG_LCD_RK2928_A720=y CONFIG_FB_ROCKCHIP=y CONFIG_LCDC_RK2928=y CONFIG_RK_HDMI=y @@ -375,11 +370,13 @@ CONFIG_USB_SERIAL_OPTION=y CONFIG_USB_GADGET=y CONFIG_USB20_HOST=y CONFIG_USB20_OTG=y +CONFIG_DWC_OTG_BOTH_HOST_SLAVE=y CONFIG_MMC=y CONFIG_MMC_UNSAFE_RESUME=y CONFIG_MMC_EMBEDDED_SDIO=y CONFIG_MMC_PARANOID_SD_INIT=y CONFIG_SDMMC_RK29=y +# CONFIG_SDMMC1_RK29 is not set CONFIG_SWITCH=y CONFIG_SWITCH_GPIO=y CONFIG_RTC_CLASS=y diff --git a/arch/arm/mach-rk2928/Kconfig b/arch/arm/mach-rk2928/Kconfig index 6c8548090d2c..ed6ec9fadffb 100644 --- a/arch/arm/mach-rk2928/Kconfig +++ b/arch/arm/mach-rk2928/Kconfig @@ -10,7 +10,7 @@ config MACH_RK2928 config MACH_RK2928_SDK - bool "RK2928 SDK board" + bool "RK2928(BGA) SDK board" config MACH_RK2926_SDK bool "RK2926 SDK board" diff --git a/arch/arm/mach-rk2928/board-rk2926-sdk.c b/arch/arm/mach-rk2928/board-rk2926-sdk.c index f477c7c25c6b..4e408ef1d73c 100755 --- a/arch/arm/mach-rk2928/board-rk2926-sdk.c +++ b/arch/arm/mach-rk2928/board-rk2926-sdk.c @@ -55,8 +55,8 @@ #include "../../../drivers/spi/rk29_spim.h" #endif -#include "board-rk2928-a720-camera.c" -#include "board-rk2928-a720-key.c" +#include "board-rk2928-sdk-camera.c" +#include "board-rk2928-sdk-key.c" int __sramdata g_pmic_type = 0; #define PMIC_TYPE_TPS65910 2 @@ -619,7 +619,7 @@ static struct platform_device *devices[] __initdata = { #ifdef CONFIG_I2C0_RK30 #ifdef CONFIG_MFD_TPS65910 #define TPS65910_HOST_IRQ RK2928_PIN1_PB2 -#include "board-rk2928-a720-tps65910.c" +#include "board-rk2928-sdk-tps65910.c" #endif #ifdef CONFIG_REGULATOR_ACT8931 #define ACT8931_HOST_IRQ RK2928_PIN1_PB1 diff --git a/arch/arm/mach-rk2928/board-rk2928-sdk-act8931.c b/arch/arm/mach-rk2928/board-rk2928-sdk-act8931.c index d495acb3251a..dfcf48910200 100755 --- a/arch/arm/mach-rk2928/board-rk2928-sdk-act8931.c +++ b/arch/arm/mach-rk2928/board-rk2928-sdk-act8931.c @@ -8,7 +8,12 @@ #ifdef CONFIG_REGULATOR_ACT8931 +#if defined(CONFIG_MACH_RK2928_SDK) +#define ACT8931_CHGSEL_PIN RK2928_PIN0_PD0 +#else #define ACT8931_CHGSEL_PIN RK2928_PIN1_PA1 +#endif + #define ACT8931_CHGSEL_VALUE GPIO_LOW /* Decline to 20% current */ extern int platform_device_register(struct platform_device *pdev); diff --git a/arch/arm/mach-rk2928/board-rk2928-sdk-camera.c b/arch/arm/mach-rk2928/board-rk2928-sdk-camera.c old mode 100644 new mode 100755 index ad549249f5c2..670fc7f6650c --- a/arch/arm/mach-rk2928/board-rk2928-sdk-camera.c +++ b/arch/arm/mach-rk2928/board-rk2928-sdk-camera.c @@ -2,13 +2,13 @@ /*---------------- Camera Sensor Macro Define Begin ------------------------*/ /*---------------- Camera Sensor Configuration Macro Begin ------------------------*/ #define CONFIG_SENSOR_0 RK29_CAM_SENSOR_OV5642 /* back camera sensor */ -#define CONFIG_SENSOR_IIC_ADDR_0 0x78// 0 +#define CONFIG_SENSOR_IIC_ADDR_0 0 #define CONFIG_SENSOR_IIC_ADAPTER_ID_0 0 #define CONFIG_SENSOR_CIF_INDEX_0 0 #define CONFIG_SENSOR_ORIENTATION_0 90 #define CONFIG_SENSOR_POWER_PIN_0 INVALID_GPIO #define CONFIG_SENSOR_RESET_PIN_0 INVALID_GPIO -#define CONFIG_SENSOR_POWERDN_PIN_0 RK2928_PIN3_PB3 +#define CONFIG_SENSOR_POWERDN_PIN_0 INVALID_GPIO//RK2928_PIN3_PB3 #define CONFIG_SENSOR_FALSH_PIN_0 INVALID_GPIO #define CONFIG_SENSOR_POWERACTIVE_LEVEL_0 RK29_CAM_POWERACTIVE_L #define CONFIG_SENSOR_RESETACTIVE_LEVEL_0 RK29_CAM_RESETACTIVE_L @@ -31,7 +31,7 @@ #define CONFIG_SENSOR_ORIENTATION_01 90 #define CONFIG_SENSOR_POWER_PIN_01 INVALID_GPIO #define CONFIG_SENSOR_RESET_PIN_01 INVALID_GPIO -#define CONFIG_SENSOR_POWERDN_PIN_01 RK2928_PIN3_PB3 +#define CONFIG_SENSOR_POWERDN_PIN_01 INVALID_GPIO//RK2928_PIN3_PB3 #define CONFIG_SENSOR_FALSH_PIN_01 INVALID_GPIO #define CONFIG_SENSOR_POWERACTIVE_LEVEL_01 RK29_CAM_POWERACTIVE_L #define CONFIG_SENSOR_RESETACTIVE_LEVEL_01 RK29_CAM_RESETACTIVE_L @@ -54,7 +54,7 @@ #define CONFIG_SENSOR_ORIENTATION_02 90 #define CONFIG_SENSOR_POWER_PIN_02 INVALID_GPIO #define CONFIG_SENSOR_RESET_PIN_02 INVALID_GPIO -#define CONFIG_SENSOR_POWERDN_PIN_02 RK2928_PIN3_PB3 +#define CONFIG_SENSOR_POWERDN_PIN_02 INVALID_GPIO//RK2928_PIN3_PB3 #define CONFIG_SENSOR_FALSH_PIN_02 INVALID_GPIO #define CONFIG_SENSOR_POWERACTIVE_LEVEL_02 RK29_CAM_POWERACTIVE_L #define CONFIG_SENSOR_RESETACTIVE_LEVEL_02 RK29_CAM_RESETACTIVE_L @@ -70,14 +70,19 @@ #define CONFIG_SENSOR_SVGA_FPS_FIXED_02 15000 #define CONFIG_SENSOR_720P_FPS_FIXED_02 30000 -#define CONFIG_SENSOR_1 RK29_CAM_SENSOR_OV2659 /* front camera sensor 0 */ -#define CONFIG_SENSOR_IIC_ADDR_1 0// 0x60 -#define CONFIG_SENSOR_IIC_ADAPTER_ID_1 3 +#define CONFIG_SENSOR_1 RK29_CAM_SENSOR_GC0308 /* front camera sensor 0 */ +#define CONFIG_SENSOR_IIC_ADDR_1 0x42 +#define CONFIG_SENSOR_IIC_ADAPTER_ID_1 1 #define CONFIG_SENSOR_CIF_INDEX_1 0 #define CONFIG_SENSOR_ORIENTATION_1 270 #define CONFIG_SENSOR_POWER_PIN_1 INVALID_GPIO #define CONFIG_SENSOR_RESET_PIN_1 INVALID_GPIO + +#if defined(CONFIG_MACH_RK2928_SDK) +#define CONFIG_SENSOR_POWERDN_PIN_1 RK2928_PIN3_PD7 +#else #define CONFIG_SENSOR_POWERDN_PIN_1 RK2928_PIN3_PB3 +#endif #define CONFIG_SENSOR_FALSH_PIN_1 INVALID_GPIO #define CONFIG_SENSOR_POWERACTIVE_LEVEL_1 RK29_CAM_POWERACTIVE_L #define CONFIG_SENSOR_RESETACTIVE_LEVEL_1 RK29_CAM_RESETACTIVE_L diff --git a/arch/arm/mach-rk2928/board-rk2928-sdk-key.c b/arch/arm/mach-rk2928/board-rk2928-sdk-key.c index 1074027e5515..9c9b32f9caa6 100755 --- a/arch/arm/mach-rk2928/board-rk2928-sdk-key.c +++ b/arch/arm/mach-rk2928/board-rk2928-sdk-key.c @@ -8,16 +8,14 @@ #define PRESS_LEV_HIGH 0 static struct rk29_keys_button key_button[] = { - { - .desc = "vol-", - .code = KEY_VOLUMEDOWN, - .gpio = RK2928_PIN0_PD1, - .active_low = PRESS_LEV_LOW, - }, { .desc = "play", .code = KEY_POWER, - .gpio = RK2928_PIN3_PC5, + #if defined(CONFIG_MACH_RK2928_SDK) + .gpio = RK2928_PIN0_PD1, + #else + .gpio = RK2928_PIN1_PA4, + #endif .active_low = PRESS_LEV_LOW, //.code_long_press = EV_ENCALL, .wakeup = 1, @@ -25,35 +23,15 @@ static struct rk29_keys_button key_button[] = { { .desc = "vol+", .code = KEY_VOLUMEUP, - .gpio = RK2928_PIN0_PD0, - .active_low = PRESS_LEV_LOW, - }, - { - .desc = "menu", - .code = EV_MENU, - .adc_value = 135, - .gpio = INVALID_GPIO, - .active_low = PRESS_LEV_LOW, - }, - { - .desc = "home", - .code = KEY_HOME, - .adc_value = 550, .gpio = INVALID_GPIO, + .adc_value = 1, .active_low = PRESS_LEV_LOW, }, { - .desc = "esc", - .code = KEY_BACK, - .adc_value = 334, - .gpio = INVALID_GPIO, - .active_low = PRESS_LEV_LOW, - }, - { - .desc = "camera", - .code = KEY_CAMERA, - .adc_value = 743, + .desc = "vol-", + .code = KEY_VOLUMEDOWN, .gpio = INVALID_GPIO, + .adc_value = 512, .active_low = PRESS_LEV_LOW, }, }; diff --git a/arch/arm/mach-rk2928/board-rk2928-sdk-tps65910.c b/arch/arm/mach-rk2928/board-rk2928-sdk-tps65910.c index 1a8773b6d1bb..7215da55b8b7 100755 --- a/arch/arm/mach-rk2928/board-rk2928-sdk-tps65910.c +++ b/arch/arm/mach-rk2928/board-rk2928-sdk-tps65910.c @@ -7,18 +7,22 @@ #include #include -#define gpio_readl(offset) readl_relaxed(RK2928_GPIO3_BASE + offset) -#define gpio_writel(v, offset) do { writel_relaxed(v, RK2928_GPIO3_BASE + offset); dsb(); } while (0) +#define gpio_readl(offset) readl_relaxed(RK2928_GPIO1_BASE + offset) +#define gpio_writel(v, offset) do { writel_relaxed(v, RK2928_GPIO1_BASE + offset); dsb(); } while (0) #define GPIO_SWPORTA_DR 0x0000 #define GPIO_SWPORTA_DDR 0x0004 -#define GPIO3_D2_OUTPUT (1<<26) -#define GPIO3_D2_OUTPUT_HIGH (1<<26) -#define GPIO3_D2_OUTPUT_LOW (~(1<<26)) +#define GPIO1_A1_OUTPUT (1<<1) +#define GPIO1_A1_OUTPUT_HIGH (1<<1) +#define GPIO1_A1_OUTPUT_LOW (~(1<<1)) #ifdef CONFIG_MFD_TPS65910 -#define PMU_POWER_SLEEP RK2928_PIN3_PD2 +#if defined(CONFIG_MACH_RK2928_SDK) +#define PMU_POWER_SLEEP RK2928_PIN0_PD0 +#else +#define PMU_POWER_SLEEP RK2928_PIN1_PA1 +#endif extern int platform_device_register(struct platform_device *pdev); int tps65910_pre_init(struct tps65910 *tps65910){ @@ -224,12 +228,16 @@ int tps65910_pre_init(struct tps65910 *tps65910){ return 0; } + int tps65910_post_init(struct tps65910 *tps65910) { struct regulator *dcdc; struct regulator *ldo; printk("%s,line=%d\n", __func__,__LINE__); + g_pmic_type = PMIC_TYPE_TPS65910; + printk("%s:g_pmic_type=%d\n",__func__,g_pmic_type); + #ifdef CONFIG_RK30_PWM_REGULATOR platform_device_register(&pwm_regulator_device[0]); #endif @@ -240,14 +248,14 @@ int tps65910_post_init(struct tps65910 *tps65910) printk("%s set vio vcc_io=%dmV end\n", __func__, regulator_get_voltage(dcdc)); regulator_put(dcdc); udelay(100); - + /* ldo = regulator_get(NULL, "vpll"); // vcc25 regulator_set_voltage(ldo, 2500000, 2500000); regulator_enable(ldo); printk("%s set vpll vcc25=%dmV end\n", __func__, regulator_get_voltage(ldo)); regulator_put(ldo); udelay(100); - + */ ldo = regulator_get(NULL, "vdig2"); // vdd12 regulator_set_voltage(ldo, 1200000, 1200000); regulator_enable(ldo); @@ -277,7 +285,7 @@ int tps65910_post_init(struct tps65910 *tps65910) udelay(100); ldo = regulator_get(NULL, "vdig1"); //vcc18_cif - regulator_set_voltage(ldo, 1800000, 1800000); + regulator_set_voltage(ldo, 1500000, 1500000); regulator_enable(ldo); printk("%s set vdig1 vcc18_cif=%dmV end\n", __func__, regulator_get_voltage(ldo)); regulator_put(ldo); @@ -296,18 +304,19 @@ int tps65910_post_init(struct tps65910 *tps65910) printk("%s set vaux2 vcca33=%dmV end\n", __func__, regulator_get_voltage(ldo)); regulator_put(ldo); udelay(100); - - ldo = regulator_get(NULL, "vdac"); // + /* + ldo = regulator_get(NULL, "vdac"); // vccio_wl regulator_set_voltage(ldo,1800000,1800000); regulator_enable(ldo); - printk("%s set vdac =%dmV end\n", __func__, regulator_get_voltage(ldo)); + printk("%s set vdac vccio_wl=%dmV end\n", __func__, regulator_get_voltage(ldo)); regulator_put(ldo); udelay(100); - + */ ldo = regulator_get(NULL, "vmmc"); //vccio_wl regulator_set_voltage(ldo,3300000,3300000); regulator_enable(ldo); printk("%s set vmmc vccio_wl=%dmV end\n", __func__, regulator_get_voltage(ldo)); + regulator_disable(ldo); regulator_put(ldo); udelay(100); @@ -315,7 +324,6 @@ int tps65910_post_init(struct tps65910 *tps65910) return 0; } - static struct regulator_consumer_supply tps65910_smps1_supply[] = { { .supply = "vdd1", @@ -570,25 +578,23 @@ static struct regulator_init_data tps65910_ldo8 = { .num_consumer_supplies = ARRAY_SIZE(tps65910_ldo8_supply), .consumer_supplies = tps65910_ldo8_supply, }; - -void __sramfunc board_pmu_suspend(void) +void __sramfunc board_pmu_tps65910_suspend(void) { int ret; ret = gpio_readl(GPIO_SWPORTA_DDR); - gpio_writel(ret | GPIO3_D2_OUTPUT, GPIO_SWPORTA_DDR); + gpio_writel(ret | GPIO1_A1_OUTPUT, GPIO_SWPORTA_DDR); ret = gpio_readl(GPIO_SWPORTA_DR); - gpio_writel(ret | GPIO3_D2_OUTPUT_HIGH, GPIO_SWPORTA_DR); //set pmu_sleep output high + gpio_writel(ret | GPIO1_A1_OUTPUT_HIGH, GPIO_SWPORTA_DR); //set pmu_sleep output high } -void __sramfunc board_pmu_resume(void) +void __sramfunc board_pmu_tps65910_resume(void) { int ret; ret = gpio_readl(GPIO_SWPORTA_DDR); - gpio_writel(ret | GPIO3_D2_OUTPUT, GPIO_SWPORTA_DDR); + gpio_writel(ret | GPIO1_A1_OUTPUT, GPIO_SWPORTA_DDR); ret = gpio_readl(GPIO_SWPORTA_DR); - gpio_writel(ret & GPIO3_D2_OUTPUT_LOW, GPIO_SWPORTA_DR); //set pmu_sleep output low + gpio_writel(ret & GPIO1_A1_OUTPUT_LOW, GPIO_SWPORTA_DR); //set pmu_sleep output low sram_udelay(2000); } - static struct tps65910_board tps65910_data = { .irq = (unsigned)TPS65910_HOST_IRQ, .irq_base = NR_GIC_IRQS + NR_GPIO_IRQS, diff --git a/arch/arm/mach-rk2928/board-rk2928-sdk.c b/arch/arm/mach-rk2928/board-rk2928-sdk.c index ba63ef7a7ae2..4e2a00f5faad 100755 --- a/arch/arm/mach-rk2928/board-rk2928-sdk.c +++ b/arch/arm/mach-rk2928/board-rk2928-sdk.c @@ -1,1041 +1,957 @@ -/* arch/arm/mach-rk2928/board-rk2928-fpga.c - * - * Copyright (C) 2012 ROCKCHIP, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#if defined(CONFIG_HDMI_RK30) - #include "../../../drivers/video/rockchip/hdmi/rk_hdmi.h" -#endif - -#if defined(CONFIG_SPIM_RK29) -#include "../../../drivers/spi/rk29_spim.h" -#endif -#if defined(CONFIG_GPS_RK) -#include "../../../drivers/misc/gps/rk_gps/rk_gps.h" -#endif - - -#ifdef CONFIG_THREE_FB_BUFFER -#define RK30_FB0_MEM_SIZE 12*SZ_1M -#else -#define RK30_FB0_MEM_SIZE 8*SZ_1M -#endif - -#include "board-rk2928-sdk-camera.c" -#include "board-rk2928-sdk-key.c" - -#if defined (CONFIG_EETI_EGALAX) -#define TOUCH_RESET_PIN RK2928_PIN3_PC3 -#define TOUCH_INT_PIN RK2928_PIN3_PC7 - -static int EETI_EGALAX_init_platform_hw(void) -{ - if(gpio_request(TOUCH_RESET_PIN,NULL) != 0){ - gpio_free(TOUCH_RESET_PIN); - printk("p1003_init_platform_hw gpio_request error\n"); - return -EIO; - } - - if(gpio_request(TOUCH_INT_PIN,NULL) != 0){ - gpio_free(TOUCH_INT_PIN); - printk("p1003_init_platform_hw gpio_request error\n"); - return -EIO; - } - gpio_pull_updown(TOUCH_INT_PIN, 1); - gpio_direction_output(TOUCH_RESET_PIN, 0); - msleep(500); - gpio_set_value(TOUCH_RESET_PIN,GPIO_LOW); - msleep(500); - gpio_set_value(TOUCH_RESET_PIN,GPIO_HIGH); - - return 0; -} - - -static struct eeti_egalax_platform_data eeti_egalax_info = { - .model= 1003, - .init_platform_hw= EETI_EGALAX_init_platform_hw, - .standby_pin = INVALID_GPIO, - //.standby_value = GPIO_HIGH, - .disp_on_pin = INVALID_GPIO, - //.disp_on_value = GPIO_HIGH, -}; -#endif - -static struct spi_board_info board_spi_devices[] = { -}; - -/*********************************************************** -* rk30 backlight -************************************************************/ -#ifdef CONFIG_BACKLIGHT_RK29_BL -#define PWM_ID 0 -#define PWM_MUX_NAME GPIO0D2_PWM_0_NAME -#define PWM_MUX_MODE GPIO0D_PWM_0 -#define PWM_MUX_MODE_GPIO GPIO0D_GPIO0D2 -#define PWM_GPIO RK2928_PIN0_PD2 -#define PWM_EFFECT_VALUE 1 - -#define LCD_DISP_ON_PIN - -#ifdef LCD_DISP_ON_PIN - -#define BL_EN_PIN RK2928_PIN3_PC4 -#define BL_EN_VALUE GPIO_HIGH -#endif -static int rk29_backlight_io_init(void) -{ - int ret = 0; - rk30_mux_api_set(PWM_MUX_NAME, PWM_MUX_MODE); -#ifdef LCD_DISP_ON_PIN - // rk30_mux_api_set(BL_EN_MUX_NAME, BL_EN_MUX_MODE); - - ret = gpio_request(BL_EN_PIN, NULL); - if (ret != 0) { - gpio_free(BL_EN_PIN); - } - - gpio_direction_output(BL_EN_PIN, 0); - gpio_set_value(BL_EN_PIN, BL_EN_VALUE); -#endif - return ret; -} - -static int rk29_backlight_io_deinit(void) -{ - int ret = 0; -#ifdef LCD_DISP_ON_PIN - gpio_free(BL_EN_PIN); -#endif - rk30_mux_api_set(PWM_MUX_NAME, PWM_MUX_MODE_GPIO); - return ret; -} - -static int rk29_backlight_pwm_suspend(void) -{ - int ret = 0; - rk30_mux_api_set(PWM_MUX_NAME, PWM_MUX_MODE_GPIO); - if (gpio_request(PWM_GPIO, NULL)) { - printk("func %s, line %d: request gpio fail\n", __FUNCTION__, __LINE__); - return -1; - } - gpio_direction_output(PWM_GPIO, GPIO_LOW); -#ifdef LCD_DISP_ON_PIN - gpio_direction_output(BL_EN_PIN, 0); - gpio_set_value(BL_EN_PIN, !BL_EN_VALUE); -#endif - - return ret; -} - -static int rk29_backlight_pwm_resume(void) -{ - gpio_free(PWM_GPIO); - rk30_mux_api_set(PWM_MUX_NAME, PWM_MUX_MODE); -#ifdef LCD_DISP_ON_PIN - msleep(30); - gpio_direction_output(BL_EN_PIN, 1); - gpio_set_value(BL_EN_PIN, BL_EN_VALUE); -#endif - return 0; -} - -static struct rk29_bl_info rk29_bl_info = { - .pwm_id = PWM_ID, - .bl_ref = PWM_EFFECT_VALUE, - .io_init = rk29_backlight_io_init, - .io_deinit = rk29_backlight_io_deinit, - .pwm_suspend = rk29_backlight_pwm_suspend, - .pwm_resume = rk29_backlight_pwm_resume, -}; - -static struct platform_device rk29_device_backlight = { - .name = "rk29_backlight", - .id = -1, - .dev = { - .platform_data = &rk29_bl_info, - } -}; - -#endif - -/*MMA8452 gsensor*/ -#if defined (CONFIG_GS_MMA8452) - -static int mma8452_init_platform_hw(void) -{ - return 0; -} - -static struct sensor_platform_data mma8452_info = { - .type = SENSOR_TYPE_ACCEL, - .irq_enable = 1, - .poll_delay_ms = 30, - .init_platform_hw = mma8452_init_platform_hw, - .orientation = {-1, 0, 0, 0, 0, 1, 0, -1, 0}, -}; -#endif -#if defined (CONFIG_COMPASS_AK8975) -static struct sensor_platform_data akm8975_info = -{ - .type = SENSOR_TYPE_COMPASS, - .irq_enable = 1, - .poll_delay_ms = 30, - .m_layout = - { - { - {1, 0, 0}, - {0, 1, 0}, - {0, 0, 1}, - }, - - { - {1, 0, 0}, - {0, 1, 0}, - {0, 0, 1}, - }, - - { - {1, 0, 0}, - {0, 1, 0}, - {0, 0, 1}, - }, - - { - {1, 0, 0}, - {0, 1, 0}, - {0, 0, 1}, - }, - } -}; - -#endif - -#if defined(CONFIG_GYRO_L3G4200D) - -#include - -static int l3g4200d_init_platform_hw(void) -{ - return 0; -} - -static struct sensor_platform_data l3g4200d_info = { - .type = SENSOR_TYPE_GYROSCOPE, - .irq_enable = 1, - .poll_delay_ms = 30, - .orientation = {0, 1, 0, -1, 0, 0, 0, 0, 1}, - .init_platform_hw = l3g4200d_init_platform_hw, - .x_min = 40,//x_min,y_min,z_min = (0-100) according to hardware - .y_min = 40, - .z_min = 20, -}; - -#endif - -#ifdef CONFIG_LS_CM3217 -static struct sensor_platform_data cm3217_info = { - .type = SENSOR_TYPE_LIGHT, - .irq_enable = 0, - .poll_delay_ms = 500, -}; - -#endif - -#ifdef CONFIG_FB_ROCKCHIP - -#define LCD_CABC_MUX_NAME GPIO2D1_LCDC0_D23_LCDC1_D23_NAME -#define LCD_CABC_GPIO_MODE GPIO2D_GPIO2D1 - -#define LCD_CABC_EN RK2928_PIN2_PD1 -#define LCD_CABC_EN_VALUE GPIO_HIGH - -static int rk_fb_io_init(struct rk29_fb_setting_info *fb_setting) -{ - int ret = 0; - - rk30_mux_api_set(LCD_CABC_MUX_NAME, LCD_CABC_GPIO_MODE); - - ret = gpio_request(LCD_CABC_EN, NULL); - if (ret != 0) - { - gpio_free(LCD_CABC_EN); - printk(KERN_ERR "request lcd cabc en pin fail!\n"); - return -1; - } - else - { - gpio_direction_output(LCD_CABC_EN, !LCD_CABC_EN_VALUE); //disable - } - return 0; -} -static int rk_fb_io_disable(void) -{ - return 0; -} -static int rk_fb_io_enable(void) -{ - return 0; -} - -#if defined(CONFIG_LCDC_RK2928) -struct rk29fb_info lcdc_screen_info = { - .prop = PRMRY, //primary display device - .io_init = rk_fb_io_init, - .io_disable = rk_fb_io_disable, - .io_enable = rk_fb_io_enable, - .set_screen_info = set_lcd_info, -}; -#endif - -static struct resource resource_fb[] = { - [0] = { - .name = "fb0 buf", - .start = 0, - .end = 0,//RK30_FB0_MEM_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .name = "ipp buf", //for rotate - .start = 0, - .end = 0,//RK30_FB0_MEM_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - [2] = { - .name = "fb2 buf", - .start = 0, - .end = 0,//RK30_FB0_MEM_SIZE - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device device_fb = { - .name = "rk-fb", - .id = -1, - .num_resources = ARRAY_SIZE(resource_fb), - .resource = resource_fb, -}; -#endif - -//LCDC -#ifdef CONFIG_LCDC_RK2928 -static struct resource resource_lcdc[] = { - [0] = { - .name = "lcdc reg", - .start = RK2928_LCDC_PHYS, - .end = RK2928_LCDC_PHYS + RK2928_LCDC_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - - [1] = { - .name = "lcdc irq", - .start = IRQ_LCDC, - .end = IRQ_LCDC, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device device_lcdc = { - .name = "rk2928-lcdc", - .id = 0, - .num_resources = ARRAY_SIZE(resource_lcdc), - .resource = resource_lcdc, - .dev = { - .platform_data = &lcdc_screen_info, - }, -}; -#endif - -#ifdef CONFIG_ION -#define ION_RESERVE_SIZE (80 * SZ_1M) -static struct ion_platform_data rk30_ion_pdata = { - .nr = 1, - .heaps = { - { - .type = ION_HEAP_TYPE_CARVEOUT, - .id = ION_NOR_HEAP_ID, - .name = "norheap", - .size = ION_RESERVE_SIZE, - } - }, -}; - -static struct platform_device device_ion = { - .name = "ion-rockchip", - .id = 0, - .dev = { - .platform_data = &rk30_ion_pdata, - }, -}; -#endif - -#ifdef CONFIG_RK30_PWM_REGULATOR -const static int pwm_voltage_map[] = { - 1000000, 1025000, 1050000, 1075000, 1100000, 1125000, 1150000, 1175000, 1200000, 1225000, 1250000, 1275000, 1300000, 1325000, 1350000, 1375000, 1400000 -}; - -static struct regulator_consumer_supply pwm_dcdc1_consumers[] = { - { - .supply = "vdd_core", - } -}; - -struct regulator_init_data pwm_regulator_init_dcdc[1] = -{ - { - .constraints = { - .name = "PWM_DCDC1", - .min_uV = 600000, - .max_uV = 1800000, //0.6-1.8V - .apply_uV = true, - .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE, - }, - .num_consumer_supplies = ARRAY_SIZE(pwm_dcdc1_consumers), - .consumer_supplies = pwm_dcdc1_consumers, - }, -}; - -static struct pwm_platform_data pwm_regulator_info[1] = { - { - .pwm_id = 2, - .pwm_gpio = RK2928_PIN0_PD4, - .pwm_iomux_name = GPIO0D4_PWM_2_NAME, - .pwm_iomux_pwm = GPIO0D_PWM_2, - .pwm_iomux_gpio = GPIO0D_GPIO0D4, - .pwm_voltage = 1200000, - .suspend_voltage = 1050000, - .min_uV = 1000000, - .max_uV = 1400000, - .coefficient = 455, //45.5% - .pwm_voltage_map = pwm_voltage_map, - .init_data = &pwm_regulator_init_dcdc[0], - }, -}; - -struct platform_device pwm_regulator_device[1] = { - { - .name = "pwm-voltage-regulator", - .id = 0, - .dev = { - .platform_data = &pwm_regulator_info[0], - } - }, -}; -#endif -/************************************************************************************************** - * SDMMC devices, include the module of SD,MMC,and sdio.noted by xbw at 2012-03-05 -**************************************************************************************************/ -#ifdef CONFIG_SDMMC_RK29 -#include "board-rk2928-sdk-sdmmc.c" - -#if defined(CONFIG_SDMMC0_RK29_WRITE_PROTECT) -#define SDMMC0_WRITE_PROTECT_PIN RK2928_PIN1_PA7 //According to your own project to set the value of write-protect-pin. -#endif - -#if defined(CONFIG_SDMMC1_RK29_WRITE_PROTECT) -#define SDMMC1_WRITE_PROTECT_PIN RK2928_PIN0_PD5 //According to your own project to set the value of write-protect-pin. -#endif - -#define RK29SDK_WIFI_SDIO_CARD_DETECT_N RK2928_PIN0_PB2 - -#endif //endif ---#ifdef CONFIG_SDMMC_RK29 - -#ifdef CONFIG_SDMMC0_RK29 -static int rk29_sdmmc0_cfg_gpio(void) -{ - rk29_sdmmc_set_iomux(0, 0xFFFF); - - rk30_mux_api_set(GPIO1C1_MMC0_DETN_NAME, GPIO1C_MMC0_DETN); - -#if defined(CONFIG_SDMMC0_RK29_WRITE_PROTECT) - gpio_request(SDMMC0_WRITE_PROTECT_PIN, "sdmmc-wp"); - gpio_direction_input(SDMMC0_WRITE_PROTECT_PIN); -#endif - - return 0; -} - -#define CONFIG_SDMMC0_USE_DMA -struct rk29_sdmmc_platform_data default_sdmmc0_data = { - .host_ocr_avail = - (MMC_VDD_25_26 | MMC_VDD_26_27 | MMC_VDD_27_28 | MMC_VDD_28_29 | - MMC_VDD_29_30 | MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 | - MMC_VDD_33_34 | MMC_VDD_34_35 | MMC_VDD_35_36), - .host_caps = - (MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), - .io_init = rk29_sdmmc0_cfg_gpio, - -#if !defined(CONFIG_SDMMC_RK29_OLD) - .set_iomux = rk29_sdmmc_set_iomux, -#endif - - .dma_name = "sd_mmc", -#ifdef CONFIG_SDMMC0_USE_DMA - .use_dma = 1, -#else - .use_dma = 0, -#endif - .detect_irq = RK2928_PIN1_PC1, // INVALID_GPIO - .enable_sd_wakeup = 0, - -#if defined(CONFIG_SDMMC0_RK29_WRITE_PROTECT) - .write_prt = SDMMC0_WRITE_PROTECT_PIN, -#else - .write_prt = INVALID_GPIO, -#endif -}; -#endif // CONFIG_SDMMC0_RK29 - -#ifdef CONFIG_SDMMC1_RK29 -#define CONFIG_SDMMC1_USE_DMA -static int rk29_sdmmc1_cfg_gpio(void) -{ -#if defined(CONFIG_SDMMC_RK29_OLD) - rk30_mux_api_set(GPIO0B0_MMC1_CMD_NAME, GPIO0B_MMC1_CMD); - rk30_mux_api_set(GPIO0B1_MMC1_CLKOUT_NAME, GPIO0B_MMC1_CLKOUT); - rk30_mux_api_set(GPIO0B3_MMC1_D0_NAME, GPIO0B_MMC1_D0); - rk30_mux_api_set(GPIO0B4_MMC1_D1_NAME, GPIO0B_MMC1_D1); - rk30_mux_api_set(GPIO0B5_MMC1_D2_NAME, GPIO0B_MMC1_D2); - rk30_mux_api_set(GPIO0B6_MMC1_D3_NAME, GPIO0B_MMC1_D3); - //rk30_mux_api_set(GPIO0B2_MMC1_DETN_NAME, GPIO0B_MMC1_DETN); - -#else - -#if defined(CONFIG_SDMMC1_RK29_WRITE_PROTECT) - gpio_request(SDMMC1_WRITE_PROTECT_PIN, "sdio-wp"); - gpio_direction_input(SDMMC1_WRITE_PROTECT_PIN); -#endif - -#endif - - return 0; -} - -struct rk29_sdmmc_platform_data default_sdmmc1_data = { - .host_ocr_avail = - (MMC_VDD_25_26 | MMC_VDD_26_27 | MMC_VDD_27_28 | MMC_VDD_28_29 | - MMC_VDD_29_30 | MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 | - MMC_VDD_33_34), - -#if !defined(CONFIG_USE_SDMMC1_FOR_WIFI_DEVELOP_BOARD) - .host_caps = (MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ | - MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), -#else - .host_caps = - (MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), -#endif - - .io_init = rk29_sdmmc1_cfg_gpio, - -#if !defined(CONFIG_SDMMC_RK29_OLD) - .set_iomux = rk29_sdmmc_set_iomux, -#endif - - .dma_name = "sdio", -#ifdef CONFIG_SDMMC1_USE_DMA - .use_dma = 1, -#else - .use_dma = 0, -#endif - -#if !defined(CONFIG_USE_SDMMC1_FOR_WIFI_DEVELOP_BOARD) -#ifdef CONFIG_WIFI_CONTROL_FUNC - .status = rk29sdk_wifi_status, - .register_status_notify = rk29sdk_wifi_status_register, -#endif -#if 0 - .detect_irq = RK29SDK_WIFI_SDIO_CARD_DETECT_N, -#endif - -#if defined(CONFIG_SDMMC1_RK29_WRITE_PROTECT) - .write_prt = SDMMC1_WRITE_PROTECT_PIN, -#else - .write_prt = INVALID_GPIO, -#endif - -#else - .detect_irq = INVALID_GPIO, - .enable_sd_wakeup = 0, -#endif - -}; -#endif //endif--#ifdef CONFIG_SDMMC1_RK29 - -/************************************************************************************************** - * the end of setting for SDMMC devices -**************************************************************************************************/ - - - -#ifdef CONFIG_RFKILL_RK -// bluetooth rfkill device, its driver in net/rfkill/rfkill-rk.c -static struct rfkill_rk_platform_data rfkill_rk_platdata = { - .type = RFKILL_TYPE_BLUETOOTH, - - .poweron_gpio = { // BT_REG_ON - .io = INVALID_GPIO, - .enable = GPIO_HIGH, - .iomux = { - .name = NULL, - }, - }, - - .reset_gpio = { // BT_RST - .io = RK2928_PIN3_PD5, // set io to INVALID_GPIO for disable it - .enable = GPIO_LOW, - .iomux = { - .name = NULL, - }, - }, - - .wake_gpio = { // BT_WAKE, use to control bt's sleep and wakeup - .io = RK2928_PIN0_PC6, // set io to INVALID_GPIO for disable it - .enable = GPIO_HIGH, - .iomux = { - .name = NULL, - }, - }, - - .wake_host_irq = { // BT_HOST_WAKE, for bt wakeup host when it is in deep sleep - .gpio = { - .io = RK2928_PIN0_PC5, // set io to INVALID_GPIO for disable it - .enable = GPIO_LOW, // set GPIO_LOW for falling, set 0 for rising - .iomux = { - .name = NULL, - }, - }, - }, - - .rts_gpio = { // UART_RTS, enable or disable BT's data coming - .io = RK2928_PIN0_PC3, // set io to INVALID_GPIO for disable it - .enable = GPIO_LOW, - .iomux = { - .name = GPIO0C3_UART0_CTSN_NAME, - .fgpio = GPIO0C_GPIO0C3, - .fmux = GPIO0C_UART0_CTSN, - }, - }, -}; - -static struct platform_device device_rfkill_rk = { - .name = "rfkill_rk", - .id = -1, - .dev = { - .platform_data = &rfkill_rk_platdata, - }, -}; -#endif - -#ifdef CONFIG_SND_SOC_RK2928 -static struct resource resources_acodec[] = { - { - .start = RK2928_ACODEC_PHYS, - .end = RK2928_ACODEC_PHYS + RK2928_ACODEC_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = RK2928_PIN3_PD4, - .end = RK2928_PIN3_PD4, - .flags = IORESOURCE_IO, - }, -}; - -static struct platform_device device_acodec = { - .name = "rk2928-codec", - .id = -1, - .num_resources = ARRAY_SIZE(resources_acodec), - .resource = resources_acodec, -}; -#endif - -#if defined(CONFIG_GPS_RK) -int rk_gps_io_init(void) -{ - printk("%s \n", __FUNCTION__); - rk30_mux_api_set(GPIO1B1_SPI_TXD_UART1_SOUT_NAME, GPIO1B_GPIO1B1);//VCC_EN - gpio_request(RK2928_PIN1_PB1, NULL); - gpio_direction_output(RK2928_PIN1_PB1, GPIO_LOW); - - rk30_mux_api_set(GPIO1A2_I2S_LRCKRX_GPS_CLK_NAME, GPIO1A_GPS_CLK);//GPS_CLK - rk30_mux_api_set(GPIO1A4_I2S_SDO_GPS_MAG_NAME, GPIO1A_GPS_MAG);//GPS_MAG - rk30_mux_api_set(GPIO1A5_I2S_SDI_GPS_SIGN_NAME, GPIO1A_GPS_SIGN);//GPS_SIGN - - rk30_mux_api_set(GPIO1B0_SPI_CLK_UART1_CTSN_NAME, GPIO1B_GPIO1B0);//SPI_CLK - gpio_request(RK2928_PIN1_PB0, NULL); - gpio_direction_output(RK2928_PIN1_PB0, GPIO_LOW); - - rk30_mux_api_set(GPIO1B2_SPI_RXD_UART1_SIN_NAME, GPIO1B_GPIO1B2);//SPI_MOSI - gpio_request(RK2928_PIN1_PB2, NULL); - gpio_direction_output(RK2928_PIN1_PB2, GPIO_LOW); - - rk30_mux_api_set(GPIO1B3_SPI_CSN0_UART1_RTSN_NAME, GPIO1B_GPIO1B3);//SPI_CS - gpio_request(RK2928_PIN1_PB3, NULL); - gpio_direction_output(RK2928_PIN1_PB3, GPIO_LOW); - return 0; -} -int rk_gps_power_up(void) -{ - printk("%s \n", __FUNCTION__); - - return 0; -} - -int rk_gps_power_down(void) -{ - printk("%s \n", __FUNCTION__); - - return 0; -} - -int rk_gps_reset_set(int level) -{ - return 0; -} -int rk_enable_hclk_gps(void) -{ - printk("%s \n", __FUNCTION__); - clk_enable(clk_get(NULL, "aclk_gps")); - return 0; -} -int rk_disable_hclk_gps(void) -{ - printk("%s \n", __FUNCTION__); - clk_disable(clk_get(NULL, "aclk_gps")); - return 0; -} -struct rk_gps_data rk_gps_info = { - .io_init = rk_gps_io_init, - .power_up = rk_gps_power_up, - .power_down = rk_gps_power_down, - .reset = rk_gps_reset_set, - .enable_hclk_gps = rk_enable_hclk_gps, - .disable_hclk_gps = rk_disable_hclk_gps, - .GpsSign = RK2928_PIN1_PA5, - .GpsMag = RK2928_PIN1_PA4, //GPIO index - .GpsClk = RK2928_PIN1_PA2, //GPIO index - .GpsVCCEn = RK2928_PIN1_PB1, //GPIO index - .GpsSpi_CSO = RK2928_PIN1_PB3, //GPIO index - .GpsSpiClk = RK2928_PIN1_PB0, //GPIO index - .GpsSpiMOSI = RK2928_PIN1_PB2, //GPIO index - .GpsIrq = IRQ_GPS, - .GpsSpiEn = 1, - .GpsAdcCh = 2, - .u32GpsPhyAddr = RK2928_GPS_PHYS, - .u32GpsPhySize = RK2928_GPS_SIZE, -}; - -struct platform_device rk_device_gps = { - .name = "gps_hv5820b", - .id = -1, - .dev = { - .platform_data = &rk_gps_info, - } - }; -#endif - - -static struct platform_device *devices[] __initdata = { -#ifdef CONFIG_FB_ROCKCHIP - &device_fb, -#endif -#ifdef CONFIG_LCDC_RK2928 - &device_lcdc, -#endif -#ifdef CONFIG_BACKLIGHT_RK29_BL - &rk29_device_backlight, -#endif -#ifdef CONFIG_ION - &device_ion, -#endif -#ifdef CONFIG_WIFI_CONTROL_FUNC - &rk29sdk_wifi_device, -#endif -#ifdef CONFIG_RFKILL_RK - &device_rfkill_rk, -#endif -#ifdef CONFIG_SND_SOC_RK2928 - &device_acodec, -#endif -#ifdef CONFIG_GPS_RK - &rk_device_gps, -#endif - -}; -//i2c -#ifdef CONFIG_I2C0_RK30 -static struct i2c_board_info __initdata i2c0_info[] = { -#if defined (CONFIG_GS_MMA8452) - { - .type = "gs_mma8452", - .addr = 0x1d, - .flags = 0, - .irq = RK2928_PIN3_PD1, - .platform_data = &mma8452_info, - }, -#endif -#if defined (CONFIG_COMPASS_AK8975) - { - .type = "ak8975", - .addr = 0x0d, - .flags = 0, - .irq = RK2928_PIN3_PD2, - .platform_data = &akm8975_info, - }, -#endif -#if defined (CONFIG_GYRO_L3G4200D) - { - .type = "l3g4200d_gryo", - .addr = 0x69, - .flags = 0, - .irq = RK2928_PIN3_PD3, - .platform_data = &l3g4200d_info, - }, -#endif -}; -#endif -#ifdef CONFIG_I2C1_RK30 -#ifdef CONFIG_MFD_TPS65910 -#define TPS65910_HOST_IRQ RK2928_PIN3_PC6 -#include "board-rk2928-sdk-tps65910.c" -#endif -static struct i2c_board_info __initdata i2c1_info[] = { - -#if defined (CONFIG_MFD_TPS65910) - { - .type = "tps65910", - .addr = TPS65910_I2C_ID0, - .flags = 0, - .irq = TPS65910_HOST_IRQ, - .platform_data = &tps65910_data, - }, -#endif - -}; -#endif -#ifdef CONFIG_I2C2_RK30 -static struct i2c_board_info __initdata i2c2_info[] = { -#if defined (CONFIG_EETI_EGALAX) - { - .type = "egalax_i2c", - .addr = 0x04, - .flags = 0, - .irq = RK2928_PIN3_PC7, - .platform_data = &eeti_egalax_info, - }, -#endif -#if defined (CONFIG_LS_CM3217) - { - .type = "lightsensor", - .addr = 0x10, - .flags = 0, - .platform_data = &cm3217_info, - }, -#endif -}; -#endif -#ifdef CONFIG_I2C3_RK30 -static struct i2c_board_info __initdata i2c3_info[] = { -}; -#endif -#ifdef CONFIG_I2C_GPIO_RK30 -#define I2C_SDA_PIN INVALID_GPIO //set sda_pin here -#define I2C_SCL_PIN INVALID_GPIO //set scl_pin here -static int rk30_i2c_io_init(void) -{ - //set iomux (gpio) here - - return 0; -} -struct i2c_gpio_platform_data default_i2c_gpio_data = { - .sda_pin = I2C_SDA_PIN, - .scl_pin = I2C_SCL_PIN, - .udelay = 5, // clk = 500/udelay = 100Khz - .timeout = 100,//msecs_to_jiffies(100), - .bus_num = 5, - .io_init = rk30_i2c_io_init, -}; -static struct i2c_board_info __initdata i2c_gpio_info[] = { -}; -#endif -static void __init rk30_i2c_register_board_info(void) -{ -#ifdef CONFIG_I2C0_RK30 - i2c_register_board_info(0, i2c0_info, ARRAY_SIZE(i2c0_info)); -#endif -#ifdef CONFIG_I2C1_RK30 - i2c_register_board_info(1, i2c1_info, ARRAY_SIZE(i2c1_info)); -#endif -#ifdef CONFIG_I2C2_RK30 - i2c_register_board_info(2, i2c2_info, ARRAY_SIZE(i2c2_info)); -#endif -#ifdef CONFIG_I2C3_RK30 - i2c_register_board_info(3, i2c3_info, ARRAY_SIZE(i2c3_info)); -#endif -#ifdef CONFIG_I2C_GPIO_RK30 - i2c_register_board_info(4, i2c_gpio_info, ARRAY_SIZE(i2c_gpio_info)); -#endif -} -//end of i2c - -#define POWER_ON_PIN RK2928_PIN3_PC5 //power_hold -static void rk2928_pm_power_off(void) -{ - printk(KERN_ERR "rk2928_pm_power_off start...\n"); - - #if defined(CONFIG_MFD_TPS65910) - tps65910_device_shutdown();//tps65910 shutdown - #endif - gpio_direction_output(POWER_ON_PIN, GPIO_LOW); - -}; - -static void __init rk2928_board_init(void) -{ - gpio_request(POWER_ON_PIN, "poweronpin"); - gpio_direction_output(POWER_ON_PIN, GPIO_HIGH); - gpio_free(POWER_ON_PIN); - - pm_power_off = rk2928_pm_power_off; - - rk30_i2c_register_board_info(); - spi_register_board_info(board_spi_devices, ARRAY_SIZE(board_spi_devices)); - platform_add_devices(devices, ARRAY_SIZE(devices)); - //RK2928 USB DETECT IRQ: IRQ_OTG_BVALID - //board_usb_detect_init(RK30_PIN6_PA3); - -#ifdef CONFIG_WIFI_CONTROL_FUNC - rk29sdk_wifi_bt_gpio_control_init(); -#endif -} - -static void __init rk2928_reserve(void) -{ -#ifdef CONFIG_ION - rk30_ion_pdata.heaps[0].base = board_mem_reserve_add("ion", ION_RESERVE_SIZE); -#endif -#ifdef CONFIG_FB_ROCKCHIP - resource_fb[0].start = board_mem_reserve_add("fb0", RK30_FB0_MEM_SIZE); - resource_fb[0].end = resource_fb[0].start + RK30_FB0_MEM_SIZE - 1; -#if 0 - resource_fb[1].start = board_mem_reserve_add("ipp buf", RK30_FB0_MEM_SIZE); - resource_fb[1].end = resource_fb[1].start + RK30_FB0_MEM_SIZE - 1; - resource_fb[2].start = board_mem_reserve_add("fb2", RK30_FB0_MEM_SIZE); - resource_fb[2].end = resource_fb[2].start + RK30_FB0_MEM_SIZE - 1; -#endif -#endif -#ifdef CONFIG_VIDEO_RK29 - rk30_camera_request_reserve_mem(); -#endif - -#ifdef CONFIG_GPS_RK - //it must be more than 8MB - rk_gps_info.u32MemoryPhyAddr = board_mem_reserve_add("gps", SZ_8M); -#endif - - board_mem_reserved(); -} -/** - * dvfs_cpu_logic_table: table for arm and logic dvfs - * @frequency : arm frequency - * @cpu_volt : arm voltage depend on frequency - * @logic_volt : logic voltage arm requests depend on frequency - * comments : min arm/logic voltage - */ -static struct dvfs_arm_table dvfs_cpu_logic_table[] = { - {.frequency = 216 * 1000, .cpu_volt = 1200 * 1000, .logic_volt = 1200 * 1000}, - {.frequency = 312 * 1000, .cpu_volt = 1200 * 1000, .logic_volt = 1200 * 1000}, - {.frequency = 408 * 1000, .cpu_volt = 1200 * 1000, .logic_volt = 1200 * 1000}, - {.frequency = 504 * 1000, .cpu_volt = 1200 * 1000, .logic_volt = 1200 * 1000}, - {.frequency = 600 * 1000, .cpu_volt = 1200 * 1000, .logic_volt = 1200 * 1000}, - {.frequency = 696 * 1000, .cpu_volt = 1400 * 1000, .logic_volt = 1200 * 1000}, - {.frequency = 816 * 1000, .cpu_volt = 1400 * 1000, .logic_volt = 1200 * 1000}, - {.frequency = 912 * 1000, .cpu_volt = 1400 * 1000, .logic_volt = 1200 * 1000}, -#if 0 - {.frequency = 1008 * 1000, .cpu_volt = 1400 * 1000, .logic_volt = 1200 * 1000}, - {.frequency = 1104 * 1000, .cpu_volt = 1400 * 1000, .logic_volt = 1200 * 1000}, - {.frequency = 1200 * 1000, .cpu_volt = 1400 * 1000, .logic_volt = 1200 * 1000}, - {.frequency = 1104 * 1000, .cpu_volt = 1400 * 1000, .logic_volt = 1200 * 1000}, - {.frequency = 1248 * 1000, .cpu_volt = 1400 * 1000, .logic_volt = 1200 * 1000}, -#endif - //{.frequency = 1000 * 1000, .cpu_volt = 1225 * 1000, .logic_volt = 1200 * 1000}, - {.frequency = CPUFREQ_TABLE_END}, -}; - -static struct cpufreq_frequency_table dvfs_gpu_table[] = { - {.frequency = 266 * 1000, .index = 1050 * 1000}, - {.frequency = 400 * 1000, .index = 1275 * 1000}, - {.frequency = CPUFREQ_TABLE_END}, -}; - -static struct cpufreq_frequency_table dvfs_ddr_table[] = { - {.frequency = 300 * 1000, .index = 1050 * 1000}, - {.frequency = 400 * 1000, .index = 1125 * 1000}, - {.frequency = CPUFREQ_TABLE_END}, -}; - -#define DVFS_CPU_TABLE_SIZE (ARRAY_SIZE(dvfs_cpu_logic_table)) -static struct cpufreq_frequency_table cpu_dvfs_table[DVFS_CPU_TABLE_SIZE]; -static struct cpufreq_frequency_table dep_cpu2core_table[DVFS_CPU_TABLE_SIZE]; - -void __init board_clock_init(void) -{ - rk2928_clock_data_init(periph_pll_default, codec_pll_default, RK30_CLOCKS_DEFAULT_FLAGS); - dvfs_set_arm_logic_volt(dvfs_cpu_logic_table, cpu_dvfs_table, dep_cpu2core_table); - dvfs_set_freq_volt_table(clk_get(NULL, "gpu"), dvfs_gpu_table); - //dvfs_set_freq_volt_table(clk_get(NULL, "ddr"), dvfs_ddr_table); - printk("%s end\n", __func__); -} - - -MACHINE_START(RK2928, "RK2928board") - .boot_params = PLAT_PHYS_OFFSET + 0x800, - .fixup = rk2928_fixup, - .reserve = &rk2928_reserve, - .map_io = rk2928_map_io, - .init_irq = rk2928_init_irq, - .timer = &rk2928_timer, - .init_machine = rk2928_board_init, -MACHINE_END +/* arch/arm/mach-rk2928/board-rk2928-fpga.c + * + * Copyright (C) 2012 ROCKCHIP, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#if defined(CONFIG_HDMI_RK30) + #include "../../../drivers/video/rockchip/hdmi/rk_hdmi.h" +#endif + +#if defined(CONFIG_SPIM_RK29) +#include "../../../drivers/spi/rk29_spim.h" +#endif + +#include "board-rk2928-sdk-camera.c" +#include "board-rk2928-sdk-key.c" + +int __sramdata g_pmic_type = 0; +#define PMIC_TYPE_TPS65910 2 +#define PMIC_TYPE_ACT8931 3 + +#ifdef CONFIG_THREE_FB_BUFFER +#define RK30_FB0_MEM_SIZE 12*SZ_1M +#else +#define RK30_FB0_MEM_SIZE 8*SZ_1M +#endif + +static struct spi_board_info board_spi_devices[] = { +}; + +/*********************************************************** +* rk30 backlight +************************************************************/ +#ifdef CONFIG_BACKLIGHT_RK29_BL +#define PWM_ID 0 +#define PWM_MUX_NAME GPIO0D2_PWM_0_NAME +#define PWM_MUX_MODE GPIO0D_PWM_0 +#define PWM_MUX_MODE_GPIO GPIO0D_GPIO0D2 +#define PWM_GPIO RK2928_PIN0_PD2 +#define PWM_EFFECT_VALUE 0 + +#define LCD_DISP_ON_PIN + +#ifdef LCD_DISP_ON_PIN + +#define BL_EN_PIN RK2928_PIN3_PC5 +#define BL_EN_VALUE GPIO_HIGH +#endif +static int rk29_backlight_io_init(void) +{ + int ret = 0; + rk30_mux_api_set(PWM_MUX_NAME, PWM_MUX_MODE); +#ifdef LCD_DISP_ON_PIN + // rk30_mux_api_set(BL_EN_MUX_NAME, BL_EN_MUX_MODE); + + ret = gpio_request(BL_EN_PIN, NULL); + if (ret != 0) { + gpio_free(BL_EN_PIN); + } + + gpio_direction_output(BL_EN_PIN, 0); + gpio_set_value(BL_EN_PIN, BL_EN_VALUE); +#endif + return ret; +} + +static int rk29_backlight_io_deinit(void) +{ + int ret = 0; +#ifdef LCD_DISP_ON_PIN + gpio_set_value(BL_EN_PIN, !BL_EN_VALUE); + gpio_free(BL_EN_PIN); +#endif + rk30_mux_api_set(PWM_MUX_NAME, PWM_MUX_MODE_GPIO); + return ret; +} + +static int rk29_backlight_pwm_suspend(void) +{ + int ret = 0; + rk30_mux_api_set(PWM_MUX_NAME, PWM_MUX_MODE_GPIO); + if (gpio_request(PWM_GPIO, NULL)) { + printk("func %s, line %d: request gpio fail\n", __FUNCTION__, __LINE__); + return -1; + } + #if defined(CONFIG_MFD_TPS65910) + if(g_pmic_type == PMIC_TYPE_TPS65910) + { + gpio_direction_output(PWM_GPIO, GPIO_LOW); + } + #endif + #if defined(CONFIG_REGULATOR_ACT8931) + if(g_pmic_type == PMIC_TYPE_ACT8931) + { + gpio_direction_output(PWM_GPIO, GPIO_HIGH); + } + #endif +#ifdef LCD_DISP_ON_PIN + gpio_direction_output(BL_EN_PIN, 0); + gpio_set_value(BL_EN_PIN, !BL_EN_VALUE); +#endif + + return ret; +} + +static int rk29_backlight_pwm_resume(void) +{ + gpio_free(PWM_GPIO); + rk30_mux_api_set(PWM_MUX_NAME, PWM_MUX_MODE); +#ifdef LCD_DISP_ON_PIN + msleep(30); + gpio_direction_output(BL_EN_PIN, 1); + gpio_set_value(BL_EN_PIN, BL_EN_VALUE); +#endif + return 0; +} + +static struct rk29_bl_info rk29_bl_info = { + .pwm_id = PWM_ID, + .min_brightness = 80, + .bl_ref = PWM_EFFECT_VALUE, + .io_init = rk29_backlight_io_init, + .io_deinit = rk29_backlight_io_deinit, + .pwm_suspend = rk29_backlight_pwm_suspend, + .pwm_resume = rk29_backlight_pwm_resume, +}; + +static struct platform_device rk29_device_backlight = { + .name = "rk29_backlight", + .id = -1, + .dev = { + .platform_data = &rk29_bl_info, + } +}; + +#endif + +#ifdef CONFIG_FB_ROCKCHIP + +#define LCD_MUX_NAME GPIO0C2_UART0_RTSN_NAME +#define LCD_GPIO_MODE GPIO0C_GPIO0C2 + +#define LCD_EN RK2928_PIN3_PB3 +#define LCD_EN_VALUE GPIO_LOW + +static int rk_fb_io_init(struct rk29_fb_setting_info *fb_setting) +{ + int ret = 0; + + rk30_mux_api_set(LCD_MUX_NAME, LCD_GPIO_MODE); + + ret = gpio_request(LCD_EN, NULL); + if (ret != 0) + { + gpio_free(LCD_EN); + printk(KERN_ERR "request lcd en pin fail!\n"); + return -1; + } + else + { + gpio_direction_output(LCD_EN, LCD_EN_VALUE); //disable + } + return 0; +} +static int rk_fb_io_disable(void) +{ + + #if 0//defined(CONFIG_REGULATOR_ACT8931) + if(g_pmic_type == PMIC_TYPE_ACT8931) + { + struct regulator *ldo; + ldo = regulator_get(NULL, "act_ldo4"); //vcc_lcd + regulator_disable(ldo); + regulator_put(ldo); + udelay(100); + } + #endif + gpio_set_value(LCD_EN, !LCD_EN_VALUE); + return 0; +} +static int rk_fb_io_enable(void) +{ + #if 0//defined(CONFIG_REGULATOR_ACT8931) + if(g_pmic_type == PMIC_TYPE_ACT8931) + { + struct regulator *ldo; + ldo = regulator_get(NULL, "act_ldo4"); //vcc_lcd + regulator_enable(ldo); + regulator_put(ldo); + udelay(100); + msleep(300); // wait for powering on LED circuit + } + #endif + + gpio_set_value(LCD_EN, LCD_EN_VALUE); + return 0; +} + +#if defined(CONFIG_LCDC_RK2928) +struct rk29fb_info lcdc_screen_info = { + .prop = PRMRY, //primary display device + .io_init = rk_fb_io_init, + .io_disable = rk_fb_io_disable, + .io_enable = rk_fb_io_enable, + .set_screen_info = set_lcd_info, +}; +#endif + +static struct resource resource_fb[] = { + [0] = { + .name = "fb0 buf", + .start = 0, + .end = 0,//RK30_FB0_MEM_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = "ipp buf", //for rotate + .start = 0, + .end = 0,//RK30_FB0_MEM_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [2] = { + .name = "fb2 buf", + .start = 0, + .end = 0,//RK30_FB0_MEM_SIZE - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device device_fb = { + .name = "rk-fb", + .id = -1, + .num_resources = ARRAY_SIZE(resource_fb), + .resource = resource_fb, +}; +#endif + +//LCDC +#ifdef CONFIG_LCDC_RK2928 +static struct resource resource_lcdc[] = { + [0] = { + .name = "lcdc reg", + .start = RK2928_LCDC_PHYS, + .end = RK2928_LCDC_PHYS + RK2928_LCDC_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + + [1] = { + .name = "lcdc irq", + .start = IRQ_LCDC, + .end = IRQ_LCDC, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device device_lcdc = { + .name = "rk2928-lcdc", + .id = 0, + .num_resources = ARRAY_SIZE(resource_lcdc), + .resource = resource_lcdc, + .dev = { + .platform_data = &lcdc_screen_info, + }, +}; +#endif + +#ifdef CONFIG_ION +#define ION_RESERVE_SIZE (80 * SZ_1M) +static struct ion_platform_data rk30_ion_pdata = { + .nr = 1, + .heaps = { + { + .type = ION_HEAP_TYPE_CARVEOUT, + .id = ION_NOR_HEAP_ID, + .name = "norheap", + .size = ION_RESERVE_SIZE, + } + }, +}; + +static struct platform_device device_ion = { + .name = "ion-rockchip", + .id = 0, + .dev = { + .platform_data = &rk30_ion_pdata, + }, +}; +#endif + +#if defined (CONFIG_TOUCHSCREEN_GT811_IIC) +#define TOUCH_RESET_PIN RK2928_PIN3_PC3 +#define TOUCH_INT_PIN RK2928_PIN3_PC7 +int gt811_init_platform_hw(void) +{ + if(gpio_request(TOUCH_RESET_PIN,NULL) != 0){ + gpio_free(TOUCH_RESET_PIN); + printk("gt811_init_platform_hw gpio_request error\n"); + return -EIO; + } + + if(gpio_request(TOUCH_INT_PIN,NULL) != 0){ + gpio_free(TOUCH_INT_PIN); + printk("gt811_init_platform_hw gpio_request error\n"); + return -EIO; + } + //gpio_pull_updown(TOUCH_INT_PIN, 1); + gpio_direction_output(TOUCH_RESET_PIN, 0); + msleep(500); + gpio_set_value(TOUCH_RESET_PIN,GPIO_LOW); + msleep(500); + gpio_set_value(TOUCH_RESET_PIN,GPIO_HIGH); + mdelay(100); + + return 0; +} + + +static struct goodix_platform_data gt811_info = { + .model= 811, + .init_platform_hw= gt811_init_platform_hw, + +}; +#endif + +#if defined(CONFIG_TOUCHSCREEN_SITRONIX_A720) + +#define TOUCH_RESET_PIN RK2928_PIN1_PA3 +#define TOUCH_INT_PIN RK2928_PIN1_PB3 +int ft5306_init_platform_hw(void) +{ + + //printk("ft5306_init_platform_hw\n"); + if(gpio_request(TOUCH_RESET_PIN,NULL) != 0){ + gpio_free(TOUCH_RESET_PIN); + printk("ft5306_init_platform_hw gpio_request error\n"); + return -EIO; + } + + if(gpio_request(TOUCH_INT_PIN,NULL) != 0){ + gpio_free(TOUCH_INT_PIN); + printk("ift5306_init_platform_hw gpio_request error\n"); + return -EIO; + } + gpio_direction_output(TOUCH_RESET_PIN, GPIO_HIGH); + mdelay(10); + gpio_set_value(TOUCH_RESET_PIN,GPIO_LOW); + mdelay(10); + gpio_set_value(TOUCH_RESET_PIN,GPIO_HIGH); + msleep(300); + return 0; + +} + +struct ft5x0x_platform_data sitronix_info = { + .model = 5007, + .init_platform_hw= ft5306_init_platform_hw, +}; +#endif + + + +/*MMA7660 gsensor*/ +#if defined (CONFIG_GS_MMA7660) +#define MMA7660_INT_PIN RK2928_PIN3_PD1 + +static int mma7660_init_platform_hw(void) +{ + rk30_mux_api_set(GPIO1B1_SPI_TXD_UART1_SOUT_NAME, GPIO1B_GPIO1B1); + + return 0; +} + +static struct sensor_platform_data mma7660_info = { + .type = SENSOR_TYPE_ACCEL, + .irq_enable = 1, + .poll_delay_ms = 30, + .init_platform_hw = mma7660_init_platform_hw, + .orientation = {-1, 0, 0, 0, 0, 1, 0, -1, 0}, +}; +#endif + + +#if CONFIG_RK30_PWM_REGULATOR +static int pwm_voltage_map[] = { + 1000000, 1025000, 1050000, 1075000, 1100000, 1125000, 1150000, 1175000, 1200000, 1225000, 1250000, 1275000, 1300000, 1325000, 1350000, 1375000, 1400000 +}; + +static struct regulator_consumer_supply pwm_dcdc1_consumers[] = { + { + .supply = "vdd_core", + } +}; + +struct regulator_init_data pwm_regulator_init_dcdc[1] = +{ + { + .constraints = { + .name = "PWM_DCDC1", + .min_uV = 600000, + .max_uV = 1800000, //0.6-1.8V + .apply_uV = true, + .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE, + }, + .num_consumer_supplies = ARRAY_SIZE(pwm_dcdc1_consumers), + .consumer_supplies = pwm_dcdc1_consumers, + }, +}; + +static struct pwm_platform_data pwm_regulator_info[1] = { + { + .pwm_id = 2, + .pwm_gpio = RK2928_PIN0_PD4, + .pwm_iomux_name = GPIO0D4_PWM_2_NAME, + .pwm_iomux_pwm = GPIO0D_PWM_2, + .pwm_iomux_gpio = GPIO0D_GPIO0D4, + .pwm_voltage = 1200000, + .suspend_voltage = 1050000, + .min_uV = 1000000, + .max_uV = 1400000, + .coefficient = 455, //45.5% + .pwm_voltage_map = pwm_voltage_map, + .init_data = &pwm_regulator_init_dcdc[0], + }, +}; + +struct platform_device pwm_regulator_device[1] = { + { + .name = "pwm-voltage-regulator", + .id = 0, + .dev = { + .platform_data = &pwm_regulator_info[0], + } + }, +}; +#endif + +/*********************************************************** +* usb wifi +************************************************************/ +#if defined(CONFIG_RTL8192CU) || defined(CONFIG_RTL8188EU) + +static void rkusb_wifi_power(int on) { + struct regulator *ldo = NULL; + +#if defined(CONFIG_MFD_TPS65910) + if(g_pmic_type == PMIC_TYPE_TPS65910) { + ldo = regulator_get(NULL, "vmmc"); //vccio_wl + } +#endif +#if defined(CONFIG_REGULATOR_ACT8931) + if(g_pmic_type == PMIC_TYPE_ACT8931) { + ldo = regulator_get(NULL, "act_ldo4"); //vccio_wl + } +#endif + + if(on) { + regulator_enable(ldo); + printk("%s: vccio_wl enable\n", __func__); + } else { + printk("%s: vccio_wl disable\n", __func__); + regulator_disable(ldo); + } + + regulator_put(ldo); + udelay(100); +} + +#endif + +/************************************************************************************************** + * SDMMC devices, include the module of SD,MMC,and sdio.noted by xbw at 2012-03-05 +**************************************************************************************************/ +#ifdef CONFIG_SDMMC_RK29 +#include "board-rk2928-sdk-sdmmc.c" + +#if defined(CONFIG_SDMMC0_RK29_WRITE_PROTECT) +#define SDMMC0_WRITE_PROTECT_PIN RK2928_PIN1_PA7 //According to your own project to set the value of write-protect-pin. +#endif + +#if defined(CONFIG_SDMMC1_RK29_WRITE_PROTECT) +#define SDMMC1_WRITE_PROTECT_PIN RK2928_PIN0_PD5 //According to your own project to set the value of write-protect-pin. +#endif + +#define RK29SDK_WIFI_SDIO_CARD_DETECT_N RK2928_PIN0_PB2 + +#define RK29SDK_SD_CARD_DETECT_N RK2928_PIN2_PA7 //According to your own project to set the value of card-detect-pin. +#define RK29SDK_SD_CARD_INSERT_LEVEL GPIO_LOW // set the voltage of insert-card. Please pay attention to the default setting. + + +#endif //endif ---#ifdef CONFIG_SDMMC_RK29 + +#ifdef CONFIG_SDMMC0_RK29 +static int rk29_sdmmc0_cfg_gpio(void) +{ + rk29_sdmmc_set_iomux(0, 0xFFFF); + +#if defined(CONFIG_SDMMC0_RK29_SDCARD_DET_FROM_GPIO) + rk30_mux_api_set(GPIO1C1_MMC0_DETN_NAME, GPIO1C_GPIO1C1); + // gpio_request(RK29SDK_SD_CARD_DETECT_N, "sd-detect"); + // gpio_direction_output(RK29SDK_SD_CARD_DETECT_N,GPIO_HIGH);//set mmc0-data1 to high. +#else + rk30_mux_api_set(GPIO1C1_MMC0_DETN_NAME, GPIO1C_MMC0_DETN); +#endif + +#if defined(CONFIG_SDMMC0_RK29_WRITE_PROTECT) + gpio_request(SDMMC0_WRITE_PROTECT_PIN, "sdmmc-wp"); + gpio_direction_input(SDMMC0_WRITE_PROTECT_PIN); +#endif + + return 0; +} + +#define CONFIG_SDMMC0_USE_DMA +struct rk29_sdmmc_platform_data default_sdmmc0_data = { + .host_ocr_avail = + (MMC_VDD_25_26 | MMC_VDD_26_27 | MMC_VDD_27_28 | MMC_VDD_28_29 | + MMC_VDD_29_30 | MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 | + MMC_VDD_33_34 | MMC_VDD_34_35 | MMC_VDD_35_36), + .host_caps = + (MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), + .io_init = rk29_sdmmc0_cfg_gpio, + +#if !defined(CONFIG_SDMMC_RK29_OLD) + .set_iomux = rk29_sdmmc_set_iomux, +#endif + + .dma_name = "sd_mmc", +#ifdef CONFIG_SDMMC0_USE_DMA + .use_dma = 1, +#else + .use_dma = 0, +#endif + +#if defined(CONFIG_SDMMC0_RK29_SDCARD_DET_FROM_GPIO) + .detect_irq = RK29SDK_SD_CARD_DETECT_N, + .insert_card_level = RK29SDK_SD_CARD_INSERT_LEVEL, +#else + .detect_irq = INVALID_GPIO, +#endif + + .enable_sd_wakeup = 0, + +#if defined(CONFIG_SDMMC0_RK29_WRITE_PROTECT) + .write_prt = SDMMC0_WRITE_PROTECT_PIN, +#else + .write_prt = INVALID_GPIO, +#endif +}; +#endif // CONFIG_SDMMC0_RK29 + +#ifdef CONFIG_SND_SOC_RK2928 +static struct resource resources_acodec[] = { + { + .start = RK2928_ACODEC_PHYS, + .end = RK2928_ACODEC_PHYS + RK2928_ACODEC_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = RK2928_PIN3_PD4, + .end = RK2928_PIN3_PD4, + .flags = IORESOURCE_IO, + }, +}; + +static struct platform_device device_acodec = { + .name = "rk2928-codec", + .id = -1, + .num_resources = ARRAY_SIZE(resources_acodec), + .resource = resources_acodec, +}; +#endif + +#ifdef CONFIG_BATTERY_RK30_ADC_FAC +static struct rk30_adc_battery_platform_data rk30_adc_battery_platdata = { + .dc_det_pin = RK2928_PIN1_PB4,//INVALID_GPIO, + .batt_low_pin = INVALID_GPIO, + .charge_set_pin = INVALID_GPIO, + .charge_ok_pin = RK2928_PIN1_PA0, + .dc_det_level = GPIO_LOW, + .charge_ok_level = GPIO_HIGH, +}; + +static struct platform_device rk30_device_adc_battery = { + .name = "rk30-battery", + .id = -1, + .dev = { + .platform_data = &rk30_adc_battery_platdata, + }, +}; +#endif + +static struct platform_device *devices[] __initdata = { +#ifdef CONFIG_FB_ROCKCHIP + &device_fb, +#endif +#ifdef CONFIG_LCDC_RK2928 + &device_lcdc, +#endif +#ifdef CONFIG_BACKLIGHT_RK29_BL + &rk29_device_backlight, +#endif +#ifdef CONFIG_ION + &device_ion, +#endif +#ifdef CONFIG_SND_SOC_RK2928 + &device_acodec, +#endif +#ifdef CONFIG_BATTERY_RK30_ADC_FAC + &rk30_device_adc_battery, +#endif +}; +//i2c +#ifdef CONFIG_I2C0_RK30 +#ifdef CONFIG_MFD_TPS65910 +#define TPS65910_HOST_IRQ RK2928_PIN1_PB2 +#include "board-rk2928-sdk-tps65910.c" +#endif +#ifdef CONFIG_REGULATOR_ACT8931 +#define ACT8931_HOST_IRQ RK2928_PIN3_PC6 +#include "board-rk2928-sdk-act8931.c" +#endif + +static struct i2c_board_info __initdata i2c0_info[] = { +#if defined (CONFIG_MFD_TPS65910) + { + .type = "tps65910", + .addr = TPS65910_I2C_ID0, + .flags = 0, + .irq = TPS65910_HOST_IRQ, + .platform_data = &tps65910_data, + }, +#endif +#if defined (CONFIG_REGULATOR_ACT8931) + { + .type = "act8931", + .addr = 0x5b, + .flags = 0, + .irq = ACT8931_HOST_IRQ, + .platform_data=&act8931_data, + }, +#endif +#ifdef CONFIG_MACH_RK2926_M713 +#if defined (CONFIG_RTC_HYM8563) + { + .type = "rtc_hym8563", + .addr = 0x51, + .flags = 0, + .irq = RK2928_PIN1_PA5, + }, +#endif +#endif +}; +#endif + +int __sramdata gpio0d4_iomux,gpio0d4_do,gpio0d4_dir; + +#define gpio0_readl(offset) readl_relaxed(RK2928_GPIO0_BASE + offset) +#define gpio0_writel(v, offset) do { writel_relaxed(v, RK2928_GPIO0_BASE + offset); dsb(); } while (0) + +void __sramfunc rk30_pwm_logic_suspend_voltage(void) +{ +#ifdef CONFIG_RK30_PWM_REGULATOR + +// int gpio0d7_iomux,gpio0d7_do,gpio0d7_dir,gpio0d7_en; + sram_udelay(10000); + gpio0d4_iomux = readl_relaxed(GRF_GPIO0D_IOMUX); + gpio0d4_do = gpio0_readl(GPIO_SWPORTA_DR); + gpio0d4_dir = gpio0_readl(GPIO_SWPORTA_DDR); + + writel_relaxed((gpio0d4_iomux |(1<<24)) & (~(1<<8)), GRF_GPIO0D_IOMUX); + gpio0_writel(gpio0d4_dir |(1<<28), GPIO_SWPORTA_DDR); + gpio0_writel(gpio0d4_do |(1<<28), GPIO_SWPORTA_DR); + +#endif +} +void __sramfunc rk30_pwm_logic_resume_voltage(void) +{ +#ifdef CONFIG_RK30_PWM_REGULATOR + writel_relaxed((1<<24)|gpio0d4_iomux, GRF_GPIO0D_IOMUX); + gpio0_writel(gpio0d4_dir, GPIO_SWPORTA_DDR); + gpio0_writel(gpio0d4_do, GPIO_SWPORTA_DR); + sram_udelay(10000); + +#endif + +} +extern void pwm_suspend_voltage(void); +extern void pwm_resume_voltage(void); +void rk30_pwm_suspend_voltage_set(void) +{ +#ifdef CONFIG_RK30_PWM_REGULATOR + pwm_suspend_voltage(); +#endif +} +void rk30_pwm_resume_voltage_set(void) +{ +#ifdef CONFIG_RK30_PWM_REGULATOR + pwm_resume_voltage(); +#endif +} + +void __sramfunc board_pmu_suspend(void) +{ + #if defined (CONFIG_MFD_TPS65910) + if(g_pmic_type == PMIC_TYPE_TPS65910) + board_pmu_tps65910_suspend(); + #endif +} +void __sramfunc board_pmu_resume(void) +{ + #if defined (CONFIG_MFD_TPS65910) + if(g_pmic_type == PMIC_TYPE_TPS65910) + board_pmu_tps65910_resume(); + #endif +} + +#ifdef CONFIG_I2C1_RK30 +static struct i2c_board_info __initdata i2c1_info[] = { +#if defined (CONFIG_GS_MMA7660) + { + .type = "gs_mma7660", + .addr = 0x4c, + .flags = 0, + .irq = MMA7660_INT_PIN, + .platform_data = &mma7660_info, + }, +#endif + +}; +#endif +#ifdef CONFIG_I2C2_RK30 +static struct i2c_board_info __initdata i2c2_info[] = { + +#if defined (CONFIG_TOUCHSCREEN_GT811_IIC) + { + .type = "gt811_ts", + .addr = 0x5d, + .flags = 0, + .irq = TOUCH_INT_PIN, + .platform_data = >811_info, + }, +#endif + +#if defined (CONFIG_TOUCHSCREEN_SITRONIX_A720) +{ + .type ="sitronix", + .addr = 0x60, + .flags = 0, + .irq = TOUCH_INT_PIN, + .platform_data = &sitronix_info, +}, +#endif +}; +#endif +#ifdef CONFIG_I2C3_RK30 +static struct i2c_board_info __initdata i2c3_info[] = { +}; +#endif +#ifdef CONFIG_I2C_GPIO_RK30 +#define I2C_SDA_PIN INVALID_GPIO //set sda_pin here +#define I2C_SCL_PIN INVALID_GPIO //set scl_pin here +static int rk30_i2c_io_init(void) +{ + //set iomux (gpio) here + + return 0; +} +struct i2c_gpio_platform_data default_i2c_gpio_data = { + .sda_pin = I2C_SDA_PIN, + .scl_pin = I2C_SCL_PIN, + .udelay = 5, // clk = 500/udelay = 100Khz + .timeout = 100,//msecs_to_jiffies(100), + .bus_num = 5, + .io_init = rk30_i2c_io_init, +}; +static struct i2c_board_info __initdata i2c_gpio_info[] = { +}; +#endif +static void __init rk30_i2c_register_board_info(void) +{ +#ifdef CONFIG_I2C0_RK30 + i2c_register_board_info(0, i2c0_info, ARRAY_SIZE(i2c0_info)); +#endif +#ifdef CONFIG_I2C1_RK30 + i2c_register_board_info(1, i2c1_info, ARRAY_SIZE(i2c1_info)); +#endif +#ifdef CONFIG_I2C2_RK30 + i2c_register_board_info(2, i2c2_info, ARRAY_SIZE(i2c2_info)); +#endif +#ifdef CONFIG_I2C3_RK30 + i2c_register_board_info(3, i2c3_info, ARRAY_SIZE(i2c3_info)); +#endif +#ifdef CONFIG_I2C_GPIO_RK30 + i2c_register_board_info(4, i2c_gpio_info, ARRAY_SIZE(i2c_gpio_info)); +#endif +} +//end of i2c + +#define POWER_ON_PIN RK2928_PIN1_PA1 //power_hold +#if defined(CONFIG_REGULATOR_ACT8931) +extern int act8931_charge_det ; +#endif +static void rk2928_pm_power_off(void) +{ + printk(KERN_ERR "rk2928_pm_power_off start...\n"); + + #if defined(CONFIG_REGULATOR_ACT8931) + if(g_pmic_type == PMIC_TYPE_ACT8931) + { + #ifdef CONFIG_BATTERY_RK30_ADC_FAC + if (gpio_get_value (rk30_adc_battery_platdata.dc_det_pin) == rk30_adc_battery_platdata.dc_det_level)//if(act8931_charge_det) + #endif + arm_pm_restart(0, NULL); + } + #endif + + #if defined(CONFIG_MFD_TPS65910) + if(g_pmic_type == PMIC_TYPE_TPS65910) + { + tps65910_device_shutdown();//tps65910 shutdown + } + #endif + gpio_direction_output(POWER_ON_PIN, GPIO_LOW); + +}; + +static void __init rk2928_board_init(void) +{ + gpio_request(POWER_ON_PIN, "poweronpin"); + gpio_direction_output(POWER_ON_PIN, GPIO_HIGH); + + pm_power_off = rk2928_pm_power_off; + + rk30_i2c_register_board_info(); + spi_register_board_info(board_spi_devices, ARRAY_SIZE(board_spi_devices)); + platform_add_devices(devices, ARRAY_SIZE(devices)); + +} + +static void __init rk2928_reserve(void) +{ +#ifdef CONFIG_ION + rk30_ion_pdata.heaps[0].base = board_mem_reserve_add("ion", ION_RESERVE_SIZE); +#endif +#ifdef CONFIG_FB_ROCKCHIP + resource_fb[0].start = board_mem_reserve_add("fb0", RK30_FB0_MEM_SIZE); + resource_fb[0].end = resource_fb[0].start + RK30_FB0_MEM_SIZE - 1; +#endif +#ifdef CONFIG_VIDEO_RK29 + rk30_camera_request_reserve_mem(); +#endif + board_mem_reserved(); +} +/** + * dvfs_cpu_logic_table: table for arm and logic dvfs + * @frequency : arm frequency + * @cpu_volt : arm voltage depend on frequency + * @logic_volt : logic voltage arm requests depend on frequency + * comments : min arm/logic voltage + */ +static struct dvfs_arm_table dvfs_cpu_logic_table[] = { + {.frequency = 216 * 1000, .cpu_volt = 850 * 1000, .logic_volt = 1200 * 1000}, + {.frequency = 312 * 1000, .cpu_volt = 900 * 1000, .logic_volt = 1200 * 1000}, + {.frequency = 408 * 1000, .cpu_volt = 950 * 1000, .logic_volt = 1200 * 1000}, + {.frequency = 504 * 1000, .cpu_volt = 1000 * 1000, .logic_volt = 1200 * 1000}, + {.frequency = 600 * 1000, .cpu_volt = 1100 * 1000, .logic_volt = 1200 * 1000}, + {.frequency = 696 * 1000, .cpu_volt = 1175 * 1000, .logic_volt = 1200 * 1000}, + {.frequency = 816 * 1000, .cpu_volt = 1250 * 1000, .logic_volt = 1200 * 1000}, + {.frequency = 912 * 1000, .cpu_volt = 1350 * 1000, .logic_volt = 1200 * 1000}, + {.frequency = 1008 * 1000, .cpu_volt = 1450 * 1000, .logic_volt = 1200 * 1000}, +#if 0 + {.frequency = 1104 * 1000, .cpu_volt = 1400 * 1000, .logic_volt = 1200 * 1000}, + {.frequency = 1200 * 1000, .cpu_volt = 1400 * 1000, .logic_volt = 1200 * 1000}, + {.frequency = 1104 * 1000, .cpu_volt = 1400 * 1000, .logic_volt = 1200 * 1000}, + {.frequency = 1248 * 1000, .cpu_volt = 1400 * 1000, .logic_volt = 1200 * 1000}, +#endif + {.frequency = CPUFREQ_TABLE_END}, +}; + +static struct cpufreq_frequency_table dvfs_gpu_table[] = { + {.frequency = 266 * 1000, .index = 1050 * 1000}, + {.frequency = 400 * 1000, .index = 1275 * 1000}, + {.frequency = CPUFREQ_TABLE_END}, +}; + +static struct cpufreq_frequency_table dvfs_ddr_table[] = { + {.frequency = 300 * 1000, .index = 1050 * 1000}, + {.frequency = 400 * 1000, .index = 1125 * 1000}, + {.frequency = CPUFREQ_TABLE_END}, +}; + +#define DVFS_CPU_TABLE_SIZE (ARRAY_SIZE(dvfs_cpu_logic_table)) +static struct cpufreq_frequency_table cpu_dvfs_table[DVFS_CPU_TABLE_SIZE]; +static struct cpufreq_frequency_table dep_cpu2core_table[DVFS_CPU_TABLE_SIZE]; + +void __init board_clock_init(void) +{ + rk2928_clock_data_init(periph_pll_default, codec_pll_default, RK30_CLOCKS_DEFAULT_FLAGS); + dvfs_set_arm_logic_volt(dvfs_cpu_logic_table, cpu_dvfs_table, dep_cpu2core_table); + dvfs_set_freq_volt_table(clk_get(NULL, "gpu"), dvfs_gpu_table); + //dvfs_set_freq_volt_table(clk_get(NULL, "ddr"), dvfs_ddr_table); + printk("%s end\n", __func__); +} + + +MACHINE_START(RK2928, "RK2928board") + .boot_params = PLAT_PHYS_OFFSET + 0x800, + .fixup = rk2928_fixup, + .reserve = &rk2928_reserve, + .map_io = rk2928_map_io, + .init_irq = rk2928_init_irq, + .timer = &rk2928_timer, + .init_machine = rk2928_board_init, +MACHINE_END diff --git a/arch/arm/mach-rk2928/board-rk2928-tb-camera.c b/arch/arm/mach-rk2928/board-rk2928-tb-camera.c new file mode 100644 index 000000000000..ad549249f5c2 --- /dev/null +++ b/arch/arm/mach-rk2928/board-rk2928-tb-camera.c @@ -0,0 +1,448 @@ +#ifdef CONFIG_VIDEO_RK29 +/*---------------- Camera Sensor Macro Define Begin ------------------------*/ +/*---------------- Camera Sensor Configuration Macro Begin ------------------------*/ +#define CONFIG_SENSOR_0 RK29_CAM_SENSOR_OV5642 /* back camera sensor */ +#define CONFIG_SENSOR_IIC_ADDR_0 0x78// 0 +#define CONFIG_SENSOR_IIC_ADAPTER_ID_0 0 +#define CONFIG_SENSOR_CIF_INDEX_0 0 +#define CONFIG_SENSOR_ORIENTATION_0 90 +#define CONFIG_SENSOR_POWER_PIN_0 INVALID_GPIO +#define CONFIG_SENSOR_RESET_PIN_0 INVALID_GPIO +#define CONFIG_SENSOR_POWERDN_PIN_0 RK2928_PIN3_PB3 +#define CONFIG_SENSOR_FALSH_PIN_0 INVALID_GPIO +#define CONFIG_SENSOR_POWERACTIVE_LEVEL_0 RK29_CAM_POWERACTIVE_L +#define CONFIG_SENSOR_RESETACTIVE_LEVEL_0 RK29_CAM_RESETACTIVE_L +#define CONFIG_SENSOR_POWERDNACTIVE_LEVEL_0 RK29_CAM_POWERDNACTIVE_H +#define CONFIG_SENSOR_FLASHACTIVE_LEVEL_0 RK29_CAM_FLASHACTIVE_L + +#define CONFIG_SENSOR_QCIF_FPS_FIXED_0 15000 +#define CONFIG_SENSOR_240X160_FPS_FIXED_0 15000 +#define CONFIG_SENSOR_QVGA_FPS_FIXED_0 15000 +#define CONFIG_SENSOR_CIF_FPS_FIXED_0 15000 +#define CONFIG_SENSOR_VGA_FPS_FIXED_0 15000 +#define CONFIG_SENSOR_480P_FPS_FIXED_0 15000 +#define CONFIG_SENSOR_SVGA_FPS_FIXED_0 15000 +#define CONFIG_SENSOR_720P_FPS_FIXED_0 30000 + +#define CONFIG_SENSOR_01 RK29_CAM_SENSOR_OV5642 /* back camera sensor 1 */ +#define CONFIG_SENSOR_IIC_ADDR_01 0x00 +#define CONFIG_SENSOR_CIF_INDEX_01 0 +#define CONFIG_SENSOR_IIC_ADAPTER_ID_01 4 +#define CONFIG_SENSOR_ORIENTATION_01 90 +#define CONFIG_SENSOR_POWER_PIN_01 INVALID_GPIO +#define CONFIG_SENSOR_RESET_PIN_01 INVALID_GPIO +#define CONFIG_SENSOR_POWERDN_PIN_01 RK2928_PIN3_PB3 +#define CONFIG_SENSOR_FALSH_PIN_01 INVALID_GPIO +#define CONFIG_SENSOR_POWERACTIVE_LEVEL_01 RK29_CAM_POWERACTIVE_L +#define CONFIG_SENSOR_RESETACTIVE_LEVEL_01 RK29_CAM_RESETACTIVE_L +#define CONFIG_SENSOR_POWERDNACTIVE_LEVEL_01 RK29_CAM_POWERDNACTIVE_H +#define CONFIG_SENSOR_FLASHACTIVE_LEVEL_01 RK29_CAM_FLASHACTIVE_L + +#define CONFIG_SENSOR_QCIF_FPS_FIXED_01 15000 +#define CONFIG_SENSOR_240X160_FPS_FIXED_01 15000 +#define CONFIG_SENSOR_QVGA_FPS_FIXED_01 15000 +#define CONFIG_SENSOR_CIF_FPS_FIXED_01 15000 +#define CONFIG_SENSOR_VGA_FPS_FIXED_01 15000 +#define CONFIG_SENSOR_480P_FPS_FIXED_01 15000 +#define CONFIG_SENSOR_SVGA_FPS_FIXED_01 15000 +#define CONFIG_SENSOR_720P_FPS_FIXED_01 30000 + +#define CONFIG_SENSOR_02 RK29_CAM_SENSOR_OV5640 /* back camera sensor 2 */ +#define CONFIG_SENSOR_IIC_ADDR_02 0x00 +#define CONFIG_SENSOR_CIF_INDEX_02 0 +#define CONFIG_SENSOR_IIC_ADAPTER_ID_02 4 +#define CONFIG_SENSOR_ORIENTATION_02 90 +#define CONFIG_SENSOR_POWER_PIN_02 INVALID_GPIO +#define CONFIG_SENSOR_RESET_PIN_02 INVALID_GPIO +#define CONFIG_SENSOR_POWERDN_PIN_02 RK2928_PIN3_PB3 +#define CONFIG_SENSOR_FALSH_PIN_02 INVALID_GPIO +#define CONFIG_SENSOR_POWERACTIVE_LEVEL_02 RK29_CAM_POWERACTIVE_L +#define CONFIG_SENSOR_RESETACTIVE_LEVEL_02 RK29_CAM_RESETACTIVE_L +#define CONFIG_SENSOR_POWERDNACTIVE_LEVEL_02 RK29_CAM_POWERDNACTIVE_H +#define CONFIG_SENSOR_FLASHACTIVE_LEVEL_02 RK29_CAM_FLASHACTIVE_L + +#define CONFIG_SENSOR_QCIF_FPS_FIXED_02 15000 +#define CONFIG_SENSOR_240X160_FPS_FIXED_02 15000 +#define CONFIG_SENSOR_QVGA_FPS_FIXED_02 15000 +#define CONFIG_SENSOR_CIF_FPS_FIXED_02 15000 +#define CONFIG_SENSOR_VGA_FPS_FIXED_02 15000 +#define CONFIG_SENSOR_480P_FPS_FIXED_02 15000 +#define CONFIG_SENSOR_SVGA_FPS_FIXED_02 15000 +#define CONFIG_SENSOR_720P_FPS_FIXED_02 30000 + +#define CONFIG_SENSOR_1 RK29_CAM_SENSOR_OV2659 /* front camera sensor 0 */ +#define CONFIG_SENSOR_IIC_ADDR_1 0// 0x60 +#define CONFIG_SENSOR_IIC_ADAPTER_ID_1 3 +#define CONFIG_SENSOR_CIF_INDEX_1 0 +#define CONFIG_SENSOR_ORIENTATION_1 270 +#define CONFIG_SENSOR_POWER_PIN_1 INVALID_GPIO +#define CONFIG_SENSOR_RESET_PIN_1 INVALID_GPIO +#define CONFIG_SENSOR_POWERDN_PIN_1 RK2928_PIN3_PB3 +#define CONFIG_SENSOR_FALSH_PIN_1 INVALID_GPIO +#define CONFIG_SENSOR_POWERACTIVE_LEVEL_1 RK29_CAM_POWERACTIVE_L +#define CONFIG_SENSOR_RESETACTIVE_LEVEL_1 RK29_CAM_RESETACTIVE_L +#define CONFIG_SENSOR_POWERDNACTIVE_LEVEL_1 RK29_CAM_POWERDNACTIVE_H +#define CONFIG_SENSOR_FLASHACTIVE_LEVEL_1 RK29_CAM_FLASHACTIVE_L + +#define CONFIG_SENSOR_QCIF_FPS_FIXED_1 15000 +#define CONFIG_SENSOR_240X160_FPS_FIXED_1 15000 +#define CONFIG_SENSOR_QVGA_FPS_FIXED_1 15000 +#define CONFIG_SENSOR_CIF_FPS_FIXED_1 15000 +#define CONFIG_SENSOR_VGA_FPS_FIXED_1 15000 +#define CONFIG_SENSOR_480P_FPS_FIXED_1 15000 +#define CONFIG_SENSOR_SVGA_FPS_FIXED_1 15000 +#define CONFIG_SENSOR_720P_FPS_FIXED_1 30000 + +#define CONFIG_SENSOR_11 RK29_CAM_SENSOR_OV2659 /* front camera sensor 1 */ +#define CONFIG_SENSOR_IIC_ADDR_11 0x00 +#define CONFIG_SENSOR_IIC_ADAPTER_ID_11 3 +#define CONFIG_SENSOR_CIF_INDEX_11 0 +#define CONFIG_SENSOR_ORIENTATION_11 270 +#define CONFIG_SENSOR_POWER_PIN_11 INVALID_GPIO +#define CONFIG_SENSOR_RESET_PIN_11 INVALID_GPIO +#define CONFIG_SENSOR_POWERDN_PIN_11 INVALID_GPIO +#define CONFIG_SENSOR_FALSH_PIN_11 INVALID_GPIO +#define CONFIG_SENSOR_POWERACTIVE_LEVEL_11 RK29_CAM_POWERACTIVE_L +#define CONFIG_SENSOR_RESETACTIVE_LEVEL_11 RK29_CAM_RESETACTIVE_L +#define CONFIG_SENSOR_POWERDNACTIVE_LEVEL_11 RK29_CAM_POWERDNACTIVE_H +#define CONFIG_SENSOR_FLASHACTIVE_LEVEL_11 RK29_CAM_FLASHACTIVE_L + +#define CONFIG_SENSOR_QCIF_FPS_FIXED_11 15000 +#define CONFIG_SENSOR_240X160_FPS_FIXED_11 15000 +#define CONFIG_SENSOR_QVGA_FPS_FIXED_11 15000 +#define CONFIG_SENSOR_CIF_FPS_FIXED_11 15000 +#define CONFIG_SENSOR_VGA_FPS_FIXED_11 15000 +#define CONFIG_SENSOR_480P_FPS_FIXED_11 15000 +#define CONFIG_SENSOR_SVGA_FPS_FIXED_11 15000 +#define CONFIG_SENSOR_720P_FPS_FIXED_11 30000 + +#define CONFIG_SENSOR_12 RK29_CAM_SENSOR_OV2659//RK29_CAM_SENSOR_OV2655 /* front camera sensor 2 */ +#define CONFIG_SENSOR_IIC_ADDR_12 0x00 +#define CONFIG_SENSOR_IIC_ADAPTER_ID_12 3 +#define CONFIG_SENSOR_CIF_INDEX_12 0 +#define CONFIG_SENSOR_ORIENTATION_12 270 +#define CONFIG_SENSOR_POWER_PIN_12 INVALID_GPIO +#define CONFIG_SENSOR_RESET_PIN_12 INVALID_GPIO +#define CONFIG_SENSOR_POWERDN_PIN_12 INVALID_GPIO +#define CONFIG_SENSOR_FALSH_PIN_12 INVALID_GPIO +#define CONFIG_SENSOR_POWERACTIVE_LEVEL_12 RK29_CAM_POWERACTIVE_L +#define CONFIG_SENSOR_RESETACTIVE_LEVEL_12 RK29_CAM_RESETACTIVE_L +#define CONFIG_SENSOR_POWERDNACTIVE_LEVEL_12 RK29_CAM_POWERDNACTIVE_H +#define CONFIG_SENSOR_FLASHACTIVE_LEVEL_12 RK29_CAM_FLASHACTIVE_L + +#define CONFIG_SENSOR_QCIF_FPS_FIXED_12 15000 +#define CONFIG_SENSOR_240X160_FPS_FIXED_12 15000 +#define CONFIG_SENSOR_QVGA_FPS_FIXED_12 15000 +#define CONFIG_SENSOR_CIF_FPS_FIXED_12 15000 +#define CONFIG_SENSOR_VGA_FPS_FIXED_12 15000 +#define CONFIG_SENSOR_480P_FPS_FIXED_12 15000 +#define CONFIG_SENSOR_SVGA_FPS_FIXED_12 15000 +#define CONFIG_SENSOR_720P_FPS_FIXED_12 30000 + + +#endif //#ifdef CONFIG_VIDEO_RK29 +/*---------------- Camera Sensor Configuration Macro End------------------------*/ +#include "../../../drivers/media/video/rk2928_camera.c" +/*---------------- Camera Sensor Macro Define End ---------*/ + +#define PMEM_CAM_SIZE PMEM_CAM_NECESSARY +/***************************************************************************************** + * camera devices + * author: ddl@rock-chips.com + *****************************************************************************************/ +#ifdef CONFIG_VIDEO_RK29 +#define CONFIG_SENSOR_POWER_IOCTL_USR 0 //define this refer to your board layout +#define CONFIG_SENSOR_RESET_IOCTL_USR 0 +#define CONFIG_SENSOR_POWERDOWN_IOCTL_USR 0 +#define CONFIG_SENSOR_FLASH_IOCTL_USR 0 + +static void rk_cif_power(int on) +{ + struct regulator *ldo_18,*ldo_28; + ldo_28 = regulator_get(NULL, "ldo7"); // vcc28_cif + ldo_18 = regulator_get(NULL, "ldo1"); // vcc18_cif + if (ldo_28 == NULL || IS_ERR(ldo_28) || ldo_18 == NULL || IS_ERR(ldo_18)){ + printk("get cif ldo failed!\n"); + return; + } + if(on == 0){ + regulator_disable(ldo_28); + regulator_put(ldo_28); + regulator_disable(ldo_18); + regulator_put(ldo_18); + mdelay(500); + } + else{ + regulator_set_voltage(ldo_28, 2800000, 2800000); + regulator_enable(ldo_28); + // printk("%s set ldo7 vcc28_cif=%dmV end\n", __func__, regulator_get_voltage(ldo_28)); + regulator_put(ldo_28); + + regulator_set_voltage(ldo_18, 1800000, 1800000); + // regulator_set_suspend_voltage(ldo, 1800000); + regulator_enable(ldo_18); + // printk("%s set ldo1 vcc18_cif=%dmV end\n", __func__, regulator_get_voltage(ldo_18)); + regulator_put(ldo_18); + } +} + +#if CONFIG_SENSOR_POWER_IOCTL_USR +static int sensor_power_usr_cb (struct rk29camera_gpio_res *res,int on) +{ + //#error "CONFIG_SENSOR_POWER_IOCTL_USR is 1, sensor_power_usr_cb function must be writed!!"; + rk_cif_power(on); +} +#endif + +#if CONFIG_SENSOR_RESET_IOCTL_USR +static int sensor_reset_usr_cb (struct rk29camera_gpio_res *res,int on) +{ + #error "CONFIG_SENSOR_RESET_IOCTL_USR is 1, sensor_reset_usr_cb function must be writed!!"; +} +#endif + +#if CONFIG_SENSOR_POWERDOWN_IOCTL_USR +static int sensor_powerdown_usr_cb (struct rk29camera_gpio_res *res,int on) +{ + #error "CONFIG_SENSOR_POWERDOWN_IOCTL_USR is 1, sensor_powerdown_usr_cb function must be writed!!"; +} +#endif + +#if CONFIG_SENSOR_FLASH_IOCTL_USR +static int sensor_flash_usr_cb (struct rk29camera_gpio_res *res,int on) +{ + #error "CONFIG_SENSOR_FLASH_IOCTL_USR is 1, sensor_flash_usr_cb function must be writed!!"; +} +#endif + +static struct rk29camera_platform_ioctl_cb sensor_ioctl_cb = { + #if CONFIG_SENSOR_POWER_IOCTL_USR + .sensor_power_cb = sensor_power_usr_cb, + #else + .sensor_power_cb = NULL, + #endif + + #if CONFIG_SENSOR_RESET_IOCTL_USR + .sensor_reset_cb = sensor_reset_usr_cb, + #else + .sensor_reset_cb = NULL, + #endif + + #if CONFIG_SENSOR_POWERDOWN_IOCTL_USR + .sensor_powerdown_cb = sensor_powerdown_usr_cb, + #else + .sensor_powerdown_cb = NULL, + #endif + + #if CONFIG_SENSOR_FLASH_IOCTL_USR + .sensor_flash_cb = sensor_flash_usr_cb, + #else + .sensor_flash_cb = NULL, + #endif +}; + +#if CONFIG_SENSOR_IIC_ADDR_0 +static struct reginfo_t rk_init_data_sensor_reg_0[] = +{ + {0x0000, 0x00,0,0} + }; +static struct reginfo_t rk_init_data_sensor_winseqreg_0[] ={ + {0x0000, 0x00,0,0} + }; +#endif + +#if CONFIG_SENSOR_IIC_ADDR_1 +static struct reginfo_t rk_init_data_sensor_reg_1[] = +{ + {0x0000, 0x00,0,0} +}; +static struct reginfo_t rk_init_data_sensor_winseqreg_1[] = +{ + {0x0000, 0x00,0,0} +}; +#endif +#if CONFIG_SENSOR_IIC_ADDR_01 +static struct reginfo_t rk_init_data_sensor_reg_01[] = +{ + {0x0000, 0x00,0,0} +}; +static struct reginfo_t rk_init_data_sensor_winseqreg_01[] = +{ + {0x0000, 0x00,0,0} +}; +#endif +#if CONFIG_SENSOR_IIC_ADDR_02 +static struct reginfo_t rk_init_data_sensor_reg_02[] = +{ + {0x0000, 0x00,0,0} +}; +static struct reginfo_t rk_init_data_sensor_winseqreg_02[] = +{ + {0x0000, 0x00,0,0} +}; +#endif +#if CONFIG_SENSOR_IIC_ADDR_11 +static struct reginfo_t rk_init_data_sensor_reg_11[] = +{ + {0x0000, 0x00,0,0} +}; +static struct reginfo_t rk_init_data_sensor_winseqreg_11[] = +{ + {0x0000, 0x00,0,0} +}; +#endif +#if CONFIG_SENSOR_IIC_ADDR_12 +static struct reginfo_t rk_init_data_sensor_reg_12[] = +{ + {0x0000, 0x00,0,0} +}; +static struct reginfo_t rk_init_data_sensor_winseqreg_12[] = +{ + {0x0000, 0x00,0,0} +}; +#endif +static rk_sensor_user_init_data_s rk_init_data_sensor[RK_CAM_NUM] = +{ + #if CONFIG_SENSOR_IIC_ADDR_0 + { + .rk_sensor_init_width = INVALID_VALUE, + .rk_sensor_init_height = INVALID_VALUE, + .rk_sensor_init_bus_param = INVALID_VALUE, + .rk_sensor_init_pixelcode = INVALID_VALUE, + .rk_sensor_init_data = rk_init_data_sensor_reg_0, + .rk_sensor_init_winseq = rk_init_data_sensor_winseqreg_0, + .rk_sensor_winseq_size = sizeof(rk_init_data_sensor_winseqreg_0) / sizeof(struct reginfo_t), + .rk_sensor_init_data_size = sizeof(rk_init_data_sensor_reg_0) / sizeof(struct reginfo_t), + }, + #else + { + .rk_sensor_init_width = INVALID_VALUE, + .rk_sensor_init_height = INVALID_VALUE, + .rk_sensor_init_bus_param = INVALID_VALUE, + .rk_sensor_init_pixelcode = INVALID_VALUE, + .rk_sensor_init_data = NULL, + .rk_sensor_init_winseq = NULL, + .rk_sensor_winseq_size = 0, + .rk_sensor_init_data_size = 0, + }, + #endif + #if CONFIG_SENSOR_IIC_ADDR_1 + { + .rk_sensor_init_width = INVALID_VALUE, + .rk_sensor_init_height = INVALID_VALUE, + .rk_sensor_init_bus_param = INVALID_VALUE, + .rk_sensor_init_pixelcode = INVALID_VALUE, + .rk_sensor_init_data = rk_init_data_sensor_reg_1, + .rk_sensor_init_winseq = rk_init_data_sensor_winseqreg_1, + .rk_sensor_winseq_size = sizeof(rk_init_data_sensor_winseqreg_1) / sizeof(struct reginfo_t), + .rk_sensor_init_data_size = sizeof(rk_init_data_sensor_reg_1) / sizeof(struct reginfo_t), + }, + #else + { + .rk_sensor_init_width = INVALID_VALUE, + .rk_sensor_init_height = INVALID_VALUE, + .rk_sensor_init_bus_param = INVALID_VALUE, + .rk_sensor_init_pixelcode = INVALID_VALUE, + .rk_sensor_init_data = NULL, + .rk_sensor_init_winseq = NULL, + .rk_sensor_winseq_size = 0, + .rk_sensor_init_data_size = 0, + }, + #endif + #if CONFIG_SENSOR_IIC_ADDR_01 + { + .rk_sensor_init_width = INVALID_VALUE, + .rk_sensor_init_height = INVALID_VALUE, + .rk_sensor_init_bus_param = INVALID_VALUE, + .rk_sensor_init_pixelcode = INVALID_VALUE, + .rk_sensor_init_data = rk_init_data_sensor_reg_01, + .rk_sensor_init_winseq = rk_init_data_sensor_winseqreg_01, + .rk_sensor_winseq_size = sizeof(rk_init_data_sensor_winseqreg_01) / sizeof(struct reginfo_t), + .rk_sensor_init_data_size = sizeof(rk_init_data_sensor_reg_01) / sizeof(struct reginfo_t), + }, + #else + { + .rk_sensor_init_width = INVALID_VALUE, + .rk_sensor_init_height = INVALID_VALUE, + .rk_sensor_init_bus_param = INVALID_VALUE, + .rk_sensor_init_pixelcode = INVALID_VALUE, + .rk_sensor_init_data = NULL, + .rk_sensor_init_winseq = NULL, + .rk_sensor_winseq_size = 0, + .rk_sensor_init_data_size = 0, + }, + #endif + #if CONFIG_SENSOR_IIC_ADDR_02 + { + .rk_sensor_init_width = INVALID_VALUE, + .rk_sensor_init_height = INVALID_VALUE, + .rk_sensor_init_bus_param = INVALID_VALUE, + .rk_sensor_init_pixelcode = INVALID_VALUE, + .rk_sensor_init_data = rk_init_data_sensor_reg_02, + .rk_sensor_init_winseq = rk_init_data_sensor_winseqreg_02, + .rk_sensor_winseq_size = sizeof(rk_init_data_sensor_winseqreg_02) / sizeof(struct reginfo_t), + .rk_sensor_init_data_size = sizeof(rk_init_data_sensor_reg_02) / sizeof(struct reginfo_t), + }, + #else + { + .rk_sensor_init_width = INVALID_VALUE, + .rk_sensor_init_height = INVALID_VALUE, + .rk_sensor_init_bus_param = INVALID_VALUE, + .rk_sensor_init_pixelcode = INVALID_VALUE, + .rk_sensor_init_data = NULL, + .rk_sensor_init_winseq = NULL, + .rk_sensor_winseq_size = 0, + .rk_sensor_init_data_size = 0, + }, + #endif + #if CONFIG_SENSOR_IIC_ADDR_11 + { + .rk_sensor_init_width = INVALID_VALUE, + .rk_sensor_init_height = INVALID_VALUE, + .rk_sensor_init_bus_param = INVALID_VALUE, + .rk_sensor_init_pixelcode = INVALID_VALUE, + .rk_sensor_init_data = rk_init_data_sensor_reg_11, + .rk_sensor_init_winseq = rk_init_data_sensor_winseqreg_11, + .rk_sensor_winseq_size = sizeof(rk_init_data_sensor_winseqreg_11) / sizeof(struct reginfo_t), + .rk_sensor_init_data_size = sizeof(rk_init_data_sensor_reg_11) / sizeof(struct reginfo_t), + }, + #else + { + .rk_sensor_init_width = INVALID_VALUE, + .rk_sensor_init_height = INVALID_VALUE, + .rk_sensor_init_bus_param = INVALID_VALUE, + .rk_sensor_init_pixelcode = INVALID_VALUE, + .rk_sensor_init_data = NULL, + .rk_sensor_init_winseq = NULL, + .rk_sensor_winseq_size = 0, + .rk_sensor_init_data_size = 0, + }, + #endif + #if CONFIG_SENSOR_IIC_ADDR_12 + { + .rk_sensor_init_width = INVALID_VALUE, + .rk_sensor_init_height = INVALID_VALUE, + .rk_sensor_init_bus_param = INVALID_VALUE, + .rk_sensor_init_pixelcode = INVALID_VALUE, + .rk_sensor_init_data = rk_init_data_sensor_reg_12, + .rk_sensor_init_winseq = rk_init_data_sensor_winseqreg_12, + .rk_sensor_winseq_size = sizeof(rk_init_data_sensor_winseqreg_12) / sizeof(struct reginfo_t), + .rk_sensor_init_data_size = sizeof(rk_init_data_sensor_reg_12) / sizeof(struct reginfo_t), + }, + #else + { + .rk_sensor_init_width = INVALID_VALUE, + .rk_sensor_init_height = INVALID_VALUE, + .rk_sensor_init_bus_param = INVALID_VALUE, + .rk_sensor_init_pixelcode = INVALID_VALUE, + .rk_sensor_init_data = NULL, + .rk_sensor_init_winseq = NULL, + .rk_sensor_winseq_size = 0, + .rk_sensor_init_data_size = 0, + }, + #endif + + }; +#include "../../../drivers/media/video/rk2928_camera.c" + +#endif /* CONFIG_VIDEO_RK29 */ diff --git a/arch/arm/mach-rk2928/board-rk2928-tb.c b/arch/arm/mach-rk2928/board-rk2928-tb.c index 7c592250152f..51ae93133d71 100755 --- a/arch/arm/mach-rk2928/board-rk2928-tb.c +++ b/arch/arm/mach-rk2928/board-rk2928-tb.c @@ -64,8 +64,8 @@ #define RK30_FB0_MEM_SIZE 8*SZ_1M #endif -#include "board-rk2928-sdk-camera.c" -#include "board-rk2928-sdk-key.c" +#include "board-rk2928-tb-camera.c" +#include "board-rk2928-tb-key.c" #if defined (CONFIG_EETI_EGALAX) #define TOUCH_RESET_PIN RK2928_PIN3_PC3 diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 58ef75385191..5e02303f19e1 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -969,6 +969,10 @@ config LAIBAO_TS config TOUCHSCREEN_GT801_IIC tristate "GT801_IIC based touchscreens" depends on I2C2_RK29 + +config TOUCHSCREEN_GT811_IIC + tristate "GT811_IIC based touchscreens" + depends on I2C2_RK29 || I2C2_RK30 config TOUCHSCREEN_GT82X_IIC tristate "GT82x_IIC based touchscreens" diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 159f846c813a..b624bdc544a1 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -75,6 +75,7 @@ obj-$(CONFIG_EETI_EGALAX) += eeti_egalax_i2c.o obj-$(CONFIG_ATMEL_MXT224) += atmel_maxtouch.o obj-$(CONFIG_ATMEL_MXT1386) += atmel_mxt1386.o obj-$(CONFIG_TOUCHSCREEN_GT801_IIC) += gt801_ts.o +obj-$(CONFIG_TOUCHSCREEN_GT811_IIC) += gt811_ts.o obj-$(CONFIG_TOUCHSCREEN_GT82X_IIC) += goodix_touch_82x.o obj-$(CONFIG_TOUCHSCREEN_GT818_IIC) += gt818_ts.o obj-$(CONFIG_TOUCHSCREEN_GT8110) += gt8110_ts.o diff --git a/drivers/input/touchscreen/gt811_firmware.h b/drivers/input/touchscreen/gt811_firmware.h new file mode 100755 index 000000000000..a19bac40959d --- /dev/null +++ b/drivers/input/touchscreen/gt811_firmware.h @@ -0,0 +1,274 @@ +/* drivers/input/touchscreen/gt811_update.h + * + * Copyright (C) 2010 - 2011 Goodix, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + *Any problem,please contact andrew@goodix.com,+86 755-33338828 + * + */ + +#ifndef _LINUX_GT811_UPDATE_H +#define _LINUX_GT811_UPDATE_H +static unsigned char goodix_gt811_firmware[] = { + 0x11, + 0x10,0x10, + 0x45, + 0x00,0x00,0x00, + 0x41,0x00, + 0x0e,0xf0, + 0x06,0x24,0xad, + 0x00,0x00,0x00,0x00,0x00,0x00, + /*'G','O','O','D','I','X',*/ + + 0x4f,0xce,0x01,0x00,0x20,0x03,0xa7,0x00,0x08,0x8c,0x05,0xdf, + 0x26,0xf8,0x8e,0x05,0xdf,0xbd,0x41,0x16,0x20,0xfe,0x0e,0xbd,0xc2,0xd4,0xbd,0x4d, + 0x8c,0xbd,0x4d,0xc2,0xbd,0x41,0xb0,0xbd,0x47,0x61,0xbd,0x46,0x59,0xbd,0xf7,0x38, + 0x20,0x10,0x01,0x01,0x01,0x01,0x13,0xe6,0x01,0x08,0xd6,0xeb,0x26,0x04,0x01,0xcf, + 0x01,0x01,0xd6,0xeb,0x27,0xec,0xd6,0xe7,0x5c,0x26,0xe7,0xd7,0xeb,0xbd,0x46,0xf4, + 0xbd,0xc4,0x73,0xf6,0x07,0x0b,0x27,0x0f,0xbd,0x46,0xf8,0xbd,0x46,0x59,0xc6,0x80, + 0xd7,0xea,0xbd,0xf7,0x38,0x20,0xdb,0xbd,0xd4,0xb8,0xd6,0xea,0x5a,0x27,0x08,0xbd, + 0xf5,0x3c,0xbd,0xf7,0x38,0x20,0xcb,0x8d,0x64,0xbd,0x4c,0x90,0xbd,0xe9,0xd4,0xbd, + 0x4b,0xd7,0xbd,0x49,0x4c,0xbd,0xeb,0xe8,0xbd,0xf7,0x38,0xbd,0x42,0xa9,0xbd,0x47, + 0x87,0xbd,0x48,0xde,0xbd,0xd7,0xa2,0xbd,0x4b,0x41,0xbd,0xdb,0x6a,0xbd,0xef,0x1c, + 0xbd,0xdf,0x8d,0xbd,0xe3,0x51,0xbd,0xe3,0x71,0xbd,0xd5,0xa8,0xbd,0x4e,0x29,0xbd, + 0xef,0x95,0x20,0x8e,0x3c,0x34,0x30,0xbd,0xc7,0x1c,0xc6,0x5d,0x18,0xce,0x14,0x01, + 0x18,0xe7,0x00,0xbd,0x46,0x27,0xf7,0x07,0x10,0x56,0x56,0x56,0xc4,0xc0,0xe7,0x00, + 0xf6,0x07,0x21,0xc4,0x3f,0xea,0x00,0xf7,0x07,0x21,0x31,0x38,0x39,0xd6,0xef,0x26, + 0x1a,0xc6,0x01,0xd7,0xef,0xfe,0x01,0x28,0x3c,0xcc,0x0b,0x00,0xfd,0x01,0x28,0xbd, + 0x48,0x38,0xdd,0xf2,0xfd,0x02,0xf7,0x38,0xff,0x01,0x28,0x39,0x3c,0xd6,0xf5,0x26, + 0x03,0x7e,0x42,0x86,0xd6,0xac,0x5a,0x26,0x6e,0xfc,0x02,0x89,0x83,0x0d,0x80,0xce, + 0x00,0x14,0x02,0x8f,0x37,0xce,0x0b,0xa0,0x18,0xfe,0x01,0x28,0x32,0x81,0x08,0x23, + 0x0a,0x80,0x08,0xc6,0xa0,0x3a,0x3a,0x18,0x3a,0x18,0x3a,0xc6,0x14,0x3d,0x3a,0x18, + 0x3a,0x5f,0xd7,0x69,0xec,0x00,0x18,0xa3,0x00,0x7d,0x00,0x69,0x26,0x06,0xfd,0x02, + 0xfc,0xfd,0x02,0xfe,0x1a,0xb3,0x02,0xfc,0x2f,0x03,0xfd,0x02,0xfc,0x1a,0xb3,0x02, + 0xfe,0x2c,0x03,0xfd,0x02,0xfe,0x08,0x08,0x18,0x08,0x18,0x08,0x7c,0x00,0x69,0xd6, + 0x69,0xd1,0xc2,0x25,0xcf,0xd6,0xca,0x4f,0xf3,0x02,0xfe,0xb3,0x02,0xfc,0x2d,0x07, + 0xf6,0x02,0xf1,0xcb,0x02,0x20,0x06,0xf6,0x02,0xf1,0x27,0x01,0x5a,0xf7,0x02,0xf1, + 0xc1,0xfa,0x25,0x06,0xbd,0x49,0x43,0x7f,0x00,0xf5,0x38,0x39,0x3c,0xce,0x07,0x12, + 0xc6,0xa0,0xe7,0x00,0x5f,0xce,0x07,0x1d,0xe7,0x00,0x08,0x8c,0x07,0x48,0x23,0xf8, + 0xce,0x02,0xc4,0xe7,0x00,0x08,0x8c,0x02,0xec,0x25,0xf8,0x38,0x39,0x7f,0x03,0x33, + 0xbd,0xc5,0x25,0x13,0xe6,0x04,0x02,0x8d,0x49,0xbd,0x44,0x46,0xcc,0x01,0xc2,0xd0, + 0xda,0x82,0x00,0xd0,0xda,0x82,0x00,0xf3,0x02,0x90,0xfd,0x02,0x90,0x39,0x3c,0x18, + 0x3c,0x86,0x14,0xf6,0x03,0x33,0x3d,0xc3,0x0d,0x80,0x18,0x8f,0xce,0x02,0x2c,0xd6, + 0xc2,0xd7,0x6a,0xec,0x00,0x13,0xe6,0x40,0x02,0x47,0x56,0x18,0xed,0x00,0xc6,0x02, + 0x3a,0x18,0x3a,0x7a,0x00,0x6a,0x26,0xeb,0x4f,0x97,0xd1,0x7c,0x03,0x33,0x18,0x38, + 0x38,0x39,0x3c,0x18,0x3c,0xce,0x03,0x34,0x4f,0xc6,0xa0,0xa7,0x00,0x08,0x5a,0x26, + 0xfa,0x96,0xc1,0xb7,0x02,0x6f,0x18,0xce,0x0d,0x80,0xce,0x03,0x34,0xd6,0xc2,0xf7, + 0x02,0x6e,0x18,0x3c,0x4f,0x5f,0x18,0xe3,0x00,0x18,0x08,0x18,0x08,0x7a,0x02,0x6e, + 0x26,0xf4,0xfd,0x03,0x31,0x18,0x38,0x3c,0x4f,0xd6,0xc2,0x8f,0xfc,0x03,0x31,0x2a, + 0x0c,0x40,0x50,0x82,0x00,0x02,0x8f,0x40,0x50,0x82,0x00,0x20,0x02,0x02,0x8f,0xfd, + 0x03,0x31,0x38,0x96,0xc2,0xb7,0x02,0x6e,0x18,0x3c,0x18,0xec,0x00,0xb3,0x03,0x31, + 0x18,0xed,0x00,0x2d,0x04,0x2e,0x0d,0x20,0x18,0x6c,0x01,0x1a,0xa3,0x06,0x2c,0x11, + 0xed,0x06,0x20,0x0d,0x6c,0x00,0x1a,0xa3,0x04,0x2f,0x02,0xed,0x04,0xe3,0x02,0xed, + 0x02,0x18,0x08,0x18,0x08,0x7a,0x02,0x6e,0x26,0xd0,0x18,0x38,0xc6,0x0a,0x3a,0x58, + 0x18,0x3a,0x7a,0x02,0x6f,0x26,0x86,0xce,0x03,0x34,0x96,0xc1,0xb7,0x02,0x6f,0x4a, + 0xb7,0x03,0x29,0xb7,0x03,0x2a,0x4f,0xd6,0xc9,0xc0,0x0a,0xa3,0x04,0xe3,0x06,0x2b, + 0x15,0xd6,0xc1,0xf0,0x02,0x6f,0xb6,0x03,0x29,0xb1,0x03,0x2a,0x27,0x05,0xf7,0x03, + 0x29,0x20,0x03,0xf7,0x03,0x2a,0xc6,0x0a,0x3a,0x7a,0x02,0x6f,0x26,0xd8,0x8d,0x11, + 0xf6,0x03,0x29,0xf7,0x03,0x2a,0x8d,0x09,0xbd,0x45,0xff,0x8d,0x3a,0x18,0x38,0x38, + 0x39,0x7f,0x03,0x2c,0xf6,0x03,0x2a,0xf7,0x02,0x6f,0xd6,0xc2,0xd7,0x68,0xbd,0x45, + 0x1a,0xbd,0x45,0xc2,0x7c,0x02,0x6f,0xf6,0x02,0x6f,0xd1,0xc1,0x26,0xf0,0x7f,0x03, + 0x2c,0xf6,0x03,0x2a,0xf7,0x02,0x6f,0xd6,0xc2,0xd7,0x68,0xbd,0x45,0x1a,0xbd,0x45, + 0xc2,0x7a,0x02,0x6f,0x2a,0xf5,0x39,0x18,0xce,0x03,0x34,0xce,0x0d,0x80,0x96,0xc1, + 0xb7,0x02,0x6f,0x18,0x67,0x08,0x18,0x66,0x09,0x96,0xc2,0xb7,0x02,0x6e,0x3c,0xec, + 0x00,0x18,0xe3,0x08,0xed,0x00,0x08,0x08,0x7a,0x02,0x6e,0x26,0xf2,0x38,0xc6,0x0a, + 0x18,0x3a,0x58,0x3a,0x7a,0x02,0x6f,0x26,0xda,0x39,0x3c,0x4f,0x5f,0xb7,0x02,0x81, + 0xb7,0x02,0x80,0x97,0xe2,0x97,0xe1,0x97,0x68,0x97,0x67,0x18,0xce,0x0d,0x80,0xce, + 0x0d,0x80,0xff,0x02,0x89,0xff,0x02,0x87,0xd6,0xc1,0xd7,0x6a,0x3c,0x18,0x3c,0xd6, + 0xc2,0xd7,0x69,0x18,0xec,0x00,0x18,0x6f,0x00,0x18,0x6f,0x01,0x4d,0x2a,0x28,0x40, + 0x50,0x82,0x00,0x4d,0x27,0x02,0xc6,0xff,0xd1,0xc9,0x23,0x03,0x7c,0x00,0xe1,0xf1, + 0x02,0x7f,0x23,0x03,0x7c,0x02,0x80,0x4f,0xa7,0x00,0xf3,0x02,0x90,0xfd,0x02,0x90, + 0x86,0x02,0xb7,0x03,0x25,0x20,0x4d,0xd0,0xfb,0x82,0x00,0x2a,0x02,0x4f,0x5f,0x4d, + 0x27,0x02,0xc6,0xff,0xd1,0xc9,0x22,0x04,0x86,0x02,0x20,0x04,0x7c,0x00,0xe2,0x4f, + 0xb7,0x03,0x25,0xf1,0x02,0x7f,0x23,0x03,0x7c,0x02,0x81,0xe7,0x00,0x4f,0xf3,0x02, + 0x90,0xfd,0x02,0x90,0xe6,0x00,0xd1,0x68,0x23,0x11,0x96,0x68,0x97,0x67,0xd7,0x68, + 0xfc,0x02,0x89,0xfd,0x02,0x87,0xff,0x02,0x89,0x20,0x09,0xd1,0x67,0x23,0x05,0xd7, + 0x67,0xff,0x02,0x87,0x3c,0xc6,0xa0,0x3a,0x3a,0xf6,0x03,0x25,0xe7,0x00,0x38,0x08, + 0xc6,0x02,0x18,0x3a,0x7a,0x00,0x69,0x27,0x03,0x7e,0x44,0x6f,0x18,0x38,0x38,0xc6, + 0x14,0x3a,0x18,0x3a,0x7a,0x00,0x6a,0x27,0x03,0x7e,0x44,0x68,0x38,0x39,0xce,0x03, + 0x34,0xf6,0x02,0x6f,0x86,0x0a,0x3d,0x3a,0xec,0x00,0x3d,0x5d,0xfd,0x03,0x26,0x27, + 0x6e,0x86,0x01,0xf6,0x03,0x2c,0x27,0x10,0x5a,0x27,0x18,0x5a,0x27,0x26,0xf6,0x03, + 0x2b,0x27,0x05,0x5a,0x27,0x28,0x20,0x08,0xe6,0x00,0xe1,0x01,0x22,0x02,0x20,0x1e, + 0x4f,0x20,0x1b,0xf6,0x03,0x2b,0xc1,0x02,0x27,0x14,0xe6,0x00,0xd0,0x68,0xc1,0x04, + 0x2e,0xe6,0x20,0x1a,0x4f,0xf6,0x03,0x2b,0xc1,0x01,0x27,0x02,0x20,0x08,0xb7,0x03, + 0x28,0x4f,0xd6,0xc2,0x20,0x0e,0xb7,0x03,0x28,0x4f,0xe6,0x00,0x20,0x06,0xb7,0x03, + 0x28,0x4f,0xe6,0x01,0xfd,0x03,0x31,0xec,0x02,0x3c,0xfe,0x03,0x31,0x02,0x8f,0x38, + 0xfd,0x03,0x26,0x4f,0xf6,0x03,0x28,0x26,0x06,0xb3,0x03,0x26,0xfd,0x03,0x26,0xec, + 0x04,0xf3,0x03,0x26,0xfd,0x03,0x2f,0xec,0x06,0xf3,0x03,0x26,0xfd,0x03,0x2d,0xec, + 0x08,0xf3,0x03,0x26,0xed,0x08,0xfc,0x03,0x2d,0x47,0x56,0x47,0x56,0xe3,0x08,0xed, + 0x08,0xe6,0x00,0xd7,0x68,0x39,0xf6,0x03,0x2c,0xc1,0x03,0x2c,0x03,0xf7,0x03,0x2b, + 0x7f,0x03,0x2c,0x4f,0xd6,0xc9,0xc0,0x0a,0x1a,0xb3,0x03,0x2f,0x2c,0x03,0x7c,0x03, + 0x2c,0x40,0x50,0x82,0x00,0x1a,0xb3,0x03,0x2d,0x2f,0x06,0x7c,0x03,0x2c,0x7c,0x03, + 0x2c,0xf6,0x03,0x2c,0xc1,0x03,0x26,0x0a,0xf6,0x03,0x2b,0x26,0x05,0xc6,0x01,0xf7, + 0x03,0x2c,0x39,0x3c,0x18,0x3c,0xce,0x03,0x34,0x18,0xce,0x03,0x05,0xd6,0xc1,0x37, + 0xec,0x08,0x18,0xe3,0x00,0x47,0x56,0xed,0x08,0x18,0xed,0x00,0xc6,0x08,0x3a,0x18, + 0x08,0x18,0x08,0x33,0x5a,0x26,0xe8,0x18,0x38,0x38,0x39,0x3c,0xce,0x16,0x00,0x1d, + 0x00,0x02,0x1c,0x06,0x02,0x1d,0x07,0x02,0xbd,0xef,0x0d,0x1e,0x02,0x02,0x07,0x1d, + 0x06,0x02,0xc6,0x02,0x20,0x15,0x1d,0x06,0x02,0x1c,0x07,0x02,0xbd,0xef,0x0d,0x1f, + 0x02,0x02,0x07,0x1d,0x07,0x02,0xc6,0x01,0x20,0x01,0x5f,0x38,0x39,0x3c,0x34,0x30, + 0xbd,0xc8,0x97,0xd6,0x6a,0x4f,0xc3,0x07,0x92,0x18,0x8f,0xcc,0x42,0xca,0x18,0xed, + 0x01,0xbd,0x42,0x88,0x8d,0xb5,0xf7,0x07,0x10,0x56,0x56,0x56,0xc4,0xc0,0xe7,0x00, + 0xf6,0x07,0x21,0xc4,0x3f,0xea,0x00,0xf7,0x07,0x21,0x7f,0x02,0xc2,0xcc,0x80,0x00, + 0xfd,0x01,0x2e,0xf6,0x06,0xec,0xc4,0x0f,0xd7,0xfb,0x5f,0xd7,0xf5,0xd7,0xf4,0xf7, + 0x02,0xfb,0xd7,0xef,0xd7,0xc8,0xd7,0x6a,0x86,0x03,0x3d,0x4f,0xc3,0x03,0xd8,0xfd, + 0x03,0xd6,0xbd,0x4d,0x69,0xd6,0x6a,0x86,0x05,0x3d,0x4f,0xc3,0x03,0xe7,0x18,0x8f, + 0x18,0x6f,0x04,0x7c,0x00,0x6a,0xd6,0x6a,0xc1,0x05,0x25,0xdc,0xbd,0x48,0x20,0xd6, + 0xe6,0xc4,0x30,0xd7,0x68,0x26,0x0d,0xc6,0x0c,0xf7,0x02,0xed,0x5c,0xf7,0x02,0xee, + 0xc6,0x0f,0x20,0x09,0xc6,0x0c,0xf7,0x02,0xed,0x5c,0xf7,0x02,0xee,0xf7,0x02,0xef, + 0xc6,0x0a,0xf7,0x02,0xf0,0x31,0x38,0x39,0x7f,0x13,0x01,0x39,0xf6,0x07,0x21,0xc4, + 0xc0,0xca,0x20,0xf7,0x07,0x21,0xc6,0xf0,0xf7,0x07,0x22,0x5f,0xd7,0xfa,0x8d,0xe8, + 0xf6,0x07,0x0b,0x27,0x24,0x7f,0x07,0x0b,0xbd,0xf1,0x9e,0xf6,0x01,0x32,0x5a,0x26, + 0x18,0xf6,0x07,0x21,0xc4,0xc0,0xf7,0x07,0x21,0x7f,0x07,0x22,0xbd,0xf1,0x4e,0xfc, + 0x01,0x30,0xf7,0x07,0x0c,0xb7,0x07,0x0d,0x39,0x4f,0x5f,0xdd,0x75,0x8d,0xb9,0xbd, + 0xef,0x0d,0xf6,0x07,0x0b,0x26,0xce,0xdc,0x75,0xc3,0x00,0x01,0xdd,0x75,0x83,0x07, + 0xd0,0x25,0xea,0xd6,0xfa,0x26,0x05,0xbd,0xf7,0xd6,0x20,0x03,0xbd,0xf7,0xed,0xd6, + 0xfa,0xc8,0x01,0x20,0xa7,0x7f,0x07,0x11,0xc6,0x02,0xf7,0x06,0x92,0xbd,0xf3,0x11, + 0x39,0x39,0xd6,0xf5,0x26,0x0b,0x12,0xec,0x08,0x07,0xc6,0x01,0xd7,0xf5,0xbd,0x48, + 0xbc,0x7f,0x02,0xf1,0xbd,0xd2,0x22,0x7f,0x02,0x84,0x39,0xd6,0xcb,0xc5,0x80,0x26, + 0x01,0x39,0xbd,0x48,0x38,0x1a,0xb3,0x02,0xf7,0x24,0x03,0xfd,0x02,0xf7,0x37,0xf6, + 0x02,0xf9,0x33,0x26,0x03,0xfd,0x02,0xf3,0x1a,0xb3,0x02,0xf3,0x23,0x05,0xb3,0x02, + 0xf3,0x20,0x05,0xfc,0x02,0xf3,0x93,0xf0,0x1a,0x83,0x00,0xc8,0x25,0x03,0x8d,0x64, + 0x39,0xdc,0xf0,0xd3,0xed,0x24,0x03,0x7c,0x02,0xfa,0xdd,0xed,0xd6,0xac,0xc1,0x02, + 0x24,0x04,0x13,0xec,0x02,0x05,0xc6,0x01,0xf7,0x02,0xf2,0x7c,0x02,0xf9,0xf6,0x02, + 0xf9,0xc1,0x10,0x26,0x3e,0xc6,0x04,0xd7,0x6a,0xdc,0xed,0x74,0x02,0xfa,0x46,0x56, + 0x7a,0x00,0x6a,0x26,0xf6,0xfd,0x02,0xf5,0x93,0xf2,0x24,0x0c,0xdc,0xf2,0xb3,0x02, + 0xf5,0x83,0x01,0xf4,0x23,0x02,0x8d,0x2a,0xfc,0x02,0xf7,0x37,0x36,0xfc,0x02,0xf5, + 0xbd,0xf7,0xbb,0x31,0x31,0x83,0x00,0xc8,0x24,0x07,0xf6,0x02,0xf2,0x27,0x02,0x8d, + 0x11,0x8d,0x01,0x39,0x5f,0xf7,0x02,0xf9,0xf7,0x02,0xfa,0x4f,0xb7,0x02,0xf2,0xdd, + 0xed,0x39,0x7f,0x02,0x95,0x7f,0x02,0x94,0xbd,0x49,0x43,0x39,0x3c,0x18,0xfe,0x01, + 0x28,0xfe,0x01,0x28,0xc6,0x14,0x3a,0x4f,0x5f,0xdd,0xf0,0xd7,0xbe,0x20,0x66,0xd6, + 0xbe,0xc1,0x07,0x26,0x05,0xc6,0xa0,0x3a,0x20,0x08,0xc1,0x08,0x26,0x04,0xc6,0xa0, + 0x18,0x3a,0x5f,0xd7,0xbf,0x20,0x3f,0x3c,0x18,0x3c,0x3c,0x18,0x3c,0x3c,0xce,0x06, + 0xa2,0xd6,0xbf,0x3a,0xec,0x00,0x38,0x36,0x3a,0x18,0x3a,0xec,0x00,0x18,0xa3,0x00, + 0xdd,0xcf,0x33,0x18,0x38,0x38,0x3a,0x18,0x3a,0x18,0xec,0x00,0xa3,0x00,0xd3,0xcf, + 0x2a,0x05,0x43,0x53,0xc3,0x00,0x01,0xd3,0xf0,0x24,0x03,0xcc,0xff,0xff,0xdd,0xf0, + 0x18,0x38,0x38,0x7c,0x00,0xbf,0xd6,0xc2,0x5a,0xd1,0xbf,0x22,0xba,0xc6,0x14,0x3a, + 0x18,0x3a,0x7c,0x00,0xbe,0xd6,0xc0,0x5a,0xd1,0xbe,0x22,0x93,0xdc,0xf0,0x38,0x39, + 0x3c,0x18,0x3c,0xce,0x0b,0x00,0x18,0xce,0x0c,0x40,0xec,0x00,0xed,0xa0,0x18,0xec, + 0x00,0x18,0xed,0xa0,0xc6,0x02,0x3a,0x18,0x3a,0x8c,0x0b,0xa0,0x25,0xec,0x18,0x38, + 0x38,0x39,0x13,0xcb,0x80,0x2a,0xd6,0xe2,0xd1,0xe1,0x22,0x02,0xd6,0xe1,0x86,0x0a, + 0x3d,0xdd,0xf0,0xd6,0xda,0x86,0x07,0x3d,0x93,0xf0,0x24,0x05,0xbd,0x47,0x6e,0x20, + 0x0f,0xbd,0xce,0x22,0x13,0xec,0x08,0x05,0xbd,0x41,0xf8,0x20,0x03,0x5f,0xd7,0xf5, + 0x39,0x3c,0x3c,0x7e,0xce,0x98,0x3c,0x3c,0xbd,0xd0,0x9b,0x13,0xe6,0x02,0x06,0x7c, + 0x02,0x8c,0x7c,0x02,0x8b,0xfe,0x02,0x6c,0xe6,0x00,0xd1,0xca,0x25,0x16,0xf6,0x02, + 0x8b,0xc1,0x02,0x24,0x07,0xf6,0x02,0x8c,0xc1,0x02,0x25,0x08,0xc6,0x03,0xf7,0x02, + 0x8c,0xf7,0x02,0x8b,0x38,0x38,0x39,0xbd,0x48,0x38,0xdd,0xf2,0xbd,0xd1,0x6b,0x39, + 0xf6,0x07,0x11,0xf7,0x02,0x75,0xc1,0xc3,0x26,0x06,0x7f,0x07,0x11,0x7e,0xc0,0x00, + 0x15,0xe9,0xc0,0xf6,0x06,0x92,0x56,0x56,0x56,0xc4,0xc0,0xda,0xe9,0xd7,0xe9,0xf6, + 0x06,0x92,0xc5,0x03,0x26,0x05,0xca,0x02,0xf7,0x06,0x92,0xbd,0xec,0xc3,0xd6,0xb7, + 0x27,0x08,0xf6,0x02,0x16,0xca,0x20,0xf7,0x02,0x16,0x8d,0x0a,0xbd,0x4b,0x05,0xbd, + 0x4b,0x23,0xbd,0xe8,0xf5,0x39,0x3c,0x3c,0x34,0x30,0x6f,0x02,0xf6,0x01,0xb4,0x5a, + 0x27,0x03,0x7e,0x4a,0xbf,0xd6,0xb7,0xf7,0x07,0x22,0x5f,0xd7,0x6a,0x18,0xce,0x02, + 0xc4,0x58,0x58,0x58,0x18,0x3a,0x18,0xe6,0x00,0xd7,0x68,0x27,0x48,0x4f,0x05,0xc3, + 0x00,0xa0,0x37,0x36,0xd6,0x6a,0x58,0x58,0x58,0x4f,0xc3,0x02,0xc4,0x18,0x8f,0x18, + 0xa6,0x02,0x5f,0xed,0x00,0x18,0xe6,0x01,0x4f,0xe3,0x00,0x18,0x38,0x18,0xed,0x00, + 0xd6,0x68,0x4f,0x05,0xc3,0x00,0x96,0x37,0x36,0xd6,0x6a,0x58,0x58,0x58,0x4f,0xc3, + 0x02,0xc4,0x18,0x8f,0x18,0xa6,0x04,0x5f,0xed,0x00,0x18,0xe6,0x03,0x4f,0xe3,0x00, + 0x18,0x38,0x18,0xed,0x00,0x7c,0x00,0x6a,0xd6,0x6a,0xc1,0x05,0x25,0x9f,0x5f,0xd7, + 0x6a,0xc6,0x91,0xd7,0x68,0xbd,0x4a,0xc3,0xbd,0x4a,0xc3,0xbd,0x4a,0xc3,0xd6,0x6a, + 0x4f,0x05,0x18,0x8f,0x18,0xec,0xa2,0xdd,0x91,0x18,0xec,0x98,0xdd,0x8f,0xd6,0x91, + 0xf7,0x07,0x32,0xd6,0x92,0xf7,0x07,0x39,0xd6,0x8f,0xf7,0x07,0x3a,0xd6,0x90,0xf7, + 0x07,0x3b,0xd6,0x6a,0x4f,0x18,0x8f,0x18,0xe6,0x93,0xf7,0x07,0x3c,0xc6,0xab,0xd7, + 0x68,0x7c,0x00,0x6a,0x8d,0x71,0x5f,0xd7,0x68,0xd7,0x6a,0x74,0x00,0x68,0x4f,0x18, + 0x8f,0x18,0xe6,0x93,0x27,0x03,0x14,0x68,0x10,0x7c,0x00,0x6a,0xd6,0x6a,0xc1,0x05, + 0x25,0xe9,0xd6,0xb7,0x27,0x03,0x14,0x68,0x20,0xf6,0x07,0x21,0xc4,0xc0,0xda,0x68, + 0xf7,0x07,0x21,0xd6,0x68,0xd7,0x6a,0xc6,0x07,0xd7,0x68,0x13,0x6a,0x02,0x04,0xc6, + 0x0c,0xd7,0x68,0x13,0x6a,0x1c,0x04,0xc6,0x21,0xd7,0x68,0x5f,0xd7,0x6a,0x20,0x12, + 0x4f,0xc3,0x06,0x92,0x18,0x8f,0xe6,0x02,0x18,0xeb,0x8f,0xe7,0x02,0x7c,0x00,0x6a, + 0xd6,0x6a,0xd1,0x68,0x25,0xea,0xd6,0x68,0x4f,0xc3,0x06,0x92,0x18,0x8f,0xe6,0x02, + 0x18,0xe7,0x8f,0x31,0x38,0x38,0x39,0x3c,0x3c,0xd6,0x6a,0x4f,0x05,0x8f,0xec,0xa2, + 0xdd,0x91,0xec,0x98,0xdd,0x8f,0xce,0x06,0x92,0xd6,0x68,0x3a,0xd6,0x91,0xe7,0x00, + 0xd6,0x68,0x4f,0xc3,0x06,0x92,0x8f,0xd6,0x92,0xe7,0x01,0xd6,0x8f,0xe7,0x02,0xd6, + 0x90,0xe7,0x03,0x3c,0xd6,0x6a,0x4f,0x8f,0xe6,0x93,0x38,0xe7,0x04,0x7c,0x00,0x6a, + 0xd6,0x68,0xcb,0x05,0xd7,0x68,0x38,0x38,0x39,0x7f,0x01,0xb4,0xd6,0xc6,0xc5,0x3f, + 0x26,0x04,0x13,0xbd,0x3f,0x05,0xc6,0x01,0xf7,0x01,0xb4,0xf6,0x02,0x75,0x5a,0x26, + 0x05,0xc6,0x01,0xf7,0x01,0xb4,0x39,0xf6,0x01,0xb4,0x5a,0x26,0x17,0x13,0xe6,0x08, + 0x0a,0xbd,0xf7,0xed,0xbd,0xef,0x0d,0xbd,0xf7,0xd6,0x39,0xbd,0xf7,0xd6,0xbd,0xef, + 0x0d,0xbd,0xf7,0xed,0x39,0x3c,0x3c,0x5f,0xd7,0x6a,0x7e,0x4b,0xcd,0x4f,0x05,0x05, + 0xc3,0x00,0x29,0xfd,0x03,0xd4,0x8f,0xe6,0x00,0x5a,0x27,0x09,0xe6,0x01,0xd1,0xc2, + 0x26,0x31,0xfe,0x03,0xd4,0xe6,0x01,0xe1,0x00,0x26,0x0e,0xe6,0x00,0x5a,0x26,0x04, + 0x6c,0x01,0x20,0x05,0xfe,0x03,0xd4,0x6a,0x00,0xe6,0x03,0xe1,0x02,0x26,0x14,0xd1, + 0xc0,0x24,0x05,0x6c,0x03,0xfe,0x03,0xd4,0xe6,0x02,0xc1,0x01,0x23,0x05,0x6a,0x02, + 0xfe,0x03,0xd4,0xe6,0x02,0x5a,0x27,0x09,0xe6,0x03,0xd1,0xc0,0x26,0x2e,0xfe,0x03, + 0xd4,0xe6,0x03,0xe1,0x02,0x26,0x0e,0xe6,0x02,0x5a,0x26,0x04,0x6c,0x03,0x20,0x05, + 0xfe,0x03,0xd4,0x6a,0x02,0xe6,0x01,0xe1,0x00,0x26,0x11,0xd1,0xc2,0x24,0x05,0x6c, + 0x01,0xfe,0x03,0xd4,0xe6,0x00,0xc1,0x01,0x23,0x02,0x6a,0x00,0x7c,0x00,0x6a,0xd6, + 0x6a,0xd1,0xc8,0x24,0x03,0x7e,0x4b,0x49,0x38,0x38,0x39,0x3c,0x3c,0x5f,0xd7,0x6a, + 0x7e,0x4c,0x86,0x4f,0x8f,0xe6,0x93,0x26,0x05,0xce,0x03,0x00,0x20,0x18,0xce,0x03, + 0x00,0xd6,0x6a,0x3a,0x6c,0x00,0xe6,0x00,0xc1,0x05,0x23,0x04,0xc6,0x05,0xe7,0x00, + 0x5a,0x26,0x0a,0xce,0x01,0x3e,0xd6,0x6a,0x3a,0x6f,0x00,0x20,0x38,0xe6,0x00,0xc1, + 0x02,0x26,0x32,0xd6,0x6a,0x58,0x58,0x4f,0xc3,0x01,0x5c,0x37,0x36,0xd6,0x6a,0x58, + 0x58,0x58,0x4f,0xc3,0x01,0xc2,0x8f,0xec,0x02,0x38,0xed,0x02,0xd6,0x6a,0x58,0x58, + 0x4f,0xc3,0x01,0x48,0x37,0x36,0xd6,0x6a,0x58,0x58,0x58,0x4f,0xc3,0x01,0xea,0x8f, + 0xec,0x02,0x38,0xed,0x02,0xce,0x01,0x39,0xd6,0x6a,0x3a,0xa6,0x00,0x27,0x36,0x4f, + 0x05,0x37,0x36,0xce,0x01,0x5c,0xd6,0x6a,0x58,0x58,0x3a,0xec,0x00,0x38,0xed,0xa2, + 0xd6,0x6a,0x4f,0x05,0x37,0x36,0xce,0x01,0x48,0xd6,0x6a,0x58,0x58,0x3a,0xec,0x00, + 0x38,0xed,0x98,0xd6,0x6a,0x4f,0x8f,0xc6,0x01,0xe7,0x93,0xce,0x01,0x43,0xd6,0x6a, + 0x3a,0xc6,0x1f,0xe7,0x00,0x7c,0x00,0x6a,0xd6,0x6a,0xd1,0xc5,0x24,0x03,0x7e,0x4b, + 0xdf,0x38,0x38,0x39,0x12,0xcb,0x20,0x03,0x7e,0x4d,0x68,0x5f,0xd7,0x6a,0x18,0xce, + 0x03,0xe7,0x7e,0x4d,0x61,0x4f,0x97,0x67,0x05,0x8f,0xec,0xa2,0xdd,0x91,0xec,0x98, + 0xdd,0x8f,0xd6,0x6a,0x86,0x03,0x3d,0xc3,0x03,0xd8,0xfd,0x03,0xd6,0x4f,0xd6,0x6a, + 0x8f,0xe6,0x93,0x26,0x09,0xbd,0x4d,0x69,0x18,0x6f,0x04,0x7e,0x4d,0x58,0x18,0x6d, + 0x04,0x26,0x0f,0x18,0xe7,0x04,0xdc,0x91,0x18,0xed,0x00,0xdc,0x8f,0x18,0xed,0x02, + 0x20,0x7a,0xfe,0x03,0xd6,0xe6,0x00,0xc1,0x01,0x26,0x0a,0xce,0x01,0x3e,0xd6,0x6a, + 0x3a,0x6f,0x00,0x20,0x67,0xdc,0x91,0x18,0xa3,0x00,0x2f,0x0a,0x05,0xb3,0x01,0x78, + 0x23,0x13,0x86,0x02,0x20,0x0d,0x43,0x53,0xc3,0x00,0x01,0x05,0xb3,0x01,0x78,0x23, + 0x04,0x86,0x01,0x97,0x67,0x96,0x67,0xfe,0x03,0xd6,0xe6,0x01,0x27,0x07,0x11,0x26, + 0x04,0xc6,0x01,0xe7,0x00,0xa7,0x01,0x7f,0x00,0x67,0xdc,0x8f,0x18,0xa3,0x02,0x2f, + 0x0a,0x05,0xb3,0x01,0x76,0x23,0x13,0x86,0x02,0x20,0x0d,0x43,0x53,0xc3,0x00,0x01, + 0x05,0xb3,0x01,0x76,0x23,0x04,0x86,0x01,0x97,0x67,0x96,0x67,0xfe,0x03,0xd6,0xe6, + 0x02,0x27,0x07,0x11,0x26,0x04,0xc6,0x01,0xe7,0x00,0xa7,0x02,0xc6,0x05,0x18,0x3a, + 0x7c,0x00,0x6a,0xd6,0x6a,0xd1,0xc5,0x24,0x03,0x7e,0x4c,0xa1,0x39,0x3c,0xfe,0x03, + 0xd6,0x6f,0x00,0x6f,0x01,0x6f,0x02,0x38,0x39,0xbd,0xd6,0x07,0xd6,0xb9,0x27,0x03, + 0x14,0xb9,0x80,0x39,0xd6,0x81,0x26,0x04,0xd6,0x68,0xd7,0x80,0xbd,0xd9,0x29,0x39, + 0xce,0x05,0xe0,0xcc,0x4d,0x80,0xed,0x68,0xcc,0x4d,0x75,0xed,0x5e,0xcc,0x49,0x12, + 0xed,0x48,0xcc,0x46,0xf8,0xed,0x06,0xcc,0x49,0x43,0xed,0x58,0xcc,0x47,0x6d,0xed, + 0x56,0xcc,0x47,0x6e,0xed,0x4e,0xcc,0x4d,0xd8,0xed,0x60,0xcc,0x49,0x0d,0xed,0x50, + 0xcc,0x4e,0x33,0xed,0x6e,0x39,0xbd,0xc4,0x92,0xce,0x06,0x92,0xcc,0x00,0x00,0xed, + 0x81,0xcc,0xe8,0x11,0xed,0x83,0xcc,0x10,0x10,0xed,0x85,0x39,0x3c,0x3c,0xd6,0xc8, + 0xd1,0xac,0x26,0x20,0xf6,0x02,0xfb,0xd1,0xac,0x27,0x08,0xd6,0xac,0xf7,0x02,0xfb, + 0x5f,0xd7,0xf4,0xd6,0xac,0x27,0x0b,0xd6,0xf4,0xc1,0xff,0x24,0x07,0x7c,0x00,0xf4, + 0x20,0x02,0xd7,0xf4,0xd6,0xc8,0x27,0x10,0xd6,0xac,0x27,0x0c,0xd6,0xc8,0xd1,0xac, + 0x27,0x06,0xd6,0xf4,0xc1,0x04,0x22,0x03,0x7e,0xf4,0x76,0xd6,0xad,0x27,0x04,0xd1, + 0xc8,0x27,0x07,0xd6,0xc8,0xd7,0xad,0x5f,0xd7,0xae,0x7e,0xf4,0xae,0xd6,0xac,0x37, + 0xbd,0xd6,0x93,0x33,0xd7,0xac,0x39,0xbd,0xf8,0xdb,0x10,0x4f,0x5f,0xfd,0x01,0x7e, + 0xd6,0x68,0x26,0x04,0xdc,0x7d,0x20,0x02,0xdc,0x7b,0xfd,0x01,0x80,0x86,0x09,0x27, + 0x0f,0x78,0x01,0xbc,0x79,0x01,0xbb,0x79,0x01,0xba,0x79,0x01,0xb9,0x4a,0x26,0xf1, + 0xdc,0x8d,0x6f,0x02,0x6f,0x03,0xed,0x0a,0xec,0x02,0xed,0x08,0xfc,0x01,0xb9,0xed, + 0x02,0xec,0x00,0xc3,0xff,0xf9,0x18,0x8f,0xfc,0x01,0xbb,0xbd,0xf9,0x9d,0x18,0xce, + 0x4f,0xb5,0xbd,0xfb,0xa9,0xdd,0x91,0x83,0x04,0x00,0x25,0x03,0x7e,0x4f,0x27,0xcc, + 0x04,0x00,0xed,0x0e,0x93,0x91,0xed,0x0c,0x83,0x01,0x00,0x22,0x1f,0xf6,0x02,0xf0, + 0x4f,0xed,0x0a,0xf6,0x02,0xed,0x18,0x8f,0xec,0x0c,0xbd,0xf9,0x08,0x3c,0xee,0x0a, + 0x02,0x8f,0x38,0xed,0x08,0xcc,0x04,0x00,0xa3,0x08,0x20,0x60,0xec,0x0c,0x83,0x02, + 0x00,0x22,0x2a,0xf6,0x02,0xf0,0x4f,0xed,0x0a,0xf6,0x02,0xee,0x18,0x8f,0xec,0x0c, + 0x83,0x01,0x00,0xbd,0xf9,0x08,0xed,0x08,0xb6,0x02,0xed,0x5f,0xe3,0x08,0x3c,0xee, + 0x0a,0x02,0x8f,0x38,0xed,0x06,0xcc,0x04,0x00,0xa3,0x06,0x20,0x2f,0xf6,0x02,0xf0, + 0x4f,0xed,0x0a,0xf6,0x02,0xef,0x18,0x8f,0xec,0x0c,0x83,0x02,0x00,0xbd,0xf9,0x08, + 0xed,0x08,0xb6,0x02,0xee,0x5f,0xed,0x06,0xb6,0x02,0xed,0xe3,0x06,0xe3,0x08,0x3c, + 0xee,0x0a,0x02,0x8f,0x38,0xed,0x04,0xcc,0x04,0x00,0xa3,0x04,0xdd,0x91,0xb3,0x01, + 0x80,0x22,0x03,0x7e,0x4f,0xb1,0x4f,0x5f,0x7e,0x4f,0xaf,0xfc,0x01,0x80,0x83,0x04, + 0x00,0x93,0x91,0x24,0xee,0xfc,0x01,0x80,0x83,0x04,0x00,0xed,0x0e,0xdc,0x91,0xa3, + 0x0e,0xed,0x0c,0x83,0x01,0x00,0x22,0x12,0xf6,0x02,0xf0,0x4f,0xed,0x0a,0xf6,0x02, + 0xed,0x18,0x8f,0xec,0x0c,0xbd,0xf9,0x08,0x20,0x44,0xec,0x0c,0x83,0x02,0x00,0x22, + 0x1b,0xf6,0x02,0xf0,0x4f,0xed,0x0a,0xf6,0x02,0xee,0x18,0x8f,0xec,0x0c,0x83,0x01, + 0x00,0xbd,0xf9,0x08,0xed,0x08,0xb6,0x02,0xed,0x5f,0x20,0x20,0xf6,0x02,0xf0,0x4f, + 0xed,0x0a,0xf6,0x02,0xef,0x18,0x8f,0xec,0x0c,0x83,0x02,0x00,0xbd,0xf9,0x08,0xed, + 0x08,0xb6,0x02,0xee,0x5f,0xed,0x06,0xb6,0x02,0xed,0xe3,0x06,0xe3,0x08,0x3c,0xee, + 0x0a,0x02,0x8f,0x38,0xe3,0x0e,0xdd,0x91,0xb3,0x01,0x80,0x25,0x08,0xfc,0x01,0x80, + 0x83,0x00,0x01,0xdd,0x91,0xae,0x00,0x38,0x39,0x00,0x00,0x01,0x00,0x00,0x00,0x00, + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x00,0x00,0x00,0x00, +}; + +#endif diff --git a/drivers/input/touchscreen/gt811_ts.c b/drivers/input/touchscreen/gt811_ts.c new file mode 100755 index 000000000000..c2cd505c1c15 --- /dev/null +++ b/drivers/input/touchscreen/gt811_ts.c @@ -0,0 +1,2017 @@ +/* drivers/input/touchscreen/gt811.c + * + * Copyright (C) 2010 - 2011 Goodix, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + *Any problem,please contact andrew@goodix.com,+86 755-33338828 + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +//#include +//#include +//#include +#include +#include +#include +#include +#include "gt811_ts.h" +#include "gt811_firmware.h" + +#include +#include +#include +#include +#include +#include +#include + +static struct workqueue_struct *goodix_wq; +static const char *s3c_ts_name = "gt811_ts"; +//static struct point_queue finger_list; +struct i2c_client * i2c_connect_client = NULL; +//EXPORT_SYMBOL(i2c_connect_client); +static struct proc_dir_entry *goodix_proc_entry; +static short goodix_read_version(struct gt811_ts_data *ts); +//static int tpd_button(struct gt811_ts_data *ts, unsigned int x, unsigned int y, unsigned int down); + +#ifdef CONFIG_HAS_EARLYSUSPEND +static void goodix_ts_early_suspend(struct early_suspend *h); +static void goodix_ts_late_resume(struct early_suspend *h); +int gt811_downloader( struct gt811_ts_data *ts, unsigned char * data); +#endif +//used by firmware update CRC +unsigned int oldcrc32 = 0xFFFFFFFF; +unsigned int crc32_table[256]; +unsigned int ulPolynomial = 0x04c11db7; + +unsigned int raw_data_ready = RAW_DATA_NON_ACTIVE; + +//#define DEBUG +#ifdef DEBUG +int sum = 0; +int access_count = 0; +int int_count = 0; +#endif +#define HAVE_TOUCH_KEY + //#define READ_KEY_VALUE + //#define READ_KEY_COOR + +#ifdef HAVE_TOUCH_KEY + const uint16_t touch_key_array[]={ + KEY_MENU, //MENU + KEY_HOMEPAGE, + KEY_BACK, + KEY_SEARCH + }; +#define MAX_KEY_NUM (sizeof(touch_key_array)/sizeof(touch_key_array[0])) +#endif + +/******************************************************* +Function: + Read data from the slave + Each read operation with two i2c_msg composition, for the first message sent from the machine address, + Article 2 reads the address used to send and retrieve data; each message sent before the start signal +Parameters: + client: i2c devices, including device address + buf [0]: The first byte to read Address + buf [1] ~ buf [len]: data buffer + len: the length of read data +return: + Execution messages +*********************************************************/ +/*Function as i2c_master_send */ +static int i2c_read_bytes(struct i2c_client *client, uint8_t *buf, int len) +{ + struct i2c_msg msgs[2]; + int ret=-1; + + msgs[0].flags=!I2C_M_RD; + msgs[0].addr=client->addr; + msgs[0].len=2; + msgs[0].buf=&buf[0]; + msgs[0].scl_rate=200000; + + msgs[1].flags=I2C_M_RD; + msgs[1].addr=client->addr; + msgs[1].len=len-2; + msgs[1].buf=&buf[2]; + msgs[1].scl_rate=200000; + + ret=i2c_transfer(client->adapter,msgs, 2); + return ret; +} + +/******************************************************* +Function: + Write data to a slave +Parameters: + client: i2c devices, including device address + buf [0]: The first byte of the write address + buf [1] ~ buf [len]: data buffer + len: data length +return: + Execution messages +*******************************************************/ +/*Function as i2c_master_send */ +static int i2c_write_bytes(struct i2c_client *client,uint8_t *data,int len) +{ + struct i2c_msg msg; + int ret=-1; + //发送设备地址 + msg.flags=!I2C_M_RD;//写消æ? msg.addr=client->addr; + msg.len=len; + msg.buf=data; + msg.scl_rate=200000; + msg.addr=client->addr; + + ret=i2c_transfer(client->adapter,&msg, 1); + return ret; +} + +/******************************************************* +Function: + Send a prefix command + +Parameters: + ts: client private data structure + +return: + Results of the implementation code, 0 for normal execution +*******************************************************/ +static int i2c_pre_cmd(struct gt811_ts_data *ts) +{ + int ret; + uint8_t pre_cmd_data[2]={0}; + pre_cmd_data[0]=0x0f; + pre_cmd_data[1]=0xff; + ret=i2c_write_bytes(ts->client,pre_cmd_data,2); + //msleep(2); + return ret; +} + +/******************************************************* +Function: + Send a suffix command + +Parameters: + ts: client private data structure + +return: + Results of the implementation code, 0 for normal execution +*******************************************************/ +static int i2c_end_cmd(struct gt811_ts_data *ts) +{ + int ret; + uint8_t end_cmd_data[2]={0}; + end_cmd_data[0]=0x80; + end_cmd_data[1]=0x00; + ret=i2c_write_bytes(ts->client,end_cmd_data,2); + //msleep(2); + return ret; +} + +/******************************************************************** + +*********************************************************************/ +#ifdef COOR_TO_KEY +static int list_key(s32 x_value, s32 y_value, u8* key) +{ + s32 i; + +#ifdef AREA_Y + if (y_value <= AREA_Y) +#else + if (x_value <= AREA_X) +#endif + { + return 0; + } + + for (i = 0; i < MAX_KEY_NUM; i++) + { + if (abs(key_center[i][x] - x_value) < KEY_X + && abs(key_center[i][y] - y_value) < KEY_Y) + { + (*key) |= (0x01<> 8; + config_info[61] = TOUCH_MAX_WIDTH & 0xff; + config_info[64] = TOUCH_MAX_HEIGHT >> 8; + config_info[63] = TOUCH_MAX_HEIGHT & 0xff; + + ret = i2c_write_bytes(ts->client, config_info, sizeof(config_info)/sizeof(config_info[0])); + if(ret < 0) + { + dev_info(&ts->client->dev, "GT811 Send config failed!\n"); + return ret; + } + ts->abs_y_max = (config_info[62]<<8) + config_info[61]; + ts->abs_x_max = (config_info[64]<<8) + config_info[63]; + ts->max_touch_num = config_info[60]; + ts->int_trigger_type = ((config_info[57]>>3)&0x01); + dev_info(&ts->client->dev, "GT811 init info:X_MAX=%d,Y_MAX=%d,TRIG_MODE=%s\n", + ts->abs_x_max, ts->abs_y_max, ts->int_trigger_type?"RISING EDGE":"FALLING EDGE"); + + return 0; +} + +/******************************************************* +FUNCTION: + Read gt811 IC Version +Argument: + ts: client +return: + 0:success + -1:error +*******************************************************/ +static short goodix_read_version(struct gt811_ts_data *ts) +{ + short ret; + uint8_t version_data[5]={0x07,0x17,0,0}; //store touchscreen version infomation + uint8_t version_data2[5]={0x07,0x17,0,0}; //store touchscreen version infomation + + char i = 0; + char cpf = 0; + memset(version_data, 0, 5); + version_data[0]=0x07; + version_data[1]=0x17; + + ret=i2c_read_bytes(ts->client, version_data, 4); + if (ret < 0) + return ret; + + for(i = 0;i < 10;i++) + { + i2c_read_bytes(ts->client, version_data2, 4); + if((version_data[2] !=version_data2[2])||(version_data[3] != version_data2[3])) + { + version_data[2] = version_data2[2]; + version_data[3] = version_data2[3]; + msleep(5); + break; + } + msleep(5); + cpf++; + } + + if(cpf == 10) + { + ts->version = (version_data[2]<<8)+version_data[3]; + dev_info(&ts->client->dev, "GT811 Verion:0x%04x\n", ts->version); + ret = 0; + } + else + { + dev_info(&ts->client->dev," Guitar Version Read Error: %d.%d\n",version_data[3],version_data[2]); + ts->version = 0xffff; + ret = -1; + } + + return ret; + +} +/******************start add by kuuga*******************/ +static void gt811_irq_enable(struct gt811_ts_data *ts) +{ + unsigned long irqflags; + spin_lock_irqsave(&ts->irq_lock, irqflags); + if (ts->irq_is_disable) + { + enable_irq(ts->irq); + ts->irq_is_disable = 0; + } + spin_unlock_irqrestore(&ts->irq_lock, irqflags); +} + +static void gt811_irq_disable(struct gt811_ts_data *ts) +{ + unsigned long irqflags; + spin_lock_irqsave(&ts->irq_lock, irqflags); + if (!ts->irq_is_disable) + { + disable_irq_nosync(ts->irq); + ts->irq_is_disable = 1; + } + spin_unlock_irqrestore(&ts->irq_lock, irqflags); +} + +/*****************end add by kuuga****************/ + +/******************************************************* +Function: + Touch-screen work function + Triggered by the interruption, to accept a set of coordinate data, + and then analyze the output parity +Parameters: + ts: client private data structure +return: + Results of the implementation code, 0 for normal execution +********************************************************/ +static void goodix_ts_work_func(struct work_struct *work) +{ + uint8_t point_data[READ_BYTES_NUM] = {READ_TOUCH_ADDR_H,READ_TOUCH_ADDR_L,0};//point_data[8*MAX_FINGER_NUM+2]={ 0 }; + uint8_t check_sum = 0; + uint8_t read_position = 0; + uint8_t track_id[MAX_FINGER_NUM]; + uint8_t point_index = 0; + uint8_t point_tmp = 0; + uint8_t point_count = 0; + uint16_t input_x = 0; + uint16_t input_y = 0; + uint8_t input_w = 0; + static uint8_t last_key = 0; + uint8_t finger = 0; + uint8_t key = 0; + unsigned int count = 0; + unsigned int position = 0; + int ret=-1; + int tmp = 0; + + struct gt811_ts_data *ts = container_of(work, struct gt811_ts_data, work); +#ifdef DEBUG + printk("int count :%d\n", ++int_count); + printk("ready?:%d\n", raw_data_ready); +#endif + if (RAW_DATA_ACTIVE == raw_data_ready) + { + raw_data_ready = RAW_DATA_READY; +#ifdef DEBUG + printk("ready!\n"); +#endif + } + +#ifndef INT_PORT +COORDINATE_POLL: +#endif + if( tmp > 9) + { + dev_info(&(ts->client->dev), "Because of transfer error,touchscreen stop working.\n"); + goto XFER_ERROR ; + } + + ret=i2c_read_bytes(ts->client, point_data, sizeof(point_data)/sizeof(point_data[0])); + if(ret <= 0) + { + dev_err(&(ts->client->dev),"I2C transfer error. Number:%d\n ", ret); + ts->bad_data = 1; + tmp ++; + ts->retry++; +#ifndef INT_PORT + goto COORDINATE_POLL; +#else + goto XFER_ERROR; +#endif + } +#if 0 + for(count=0;count<(sizeof(point_data)/sizeof(point_data[0])); count++) + { + printk("[%2d]:0x%2x", count, point_data[count]); + if((count+1)%10==0)printk("\n"); + } + printk("\n"); +#endif + if(point_data[2]&0x20) + { + if(point_data[3]==0xF0) + { + gpio_direction_output(SHUTDOWN_PORT, 0); + msleep(1); + // gpio_direction_input(SHUTDOWN_PORT); + gpio_set_value(SHUTDOWN_PORT,0); + msleep(100); + gpio_set_value(SHUTDOWN_PORT,1); + msleep(100); + + goodix_init_panel(ts); + goto WORK_FUNC_END; + } + } + switch(point_data[2]& 0x1f) + { + case 0: + case 1: + for(count=2; count<9; count++) + check_sum += (int)point_data[count]; + read_position = 9; + break; + case 2: + case 3: + for(count=2; count<14;count++) + check_sum += (int)point_data[count]; + read_position = 14; + break; + default: //touch finger larger than 3 + for(count=2; count<35;count++) + check_sum += (int)point_data[count]; + read_position = 35; + } + if(check_sum != point_data[read_position]) + { + dev_info(&ts->client->dev, "coor chksum error!\n"); + goto XFER_ERROR; + } + + point_index = point_data[2]&0x1f; + point_tmp = point_index; + for(position=0; (position>= 1; + } + finger = point_count; + if(finger) + { + for(count=0; count ts->abs_x_max)||(TOUCH_MAX_WIDTH-input_x > ts->abs_y_max))continue; + input_mt_slot(ts->input_dev, track_id[count]); + //input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER, false); + input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER, true); + //printk("DOWN\n") +; ; + input_report_abs(ts->input_dev, ABS_MT_POSITION_X, input_y); + input_report_abs(ts->input_dev, ABS_MT_POSITION_Y, input_x); + input_report_abs(ts->input_dev, ABS_MT_TOUCH_MAJOR, input_w); + //input_report_abs(ts->input_dev, ABS_MT_WIDTH_MAJOR, input_w); + //input_report_abs(ts->input_dev, ABS_MT_TRACKING_ID, track_id[count]); + //input_mt_sync(ts->input_dev); + } + } + else + { + for(tmp=0; tmp< MAX_FINGER_NUM; tmp++) + { + //printk("tmp=%d\n", tmp); + input_mt_slot(ts->input_dev, tmp);//按序号上æŠ? //input_report_abs(ts->input_dev, ABS_MT_TOUCH_MAJOR, 0); + input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER, false); + } + //input_mt_sync(ts->input_dev); + } + + //input_report_key(ts->input_dev, BTN_TOUCH, finger > 0); + input_sync(ts->input_dev); + +#ifdef HAVE_TOUCH_KEY + key = point_data[3]&0x0F; + if((last_key != 0)||(key != 0)) + { + for(count = 0; count < MAX_KEY_NUM; count++) + { + //printk("####################input_report_key++++++++++++%d\n",key); + input_report_key(ts->input_dev, touch_key_array[count], !!(key&(0x01<use_irq) + gt811_irq_enable(ts); //KT ADD 1202 +#endif +} + +/******************************************************* +Function: + Response function timer + Triggered by a timer, scheduling the work function of the touch screen operation; after re-timing +Parameters: + timer: the timer function is associated +return: + Timer mode, HRTIMER_NORESTART that do not automatically restart +********************************************************/ +static enum hrtimer_restart goodix_ts_timer_func(struct hrtimer *timer) +{ + struct gt811_ts_data *ts = container_of(timer, struct gt811_ts_data, timer); + queue_work(goodix_wq, &ts->work); + hrtimer_start(&ts->timer, ktime_set(0, (POLL_TIME+6)*1000000), HRTIMER_MODE_REL); + return HRTIMER_NORESTART; +} + +/******************************************************* +Function: + Interrupt response function + Triggered by an interrupt, the scheduler runs the touch screen handler +********************************************************/ +static irqreturn_t goodix_ts_irq_handler(int irq, void *dev_id) +{ + struct gt811_ts_data *ts = dev_id; + +#ifndef STOP_IRQ_TYPE + gt811_irq_disable(ts); //KT ADD 1202 +#endif + //disable_irq_nosync(ts->client->irq); + queue_work(goodix_wq, &ts->work); + + return IRQ_HANDLED; +} + +/******************************************************* +Function: + Power management gt811, gt811 allowed to sleep or to wake up +Parameters: + on: 0 that enable sleep, wake up 1 +return: + Is set successfully, 0 for success + Error code: -1 for the i2c error, -2 for the GPIO error;-EINVAL on error as a parameter +********************************************************/ +static int goodix_ts_power(struct gt811_ts_data * ts, int on) +{ + int ret = -1; + + unsigned char i2c_control_buf[3] = {0x06,0x92,0x01}; //suspend cmd + +#ifdef INT_PORT + if(ts != NULL && !ts->use_irq) + return -2; +#endif + switch(on) + { + case 0: + ret = i2c_write_bytes(ts->client, i2c_control_buf, 3); + printk("ret++++++++++++++++= %d=\n",ret); + dev_info(&ts->client->dev, "Send suspend cmd\n"); + if(ret < 0) //failed + ret = 0; + return ret; + + case 1: + gpio_direction_output(SHUTDOWN_PORT,0); + msleep(1); + gpio_set_value(SHUTDOWN_PORT,0); + msleep(100); + gpio_set_value(SHUTDOWN_PORT,1); + msleep(100); + ret = 0; + return ret; + + default: + dev_info(&ts->client->dev, "%s: Cant't support this command.", s3c_ts_name); + return -EINVAL; + } + +} +/******************************************************* +Function: + Touch-screen detection function + Called when the registration drive (required for a corresponding client); + For IO, interrupts and other resources to apply; equipment registration; touch screen initialization, etc. +Parameters: + client: the device structure to be driven + id: device ID +return: + Results of the implementation code, 0 for normal execution +********************************************************/ +static int goodix_ts_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + int ret = 0; + int retry=0; + char test_data = 1; + char buf[2]={0}; //w++ + unsigned char read_data[2] = {0,0 }; + const char irq_table[2] = {IRQF_TRIGGER_FALLING,IRQF_TRIGGER_RISING}; + struct gt811_ts_data *ts; + // struct gt811_platform_data *811data = client->dev.platform_data; + struct gt811_platform_data *pdata; + dev_info(&client->dev,"Install gt811 driver.\n"); + dev_info(&client->dev,"Driver Release Date:2012-02-08\n"); + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) + { + dev_err(&client->dev, "Must have I2C_FUNC_I2C.\n"); + ret = -ENODEV; + goto err_check_functionality_failed; + } +#if 0 + ret=i2c_read_bytes(client, read_data, sizeof(read_data)/sizeof(read_data[0])); + if(ret <= 0) + { + dev_err(&client->dev, "Must have GT811.\n"); + goto err_check_functionality_failed; + } +#endif + + ts = kzalloc(sizeof(*ts), GFP_KERNEL); + if (ts == NULL) { + ret = -ENOMEM; + goto err_alloc_data_failed; + } + + i2c_connect_client = client; + + gpio_free(SHUTDOWN_PORT); + ret = gpio_request(SHUTDOWN_PORT, "RESET_INT"); + if (ret < 0) + { + dev_err(&client->dev, "Failed to request RESET GPIO:%d, ERRNO:%d\n",(int)SHUTDOWN_PORT,ret); + goto err_gpio_request; + } + + rk29_mux_api_set(GPIO0D3_PWM_1_NAME,GPIO0D_GPIO0D3); + gpio_pull_updown(SHUTDOWN_PORT, 1); //set GPIO pull-up + + for(retry=0;retry <= 10; retry++) + { + gpio_direction_output(SHUTDOWN_PORT,0); + msleep(1); + // gpio_direction_input(SHUTDOWN_PORT);//setinput means not ack so set the reset high + // msleep(100); + gpio_set_value(SHUTDOWN_PORT,1); + msleep(100); + gpio_set_value(SHUTDOWN_PORT,0); + msleep(100); + gpio_set_value(SHUTDOWN_PORT,1); + msleep(100); + int val_ret = 1; + val_ret = gpio_get_value(SHUTDOWN_PORT); + ret = i2c_write_bytes(client, &test_data, 1); + //ret =i2c_master_reg8_recv(client, 0x00, buf, 2, 200*1000);//i2c_write_bytes(client, &test_data, 1); //Test I2C connection. + if (ret == 1) + break; + dev_info(&client->dev, "GT811 I2C TEST FAILED!Please check the HARDWARE connect\n"); + } + + if(ret <= 0) + { + dev_err(&client->dev, "Warnning: I2C communication might be ERROR!\n"); + goto err_i2c_failed; + } + + INIT_WORK(&ts->work, goodix_ts_work_func); //init work_struct + ts->client = client; + i2c_set_clientdata(client, ts); + pdata = client->dev.platform_data; +/////////////////////////////// UPDATE STEP 1 START///////////////////////////////////////////////////////////////// +#ifdef AUTO_UPDATE_GT811 //modify by andrew + msleep(20); + goodix_read_version(ts); + + ret = gt811_downloader( ts, goodix_gt811_firmware); + if(ret < 0) + { + dev_err(&client->dev, "Warnning: gt811 update might be ERROR!\n"); + //goto err_input_dev_alloc_failed; + } +#endif +///////////////////////////////UPDATE STEP 1 END//////////////////////////////////////////////////////////////// +#ifdef INT_PORT + client->irq=TS_INT; //If not defined in client + if (client->irq) + { + gpio_free(INT_PORT); + ret = gpio_request(INT_PORT, "TS_INT"); //Request IO + if (ret < 0) + { + dev_err(&client->dev, "Failed to request GPIO:%d, ERRNO:%d\n",(int)INT_PORT,ret); + goto err_gpio_request_failed; + } + + gpio_pull_updown(INT_PORT, NULL); //ret > 0 ? + + + #ifndef STOP_IRQ_TYPE + ts->irq = TS_INT; //KT ADD 1202 + ts->irq_is_disable = 0; // enable irq + #endif + } +#endif + +err_gpio_request_failed: + for(retry=0; retry<3; retry++) + { + ret=goodix_init_panel(ts); + msleep(2); + if(ret != 0) //Initiall failed + continue; + else + break; + } + if(ret != 0) + { + ts->bad_data=1; + goto err_init_godix_ts; + } + + ts->input_dev = input_allocate_device(); + if (ts->input_dev == NULL) + { + ret = -ENOMEM; + dev_dbg(&client->dev,"goodix_ts_probe: Failed to allocate input device\n"); + goto err_input_dev_alloc_failed; + } + + //ts->input_dev->evbit[0] = BIT_MASK(EV_SYN) | BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS) ; + //ts->input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + //////ts->input_dev->absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE); +#ifdef HAVE_TOUCH_KEY + for(retry = 0; retry < MAX_KEY_NUM; retry++) + { + input_set_capability(ts->input_dev,EV_KEY,touch_key_array[retry]); + } +#endif +/* + input_set_abs_params(ts->input_dev, ABS_X, 0, ts->abs_x_max, 0, 0); + input_set_abs_params(ts->input_dev, ABS_Y, 0, ts->abs_y_max, 0, 0); + input_set_abs_params(ts->input_dev, ABS_PRESSURE, 0, 255, 0, 0); +*/ +#ifdef GOODIX_MULTI_TOUCH + + __set_bit(INPUT_PROP_DIRECT, ts->input_dev->propbit); + __set_bit(EV_ABS, ts->input_dev->evbit); + + input_mt_init_slots(ts->input_dev, ts->max_touch_num); + input_set_abs_params(ts->input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0); + input_set_abs_params(ts->input_dev, ABS_MT_POSITION_X, 0, ts->abs_x_max, 0, 0); + input_set_abs_params(ts->input_dev, ABS_MT_POSITION_Y, 0, ts->abs_y_max, 0, 0); + + +#endif + + sprintf(ts->phys, "input/ts"); + ts->input_dev->name = s3c_ts_name; + ts->input_dev->phys = ts->phys; + ts->input_dev->id.bustype = BUS_I2C; + ts->input_dev->id.vendor = 0xDEAD; + ts->input_dev->id.product = 0xBEEF; + ts->input_dev->id.version = 10427; //screen firmware version + + ret = input_register_device(ts->input_dev); + if (ret) { + dev_err(&client->dev,"Probe: Unable to register %s input device\n", ts->input_dev->name); + goto err_input_register_device_failed; + } + ts->bad_data = 0; + +#ifdef INT_PORT + ret = request_irq(TS_INT, goodix_ts_irq_handler ,irq_table[ts->int_trigger_type], + client->name, ts); + if (ret != 0) + { + dev_err(&client->dev,"Cannot allocate ts INT!ERRNO:%d\n", ret); + gpio_direction_input(INT_PORT); + gpio_free(INT_PORT); + goto err_init_godix_ts; + } + else + { + #ifndef STOP_IRQ_TYPE + gt811_irq_disable(ts); //KT ADD 1202 + //#define + // disable_irq(client->irq); + #endif + ts->use_irq = 1; + dev_dbg(&client->dev,"Reques EIRQ %d succesd on GPIO:%d\n",TS_INT,INT_PORT); + } +#endif + + + if (!ts->use_irq) + { + hrtimer_init(&ts->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); + ts->timer.function = goodix_ts_timer_func; + hrtimer_start(&ts->timer, ktime_set(1, 0), HRTIMER_MODE_REL); + } + + if(ts->use_irq) + #ifndef STOP_IRQ_TYPE + gt811_irq_enable(ts); //KT ADD 1202 + //#elif + // enable_irq(client->irq); + #endif + + ts->power = goodix_ts_power; + + goodix_read_version(ts); + +#ifdef CONFIG_HAS_EARLYSUSPEND + ts->early_suspend.level = EARLY_SUSPEND_LEVEL_DISABLE_FB;//EARLY_SUSPEND_LEVEL_BLANK_SCREEN +1; + ts->early_suspend.suspend = goodix_ts_early_suspend; + ts->early_suspend.resume = goodix_ts_late_resume; + register_early_suspend(&ts->early_suspend); +#endif + +/////////////////////////////// UPDATE STEP 2 START ///////////////////////////////////////////////////////////////// +#ifdef CONFIG_TOUCHSCREEN_GOODIX_IAP + goodix_proc_entry = create_proc_entry("goodix-update", 0666, NULL); + if(goodix_proc_entry == NULL) + { + dev_info(&client->dev, "Couldn't create proc entry!\n"); + ret = -ENOMEM; + goto err_create_proc_entry; + } + else + { + dev_info(&client->dev, "Create proc entry success!\n"); + goodix_proc_entry->write_proc = goodix_update_write; + goodix_proc_entry->read_proc = goodix_update_read; + } +#endif +///////////////////////////////UPDATE STEP 2 END ///////////////////////////////////////////////////////////////// + dev_info(&client->dev,"Start %s in %s mode,Driver Modify Date:2012-01-05\n", + ts->input_dev->name, ts->use_irq ? "interrupt" : "polling"); + return 0; + +err_init_godix_ts: + i2c_end_cmd(ts); + if(ts->use_irq) + { + ts->use_irq = 0; + free_irq(client->irq,ts); + #ifdef INT_PORT + gpio_direction_input(INT_PORT); + gpio_free(INT_PORT); + #endif + } + else + hrtimer_cancel(&ts->timer); + +err_input_register_device_failed: + input_free_device(ts->input_dev); + +err_input_dev_alloc_failed: + i2c_set_clientdata(client, NULL); +err_gpio_request: + gpio_free(SHUTDOWN_PORT); +err_i2c_failed: + kfree(ts); +err_alloc_data_failed: +err_check_functionality_failed: +err_create_proc_entry: + return ret; +} + + +/******************************************************* +Function: + Drive the release of resources +Parameters: + client: the device structure +return: + Results of the implementation code, 0 for normal execution +********************************************************/ +static int goodix_ts_remove(struct i2c_client *client) +{ + struct gt811_ts_data *ts = i2c_get_clientdata(client); +#ifdef CONFIG_HAS_EARLYSUSPEND + unregister_early_suspend(&ts->early_suspend); +#endif +/////////////////////////////// UPDATE STEP 3 START///////////////////////////////////////////////////////////////// +#ifdef CONFIG_TOUCHSCREEN_GOODIX_IAP + remove_proc_entry("goodix-update", NULL); +#endif +/////////////////////////////////UPDATE STEP 3 END/////////////////////////////////////////////////////////////// + + if (ts && ts->use_irq) + { + #ifdef INT_PORT + gpio_direction_input(INT_PORT); + gpio_free(INT_PORT); + #endif + free_irq(client->irq, ts); + } + else if(ts) + hrtimer_cancel(&ts->timer); + + dev_notice(&client->dev,"The driver is removing...\n"); + i2c_set_clientdata(client, NULL); + input_unregister_device(ts->input_dev); + kfree(ts); + return 0; +} + +//停用设备 +static int goodix_ts_suspend(struct i2c_client *client, pm_message_t mesg) +{ + int ret; + struct gt811_ts_data *ts = i2c_get_clientdata(client); + disable_irq(client->irq); + if (ts->power) + { + } +} +static int goodix_ts_resume(struct i2c_client *client) +{ + int ret; + struct gt811_ts_data *ts = i2c_get_clientdata(client); + + if (ts->power) { + ret = ts->power(ts, 1); + printk("resume >>>>>>>>>ret=%d",ret); + if (ret < 0) + printk(KERN_ERR "goodix_ts_resume power on failed\n"); + } + enable_irq(client->irq); + return 0; +} + +#ifdef CONFIG_HAS_EARLYSUSPEND +static void goodix_ts_early_suspend(struct early_suspend *h) +{ + struct gt811_ts_data *ts; + ts = container_of(h, struct gt811_ts_data, early_suspend); + goodix_ts_suspend(ts->client, PMSG_SUSPEND); +} + +static void goodix_ts_late_resume(struct early_suspend *h) +{ + struct gt811_ts_data *ts; + ts = container_of(h, struct gt811_ts_data, early_suspend); + goodix_ts_resume(ts->client); +} +#endif +/////////////////////////////// UPDATE STEP 4 START///////////////////////////////////////////////////////////////// +//******************************Begin of firmware update surpport******************************* +#ifdef CONFIG_TOUCHSCREEN_GOODIX_IAP +static struct file * update_file_open(char * path, mm_segment_t * old_fs_p) +{ + struct file * filp = NULL; + int errno = -1; + + filp = filp_open(path, O_RDONLY, 0644); + + if(!filp || IS_ERR(filp)) + { + if(!filp) + errno = -ENOENT; + else + errno = PTR_ERR(filp); + printk(KERN_ERR "The update file for Guitar open error.\n"); + return NULL; + } + *old_fs_p = get_fs(); + set_fs(get_ds()); + + filp->f_op->llseek(filp,0,0); + return filp ; +} + +static void update_file_close(struct file * filp, mm_segment_t old_fs) +{ + set_fs(old_fs); + if(filp) + filp_close(filp, NULL); +} +static int update_get_flen(char * path) +{ + struct file * file_ck = NULL; + mm_segment_t old_fs; + int length ; + + file_ck = update_file_open(path, &old_fs); + if(file_ck == NULL) + return 0; + + length = file_ck->f_op->llseek(file_ck, 0, SEEK_END); + //printk("File length: %d\n", length); + if(length < 0) + length = 0; + update_file_close(file_ck, old_fs); + return length; +} + +static int goodix_update_write(struct file *filp, const char __user *buff, unsigned long len, void *data) +{ + unsigned char cmd[120]; + int ret = -1; + int retry = 0; + static unsigned char update_path[60]; + struct gt811_ts_data *ts; + struct file * file_data = NULL; + mm_segment_t old_fs; + unsigned char *file_ptr = NULL; + unsigned int file_len; + + ts = i2c_get_clientdata(i2c_connect_client); + if(ts==NULL) + { + printk(KERN_INFO"goodix write to kernel via proc file!@@@@@@\n"); + return 0; + } + + //printk(KERN_INFO"goodix write to kernel via proc file!@@@@@@\n"); + if(copy_from_user(&cmd, buff, len)) + { + printk(KERN_INFO"goodix write to kernel via proc file!@@@@@@\n"); + return -EFAULT; + } + //printk(KERN_INFO"Write cmd is:%d,write len is:%ld\n",cmd[0], len); + switch(cmd[0]) + { + case APK_UPDATE_TP: + printk(KERN_INFO"Write cmd is:%d,cmd arg is:%s,write len is:%ld\n",cmd[0], &cmd[1], len); + memset(update_path, 0, 60); + strncpy(update_path, cmd+1, 60); + +#ifndef STOP_IRQ_TYPE + gt811_irq_disable(ts); //KT ADD 1202 +//#elif +// disable_irq(ts->client->irq); +#endif + file_data = update_file_open(update_path, &old_fs); + if(file_data == NULL) //file_data has been opened at the last time + { + dev_info(&ts->client->dev, "cannot open update file\n"); + return 0; + } + + file_len = update_get_flen(update_path); + dev_info(&ts->client->dev, "Update file length:%d\n", file_len); + file_ptr = (unsigned char*)vmalloc(file_len); + if(file_ptr==NULL) + { + dev_info(&ts->client->dev, "cannot malloc memory!\n"); + return 0; + } + + ret = file_data->f_op->read(file_data, file_ptr, file_len, &file_data->f_pos); + if(ret <= 0) + { + dev_info(&ts->client->dev, "read file data failed\n"); + return 0; + } + update_file_close(file_data, old_fs); + + ret = gt811_downloader(ts, file_ptr); + vfree(file_ptr); + if(ret < 0) + { + printk(KERN_INFO"Warnning: GT811 update might be ERROR!\n"); + return 0; + } + + // i2c_pre_cmd(ts); + + gpio_direction_output(SHUTDOWN_PORT, 0); + msleep(5); + gpio_direction_input(SHUTDOWN_PORT); + msleep(20); + for(retry=0; retry<3; retry++) + { + ret=goodix_init_panel(ts); + msleep(2); + if(ret != 0) //Initiall failed + { + dev_info(&ts->client->dev, "Init panel failed!\n"); + continue; + } + else + break; + + } + + // s3c_gpio_cfgpin(INT_PORT, INT_CFG); //Set IO port function + //gpio_direction_input(INT_PORT); +// s3c_gpio_setpull(INT_PORT, S3C_GPIO_PULL_UP); +// s3c_gpio_cfgpin(INT_PORT, INT_CFG); //Set IO port as interrupt port + //s3c_gpio_setpull(INT_PORT, S3C_GPIO_PULL_NONE); +// while(1); +#ifndef STOP_IRQ_TYPE + gt811_irq_enable(ts); //KT ADD 1202 +//#elif +// enable_irq(ts->client->irq); +#endif +// i2c_end_cmd(ts); + return 1; + + case APK_READ_FUN: //functional command + if(cmd[1] == CMD_READ_VER) + { + printk(KERN_INFO"Read version!\n"); + ts->read_mode = MODE_RD_VER; + } + else if(cmd[1] == CMD_READ_CFG) + { + printk(KERN_INFO"Read config info!\n"); + + ts->read_mode = MODE_RD_CFG; + } + else if (cmd[1] == CMD_READ_RAW) + { + printk(KERN_INFO"Read raw data!\n"); + + ts->read_mode = MODE_RD_RAW; + } + else if (cmd[1] == CMD_READ_CHIP_TYPE) + { + printk(KERN_INFO"Read chip type!\n"); + + ts->read_mode = MODE_RD_CHIP_TYPE; + } + return 1; + + case APK_WRITE_CFG: + printk(KERN_INFO"Begin write config info!Config length:%d\n",cmd[1]); + i2c_pre_cmd(ts); + ret = i2c_write_bytes(ts->client, cmd+2, cmd[1]+2); + i2c_end_cmd(ts); + if(ret != 1) + { + printk("Write Config failed!return:%d\n",ret); + return -1; + } + return 1; + + default: + return 0; + } + return 0; +} + +static int goodix_update_read( char *page, char **start, off_t off, int count, int *eof, void *data ) +{ + int ret = -1; + int len = 0; + int read_times = 0; + struct gt811_ts_data *ts; + + unsigned char read_data[360] = {80, }; + + ts = i2c_get_clientdata(i2c_connect_client); + if(ts==NULL) + return 0; + + printk("___READ__\n"); + if(ts->read_mode == MODE_RD_VER) //read version data + { + i2c_pre_cmd(ts); + ret = goodix_read_version(ts); + i2c_end_cmd(ts); + if(ret < 0) + { + printk(KERN_INFO"Read version data failed!\n"); + return 0; + } + + read_data[1] = (char)(ts->version&0xff); + read_data[0] = (char)((ts->version>>8)&0xff); + + memcpy(page, read_data, 2); + //*eof = 1; + return 2; + } + else if (ts->read_mode == MODE_RD_CHIP_TYPE) + { + page[0] = GT811; + return 1; + } + else if(ts->read_mode == MODE_RD_CFG) + { + + read_data[0] = 0x06; + read_data[1] = 0xa2; // cfg start address + printk("read config addr is:%x,%x\n", read_data[0],read_data[1]); + + len = 106; + i2c_pre_cmd(ts); + ret = i2c_read_bytes(ts->client, read_data, len+2); + i2c_end_cmd(ts); + if(ret <= 0) + { + printk(KERN_INFO"Read config info failed!\n"); + return 0; + } + + memcpy(page, read_data+2, len); + return len; + } + else if (ts->read_mode == MODE_RD_RAW) + { +#define TIMEOUT (-100) + int retry = 0; + if (raw_data_ready != RAW_DATA_READY) + { + raw_data_ready = RAW_DATA_ACTIVE; + } + +RETRY: + read_data[0] = 0x07; + read_data[1] = 0x11; + read_data[2] = 0x01; + + ret = i2c_write_bytes(ts->client, read_data, 3); + +#ifdef DEBUG + sum += read_times; + printk("count :%d\n", ++access_count); + printk("A total of try times:%d\n", sum); +#endif + + read_times = 0; + while (RAW_DATA_READY != raw_data_ready) + { + msleep(4); + + if (read_times++ > 10) + { + if (retry++ > 5) + { + return TIMEOUT; + } + goto RETRY; + } + } +#ifdef DEBUG + printk("read times:%d\n", read_times); +#endif + read_data[0] = 0x08; + read_data[1] = 0x80; // raw data address + + len = 160; + + // msleep(4); + + i2c_pre_cmd(ts); + ret = i2c_read_bytes(ts->client, read_data, len+2); + // i2c_end_cmd(ts); + + if(ret <= 0) + { + printk(KERN_INFO"Read raw data failed!\n"); + return 0; + } + memcpy(page, read_data+2, len); + + read_data[0] = 0x09; + read_data[1] = 0xC0; + // i2c_pre_cmd(ts); + ret = i2c_read_bytes(ts->client, read_data, len+2); + i2c_end_cmd(ts); + + if(ret <= 0) + { + printk(KERN_INFO"Read raw data failed!\n"); + return 0; + } + memcpy(&page[160], read_data+2, len); + +#ifdef DEBUG +//************** + for (i = 0; i < 300; i++) + { + printk("%6x", page[i]); + + if ((i+1) % 10 == 0) + { + printk("\n"); + } + } +//********************/ +#endif + raw_data_ready = RAW_DATA_NON_ACTIVE; + + return (2*len); + + } + return 0; +#endif +} +//******************************************************************************************** +static u8 is_equal( u8 *src , u8 *dst , int len ) +{ + int i; + +#if 0 + for( i = 0 ; i < len ; i++ ) + { + printk(KERN_INFO"[%02X:%02X]", src[i], dst[i]); + if((i+1)%10==0)printk("\n"); + } +#endif + + for( i = 0 ; i < len ; i++ ) + { + if ( src[i] != dst[i] ) + { + return 0; + } + } + + return 1; +} + +static u8 gt811_nvram_store( struct gt811_ts_data *ts ) +{ + int ret; + int i; + u8 inbuf[3] = {REG_NVRCS_H,REG_NVRCS_L,0}; + //u8 outbuf[3] = {}; + ret = i2c_read_bytes( ts->client, inbuf, 3 ); + + if ( ret < 0 ) + { + return 0; + } + + if ( ( inbuf[2] & BIT_NVRAM_LOCK ) == BIT_NVRAM_LOCK ) + { + return 0; + } + + inbuf[2] = (1<client, inbuf, 3 ); + + if ( ret < 0 ) + break; + } + + return ret; +} + +static u8 gt811_nvram_recall( struct gt811_ts_data *ts ) +{ + int ret; + u8 inbuf[3] = {REG_NVRCS_H,REG_NVRCS_L,0}; + + ret = i2c_read_bytes( ts->client, inbuf, 3 ); + + if ( ret < 0 ) + { + return 0; + } + + if ( ( inbuf[2]&BIT_NVRAM_LOCK) == BIT_NVRAM_LOCK ) + { + return 0; + } + + inbuf[2] = ( 1 << BIT_NVRAM_RECALL ); //recall command + ret = i2c_write_bytes( ts->client , inbuf, 3); + return ret; +} + +static int gt811_reset( struct gt811_ts_data *ts ) +{ + int ret = 1; + u8 retry; + + unsigned char outbuf[3] = {0,0xff,0}; + unsigned char inbuf[3] = {0,0xff,0}; + //outbuf[1] = 1; + + gpio_direction_output(SHUTDOWN_PORT,0); + msleep(20); + gpio_direction_input(SHUTDOWN_PORT); + msleep(100); + for(retry=0;retry < 80; retry++) + { + ret =i2c_write_bytes(ts->client, inbuf, 0); //Test I2C connection. + if (ret > 0) + { + msleep(10); + ret =i2c_read_bytes(ts->client, inbuf, 3); //Test I2C connection. + if (ret > 0) + { + if(inbuf[2] == 0x55) + { + ret =i2c_write_bytes(ts->client, outbuf, 3); + msleep(10); + break; + } + } + } + else + { + gpio_direction_output(SHUTDOWN_PORT,0); + msleep(20); + gpio_direction_input(SHUTDOWN_PORT); + msleep(20); + dev_info(&ts->client->dev, "i2c address failed\n"); + } + + } + dev_info(&ts->client->dev, "Detect address %0X\n", ts->client->addr); + //msleep(500); + return ret; +} + +static int gt811_reset2( struct gt811_ts_data *ts ) +{ + int ret = 1; + u8 retry; + + //unsigned char outbuf[3] = {0,0xff,0}; + unsigned char inbuf[3] = {0,0xff,0}; + //outbuf[1] = 1; + + gpio_direction_output(SHUTDOWN_PORT,0); + msleep(20); + gpio_direction_input(SHUTDOWN_PORT); + msleep(100); + for(retry=0;retry < 80; retry++) + { + ret =i2c_write_bytes(ts->client, inbuf, 0); //Test I2C connection. + if (ret > 0) + { + msleep(10); + ret =i2c_read_bytes(ts->client, inbuf, 3); //Test I2C connection. + if (ret > 0) + { + // if(inbuf[2] == 0x55) + // { + // ret =i2c_write_bytes(ts->client, outbuf, 3); + // msleep(10); + break; + // } + } + } + + } + dev_info(&ts->client->dev, "Detect address %0X\n", ts->client->addr); + //msleep(500); + return ret; +} +static int gt811_set_address_2( struct gt811_ts_data *ts ) +{ + unsigned char inbuf[3] = {0,0,0}; + int i; + + for ( i = 0 ; i < 12 ; i++ ) + { + if ( i2c_read_bytes( ts->client, inbuf, 3) ) + { + dev_info(&ts->client->dev, "Got response\n"); + return 1; + } + dev_info(&ts->client->dev, "wait for retry\n"); + msleep(50); + } + return 0; +} +static u8 gt811_update_firmware( u8 *nvram, u16 start_addr, u16 length, struct gt811_ts_data *ts) +{ + u8 ret,err,retry_time,i; + u16 cur_code_addr; + u16 cur_frame_num, total_frame_num, cur_frame_len; + u32 gt80x_update_rate; + + unsigned char i2c_data_buf[PACK_SIZE+2] = {0,}; + unsigned char i2c_chk_data_buf[PACK_SIZE+2] = {0,}; + + if( length > NVRAM_LEN - NVRAM_BOOT_SECTOR_LEN ) + { + dev_info(&ts->client->dev, "Fw length %d is bigger than limited length %d\n", length, NVRAM_LEN - NVRAM_BOOT_SECTOR_LEN ); + return 0; + } + + total_frame_num = ( length + PACK_SIZE - 1) / PACK_SIZE; + + //gt80x_update_sta = _UPDATING; + gt80x_update_rate = 0; + + for( cur_frame_num = 0 ; cur_frame_num < total_frame_num ; cur_frame_num++ ) + { + retry_time = 5; + + dev_info(&ts->client->dev, "PACK[%d]\n",cur_frame_num); + cur_code_addr = /*NVRAM_UPDATE_START_ADDR*/start_addr + cur_frame_num * PACK_SIZE; + i2c_data_buf[0] = (cur_code_addr>>8)&0xff; + i2c_data_buf[1] = cur_code_addr&0xff; + + i2c_chk_data_buf[0] = i2c_data_buf[0]; + i2c_chk_data_buf[1] = i2c_data_buf[1]; + + if( cur_frame_num == total_frame_num - 1 ) + { + cur_frame_len = length - cur_frame_num * PACK_SIZE; + } + else + { + cur_frame_len = PACK_SIZE; + } + + //strncpy(&i2c_data_buf[2], &nvram[cur_frame_num*PACK_SIZE], cur_frame_len); + for(i=0;iclient, i2c_data_buf, (cur_frame_len+2)); + if ( ret <= 0 ) + { + dev_info(&ts->client->dev, "write fail\n"); + err = 1; + } + + ret = i2c_read_bytes(ts->client, i2c_chk_data_buf, (cur_frame_len+2)); + // ret = gt811_i2c_read( guitar_i2c_address, cur_code_addr, inbuf, cur_frame_len); + if ( ret <= 0 ) + { + dev_info(&ts->client->dev, "read fail\n"); + err = 1; + } + + if( is_equal( &i2c_data_buf[2], &i2c_chk_data_buf[2], cur_frame_len ) == 0 ) + { + dev_info(&ts->client->dev, "not equal\n"); + err = 1; + } + + } while ( err == 1 && (--retry_time) > 0 ); + + if( err == 1 ) + { + break; + } + + gt80x_update_rate = ( cur_frame_num + 1 )*128/total_frame_num; + + } + + if( err == 1 ) + { + dev_info(&ts->client->dev, "write nvram fail\n"); + return 0; + } + + ret = gt811_nvram_store(ts); + + msleep( 20 ); + + if( ret == 0 ) + { + dev_info(&ts->client->dev, "nvram store fail\n"); + return 0; + } + + ret = gt811_nvram_recall(ts); + + msleep( 20 ); + + if( ret == 0 ) + { + dev_info(&ts->client->dev, "nvram recall fail\n"); + return 0; + } + + for ( cur_frame_num = 0 ; cur_frame_num < total_frame_num ; cur_frame_num++ ) // read out all the code + { + + cur_code_addr = NVRAM_UPDATE_START_ADDR + cur_frame_num*PACK_SIZE; + retry_time=5; + i2c_chk_data_buf[0] = (cur_code_addr>>8)&0xff; + i2c_chk_data_buf[1] = cur_code_addr&0xff; + + + if ( cur_frame_num == total_frame_num-1 ) + { + cur_frame_len = length - cur_frame_num*PACK_SIZE; + } + else + { + cur_frame_len = PACK_SIZE; + } + + do + { + err = 0; + //ret = gt811_i2c_read( guitar_i2c_address, cur_code_addr, inbuf, cur_frame_len); + ret = i2c_read_bytes(ts->client, i2c_chk_data_buf, (cur_frame_len+2)); + + if ( ret == 0 ) + { + err = 1; + } + + if( is_equal( &nvram[cur_frame_num*PACK_SIZE], &i2c_chk_data_buf[2], cur_frame_len ) == 0 ) + { + err = 1; + } + } while ( err == 1 && (--retry_time) > 0 ); + + if( err == 1 ) + { + break; + } + + gt80x_update_rate = 127 + ( cur_frame_num + 1 )*128/total_frame_num; + } + + gt80x_update_rate = 255; + //gt80x_update_sta = _UPDATECHKCODE; + + if( err == 1 ) + { + dev_info(&ts->client->dev, "nvram validate fail\n"); + return 0; + } + + return 1; +} + +static u8 gt811_update_proc( u8 *nvram, u16 start_addr , u16 length, struct gt811_ts_data *ts ) +{ + u8 ret; + u8 error = 0; + //struct tpd_info_t tpd_info; + GT811_SET_INT_PIN( 0 ); + msleep( 20 ); + ret = gt811_reset(ts); + if ( ret < 0 ) + { + error = 1; + dev_info(&ts->client->dev, "reset fail\n"); + goto end; + } + + ret = gt811_set_address_2( ts ); + if ( ret == 0 ) + { + error = 1; + dev_info(&ts->client->dev, "set address fail\n"); + goto end; + } + + ret = gt811_update_firmware( nvram, start_addr, length, ts); + if ( ret == 0 ) + { + error=1; + dev_info(&ts->client->dev, "firmware update fail\n"); + goto end; + } + +end: + GT811_SET_INT_PIN( 1 ); +// gpio_free(INT_PORT); + gpio_pull_updown(INT_PORT, NULL); + + msleep( 500 ); + ret = gt811_reset2(ts); + if ( ret < 0 ) + { + error=1; + dev_info(&ts->client->dev, "final reset fail\n"); + goto end; + } + if ( error == 1 ) + { + return 0; + } + +// i2c_pre_cmd(ts); + while(goodix_read_version(ts)<0); + +// i2c_end_cmd(ts); + return 1; +} + +u16 Little2BigEndian(u16 little_endian) +{ + u16 temp = 0; + temp = little_endian&0xff; + return (temp<<8)+((little_endian>>8)&0xff); +} + +int gt811_downloader( struct gt811_ts_data *ts, unsigned char * data) +{ + struct tpd_firmware_info_t *fw_info = (struct tpd_firmware_info_t *)data; + //int i; + //unsigned short checksum = 0; + //unsigned int checksum = 0; + unsigned int fw_checksum = 0; + //unsigned char fw_chip_type; + unsigned short fw_version; + unsigned short fw_start_addr; + unsigned short fw_length; + unsigned char *data_ptr; + //unsigned char *file_ptr = &(fw_info->chip_type); + int retry = 0,ret; + int err = 0; + unsigned char rd_buf[4] = {0}; + unsigned char *mandatory_base = "GOODIX"; + unsigned char rd_rom_version; + unsigned char rd_chip_type; + unsigned char rd_nvram_flag; + + //struct file * file_data = NULL; + //mm_segment_t old_fs; + //unsigned int rd_len; + //unsigned int file_len = 0; + //unsigned char i2c_data_buf[PACK_SIZE] = {0,}; + + rd_buf[0]=0x14; + rd_buf[1]=0x00; + rd_buf[2]=0x80; + ret = i2c_write_bytes(ts->client, rd_buf, 3); + if(ret<0) + { + dev_info(&ts->client->dev, "i2c write failed\n"); + goto exit_downloader; + } + rd_buf[0]=0x40; + rd_buf[1]=0x11; + ret = i2c_read_bytes(ts->client, rd_buf, 3); + if(ret<=0) + { + dev_info(&ts->client->dev, "i2c request failed!\n"); + goto exit_downloader; + } + rd_chip_type = rd_buf[2]; + rd_buf[0]=0xFB; + rd_buf[1]=0xED; + ret = i2c_read_bytes(ts->client, rd_buf, 3); + if(ret<=0) + { + dev_info(&ts->client->dev, "i2c read failed!\n"); + goto exit_downloader; + } + rd_rom_version = rd_buf[2]; + rd_buf[0]=0x06; + rd_buf[1]=0x94; + ret = i2c_read_bytes(ts->client, rd_buf, 3); + if(ret<=0) + { + dev_info(&ts->client->dev, "i2c read failed!\n"); + goto exit_downloader; + } + rd_nvram_flag = rd_buf[2]; + + fw_version = Little2BigEndian(fw_info->version); + fw_start_addr = Little2BigEndian(fw_info->start_addr); + fw_length = Little2BigEndian(fw_info->length); + data_ptr = &(fw_info->data); + + dev_info(&ts->client->dev,"chip_type=0x%02x\n", fw_info->chip_type); + dev_info(&ts->client->dev,"version=0x%04x\n", fw_version); + dev_info(&ts->client->dev,"rom_version=0x%02x\n",fw_info->rom_version); + dev_info(&ts->client->dev,"start_addr=0x%04x\n",fw_start_addr); + dev_info(&ts->client->dev,"file_size=0x%04x\n",fw_length); + fw_checksum = ((u32)fw_info->checksum[0]<<16) + ((u32)fw_info->checksum[1]<<8) + ((u32)fw_info->checksum[2]); + dev_info(&ts->client->dev,"fw_checksum=0x%06x\n",fw_checksum); + dev_info(&ts->client->dev,"%s\n", __func__ ); + dev_info(&ts->client->dev,"current version 0x%04X, target verion 0x%04X\n", ts->version, fw_version ); + +//chk_chip_type: + if(rd_chip_type!=fw_info->chip_type) + { + dev_info(&ts->client->dev, "Chip type not match,exit downloader\n"); + goto exit_downloader; + } + +//chk_mask_version: + if(!rd_rom_version) + { + if(fw_info->rom_version!=0x45) + { + dev_info(&ts->client->dev, "Rom version not match,exit downloader\n"); + goto exit_downloader; + } + dev_info(&ts->client->dev, "Rom version E.\n"); + goto chk_fw_version; + } + else if(rd_rom_version!=fw_info->rom_version); + { + dev_info(&ts->client->dev, "Rom version not match,exidownloader\n"); + goto exit_downloader; + } + dev_info(&ts->client->dev, "Rom version %c\n",rd_rom_version); + +//chk_nvram: + if(rd_nvram_flag==0x55) + { + dev_info(&ts->client->dev, "NVRAM correct!\n"); + goto chk_fw_version; + } + else if(rd_nvram_flag==0xAA) + { + dev_info(&ts->client->dev, "NVRAM incorrect!Need update.\n"); + goto begin_upgrade; + } + else + { + dev_info(&ts->client->dev, "NVRAM other error![0x694]=0x%02x\n", rd_nvram_flag); + goto begin_upgrade; + } +chk_fw_version: +// ts->version -= 1; //test by andrew + if( ts->version >= fw_version ) // current low byte higher than back-up low byte + { + dev_info(&ts->client->dev, "Fw verison not match.\n"); + goto chk_mandatory_upgrade; + } + dev_info(&ts->client->dev,"Need to upgrade\n"); + goto begin_upgrade; +chk_mandatory_upgrade: +// dev_info(&ts->client->dev, "%s\n", mandatory_base); +// dev_info(&ts->client->dev, "%s\n", fw_info->mandatory_flag); + ret = memcmp(mandatory_base, fw_info->mandatory_flag, 6); + if(ret) + { + dev_info(&ts->client->dev,"Not meet mandatory upgrade,exit downloader!ret:%d\n", ret); + goto exit_downloader; + } + dev_info(&ts->client->dev, "Mandatory upgrade!\n"); +begin_upgrade: + dev_info(&ts->client->dev, "Begin upgrade!\n"); + // goto exit_downloader; + dev_info(&ts->client->dev,"STEP_0:\n"); + + + dev_info(&ts->client->dev, "STEP_1:\n"); + err = -1; + while( retry < 3 ) + { +// ret = gt811_update_proc( data_ptr,fw_start_addr, fw_length, ts); + if(ret == 1) + { + err = 1; + break; + } + retry++; + } + +exit_downloader: + //mt_set_gpio_mode(GPIO_CTP_EINT_PIN, GPIO_CTP_EINT_PIN_M_EINT); + // mt_set_gpio_out(GPIO_CTP_EN_PIN, GPIO_OUT_ONE); + // gpio_direction_output(INT_PORT,1); + // msleep(1); + gpio_free(INT_PORT); + gpio_pull_updown(INT_PORT, NULL); + return err; + +} +//******************************End of firmware update surpport******************************* +/////////////////////////////// UPDATE STEP 4 END ///////////////////////////////////////////////////////////////// + +//可用于该驱动çš?设备名—设备ID 列表 +//only one client +static const struct i2c_device_id goodix_ts_id[] = { + { GOODIX_I2C_NAME, 0 }, + { } +}; + +//设备驱动结构ä½? +static struct i2c_driver goodix_ts_driver = { + .probe = goodix_ts_probe, + .remove = goodix_ts_remove, +#ifndef CONFIG_HAS_EARLYSUSPEND + .suspend = goodix_ts_suspend, + .resume = goodix_ts_resume, +#endif + .id_table = goodix_ts_id, + .driver = { + .name = GOODIX_I2C_NAME, + .owner = THIS_MODULE, + }, +}; + +/******************************************************* +功能ï¼? 驱动加载函数 +returnï¼? 执行结果码，0表示正常执行 +********************************************************/ +static int __devinit goodix_ts_init(void) +{ + int ret; + + goodix_wq = create_workqueue("goodix_wq"); //create a work queue and worker thread + if (!goodix_wq) { + printk(KERN_ALERT "creat workqueue faiked\n"); + return -ENOMEM; + + } + ret=i2c_add_driver(&goodix_ts_driver); + return ret; +} + +/******************************************************* +功能ï¼? 驱动卸载函数 +参数ï¼? client：设备结构体 +********************************************************/ +static void __exit goodix_ts_exit(void) +{ + printk(KERN_ALERT "Touchscreen driver of guitar exited.\n"); + i2c_del_driver(&goodix_ts_driver); + if (goodix_wq) + destroy_workqueue(goodix_wq); //release our work queue +} + +late_initcall_sync(goodix_ts_init); //最后初始化驱动felix +module_exit(goodix_ts_exit); + +MODULE_DESCRIPTION("Goodix Touchscreen Driver"); +MODULE_LICENSE("GPL"); + diff --git a/drivers/input/touchscreen/gt811_ts.h b/drivers/input/touchscreen/gt811_ts.h new file mode 100755 index 000000000000..7eb59a865248 --- /dev/null +++ b/drivers/input/touchscreen/gt811_ts.h @@ -0,0 +1,277 @@ +/* drivers/input/touchscreen/gt811.h + * + * Copyright (C) 2010 - 2011 Goodix, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + *Any problem,please contact andrew@goodix.com,+86 755-33338828 + * + */ + +#ifndef _LINUX_GT811_H +#define _LINUX_GT811_H + +#include +#include +#include +#include + +//*************************TouchScreen Work Part***************************** +#define GOODIX_I2C_NAME "gt811_ts" +#define GT801_PLUS +#define GT801_NUVOTON +#define GUITAR_UPDATE_STATE 0x02 + +//define resolution of the touchscreen +#define TOUCH_MAX_HEIGHT 800 +#define TOUCH_MAX_WIDTH 480 +//#define STOP_IRQ_TYPE // if define then no stop irq in irq_handle kuuga add 1202S +#define REFRESH 0 //0~0x64 Scan rate = 10000/(100+REFRESH)//define resolution of the LCD + +#define SHUTDOWN_PORT RK2928_PIN3_PC3 +#define INT_PORT RK2928_PIN3_PC7 + + +#ifdef INT_PORT + #define TS_INT gpio_to_irq(INT_PORT) //Interrupt Number,EINT18(119) +// #define INT_CFG S3C_GPIO_SFN(3) //IO configer as EINT +#else + #define TS_INT 0 +#endif + +/////////////////////////////// UPDATE STEP 5 START ///////////////////////////////////////////////////////////////// +#define TPD_CHIP_VERSION_C_FIRMWARE_BASE 0x5A +#define TPD_CHIP_VERSION_D1_FIRMWARE_BASE 0x7A +#define TPD_CHIP_VERSION_E_FIRMWARE_BASE 0x9A +#define TPD_CHIP_VERSION_D2_FIRMWARE_BASE 0xBA + + +/////////////////////////////// UPDATE STEP 5 END ///////////////////////////////////////////////////////////////// + +#define FLAG_UP 0 +#define FLAG_DOWN 1 +//set GT801 PLUS trigger mode,Ö»ÄÜÉèÖÃ0»ò1 +//#define INT_TRIGGER 1 // 1=rising 0=falling +#define POLL_TIME 10 //actual query spacing interval:POLL_TIME+6 + +#define GOODIX_MULTI_TOUCH +#ifdef GOODIX_MULTI_TOUCH + #define MAX_FINGER_NUM 5 +#else + #define MAX_FINGER_NUM 1 +#endif + +#if defined(INT_PORT) + #if MAX_FINGER_NUM <= 3 + #define READ_BYTES_NUM 2+2+MAX_FINGER_NUM*5 + #elif MAX_FINGER_NUM == 4 + #define READ_BYTES_NUM 2+28 + #elif MAX_FINGER_NUM == 5 + #define READ_BYTES_NUM 2+34 + #endif +#else + #define READ_BYTES_NUM 2+34 +#endif + +#define swap(x, y) do { typeof(x) z = x; x = y; y = z; } while (0) + +#define READ_TOUCH_ADDR_H 0x07 +#define READ_TOUCH_ADDR_L 0x21 //GT811 0x721 +#define READ_KEY_ADDR_H 0x07 +#define READ_KEY_ADDR_L 0x21 +#define READ_COOR_ADDR_H 0x07 +#define READ_COOR_ADDR_L 0x22 +#define READ_ID_ADDR_H 0x00 +#define READ_ID_ADDR_L 0xff +//****************************Éý¼¶Ä£¿é²ÎÊý****************************************** + +//****************************************************************************** +struct gt811_ts_data { + uint16_t addr; + uint8_t bad_data; + struct i2c_client *client; + struct input_dev *input_dev; + int use_reset; //use RESET flag + int use_irq; //use EINT flag + int read_mode; //read moudle mode,20110221 by andrew + struct hrtimer timer; + struct work_struct work; + char phys[32]; + int retry; + int irq; + spinlock_t irq_lock; //add by kuuga + int irq_is_disable; /* 0: irq enable */ //add by kuuga + uint16_t abs_x_max; + uint16_t abs_y_max; + uint8_t max_touch_num; + uint8_t int_trigger_type; + uint8_t btn_state; // key states +/////////////////////////////// UPDATE STEP 6 START ///////////////////////////////////////////////////////////////// + unsigned int version; +/////////////////////////////// UPDATE STEP 6 END ///////////////////////////////////////////////////////////////// + + struct early_suspend early_suspend; + int (*power)(struct gt811_ts_data * ts, int on); +}; + +//*****************************End of Part I ********************************* + +//*************************Touchkey Surpport Part***************************** +/*#define HAVE_TOUCH_KEY +//#define READ_KEY_VALUE +//#define READ_KEY_COOR + +#ifdef HAVE_TOUCH_KEY + const uint16_t toucher_key_array[]={ + KEY_MENU, //MENU + KEY_HOME, + KEY_BACK, + KEY_SEARCH + }; + #define MAX_KEY_NUM (sizeof(toucher_key_array)/sizeof(toucher_key_array[0])) +#endif +*/ +//#define COOR_TO_KEY + #ifdef COOR_TO_KEY + + #define KEY_X 40 + #define KEY_Y 20 + #if 0 + #define AREA_X 0 + #else + #define AREA_Y 800 + #endif + + enum {x, y}; + s32 key_center[MAX_KEY_NUM][2] = { + + {48,840},{124,840},{208,840},{282,840} + + }; + + #endif + +//*****************************End of Part II********************************* + +/////////////////////////////// UPDATE STEP 7 START ///////////////////////////////////////////////////////////////// +//*************************Firmware Update part******************************* +//#define AUTO_UPDATE_GT811 + +#define CONFIG_TOUCHSCREEN_GOODIX_IAP +#ifdef CONFIG_TOUCHSCREEN_GOODIX_IAP +static int goodix_update_write(struct file *filp, const char __user *buff, unsigned long len, void *data); +static int goodix_update_read( char *page, char **start, off_t off, int count, int *eof, void *data ); + +#define PACK_SIZE 64 //update file package size +//#define MAX_TIMEOUT 30000 //update time out conut +//#define MAX_I2C_RETRIES 10 //i2c retry times + +//write cmd +#define APK_UPDATE_TP 1 +#define APK_READ_FUN 10 +#define APK_WRITE_CFG 11 + +//fun cmd +//#define CMD_DISABLE_TP 0 +//#define CMD_ENABLE_TP 1 +#define CMD_READ_VER 2 +#define CMD_READ_RAW 3 +#define CMD_READ_DIF 4 +#define CMD_READ_CFG 5 +#define CMD_READ_CHIP_TYPE 6 +//#define CMD_SYS_REBOOT 101 + +//read mode +#define MODE_RD_VER 1 +#define MODE_RD_RAW 2 +#define MODE_RD_DIF 3 +#define MODE_RD_CFG 4 +#define MODE_RD_CHIP_TYPE 5 + +#if 0 +struct tpd_firmware_info_t +{ + int magic_number_1; + int magic_number_2; + unsigned short version; + unsigned short length; + unsigned short checksum; + unsigned char data; +}; +#else +#pragma pack(1) +struct tpd_firmware_info_t +{ + unsigned char chip_type; + unsigned short version; + unsigned char rom_version; + unsigned char reserved[3]; + unsigned short start_addr; + unsigned short length; + unsigned char checksum[3]; + unsigned char mandatory_flag[6]; + unsigned char data; +}; +#pragma pack() +#endif + +#define NVRAM_LEN 0x0FF0 // nvram total space +#define NVRAM_BOOT_SECTOR_LEN 0x0100 // boot sector +#define NVRAM_UPDATE_START_ADDR 0x4100 + +#define BIT_NVRAM_STROE 0 +#define BIT_NVRAM_RECALL 1 +#define BIT_NVRAM_LOCK 2 +#define REG_NVRCS_H 0X12 +#define REG_NVRCS_L 0X01 +#define GT811_SET_INT_PIN( level ) gpio_direction_output(INT_PORT, level) //null macro now +#endif +//*****************************End of Part III******************************** +/////////////////////////////// UPDATE STEP 7 END ///////////////////////////////////////////////////////////////// + +struct gt811_platform_data { + uint32_t version; /* Use this entry for panels with */ + u16 model; /* 801. */ + bool swap_xy; /* swap x and y axes */ + u16 x_min, x_max; + u16 y_min, y_max; + bool x_reverse, y_reverse; + int (*get_pendown_state)(void); + int (*init_platform_hw)(void); + int (*platform_sleep)(void); + int (*platform_wakeup)(void); + void (*exit_platform_hw)(void); + int gpio_reset; + bool gpio_reset_active_low; + + + //reservation +}; + +#define RAW_DATA_READY 1 +#define RAW_DATA_NON_ACTIVE 0xffffffff +#define RAW_DATA_ACTIVE 0 + + +enum CHIP_TYPE +{ + GT800 = 1, + GT800PLUS, + GT800PLUS3, + GT816, + GT811, + GT8105, + GT8110, + GT818PLUS +}; + + +#endif /* _LINUX_GOODIX_TOUCH_H */ diff --git a/sound/soc/codecs/rk2928_codec.c b/sound/soc/codecs/rk2928_codec.c index 8db61f6e7362..85a958cea143 100755 --- a/sound/soc/codecs/rk2928_codec.c +++ b/sound/soc/codecs/rk2928_codec.c @@ -61,7 +61,7 @@ static const struct snd_soc_dapm_widget rk2928_dapm_widgets[] = { // SND_SOC_DAPM_OUT_DRV("DACR Drv", CODEC_REG_DAC_MUTE, 0, 1, NULL, 0), SND_SOC_DAPM_OUTPUT("SPKL"), SND_SOC_DAPM_OUTPUT("SPKR"), - #ifndef CONFIG_MACH_RK2928_A720 + #ifndef CONFIG_MACH_RK2926_SDK SND_SOC_DAPM_ADC("ADCL", "HIFI Capture", CODEC_REG_POWER, 3, 1), SND_SOC_DAPM_INPUT("MICL"), #endif @@ -74,7 +74,7 @@ static const struct snd_soc_dapm_route rk2928_audio_map[] = { {"SPKR", "DACR Amp", "DACR"}, // {"SPKL", NULL, "DACL Drv"}, // {"SPKR", NULL, "DACR Drv"}, - #ifndef CONFIG_MACH_RK2928_A720 + #ifndef CONFIG_MACH_RK2926_SDK {"ADCL", NULL, "MICL"}, #endif {"ADCR", NULL, "MICR"}, -- 2.34.1