From 054531e7a5cb195140bead068b51cc6147c5c8bf Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Fri, 31 Jul 2015 00:55:23 +0300 Subject: [PATCH] ARM: shmobile: silk: add eMMC DT support Define the SILK board dependent part of the MMCIF device node (the board has eMMC chip) along with the necessary voltage regulator (note that the Vcc/Vccq regulator is dummy -- it's required by the MMCIF driver but doesn't actually exist on the board). Based on the original patch by Vladimir Barinov . Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7794-silk.dts | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts index 79bc64b94456..d4dd5a30ccdf 100644 --- a/arch/arm/boot/dts/r8a7794-silk.dts +++ b/arch/arm/boot/dts/r8a7794-silk.dts @@ -30,6 +30,15 @@ device_type = "memory"; reg = <0 0x40000000 0 0x40000000>; }; + + d3_3v: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "D3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; }; &extal_clk { @@ -51,6 +60,11 @@ renesas,groups = "intc_irq8"; renesas,function = "intc"; }; + + mmcif0_pins: mmcif0 { + renesas,groups = "mmc_data8", "mmc_ctrl"; + renesas,function = "mmc"; + }; }; &scif2 { @@ -75,3 +89,14 @@ micrel,led-mode = <1>; }; }; + +&mmcif0 { + pinctrl-0 = <&mmcif0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&d3_3v>; + vqmmc-supply = <&d3_3v>; + bus-width = <8>; + non-removable; + status = "okay"; +}; -- 2.34.1