From 245dcdb6ab85e738660d87fafce73da66ecec280 Mon Sep 17 00:00:00 2001 From: Robin Randhawa Date: Mon, 29 Jun 2015 17:56:20 +0100 Subject: [PATCH] Documentation: DT bindings for energy model cost data required by EAS EAS (energy aware scheduling) provides the scheduler with an alternative objective - energy efficiency - as opposed to it's current performance oriented objectives. EAS relies on a simple platform energy cost model to guide scheduling decisions. The model only considers the CPU subsystem. This patch adds documentation describing DT bindings that should be used to supply the scheduler with an energy cost model. Signed-off-by: Robin Randhawa --- .../bindings/scheduler/sched-energy-costs.txt | 360 ++++++++++++++++++ 1 file changed, 360 insertions(+) create mode 100644 Documentation/devicetree/bindings/scheduler/sched-energy-costs.txt diff --git a/Documentation/devicetree/bindings/scheduler/sched-energy-costs.txt b/Documentation/devicetree/bindings/scheduler/sched-energy-costs.txt new file mode 100644 index 000000000000..11216f09e596 --- /dev/null +++ b/Documentation/devicetree/bindings/scheduler/sched-energy-costs.txt @@ -0,0 +1,360 @@ +=========================================================== +Energy cost bindings for Energy Aware Scheduling +=========================================================== + +=========================================================== +1 - Introduction +=========================================================== + +This note specifies bindings required for energy-aware scheduling +(EAS)[1]. Historically, the scheduler's primary objective has been +performance. EAS aims to provide an alternative objective - energy +efficiency. EAS relies on a simple platform energy cost model to +guide scheduling decisions. The model only considers the CPU +subsystem. + +This note is aligned with the definition of the layout of physical +CPUs in the system as described in the ARM topology binding +description [2]. The concept is applicable to any system so long as +the cost model data is provided for those processing elements in +that system's topology that EAS is required to service. + +Processing elements refer to hardware threads, CPUs and clusters of +related CPUs in increasing order of hierarchy. + +EAS requires two key cost metrics - busy costs and idle costs. Busy +costs comprise of a list of compute capacities for the processing +element in question and the corresponding power consumption at that +capacity. Idle costs comprise of a list of power consumption values +for each idle state [C-state] that the processing element supports. +For a detailed description of these metrics, their derivation and +their use see [3]. + +These cost metrics are required for processing elements in all +scheduling domain levels that EAS is required to service. + +=========================================================== +2 - energy-costs node +=========================================================== + +Energy costs for the processing elements in scheduling domains that +EAS is required to service are defined in the energy-costs node +which acts as a container for the actual per processing element cost +nodes. A single energy-costs node is required for a given system. + +- energy-costs node + + Usage: Required + + Description: The energy-costs node is a container node and + it's sub-nodes describe costs for each processing element at + all scheduling domain levels that EAS is required to + service. + + Node name must be "energy-costs". + + The energy-costs node's parent node must be the cpus node. + + The energy-costs node's child nodes can be: + + - one or more cost nodes. + + Any other configuration is considered invalid. + +The energy-costs node can only contain a single type of child node +whose bindings are described in paragraph 4. + +=========================================================== +3 - energy-costs node child nodes naming convention +=========================================================== + +energy-costs child nodes must follow a naming convention where the +node name must be "thread-costN", "core-costN", "cluster-costN" +depending on whether the costs in the node are for a thread, core or +cluster. N (where N = {0, 1, ...}) is the node number and has no +bearing to the OS' logical thread, core or cluster index. + +=========================================================== +4 - cost node bindings +=========================================================== + +Bindings for cost nodes are defined as follows: + +- cluster-cost node + + Description: must be declared within an energy-costs node. A + system can contain multiple clusters and each cluster + serviced by EAS must have a corresponding cluster-costs + node. + + The cluster-cost node name must be "cluster-costN" as + described in 3 above. + + A cluster-cost node must be a leaf node with no children. + + Properties for cluster-cost nodes are described in paragraph + 5 below. + + Any other configuration is considered invalid. + +- core-cost node + + Description: must be declared within an energy-costs node. A + system can contain multiple cores and each core serviced by + EAS must have a corresponding core-cost node. + + The core-cost node name must be "core-costN" as described in + 3 above. + + A core-cost node must be a leaf node with no children. + + Properties for core-cost nodes are described in paragraph + 5 below. + + Any other configuration is considered invalid. + +- thread-cost node + + Description: must be declared within an energy-costs node. A + system can contain cores with multiple hardware threads and + each thread serviced by EAS must have a corresponding + thread-cost node. + + The core-cost node name must be "core-costN" as described in + 3 above. + + A core-cost node must be a leaf node with no children. + + Properties for thread-cost nodes are described in paragraph + 5 below. + + Any other configuration is considered invalid. + +=========================================================== +5 - Cost node properties +========================================================== + +All cost node types must have only the following properties: + +- busy-cost-data + + Usage: required + Value type: An array of 2-item tuples. Each item is of type + u32. + Definition: The first item in the tuple is the capacity + value as described in [3]. The second item in the tuple is + the energy cost value as described in [3]. + +- idle-cost-data + + Usage: required + Value type: An array of 1-item tuples. The item is of type + u32. + Definition: The item in the tuple is the energy cost value + as described in [3]. + +=========================================================== +4 - Extensions to the cpu node +=========================================================== + +The cpu node is extended with a property that establishes the +connection between the processing element represented by the cpu +node and the cost-nodes associated with this processing element. + +The connection is expressed in line with the topological hierarchy +that this processing element belongs to starting with the level in +the hierarchy that this processing element itself belongs to through +to the highest level that EAS is required to service. The +connection cannot be sparse and must be contiguous from the +processing element's level through to the highest desired level. The +highest desired level must be the same for all processing elements. + +Example: Given that a cpu node may represent a thread that is a part +of a core, this property may contain multiple elements which +associate the thread with cost nodes describing the costs for the +thread itself, the core the thread belongs to, the cluster the core +belongs to and so on. The elements must be ordered from the lowest +level nodes to the highest desired level that EAS must service. The +highest desired level must be the same for all cpu nodes. The +elements must not be sparse: there must be elements for the current +thread, the next level of hierarchy (core) and so on without any +'holes'. + +Example: Given that a cpu node may represent a core that is a part +of a cluster of related cpus this property may contain multiple +elements which associate the core with cost nodes describing the +costs for the core itself, the cluster the core belongs to and so +on. The elements must be ordered from the lowest level nodes to the +highest desired level that EAS must service. The highest desired +level must be the same for all cpu nodes. The elements must not be +sparse: there must be elements for the current thread, the next +level of hierarchy (core) and so on without any 'holes'. + +If the system comprises of hierarchical clusters of clusters, this +property will contain multiple associations with the relevant number +of cluster elements in hierarchical order. + +Property added to the cpu node: + +- sched-energy-costs + + Usage: required + Value type: List of phandles + Definition: a list of phandles to specific cost nodes in the + energy-costs parent node that correspond to the processing + element represented by this cpu node in hierarchical order + of topology. + + The order of phandles in the list is significant. The first + phandle is to the current processing element's own cost + node. Subsequent phandles are to higher hierarchical level + cost nodes up until the maximum level that EAS is to + service. + + All cpu nodes must have the same highest level cost node. + + The phandle list must not be sparsely populated with handles + to non-contiguous hierarchical levels. See commentary above + for clarity. + + Any other configuration is invalid. + +=========================================================== +5 - Example dts +=========================================================== + +Example 1 (ARM 64-bit, 6-cpu system, two clusters of cpus, one +cluster of 2 Cortex-A57 cpus, one cluster of 4 Cortex-A53 cpus): + +cpus { + #address-cells = <2>; + #size-cells = <0>; + . + . + . + A57_0: cpu@0 { + compatible = "arm,cortex-a57","arm,armv8"; + reg = <0x0 0x0>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A57_L2>; + clocks = <&scpi_dvfs 0>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + sched-energy-costs = <&CPU_COST_0 &CLUSTER_COST_0>; + }; + + A57_1: cpu@1 { + compatible = "arm,cortex-a57","arm,armv8"; + reg = <0x0 0x1>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A57_L2>; + clocks = <&scpi_dvfs 0>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + sched-energy-costs = <&CPU_COST_0 &CLUSTER_COST_0>; + }; + + A53_0: cpu@100 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x100>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + clocks = <&scpi_dvfs 1>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + sched-energy-costs = <&CPU_COST_1 &CLUSTER_COST_1>; + }; + + A53_1: cpu@101 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x101>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + clocks = <&scpi_dvfs 1>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + sched-energy-costs = <&CPU_COST_1 &CLUSTER_COST_1>; + }; + + A53_2: cpu@102 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x102>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + clocks = <&scpi_dvfs 1>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + sched-energy-costs = <&CPU_COST_1 &CLUSTER_COST_1>; + }; + + A53_3: cpu@103 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x103>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + clocks = <&scpi_dvfs 1>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + sched-energy-costs = <&CPU_COST_1 &CLUSTER_COST_1>; + }; + + energy-costs { + CPU_COST_0: core-cost0 { + busy-cost-data = < + 417 168 + 579 251 + 744 359 + 883 479 + 1024 616 + >; + idle-cost-data = < + 15 + 0 + >; + }; + CPU_COST_1: core-cost1 { + busy-cost-data = < + 235 33 + 302 46 + 368 61 + 406 76 + 447 93 + >; + idle-cost-data = < + 6 + 0 + >; + }; + CLUSTER_COST_0: cluster-cost0 { + busy-cost-data = < + 417 24 + 579 32 + 744 43 + 883 49 + 1024 64 + >; + idle-cost-data = < + 65 + 24 + >; + }; + CLUSTER_COST_1: cluster-cost1 { + busy-cost-data = < + 235 26 + 303 30 + 368 39 + 406 47 + 447 57 + >; + idle-cost-data = < + 56 + 17 + >; + }; + }; +}; + +=============================================================================== +[1] https://lkml.org/lkml/2015/5/12/728 +[2] Documentation/devicetree/bindings/topology.txt +[3] Documentation/scheduler/sched-energy.txt -- 2.34.1