From 2685a2cefe6bcd17e6b407799f41369c7dad422d Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sat, 10 Oct 2015 00:40:31 +0300 Subject: [PATCH] ARM: shmobile: porter: add QSPI DT support Define the Porter board dependent part of the QSPI device node. Add device nodes for Spansion S25FL512S SPI flash and the MTD partitions on it. This patch is mostly analogous to the commit f59838d44835 ("ARM: shmobile: henninger: add QSPI DT support") as there are no differences between the boards in this respect. Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791-porter.dts | 38 ++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index b7fa8261e02f..4eebc67773d2 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -110,6 +110,11 @@ renesas,function = "sdhi2"; }; + qspi_pins: spi0 { + renesas,groups = "qspi_ctrl", "qspi_data4"; + renesas,function = "qspi"; + }; + i2c2_pins: i2c2 { renesas,groups = "i2c2"; renesas,function = "i2c2"; @@ -165,6 +170,39 @@ status = "okay"; }; +&qspi { + pinctrl-0 = <&qspi_pins>; + pinctrl-names = "default"; + + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25fl512s", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <30000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + m25p,fast-read; + + partition@0 { + label = "loader_prg"; + reg = <0x00000000 0x00040000>; + read-only; + }; + partition@40000 { + label = "user_prg"; + reg = <0x00040000 0x00400000>; + read-only; + }; + partition@440000 { + label = "flash_fs"; + reg = <0x00440000 0x03bc0000>; + }; + }; +}; + &i2c2 { pinctrl-0 = <&i2c2_pins>; pinctrl-names = "default"; -- 2.34.1