From 2ba2866f782f7f1c38abc3dd56d3295efd289264 Mon Sep 17 00:00:00 2001 From: Balaji T K Date: Mon, 2 Dec 2013 11:38:13 -0800 Subject: [PATCH] ARM: dts: omap4-panda-common: Fix pin muxing for wl12xx pin mux wl12xx_gpio and wl12xx_pins should be part of omap4_pmx_core and not omap4_pmx_wkup. So, move wl12xx_* to omap4_pmx_core. Fix the following error message: pinctrl-single 4a31e040.pinmux: mux offset out of range: 0x38 (0x38) pinctrl-single 4a31e040.pinmux: could not add functions for pinmux_wl12xx_pins 56x SDIO card is not detected after moving pin mux to omap4_pmx_core since sdmmc5_clk pull is disabled. Enable Pull up on sdmmc5_clk to detect SDIO card. This fixes a regression where WLAN did not work after a warm reset or after one up/down cycle that happened when we move omap4 to boot using device tree only. For reference, the kernel bug is described at: https://bugzilla.kernel.org/show_bug.cgi?id=63821 Cc: stable@vger.kernel.org # v3.10+ Signed-off-by: Balaji T K [tony@atomide.com: update comments to describe the regression] Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap4-panda-common.dtsi | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 298e85020e1b..88c6a05cab41 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -246,15 +246,6 @@ 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ >; }; -}; - -&omap4_pmx_wkup { - led_wkgpio_pins: pinmux_leds_wkpins { - pinctrl-single,pins = < - 0x1a (PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */ - 0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */ - >; - }; /* * wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP @@ -274,7 +265,7 @@ pinctrl-single,pins = < 0x38 (PIN_INPUT | MUX_MODE3) /* gpmc_ncs2.gpio_52 */ 0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */ - 0x108 (PIN_OUTPUT | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */ + 0x108 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */ 0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */ 0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */ 0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */ @@ -284,6 +275,15 @@ }; }; +&omap4_pmx_wkup { + led_wkgpio_pins: pinmux_leds_wkpins { + pinctrl-single,pins = < + 0x1a (PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */ + 0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */ + >; + }; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; -- 2.34.1