From 2e5da889d44a3a9629f895de3488306e7f5ddf16 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 4 Jan 2012 01:32:34 -0800 Subject: [PATCH] [SCSI] isci: cleanup oem parameter and recipe handling Before updating the code to support the latest platform updates and silicon revision cleanup some of the long deref chains. Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/isci/host.c | 107 +++++++++++++++++---------------------- drivers/scsi/isci/phy.c | 81 ++++++++++++++--------------- 2 files changed, 86 insertions(+), 102 deletions(-) diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index e7fe9c4c85b8..8e7de192cf6d 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -1910,160 +1910,147 @@ void sci_controller_power_control_queue_remove(struct isci_host *ihost, #define AFE_REGISTER_WRITE_DELAY 10 -/* Initialize the AFE for this phy index. We need to read the AFE setup from - * the OEM parameters - */ static void sci_controller_afe_initialization(struct isci_host *ihost) { + struct scu_afe_registers __iomem *afe = &ihost->scu_registers->afe; const struct sci_oem_params *oem = &ihost->oem_parameters; struct pci_dev *pdev = ihost->pdev; u32 afe_status; u32 phy_id; /* Clear DFX Status registers */ - writel(0x0081000f, &ihost->scu_registers->afe.afe_dfx_master_control0); + writel(0x0081000f, &afe->afe_dfx_master_control0); udelay(AFE_REGISTER_WRITE_DELAY); if (is_b0(pdev)) { /* PM Rx Equalization Save, PM SPhy Rx Acknowledgement - * Timer, PM Stagger Timer */ - writel(0x0007BFFF, &ihost->scu_registers->afe.afe_pmsn_master_control2); + * Timer, PM Stagger Timer + */ + writel(0x0007BFFF, &afe->afe_pmsn_master_control2); udelay(AFE_REGISTER_WRITE_DELAY); } /* Configure bias currents to normal */ if (is_a2(pdev)) - writel(0x00005A00, &ihost->scu_registers->afe.afe_bias_control); + writel(0x00005A00, &afe->afe_bias_control); else if (is_b0(pdev) || is_c0(pdev)) - writel(0x00005F00, &ihost->scu_registers->afe.afe_bias_control); + writel(0x00005F00, &afe->afe_bias_control); udelay(AFE_REGISTER_WRITE_DELAY); /* Enable PLL */ if (is_b0(pdev) || is_c0(pdev)) - writel(0x80040A08, &ihost->scu_registers->afe.afe_pll_control0); + writel(0x80040A08, &afe->afe_pll_control0); else - writel(0x80040908, &ihost->scu_registers->afe.afe_pll_control0); + writel(0x80040908, &afe->afe_pll_control0); udelay(AFE_REGISTER_WRITE_DELAY); /* Wait for the PLL to lock */ do { - afe_status = readl(&ihost->scu_registers->afe.afe_common_block_status); + afe_status = readl(&afe->afe_common_block_status); udelay(AFE_REGISTER_WRITE_DELAY); } while ((afe_status & 0x00001000) == 0); if (is_a2(pdev)) { - /* Shorten SAS SNW lock time (RxLock timer value from 76 us to 50 us) */ - writel(0x7bcc96ad, &ihost->scu_registers->afe.afe_pmsn_master_control0); + /* Shorten SAS SNW lock time (RxLock timer value from 76 + * us to 50 us) + */ + writel(0x7bcc96ad, &afe->afe_pmsn_master_control0); udelay(AFE_REGISTER_WRITE_DELAY); } for (phy_id = 0; phy_id < SCI_MAX_PHYS; phy_id++) { + struct scu_afe_transceiver *xcvr = &afe->scu_afe_xcvr[phy_id]; const struct sci_phy_oem_params *oem_phy = &oem->phys[phy_id]; if (is_b0(pdev)) { /* Configure transmitter SSC parameters */ - writel(0x00030000, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_ssc_control); + writel(0x00030000, &xcvr->afe_tx_ssc_control); udelay(AFE_REGISTER_WRITE_DELAY); } else if (is_c0(pdev)) { /* Configure transmitter SSC parameters */ - writel(0x0003000, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_ssc_control); + writel(0x0003000, &xcvr->afe_tx_ssc_control); udelay(AFE_REGISTER_WRITE_DELAY); - /* - * All defaults, except the Receive Word Alignament/Comma Detect - * Enable....(0xe800) */ - writel(0x00004500, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0); + /* All defaults, except the Receive Word + * Alignament/Comma Detect Enable....(0xe800) + */ + writel(0x00004500, &xcvr->afe_xcvr_control0); udelay(AFE_REGISTER_WRITE_DELAY); } else { - /* - * All defaults, except the Receive Word Alignament/Comma Detect - * Enable....(0xe800) */ - writel(0x00004512, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0); + /* All defaults, except the Receive Word + * Alignament/Comma Detect Enable....(0xe800) + */ + writel(0x00004512, &xcvr->afe_xcvr_control0); udelay(AFE_REGISTER_WRITE_DELAY); - writel(0x0050100F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control1); + writel(0x0050100F, &xcvr->afe_xcvr_control1); udelay(AFE_REGISTER_WRITE_DELAY); } - /* - * Power up TX and RX out from power down (PWRDNTX and PWRDNRX) - * & increase TX int & ext bias 20%....(0xe85c) */ + /* Power up TX and RX out from power down (PWRDNTX and PWRDNRX) + * & increase TX int & ext bias 20%....(0xe85c) + */ if (is_a2(pdev)) - writel(0x000003F0, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); + writel(0x000003F0, &xcvr->afe_channel_control); else if (is_b0(pdev)) { /* Power down TX and RX (PWRDNTX and PWRDNRX) */ - writel(0x000003D7, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); + writel(0x000003D7, &xcvr->afe_channel_control); udelay(AFE_REGISTER_WRITE_DELAY); - - /* - * Power up TX and RX out from power down (PWRDNTX and PWRDNRX) - * & increase TX int & ext bias 20%....(0xe85c) */ - writel(0x000003D4, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); + writel(0x000003D4, &xcvr->afe_channel_control); } else { - writel(0x000001E7, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); + writel(0x000001E7, &xcvr->afe_channel_control); udelay(AFE_REGISTER_WRITE_DELAY); - - /* - * Power up TX and RX out from power down (PWRDNTX and PWRDNRX) - * & increase TX int & ext bias 20%....(0xe85c) */ - writel(0x000001E4, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); + writel(0x000001E4, &xcvr->afe_channel_control); } udelay(AFE_REGISTER_WRITE_DELAY); if (is_a2(pdev)) { /* Enable TX equalization (0xe824) */ - writel(0x00040000, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control); + writel(0x00040000, &xcvr->afe_tx_control); udelay(AFE_REGISTER_WRITE_DELAY); } - /* - * RDPI=0x0(RX Power On), RXOOBDETPDNC=0x0, TPD=0x0(TX Power On), - * RDD=0x0(RX Detect Enabled) ....(0xe800) */ - writel(0x00004100, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0); + writel(0x00004100, &xcvr->afe_xcvr_control0); udelay(AFE_REGISTER_WRITE_DELAY); /* Leave DFE/FFE on */ if (is_a2(pdev)) - writel(0x3F11103F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0); + writel(0x3F11103F, &xcvr->afe_rx_ssc_control0); else if (is_b0(pdev)) { - writel(0x3F11103F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0); + writel(0x3F11103F, &xcvr->afe_rx_ssc_control0); udelay(AFE_REGISTER_WRITE_DELAY); /* Enable TX equalization (0xe824) */ - writel(0x00040000, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control); + writel(0x00040000, &xcvr->afe_tx_control); } else { - writel(0x0140DF0F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control1); + writel(0x0140DF0F, &xcvr->afe_rx_ssc_control1); udelay(AFE_REGISTER_WRITE_DELAY); - writel(0x3F6F103F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0); + writel(0x3F6F103F, &xcvr->afe_rx_ssc_control0); udelay(AFE_REGISTER_WRITE_DELAY); /* Enable TX equalization (0xe824) */ - writel(0x00040000, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control); + writel(0x00040000, &xcvr->afe_tx_control); } udelay(AFE_REGISTER_WRITE_DELAY); - writel(oem_phy->afe_tx_amp_control0, - &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control0); + writel(oem_phy->afe_tx_amp_control0, &xcvr->afe_tx_amp_control0); udelay(AFE_REGISTER_WRITE_DELAY); - writel(oem_phy->afe_tx_amp_control1, - &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control1); + writel(oem_phy->afe_tx_amp_control1, &xcvr->afe_tx_amp_control1); udelay(AFE_REGISTER_WRITE_DELAY); - writel(oem_phy->afe_tx_amp_control2, - &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control2); + writel(oem_phy->afe_tx_amp_control2, &xcvr->afe_tx_amp_control2); udelay(AFE_REGISTER_WRITE_DELAY); - writel(oem_phy->afe_tx_amp_control3, - &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control3); + writel(oem_phy->afe_tx_amp_control3, &xcvr->afe_tx_amp_control3); udelay(AFE_REGISTER_WRITE_DELAY); } /* Transfer control to the PEs */ - writel(0x00010f00, &ihost->scu_registers->afe.afe_dfx_master_control0); + writel(0x00010f00, &afe->afe_dfx_master_control0); udelay(AFE_REGISTER_WRITE_DELAY); } diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c index 35f50c2183e1..0ae0990b39dd 100644 --- a/drivers/scsi/isci/phy.c +++ b/drivers/scsi/isci/phy.c @@ -91,22 +91,23 @@ sci_phy_transport_layer_initialization(struct isci_phy *iphy, static enum sci_status sci_phy_link_layer_initialization(struct isci_phy *iphy, - struct scu_link_layer_registers __iomem *reg) + struct scu_link_layer_registers __iomem *llr) { struct isci_host *ihost = iphy->owning_port->owning_controller; + struct sci_phy_user_params *phy_user; + struct sci_phy_oem_params *phy_oem; int phy_idx = iphy->phy_index; - struct sci_phy_user_params *phy_user = &ihost->user_parameters.phys[phy_idx]; - struct sci_phy_oem_params *phy_oem = - &ihost->oem_parameters.phys[phy_idx]; - u32 phy_configuration; struct sci_phy_cap phy_cap; + u32 phy_configuration; u32 parity_check = 0; u32 parity_count = 0; u32 llctl, link_rate; u32 clksm_value = 0; u32 sp_timeouts = 0; - iphy->link_layer_registers = reg; + phy_user = &ihost->user_parameters.phys[phy_idx]; + phy_oem = &ihost->oem_parameters.phys[phy_idx]; + iphy->link_layer_registers = llr; /* Set our IDENTIFY frame data */ #define SCI_END_DEVICE 0x01 @@ -116,32 +117,26 @@ sci_phy_link_layer_initialization(struct isci_phy *iphy, SCU_SAS_TIID_GEN_BIT(STP_INITIATOR) | SCU_SAS_TIID_GEN_BIT(DA_SATA_HOST) | SCU_SAS_TIID_GEN_VAL(DEVICE_TYPE, SCI_END_DEVICE), - &iphy->link_layer_registers->transmit_identification); + &llr->transmit_identification); /* Write the device SAS Address */ - writel(0xFEDCBA98, - &iphy->link_layer_registers->sas_device_name_high); - writel(phy_idx, &iphy->link_layer_registers->sas_device_name_low); + writel(0xFEDCBA98, &llr->sas_device_name_high); + writel(phy_idx, &llr->sas_device_name_low); /* Write the source SAS Address */ - writel(phy_oem->sas_address.high, - &iphy->link_layer_registers->source_sas_address_high); - writel(phy_oem->sas_address.low, - &iphy->link_layer_registers->source_sas_address_low); + writel(phy_oem->sas_address.high, &llr->source_sas_address_high); + writel(phy_oem->sas_address.low, &llr->source_sas_address_low); /* Clear and Set the PHY Identifier */ - writel(0, &iphy->link_layer_registers->identify_frame_phy_id); - writel(SCU_SAS_TIPID_GEN_VALUE(ID, phy_idx), - &iphy->link_layer_registers->identify_frame_phy_id); + writel(0, &llr->identify_frame_phy_id); + writel(SCU_SAS_TIPID_GEN_VALUE(ID, phy_idx), &llr->identify_frame_phy_id); /* Change the initial state of the phy configuration register */ - phy_configuration = - readl(&iphy->link_layer_registers->phy_configuration); + phy_configuration = readl(&llr->phy_configuration); /* Hold OOB state machine in reset */ phy_configuration |= SCU_SAS_PCFG_GEN_BIT(OOB_RESET); - writel(phy_configuration, - &iphy->link_layer_registers->phy_configuration); + writel(phy_configuration, &llr->phy_configuration); /* Configure the SNW capabilities */ phy_cap.all = 0; @@ -155,9 +150,9 @@ sci_phy_link_layer_initialization(struct isci_phy *iphy, phy_cap.gen1_ssc = 1; } - /* - * The SAS specification indicates that the phy_capabilities that - * are transmitted shall have an even parity. Calculate the parity. */ + /* The SAS specification indicates that the phy_capabilities that + * are transmitted shall have an even parity. Calculate the parity. + */ parity_check = phy_cap.all; while (parity_check != 0) { if (parity_check & 0x1) @@ -165,20 +160,20 @@ sci_phy_link_layer_initialization(struct isci_phy *iphy, parity_check >>= 1; } - /* - * If parity indicates there are an odd number of bits set, then - * set the parity bit to 1 in the phy capabilities. */ + /* If parity indicates there are an odd number of bits set, then + * set the parity bit to 1 in the phy capabilities. + */ if ((parity_count % 2) != 0) phy_cap.parity = 1; - writel(phy_cap.all, &iphy->link_layer_registers->phy_capabilities); + writel(phy_cap.all, &llr->phy_capabilities); /* Set the enable spinup period but disable the ability to send * notify enable spinup */ writel(SCU_ENSPINUP_GEN_VAL(COUNT, phy_user->notify_enable_spin_up_insertion_frequency), - &iphy->link_layer_registers->notify_enable_spinup_control); + &llr->notify_enable_spinup_control); /* Write the ALIGN Insertion Ferequency for connected phy and * inpendent of connected state @@ -189,11 +184,10 @@ sci_phy_link_layer_initialization(struct isci_phy *iphy, clksm_value |= SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(GENERAL, phy_user->align_insertion_frequency); - writel(clksm_value, &iphy->link_layer_registers->clock_skew_management); + writel(clksm_value, &llr->clock_skew_management); /* @todo Provide a way to write this register correctly */ - writel(0x02108421, - &iphy->link_layer_registers->afe_lookup_table_control); + writel(0x02108421, &llr->afe_lookup_table_control); llctl = SCU_SAS_LLCTL_GEN_VAL(NO_OUTBOUND_TASK_TIMEOUT, (u8)ihost->user_parameters.no_outbound_task_timeout); @@ -210,9 +204,9 @@ sci_phy_link_layer_initialization(struct isci_phy *iphy, break; } llctl |= SCU_SAS_LLCTL_GEN_VAL(MAX_LINK_RATE, link_rate); - writel(llctl, &iphy->link_layer_registers->link_layer_control); + writel(llctl, &llr->link_layer_control); - sp_timeouts = readl(&iphy->link_layer_registers->sas_phy_timeouts); + sp_timeouts = readl(&llr->sas_phy_timeouts); /* Clear the default 0x36 (54us) RATE_CHANGE timeout value. */ sp_timeouts &= ~SCU_SAS_PHYTOV_GEN_VAL(RATE_CHANGE, 0xFF); @@ -222,20 +216,23 @@ sci_phy_link_layer_initialization(struct isci_phy *iphy, */ sp_timeouts |= SCU_SAS_PHYTOV_GEN_VAL(RATE_CHANGE, 0x3B); - writel(sp_timeouts, &iphy->link_layer_registers->sas_phy_timeouts); + writel(sp_timeouts, &llr->sas_phy_timeouts); if (is_a2(ihost->pdev)) { - /* Program the max ARB time for the PHY to 700us so we inter-operate with - * the PMC expander which shuts down PHYs if the expander PHY generates too - * many breaks. This time value will guarantee that the initiator PHY will - * generate the break. + /* Program the max ARB time for the PHY to 700us so we + * inter-operate with the PMC expander which shuts down + * PHYs if the expander PHY generates too many breaks. + * This time value will guarantee that the initiator PHY + * will generate the break. */ writel(SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME, - &iphy->link_layer_registers->maximum_arbitration_wait_timer_timeout); + &llr->maximum_arbitration_wait_timer_timeout); } - /* Disable link layer hang detection, rely on the OS timeout for I/O timeouts. */ - writel(0, &iphy->link_layer_registers->link_layer_hang_detection_timeout); + /* Disable link layer hang detection, rely on the OS timeout for + * I/O timeouts. + */ + writel(0, &llr->link_layer_hang_detection_timeout); /* We can exit the initial state to the stopped state */ sci_change_state(&iphy->sm, SCI_PHY_STOPPED); -- 2.34.1