From 3c3f42d63a11f2e22dbff6bb4d170f92dbd39316 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Mon, 10 Oct 2005 22:58:41 +1000 Subject: [PATCH] powerpc: Start merging 64-bit support into powermac files Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/powermac/pci.c | 194 +++++++++++------------- arch/powerpc/platforms/powermac/pic.c | 32 ++-- arch/powerpc/platforms/powermac/pmac.h | 25 ++- arch/powerpc/platforms/powermac/setup.c | 20 +-- 4 files changed, 128 insertions(+), 143 deletions(-) diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c index 40bcd3e55afb..afb147e6b89f 100644 --- a/arch/powerpc/platforms/powermac/pci.c +++ b/arch/powerpc/platforms/powermac/pci.c @@ -1,8 +1,5 @@ /* * Support for PCI bridges found on Power Macintoshes. - * At present the "bandit" and "chaos" bridges are supported. - * Fortunately you access configuration space in the same - * way with either bridge. * * Copyright (C) 2003 Benjamin Herrenschmuidt (benh@kernel.crashing.org) * Copyright (C) 1997 Paul Mackerras (paulus@samba.org) @@ -26,6 +23,10 @@ #include #include #include +#ifdef CONFIG_PPC64 +#include +#include +#endif #undef DEBUG @@ -160,9 +161,13 @@ static unsigned long macrisc_cfg_access(struct pci_controller* hose, static int macrisc_read_config(struct pci_bus *bus, unsigned int devfn, int offset, int len, u32 *val) { - struct pci_controller *hose = bus->sysdata; + struct pci_controller *hose; unsigned long addr; + hose = pci_bus_to_host(bus); + if (hose == NULL) + return PCIBIOS_DEVICE_NOT_FOUND; + addr = macrisc_cfg_access(hose, bus->number, devfn, offset); if (!addr) return PCIBIOS_DEVICE_NOT_FOUND; @@ -187,9 +192,13 @@ static int macrisc_read_config(struct pci_bus *bus, unsigned int devfn, static int macrisc_write_config(struct pci_bus *bus, unsigned int devfn, int offset, int len, u32 val) { - struct pci_controller *hose = bus->sysdata; + struct pci_controller *hose; unsigned long addr; + hose = pci_bus_to_host(bus); + if (hose == NULL) + return PCIBIOS_DEVICE_NOT_FOUND; + addr = macrisc_cfg_access(hose, bus->number, devfn, offset); if (!addr) return PCIBIOS_DEVICE_NOT_FOUND; @@ -221,7 +230,7 @@ static struct pci_ops macrisc_pci_ops = }; /* - * Verifiy that a specific (bus, dev_fn) exists on chaos + * Verify that a specific (bus, dev_fn) exists on chaos */ static int chaos_validate_dev(struct pci_bus *bus, int devfn, int offset) @@ -274,7 +283,6 @@ static struct pci_ops chaos_pci_ops = }; #ifdef CONFIG_POWER4 - /* * These versions of U3 HyperTransport config space access ops do not * implement self-view of the HT host yet @@ -342,11 +350,11 @@ static unsigned long u3_ht_cfg_access(struct pci_controller* hose, static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn, int offset, int len, u32 *val) { - struct pci_controller *hose = bus->sysdata; + struct pci_controller *hose; unsigned long addr; - struct device_node *np = pci_busdev_to_OF_node(bus, devfn); - if (np == NULL) + hose = pci_bus_to_host(bus); + if (hose == NULL) return PCIBIOS_DEVICE_NOT_FOUND; addr = u3_ht_cfg_access(hose, bus->number, devfn, offset); @@ -357,19 +365,19 @@ static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn, case 0: break; case 1: - switch (len) { - case 1: - *val = 0xff; break; - case 2: - *val = 0xffff; break; - default: - *val = 0xfffffffful; break; - } - return PCIBIOS_SUCCESSFUL; + switch (len) { + case 1: + *val = 0xff; break; + case 2: + *val = 0xffff; break; + default: + *val = 0xfffffffful; break; + } + return PCIBIOS_SUCCESSFUL; default: return PCIBIOS_DEVICE_NOT_FOUND; - } - + } + /* * Note: the caller has already checked that offset is * suitably aligned and that len is 1, 2 or 4. @@ -391,11 +399,11 @@ static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn, static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn, int offset, int len, u32 val) { - struct pci_controller *hose = bus->sysdata; + struct pci_controller *hose; unsigned long addr; - struct device_node *np = pci_busdev_to_OF_node(bus, devfn); - if (np == NULL) + hose = pci_bus_to_host(bus); + if (hose == NULL) return PCIBIOS_DEVICE_NOT_FOUND; addr = u3_ht_cfg_access(hose, bus->number, devfn, offset); @@ -437,15 +445,13 @@ static struct pci_ops u3_ht_pci_ops = u3_ht_read_config, u3_ht_write_config }; - #endif /* CONFIG_POWER4 */ /* * For a bandit bridge, turn on cache coherency if necessary. * N.B. we could clean this up using the hose ops directly. */ -static void __init -init_bandit(struct pci_controller *bp) +static void __init init_bandit(struct pci_controller *bp) { unsigned int vendev, magic; int rev; @@ -485,8 +491,7 @@ init_bandit(struct pci_controller *bp) /* * Tweak the PCI-PCI bridge chip on the blue & white G3s. */ -static void __init -init_p2pbridge(void) +static void __init init_p2pbridge(void) { struct device_node *p2pbridge; struct pci_controller* hose; @@ -526,8 +531,7 @@ init_p2pbridge(void) * EHCI part of it so it behaves like a pair of OHCI's. This fixup * code re-enables it ;) */ -static void __init -fixup_nec_usb2(void) +static void __init fixup_nec_usb2(void) { struct device_node *nec; @@ -567,77 +571,6 @@ fixup_nec_usb2(void) } } -void __init -pmac_find_bridges(void) -{ - struct device_node *np, *root; - struct device_node *ht = NULL; - - root = of_find_node_by_path("/"); - if (root == NULL) { - printk(KERN_CRIT "pmac_find_bridges: can't find root of device tree\n"); - return; - } - for (np = NULL; (np = of_get_next_child(root, np)) != NULL;) { - if (np->name == NULL) - continue; - if (strcmp(np->name, "bandit") == 0 - || strcmp(np->name, "chaos") == 0 - || strcmp(np->name, "pci") == 0) { - if (add_bridge(np) == 0) - of_node_get(np); - } - if (strcmp(np->name, "ht") == 0) { - of_node_get(np); - ht = np; - } - } - of_node_put(root); - - /* Probe HT last as it relies on the agp resources to be already - * setup - */ - if (ht && add_bridge(ht) != 0) - of_node_put(ht); - - init_p2pbridge(); - fixup_nec_usb2(); - - /* We are still having some issues with the Xserve G4, enabling - * some offset between bus number and domains for now when we - * assign all busses should help for now - */ - if (pci_assign_all_busses) - pcibios_assign_bus_offset = 0x10; - -#ifdef CONFIG_POWER4 - /* There is something wrong with DMA on U3/HT. I haven't figured out - * the details yet, but if I set the cache line size to 128 bytes like - * it should, I'm getting memory corruption caused by devices like - * sungem (even without the MWI bit set, but maybe sungem doesn't - * care). Right now, it appears that setting up a 64 bytes line size - * works properly, 64 bytes beeing the max transfer size of HT, I - * suppose this is related the way HT/PCI are hooked together. I still - * need to dive into more specs though to be really sure of what's - * going on. --BenH. - * - * Ok, apparently, it's just that HT can't do more than 64 bytes - * transactions. MWI seem to be meaningless there as well, it may - * be worth nop'ing out pci_set_mwi too though I haven't done that - * yet. - * - * Note that it's a bit different for whatever is in the AGP slot. - * For now, I don't care, but this can become a real issue, we - * should probably hook pci_set_mwi anyway to make sure it sets - * the real cache line size in there. - */ - if (machine_is_compatible("MacRISC4")) - pci_cache_line_size = 16; /* 64 bytes */ - - pmac_check_ht_link(); -#endif /* CONFIG_POWER4 */ -} - #define GRACKLE_CFA(b, d, o) (0x80 | ((b) << 8) | ((d) << 16) \ | (((o) & ~3) << 24)) @@ -703,7 +636,6 @@ setup_chaos(struct pci_controller* hose, struct reg_property* addr) } #ifdef CONFIG_POWER4 - static void __init setup_u3_agp(struct pci_controller* hose) { /* On G5, we move AGP up to high bus number so we don't need @@ -715,7 +647,7 @@ static void __init setup_u3_agp(struct pci_controller* hose) * the reg address cell, we shall fix that by killing struct * reg_property and using some accessor functions instead */ - hose->first_busno = 0xf0; + hose->first_busno = 0xf0; hose->last_busno = 0xff; has_uninorth = 1; hose->ops = ¯isc_pci_ops; @@ -748,7 +680,7 @@ static void __init setup_u3_ht(struct pci_controller* hose) */ hose->io_base_phys = 0xf4000000; hose->io_base_virt = ioremap(hose->io_base_phys, 0x00400000); - isa_io_base = (unsigned long) hose->io_base_virt; + isa_io_base = pci_io_base = (unsigned long) hose->io_base_virt; hose->io_resource.name = np->full_name; hose->io_resource.start = 0; hose->io_resource.end = 0x003fffff; @@ -794,13 +726,13 @@ static void __init setup_u3_ht(struct pci_controller* hose) } /* No, it's not the case, we need a hole */ if (cur == 2) { - /* not enough resources to make a hole, we drop part of the range */ + /* not enough resources for a hole, we drop part of the range */ printk(KERN_WARNING "Running out of resources for /ht host !\n"); hose->mem_resources[cur].end = res->start - 1; continue; } cur++; - DBG("U3/HT: hole, %d end at %08lx, %d start at %08lx\n", + DBG("U3/HT: hole, %d end at %08lx, %d start at %08lx\n", cur-1, res->start - 1, cur, res->end + 1); hose->mem_resources[cur].name = np->full_name; hose->mem_resources[cur].flags = IORESOURCE_MEM; @@ -981,7 +913,7 @@ static int __init add_bridge(struct device_node *dev) if (device_is_compatible(dev, "uni-north")) { primary = setup_uninorth(hose, addr); disp_name = "UniNorth"; - } else if (strcmp(dev->name, "pci") == 0) { + } else if (strcmp(dev->name, "pci") == 0) { /* XXX assume this is a mpc106 (grackle) */ setup_grackle(hose); disp_name = "Grackle (MPC106)"; @@ -993,7 +925,7 @@ static int __init add_bridge(struct device_node *dev) disp_name = "Chaos"; primary = 0; } - printk(KERN_INFO "Found %s PCI host bridge at 0x%08x. Firmware bus number: %d->%d\n", + printk(KERN_INFO "Found %s PCI host bridge at 0x%08lx. Firmware bus number: %d->%d\n", disp_name, addr->address, hose->first_busno, hose->last_busno); DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n", hose, hose->cfg_addr, hose->cfg_data); @@ -1036,6 +968,50 @@ pmac_pcibios_fixup(void) pcibios_fixup_OF_interrupts(); } +void __init pmac_find_bridges(void) +{ + struct device_node *np, *root; + struct device_node *ht = NULL; + + root = of_find_node_by_path("/"); + if (root == NULL) { + printk(KERN_CRIT "pmac_find_bridges: can't find root of device tree\n"); + return; + } + for (np = NULL; (np = of_get_next_child(root, np)) != NULL;) { + if (np->name == NULL) + continue; + if (strcmp(np->name, "bandit") == 0 + || strcmp(np->name, "chaos") == 0 + || strcmp(np->name, "pci") == 0) { + if (add_bridge(np) == 0) + of_node_get(np); + } + if (strcmp(np->name, "ht") == 0) { + of_node_get(np); + ht = np; + } + } + of_node_put(root); + + /* Probe HT last as it relies on the agp resources to be already + * setup + */ + if (ht && add_bridge(ht) != 0) + of_node_put(ht); + + init_p2pbridge(); + fixup_nec_usb2(); + + /* We are still having some issues with the Xserve G4, enabling + * some offset between bus number and domains for now when we + * assign all busses should help for now + */ + if (pci_assign_all_busses) + pcibios_assign_bus_offset = 0x10; + +} + int pmac_pci_enable_device_hook(struct pci_dev *dev, int initial) { diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c index 7ddd5264cc6e..682fe8b6e025 100644 --- a/arch/powerpc/platforms/powermac/pic.c +++ b/arch/powerpc/platforms/powermac/pic.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include @@ -32,12 +33,11 @@ #include #include #include -#include #include #include #include -#include "pmac_pic.h" +#include "pmac.h" /* * XXX this should be in xmon.h, but putting it there means xmon.h @@ -46,6 +46,7 @@ */ extern irqreturn_t xmon_irq(int, void *, struct pt_regs *); +#ifdef CONFIG_PPC32 struct pmac_irq_hw { unsigned int event; unsigned int enable; @@ -71,6 +72,9 @@ static u32 level_mask[4]; static DEFINE_SPINLOCK(pmac_pic_lock); +/* XXX here for now, should move to arch/powerpc/kernel/irq.c */ +int ppc_do_canonicalize_irqs; +EXPORT_SYMBOL(ppc_do_canonicalize_irqs); #define GATWICK_IRQ_POOL_SIZE 10 static struct interrupt_info gatwick_int_pool[GATWICK_IRQ_POOL_SIZE]; @@ -377,11 +381,6 @@ static int __init enable_second_ohare(void) return irqctrler->intrs[0].line; } -static int pmac_u3_cascade(struct pt_regs *regs, void *data) -{ - return mpic_get_one_irq((struct mpic *)data, regs); -} - #ifdef CONFIG_XMON static struct irqaction xmon_action = { .handler = xmon_irq, @@ -397,15 +396,23 @@ static struct irqaction gatwick_cascade_action = { .mask = CPU_MASK_NONE, .name = "cascade", }; +#endif /* CONFIG_PPC32 */ + +static int pmac_u3_cascade(struct pt_regs *regs, void *data) +{ + return mpic_get_one_irq((struct mpic *)data, regs); +} void __init pmac_pic_init(void) { - int i; struct device_node *irqctrler = NULL; struct device_node *irqctrler2 = NULL; struct device_node *np; +#ifdef CONFIG_PPC32 + int i; unsigned long addr; int irq_cascade = -1; +#endif struct mpic *mpic1, *mpic2; /* We first try to detect Apple's new Core99 chipset, since mac-io @@ -455,7 +462,7 @@ void __init pmac_pic_init(void) mpic_setup_cascade(irqctrler2->intrs[0].line, pmac_u3_cascade, mpic2); } -#ifdef CONFIG_XMON +#if defined(CONFIG_XMON) && defined(CONFIG_PPC32) { struct device_node* pswitch; int nmi_irq; @@ -463,7 +470,7 @@ void __init pmac_pic_init(void) pswitch = find_devices("programmer-switch"); if (pswitch && pswitch->n_intrs) { nmi_irq = pswitch->intrs[0].line; - openpic_init_nmi_irq(nmi_irq); + mpic_irq_set_priority(nmi_irq, 9); setup_irq(nmi_irq, &xmon_action); } } @@ -472,6 +479,7 @@ void __init pmac_pic_init(void) } irqctrler = NULL; +#ifdef CONFIG_PPC32 /* Get the level/edge settings, assume if it's not * a Grand Central nor an OHare, then it's an Heathrow * (or Paddington). @@ -570,6 +578,7 @@ void __init pmac_pic_init(void) #ifdef CONFIG_XMON setup_irq(20, &xmon_action); #endif /* CONFIG_XMON */ +#endif /* CONFIG_PPC32 */ } #ifdef CONFIG_PM @@ -659,9 +668,10 @@ static struct sysdev_driver driver_pmacpic = { static int __init init_pmacpic_sysfs(void) { +#ifdef CONFIG_PPC32 if (max_irqs == 0) return -ENODEV; - +#endif printk(KERN_DEBUG "Registering pmac pic with sysfs...\n"); sysdev_class_register(&pmacpic_sysclass); sysdev_register(&device_pmacpic); diff --git a/arch/powerpc/platforms/powermac/pmac.h b/arch/powerpc/platforms/powermac/pmac.h index 40e1c5030f74..81f52512b046 100644 --- a/arch/powerpc/platforms/powermac/pmac.h +++ b/arch/powerpc/platforms/powermac/pmac.h @@ -3,19 +3,31 @@ #include #include +#include /* * Declaration for the various functions exported by the * pmac_* files. Mostly for use by pmac_setup */ -extern void pmac_get_boot_time(struct rtc_time *tm); -extern void pmac_get_rtc_time(struct rtc_time *tm); -extern int pmac_set_rtc_time(struct rtc_time *tm); +extern long pmac_time_init(void); +extern unsigned long pmac_get_rtc_time(void); +extern int pmac_set_rtc_time(unsigned long nowtime); extern void pmac_read_rtc_time(void); extern void pmac_calibrate_decr(void); - extern void pmac_pcibios_fixup(void); +extern void pmac_find_bridges(void); +extern unsigned long pmac_ide_get_base(int index); +extern void pmac_ide_init_hwif_ports(hw_regs_t *hw, + unsigned long data_port, unsigned long ctrl_port, int *irq); + +extern void pmac_nvram_update(void); +extern unsigned char pmac_nvram_read_byte(int addr); +extern void pmac_nvram_write_byte(int addr, unsigned char val); +extern int pmac_pci_enable_device_hook(struct pci_dev *dev, int initial); +extern void pmac_pcibios_after_init(void); +extern int of_show_percpuinfo(struct seq_file *m, int i); + extern void pmac_pci_init(void); extern void pmac_setup_pci_dma(void); extern void pmac_check_ht_link(void); @@ -28,4 +40,9 @@ extern void pmac_ide_init_hwif_ports(hw_regs_t *hw, extern void pmac_nvram_init(void); +extern struct hw_interrupt_type pmac_pic; + +void pmac_pic_init(void); +int pmac_get_irq(struct pt_regs *regs); + #endif /* __PMAC_H__ */ diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c index 1b12bf9956cb..9416fcaa6daa 100644 --- a/arch/powerpc/platforms/powermac/setup.c +++ b/arch/powerpc/platforms/powermac/setup.c @@ -73,28 +73,10 @@ #include #include -#include "pmac_pic.h" +#include "pmac.h" #undef SHOW_GATWICK_IRQS -extern long pmac_time_init(void); -extern unsigned long pmac_get_rtc_time(void); -extern int pmac_set_rtc_time(unsigned long nowtime); -extern void pmac_read_rtc_time(void); -extern void pmac_calibrate_decr(void); -extern void pmac_pcibios_fixup(void); -extern void pmac_find_bridges(void); -extern unsigned long pmac_ide_get_base(int index); -extern void pmac_ide_init_hwif_ports(hw_regs_t *hw, - unsigned long data_port, unsigned long ctrl_port, int *irq); - -extern void pmac_nvram_update(void); -extern unsigned char pmac_nvram_read_byte(int addr); -extern void pmac_nvram_write_byte(int addr, unsigned char val); -extern int pmac_pci_enable_device_hook(struct pci_dev *dev, int initial); -extern void pmac_pcibios_after_init(void); -extern int of_show_percpuinfo(struct seq_file *m, int i); - unsigned char drive_info; int ppc_override_l2cr = 0; -- 2.34.1