From 3dfe41a4c705223c66373968327407e11c2fb1a1 Mon Sep 17 00:00:00 2001 From: Josh Wu Date: Mon, 25 Jun 2012 18:07:43 +0800 Subject: [PATCH] mtd: at91: extract hw ecc initialization to one function This patch moves hw ecc initialization code to one function. Signed-off-by: Hong Xu Signed-off-by: Josh Wu Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/atmel_nand.c | 127 ++++++++++++++++++---------------- 1 file changed, 66 insertions(+), 61 deletions(-) diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index 97ac6712bb19..7a41a04beb87 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -527,6 +527,66 @@ static int __devinit atmel_of_init_port(struct atmel_nand_host *host, } #endif +static int __init atmel_hw_nand_init_params(struct platform_device *pdev, + struct atmel_nand_host *host) +{ + struct mtd_info *mtd = &host->mtd; + struct nand_chip *nand_chip = &host->nand_chip; + struct resource *regs; + + regs = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!regs) { + dev_err(host->dev, + "Can't get I/O resource regs, use software ECC\n"); + nand_chip->ecc.mode = NAND_ECC_SOFT; + return 0; + } + + host->ecc = ioremap(regs->start, resource_size(regs)); + if (host->ecc == NULL) { + dev_err(host->dev, "ioremap failed\n"); + return -EIO; + } + + /* ECC is calculated for the whole page (1 step) */ + nand_chip->ecc.size = mtd->writesize; + + /* set ECC page size and oob layout */ + switch (mtd->writesize) { + case 512: + nand_chip->ecc.layout = &atmel_oobinfo_small; + ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_528); + break; + case 1024: + nand_chip->ecc.layout = &atmel_oobinfo_large; + ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_1056); + break; + case 2048: + nand_chip->ecc.layout = &atmel_oobinfo_large; + ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_2112); + break; + case 4096: + nand_chip->ecc.layout = &atmel_oobinfo_large; + ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_4224); + break; + default: + /* page size not handled by HW ECC */ + /* switching back to soft ECC */ + nand_chip->ecc.mode = NAND_ECC_SOFT; + return 0; + } + + /* set up for HW ECC */ + nand_chip->ecc.calculate = atmel_nand_calculate; + nand_chip->ecc.correct = atmel_nand_correct; + nand_chip->ecc.hwctl = atmel_nand_hwctl; + nand_chip->ecc.read_page = atmel_nand_read_page; + nand_chip->ecc.bytes = 4; + nand_chip->ecc.strength = 1; + + return 0; +} + /* * Probe for the NAND device. */ @@ -535,7 +595,6 @@ static int __init atmel_nand_probe(struct platform_device *pdev) struct atmel_nand_host *host; struct mtd_info *mtd; struct nand_chip *nand_chip; - struct resource *regs; struct resource *mem; struct mtd_part_parser_data ppdata = {}; int res; @@ -587,29 +646,6 @@ static int __init atmel_nand_probe(struct platform_device *pdev) nand_chip->dev_ready = atmel_nand_device_ready; nand_chip->ecc.mode = host->board.ecc_mode; - - regs = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (!regs && nand_chip->ecc.mode == NAND_ECC_HW) { - printk(KERN_ERR "atmel_nand: can't get I/O resource " - "regs\nFalling back on software ECC\n"); - nand_chip->ecc.mode = NAND_ECC_SOFT; - } - - if (nand_chip->ecc.mode == NAND_ECC_HW) { - host->ecc = ioremap(regs->start, resource_size(regs)); - if (host->ecc == NULL) { - printk(KERN_ERR "atmel_nand: ioremap failed\n"); - res = -EIO; - goto err_ecc_ioremap; - } - nand_chip->ecc.calculate = atmel_nand_calculate; - nand_chip->ecc.correct = atmel_nand_correct; - nand_chip->ecc.hwctl = atmel_nand_hwctl; - nand_chip->ecc.read_page = atmel_nand_read_page; - nand_chip->ecc.bytes = 4; - nand_chip->ecc.strength = 1; - } - nand_chip->chip_delay = 20; /* 20us command delay time */ if (host->board.bus_width_16) /* 16-bit bus width */ @@ -661,40 +697,9 @@ static int __init atmel_nand_probe(struct platform_device *pdev) } if (nand_chip->ecc.mode == NAND_ECC_HW) { - /* ECC is calculated for the whole page (1 step) */ - nand_chip->ecc.size = mtd->writesize; - - /* set ECC page size and oob layout */ - switch (mtd->writesize) { - case 512: - nand_chip->ecc.layout = &atmel_oobinfo_small; - ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_528); - break; - case 1024: - nand_chip->ecc.layout = &atmel_oobinfo_large; - ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_1056); - break; - case 2048: - nand_chip->ecc.layout = &atmel_oobinfo_large; - ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_2112); - break; - case 4096: - nand_chip->ecc.layout = &atmel_oobinfo_large; - ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_4224); - break; - default: - /* page size not handled by HW ECC */ - /* switching back to soft ECC */ - nand_chip->ecc.mode = NAND_ECC_SOFT; - nand_chip->ecc.calculate = NULL; - nand_chip->ecc.correct = NULL; - nand_chip->ecc.hwctl = NULL; - nand_chip->ecc.read_page = NULL; - nand_chip->ecc.postpad = 0; - nand_chip->ecc.prepad = 0; - nand_chip->ecc.bytes = 0; - break; - } + res = atmel_hw_nand_init_params(pdev, host); + if (res != 0) + goto err_hw_ecc; } /* second phase scan */ @@ -711,15 +716,15 @@ static int __init atmel_nand_probe(struct platform_device *pdev) return res; err_scan_tail: + if (host->ecc) + iounmap(host->ecc); +err_hw_ecc: err_scan_ident: err_no_card: atmel_nand_disable(host); platform_set_drvdata(pdev, NULL); if (host->dma_chan) dma_release_channel(host->dma_chan); - if (host->ecc) - iounmap(host->ecc); -err_ecc_ioremap: iounmap(host->io_base); err_nand_ioremap: kfree(host); -- 2.34.1