From 4da6a1d8f56f01f6526f151c2c61059fc656ec80 Mon Sep 17 00:00:00 2001 From: Michal Dobes Date: Tue, 17 Feb 2009 16:21:06 -0800 Subject: [PATCH] Staging: comedi: add pcl818 driver For Advantech cards: PCL-818L, PCL-818H, PCL-818HD, PCL-818HG, PCL-818, PCL-718 From: Michal Dobes Cc: David Schleef Cc: Frank Mori Hess Cc: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/pcl818.c | 1984 +++++++++++++++++++++++ 1 file changed, 1984 insertions(+) create mode 100644 drivers/staging/comedi/drivers/pcl818.c diff --git a/drivers/staging/comedi/drivers/pcl818.c b/drivers/staging/comedi/drivers/pcl818.c new file mode 100644 index 000000000000..9e648c3cc12e --- /dev/null +++ b/drivers/staging/comedi/drivers/pcl818.c @@ -0,0 +1,1984 @@ +/* + comedi/drivers/pcl818.c + + Author: Michal Dobes + + hardware driver for Advantech cards: + card: PCL-818L, PCL-818H, PCL-818HD, PCL-818HG, PCL-818, PCL-718 + driver: pcl818l, pcl818h, pcl818hd, pcl818hg, pcl818, pcl718 +*/ +/* +Driver: pcl818 +Description: Advantech PCL-818 cards, PCL-718 +Author: Michal Dobes +Devices: [Advantech] PCL-818L (pcl818l), PCL-818H (pcl818h), + PCL-818HD (pcl818hd), PCL-818HG (pcl818hg), PCL-818 (pcl818), + PCL-718 (pcl718) +Status: works + +All cards have 16 SE/8 DIFF ADCs, one or two DACs, 16 DI and 16 DO. +Differences are only at maximal sample speed, range list and FIFO +support. +The driver support AI mode 0, 1, 3 other subdevices (AO, DI, DO) support +only mode 0. If DMA/FIFO/INT are disabled then AI support only mode 0. +PCL-818HD and PCL-818HG support 1kword FIFO. Driver support this FIFO +but this code is untested. +A word or two about DMA. Driver support DMA operations at two ways: +1) DMA uses two buffers and after one is filled then is generated + INT and DMA restart with second buffer. With this mode I'm unable run + more that 80Ksamples/secs without data dropouts on K6/233. +2) DMA uses one buffer and run in autoinit mode and the data are + from DMA buffer moved on the fly with 2kHz interrupts from RTC. + This mode is used if the interrupt 8 is available for allocation. + If not, then first DMA mode is used. With this I can run at + full speed one card (100ksamples/secs) or two cards with + 60ksamples/secs each (more is problem on account of ISA limitations). + To use this mode you must have compiled kernel with disabled + "Enhanced Real Time Clock Support". + Maybe you can have problems if you use xntpd or similar. + If you've data dropouts with DMA mode 2 then: + a) disable IDE DMA + b) switch text mode console to fb. + + Options for PCL-818L: + [0] - IO Base + [1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7) + [2] - DMA (0=disable, 1, 3) + [3] - 0, 10=10MHz clock for 8254 + 1= 1MHz clock for 8254 + [4] - 0, 5=A/D input -5V.. +5V + 1, 10=A/D input -10V..+10V + [5] - 0, 5=D/A output 0-5V (internal reference -5V) + 1, 10=D/A output 0-10V (internal reference -10V) + 2 =D/A output unknow (external reference) + + Options for PCL-818, PCL-818H: + [0] - IO Base + [1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7) + [2] - DMA (0=disable, 1, 3) + [3] - 0, 10=10MHz clock for 8254 + 1= 1MHz clock for 8254 + [4] - 0, 5=D/A output 0-5V (internal reference -5V) + 1, 10=D/A output 0-10V (internal reference -10V) + 2 =D/A output unknow (external reference) + + Options for PCL-818HD, PCL-818HG: + [0] - IO Base + [1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7) + [2] - DMA/FIFO (-1=use FIFO, 0=disable both FIFO and DMA, + 1=use DMA ch 1, 3=use DMA ch 3) + [3] - 0, 10=10MHz clock for 8254 + 1= 1MHz clock for 8254 + [4] - 0, 5=D/A output 0-5V (internal reference -5V) + 1, 10=D/A output 0-10V (internal reference -10V) + 2 =D/A output unknow (external reference) + + Options for PCL-718: + [0] - IO Base + [1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7) + [2] - DMA (0=disable, 1, 3) + [3] - 0, 10=10MHz clock for 8254 + 1= 1MHz clock for 8254 + [4] - 0=A/D Range is +/-10V + 1= +/-5V + 2= +/-2.5V + 3= +/-1V + 4= +/-0.5V + 5= user defined bipolar + 6= 0-10V + 7= 0-5V + 8= 0-2V + 9= 0-1V + 10= user defined unipolar + [5] - 0, 5=D/A outputs 0-5V (internal reference -5V) + 1, 10=D/A outputs 0-10V (internal reference -10V) + 2=D/A outputs unknow (external reference) + [6] - 0, 60=max 60kHz A/D sampling + 1,100=max 100kHz A/D sampling (PCL-718 with Option 001 installed) + +*/ + +#include "../comedidev.h" + +#include +#include +#include +#include + +#include "8253.h" + +// #define PCL818_MODE13_AO 1 + +// boards constants + +#define boardPCL818L 0 +#define boardPCL818H 1 +#define boardPCL818HD 2 +#define boardPCL818HG 3 +#define boardPCL818 4 +#define boardPCL718 5 + +// IO space len +#define PCLx1x_RANGE 16 +// IO space len if we use FIFO +#define PCLx1xFIFO_RANGE 32 + +// W: clear INT request +#define PCL818_CLRINT 8 +// R: return status byte +#define PCL818_STATUS 8 +// R: A/D high byte W: A/D range control +#define PCL818_RANGE 1 +// R: next mux scan channel W: mux scan channel & range control pointer +#define PCL818_MUX 2 +// R/W: operation control register +#define PCL818_CONTROL 9 +// W: counter enable +#define PCL818_CNTENABLE 10 + +// R: low byte of A/D W: soft A/D trigger +#define PCL818_AD_LO 0 +// R: high byte of A/D W: A/D range control +#define PCL818_AD_HI 1 +// W: D/A low&high byte +#define PCL818_DA_LO 4 +#define PCL818_DA_HI 5 +// R: low&high byte of DI +#define PCL818_DI_LO 3 +#define PCL818_DI_HI 11 +// W: low&high byte of DO +#define PCL818_DO_LO 3 +#define PCL818_DO_HI 11 +// W: PCL718 second D/A +#define PCL718_DA2_LO 6 +#define PCL718_DA2_HI 7 +// counters +#define PCL818_CTR0 12 +#define PCL818_CTR1 13 +#define PCL818_CTR2 14 +// W: counter control +#define PCL818_CTRCTL 15 + +// W: fifo enable/disable +#define PCL818_FI_ENABLE 6 +// W: fifo interrupt clear +#define PCL818_FI_INTCLR 20 +// W: fifo interrupt clear +#define PCL818_FI_FLUSH 25 +// R: fifo status +#define PCL818_FI_STATUS 25 +// R: one record from FIFO +#define PCL818_FI_DATALO 23 +#define PCL818_FI_DATAHI 23 + +// type of interrupt handler +#define INT_TYPE_AI1_INT 1 +#define INT_TYPE_AI1_DMA 2 +#define INT_TYPE_AI1_FIFO 3 +#define INT_TYPE_AI3_INT 4 +#define INT_TYPE_AI3_DMA 5 +#define INT_TYPE_AI3_FIFO 6 +#ifdef PCL818_MODE13_AO +#define INT_TYPE_AO1_INT 7 +#define INT_TYPE_AO3_INT 8 +#endif + +#ifdef unused +// RTC stuff... +#define INT_TYPE_AI1_DMA_RTC 9 +#define INT_TYPE_AI3_DMA_RTC 10 + +#define RTC_IRQ 8 +#define RTC_IO_EXTENT 0x10 +#endif + +#define MAGIC_DMA_WORD 0x5a5a + +static const comedi_lrange range_pcl818h_ai = { 9, { + BIP_RANGE(5), + BIP_RANGE(2.5), + BIP_RANGE(1.25), + BIP_RANGE(0.625), + UNI_RANGE(10), + UNI_RANGE(5), + UNI_RANGE(2.5), + UNI_RANGE(1.25), + BIP_RANGE(10), + } +}; + +static const comedi_lrange range_pcl818hg_ai = { 10, { + BIP_RANGE(5), + BIP_RANGE(0.5), + BIP_RANGE(0.05), + BIP_RANGE(0.005), + UNI_RANGE(10), + UNI_RANGE(1), + UNI_RANGE(0.1), + UNI_RANGE(0.01), + BIP_RANGE(10), + BIP_RANGE(1), + BIP_RANGE(0.1), + BIP_RANGE(0.01), + } +}; + +static const comedi_lrange range_pcl818l_l_ai = { 4, { + BIP_RANGE(5), + BIP_RANGE(2.5), + BIP_RANGE(1.25), + BIP_RANGE(0.625), + } +}; + +static const comedi_lrange range_pcl818l_h_ai = { 4, { + BIP_RANGE(10), + BIP_RANGE(5), + BIP_RANGE(2.5), + BIP_RANGE(1.25), + } +}; + +static const comedi_lrange range718_bipolar1 = { 1, {BIP_RANGE(1),} }; +static const comedi_lrange range718_bipolar0_5 = { 1, {BIP_RANGE(0.5),} }; +static const comedi_lrange range718_unipolar2 = { 1, {UNI_RANGE(2),} }; +static const comedi_lrange range718_unipolar1 = { 1, {BIP_RANGE(1),} }; + +static int pcl818_attach(comedi_device * dev, comedi_devconfig * it); +static int pcl818_detach(comedi_device * dev); + +#ifdef unused +static int RTC_lock = 0; /* RTC lock */ +static int RTC_timer_lock = 0; /* RTC int lock */ +#endif + +typedef struct { + const char *name; // driver name + int n_ranges; // len of range list + int n_aichan_se; // num of A/D chans in single ended mode + int n_aichan_diff; // num of A/D chans in diferencial mode + unsigned int ns_min; // minimal alllowed delay between samples (in ns) + int n_aochan; // num of D/A chans + int n_dichan; // num of DI chans + int n_dochan; // num of DO chans + const comedi_lrange *ai_range_type; // default A/D rangelist + const comedi_lrange *ao_range_type; // default D/A rangelist + unsigned int io_range; // len of IO space + unsigned int IRQbits; // allowed interrupts + unsigned int DMAbits; // allowed DMA chans + int ai_maxdata; // maxdata for A/D + int ao_maxdata; // maxdata for D/A + unsigned char fifo; // 1=board has FIFO + int is_818; +} boardtype; + +static const boardtype boardtypes[] = { + {"pcl818l", 4, 16, 8, 25000, 1, 16, 16, &range_pcl818l_l_ai, + &range_unipolar5, PCLx1x_RANGE, 0x00fc, + 0x0a, 0xfff, 0xfff, 0, 1}, + {"pcl818h", 9, 16, 8, 10000, 1, 16, 16, &range_pcl818h_ai, + &range_unipolar5, PCLx1x_RANGE, 0x00fc, + 0x0a, 0xfff, 0xfff, 0, 1}, + {"pcl818hd", 9, 16, 8, 10000, 1, 16, 16, &range_pcl818h_ai, + &range_unipolar5, PCLx1x_RANGE, 0x00fc, + 0x0a, 0xfff, 0xfff, 1, 1}, + {"pcl818hg", 12, 16, 8, 10000, 1, 16, 16, &range_pcl818hg_ai, + &range_unipolar5, PCLx1x_RANGE, 0x00fc, + 0x0a, 0xfff, 0xfff, 1, 1}, + {"pcl818", 9, 16, 8, 10000, 2, 16, 16, &range_pcl818h_ai, + &range_unipolar5, PCLx1x_RANGE, 0x00fc, + 0x0a, 0xfff, 0xfff, 0, 1}, + {"pcl718", 1, 16, 8, 16000, 2, 16, 16, &range_unipolar5, + &range_unipolar5, PCLx1x_RANGE, 0x00fc, + 0x0a, 0xfff, 0xfff, 0, 0}, + /* pcm3718 */ + {"pcm3718", 9, 16, 8, 10000, 0, 16, 16, &range_pcl818h_ai, + &range_unipolar5, PCLx1x_RANGE, 0x00fc, + 0x0a, 0xfff, 0xfff, 0, 1 /* XXX ? */ }, +}; + +#define n_boardtypes (sizeof(boardtypes)/sizeof(boardtype)) + +static comedi_driver driver_pcl818 = { + driver_name:"pcl818", + module:THIS_MODULE, + attach:pcl818_attach, + detach:pcl818_detach, + board_name:&boardtypes[0].name, + num_names:n_boardtypes, + offset:sizeof(boardtype), +}; + +COMEDI_INITCLEANUP(driver_pcl818); + +typedef struct { + unsigned int dma; // used DMA, 0=don't use DMA + int dma_rtc; // 1=RTC used with DMA, 0=no RTC alloc + unsigned int io_range; +#ifdef unused + unsigned long rtc_iobase; // RTC port region + unsigned int rtc_iosize; + unsigned int rtc_irq; + struct timer_list rtc_irq_timer; // timer for RTC sanity check + unsigned long rtc_freq; // RTC int freq + int rtc_irq_blocked; // 1=we now do AI with DMA&RTC +#endif + unsigned long dmabuf[2]; // pointers to begin of DMA buffers + unsigned int dmapages[2]; // len of DMA buffers in PAGE_SIZEs + unsigned int hwdmaptr[2]; // hardware address of DMA buffers + unsigned int hwdmasize[2]; // len of DMA buffers in Bytes + unsigned int dmasamplsize; // size in samples hwdmasize[0]/2 + unsigned int last_top_dma; // DMA pointer in last RTC int + int next_dma_buf; // which DMA buffer will be used next round + long dma_runs_to_end; // how many we must permorm DMA transfer to end of record + unsigned long last_dma_run; // how many bytes we must transfer on last DMA page + unsigned char neverending_ai; // if=1, then we do neverending record (you must use cancel()) + unsigned int ns_min; // manimal alllowed delay between samples (in us) for actual card + int i8253_osc_base; // 1/frequency of on board oscilator in ns + int irq_free; // 1=have allocated IRQ + int irq_blocked; // 1=IRQ now uses any subdev + int irq_was_now_closed; // when IRQ finish, there's stored int818_mode for last interrupt + int ai_mode; // who now uses IRQ - 1=AI1 int, 2=AI1 dma, 3=AI3 int, 4AI3 dma + comedi_subdevice *last_int_sub; // ptr to subdevice which now finish + int ai_act_scan; // how many scans we finished + int ai_act_chan; // actual position in actual scan + unsigned int act_chanlist[16]; // MUX setting for actual AI operations + unsigned int act_chanlist_len; // how long is actual MUX list + unsigned int act_chanlist_pos; // actual position in MUX list + unsigned int ai_scans; // len of scanlist + unsigned int ai_n_chan; // how many channels is measured + unsigned int *ai_chanlist; // actaul chanlist + unsigned int ai_flags; // flaglist + unsigned int ai_data_len; // len of data buffer + sampl_t *ai_data; // data buffer + unsigned int ai_timer1; // timers + unsigned int ai_timer2; + comedi_subdevice *sub_ai; // ptr to AI subdevice + unsigned char usefifo; // 1=use fifo + lsampl_t ao_readback[2]; +} pcl818_private; + +static const unsigned int muxonechan[] = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, // used for gain list programming + 0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff +}; + +#define devpriv ((pcl818_private *)dev->private) +#define this_board ((const boardtype *)dev->board_ptr) + +/* +============================================================================== +*/ +static void setup_channel_list(comedi_device * dev, comedi_subdevice * s, + unsigned int *chanlist, unsigned int n_chan, unsigned int seglen); +static int check_channel_list(comedi_device * dev, comedi_subdevice * s, + unsigned int *chanlist, unsigned int n_chan); + +static int pcl818_ai_cancel(comedi_device * dev, comedi_subdevice * s); +static void start_pacer(comedi_device * dev, int mode, unsigned int divisor1, + unsigned int divisor2); + +#ifdef unused +static int set_rtc_irq_bit(unsigned char bit); +static void rtc_dropped_irq(unsigned long data); +static int rtc_setfreq_irq(int freq); +#endif + +/* +============================================================================== + ANALOG INPUT MODE0, 818 cards, slow version +*/ +static int pcl818_ai_insn_read(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + int n; + int timeout; + + /* software trigger, DMA and INT off */ + outb(0, dev->iobase + PCL818_CONTROL); + + /* select channel */ + outb(muxonechan[CR_CHAN(insn->chanspec)], dev->iobase + PCL818_MUX); + + /* select gain */ + outb(CR_RANGE(insn->chanspec), dev->iobase + PCL818_RANGE); + + for (n = 0; n < insn->n; n++) { + + /* clear INT (conversion end) flag */ + outb(0, dev->iobase + PCL818_CLRINT); + + /* start conversion */ + outb(0, dev->iobase + PCL818_AD_LO); + + timeout = 100; + while (timeout--) { + if (inb(dev->iobase + PCL818_STATUS) & 0x10) + goto conv_finish; + comedi_udelay(1); + } + comedi_error(dev, "A/D insn timeout"); + /* clear INT (conversion end) flag */ + outb(0, dev->iobase + PCL818_CLRINT); + return -EIO; + + conv_finish: + data[n] = ((inb(dev->iobase + PCL818_AD_HI) << 4) | + (inb(dev->iobase + PCL818_AD_LO) >> 4)); + } + + return n; +} + +/* +============================================================================== + ANALOG OUTPUT MODE0, 818 cards + only one sample per call is supported +*/ +static int pcl818_ao_insn_read(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + int n; + int chan = CR_CHAN(insn->chanspec); + + for (n = 0; n < insn->n; n++) { + data[n] = devpriv->ao_readback[chan]; + } + + return n; +} + +static int pcl818_ao_insn_write(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + int n; + int chan = CR_CHAN(insn->chanspec); + + for (n = 0; n < insn->n; n++) { + devpriv->ao_readback[chan] = data[n]; + outb((data[n] & 0x000f) << 4, dev->iobase + + (chan) ? PCL718_DA2_LO : PCL818_DA_LO); + outb((data[n] & 0x0ff0) >> 4, dev->iobase + + (chan) ? PCL718_DA2_HI : PCL818_DA_HI); + } + + return n; +} + +/* +============================================================================== + DIGITAL INPUT MODE0, 818 cards + + only one sample per call is supported +*/ +static int pcl818_di_insn_bits(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + if (insn->n != 2) + return -EINVAL; + + data[1] = inb(dev->iobase + PCL818_DI_LO) | + (inb(dev->iobase + PCL818_DI_HI) << 8); + + return 2; +} + +/* +============================================================================== + DIGITAL OUTPUT MODE0, 818 cards + + only one sample per call is supported +*/ +static int pcl818_do_insn_bits(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + if (insn->n != 2) + return -EINVAL; + + s->state &= ~data[0]; + s->state |= (data[0] & data[1]); + + outb(s->state & 0xff, dev->iobase + PCL818_DO_LO); + outb((s->state >> 8), dev->iobase + PCL818_DO_HI); + + data[1] = s->state; + + return 2; +} + +/* +============================================================================== + analog input interrupt mode 1 & 3, 818 cards + one sample per interrupt version +*/ +static irqreturn_t interrupt_pcl818_ai_mode13_int(int irq, void *d) +{ + comedi_device *dev = d; + comedi_subdevice *s = dev->subdevices + 0; + int low; + int timeout = 50; /* wait max 50us */ + + while (timeout--) { + if (inb(dev->iobase + PCL818_STATUS) & 0x10) + goto conv_finish; + comedi_udelay(1); + } + outb(0, dev->iobase + PCL818_STATUS); /* clear INT request */ + comedi_error(dev, "A/D mode1/3 IRQ without DRDY!"); + pcl818_ai_cancel(dev, s); + s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR; + comedi_event(dev, s); + return IRQ_HANDLED; + + conv_finish: + low = inb(dev->iobase + PCL818_AD_LO); + comedi_buf_put(s->async, ((inb(dev->iobase + PCL818_AD_HI) << 4) | (low >> 4))); // get one sample + outb(0, dev->iobase + PCL818_CLRINT); /* clear INT request */ + + if ((low & 0xf) != devpriv->act_chanlist[devpriv->act_chanlist_pos]) { // dropout! + rt_printk + ("comedi: A/D mode1/3 IRQ - channel dropout %x!=%x !\n", + (low & 0xf), + devpriv->act_chanlist[devpriv->act_chanlist_pos]); + pcl818_ai_cancel(dev, s); + s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR; + comedi_event(dev, s); + return IRQ_HANDLED; + } + if (s->async->cur_chan == 0) { + // rt_printk("E"); + devpriv->ai_act_scan--; + } + + if (!devpriv->neverending_ai) { + if (devpriv->ai_act_scan == 0) { /* all data sampled */ + pcl818_ai_cancel(dev, s); + s->async->events |= COMEDI_CB_EOA; + } + } + comedi_event(dev, s); + return IRQ_HANDLED; +} + +/* +============================================================================== + analog input dma mode 1 & 3, 818 cards +*/ +static irqreturn_t interrupt_pcl818_ai_mode13_dma(int irq, void *d) +{ + comedi_device *dev = d; + comedi_subdevice *s = dev->subdevices + 0; + int i, len, bufptr; + unsigned long flags; + sampl_t *ptr; + + disable_dma(devpriv->dma); + devpriv->next_dma_buf = 1 - devpriv->next_dma_buf; + if ((devpriv->dma_runs_to_end) > -1 || devpriv->neverending_ai) { // switch dma bufs + set_dma_mode(devpriv->dma, DMA_MODE_READ); + flags = claim_dma_lock(); + set_dma_addr(devpriv->dma, + devpriv->hwdmaptr[devpriv->next_dma_buf]); + if (devpriv->dma_runs_to_end || devpriv->neverending_ai) { + set_dma_count(devpriv->dma, + devpriv->hwdmasize[devpriv->next_dma_buf]); + } else { + set_dma_count(devpriv->dma, devpriv->last_dma_run); + } + release_dma_lock(flags); + enable_dma(devpriv->dma); + } + rt_printk("comedi: A/D mode1/3 IRQ \n"); + + devpriv->dma_runs_to_end--; + outb(0, dev->iobase + PCL818_CLRINT); /* clear INT request */ + ptr = (sampl_t *) devpriv->dmabuf[1 - devpriv->next_dma_buf]; + + len = devpriv->hwdmasize[0] >> 1; + bufptr = 0; + + for (i = 0; i < len; i++) { + if ((ptr[bufptr] & 0xf) != devpriv->act_chanlist[devpriv->act_chanlist_pos]) { // dropout! + rt_printk + ("comedi: A/D mode1/3 DMA - channel dropout %d(card)!=%d(chanlist) at %d !\n", + (ptr[bufptr] & 0xf), + devpriv->act_chanlist[devpriv-> + act_chanlist_pos], + devpriv->act_chanlist_pos); + pcl818_ai_cancel(dev, s); + s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR; + comedi_event(dev, s); + return IRQ_HANDLED; + } + + comedi_buf_put(s->async, ptr[bufptr++] >> 4); // get one sample + + devpriv->act_chanlist_pos++; + if (devpriv->act_chanlist_pos >= devpriv->act_chanlist_len) { + devpriv->ai_act_scan--; + devpriv->act_chanlist_pos = 0; + } + + if (!devpriv->neverending_ai) + if (devpriv->ai_act_scan == 0) { /* all data sampled */ + pcl818_ai_cancel(dev, s); + s->async->events |= COMEDI_CB_EOA; + comedi_event(dev, s); + // printk("done int ai13 dma\n"); + return IRQ_HANDLED; + } + } + + if (len > 0) + comedi_event(dev, s); + return IRQ_HANDLED; +} + +#ifdef unused +/* +============================================================================== + analog input dma mode 1 & 3 over RTC, 818 cards +*/ +static irqreturn_t interrupt_pcl818_ai_mode13_dma_rtc(int irq, void *d) +{ + comedi_device *dev = d; + comedi_subdevice *s = dev->subdevices + 0; + unsigned long tmp; + unsigned int top1, top2, i, bufptr; + long ofs_dats; + sampl_t *dmabuf = (sampl_t *) devpriv->dmabuf[0]; + + //outb(2,0x378); + switch (devpriv->ai_mode) { + case INT_TYPE_AI1_DMA_RTC: + case INT_TYPE_AI3_DMA_RTC: + tmp = (CMOS_READ(RTC_INTR_FLAGS) & 0xF0); + mod_timer(&devpriv->rtc_irq_timer, + jiffies + HZ / devpriv->rtc_freq + 2 * HZ / 100); + + for (i = 0; i < 10; i++) { + top1 = get_dma_residue(devpriv->dma); + top2 = get_dma_residue(devpriv->dma); + if (top1 == top2) + break; + } + + if (top1 != top2) + return IRQ_HANDLED; + top1 = devpriv->hwdmasize[0] - top1; // where is now DMA in buffer + top1 >>= 1; + ofs_dats = top1 - devpriv->last_top_dma; // new samples from last call + if (ofs_dats < 0) + ofs_dats = (devpriv->dmasamplsize) + ofs_dats; + if (!ofs_dats) + return IRQ_HANDLED; // exit=no new samples from last call + // obsluz data + i = devpriv->last_top_dma - 1; + i &= (devpriv->dmasamplsize - 1); + + if (dmabuf[i] != MAGIC_DMA_WORD) { // DMA overflow! + comedi_error(dev, "A/D mode1/3 DMA buffer overflow!"); + //rt_printk("I %d dmabuf[i] %d %d\n",i,dmabuf[i],devpriv->dmasamplsize); + pcl818_ai_cancel(dev, s); + s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR; + comedi_event(dev, s); + return IRQ_HANDLED; + } + //rt_printk("r %ld ",ofs_dats); + + bufptr = devpriv->last_top_dma; + + for (i = 0; i < ofs_dats; i++) { + if ((dmabuf[bufptr] & 0xf) != devpriv->act_chanlist[devpriv->act_chanlist_pos]) { // dropout! + rt_printk + ("comedi: A/D mode1/3 DMA - channel dropout %d!=%d !\n", + (dmabuf[bufptr] & 0xf), + devpriv->act_chanlist[devpriv-> + act_chanlist_pos]); + pcl818_ai_cancel(dev, s); + s->async->events |= + COMEDI_CB_EOA | COMEDI_CB_ERROR; + comedi_event(dev, s); + return IRQ_HANDLED; + } + + comedi_buf_put(s->async, dmabuf[bufptr++] >> 4); // get one sample + bufptr &= (devpriv->dmasamplsize - 1); + + if (s->async->cur_chan == 0) { + devpriv->ai_act_scan--; + } + + if (!devpriv->neverending_ai) + if (devpriv->ai_act_scan == 0) { /* all data sampled */ + pcl818_ai_cancel(dev, s); + s->async->events |= COMEDI_CB_EOA; + comedi_event(dev, s); + //printk("done int ai13 dma\n"); + return IRQ_HANDLED; + } + } + + devpriv->last_top_dma = bufptr; + bufptr--; + bufptr &= (devpriv->dmasamplsize - 1); + dmabuf[bufptr] = MAGIC_DMA_WORD; + comedi_event(dev, s); + //outb(0,0x378); + return IRQ_HANDLED; + } + + //outb(0,0x378); + return IRQ_HANDLED; +} +#endif + +/* +============================================================================== + analog input interrupt mode 1 & 3, 818HD/HG cards +*/ +static irqreturn_t interrupt_pcl818_ai_mode13_fifo(int irq, void *d) +{ + comedi_device *dev = d; + comedi_subdevice *s = dev->subdevices + 0; + int i, len, lo; + + outb(0, dev->iobase + PCL818_FI_INTCLR); // clear fifo int request + + lo = inb(dev->iobase + PCL818_FI_STATUS); + + if (lo & 4) { + comedi_error(dev, "A/D mode1/3 FIFO overflow!"); + pcl818_ai_cancel(dev, s); + s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR; + comedi_event(dev, s); + return IRQ_HANDLED; + } + + if (lo & 1) { + comedi_error(dev, "A/D mode1/3 FIFO interrupt without data!"); + pcl818_ai_cancel(dev, s); + s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR; + comedi_event(dev, s); + return IRQ_HANDLED; + } + + if (lo & 2) { + len = 512; + } else { + len = 0; + } + + for (i = 0; i < len; i++) { + lo = inb(dev->iobase + PCL818_FI_DATALO); + if ((lo & 0xf) != devpriv->act_chanlist[devpriv->act_chanlist_pos]) { // dropout! + rt_printk + ("comedi: A/D mode1/3 FIFO - channel dropout %d!=%d !\n", + (lo & 0xf), + devpriv->act_chanlist[devpriv-> + act_chanlist_pos]); + pcl818_ai_cancel(dev, s); + s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR; + comedi_event(dev, s); + return IRQ_HANDLED; + } + + comedi_buf_put(s->async, (lo >> 4) | (inb(dev->iobase + PCL818_FI_DATAHI) << 4)); // get one sample + + if (s->async->cur_chan == 0) { + devpriv->ai_act_scan--; + } + + if (!devpriv->neverending_ai) + if (devpriv->ai_act_scan == 0) { /* all data sampled */ + pcl818_ai_cancel(dev, s); + s->async->events |= COMEDI_CB_EOA; + comedi_event(dev, s); + return IRQ_HANDLED; + } + } + + if (len > 0) + comedi_event(dev, s); + return IRQ_HANDLED; +} + +/* +============================================================================== + INT procedure +*/ +static irqreturn_t interrupt_pcl818(int irq, void *d PT_REGS_ARG) +{ + comedi_device *dev = d; + + if (!dev->attached) { + comedi_error(dev, "premature interrupt"); + return IRQ_HANDLED; + } + //rt_printk("I\n"); + + switch (devpriv->ai_mode) { + case INT_TYPE_AI1_DMA: + case INT_TYPE_AI3_DMA: + return interrupt_pcl818_ai_mode13_dma(irq, d); + case INT_TYPE_AI1_INT: + case INT_TYPE_AI3_INT: + return interrupt_pcl818_ai_mode13_int(irq, d); + case INT_TYPE_AI1_FIFO: + case INT_TYPE_AI3_FIFO: + return interrupt_pcl818_ai_mode13_fifo(irq, d); +#ifdef PCL818_MODE13_AO + case INT_TYPE_AO1_INT: + case INT_TYPE_AO3_INT: + return interrupt_pcl818_ao_mode13_int(irq, d); +#endif + default: + break; + } + + outb(0, dev->iobase + PCL818_CLRINT); /* clear INT request */ + + if ((!dev->irq) || (!devpriv->irq_free) || (!devpriv->irq_blocked) + || (!devpriv->ai_mode)) { + if (devpriv->irq_was_now_closed) { + if (devpriv->neverending_ai && + (devpriv->ai_mode == INT_TYPE_AI1_DMA + || devpriv->ai_mode == + INT_TYPE_AI3_DMA)) { + /* we had neverending ai but ai_cancel() has been called + the cleanup from ai_cancel() has been delayed until know + because the card doesn't seem to like being reprogrammed + while a DMA transfer is in progress + */ + comedi_subdevice *s = dev->subdevices + 0; + devpriv->ai_mode = devpriv->irq_was_now_closed; + devpriv->irq_was_now_closed = 0; + devpriv->neverending_ai = 0; + pcl818_ai_cancel(dev, s); + } + devpriv->irq_was_now_closed = 0; + return IRQ_HANDLED; + } + comedi_error(dev, "bad IRQ!"); + return IRQ_NONE; + } + + comedi_error(dev, "IRQ from unknow source!"); + return IRQ_NONE; +} + +/* +============================================================================== + ANALOG INPUT MODE 1 or 3 DMA , 818 cards +*/ +static void pcl818_ai_mode13dma_int(int mode, comedi_device * dev, + comedi_subdevice * s) +{ + unsigned int flags; + unsigned int bytes; + + rt_printk("mode13dma_int, mode: %d\n", mode); + disable_dma(devpriv->dma); // disable dma + bytes = devpriv->hwdmasize[0]; + if (!devpriv->neverending_ai) { + bytes = devpriv->ai_n_chan * devpriv->ai_scans * sizeof(sampl_t); // how many + devpriv->dma_runs_to_end = bytes / devpriv->hwdmasize[0]; // how many DMA pages we must fiil + devpriv->last_dma_run = bytes % devpriv->hwdmasize[0]; //on last dma transfer must be moved + devpriv->dma_runs_to_end--; + if (devpriv->dma_runs_to_end >= 0) + bytes = devpriv->hwdmasize[0]; + } + + devpriv->next_dma_buf = 0; + set_dma_mode(devpriv->dma, DMA_MODE_READ); + flags = claim_dma_lock(); + clear_dma_ff(devpriv->dma); + set_dma_addr(devpriv->dma, devpriv->hwdmaptr[0]); + set_dma_count(devpriv->dma, bytes); + release_dma_lock(flags); + enable_dma(devpriv->dma); + + if (mode == 1) { + devpriv->ai_mode = INT_TYPE_AI1_DMA; + outb(0x87 | (dev->irq << 4), dev->iobase + PCL818_CONTROL); /* Pacer+IRQ+DMA */ + } else { + devpriv->ai_mode = INT_TYPE_AI3_DMA; + outb(0x86 | (dev->irq << 4), dev->iobase + PCL818_CONTROL); /* Ext trig+IRQ+DMA */ + }; +} + +#ifdef unused +/* +============================================================================== + ANALOG INPUT MODE 1 or 3 DMA rtc, 818 cards +*/ +static void pcl818_ai_mode13dma_rtc(int mode, comedi_device * dev, + comedi_subdevice * s) +{ + unsigned int flags; + sampl_t *pole; + + set_dma_mode(devpriv->dma, DMA_MODE_READ | DMA_AUTOINIT); + flags = claim_dma_lock(); + clear_dma_ff(devpriv->dma); + set_dma_addr(devpriv->dma, devpriv->hwdmaptr[0]); + set_dma_count(devpriv->dma, devpriv->hwdmasize[0]); + release_dma_lock(flags); + enable_dma(devpriv->dma); + devpriv->last_top_dma = 0; //devpriv->hwdmasize[0]; + pole = (sampl_t *) devpriv->dmabuf[0]; + devpriv->dmasamplsize = devpriv->hwdmasize[0] / 2; + pole[devpriv->dmasamplsize - 1] = MAGIC_DMA_WORD; +#ifdef unused + devpriv->rtc_freq = rtc_setfreq_irq(2048); + devpriv->rtc_irq_timer.expires = + jiffies + HZ / devpriv->rtc_freq + 2 * HZ / 100; + devpriv->rtc_irq_timer.data = (unsigned long)dev; + devpriv->rtc_irq_timer.function = rtc_dropped_irq; + + add_timer(&devpriv->rtc_irq_timer); +#endif + + if (mode == 1) { + devpriv->int818_mode = INT_TYPE_AI1_DMA_RTC; + outb(0x07 | (dev->irq << 4), dev->iobase + PCL818_CONTROL); /* Pacer+DMA */ + } else { + devpriv->int818_mode = INT_TYPE_AI3_DMA_RTC; + outb(0x06 | (dev->irq << 4), dev->iobase + PCL818_CONTROL); /* Ext trig+DMA */ + }; +} +#endif + +/* +============================================================================== + ANALOG INPUT MODE 1 or 3, 818 cards +*/ +static int pcl818_ai_cmd_mode(int mode, comedi_device * dev, + comedi_subdevice * s) +{ + comedi_cmd *cmd = &s->async->cmd; + int divisor1, divisor2; + unsigned int seglen; + + rt_printk("pcl818_ai_cmd_mode()\n"); + if ((!dev->irq) && (!devpriv->dma_rtc)) { + comedi_error(dev, "IRQ not defined!"); + return -EINVAL; + } + + if (devpriv->irq_blocked) + return -EBUSY; + + start_pacer(dev, -1, 0, 0); // stop pacer + + seglen = check_channel_list(dev, s, devpriv->ai_chanlist, + devpriv->ai_n_chan); + if (seglen < 1) + return -EINVAL; + setup_channel_list(dev, s, devpriv->ai_chanlist, + devpriv->ai_n_chan, seglen); + + comedi_udelay(1); + + devpriv->ai_act_scan = devpriv->ai_scans; + devpriv->ai_act_chan = 0; + devpriv->irq_blocked = 1; + devpriv->irq_was_now_closed = 0; + devpriv->neverending_ai = 0; + devpriv->act_chanlist_pos = 0; + devpriv->dma_runs_to_end = 0; + + if ((devpriv->ai_scans == 0) || (devpriv->ai_scans == -1)) + devpriv->neverending_ai = 1; //well, user want neverending + + if (mode == 1) { + i8253_cascade_ns_to_timer(devpriv->i8253_osc_base, &divisor1, + &divisor2, &cmd->convert_arg, TRIG_ROUND_NEAREST); + if (divisor1 == 1) { /* PCL718/818 crash if any divisor is set to 1 */ + divisor1 = 2; + divisor2 /= 2; + } + if (divisor2 == 1) { + divisor2 = 2; + divisor1 /= 2; + } + } + + outb(0, dev->iobase + PCL818_CNTENABLE); /* enable pacer */ + + switch (devpriv->dma) { + case 1: // DMA + case 3: + if (devpriv->dma_rtc == 0) { + pcl818_ai_mode13dma_int(mode, dev, s); + } +#ifdef unused + else { + pcl818_ai_mode13dma_rtc(mode, dev, s); + } +#else + else { + return -EINVAL; + } +#endif + break; + case 0: // IRQ + // rt_printk("IRQ\n"); + if (mode == 1) { + devpriv->ai_mode = INT_TYPE_AI1_INT; + outb(0x83 | (dev->irq << 4), dev->iobase + PCL818_CONTROL); /* Pacer+IRQ */ + } else { + devpriv->ai_mode = INT_TYPE_AI3_INT; + outb(0x82 | (dev->irq << 4), dev->iobase + PCL818_CONTROL); /* Ext trig+IRQ */ + }; + break; + case -1: // FIFO + outb(1, dev->iobase + PCL818_FI_ENABLE); // enable FIFO + if (mode == 1) { + devpriv->ai_mode = INT_TYPE_AI1_FIFO; + outb(0x03, dev->iobase + PCL818_CONTROL); /* Pacer */ + } else { + devpriv->ai_mode = INT_TYPE_AI3_FIFO; + outb(0x02, dev->iobase + PCL818_CONTROL); + }; /* Ext trig */ + break; + } + + start_pacer(dev, mode, divisor1, divisor2); + +#ifdef unused + switch (devpriv->ai_mode) { + case INT_TYPE_AI1_DMA_RTC: + case INT_TYPE_AI3_DMA_RTC: + set_rtc_irq_bit(1); /* start RTC */ + break; + } +#endif + rt_printk("pcl818_ai_cmd_mode() end\n"); + return 0; +} + +#ifdef unused +/* +============================================================================== + ANALOG OUTPUT MODE 1 or 3, 818 cards +*/ +#ifdef PCL818_MODE13_AO +static int pcl818_ao_mode13(int mode, comedi_device * dev, comedi_subdevice * s, + comedi_trig * it) +{ + int divisor1, divisor2; + + if (!dev->irq) { + comedi_error(dev, "IRQ not defined!"); + return -EINVAL; + } + + if (devpriv->irq_blocked) + return -EBUSY; + + start_pacer(dev, -1, 0, 0); // stop pacer + + devpriv->int13_act_scan = it->n; + devpriv->int13_act_chan = 0; + devpriv->irq_blocked = 1; + devpriv->irq_was_now_closed = 0; + devpriv->neverending_ai = 0; + devpriv->act_chanlist_pos = 0; + + if (mode == 1) { + i8253_cascade_ns_to_timer(devpriv->i8253_osc_base, &divisor1, + &divisor2, &it->trigvar, TRIG_ROUND_NEAREST); + if (divisor1 == 1) { /* PCL818 crash if any divisor is set to 1 */ + divisor1 = 2; + divisor2 /= 2; + } + if (divisor2 == 1) { + divisor2 = 2; + divisor1 /= 2; + } + } + + outb(0, dev->iobase + PCL818_CNTENABLE); /* enable pacer */ + if (mode == 1) { + devpriv->int818_mode = INT_TYPE_AO1_INT; + outb(0x83 | (dev->irq << 4), dev->iobase + PCL818_CONTROL); /* Pacer+IRQ */ + } else { + devpriv->int818_mode = INT_TYPE_AO3_INT; + outb(0x82 | (dev->irq << 4), dev->iobase + PCL818_CONTROL); /* Ext trig+IRQ */ + }; + + start_pacer(dev, mode, divisor1, divisor2); + + return 0; +} + +/* +============================================================================== + ANALOG OUTPUT MODE 1, 818 cards +*/ +static int pcl818_ao_mode1(comedi_device * dev, comedi_subdevice * s, + comedi_trig * it) +{ + return pcl818_ao_mode13(1, dev, s, it); +} + +/* +============================================================================== + ANALOG OUTPUT MODE 3, 818 cards +*/ +static int pcl818_ao_mode3(comedi_device * dev, comedi_subdevice * s, + comedi_trig * it) +{ + return pcl818_ao_mode13(3, dev, s, it); +} +#endif +#endif + +/* +============================================================================== + Start/stop pacer onboard pacer +*/ +static void start_pacer(comedi_device * dev, int mode, unsigned int divisor1, + unsigned int divisor2) +{ + outb(0xb4, dev->iobase + PCL818_CTRCTL); + outb(0x74, dev->iobase + PCL818_CTRCTL); + comedi_udelay(1); + + if (mode == 1) { + outb(divisor2 & 0xff, dev->iobase + PCL818_CTR2); + outb((divisor2 >> 8) & 0xff, dev->iobase + PCL818_CTR2); + outb(divisor1 & 0xff, dev->iobase + PCL818_CTR1); + outb((divisor1 >> 8) & 0xff, dev->iobase + PCL818_CTR1); + } +} + +/* +============================================================================== + Check if channel list from user is builded correctly + If it's ok, then program scan/gain logic +*/ +static int check_channel_list(comedi_device * dev, comedi_subdevice * s, + unsigned int *chanlist, unsigned int n_chan) +{ + unsigned int chansegment[16]; + unsigned int i, nowmustbechan, seglen, segpos; + + /* correct channel and range number check itself comedi/range.c */ + if (n_chan < 1) { + comedi_error(dev, "range/channel list is empty!"); + return 0; + } + + if (n_chan > 1) { + // first channel is everytime ok + chansegment[0] = chanlist[0]; + // build part of chanlist + for (i = 1, seglen = 1; i < n_chan; i++, seglen++) { + // rt_printk("%d. %d %d\n",i,CR_CHAN(it->chanlist[i]),CR_RANGE(it->chanlist[i])); + // we detect loop, this must by finish + if (chanlist[0] == chanlist[i]) + break; + nowmustbechan = + (CR_CHAN(chansegment[i - 1]) + 1) % s->n_chan; + if (nowmustbechan != CR_CHAN(chanlist[i])) { // channel list isn't continous :-( + rt_printk + ("comedi%d: pcl818: channel list must be continous! chanlist[%i]=%d but must be %d or %d!\n", + dev->minor, i, CR_CHAN(chanlist[i]), + nowmustbechan, CR_CHAN(chanlist[0])); + return 0; + } + // well, this is next correct channel in list + chansegment[i] = chanlist[i]; + } + + // check whole chanlist + for (i = 0, segpos = 0; i < n_chan; i++) { + //rt_printk("%d %d=%d %d\n",CR_CHAN(chansegment[i%seglen]),CR_RANGE(chansegment[i%seglen]),CR_CHAN(it->chanlist[i]),CR_RANGE(it->chanlist[i])); + if (chanlist[i] != chansegment[i % seglen]) { + rt_printk + ("comedi%d: pcl818: bad channel or range number! chanlist[%i]=%d,%d,%d and not %d,%d,%d!\n", + dev->minor, i, CR_CHAN(chansegment[i]), + CR_RANGE(chansegment[i]), + CR_AREF(chansegment[i]), + CR_CHAN(chanlist[i % seglen]), + CR_RANGE(chanlist[i % seglen]), + CR_AREF(chansegment[i % seglen])); + return 0; // chan/gain list is strange + } + } + } else { + seglen = 1; + } + rt_printk("check_channel_list: seglen %d\n", seglen); + return seglen; +} + +static void setup_channel_list(comedi_device * dev, comedi_subdevice * s, + unsigned int *chanlist, unsigned int n_chan, unsigned int seglen) +{ + int i; + + devpriv->act_chanlist_len = seglen; + devpriv->act_chanlist_pos = 0; + + for (i = 0; i < seglen; i++) { // store range list to card + devpriv->act_chanlist[i] = CR_CHAN(chanlist[i]); + outb(muxonechan[CR_CHAN(chanlist[i])], dev->iobase + PCL818_MUX); /* select channel */ + outb(CR_RANGE(chanlist[i]), dev->iobase + PCL818_RANGE); /* select gain */ + } + + comedi_udelay(1); + + /* select channel interval to scan */ + outb(devpriv->act_chanlist[0] | (devpriv->act_chanlist[seglen - + 1] << 4), dev->iobase + PCL818_MUX); +} + +/* +============================================================================== + Check if board is switched to SE (1) or DIFF(0) mode +*/ +static int check_single_ended(unsigned int port) +{ + if (inb(port + PCL818_STATUS) & 0x20) { + return 1; + } else { + return 0; + } +} + +/* +============================================================================== +*/ +static int ai_cmdtest(comedi_device * dev, comedi_subdevice * s, + comedi_cmd * cmd) +{ + int err = 0; + int tmp, divisor1, divisor2; + + /* step 1: make sure trigger sources are trivially valid */ + + tmp = cmd->start_src; + cmd->start_src &= TRIG_NOW; + if (!cmd->start_src || tmp != cmd->start_src) + err++; + + tmp = cmd->scan_begin_src; + cmd->scan_begin_src &= TRIG_FOLLOW; + if (!cmd->scan_begin_src || tmp != cmd->scan_begin_src) + err++; + + tmp = cmd->convert_src; + cmd->convert_src &= TRIG_TIMER | TRIG_EXT; + if (!cmd->convert_src || tmp != cmd->convert_src) + err++; + + tmp = cmd->scan_end_src; + cmd->scan_end_src &= TRIG_COUNT; + if (!cmd->scan_end_src || tmp != cmd->scan_end_src) + err++; + + tmp = cmd->stop_src; + cmd->stop_src &= TRIG_COUNT | TRIG_NONE; + if (!cmd->stop_src || tmp != cmd->stop_src) + err++; + + if (err) { + return 1; + } + + /* step 2: make sure trigger sources are unique and mutually compatible */ + + if (cmd->start_src != TRIG_NOW) { + cmd->start_src = TRIG_NOW; + err++; + } + if (cmd->scan_begin_src != TRIG_FOLLOW) { + cmd->scan_begin_src = TRIG_FOLLOW; + err++; + } + if (cmd->convert_src != TRIG_TIMER && cmd->convert_src != TRIG_EXT) + err++; + + if (cmd->scan_end_src != TRIG_COUNT) { + cmd->scan_end_src = TRIG_COUNT; + err++; + } + + if (cmd->stop_src != TRIG_NONE && cmd->stop_src != TRIG_COUNT) + err++; + + if (err) { + return 2; + } + + /* step 3: make sure arguments are trivially compatible */ + + if (cmd->start_arg != 0) { + cmd->start_arg = 0; + err++; + } + + if (cmd->scan_begin_arg != 0) { + cmd->scan_begin_arg = 0; + err++; + } + + if (cmd->convert_src == TRIG_TIMER) { + if (cmd->convert_arg < this_board->ns_min) { + cmd->convert_arg = this_board->ns_min; + err++; + } + } else { /* TRIG_EXT */ + if (cmd->convert_arg != 0) { + cmd->convert_arg = 0; + err++; + } + } + + if (!cmd->chanlist_len) { + cmd->chanlist_len = 1; + err++; + } + if (cmd->chanlist_len > s->n_chan) { + cmd->chanlist_len = s->n_chan; + err++; + } + if (cmd->scan_end_arg != cmd->chanlist_len) { + cmd->scan_end_arg = cmd->chanlist_len; + err++; + } + if (cmd->stop_src == TRIG_COUNT) { + if (!cmd->stop_arg) { + cmd->stop_arg = 1; + err++; + } + } else { /* TRIG_NONE */ + if (cmd->stop_arg != 0) { + cmd->stop_arg = 0; + err++; + } + } + + if (err) { + return 3; + } + + /* step 4: fix up any arguments */ + + if (cmd->convert_src == TRIG_TIMER) { + tmp = cmd->convert_arg; + i8253_cascade_ns_to_timer(devpriv->i8253_osc_base, &divisor1, + &divisor2, &cmd->convert_arg, + cmd->flags & TRIG_ROUND_MASK); + if (cmd->convert_arg < this_board->ns_min) + cmd->convert_arg = this_board->ns_min; + if (tmp != cmd->convert_arg) + err++; + } + + if (err) { + return 4; + } + + /* step 5: complain about special chanlist considerations */ + + if (cmd->chanlist) { + if (!check_channel_list(dev, s, cmd->chanlist, + cmd->chanlist_len)) + return 5; // incorrect channels list + } + + return 0; +} + +/* +============================================================================== +*/ +static int ai_cmd(comedi_device * dev, comedi_subdevice * s) +{ + comedi_cmd *cmd = &s->async->cmd; + int retval; + + rt_printk("pcl818_ai_cmd()\n"); + devpriv->ai_n_chan = cmd->chanlist_len; + devpriv->ai_chanlist = cmd->chanlist; + devpriv->ai_flags = cmd->flags; + devpriv->ai_data_len = s->async->prealloc_bufsz; + devpriv->ai_data = s->async->prealloc_buf; + devpriv->ai_timer1 = 0; + devpriv->ai_timer2 = 0; + + if (cmd->stop_src == TRIG_COUNT) { + devpriv->ai_scans = cmd->stop_arg; + } else { + devpriv->ai_scans = 0; + } + + if (cmd->scan_begin_src == TRIG_FOLLOW) { // mode 1, 3 + if (cmd->convert_src == TRIG_TIMER) { // mode 1 + devpriv->ai_timer1 = cmd->convert_arg; + retval = pcl818_ai_cmd_mode(1, dev, s); + rt_printk("pcl818_ai_cmd() end\n"); + return retval; + } + if (cmd->convert_src == TRIG_EXT) { // mode 3 + return pcl818_ai_cmd_mode(3, dev, s); + } + } + + return -1; +} + +/* +============================================================================== + cancel any mode 1-4 AI +*/ +static int pcl818_ai_cancel(comedi_device * dev, comedi_subdevice * s) +{ + if (devpriv->irq_blocked > 0) { + rt_printk("pcl818_ai_cancel()\n"); + devpriv->irq_was_now_closed = devpriv->ai_mode; + devpriv->ai_mode = 0; + + switch (devpriv->irq_was_now_closed) { +#ifdef unused + case INT_TYPE_AI1_DMA_RTC: + case INT_TYPE_AI3_DMA_RTC: + set_rtc_irq_bit(0); // stop RTC + del_timer(&devpriv->rtc_irq_timer); +#endif + case INT_TYPE_AI1_DMA: + case INT_TYPE_AI3_DMA: + if (devpriv->neverending_ai) { + /* wait for running dma transfer to end, do cleanup in interrupt */ + goto end; + } + disable_dma(devpriv->dma); + case INT_TYPE_AI1_INT: + case INT_TYPE_AI3_INT: + case INT_TYPE_AI1_FIFO: + case INT_TYPE_AI3_FIFO: +#ifdef PCL818_MODE13_AO + case INT_TYPE_AO1_INT: + case INT_TYPE_AO3_INT: +#endif + outb(inb(dev->iobase + PCL818_CONTROL) & 0x73, dev->iobase + PCL818_CONTROL); /* Stop A/D */ + comedi_udelay(1); + start_pacer(dev, -1, 0, 0); + outb(0, dev->iobase + PCL818_AD_LO); + inb(dev->iobase + PCL818_AD_LO); + inb(dev->iobase + PCL818_AD_HI); + outb(0, dev->iobase + PCL818_CLRINT); /* clear INT request */ + outb(0, dev->iobase + PCL818_CONTROL); /* Stop A/D */ + if (devpriv->usefifo) { // FIFO shutdown + outb(0, dev->iobase + PCL818_FI_INTCLR); + outb(0, dev->iobase + PCL818_FI_FLUSH); + outb(0, dev->iobase + PCL818_FI_ENABLE); + } + devpriv->irq_blocked = 0; + devpriv->last_int_sub = s; + devpriv->neverending_ai = 0; + break; + } + } + + end: + rt_printk("pcl818_ai_cancel() end\n"); + return 0; +} + +/* +============================================================================== + chech for PCL818 +*/ +static int pcl818_check(unsigned long iobase) +{ + outb(0x00, iobase + PCL818_MUX); + comedi_udelay(1); + if (inb(iobase + PCL818_MUX) != 0x00) + return 1; //there isn't card + outb(0x55, iobase + PCL818_MUX); + comedi_udelay(1); + if (inb(iobase + PCL818_MUX) != 0x55) + return 1; //there isn't card + outb(0x00, iobase + PCL818_MUX); + comedi_udelay(1); + outb(0x18, iobase + PCL818_CONTROL); + comedi_udelay(1); + if (inb(iobase + PCL818_CONTROL) != 0x18) + return 1; //there isn't card + return 0; // ok, card exist +} + +/* +============================================================================== + reset whole PCL-818 cards +*/ +static void pcl818_reset(comedi_device * dev) +{ + if (devpriv->usefifo) { // FIFO shutdown + outb(0, dev->iobase + PCL818_FI_INTCLR); + outb(0, dev->iobase + PCL818_FI_FLUSH); + outb(0, dev->iobase + PCL818_FI_ENABLE); + } + outb(0, dev->iobase + PCL818_DA_LO); // DAC=0V + outb(0, dev->iobase + PCL818_DA_HI); + comedi_udelay(1); + outb(0, dev->iobase + PCL818_DO_HI); // DO=$0000 + outb(0, dev->iobase + PCL818_DO_LO); + comedi_udelay(1); + outb(0, dev->iobase + PCL818_CONTROL); + outb(0, dev->iobase + PCL818_CNTENABLE); + outb(0, dev->iobase + PCL818_MUX); + outb(0, dev->iobase + PCL818_CLRINT); + outb(0xb0, dev->iobase + PCL818_CTRCTL); /* Stop pacer */ + outb(0x70, dev->iobase + PCL818_CTRCTL); + outb(0x30, dev->iobase + PCL818_CTRCTL); + if (this_board->is_818) { + outb(0, dev->iobase + PCL818_RANGE); + } else { + outb(0, dev->iobase + PCL718_DA2_LO); + outb(0, dev->iobase + PCL718_DA2_HI); + } +} + +#ifdef unused +/* +============================================================================== + Enable(1)/disable(0) periodic interrupts from RTC +*/ +static int set_rtc_irq_bit(unsigned char bit) +{ + unsigned char val; + unsigned long flags; + + if (bit == 1) { + RTC_timer_lock++; + if (RTC_timer_lock > 1) + return 0; + } else { + RTC_timer_lock--; + if (RTC_timer_lock < 0) + RTC_timer_lock = 0; + if (RTC_timer_lock > 0) + return 0; + } + + save_flags(flags); + cli(); + val = CMOS_READ(RTC_CONTROL); + if (bit) { + val |= RTC_PIE; + } else { + val &= ~RTC_PIE; + } + CMOS_WRITE(val, RTC_CONTROL); + CMOS_READ(RTC_INTR_FLAGS); + restore_flags(flags); + return 0; +} + +/* +============================================================================== + Restart RTC if something stop it (xntpd every 11 mins or large IDE transfers) +*/ +static void rtc_dropped_irq(unsigned long data) +{ + comedi_device *dev = (void *)data; + unsigned long flags, tmp; + + switch (devpriv->int818_mode) { + case INT_TYPE_AI1_DMA_RTC: + case INT_TYPE_AI3_DMA_RTC: + mod_timer(&devpriv->rtc_irq_timer, + jiffies + HZ / devpriv->rtc_freq + 2 * HZ / 100); + save_flags(flags); + cli(); + tmp = (CMOS_READ(RTC_INTR_FLAGS) & 0xF0); /* restart */ + restore_flags(flags); + break; + }; +} + +/* +============================================================================== + Set frequency of interrupts from RTC +*/ +static int rtc_setfreq_irq(int freq) +{ + int tmp = 0; + int rtc_freq; + unsigned char val; + unsigned long flags; + + if (freq < 2) + freq = 2; + if (freq > 8192) + freq = 8192; + + while (freq > (1 << tmp)) + tmp++; + + rtc_freq = 1 << tmp; + + save_flags(flags); + cli(); + val = CMOS_READ(RTC_FREQ_SELECT) & 0xf0; + val |= (16 - tmp); + CMOS_WRITE(val, RTC_FREQ_SELECT); + restore_flags(flags); + return rtc_freq; +} +#endif + +/* +============================================================================== + Free any resources that we have claimed +*/ +static void free_resources(comedi_device * dev) +{ + //rt_printk("free_resource()\n"); + if (dev->private) { + pcl818_ai_cancel(dev, devpriv->sub_ai); + pcl818_reset(dev); + if (devpriv->dma) + free_dma(devpriv->dma); + if (devpriv->dmabuf[0]) + free_pages(devpriv->dmabuf[0], devpriv->dmapages[0]); + if (devpriv->dmabuf[1]) + free_pages(devpriv->dmabuf[1], devpriv->dmapages[1]); +#ifdef unused + if (devpriv->rtc_irq) + comedi_free_irq(devpriv->rtc_irq, dev); + if ((devpriv->dma_rtc) && (RTC_lock == 1)) { + if (devpriv->rtc_iobase) + release_region(devpriv->rtc_iobase, + devpriv->rtc_iosize); + } + if (devpriv->dma_rtc) + RTC_lock--; +#endif + } + + if (dev->irq) + free_irq(dev->irq, dev); + if (dev->iobase) + release_region(dev->iobase, devpriv->io_range); + //rt_printk("free_resource() end\n"); +} + +/* +============================================================================== + + Initialization + +*/ +static int pcl818_attach(comedi_device * dev, comedi_devconfig * it) +{ + int ret; + unsigned long iobase; + unsigned int irq, dma; + unsigned long pages; + comedi_subdevice *s; + + if ((ret = alloc_private(dev, sizeof(pcl818_private))) < 0) + return ret; /* Can't alloc mem */ + + /* claim our I/O space */ + iobase = it->options[0]; + printk("comedi%d: pcl818: board=%s, ioport=0x%03lx", + dev->minor, this_board->name, iobase); + devpriv->io_range = this_board->io_range; + if ((this_board->fifo) && (it->options[2] == -1)) { // we've board with FIFO and we want to use FIFO + devpriv->io_range = PCLx1xFIFO_RANGE; + devpriv->usefifo = 1; + } + if (!request_region(iobase, devpriv->io_range, "pcl818")) { + rt_printk("I/O port conflict\n"); + return -EIO; + } + + dev->iobase = iobase; + + if (pcl818_check(iobase)) { + rt_printk(", I can't detect board. FAIL!\n"); + return -EIO; + } + + /* set up some name stuff */ + dev->board_name = this_board->name; + /* grab our IRQ */ + irq = 0; + if (this_board->IRQbits != 0) { /* board support IRQ */ + irq = it->options[1]; + if (irq) { /* we want to use IRQ */ + if (((1 << irq) & this_board->IRQbits) == 0) { + rt_printk + (", IRQ %u is out of allowed range, DISABLING IT", + irq); + irq = 0; /* Bad IRQ */ + } else { + if (comedi_request_irq(irq, interrupt_pcl818, 0, + "pcl818", dev)) { + rt_printk + (", unable to allocate IRQ %u, DISABLING IT", + irq); + irq = 0; /* Can't use IRQ */ + } else { + rt_printk(", irq=%u", irq); + } + } + } + } + + dev->irq = irq; + if (irq) { + devpriv->irq_free = 1; + } /* 1=we have allocated irq */ + else { + devpriv->irq_free = 0; + } + devpriv->irq_blocked = 0; /* number of subdevice which use IRQ */ + devpriv->ai_mode = 0; /* mode of irq */ + +#ifdef unused + /* grab RTC for DMA operations */ + devpriv->dma_rtc = 0; + if (it->options[2] > 0) { // we want to use DMA + if (RTC_lock == 0) { + if (!request_region(RTC_PORT(0), RTC_IO_EXTENT, + "pcl818 (RTC)")) + goto no_rtc; + } + devpriv->rtc_iobase = RTC_PORT(0); + devpriv->rtc_iosize = RTC_IO_EXTENT; + RTC_lock++; + if (!comedi_request_irq(RTC_IRQ, + interrupt_pcl818_ai_mode13_dma_rtc, 0, + "pcl818 DMA (RTC)", dev)) { + devpriv->dma_rtc = 1; + devpriv->rtc_irq = RTC_IRQ; + rt_printk(", dma_irq=%u", devpriv->rtc_irq); + } else { + RTC_lock--; + if (RTC_lock == 0) { + if (devpriv->rtc_iobase) + release_region(devpriv->rtc_iobase, + devpriv->rtc_iosize); + } + devpriv->rtc_iobase = 0; + devpriv->rtc_iosize = 0; + } + } + + no_rtc: +#endif + /* grab our DMA */ + dma = 0; + devpriv->dma = dma; + if ((devpriv->irq_free == 0) && (devpriv->dma_rtc == 0)) + goto no_dma; /* if we haven't IRQ, we can't use DMA */ + if (this_board->DMAbits != 0) { /* board support DMA */ + dma = it->options[2]; + if (dma < 1) + goto no_dma; /* DMA disabled */ + if (((1 << dma) & this_board->DMAbits) == 0) { + rt_printk(", DMA is out of allowed range, FAIL!\n"); + return -EINVAL; /* Bad DMA */ + } + ret = request_dma(dma, "pcl818"); + if (ret) { + rt_printk(", unable to allocate DMA %u, FAIL!\n", dma); + return -EBUSY; /* DMA isn't free */ + } + devpriv->dma = dma; + rt_printk(", dma=%u", dma); + pages = 2; /* we need 16KB */ + devpriv->dmabuf[0] = __get_dma_pages(GFP_KERNEL, pages); + if (!devpriv->dmabuf[0]) { + rt_printk(", unable to allocate DMA buffer, FAIL!\n"); + /* maybe experiment with try_to_free_pages() will help .... */ + return -EBUSY; /* no buffer :-( */ + } + devpriv->dmapages[0] = pages; + devpriv->hwdmaptr[0] = virt_to_bus((void *)devpriv->dmabuf[0]); + devpriv->hwdmasize[0] = (1 << pages) * PAGE_SIZE; + //rt_printk("%d %d %ld, ",devpriv->dmapages[0],devpriv->hwdmasize[0],PAGE_SIZE); + if (devpriv->dma_rtc == 0) { // we must do duble buff :-( + devpriv->dmabuf[1] = __get_dma_pages(GFP_KERNEL, pages); + if (!devpriv->dmabuf[1]) { + rt_printk + (", unable to allocate DMA buffer, FAIL!\n"); + return -EBUSY; + } + devpriv->dmapages[1] = pages; + devpriv->hwdmaptr[1] = + virt_to_bus((void *)devpriv->dmabuf[1]); + devpriv->hwdmasize[1] = (1 << pages) * PAGE_SIZE; + } + } + + no_dma: + + if ((ret = alloc_subdevices(dev, 4)) < 0) + return ret; + + s = dev->subdevices + 0; + if (!this_board->n_aichan_se) { + s->type = COMEDI_SUBD_UNUSED; + } else { + s->type = COMEDI_SUBD_AI; + devpriv->sub_ai = s; + s->subdev_flags = SDF_READABLE; + if (check_single_ended(dev->iobase)) { + s->n_chan = this_board->n_aichan_se; + s->subdev_flags |= SDF_COMMON | SDF_GROUND; + printk(", %dchans S.E. DAC", s->n_chan); + } else { + s->n_chan = this_board->n_aichan_diff; + s->subdev_flags |= SDF_DIFF; + printk(", %dchans DIFF DAC", s->n_chan); + } + s->maxdata = this_board->ai_maxdata; + s->len_chanlist = s->n_chan; + s->range_table = this_board->ai_range_type; + s->cancel = pcl818_ai_cancel; + s->insn_read = pcl818_ai_insn_read; + if ((irq) || (devpriv->dma_rtc)) { + dev->read_subdev = s; + s->subdev_flags |= SDF_CMD_READ; + s->do_cmdtest = ai_cmdtest; + s->do_cmd = ai_cmd; + } + if (this_board->is_818) { + if ((it->options[4] == 1) || (it->options[4] == 10)) + s->range_table = &range_pcl818l_h_ai; // secondary range list jumper selectable + } else { + switch (it->options[4]) { + case 0: + s->range_table = &range_bipolar10; + break; + case 1: + s->range_table = &range_bipolar5; + break; + case 2: + s->range_table = &range_bipolar2_5; + break; + case 3: + s->range_table = &range718_bipolar1; + break; + case 4: + s->range_table = &range718_bipolar0_5; + break; + case 6: + s->range_table = &range_unipolar10; + break; + case 7: + s->range_table = &range_unipolar5; + break; + case 8: + s->range_table = &range718_unipolar2; + break; + case 9: + s->range_table = &range718_unipolar1; + break; + default: + s->range_table = &range_unknown; + break; + } + } + } + + s = dev->subdevices + 1; + if (!this_board->n_aochan) { + s->type = COMEDI_SUBD_UNUSED; + } else { + s->type = COMEDI_SUBD_AO; + s->subdev_flags = SDF_WRITABLE | SDF_GROUND; + s->n_chan = this_board->n_aochan; + s->maxdata = this_board->ao_maxdata; + s->len_chanlist = this_board->n_aochan; + s->range_table = this_board->ao_range_type; + s->insn_read = pcl818_ao_insn_read; + s->insn_write = pcl818_ao_insn_write; +#ifdef unused +#ifdef PCL818_MODE13_AO + if (irq) { + s->trig[1] = pcl818_ao_mode1; + s->trig[3] = pcl818_ao_mode3; + } +#endif +#endif + if (this_board->is_818) { + if ((it->options[4] == 1) || (it->options[4] == 10)) + s->range_table = &range_unipolar10; + if (it->options[4] == 2) + s->range_table = &range_unknown; + } else { + if ((it->options[5] == 1) || (it->options[5] == 10)) + s->range_table = &range_unipolar10; + if (it->options[5] == 2) + s->range_table = &range_unknown; + } + } + + s = dev->subdevices + 2; + if (!this_board->n_dichan) { + s->type = COMEDI_SUBD_UNUSED; + } else { + s->type = COMEDI_SUBD_DI; + s->subdev_flags = SDF_READABLE; + s->n_chan = this_board->n_dichan; + s->maxdata = 1; + s->len_chanlist = this_board->n_dichan; + s->range_table = &range_digital; + s->insn_bits = pcl818_di_insn_bits; + } + + s = dev->subdevices + 3; + if (!this_board->n_dochan) { + s->type = COMEDI_SUBD_UNUSED; + } else { + s->type = COMEDI_SUBD_DO; + s->subdev_flags = SDF_WRITABLE; + s->n_chan = this_board->n_dochan; + s->maxdata = 1; + s->len_chanlist = this_board->n_dochan; + s->range_table = &range_digital; + s->insn_bits = pcl818_do_insn_bits; + } + + /* select 1/10MHz oscilator */ + if ((it->options[3] == 0) || (it->options[3] == 10)) { + devpriv->i8253_osc_base = 100; + } else { + devpriv->i8253_osc_base = 1000; + } + + /* max sampling speed */ + devpriv->ns_min = this_board->ns_min; + + if (!this_board->is_818) { + if ((it->options[6] == 1) || (it->options[6] == 100)) + devpriv->ns_min = 10000; /* extended PCL718 to 100kHz DAC */ + } + + pcl818_reset(dev); + + rt_printk("\n"); + + return 0; +} + +/* +============================================================================== + Removes device + */ +static int pcl818_detach(comedi_device * dev) +{ + // rt_printk("comedi%d: pcl818: remove\n", dev->minor); + free_resources(dev); + return 0; +} -- 2.34.1