From 4e3243f549540235d180e446715a14c1b5827902 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Fri, 18 Jun 2010 11:33:16 -0700 Subject: [PATCH] iwlwifi: name change from signal protection flag This bit need to be set for both RTS/CTS or CTS-to-self protection, if CTS-to-self is used, then uCode will check the RXON_FLG_SELF_CTS_EN status. Change the name from TX_CMD_FLG_RTS_CTS_MSK to TX_CMD_FLAG_PROT_REQUIRE_MSK to match the behavior of the bit setting. Also update comments to reflect which hardware uses which of the TX command flags. Signed-off-by: Wey-Yi Guy Signed-off-by: Reinette Chatre --- drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c | 2 +- drivers/net/wireless/iwlwifi/iwl-commands.h | 30 ++++++++++++++------- 2 files changed, 22 insertions(+), 10 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c index d89a11c6558e..f06d1feedf81 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c @@ -214,7 +214,7 @@ static void iwlagn_chain_noise_reset(struct iwl_priv *priv) static void iwlagn_rts_tx_cmd_flag(struct ieee80211_tx_info *info, __le32 *tx_flags) { - *tx_flags |= TX_CMD_FLG_RTS_CTS_MSK; + *tx_flags |= TX_CMD_FLG_PROT_REQUIRE_MSK; } /* Calc max signal level (dBm) among 3 possible receivers */ diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h index 498492565912..a304f771bcc3 100644 --- a/drivers/net/wireless/iwlwifi/iwl-commands.h +++ b/drivers/net/wireless/iwlwifi/iwl-commands.h @@ -1399,18 +1399,27 @@ struct iwl_rx_mpdu_res_start { /* REPLY_TX Tx flags field */ -/* 1: Use RTS/CTS protocol or CTS-to-self if spec allows it +/* + * 1: Use RTS/CTS protocol or CTS-to-self if spec allows it * before this frame. if CTS-to-self required check - * RXON_FLG_SELF_CTS_EN status. */ -#define TX_CMD_FLG_RTS_CTS_MSK cpu_to_le32(1 << 0) + * RXON_FLG_SELF_CTS_EN status. + * unused in 3945/4965, used in 5000 series and after + */ +#define TX_CMD_FLG_PROT_REQUIRE_MSK cpu_to_le32(1 << 0) -/* 1: Use Request-To-Send protocol before this frame. - * Mutually exclusive vs. TX_CMD_FLG_CTS_MSK. */ +/* + * 1: Use Request-To-Send protocol before this frame. + * Mutually exclusive vs. TX_CMD_FLG_CTS_MSK. + * used in 3945/4965, unused in 5000 series and after + */ #define TX_CMD_FLG_RTS_MSK cpu_to_le32(1 << 1) -/* 1: Transmit Clear-To-Send to self before this frame. +/* + * 1: Transmit Clear-To-Send to self before this frame. * Driver should set this for AUTH/DEAUTH/ASSOC-REQ/REASSOC mgmnt frames. - * Mutually exclusive vs. TX_CMD_FLG_RTS_MSK. */ + * Mutually exclusive vs. TX_CMD_FLG_RTS_MSK. + * used in 3945/4965, unused in 5000 series and after + */ #define TX_CMD_FLG_CTS_MSK cpu_to_le32(1 << 2) /* 1: Expect ACK from receiving station @@ -1430,8 +1439,11 @@ struct iwl_rx_mpdu_res_start { * Set when Txing a block-ack request frame. Also set TX_CMD_FLG_ACK_MSK. */ #define TX_CMD_FLG_IMM_BA_RSP_MASK cpu_to_le32(1 << 6) -/* 1: Frame requires full Tx-Op protection. - * Set this if either RTS or CTS Tx Flag gets set. */ +/* + * 1: Frame requires full Tx-Op protection. + * Set this if either RTS or CTS Tx Flag gets set. + * used in 3945/4965, unused in 5000 series and after + */ #define TX_CMD_FLG_FULL_TXOP_PROT_MSK cpu_to_le32(1 << 7) /* Tx antenna selection field; used only for 3945, reserved (0) for 4965. -- 2.34.1