From 4f2d56c45fec7c15169599cab05e9f6df18769d0 Mon Sep 17 00:00:00 2001
From: Jan Altenberg <jan@linutronix.de>
Date: Mon, 21 Mar 2011 18:19:26 -0700
Subject: [PATCH] can: c_can: Do basic c_can configuration _before_ enabling
the interrupts
I ran into some trouble while testing the SocketCAN driver for the BOSCH
C_CAN controller. The interface is not correctly initialized, if I put
some CAN traffic on the line, _while_ the interface is being started
(which means: the interface doesn't come up correcty, if there's some RX
traffic while doing 'ifconfig can0 up').
The current implementation enables the controller interrupts _before_
doing the basic c_can configuration. I think, this should be done the
other way round.
The patch below fixes things for me.
Signed-off-by: Jan Altenberg <jan@linutronix.de>
Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/can/c_can/c_can.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index 14050786218a..110eda01843c 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -633,9 +633,6 @@ static void c_can_start(struct net_device *dev)
{
struct c_can_priv *priv = netdev_priv(dev);
- /* enable status change, error and module interrupts */
- c_can_enable_all_interrupts(priv, ENABLE_ALL_INTERRUPTS);
-
/* basic c_can configuration */
c_can_chip_config(dev);
@@ -643,6 +640,9 @@ static void c_can_start(struct net_device *dev)
/* reset tx helper pointers */
priv->tx_next = priv->tx_echo = 0;
+
+ /* enable status change, error and module interrupts */
+ c_can_enable_all_interrupts(priv, ENABLE_ALL_INTERRUPTS);
}
static void c_can_stop(struct net_device *dev)
--
2.34.1