From 5416d871136d7cc674c508889b8abbf2469dd115 Mon Sep 17 00:00:00 2001 From: Damien Lespiau Date: Fri, 14 Nov 2014 17:24:33 +0000 Subject: [PATCH] drm/i915/skl: Set the eDP link rate on DPLL0 On SKL DPLL0 is used to derive CDCLK but can also be used to drive an eDP port (as long as we don't want SSC). DPLL0 is special enough to not be handled by the shared DPLL framework (drives CDCLK, not supposed to enable the HDMI mode), So we need to compute the configuration separately from the other DPLLs. Note that we don't need to reprogram DPLL0 (which would mean bringing down CDCLK) to support the various eDP 1.3 link rates as they all share the same VCO (8100). Signed-off-by: Damien Lespiau Reviewed-by: Paulo Zanoni Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_ddi.c | 20 ++++++++++++++++++++ drivers/gpu/drm/i915/intel_dp.c | 31 ++++++++++++++++++++++++++++++- 2 files changed, 50 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c index 3e4c63cfa415..83eeecbaa4bb 100644 --- a/drivers/gpu/drm/i915/intel_ddi.c +++ b/drivers/gpu/drm/i915/intel_ddi.c @@ -1484,6 +1484,25 @@ static void intel_ddi_pre_enable(struct intel_encoder *intel_encoder) uint32_t dpll = crtc->config.ddi_pll_sel; uint32_t val; + /* + * DPLL0 is used for eDP and is the only "private" DPLL (as + * opposed to shared) on SKL + */ + if (type == INTEL_OUTPUT_EDP) { + WARN_ON(dpll != SKL_DPLL0); + + val = I915_READ(DPLL_CTRL1); + + val &= ~(DPLL_CTRL1_HDMI_MODE(dpll) | + DPLL_CTRL1_SSC(dpll) | + DPLL_CRTL1_LINK_RATE_MASK(dpll)); + val |= crtc->config.dpll_hw_state.ctrl1 << (dpll * 6); + + I915_WRITE(DPLL_CTRL1, val); + POSTING_READ(DPLL_CTRL1); + } + + /* DDI -> PLL mapping */ val = I915_READ(DPLL_CTRL2); val &= ~(DPLL_CTRL2_DDI_CLK_OFF(port) | @@ -1492,6 +1511,7 @@ static void intel_ddi_pre_enable(struct intel_encoder *intel_encoder) DPLL_CTRL2_DDI_SEL_OVERRIDE(port)); I915_WRITE(DPLL_CTRL2, val); + } else { WARN_ON(crtc->config.ddi_pll_sel == PORT_CLK_SEL_NONE); I915_WRITE(PORT_CLK_SEL(port), crtc->config.ddi_pll_sel); diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 7369e6f10117..4e49caa5a1b3 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1073,6 +1073,33 @@ intel_dp_connector_unregister(struct intel_connector *intel_connector) intel_connector_unregister(intel_connector); } +static void +skl_edp_set_pll_config(struct intel_crtc_config *pipe_config, int link_bw) +{ + u32 ctrl1; + + pipe_config->ddi_pll_sel = SKL_DPLL0; + pipe_config->dpll_hw_state.cfgcr1 = 0; + pipe_config->dpll_hw_state.cfgcr2 = 0; + + ctrl1 = DPLL_CTRL1_OVERRIDE(SKL_DPLL0); + switch (link_bw) { + case DP_LINK_BW_1_62: + ctrl1 |= DPLL_CRTL1_LINK_RATE(DPLL_CRTL1_LINK_RATE_810, + SKL_DPLL0); + break; + case DP_LINK_BW_2_7: + ctrl1 |= DPLL_CRTL1_LINK_RATE(DPLL_CRTL1_LINK_RATE_1350, + SKL_DPLL0); + break; + case DP_LINK_BW_5_4: + ctrl1 |= DPLL_CRTL1_LINK_RATE(DPLL_CRTL1_LINK_RATE_2700, + SKL_DPLL0); + break; + } + pipe_config->dpll_hw_state.ctrl1 = ctrl1; +} + static void hsw_dp_set_ddi_pll_sel(struct intel_crtc_config *pipe_config, int link_bw) { @@ -1250,7 +1277,9 @@ found: &pipe_config->dp_m2_n2); } - if (IS_HASWELL(dev) || IS_BROADWELL(dev)) + if (IS_SKYLAKE(dev) && is_edp(intel_dp)) + skl_edp_set_pll_config(pipe_config, intel_dp->link_bw); + else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) hsw_dp_set_ddi_pll_sel(pipe_config, intel_dp->link_bw); else intel_dp_set_clock(encoder, pipe_config, intel_dp->link_bw); -- 2.34.1