From 58c179674329b4d03a9d22df55d95cb0a8da5d85 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 15 May 2015 11:24:22 +0200 Subject: [PATCH] ARM: hisi: revert changes from hisi/hip04-dt branch This backs out all changes that were added in the hip04-dt branch after various boot problems were discovered in UEFI booting. Reported-by: Tyler Baker Cc: Wei Xu [khilman: minor changelog updates] Signed-off-by: Arnd Bergmann Signed-off-by: Kevin Hilman --- arch/arm/boot/dts/hip04-d01.dts | 27 ------- arch/arm/boot/dts/hip04.dtsi | 133 -------------------------------- 2 files changed, 160 deletions(-) diff --git a/arch/arm/boot/dts/hip04-d01.dts b/arch/arm/boot/dts/hip04-d01.dts index ba04dd5fba8b..40a9e33c2654 100644 --- a/arch/arm/boot/dts/hip04-d01.dts +++ b/arch/arm/boot/dts/hip04-d01.dts @@ -28,32 +28,5 @@ uart0: uart@4007000 { status = "ok"; }; - - nand: nand@4020000 { - nand-bus-width = <8>; - nand-ecc-mode = "hw"; - nand-ecc-strength = <16>; - nand-ecc-step-size = <1024>; - - partition@0 { - label = "nand_text"; - reg = <0x00000000 0x00400000>; - }; - - partition@00400000 { - label = "nand_monitor"; - reg = <0x00400000 0x00400000>; - }; - - partition@00800000 { - label = "nand_kernel"; - reg = <0x00800000 0x00800000>; - }; - - partition@01000000 { - label = "nand_fs"; - reg = <0x01000000 0x1f000000>; - }; - }; }; }; diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi index 6434b7f91329..44044f275115 100644 --- a/arch/arm/boot/dts/hip04.dtsi +++ b/arch/arm/boot/dts/hip04.dtsi @@ -269,139 +269,6 @@ interrupts = <0 372 4>; }; - gpio@4003000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,dw-apb-gpio"; - reg = <0x4003000 0x1000>; - - gpio3: gpio-controller@0 { - compatible = "snps,dw-apb-gpio-port"; - gpio-controller; - #gpio-cells = <2>; - snps,nr-gpios = <32>; - reg = <0>; - interrupt-parent = <&gic>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <0 392 4>; - }; - }; - - gpio@4002000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,dw-apb-gpio"; - reg = <0x4002000 0x1000>; - - gpio2: gpio-controller@0 { - compatible = "snps,dw-apb-gpio-port"; - gpio-controller; - #gpio-cells = <2>; - snps,nr-gpios = <32>; - reg = <0>; - interrupt-parent = <&gic>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <0 391 4>; - }; - }; - - gpio@4001000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,dw-apb-gpio"; - reg = <0x4001000 0x1000>; - - gpio1: gpio-controller@0 { - compatible = "snps,dw-apb-gpio-port"; - gpio-controller; - #gpio-cells = <2>; - snps,nr-gpios = <32>; - reg = <0>; - interrupt-parent = <&gic>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <0 390 4>; - }; - }; - - gpio@4000000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,dw-apb-gpio"; - reg = <0x4000000 0x1000>; - - gpio0: gpio-controller@0 { - compatible = "snps,dw-apb-gpio-port"; - gpio-controller; - #gpio-cells = <2>; - snps,nr-gpios = <32>; - reg = <0>; - interrupt-parent = <&gic>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <0 389 4>; - }; - }; - - nand: nand@4020000 { - compatible = "hisilicon,504-nfc"; - reg = <0x4020000 0x10000>, <0x5000000 0x1000>; - interrupts = <0 379 4>; - #address-cells = <1>; - #size-cells = <1>; - }; - - mdio { - compatible = "hisilicon,hip04-mdio"; - reg = <0x28f1000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - - phy0: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; - marvell,reg-init = <18 0x14 0 0x8001>; - }; - - phy1: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <1>; - marvell,reg-init = <18 0x14 0 0x8001>; - }; - }; - - ppe: ppe@28c0000 { - compatible = "hisilicon,hip04-ppe", "syscon"; - reg = <0x28c0000 0x10000>; - }; - - fe: ethernet@28b0000 { - compatible = "hisilicon,hip04-mac"; - reg = <0x28b0000 0x10000>; - interrupts = <0 413 4>; - phy-mode = "mii"; - port-handle = <&ppe 31 0>; - }; - - ge0: ethernet@2800000 { - compatible = "hisilicon,hip04-mac"; - reg = <0x2800000 0x10000>; - interrupts = <0 402 4>; - phy-mode = "sgmii"; - port-handle = <&ppe 0 1>; - phy-handle = <&phy0>; - }; - - ge8: ethernet@2880000 { - compatible = "hisilicon,hip04-mac"; - reg = <0x2880000 0x10000>; - interrupts = <0 410 4>; - phy-mode = "sgmii"; - port-handle = <&ppe 8 2>; - phy-handle = <&phy1>; - }; }; etb@0,e3c42000 { -- 2.34.1