From 5ba5b89ab6e68b309d1fcabb4be0d0b521aff3db Mon Sep 17 00:00:00 2001 From: Lidza Louina Date: Wed, 21 Aug 2013 11:08:06 -0400 Subject: [PATCH] staging: dgnc: neo.c: removes trailing whitespace This patch removes trailing whitespace in the dgnc_neo.c file. Signed-off-by: Lidza Louina Signed-off-by: Greg Kroah-Hartman --- drivers/staging/dgnc/dgnc_neo.c | 46 ++++++++++++++++----------------- 1 file changed, 23 insertions(+), 23 deletions(-) diff --git a/drivers/staging/dgnc/dgnc_neo.c b/drivers/staging/dgnc/dgnc_neo.c index 9ac71497edf4..9ca143ec8dba 100644 --- a/drivers/staging/dgnc/dgnc_neo.c +++ b/drivers/staging/dgnc/dgnc_neo.c @@ -6,12 +6,12 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2, or (at your option) * any later version. - * + * * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR + * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the + * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR * PURPOSE. See the GNU General Public License for more details. - * + * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. @@ -97,7 +97,7 @@ struct board_ops dgnc_neo_ops = { .get_uart_bytes_left = neo_get_uart_bytes_left, .send_immediate_char = neo_send_immediate_char }; - + static uint dgnc_offset_table[8] = { 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80 }; @@ -131,7 +131,7 @@ static inline void neo_set_cts_flow_control(struct channel_t *ch) efr |= (UART_17158_EFR_ECB | UART_17158_EFR_CTSDSR); - /* Turn off auto Xon flow control */ + /* Turn off auto Xon flow control */ efr &= ~(UART_17158_EFR_IXON); /* Why? Becuz Exar's spec says we have to zero it out before setting it */ @@ -487,7 +487,7 @@ static inline void neo_parse_isr(struct board_t *brd, uint port) DGNC_UNLOCK(ch->ch_lock, lock_flags); } DPR_INTR(("Port %d. XON detected in incoming data\n", port)); - } + } else if (cause == UART_17158_XOFF_DETECT) { if (!(brd->channels[port]->ch_flags & CH_STOP)) { DGNC_LOCK(ch->ch_lock, lock_flags); @@ -665,7 +665,7 @@ static void neo_param(struct tty_struct *tty) return; } - ch = un->un_ch; + ch = un->un_ch; if (!ch || ch->magic != DGNC_CHANNEL_MAGIC) { return; } @@ -677,7 +677,7 @@ static void neo_param(struct tty_struct *tty) DPR_PARAM(("param start: tdev: %x cflags: %x oflags: %x iflags: %x\n", ch->ch_tun.un_dev, ch->ch_c_cflag, ch->ch_c_oflag, ch->ch_c_iflag)); - + /* * If baud rate is zero, flush queues, and set mval to drop DTR. */ @@ -754,7 +754,7 @@ static void neo_param(struct tty_struct *tty) jindex = baud; if ((iindex >= 0) && (iindex < 4) && (jindex >= 0) && (jindex < 16)) { - baud = bauds[iindex][jindex]; + baud = bauds[iindex][jindex]; } else { DPR_IOCTL(("baud indices were out of range (%d)(%d)", iindex, jindex)); @@ -787,12 +787,12 @@ static void neo_param(struct tty_struct *tty) lcr |= UART_LCR_EPAR; } - /* + /* * Not all platforms support mark/space parity, * so this will hide behind an ifdef. */ #ifdef CMSPAR - if (ch->ch_c_cflag & CMSPAR) + if (ch->ch_c_cflag & CMSPAR) lcr |= UART_LCR_SPAR; #endif @@ -886,7 +886,7 @@ static void neo_param(struct tty_struct *tty) neo_set_no_input_flow_control(ch); else neo_set_ixoff_flow_control(ch); - } + } else { neo_set_no_input_flow_control(ch); } @@ -1125,7 +1125,7 @@ static irqreturn_t neo_intr(int irq, void *voidbrd) */ neo_parse_isr(brd, port); continue; - + default: /* * The UART triggered us with a bogus interrupt type. @@ -1184,7 +1184,7 @@ static void neo_copy_data_from_uart_to_queue(struct channel_t *ch) uchar linestatus = 0; uchar error_mask = 0; int n = 0; - int total = 0; + int total = 0; ushort head; ushort tail; ulong lock_flags; @@ -1243,7 +1243,7 @@ static void neo_copy_data_from_uart_to_queue(struct channel_t *ch) */ total = min(total, qleft); - while (total > 0) { + while (total > 0) { /* * Grab the linestatus register, we need to check @@ -1414,7 +1414,7 @@ static int neo_drain(struct tty_struct *tty, uint seconds) return (-ENXIO); } - ch = un->un_ch; + ch = un->un_ch; if (!ch || ch->magic != DGNC_CHANNEL_MAGIC) { return (-ENXIO); } @@ -1443,7 +1443,7 @@ static int neo_drain(struct tty_struct *tty, uint seconds) return (rc); } - + /* * Flush the WRITE FIFO on the Neo. @@ -1727,8 +1727,8 @@ static void neo_parse_modem(struct channel_t *ch, uchar signals) ch->ch_portnum, !!((ch->ch_mistat | ch->ch_mostat) & UART_MCR_DTR), !!((ch->ch_mistat | ch->ch_mostat) & UART_MCR_RTS), - !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_CTS), - !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_DSR), + !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_CTS), + !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_DSR), !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_RI), !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_DCD))); } @@ -1792,7 +1792,7 @@ static void neo_uart_init(struct channel_t *ch) writeb(0, &ch->ch_neo_uart->ier); writeb(0, &ch->ch_neo_uart->efr); writeb(UART_EFR_ECB, &ch->ch_neo_uart->efr); - + /* Clear out UART and FIFO */ readb(&ch->ch_neo_uart->txrx); @@ -1829,7 +1829,7 @@ static uint neo_get_uart_bytes_left(struct channel_t *ch) /* We must cache the LSR as some of the bits get reset once read... */ ch->ch_cached_lsr |= lsr; - + /* Determine whether the Transmitter is empty or not */ if (!(lsr & UART_LSR_TEMT)) { if (ch->ch_flags & CH_TX_FIFO_EMPTY) { @@ -1885,7 +1885,7 @@ static void neo_send_break(struct channel_t *ch, int msecs) /* * neo_send_immediate_char. * - * Sends a specific character as soon as possible to the UART, + * Sends a specific character as soon as possible to the UART, * jumping over any bytes that might be in the write queue. * * The channel lock MUST be held by the calling function. -- 2.34.1