From 5dad5ec540089dd2b100b0e7e91df7a7437ae2d3 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Fri, 15 Mar 2013 14:31:57 +0100 Subject: [PATCH] Documentation: dt: gpio-omap: Move interrupt-controller from #interrupt-cells description The binding documentation for the OMAP GPIO controller has the "#interrupt-cells" property listed before "#interrupt-controller" property but its description after. This is confusing so we move "#interrupt-cells" after the "interrupt-controller" property so is followed by its description. While being there, change the properties order to be consistent with Documentation/devicetree/bindings/interrupt-controller/interrupts.txt and Documentation/devicetree/bindings/gpio/gpio.txt. According with these docs, the order of the properties for a gpio-omap device node should be: gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; Reported-by: Stephen Warren Signed-off-by: Javier Martinez Canillas Acked-by: Jon Hunter Signed-off-by: Benoit Cousson --- Documentation/devicetree/bindings/gpio/gpio-omap.txt | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/Documentation/devicetree/bindings/gpio/gpio-omap.txt b/Documentation/devicetree/bindings/gpio/gpio-omap.txt index bff51a2fee1e..a56e3a53a360 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-omap.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-omap.txt @@ -5,12 +5,12 @@ Required properties: - "ti,omap2-gpio" for OMAP2 controllers - "ti,omap3-gpio" for OMAP3 controllers - "ti,omap4-gpio" for OMAP4 controllers +- gpio-controller : Marks the device node as a GPIO controller. - #gpio-cells : Should be two. - first cell is the pin number - second cell is used to specify optional parameters (unused) -- gpio-controller : Marks the device node as a GPIO controller. +- interrupt-controller: Mark the device node as an interrupt controller. - #interrupt-cells : Should be 2. -- interrupt-controller: Mark the device node as an interrupt controller The first cell is the GPIO number. The second cell is used to specify flags: bits[3:0] trigger type and level flags: @@ -29,8 +29,8 @@ Example: gpio4: gpio4 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio4"; - #gpio-cells = <2>; gpio-controller; - #interrupt-cells = <2>; + #gpio-cells = <2>; interrupt-controller; + #interrupt-cells = <2>; }; -- 2.34.1