From 5e809e50eb39284188515b5950d09a63856bb0b1 Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Fri, 27 Sep 2013 00:11:45 +0900 Subject: [PATCH] staging: rtl8188eu: Fix typo in rtl8188eu/hal Correct spelling typo in rtl8188eu/hal Signed-off-by: Masanari Iida Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8188eu/hal/HalPwrSeqCmd.c | 2 +- drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c | 8 ++++---- drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c | 4 ++-- drivers/staging/rtl8188eu/hal/rtl8188e_phycfg.c | 8 ++++---- drivers/staging/rtl8188eu/hal/rtl8188e_rf6052.c | 10 +++++----- drivers/staging/rtl8188eu/hal/rtl8188eu_xmit.c | 2 +- drivers/staging/rtl8188eu/hal/usb_halinit.c | 10 +++++----- 7 files changed, 22 insertions(+), 22 deletions(-) diff --git a/drivers/staging/rtl8188eu/hal/HalPwrSeqCmd.c b/drivers/staging/rtl8188eu/hal/HalPwrSeqCmd.c index e913a22a6426..5700dbce5b8c 100644 --- a/drivers/staging/rtl8188eu/hal/HalPwrSeqCmd.c +++ b/drivers/staging/rtl8188eu/hal/HalPwrSeqCmd.c @@ -85,7 +85,7 @@ u8 HalPwrSeqCmdParsing(struct adapter *padapter, u8 cut_vers, u8 fab_vers, value &= ~(GET_PWR_CFG_MASK(pwrcfgcmd)); value |= (GET_PWR_CFG_VALUE(pwrcfgcmd) & GET_PWR_CFG_MASK(pwrcfgcmd)); - /* Write the value back to sytem register */ + /* Write the value back to system register */ rtw_write8(padapter, offset, value); break; case PWR_CMD_POLLING: diff --git a/drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c b/drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c index 8c8587754517..0b0c68c9865c 100644 --- a/drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c +++ b/drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c @@ -484,7 +484,7 @@ static void ConstructProbeRsp(struct adapter *adapt, u8 *pframe, u32 *pLength, u *pLength = pktlen; } -/* To check if reserved page content is destroyed by beacon beacuse beacon is too large. */ +/* To check if reserved page content is destroyed by beacon because beacon is too large. */ /* 2010.06.23. Added by tynli. */ void CheckFwRsvdPageContent(struct adapter *Adapter) { @@ -496,9 +496,9 @@ void CheckFwRsvdPageContent(struct adapter *Adapter) /* (1)Beacon, (2)Ps-poll, (3)Null data, (4)ProbeRsp. */ /* Input: */ /* bDLFinished - false: At the first time we will send all the packets as a large packet to Hw, */ -/* so we need to set the packet length to total lengh. */ +/* so we need to set the packet length to total length. */ /* true: At the second time, we should send the first packet (default:beacon) */ -/* to Hw again and set the lengh in descriptor to the real beacon lengh. */ +/* to Hw again and set the length in descriptor to the real beacon length. */ /* 2009.10.15 by tynli. */ static void SetFwRsvdPagePkt(struct adapter *adapt, bool bDLFinished) { @@ -671,7 +671,7 @@ _func_enter_; DBG_88E("%s: 1 Download RSVD success! DLBcnCount:%u, poll:%u\n", __func__, DLBcnCount, poll); /* */ /* We just can send the reserved page twice during the time that Tx thread is stopped (e.g. pnpsetpower) */ - /* becuase we need to free the Tx BCN Desc which is used by the first reserved page packet. */ + /* because we need to free the Tx BCN Desc which is used by the first reserved page packet. */ /* At run time, we cannot get the Tx Desc until it is released in TxHandleInterrupt() so we will return */ /* the beacon TCB in the following code. 2011.11.23. by tynli. */ /* */ diff --git a/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c b/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c index 390ab39591e6..51f03c3b53a4 100644 --- a/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c +++ b/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c @@ -1651,7 +1651,7 @@ hal_EfusePgCheckAvailableAddr( { u16 efuse_max_available_len = 0; - /* Change to check TYPE_EFUSE_MAP_LEN , beacuse 8188E raw 256, logic map over 256. */ + /* Change to check TYPE_EFUSE_MAP_LEN , because 8188E raw 256, logic map over 256. */ EFUSE_GetEfuseDefinition(pAdapter, EFUSE_WIFI, TYPE_EFUSE_MAP_LEN, (void *)&efuse_max_available_len, false); if (Efuse_GetCurrentSize(pAdapter, efuseType, bPseudoTest) >= efuse_max_available_len) @@ -2098,7 +2098,7 @@ static u8 Hal_GetChnlGroup88E(u8 chnl, u8 *pGroup) if (chnl <= 14) { bIn24G = true; - if (chnl < 3) /* Chanel 1-2 */ + if (chnl < 3) /* Channel 1-2 */ *pGroup = 0; else if (chnl < 6) /* Channel 3-5 */ *pGroup = 1; diff --git a/drivers/staging/rtl8188eu/hal/rtl8188e_phycfg.c b/drivers/staging/rtl8188eu/hal/rtl8188e_phycfg.c index ff468a68e327..68bb96d83c81 100644 --- a/drivers/staging/rtl8188eu/hal/rtl8188e_phycfg.c +++ b/drivers/staging/rtl8188eu/hal/rtl8188e_phycfg.c @@ -559,7 +559,7 @@ static int phy_BB8188E_Config_ParaFile(struct adapter *Adapter) /* */ /* 1. Read PHY_REG.TXT BB INIT!! */ - /* We will seperate as 88C / 92C according to chip version */ + /* We will separate as 88C / 92C according to chip version */ /* */ if (HAL_STATUS_FAILURE == ODM_ConfigBBWithHeaderFile(&pHalData->odmpriv, CONFIG_BB_PHY_REG)) rtStatus = _FAIL; @@ -685,7 +685,7 @@ static u8 phy_DbmToTxPwrIdx(struct adapter *Adapter, enum wireless_mode Wireless /* */ /* Tested by MP, we found that CCK Index 0 equals to 8dbm, OFDM legacy equals to */ - /* 3dbm, and OFDM HT equals to 0dbm repectively. */ + /* 3dbm, and OFDM HT equals to 0dbm respectively. */ /* Note: */ /* The mapping may be different by different NICs. Do not use this formula for what needs accurate result. */ /* By Bruce, 2008-01-29. */ @@ -1006,12 +1006,12 @@ _PHY_SetBWMode92C( switch (pHalData->CurrentChannelBW) { case HT_CHANNEL_WIDTH_20: regBwOpMode |= BW_OPMODE_20MHZ; - /* 2007/02/07 Mark by Emily becasue we have not verify whether this register works */ + /* 2007/02/07 Mark by Emily because we have not verify whether this register works */ rtw_write8(Adapter, REG_BWOPMODE, regBwOpMode); break; case HT_CHANNEL_WIDTH_40: regBwOpMode &= ~BW_OPMODE_20MHZ; - /* 2007/02/07 Mark by Emily becasue we have not verify whether this register works */ + /* 2007/02/07 Mark by Emily because we have not verify whether this register works */ rtw_write8(Adapter, REG_BWOPMODE, regBwOpMode); regRRSR_RSC = (regRRSR_RSC&0x90) | (pHalData->nCur40MhzPrimeSC<<5); rtw_write8(Adapter, REG_RRSR+2, regRRSR_RSC); diff --git a/drivers/staging/rtl8188eu/hal/rtl8188e_rf6052.c b/drivers/staging/rtl8188eu/hal/rtl8188e_rf6052.c index bfdf9b3ce77f..299e03e3daf6 100644 --- a/drivers/staging/rtl8188eu/hal/rtl8188e_rf6052.c +++ b/drivers/staging/rtl8188eu/hal/rtl8188e_rf6052.c @@ -181,7 +181,7 @@ i * Currently, we cannot fully disable driver dynamic * tx power mechanism because it is referenced by BT * coexist mechanism. * In the future, two mechanism shall be separated from - * each other and maintained independantly. */ + * each other and maintained independently. */ if (pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Level1) { TxAGC[RF_PATH_A] = 0x10101010; TxAGC[RF_PATH_B] = 0x10101010; @@ -216,11 +216,11 @@ i * Currently, we cannot fully disable driver dynamic ODM_TxPwrTrackAdjust88E(&pHalData->odmpriv, 1, &direction, &pwrtrac_value); if (direction == 1) { - /* Increase TX pwoer */ + /* Increase TX power */ TxAGC[0] += pwrtrac_value; TxAGC[1] += pwrtrac_value; } else if (direction == 2) { - /* Decrease TX pwoer */ + /* Decrease TX power */ TxAGC[0] -= pwrtrac_value; TxAGC[1] -= pwrtrac_value; } @@ -292,7 +292,7 @@ static void get_rx_power_val_by_reg(struct adapter *Adapter, u8 Channel, if (pHalData->pwrGroupCnt == 1) chnlGroup = 0; if (pHalData->pwrGroupCnt >= pHalData->PGMaxGroup) { - if (Channel < 3) /* Chanel 1-2 */ + if (Channel < 3) /* Channel 1-2 */ chnlGroup = 0; else if (Channel < 6) /* Channel 3-5 */ chnlGroup = 1; @@ -349,7 +349,7 @@ static void get_rx_power_val_by_reg(struct adapter *Adapter, u8 Channel, } /* 20100427 Joseph: Driver dynamic Tx power shall not affect Tx power. It shall be determined by power training mechanism. */ /* Currently, we cannot fully disable driver dynamic tx power mechanism because it is referenced by BT coexist mechanism. */ -/* In the future, two mechanism shall be separated from each other and maintained independantly. Thanks for Lanhsin's reminder. */ +/* In the future, two mechanism shall be separated from each other and maintained independently. Thanks for Lanhsin's reminder. */ /* 92d do not need this */ if (pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Level1) writeVal = 0x14141414; diff --git a/drivers/staging/rtl8188eu/hal/rtl8188eu_xmit.c b/drivers/staging/rtl8188eu/hal/rtl8188eu_xmit.c index bd8a9ae5d077..8f43f4966f22 100644 --- a/drivers/staging/rtl8188eu/hal/rtl8188eu_xmit.c +++ b/drivers/staging/rtl8188eu/hal/rtl8188eu_xmit.c @@ -332,7 +332,7 @@ static s32 update_txdesc(struct xmit_frame *pxmitframe, u8 *pmem, s32 sz, u8 bag /* 2009.11.05. tynli_test. Suggested by SD4 Filen for FW LPS. */ /* (1) The sequence number of each non-Qos frame / broadcast / multicast / */ - /* mgnt frame should be controled by Hw because Fw will also send null data */ + /* mgnt frame should be controlled by Hw because Fw will also send null data */ /* which we cannot control when Fw LPS enable. */ /* --> default enable non-Qos data sequense number. 2010.06.23. by tynli. */ /* (2) Enable HW SEQ control for beacon packet, because we use Hw beacon. */ diff --git a/drivers/staging/rtl8188eu/hal/usb_halinit.c b/drivers/staging/rtl8188eu/hal/usb_halinit.c index 5e656ce45407..cca973211b2f 100644 --- a/drivers/staging/rtl8188eu/hal/usb_halinit.c +++ b/drivers/staging/rtl8188eu/hal/usb_halinit.c @@ -464,7 +464,7 @@ static void _InitRetryFunction(struct adapter *Adapter) /*----------------------------------------------------------------------------- * Function: usb_AggSettingTxUpdate() * - * Overview: Seperate TX/RX parameters update independent for TP detection and + * Overview: Separate TX/RX parameters update independent for TP detection and * dynamic TX/RX aggreagtion parameters update. * * Input: struct adapter * @@ -473,7 +473,7 @@ static void _InitRetryFunction(struct adapter *Adapter) * * Revised History: * When Who Remark - * 12/10/2010 MHC Seperate to smaller function. + * 12/10/2010 MHC Separate to smaller function. * *---------------------------------------------------------------------------*/ static void usb_AggSettingTxUpdate(struct adapter *Adapter) @@ -496,7 +496,7 @@ static void usb_AggSettingTxUpdate(struct adapter *Adapter) /*----------------------------------------------------------------------------- * Function: usb_AggSettingRxUpdate() * - * Overview: Seperate TX/RX parameters update independent for TP detection and + * Overview: Separate TX/RX parameters update independent for TP detection and * dynamic TX/RX aggreagtion parameters update. * * Input: struct adapter * @@ -505,7 +505,7 @@ static void usb_AggSettingTxUpdate(struct adapter *Adapter) * * Revised History: * When Who Remark - * 12/10/2010 MHC Seperate to smaller function. + * 12/10/2010 MHC Separate to smaller function. * *---------------------------------------------------------------------------*/ static void @@ -847,7 +847,7 @@ _func_enter_; /* */ /* Init CR MACTXEN, MACRXEN after setting RxFF boundary REG_TRXFF_BNDY to patch */ - /* Hw bug which Hw initials RxFF boundry size to a value which is larger than the real Rx buffer size in 88E. */ + /* Hw bug which Hw initials RxFF boundary size to a value which is larger than the real Rx buffer size in 88E. */ /* */ /* Enable MACTXEN/MACRXEN block */ value16 = rtw_read16(Adapter, REG_CR); -- 2.34.1