From 604bb229b5269747e5763efe05726b080276d77f Mon Sep 17 00:00:00 2001 From: Ashish Chavan Date: Fri, 27 Apr 2012 16:44:04 +0530 Subject: [PATCH] ASoC: da7210: Minor bugfix for non pll slave mode This patch fixes a bug discovered during testing of non pll slave mode. Due to the bug chip was not getting correctly configured and as a result there was no sound output while playback. After applying this patch, both pll and non pll modes work fine. Signed-off-by: Ashish Chavan Signed-off-by: David Dajun Chen Signed-off-by: Mark Brown --- sound/soc/codecs/da7210.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/sound/soc/codecs/da7210.c b/sound/soc/codecs/da7210.c index f92d1f777757..10f52ff14daa 100644 --- a/sound/soc/codecs/da7210.c +++ b/sound/soc/codecs/da7210.c @@ -1159,8 +1159,9 @@ static int da7210_probe(struct snd_soc_codec *codec) /* Enable Aux2 */ snd_soc_write(codec, DA7210_AUX2, DA7210_AUX2_EN); - /* Set PLL Master clock range 10-20 MHz */ - snd_soc_write(codec, DA7210_PLL_DIV3, DA7210_MCLK_RANGE_10_20_MHZ); + /* Set PLL Master clock range 10-20 MHz, enable PLL bypass */ + snd_soc_write(codec, DA7210_PLL_DIV3, DA7210_MCLK_RANGE_10_20_MHZ | + DA7210_PLL_BYP); /* Diable PLL and bypass it */ snd_soc_write(codec, DA7210_PLL, DA7210_PLL_FS_48000); @@ -1191,8 +1192,8 @@ static struct reg_default da7210_regmap_i2c_patch[] = { /* System controller master disable */ { DA7210_STARTUP1, 0x00 }, - /* make sure that DA7210 use bypass mode before start up */ - { DA7210_PLL_DIV3, DA7210_MCLK_RANGE_10_20_MHZ | DA7210_PLL_BYP }, + /* Set PLL Master clock range 10-20 MHz */ + { DA7210_PLL_DIV3, DA7210_MCLK_RANGE_10_20_MHZ }, /* to unlock */ { DA7210_A_HID_UNLOCK, 0x8B}, @@ -1290,8 +1291,8 @@ static struct reg_default da7210_regmap_spi_patch[] = { /* System controller master disable */ { DA7210_STARTUP1, 0x00 }, - /* make sure that DA7210 use bypass mode before start up */ - { DA7210_PLL_DIV3, DA7210_MCLK_RANGE_10_20_MHZ | DA7210_PLL_BYP }, + /* Set PLL Master clock range 10-20 MHz */ + { DA7210_PLL_DIV3, DA7210_MCLK_RANGE_10_20_MHZ }, /* to set PAGE1 of SPI register space */ { DA7210_PAGE_CONTROL, 0x80 }, -- 2.34.1