From 61885f95f07ee2a10d5165470e091bfec7fdc4ff Mon Sep 17 00:00:00 2001 From: Jonas Gorski Date: Fri, 10 Apr 2015 10:28:46 +0000 Subject: [PATCH] b53: define registers available and needed on BCM5301X MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit They are also present on some BCM63xx switches. Signed-off-by: Rafał Miłecki SVN-Revision: 45355 --- .../files/drivers/net/phy/b53/b53_regs.h | 33 +++++++++++++++++++ 1 file changed, 33 insertions(+) diff --git a/target/linux/generic/files/drivers/net/phy/b53/b53_regs.h b/target/linux/generic/files/drivers/net/phy/b53/b53_regs.h index 4899cc4a2c..7e50bb4e67 100644 --- a/target/linux/generic/files/drivers/net/phy/b53/b53_regs.h +++ b/target/linux/generic/files/drivers/net/phy/b53/b53_regs.h @@ -50,6 +50,9 @@ /* Jumbo Frame Registers */ #define B53_JUMBO_PAGE 0x40 +/* CFP Configuration Registers Page */ +#define B53_CFP_PAGE 0xa1 + /************************************************************************* * Control Page registers *************************************************************************/ @@ -99,6 +102,25 @@ #define B53_MC_FLOOD_MASK 0x34 #define B53_IPMC_FLOOD_MASK 0x36 +/* + * Override Ports 0-7 State on devices with xMII interfaces (8 bit) + * + * For port 8 still use B53_PORT_OVERRIDE_CTRL + * Please note that not all ports are available on every hardware, e.g. BCM5301X + * don't include overriding port 6, BCM63xx also have some limitations. + */ +#define B53_GMII_PORT_OVERRIDE_CTRL(i) (0x58 + i) +#define GMII_PO_LINK BIT(0) +#define GMII_PO_FULL_DUPLEX BIT(1) /* 0 = Half Duplex */ +#define GMII_PO_SPEED_S 2 +#define GMII_PO_SPEED_10M (0 << GMII_PO_SPEED_S) +#define GMII_PO_SPEED_100M (1 << GMII_PO_SPEED_S) +#define GMII_PO_SPEED_1000M (2 << GMII_PO_SPEED_S) +#define GMII_PO_RX_FLOW BIT(4) +#define GMII_PO_TX_FLOW BIT(5) +#define GMII_PO_EN BIT(6) /* Use the register contents */ +#define GMII_PO_SPEED_2000M BIT(7) /* BCM5301X only, requires setting 1000M */ + /* Software reset register (8 bit) */ #define B53_SOFTRESET 0x79 @@ -156,6 +178,10 @@ #define GC_FRM_MGMT_PORT_04 0x00 #define GC_FRM_MGMT_PORT_MII 0x80 +/* Broadcom Header control register (8 bit) */ +#define B53_BRCM_HDR 0x03 +#define BRCM_HDR_EN BIT(0) /* Enable tagging on IMP port */ + /* Device ID register (8 or 32 bit) */ #define B53_DEVICE_ID 0x30 @@ -310,4 +336,11 @@ #define JMS_MIN_SIZE 1518 #define JMS_MAX_SIZE 9724 +/************************************************************************* + * CFP Configuration Page Registers + *************************************************************************/ + +/* CFP Control Register with ports map (8 bit) */ +#define B53_CFP_CTRL 0x00 + #endif /* !__B53_REGS_H */ -- 2.34.1