From 6520700fdb2cc07ed86e893a2e88c491e04d6b75 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Thu, 27 Dec 2012 14:29:05 -0700 Subject: [PATCH] ARM: bcm2835 rpi: remove hard-coded memreserve from DT The Raspberry Pi has either 256MB or 512MB of RAM. However, a portion is reserved for use by the VideoCore co-processor. The RPi DT contained a /memreserve/ statement to reserve that RAM. However, the exact amount of RAM used by the VideoCore is dynamic at boot-time; a firmware config file specifies the amount. As such, we can't hard-code the size in the DT. Remove the /memreserve/ statement. The bootloader is expected to adjust the /memory properties to reflect the RAM size the ARM CPU can use. Upstream U-Boot certainly does this, although I'm not sure that the basic firmware does if it boots the kernel directly; users may need to manually adjust their DT if not using U-Boot. Signed-off-by: Stephen Warren --- arch/arm/boot/dts/bcm2835-rpi-b.dts | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts index 9b72054a0bc0..6ff26f99cacd 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts @@ -1,5 +1,4 @@ /dts-v1/; -/memreserve/ 0x0c000000 0x04000000; /include/ "bcm2835.dtsi" / { -- 2.34.1