From 66d2cc95d14b5d750a9c58209fddb62eb139eaab Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sat, 3 Sep 2005 15:55:50 -0700 Subject: [PATCH] [PATCH] ppc32: Added PCI support MPC83xx Adds support for the two PCI busses on MPC83xx and the MPC834x SYS/PIBS reference board. The code initializes PCI inbound/outbound windows, allocates and registers PCI memory/io space. Be aware that setup of the PCI buses on the PIBs board is expected to be done by the firmware. Signed-off-by: Tony Li Signed-off-by: Kumar Gala Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc/Kconfig | 10 ++ arch/ppc/platforms/83xx/mpc834x_sys.c | 35 +++- arch/ppc/platforms/83xx/mpc834x_sys.h | 40 +++-- arch/ppc/syslib/ppc83xx_pci.h | 151 ++++++++++++++++ arch/ppc/syslib/ppc83xx_setup.c | 250 +++++++++++++++++++++++++- arch/ppc/syslib/ppc83xx_setup.h | 19 +- 6 files changed, 474 insertions(+), 31 deletions(-) create mode 100644 arch/ppc/syslib/ppc83xx_pci.h diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index 9b849e281b45..36dee0ff5ca0 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -495,6 +495,11 @@ config WINCEPT MPC821 PowerPC, introduced in 1998 and designed to be used in thin-client machines. Say Y to support it directly. + Be aware that PCI buses can only function when SYS board is plugged + into the PIB (Platform IO Board) board from Freescale which provide + 3 PCI slots. The PIBs PCI initialization is the bootloader's + responsiblilty. + endchoice choice @@ -1153,6 +1158,11 @@ config PCI_DOMAINS bool default PCI +config MPC83xx_PCI2 + bool " Supprt for 2nd PCI host controller" + depends on PCI && MPC834x + default y if MPC834x_SYS + config PCI_QSPAN bool "QSpan PCI" depends on !4xx && !CPM2 && 8xx diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.c b/arch/ppc/platforms/83xx/mpc834x_sys.c index ddd04d4c1ea9..b38a851a64ec 100644 --- a/arch/ppc/platforms/83xx/mpc834x_sys.c +++ b/arch/ppc/platforms/83xx/mpc834x_sys.c @@ -62,9 +62,29 @@ extern unsigned long total_memory; /* in mm/init */ unsigned char __res[sizeof (bd_t)]; #ifdef CONFIG_PCI -#error "PCI is not supported" -/* NEED mpc83xx_map_irq & mpc83xx_exclude_device - see platforms/85xx/mpc85xx_ads_common.c */ +int +mpc83xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) +{ + static char pci_irq_table[][4] = + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + {PIRQA, PIRQB, PIRQC, PIRQD}, /* idsel 0x11 */ + {PIRQC, PIRQD, PIRQA, PIRQB}, /* idsel 0x12 */ + {PIRQD, PIRQA, PIRQB, PIRQC} /* idsel 0x13 */ + }; + + const long min_idsel = 0x11, max_idsel = 0x13, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; +} + +int +mpc83xx_exclude_device(u_char bus, u_char devfn) +{ + return PCIBIOS_SUCCESSFUL; +} #endif /* CONFIG_PCI */ /* ************************************************************************ @@ -88,7 +108,7 @@ mpc834x_sys_setup_arch(void) #ifdef CONFIG_PCI /* setup PCI host bridges */ - mpc83xx_sys_setup_hose(); + mpc83xx_setup_hose(); #endif mpc83xx_early_serial_map(); @@ -175,10 +195,17 @@ mpc834x_sys_init_IRQ(void) IRQ_SENSE_LEVEL, /* EXT 1 */ IRQ_SENSE_LEVEL, /* EXT 2 */ 0, /* EXT 3 */ +#ifdef CONFIG_PCI + IRQ_SENSE_LEVEL, /* EXT 4 */ + IRQ_SENSE_LEVEL, /* EXT 5 */ + IRQ_SENSE_LEVEL, /* EXT 6 */ + IRQ_SENSE_LEVEL, /* EXT 7 */ +#else 0, /* EXT 4 */ 0, /* EXT 5 */ 0, /* EXT 6 */ 0, /* EXT 7 */ +#endif }; ipic_init(binfo->bi_immr_base + 0x00700, 0, MPC83xx_IPIC_IRQ_OFFSET, senses, 8); diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.h b/arch/ppc/platforms/83xx/mpc834x_sys.h index a2f6e49d7151..1584cd77a9ef 100644 --- a/arch/ppc/platforms/83xx/mpc834x_sys.h +++ b/arch/ppc/platforms/83xx/mpc834x_sys.h @@ -26,7 +26,7 @@ #define VIRT_IMMRBAR ((uint)0xfe000000) #define BCSR_PHYS_ADDR ((uint)0xf8000000) -#define BCSR_SIZE ((uint)(32 * 1024)) +#define BCSR_SIZE ((uint)(128 * 1024)) #define BCSR_MISC_REG2_OFF 0x07 #define BCSR_MISC_REG2_PORESET 0x01 @@ -34,23 +34,25 @@ #define BCSR_MISC_REG3_OFF 0x08 #define BCSR_MISC_REG3_CNFLOCK 0x80 -#ifdef CONFIG_PCI -/* PCI interrupt controller */ -#define PIRQA MPC83xx_IRQ_IRQ4 -#define PIRQB MPC83xx_IRQ_IRQ5 -#define PIRQC MPC83xx_IRQ_IRQ6 -#define PIRQD MPC83xx_IRQ_IRQ7 - -#define MPC834x_SYS_PCI1_LOWER_IO 0x00000000 -#define MPC834x_SYS_PCI1_UPPER_IO 0x00ffffff - -#define MPC834x_SYS_PCI1_LOWER_MEM 0x80000000 -#define MPC834x_SYS_PCI1_UPPER_MEM 0x9fffffff - -#define MPC834x_SYS_PCI1_IO_BASE 0xe2000000 -#define MPC834x_SYS_PCI1_MEM_OFFSET 0x00000000 - -#define MPC834x_SYS_PCI1_IO_SIZE 0x01000000 -#endif /* CONFIG_PCI */ +#define PIRQA MPC83xx_IRQ_EXT4 +#define PIRQB MPC83xx_IRQ_EXT5 +#define PIRQC MPC83xx_IRQ_EXT6 +#define PIRQD MPC83xx_IRQ_EXT7 + +#define MPC83xx_PCI1_LOWER_IO 0x00000000 +#define MPC83xx_PCI1_UPPER_IO 0x00ffffff +#define MPC83xx_PCI1_LOWER_MEM 0x80000000 +#define MPC83xx_PCI1_UPPER_MEM 0x9fffffff +#define MPC83xx_PCI1_IO_BASE 0xe2000000 +#define MPC83xx_PCI1_MEM_OFFSET 0x00000000 +#define MPC83xx_PCI1_IO_SIZE 0x01000000 + +#define MPC83xx_PCI2_LOWER_IO 0x00000000 +#define MPC83xx_PCI2_UPPER_IO 0x00ffffff +#define MPC83xx_PCI2_LOWER_MEM 0xa0000000 +#define MPC83xx_PCI2_UPPER_MEM 0xbfffffff +#define MPC83xx_PCI2_IO_BASE 0xe3000000 +#define MPC83xx_PCI2_MEM_OFFSET 0x00000000 +#define MPC83xx_PCI2_IO_SIZE 0x01000000 #endif /* __MACH_MPC83XX_SYS_H__ */ diff --git a/arch/ppc/syslib/ppc83xx_pci.h b/arch/ppc/syslib/ppc83xx_pci.h new file mode 100644 index 000000000000..ec691640f6be --- /dev/null +++ b/arch/ppc/syslib/ppc83xx_pci.h @@ -0,0 +1,151 @@ +/* Created by Tony Li + * Copyright (c) 2005 freescale semiconductor + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __PPC_SYSLIB_PPC83XX_PCI_H +#define __PPC_SYSLIB_PPC83XX_PCI_H + +typedef struct immr_clk { + u32 spmr; /* system PLL mode Register */ + u32 occr; /* output clock control Register */ + u32 sccr; /* system clock control Register */ + u8 res0[0xF4]; +} immr_clk_t; + +/* + * Sequencer + */ +typedef struct immr_ios { + u32 potar0; + u8 res0[4]; + u32 pobar0; + u8 res1[4]; + u32 pocmr0; + u8 res2[4]; + u32 potar1; + u8 res3[4]; + u32 pobar1; + u8 res4[4]; + u32 pocmr1; + u8 res5[4]; + u32 potar2; + u8 res6[4]; + u32 pobar2; + u8 res7[4]; + u32 pocmr2; + u8 res8[4]; + u32 potar3; + u8 res9[4]; + u32 pobar3; + u8 res10[4]; + u32 pocmr3; + u8 res11[4]; + u32 potar4; + u8 res12[4]; + u32 pobar4; + u8 res13[4]; + u32 pocmr4; + u8 res14[4]; + u32 potar5; + u8 res15[4]; + u32 pobar5; + u8 res16[4]; + u32 pocmr5; + u8 res17[4]; + u8 res18[0x60]; + u32 pmcr; + u8 res19[4]; + u32 dtcr; + u8 res20[4]; +} immr_ios_t; +#define POTAR_TA_MASK 0x000fffff +#define POBAR_BA_MASK 0x000fffff +#define POCMR_EN 0x80000000 +#define POCMR_IO 0x40000000 /* 0--memory space 1--I/O space */ +#define POCMR_SE 0x20000000 /* streaming enable */ +#define POCMR_DST 0x10000000 /* 0--PCI1 1--PCI2 */ +#define POCMR_CM_MASK 0x000fffff + +/* + * PCI Controller Control and Status Registers + */ +typedef struct immr_pcictrl { + u32 esr; + u32 ecdr; + u32 eer; + u32 eatcr; + u32 eacr; + u32 eeacr; + u32 edlcr; + u32 edhcr; + u32 gcr; + u32 ecr; + u32 gsr; + u8 res0[12]; + u32 pitar2; + u8 res1[4]; + u32 pibar2; + u32 piebar2; + u32 piwar2; + u8 res2[4]; + u32 pitar1; + u8 res3[4]; + u32 pibar1; + u32 piebar1; + u32 piwar1; + u8 res4[4]; + u32 pitar0; + u8 res5[4]; + u32 pibar0; + u8 res6[4]; + u32 piwar0; + u8 res7[132]; +} immr_pcictrl_t; +#define PITAR_TA_MASK 0x000fffff +#define PIBAR_MASK 0xffffffff +#define PIEBAR_EBA_MASK 0x000fffff +#define PIWAR_EN 0x80000000 +#define PIWAR_PF 0x20000000 +#define PIWAR_RTT_MASK 0x000f0000 +#define PIWAR_RTT_NO_SNOOP 0x00040000 +#define PIWAR_RTT_SNOOP 0x00050000 +#define PIWAR_WTT_MASK 0x0000f000 +#define PIWAR_WTT_NO_SNOOP 0x00004000 +#define PIWAR_WTT_SNOOP 0x00005000 +#define PIWAR_IWS_MASK 0x0000003F +#define PIWAR_IWS_4K 0x0000000B +#define PIWAR_IWS_8K 0x0000000C +#define PIWAR_IWS_16K 0x0000000D +#define PIWAR_IWS_32K 0x0000000E +#define PIWAR_IWS_64K 0x0000000F +#define PIWAR_IWS_128K 0x00000010 +#define PIWAR_IWS_256K 0x00000011 +#define PIWAR_IWS_512K 0x00000012 +#define PIWAR_IWS_1M 0x00000013 +#define PIWAR_IWS_2M 0x00000014 +#define PIWAR_IWS_4M 0x00000015 +#define PIWAR_IWS_8M 0x00000016 +#define PIWAR_IWS_16M 0x00000017 +#define PIWAR_IWS_32M 0x00000018 +#define PIWAR_IWS_64M 0x00000019 +#define PIWAR_IWS_128M 0x0000001A +#define PIWAR_IWS_256M 0x0000001B +#define PIWAR_IWS_512M 0x0000001C +#define PIWAR_IWS_1G 0x0000001D +#define PIWAR_IWS_2G 0x0000001E + +#endif /* __PPC_SYSLIB_PPC83XX_PCI_H */ diff --git a/arch/ppc/syslib/ppc83xx_setup.c b/arch/ppc/syslib/ppc83xx_setup.c index 602a86891f7f..890484e576e7 100644 --- a/arch/ppc/syslib/ppc83xx_setup.c +++ b/arch/ppc/syslib/ppc83xx_setup.c @@ -11,6 +11,17 @@ * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Added PCI support -- Tony Li */ #include @@ -31,6 +42,10 @@ #include #include +#if defined(CONFIG_PCI) +#include +#include +#endif phys_addr_t immrbar; @@ -162,4 +177,237 @@ mpc83xx_halt(void) for(;;); } -/* PCI SUPPORT DOES NOT EXIT, MODEL after ppc85xx_setup.c */ +#if defined(CONFIG_PCI) +void __init +mpc83xx_setup_pci1(struct pci_controller *hose) +{ + u16 reg16; + volatile immr_pcictrl_t * pci_ctrl; + volatile immr_ios_t * ios; + bd_t *binfo = (bd_t *) __res; + + pci_ctrl = ioremap(binfo->bi_immr_base + 0x8500, sizeof(immr_pcictrl_t)); + ios = ioremap(binfo->bi_immr_base + 0x8400, sizeof(immr_ios_t)); + + /* + * Configure PCI Outbound Translation Windows + */ + ios->potar0 = (MPC83xx_PCI1_LOWER_MEM >> 12) & POTAR_TA_MASK; + ios->pobar0 = (MPC83xx_PCI1_LOWER_MEM >> 12) & POBAR_BA_MASK; + ios->pocmr0 = POCMR_EN | + (((0xffffffff - (MPC83xx_PCI1_UPPER_MEM - + MPC83xx_PCI1_LOWER_MEM)) >> 12) & POCMR_CM_MASK); + + /* mapped to PCI1 IO space */ + ios->potar1 = (MPC83xx_PCI1_LOWER_IO >> 12) & POTAR_TA_MASK; + ios->pobar1 = (MPC83xx_PCI1_IO_BASE >> 12) & POBAR_BA_MASK; + ios->pocmr1 = POCMR_EN | POCMR_IO | + (((0xffffffff - (MPC83xx_PCI1_UPPER_IO - + MPC83xx_PCI1_LOWER_IO)) >> 12) & POCMR_CM_MASK); + + /* + * Configure PCI Inbound Translation Windows + */ + pci_ctrl->pitar1 = 0x0; + pci_ctrl->pibar1 = 0x0; + pci_ctrl->piebar1 = 0x0; + pci_ctrl->piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | PIWAR_IWS_2G; + + /* + * Release PCI RST signal + */ + pci_ctrl->gcr = 0; + udelay(2000); + pci_ctrl->gcr = 1; + udelay(2000); + + reg16 = 0xff; + early_read_config_word(hose, hose->first_busno, 0, PCI_COMMAND, ®16); + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + early_write_config_word(hose, hose->first_busno, 0, PCI_COMMAND, reg16); + + /* + * Clear non-reserved bits in status register. + */ + early_write_config_word(hose, hose->first_busno, 0, PCI_STATUS, 0xffff); + early_write_config_byte(hose, hose->first_busno, 0, PCI_LATENCY_TIMER, 0x80); + + iounmap(pci_ctrl); + iounmap(ios); +} + +void __init +mpc83xx_setup_pci2(struct pci_controller *hose) +{ + u16 reg16; + volatile immr_pcictrl_t * pci_ctrl; + volatile immr_ios_t * ios; + bd_t *binfo = (bd_t *) __res; + + pci_ctrl = ioremap(binfo->bi_immr_base + 0x8600, sizeof(immr_pcictrl_t)); + ios = ioremap(binfo->bi_immr_base + 0x8400, sizeof(immr_ios_t)); + + /* + * Configure PCI Outbound Translation Windows + */ + ios->potar3 = (MPC83xx_PCI2_LOWER_MEM >> 12) & POTAR_TA_MASK; + ios->pobar3 = (MPC83xx_PCI2_LOWER_MEM >> 12) & POBAR_BA_MASK; + ios->pocmr3 = POCMR_EN | POCMR_DST | + (((0xffffffff - (MPC83xx_PCI2_UPPER_MEM - + MPC83xx_PCI2_LOWER_MEM)) >> 12) & POCMR_CM_MASK); + + /* mapped to PCI2 IO space */ + ios->potar4 = (MPC83xx_PCI2_LOWER_IO >> 12) & POTAR_TA_MASK; + ios->pobar4 = (MPC83xx_PCI2_IO_BASE >> 12) & POBAR_BA_MASK; + ios->pocmr4 = POCMR_EN | POCMR_DST | POCMR_IO | + (((0xffffffff - (MPC83xx_PCI2_UPPER_IO - + MPC83xx_PCI2_LOWER_IO)) >> 12) & POCMR_CM_MASK); + + /* + * Configure PCI Inbound Translation Windows + */ + pci_ctrl->pitar1 = 0x0; + pci_ctrl->pibar1 = 0x0; + pci_ctrl->piebar1 = 0x0; + pci_ctrl->piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | PIWAR_IWS_2G; + + /* + * Release PCI RST signal + */ + pci_ctrl->gcr = 0; + udelay(2000); + pci_ctrl->gcr = 1; + udelay(2000); + + reg16 = 0xff; + early_read_config_word(hose, hose->first_busno, 0, PCI_COMMAND, ®16); + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + early_write_config_word(hose, hose->first_busno, 0, PCI_COMMAND, reg16); + + /* + * Clear non-reserved bits in status register. + */ + early_write_config_word(hose, hose->first_busno, 0, PCI_STATUS, 0xffff); + early_write_config_byte(hose, hose->first_busno, 0, PCI_LATENCY_TIMER, 0x80); + + iounmap(pci_ctrl); + iounmap(ios); +} + +/* + * PCI buses can be enabled only if SYS board combinates with PIB + * (Platform IO Board) board which provide 3 PCI slots. There is 2 PCI buses + * and 3 PCI slots, so people must configure the routes between them before + * enable PCI bus. This routes are under the control of PCA9555PW device which + * can be accessed via I2C bus 2 and are configured by firmware. Refer to + * Freescale to get more information about firmware configuration. + */ + +extern int mpc83xx_exclude_device(u_char bus, u_char devfn); +extern int mpc83xx_map_irq(struct pci_dev *dev, unsigned char idsel, + unsigned char pin); +void __init +mpc83xx_setup_hose(void) +{ + u32 val32; + volatile immr_clk_t * clk; + struct pci_controller * hose1; +#ifdef CONFIG_MPC83xx_PCI2 + struct pci_controller * hose2; +#endif + bd_t * binfo = (bd_t *)__res; + + clk = ioremap(binfo->bi_immr_base + 0xA00, + sizeof(immr_clk_t)); + + /* + * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode + */ + val32 = clk->occr; + udelay(2000); + clk->occr = 0xff000000; + udelay(2000); + + iounmap(clk); + + hose1 = pcibios_alloc_controller(); + if(!hose1) + return; + + ppc_md.pci_swizzle = common_swizzle; + ppc_md.pci_map_irq = mpc83xx_map_irq; + + hose1->bus_offset = 0; + hose1->first_busno = 0; + hose1->last_busno = 0xff; + + setup_indirect_pci(hose1, binfo->bi_immr_base + PCI1_CFG_ADDR_OFFSET, + binfo->bi_immr_base + PCI1_CFG_DATA_OFFSET); + hose1->set_cfg_type = 1; + + mpc83xx_setup_pci1(hose1); + + hose1->pci_mem_offset = MPC83xx_PCI1_MEM_OFFSET; + hose1->mem_space.start = MPC83xx_PCI1_LOWER_MEM; + hose1->mem_space.end = MPC83xx_PCI1_UPPER_MEM; + + hose1->io_base_phys = MPC83xx_PCI1_IO_BASE; + hose1->io_space.start = MPC83xx_PCI1_LOWER_IO; + hose1->io_space.end = MPC83xx_PCI1_UPPER_IO; +#ifdef CONFIG_MPC83xx_PCI2 + isa_io_base = (unsigned long)ioremap(MPC83xx_PCI1_IO_BASE, + MPC83xx_PCI1_IO_SIZE + MPC83xx_PCI2_IO_SIZE); +#else + isa_io_base = (unsigned long)ioremap(MPC83xx_PCI1_IO_BASE, + MPC83xx_PCI1_IO_SIZE); +#endif /* CONFIG_MPC83xx_PCI2 */ + hose1->io_base_virt = (void *)isa_io_base; + /* setup resources */ + pci_init_resource(&hose1->io_resource, + MPC83xx_PCI1_LOWER_IO, + MPC83xx_PCI1_UPPER_IO, + IORESOURCE_IO, "PCI host bridge 1"); + pci_init_resource(&hose1->mem_resources[0], + MPC83xx_PCI1_LOWER_MEM, + MPC83xx_PCI1_UPPER_MEM, + IORESOURCE_MEM, "PCI host bridge 1"); + + ppc_md.pci_exclude_device = mpc83xx_exclude_device; + hose1->last_busno = pciauto_bus_scan(hose1, hose1->first_busno); + +#ifdef CONFIG_MPC83xx_PCI2 + hose2 = pcibios_alloc_controller(); + if(!hose2) + return; + + hose2->bus_offset = hose1->last_busno + 1; + hose2->first_busno = hose1->last_busno + 1; + hose2->last_busno = 0xff; + setup_indirect_pci(hose2, binfo->bi_immr_base + PCI2_CFG_ADDR_OFFSET, + binfo->bi_immr_base + PCI2_CFG_DATA_OFFSET); + hose2->set_cfg_type = 1; + + mpc83xx_setup_pci2(hose2); + + hose2->pci_mem_offset = MPC83xx_PCI2_MEM_OFFSET; + hose2->mem_space.start = MPC83xx_PCI2_LOWER_MEM; + hose2->mem_space.end = MPC83xx_PCI2_UPPER_MEM; + + hose2->io_base_phys = MPC83xx_PCI2_IO_BASE; + hose2->io_space.start = MPC83xx_PCI2_LOWER_IO; + hose2->io_space.end = MPC83xx_PCI2_UPPER_IO; + hose2->io_base_virt = (void *)(isa_io_base + MPC83xx_PCI1_IO_SIZE); + /* setup resources */ + pci_init_resource(&hose2->io_resource, + MPC83xx_PCI2_LOWER_IO, + MPC83xx_PCI2_UPPER_IO, + IORESOURCE_IO, "PCI host bridge 2"); + pci_init_resource(&hose2->mem_resources[0], + MPC83xx_PCI2_LOWER_MEM, + MPC83xx_PCI2_UPPER_MEM, + IORESOURCE_MEM, "PCI host bridge 2"); + + hose2->last_busno = pciauto_bus_scan(hose2, hose2->first_busno); +#endif /* CONFIG_MPC83xx_PCI2 */ +} +#endif /*CONFIG_PCI*/ diff --git a/arch/ppc/syslib/ppc83xx_setup.h b/arch/ppc/syslib/ppc83xx_setup.h index 683f179b746c..c766c1a5f786 100644 --- a/arch/ppc/syslib/ppc83xx_setup.h +++ b/arch/ppc/syslib/ppc83xx_setup.h @@ -12,6 +12,14 @@ * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. */ #ifndef __PPC_SYSLIB_PPC83XX_SETUP_H @@ -19,7 +27,6 @@ #include #include -#include extern unsigned long mpc83xx_find_end_of_memory(void) __init; extern long mpc83xx_time_init(void) __init; @@ -31,13 +38,11 @@ extern void mpc83xx_halt(void); extern void mpc83xx_setup_hose(void) __init; /* PCI config */ -#if 0 -#define PCI1_CFG_ADDR_OFFSET (FIXME) -#define PCI1_CFG_DATA_OFFSET (FIXME) +#define PCI1_CFG_ADDR_OFFSET (0x8300) +#define PCI1_CFG_DATA_OFFSET (0x8304) -#define PCI2_CFG_ADDR_OFFSET (FIXME) -#define PCI2_CFG_DATA_OFFSET (FIXME) -#endif +#define PCI2_CFG_ADDR_OFFSET (0x8380) +#define PCI2_CFG_DATA_OFFSET (0x8384) /* Serial Config */ #ifdef CONFIG_SERIAL_MANY_PORTS -- 2.34.1