From 6a822d060c439bb700f2369767105f49135b94f8 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Tue, 13 Jul 2010 17:13:15 -0700 Subject: [PATCH] iwlwifi: add TLV to specify the size of phy calibration table Different devices have different size of phy calibration table; add new TLV to specify the size. If the TLV is not part of uCode header, the default table size will be used to make sure the backward compatibilities. Signed-off-by: Wey-Yi Guy --- drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c | 4 ++-- drivers/net/wireless/iwlwifi/iwl-agn.c | 24 +++++++++++++++++++++ drivers/net/wireless/iwlwifi/iwl-commands.h | 4 ++-- drivers/net/wireless/iwlwifi/iwl-dev.h | 9 ++++++++ 4 files changed, 37 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c index f06d1feedf81..a7216dda9786 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c @@ -164,7 +164,7 @@ static void iwlagn_gain_computation(struct iwl_priv *priv, memset(&cmd, 0, sizeof(cmd)); - cmd.hdr.op_code = IWL_PHY_CALIBRATE_CHAIN_NOISE_GAIN_CMD; + cmd.hdr.op_code = priv->_agn.phy_calib_chain_noise_gain_cmd; cmd.hdr.first_group = 0; cmd.hdr.groups_num = 1; cmd.hdr.data_valid = 1; @@ -197,7 +197,7 @@ static void iwlagn_chain_noise_reset(struct iwl_priv *priv) data->beacon_count = 0; memset(&cmd, 0, sizeof(cmd)); - cmd.hdr.op_code = IWL_PHY_CALIBRATE_CHAIN_NOISE_RESET_CMD; + cmd.hdr.op_code = priv->_agn.phy_calib_chain_noise_reset_cmd; cmd.hdr.first_group = 0; cmd.hdr.groups_num = 1; cmd.hdr.data_valid = 1; diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 33a8f13ffe0a..db86f70d1a3f 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -1692,6 +1692,7 @@ static void iwl_nic_start(struct iwl_priv *priv) struct iwlagn_ucode_capabilities { u32 max_probe_length; + u32 standard_phy_calibration_size; }; static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context); @@ -1967,6 +1968,13 @@ static int iwlagn_load_firmware(struct iwl_priv *priv, else priv->enhance_sensitivity_table = true; break; + case IWL_UCODE_TLV_PHY_CALIBRATION_SIZE: + if (tlv_len != fixed_tlv_size) + ret = -EINVAL; + else + capa->standard_phy_calibration_size = + le32_to_cpup((__le32 *)tlv_data); + break; default: IWL_WARN(priv, "unknown TLV: %d\n", tlv_type); break; @@ -2005,6 +2013,8 @@ static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context) u32 build; struct iwlagn_ucode_capabilities ucode_capa = { .max_probe_length = 200, + .standard_phy_calibration_size = + IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE, }; memset(&pieces, 0, sizeof(pieces)); @@ -2226,6 +2236,20 @@ static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context) pieces.boot_size); memcpy(priv->ucode_boot.v_addr, pieces.boot, pieces.boot_size); + /* + * figure out the offset of chain noise reset and gain commands + * base on the size of standard phy calibration commands table size + */ + if (ucode_capa.standard_phy_calibration_size > + IWL_MAX_PHY_CALIBRATE_TBL_SIZE) + ucode_capa.standard_phy_calibration_size = + IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE; + + priv->_agn.phy_calib_chain_noise_reset_cmd = + ucode_capa.standard_phy_calibration_size; + priv->_agn.phy_calib_chain_noise_gain_cmd = + ucode_capa.standard_phy_calibration_size + 1; + /************************************************** * This is still part of probe() in a sense... * diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h index 04b2e2987f1e..67892f9ef2a5 100644 --- a/drivers/net/wireless/iwlwifi/iwl-commands.h +++ b/drivers/net/wireless/iwlwifi/iwl-commands.h @@ -3660,10 +3660,10 @@ enum { IWL_PHY_CALIBRATE_CRYSTAL_FRQ_CMD = 15, IWL_PHY_CALIBRATE_BASE_BAND_CMD = 16, IWL_PHY_CALIBRATE_TX_IQ_PERD_CMD = 17, - IWL_PHY_CALIBRATE_CHAIN_NOISE_RESET_CMD = 18, - IWL_PHY_CALIBRATE_CHAIN_NOISE_GAIN_CMD = 19, + IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE = 18, }; +#define IWL_MAX_PHY_CALIBRATE_TBL_SIZE (253) #define IWL_CALIB_INIT_CFG_ALL cpu_to_le32(0xffffffff) diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index 297f8d1f5cb5..4fa8cdd8f96c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -571,6 +571,7 @@ enum iwl_ucode_tlv_type { IWL_UCODE_TLV_INIT_EVTLOG_SIZE = 12, IWL_UCODE_TLV_INIT_ERRLOG_PTR = 13, IWL_UCODE_TLV_ENHANCE_SENS_TBL = 14, + IWL_UCODE_TLV_PHY_CALIBRATION_SIZE = 15, }; struct iwl_ucode_tlv { @@ -1321,6 +1322,14 @@ struct iwl_priv { u32 init_evtlog_ptr, init_evtlog_size, init_errlog_ptr; u32 inst_evtlog_ptr, inst_evtlog_size, inst_errlog_ptr; + /* + * chain noise reset and gain commands are the + * two extra calibration commands follows the standard + * phy calibration commands + */ + u8 phy_calib_chain_noise_reset_cmd; + u8 phy_calib_chain_noise_gain_cmd; + struct iwl_notif_statistics statistics; struct iwl_bt_notif_statistics statistics_bt; #ifdef CONFIG_IWLWIFI_DEBUGFS -- 2.34.1