From 7913ad1ad83409e7f9ed5758bb4324bf64c95a73 Mon Sep 17 00:00:00 2001 From: Finn Thain Date: Sat, 12 Apr 2014 23:48:56 +1000 Subject: [PATCH] m68k: Multi-platform EARLY_PRINTK Make the boot console available to more m68k platforms by leveraging the head.S debug console. The boot console is enabled by the "earlyprintk" command line argument which is how most other architectures do this. This is a change of behaviour for the Mac but does not negatively impact the common use-case which is not debugging. This is also a change of behaviour for other platforms because it means the serial port stays quiet when CONFIG_EARLY_PRINTK is not enabled. This is also an improvement for the common use-case. Signed-off-by: Finn Thain Tested-by: Stephen N Chivers [Geert: CONSOLE_DEBUG should depend on CONFIG_FONT_SUPPORT] Reported-by: kbuild test robot Signed-off-by: Geert Uytterhoeven --- Documentation/kernel-parameters.txt | 2 +- arch/m68k/Kconfig.debug | 9 ++++- arch/m68k/kernel/Makefile | 2 + arch/m68k/kernel/early_printk.c | 62 +++++++++++++++++++++++++++++ arch/m68k/kernel/head.S | 36 ++++++----------- arch/m68k/mac/config.c | 29 -------------- 6 files changed, 84 insertions(+), 56 deletions(-) create mode 100644 arch/m68k/kernel/early_printk.c diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 30a8ad0dae53..7da289ee0589 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -892,7 +892,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. (mmio) or 32-bit (mmio32). The options are the same as for ttyS, above. - earlyprintk= [X86,SH,BLACKFIN,ARM] + earlyprintk= [X86,SH,BLACKFIN,ARM,M68k] earlyprintk=vga earlyprintk=efi earlyprintk=xen diff --git a/arch/m68k/Kconfig.debug b/arch/m68k/Kconfig.debug index 229682721240..64776d7ac199 100644 --- a/arch/m68k/Kconfig.debug +++ b/arch/m68k/Kconfig.debug @@ -12,12 +12,17 @@ config BOOTPARAM_STRING config EARLY_PRINTK bool "Early printk" - depends on MVME16x || MAC + depends on !(SUN3 || M68360 || M68000 || COLDFIRE) help Write kernel log output directly to a serial port. + Where implemented, output goes to the framebuffer as well. + PROM console functionality on Sun 3x is not affected by this option. + + Pass "earlyprintk" on the kernel command line to get a + boot console. This is useful for kernel debugging when your machine crashes very - early before the console code is initialized. + early, i.e. before the normal console driver is loaded. You should normally say N here, unless you want to debug such a crash. if !MMU diff --git a/arch/m68k/kernel/Makefile b/arch/m68k/kernel/Makefile index 2d5d9be16273..e47778f8588d 100644 --- a/arch/m68k/kernel/Makefile +++ b/arch/m68k/kernel/Makefile @@ -25,3 +25,5 @@ obj-$(CONFIG_HAS_DMA) += dma.o obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o obj-$(CONFIG_BOOTINFO_PROC) += bootinfo_proc.o +obj-$(CONFIG_EARLY_PRINTK) += early_printk.o + diff --git a/arch/m68k/kernel/early_printk.c b/arch/m68k/kernel/early_printk.c new file mode 100644 index 000000000000..919b83794545 --- /dev/null +++ b/arch/m68k/kernel/early_printk.c @@ -0,0 +1,62 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2014 Finn Thain + */ + +#include +#include +#include +#include +#include + +asmlinkage void __init debug_cons_nputs(const char *s, unsigned n); + +static void debug_cons_write(struct console *c, + const char *s, unsigned n) +{ + debug_cons_nputs(s, n); +} + +static struct console early_console_instance = { + .name = "debug", + .write = debug_cons_write, + .flags = CON_PRINTBUFFER | CON_BOOT, + .index = -1 +}; + +static int __init setup_early_printk(char *buf) +{ + /* MVME16x registers an early console after interrupt setup. */ + if (MACH_IS_MVME16x) + return 0; + + if (early_console || buf) + return 0; + + early_console = &early_console_instance; + register_console(early_console); + + return 0; +} +early_param("earlyprintk", setup_early_printk); + +/* + * debug_cons_nputs() defined in arch/m68k/kernel/head.S cannot be called + * after init sections are discarded (for platforms that use it). + */ +#if !(defined(CONFIG_SUN3) || defined(CONFIG_M68360) || \ + defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE)) + +static int __init unregister_early_console(void) +{ + if (!early_console) + return 0; + + return unregister_console(early_console); +} +late_initcall(unregister_early_console); + +#endif diff --git a/arch/m68k/kernel/head.S b/arch/m68k/kernel/head.S index 81e610bfa237..a3cfada88368 100644 --- a/arch/m68k/kernel/head.S +++ b/arch/m68k/kernel/head.S @@ -221,7 +221,7 @@ * MMU_PRINT: There is a routine built into head.S that can display the * MMU data structures. It outputs its result through the serial_putc * interface. So where ever that winds up driving data, that's where the - * mmu struct will appear. On the Macintosh that's typically the console. + * mmu struct will appear. * * SERIAL_DEBUG: There are a series of putc() macro statements * scattered through out the code to give progress of status to the @@ -249,8 +249,8 @@ * USE_MFP: Use the ST-MFP port (Modem1) for serial debug. * * Macintosh constants: - * MAC_USE_SCC_A: Use SCC port A (modem) for serial debug and early console. - * MAC_USE_SCC_B: Use SCC port B (printer) for serial debug and early console. + * MAC_USE_SCC_A: Use SCC port A (modem) for serial debug. + * MAC_USE_SCC_B: Use SCC port B (printer) for serial debug. */ #include @@ -267,27 +267,17 @@ #include #include #include - #ifdef CONFIG_MAC - -#include - -#ifdef CONFIG_FRAMEBUFFER_CONSOLE -#define CONSOLE_DEBUG +# include #endif #ifdef CONFIG_EARLY_PRINTK -#define SERIAL_DEBUG -#else -#undef SERIAL_DEBUG +# define SERIAL_DEBUG +# if defined(CONFIG_MAC) && defined(CONFIG_FONT_SUPPORT) +# define CONSOLE_DEBUG +# endif #endif -#else /* !CONFIG_MAC */ - -#define SERIAL_DEBUG - -#endif /* !CONFIG_MAC */ - #undef MMU_PRINT #undef MMU_NOCACHE_KERNEL #undef DEBUG @@ -3213,21 +3203,19 @@ func_start putn,%d0-%d2 func_return putn -#ifdef CONFIG_MAC +#ifdef CONFIG_EARLY_PRINTK /* - * mac_early_print - * * This routine takes its parameters on the stack. It then * turns around and calls the internal routines. This routine * is used by the boot console. * * The calling parameters are: - * void mac_early_print(const char *str, unsigned length); + * void debug_cons_nputs(const char *str, unsigned length) * * This routine does NOT understand variable arguments only * simple strings! */ -ENTRY(mac_early_print) +ENTRY(debug_cons_nputs) moveml %d0/%d1/%a0,%sp@- movew %sr,%sp@- ori #0x0700,%sr @@ -3249,7 +3237,7 @@ ENTRY(mac_early_print) movew %sp@+,%sr moveml %sp@+,%d0/%d1/%a0 rts -#endif /* CONFIG_MAC */ +#endif /* CONFIG_EARLY_PRINTK */ #if defined(CONFIG_HP300) || defined(CONFIG_APOLLO) func_start set_leds,%d0/%a0 diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c index 982c3fe73c4a..a471eab1a4dd 100644 --- a/arch/m68k/mac/config.c +++ b/arch/m68k/mac/config.c @@ -71,31 +71,6 @@ static void mac_get_model(char *str); static void mac_identify(void); static void mac_report_hardware(void); -#ifdef CONFIG_EARLY_PRINTK -asmlinkage void __init mac_early_print(const char *s, unsigned n); - -static void __init mac_early_cons_write(struct console *con, - const char *s, unsigned n) -{ - mac_early_print(s, n); -} - -static struct console __initdata mac_early_cons = { - .name = "early", - .write = mac_early_cons_write, - .flags = CON_PRINTBUFFER | CON_BOOT, - .index = -1 -}; - -int __init mac_unregister_early_cons(void) -{ - /* mac_early_print can't be used after init sections are discarded */ - return unregister_console(&mac_early_cons); -} - -late_initcall(mac_unregister_early_cons); -#endif - static void __init mac_sched_init(irq_handler_t vector) { via_init_clock(vector); @@ -190,10 +165,6 @@ void __init config_mac(void) mach_beep = mac_mksound; #endif -#ifdef CONFIG_EARLY_PRINTK - register_console(&mac_early_cons); -#endif - /* * Determine hardware present */ -- 2.34.1