From 7b9c5162c1829686baea1962177842c3fa1ea81c Mon Sep 17 00:00:00 2001 From: Niklas Cassel Date: Sat, 25 Jul 2015 02:02:46 +0200 Subject: [PATCH] serial: etraxfs-uart: use mctrl_gpio helpers for handling modem signals In order to use the mctrl_gpio helpers, we change the DT bindings: ri-gpios renamed to rng-gpios. cd-gpios renamed to dcd-gpios. However, no in-tree dts/dtsi specifies these, so no worries. Signed-off-by: Niklas Cassel Reviewed-by: Guenter Roeck Tested-by: Guenter Roeck Acked-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman --- .../bindings/serial/axis,etraxfs-uart.txt | 6 ++- drivers/tty/serial/Kconfig | 1 + drivers/tty/serial/etraxfs-uart.c | 40 +++++-------------- 3 files changed, 16 insertions(+), 31 deletions(-) diff --git a/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt b/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt index ebcbb62c0a76..51b3c9e80ad9 100644 --- a/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt +++ b/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt @@ -6,7 +6,7 @@ Required properties: - interrupts: device interrupt Optional properties: -- {dtr,dsr,ri,cd}-gpios: specify a GPIO for DTR/DSR/RI/CD +- {dtr,dsr,rng,dcd}-gpios: specify a GPIO for DTR/DSR/RI/DCD line respectively. Example: @@ -16,4 +16,8 @@ serial@b00260000 { reg = <0xb0026000 0x1000>; interrupts = <68>; status = "disabled"; + dtr-gpios = <&sysgpio 0 GPIO_ACTIVE_LOW>; + dsr-gpios = <&sysgpio 1 GPIO_ACTIVE_LOW>; + rng-gpios = <&sysgpio 2 GPIO_ACTIVE_LOW>; + dcd-gpios = <&sysgpio 3 GPIO_ACTIVE_LOW>; }; diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 4c8662ea7bb0..cbde6b77ef77 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1067,6 +1067,7 @@ config SERIAL_ETRAXFS bool "ETRAX FS serial port support" depends on ETRAX_ARCH_V32 && OF select SERIAL_CORE + select SERIAL_MCTRL_GPIO if GPIOLIB config SERIAL_ETRAXFS_CONSOLE bool "ETRAX FS serial console support" diff --git a/drivers/tty/serial/etraxfs-uart.c b/drivers/tty/serial/etraxfs-uart.c index 8f242dc84cea..6813e316e9ff 100644 --- a/drivers/tty/serial/etraxfs-uart.c +++ b/drivers/tty/serial/etraxfs-uart.c @@ -10,6 +10,8 @@ #include #include +#include "serial_mctrl_gpio.h" + #define DRV_NAME "etraxfs-uart" #define UART_NR CONFIG_ETRAX_SERIAL_PORTS @@ -28,10 +30,7 @@ struct uart_cris_port { void __iomem *regi_ser; - struct gpio_desc *dtr_pin; - struct gpio_desc *dsr_pin; - struct gpio_desc *ri_pin; - struct gpio_desc *cd_pin; + struct mctrl_gpios *gpios; int write_ongoing; }; @@ -389,21 +388,9 @@ static unsigned int etraxfs_uart_get_mctrl(struct uart_port *port) ret = 0; if (crisv32_serial_get_rts(up)) ret |= TIOCM_RTS; - /* DTR is active low */ - if (up->dtr_pin && !gpiod_get_raw_value(up->dtr_pin)) - ret |= TIOCM_DTR; - /* CD is active low */ - if (up->cd_pin && !gpiod_get_raw_value(up->cd_pin)) - ret |= TIOCM_CD; - /* RI is active low */ - if (up->ri_pin && !gpiod_get_raw_value(up->ri_pin)) - ret |= TIOCM_RI; - /* DSR is active low */ - if (up->dsr_pin && !gpiod_get_raw_value(up->dsr_pin)) - ret |= TIOCM_DSR; if (crisv32_serial_get_cts(up)) ret |= TIOCM_CTS; - return ret; + return mctrl_gpio_get(up->gpios, &ret); } static void etraxfs_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) @@ -411,15 +398,7 @@ static void etraxfs_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) struct uart_cris_port *up = (struct uart_cris_port *)port; crisv32_serial_set_rts(up, mctrl & TIOCM_RTS ? 1 : 0, 0); - /* DTR is active low */ - if (up->dtr_pin) - gpiod_set_raw_value(up->dtr_pin, mctrl & TIOCM_DTR ? 0 : 1); - /* RI is active low */ - if (up->ri_pin) - gpiod_set_raw_value(up->ri_pin, mctrl & TIOCM_RNG ? 0 : 1); - /* CD is active low */ - if (up->cd_pin) - gpiod_set_raw_value(up->cd_pin, mctrl & TIOCM_CD ? 0 : 1); + mctrl_gpio_set(up->gpios, mctrl); } static void etraxfs_uart_break_ctl(struct uart_port *port, int break_state) @@ -913,11 +892,12 @@ static int etraxfs_uart_probe(struct platform_device *pdev) up->irq = irq_of_parse_and_map(np, 0); up->regi_ser = of_iomap(np, 0); - up->dtr_pin = devm_gpiod_get_optional(&pdev->dev, "dtr"); - up->dsr_pin = devm_gpiod_get_optional(&pdev->dev, "dsr"); - up->ri_pin = devm_gpiod_get_optional(&pdev->dev, "ri"); - up->cd_pin = devm_gpiod_get_optional(&pdev->dev, "cd"); up->port.dev = &pdev->dev; + + up->gpios = mctrl_gpio_init(&pdev->dev, 0); + if (IS_ERR(up->gpios)) + return PTR_ERR(up->gpios); + cris_serial_port_init(&up->port, dev_id); etraxfs_uart_ports[dev_id] = up; -- 2.34.1