From 7c50181b69ce65b0a7db6936aca26f86b70e4436 Mon Sep 17 00:00:00 2001 From: Gregory Fong Date: Wed, 17 Jun 2015 18:00:41 -0700 Subject: [PATCH] dt-bindings: brcmstb-gpio: document properties for wakeup Some brcmstb GPIO controllers can be used to wake from suspend, so use the de facto standard property 'wakeup-source' to mark the nodes of controllers with that capability. Also document interrupts-extended, which will be used for wakeup handling because the interrupt parent for the wake IRQ is different from the regular IRQ. While we're at it, a few more fixes: We don't actually use the "interrupt-names" property, so remove it from the listed optional properties and from the examples. And since we're modifying the examples, also follow Brian's suggestions to: - change #gpio-cells, #interrupt-cells, and brcm,gpio-bank-widths from hex to dec - use phandles Reviewed-by: Brian Norris Signed-off-by: Gregory Fong Signed-off-by: Linus Walleij --- .../bindings/gpio/brcm,brcmstb-gpio.txt | 35 +++++++++++++++---- 1 file changed, 28 insertions(+), 7 deletions(-) diff --git a/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt index 435f1bcca341..b405b4410bfb 100644 --- a/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt +++ b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt @@ -33,6 +33,13 @@ Optional properties: - interrupt-parent: phandle of the parent interrupt controller +- interrupts-extended: + Alternate form of specifying interrupts and parents that allows for + multiple parents. This takes precedence over 'interrupts' and + 'interrupt-parent'. Wakeup-capable GPIO controllers often route their + wakeup interrupt lines through a different interrupt controller than the + primary interrupt line, making this property necessary. + - #interrupt-cells: Should be <2>. The first cell is the GPIO number, the second should specify flags. The following subset of flags is supported: @@ -47,19 +54,33 @@ Optional properties: - interrupt-controller: Marks the device node as an interrupt controller -- interrupt-names: - The name of the IRQ resource used by this controller +- wakeup-source: + GPIOs for this controller can be used as a wakeup source Example: upg_gio: gpio@f040a700 { - #gpio-cells = <0x2>; - #interrupt-cells = <0x2>; + #gpio-cells = <2>; + #interrupt-cells = <2>; compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio"; gpio-controller; interrupt-controller; reg = <0xf040a700 0x80>; - interrupt-parent = <0xf>; + interrupt-parent = <&irq0_intc>; + interrupts = <0x6>; + brcm,gpio-bank-widths = <32 32 32 24>; + }; + + upg_gio_aon: gpio@f04172c0 { + #gpio-cells = <2>; + #interrupt-cells = <2>; + compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio"; + gpio-controller; + interrupt-controller; + reg = <0xf04172c0 0x40>; + interrupt-parent = <&irq0_aon_intc>; interrupts = <0x6>; - interrupt-names = "upg_gio"; - brcm,gpio-bank-widths = <0x20 0x20 0x20 0x18>; + interrupts-extended = <&irq0_aon_intc 0x6>, + <&aon_pm_l2_intc 0x5>; + wakeup-source; + brcm,gpio-bank-widths = <18 4>; }; -- 2.34.1