From 83efafb301bc79a32799ca854fb590e82c4396e9 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Mon, 16 Oct 2006 16:03:33 -0500 Subject: [PATCH] [POWERPC] Fix up the OF functions to only do PCI stuff if PCI is actually configured The original problem that inspired this patch was solved quite some time ago (Turning off PCI didn't work), but this patch neatens things up a little (I think), by putting all the PCI stuff inside a single CONFIG_PCI block. It also removes the OF PCI bus matching entries if CONFIG_PCI is off. Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/prom_parse.c | 288 ++++++++++++++++--------------- 1 file changed, 148 insertions(+), 140 deletions(-) diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c index 603dff3ad62a..346fb7bf9a05 100644 --- a/arch/powerpc/kernel/prom_parse.c +++ b/arch/powerpc/kernel/prom_parse.c @@ -25,6 +25,12 @@ #define OF_CHECK_COUNTS(na, ns) ((na) > 0 && (na) <= OF_MAX_ADDR_CELLS && \ (ns) > 0) +static struct of_bus *of_match_bus(struct device_node *np); +static int __of_address_to_resource(struct device_node *dev, + const u32 *addrp, u64 size, unsigned int flags, + struct resource *r); + + /* Debug utility */ #ifdef DEBUG static void of_dump_addr(const char *s, const u32 *addr, int na) @@ -101,6 +107,7 @@ static unsigned int of_bus_default_get_flags(const u32 *addr) } +#ifdef CONFIG_PCI /* * PCI bus specific translator */ @@ -162,6 +169,145 @@ static unsigned int of_bus_pci_get_flags(const u32 *addr) return flags; } +const u32 *of_get_pci_address(struct device_node *dev, int bar_no, u64 *size, + unsigned int *flags) +{ + const u32 *prop; + unsigned int psize; + struct device_node *parent; + struct of_bus *bus; + int onesize, i, na, ns; + + /* Get parent & match bus type */ + parent = of_get_parent(dev); + if (parent == NULL) + return NULL; + bus = of_match_bus(parent); + if (strcmp(bus->name, "pci")) { + of_node_put(parent); + return NULL; + } + bus->count_cells(dev, &na, &ns); + of_node_put(parent); + if (!OF_CHECK_COUNTS(na, ns)) + return NULL; + + /* Get "reg" or "assigned-addresses" property */ + prop = get_property(dev, bus->addresses, &psize); + if (prop == NULL) + return NULL; + psize /= 4; + + onesize = na + ns; + for (i = 0; psize >= onesize; psize -= onesize, prop += onesize, i++) + if ((prop[0] & 0xff) == ((bar_no * 4) + PCI_BASE_ADDRESS_0)) { + if (size) + *size = of_read_number(prop + na, ns); + if (flags) + *flags = bus->get_flags(prop); + return prop; + } + return NULL; +} +EXPORT_SYMBOL(of_get_pci_address); + +int of_pci_address_to_resource(struct device_node *dev, int bar, + struct resource *r) +{ + const u32 *addrp; + u64 size; + unsigned int flags; + + addrp = of_get_pci_address(dev, bar, &size, &flags); + if (addrp == NULL) + return -EINVAL; + return __of_address_to_resource(dev, addrp, size, flags, r); +} +EXPORT_SYMBOL_GPL(of_pci_address_to_resource); + +static u8 of_irq_pci_swizzle(u8 slot, u8 pin) +{ + return (((pin - 1) + slot) % 4) + 1; +} + +int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq) +{ + struct device_node *dn, *ppnode; + struct pci_dev *ppdev; + u32 lspec; + u32 laddr[3]; + u8 pin; + int rc; + + /* Check if we have a device node, if yes, fallback to standard OF + * parsing + */ + dn = pci_device_to_OF_node(pdev); + if (dn) + return of_irq_map_one(dn, 0, out_irq); + + /* Ok, we don't, time to have fun. Let's start by building up an + * interrupt spec. we assume #interrupt-cells is 1, which is standard + * for PCI. If you do different, then don't use that routine. + */ + rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin); + if (rc != 0) + return rc; + /* No pin, exit */ + if (pin == 0) + return -ENODEV; + + /* Now we walk up the PCI tree */ + lspec = pin; + for (;;) { + /* Get the pci_dev of our parent */ + ppdev = pdev->bus->self; + + /* Ouch, it's a host bridge... */ + if (ppdev == NULL) { +#ifdef CONFIG_PPC64 + ppnode = pci_bus_to_OF_node(pdev->bus); +#else + struct pci_controller *host; + host = pci_bus_to_host(pdev->bus); + ppnode = host ? host->arch_data : NULL; +#endif + /* No node for host bridge ? give up */ + if (ppnode == NULL) + return -EINVAL; + } else + /* We found a P2P bridge, check if it has a node */ + ppnode = pci_device_to_OF_node(ppdev); + + /* Ok, we have found a parent with a device-node, hand over to + * the OF parsing code. + * We build a unit address from the linux device to be used for + * resolution. Note that we use the linux bus number which may + * not match your firmware bus numbering. + * Fortunately, in most cases, interrupt-map-mask doesn't include + * the bus number as part of the matching. + * You should still be careful about that though if you intend + * to rely on this function (you ship a firmware that doesn't + * create device nodes for all PCI devices). + */ + if (ppnode) + break; + + /* We can only get here if we hit a P2P bridge with no node, + * let's do standard swizzling and try again + */ + lspec = of_irq_pci_swizzle(PCI_SLOT(pdev->devfn), lspec); + pdev = ppdev; + } + + laddr[0] = (pdev->bus->number << 16) + | (pdev->devfn << 8); + laddr[1] = laddr[2] = 0; + return of_irq_map_raw(ppnode, &lspec, 1, laddr, out_irq); +} +EXPORT_SYMBOL_GPL(of_irq_map_pci); +#endif /* CONFIG_PCI */ + /* * ISA bus specific translator */ @@ -223,6 +369,7 @@ static unsigned int of_bus_isa_get_flags(const u32 *addr) */ static struct of_bus of_busses[] = { +#ifdef CONFIG_PCI /* PCI */ { .name = "pci", @@ -233,6 +380,7 @@ static struct of_bus of_busses[] = { .translate = of_bus_pci_translate, .get_flags = of_bus_pci_get_flags, }, +#endif /* CONFIG_PCI */ /* ISA */ { .name = "isa", @@ -445,48 +593,6 @@ const u32 *of_get_address(struct device_node *dev, int index, u64 *size, } EXPORT_SYMBOL(of_get_address); -const u32 *of_get_pci_address(struct device_node *dev, int bar_no, u64 *size, - unsigned int *flags) -{ - const u32 *prop; - unsigned int psize; - struct device_node *parent; - struct of_bus *bus; - int onesize, i, na, ns; - - /* Get parent & match bus type */ - parent = of_get_parent(dev); - if (parent == NULL) - return NULL; - bus = of_match_bus(parent); - if (strcmp(bus->name, "pci")) { - of_node_put(parent); - return NULL; - } - bus->count_cells(dev, &na, &ns); - of_node_put(parent); - if (!OF_CHECK_COUNTS(na, ns)) - return NULL; - - /* Get "reg" or "assigned-addresses" property */ - prop = get_property(dev, bus->addresses, &psize); - if (prop == NULL) - return NULL; - psize /= 4; - - onesize = na + ns; - for (i = 0; psize >= onesize; psize -= onesize, prop += onesize, i++) - if ((prop[0] & 0xff) == ((bar_no * 4) + PCI_BASE_ADDRESS_0)) { - if (size) - *size = of_read_number(prop + na, ns); - if (flags) - *flags = bus->get_flags(prop); - return prop; - } - return NULL; -} -EXPORT_SYMBOL(of_get_pci_address); - static int __of_address_to_resource(struct device_node *dev, const u32 *addrp, u64 size, unsigned int flags, struct resource *r) @@ -529,20 +635,6 @@ int of_address_to_resource(struct device_node *dev, int index, } EXPORT_SYMBOL_GPL(of_address_to_resource); -int of_pci_address_to_resource(struct device_node *dev, int bar, - struct resource *r) -{ - const u32 *addrp; - u64 size; - unsigned int flags; - - addrp = of_get_pci_address(dev, bar, &size, &flags); - if (addrp == NULL) - return -EINVAL; - return __of_address_to_resource(dev, addrp, size, flags, r); -} -EXPORT_SYMBOL_GPL(of_pci_address_to_resource); - void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop, unsigned long *busno, unsigned long *phys, unsigned long *size) { @@ -898,87 +990,3 @@ int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq return res; } EXPORT_SYMBOL_GPL(of_irq_map_one); - -#ifdef CONFIG_PCI -static u8 of_irq_pci_swizzle(u8 slot, u8 pin) -{ - return (((pin - 1) + slot) % 4) + 1; -} - -int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq) -{ - struct device_node *dn, *ppnode; - struct pci_dev *ppdev; - u32 lspec; - u32 laddr[3]; - u8 pin; - int rc; - - /* Check if we have a device node, if yes, fallback to standard OF - * parsing - */ - dn = pci_device_to_OF_node(pdev); - if (dn) - return of_irq_map_one(dn, 0, out_irq); - - /* Ok, we don't, time to have fun. Let's start by building up an - * interrupt spec. we assume #interrupt-cells is 1, which is standard - * for PCI. If you do different, then don't use that routine. - */ - rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin); - if (rc != 0) - return rc; - /* No pin, exit */ - if (pin == 0) - return -ENODEV; - - /* Now we walk up the PCI tree */ - lspec = pin; - for (;;) { - /* Get the pci_dev of our parent */ - ppdev = pdev->bus->self; - - /* Ouch, it's a host bridge... */ - if (ppdev == NULL) { -#ifdef CONFIG_PPC64 - ppnode = pci_bus_to_OF_node(pdev->bus); -#else - struct pci_controller *host; - host = pci_bus_to_host(pdev->bus); - ppnode = host ? host->arch_data : NULL; -#endif - /* No node for host bridge ? give up */ - if (ppnode == NULL) - return -EINVAL; - } else - /* We found a P2P bridge, check if it has a node */ - ppnode = pci_device_to_OF_node(ppdev); - - /* Ok, we have found a parent with a device-node, hand over to - * the OF parsing code. - * We build a unit address from the linux device to be used for - * resolution. Note that we use the linux bus number which may - * not match your firmware bus numbering. - * Fortunately, in most cases, interrupt-map-mask doesn't include - * the bus number as part of the matching. - * You should still be careful about that though if you intend - * to rely on this function (you ship a firmware that doesn't - * create device nodes for all PCI devices). - */ - if (ppnode) - break; - - /* We can only get here if we hit a P2P bridge with no node, - * let's do standard swizzling and try again - */ - lspec = of_irq_pci_swizzle(PCI_SLOT(pdev->devfn), lspec); - pdev = ppdev; - } - - laddr[0] = (pdev->bus->number << 16) - | (pdev->devfn << 8); - laddr[1] = laddr[2] = 0; - return of_irq_map_raw(ppnode, &lspec, 1, laddr, out_irq); -} -EXPORT_SYMBOL_GPL(of_irq_map_pci); -#endif /* CONFIG_PCI */ -- 2.34.1