From 85e7118412fea31464b62d00bcf4a65fa8904dcc Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 28 Jul 2015 13:39:01 +0800 Subject: [PATCH] ASoC: wm8983: Get rid of wm8983_access_masks table The max8983_access table is used for look up readable/writable attributes of registers. The writable registers are mostly in continuous ranges, so we can replace max8983_access table by using case range. The read fields are all 0, so just drop implement of .readable callback. Also set .max_register setting. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- sound/soc/codecs/wm8983.c | 80 +++++++-------------------------------- 1 file changed, 14 insertions(+), 66 deletions(-) diff --git a/sound/soc/codecs/wm8983.c b/sound/soc/codecs/wm8983.c index 2fdd2c6cc09d..84c858615620 100644 --- a/sound/soc/codecs/wm8983.c +++ b/sound/soc/codecs/wm8983.c @@ -84,66 +84,6 @@ static const struct reg_default wm8983_defaults[] = { { 0x3D, 0x0000 }, /* R61 - BIAS CTRL */ }; -static const struct wm8983_reg_access { - u16 read; /* Mask of readable bits */ - u16 write; /* Mask of writable bits */ -} wm8983_access_masks[WM8983_MAX_REGISTER + 1] = { - [0x00] = { 0x0000, 0x01FF }, /* R0 - Software Reset */ - [0x01] = { 0x0000, 0x01FF }, /* R1 - Power management 1 */ - [0x02] = { 0x0000, 0x01FF }, /* R2 - Power management 2 */ - [0x03] = { 0x0000, 0x01EF }, /* R3 - Power management 3 */ - [0x04] = { 0x0000, 0x01FF }, /* R4 - Audio Interface */ - [0x05] = { 0x0000, 0x003F }, /* R5 - Companding control */ - [0x06] = { 0x0000, 0x01FD }, /* R6 - Clock Gen control */ - [0x07] = { 0x0000, 0x000F }, /* R7 - Additional control */ - [0x08] = { 0x0000, 0x003F }, /* R8 - GPIO Control */ - [0x09] = { 0x0000, 0x0070 }, /* R9 - Jack Detect Control 1 */ - [0x0A] = { 0x0000, 0x004F }, /* R10 - DAC Control */ - [0x0B] = { 0x0000, 0x01FF }, /* R11 - Left DAC digital Vol */ - [0x0C] = { 0x0000, 0x01FF }, /* R12 - Right DAC digital vol */ - [0x0D] = { 0x0000, 0x00FF }, /* R13 - Jack Detect Control 2 */ - [0x0E] = { 0x0000, 0x01FB }, /* R14 - ADC Control */ - [0x0F] = { 0x0000, 0x01FF }, /* R15 - Left ADC Digital Vol */ - [0x10] = { 0x0000, 0x01FF }, /* R16 - Right ADC Digital Vol */ - [0x12] = { 0x0000, 0x017F }, /* R18 - EQ1 - low shelf */ - [0x13] = { 0x0000, 0x017F }, /* R19 - EQ2 - peak 1 */ - [0x14] = { 0x0000, 0x017F }, /* R20 - EQ3 - peak 2 */ - [0x15] = { 0x0000, 0x017F }, /* R21 - EQ4 - peak 3 */ - [0x16] = { 0x0000, 0x007F }, /* R22 - EQ5 - high shelf */ - [0x18] = { 0x0000, 0x01FF }, /* R24 - DAC Limiter 1 */ - [0x19] = { 0x0000, 0x007F }, /* R25 - DAC Limiter 2 */ - [0x1B] = { 0x0000, 0x01FF }, /* R27 - Notch Filter 1 */ - [0x1C] = { 0x0000, 0x017F }, /* R28 - Notch Filter 2 */ - [0x1D] = { 0x0000, 0x017F }, /* R29 - Notch Filter 3 */ - [0x1E] = { 0x0000, 0x017F }, /* R30 - Notch Filter 4 */ - [0x20] = { 0x0000, 0x01BF }, /* R32 - ALC control 1 */ - [0x21] = { 0x0000, 0x00FF }, /* R33 - ALC control 2 */ - [0x22] = { 0x0000, 0x01FF }, /* R34 - ALC control 3 */ - [0x23] = { 0x0000, 0x000F }, /* R35 - Noise Gate */ - [0x24] = { 0x0000, 0x001F }, /* R36 - PLL N */ - [0x25] = { 0x0000, 0x003F }, /* R37 - PLL K 1 */ - [0x26] = { 0x0000, 0x01FF }, /* R38 - PLL K 2 */ - [0x27] = { 0x0000, 0x01FF }, /* R39 - PLL K 3 */ - [0x29] = { 0x0000, 0x000F }, /* R41 - 3D control */ - [0x2A] = { 0x0000, 0x01E7 }, /* R42 - OUT4 to ADC */ - [0x2B] = { 0x0000, 0x01BF }, /* R43 - Beep control */ - [0x2C] = { 0x0000, 0x0177 }, /* R44 - Input ctrl */ - [0x2D] = { 0x0000, 0x01FF }, /* R45 - Left INP PGA gain ctrl */ - [0x2E] = { 0x0000, 0x01FF }, /* R46 - Right INP PGA gain ctrl */ - [0x2F] = { 0x0000, 0x0177 }, /* R47 - Left ADC BOOST ctrl */ - [0x30] = { 0x0000, 0x0177 }, /* R48 - Right ADC BOOST ctrl */ - [0x31] = { 0x0000, 0x007F }, /* R49 - Output ctrl */ - [0x32] = { 0x0000, 0x01FF }, /* R50 - Left mixer ctrl */ - [0x33] = { 0x0000, 0x01FF }, /* R51 - Right mixer ctrl */ - [0x34] = { 0x0000, 0x01FF }, /* R52 - LOUT1 (HP) volume ctrl */ - [0x35] = { 0x0000, 0x01FF }, /* R53 - ROUT1 (HP) volume ctrl */ - [0x36] = { 0x0000, 0x01FF }, /* R54 - LOUT2 (SPK) volume ctrl */ - [0x37] = { 0x0000, 0x01FF }, /* R55 - ROUT2 (SPK) volume ctrl */ - [0x38] = { 0x0000, 0x004F }, /* R56 - OUT3 mixer ctrl */ - [0x39] = { 0x0000, 0x00FF }, /* R57 - OUT4 (MONO) mix ctrl */ - [0x3D] = { 0x0000, 0x0100 } /* R61 - BIAS CTRL */ -}; - /* vol/gain update regs */ static const int vol_update_regs[] = { WM8983_LEFT_DAC_DIGITAL_VOL, @@ -605,12 +545,19 @@ static int eqmode_put(struct snd_kcontrol *kcontrol, return 0; } -static bool wm8983_readable(struct device *dev, unsigned int reg) +static bool wm8983_writeable(struct device *dev, unsigned int reg) { - if (reg > WM8983_MAX_REGISTER) - return 0; - - return wm8983_access_masks[reg].read != 0; + switch (reg) { + case WM8983_SOFTWARE_RESET ... WM8983_RIGHT_ADC_DIGITAL_VOL: + case WM8983_EQ1_LOW_SHELF ... WM8983_DAC_LIMITER_2: + case WM8983_NOTCH_FILTER_1 ... WM8983_NOTCH_FILTER_4: + case WM8983_ALC_CONTROL_1 ... WM8983_PLL_K_3: + case WM8983_3D_CONTROL ... WM8983_OUT4_MONO_MIX_CTRL: + case WM8983_BIAS_CTRL: + return true; + default: + return false; + } } static int wm8983_dac_mute(struct snd_soc_dai *dai, int mute) @@ -1048,8 +995,9 @@ static const struct regmap_config wm8983_regmap = { .reg_defaults = wm8983_defaults, .num_reg_defaults = ARRAY_SIZE(wm8983_defaults), .cache_type = REGCACHE_RBTREE, + .max_register = WM8983_MAX_REGISTER, - .readable_reg = wm8983_readable, + .writeable_reg = wm8983_writeable, }; #if defined(CONFIG_SPI_MASTER) -- 2.34.1