From 86761fcbea8a779b0aa2af120173cd4ef7edd72f Mon Sep 17 00:00:00 2001 From: Franky Lin Date: Thu, 13 Sep 2012 21:11:58 +0200 Subject: [PATCH] brcmfmac: remove obsolete sdio bus sleep mechanism Remove sdio bus sleep mechanism since it is never invoked. Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Arend van Spriel Signed-off-by: Franky Lin Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- .../wireless/brcm80211/brcmfmac/dhd_sdio.c | 93 ------------------- 1 file changed, 93 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index 4580ff34c2d0..2ca9e8c179c7 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -549,7 +549,6 @@ struct brcmf_sdio { s32 idleclock; /* How to set bus driver when idle */ s32 sd_rxchain; bool use_rxchain; /* If brcmf should use PKT chains */ - bool sleeping; /* Is SDIO bus sleeping? */ bool rxflow_mode; /* Rx flow control mode */ bool rxflow; /* Is rx flow control on */ bool alp_only; /* Don't use HT clock (ALP only) */ @@ -853,81 +852,6 @@ static int brcmf_sdbrcm_clkctl(struct brcmf_sdio *bus, uint target, bool pendok) return 0; } -static int brcmf_sdbrcm_bussleep(struct brcmf_sdio *bus, bool sleep) -{ - int ret; - - brcmf_dbg(INFO, "request %s (currently %s)\n", - sleep ? "SLEEP" : "WAKE", - bus->sleeping ? "SLEEP" : "WAKE"); - - /* Done if we're already in the requested state */ - if (sleep == bus->sleeping) - return 0; - - /* Going to sleep: set the alarm and turn off the lights... */ - if (sleep) { - /* Don't sleep if something is pending */ - if (bus->dpc_sched || bus->rxskip || pktq_len(&bus->txq)) - return -EBUSY; - - /* Make sure the controller has the bus up */ - brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false); - - /* Tell device to start using OOB wakeup */ - ret = w_sdreg32(bus, SMB_USE_OOB, - offsetof(struct sdpcmd_regs, tosbmailbox)); - if (ret != 0) - brcmf_dbg(ERROR, "CANNOT SIGNAL CHIP, WILL NOT WAKE UP!!\n"); - - /* Turn off our contribution to the HT clock request */ - brcmf_sdbrcm_clkctl(bus, CLK_SDONLY, false); - - brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, - SBSDIO_FORCE_HW_CLKREQ_OFF, NULL); - - /* Isolate the bus */ - brcmf_sdio_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL, - SBSDIO_DEVCTL_PADS_ISO, NULL); - - /* Change state */ - bus->sleeping = true; - - } else { - /* Waking up: bus power up is ok, set local state */ - - brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, - 0, NULL); - - /* Make sure the controller has the bus up */ - brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false); - - /* Send misc interrupt to indicate OOB not needed */ - ret = w_sdreg32(bus, 0, - offsetof(struct sdpcmd_regs, tosbmailboxdata)); - if (ret == 0) - ret = w_sdreg32(bus, SMB_DEV_INT, - offsetof(struct sdpcmd_regs, tosbmailbox)); - - if (ret != 0) - brcmf_dbg(ERROR, "CANNOT SIGNAL CHIP TO CLEAR OOB!!\n"); - - /* Make sure we have SD bus access */ - brcmf_sdbrcm_clkctl(bus, CLK_SDONLY, false); - - /* Change state */ - bus->sleeping = false; - } - - return 0; -} - -static void bus_wake(struct brcmf_sdio *bus) -{ - if (bus->sleeping) - brcmf_sdbrcm_bussleep(bus, false); -} - static u32 brcmf_sdbrcm_hostmail(struct brcmf_sdio *bus) { u32 intstatus = 0; @@ -2267,8 +2191,6 @@ static void brcmf_sdbrcm_bus_stop(struct device *dev) down(&bus->sdsem); - bus_wake(bus); - /* Enable clock for device interrupts */ brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false); @@ -2404,8 +2326,6 @@ static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus) } } - bus_wake(bus); - /* Make sure backplane clock is on */ brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, true); if (bus->clkstate == CLK_PENDING) @@ -2918,8 +2838,6 @@ brcmf_sdbrcm_bus_txctl(struct device *dev, unsigned char *msg, uint msglen) /* Need to lock here to protect txseq and SDIO tx calls */ down(&bus->sdsem); - bus_wake(bus); - /* Make sure backplane clock is on */ brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false); @@ -3776,12 +3694,6 @@ void brcmf_sdbrcm_isr(void *arg) bus->sdcnt.intrcount++; bus->ipend = true; - /* Shouldn't get this interrupt if we're sleeping? */ - if (bus->sleeping) { - brcmf_dbg(ERROR, "INTERRUPT WHILE SLEEPING??\n"); - return; - } - /* Disable additional interrupts (is this needed now)? */ if (!bus->intr) brcmf_dbg(ERROR, "isr w/o interrupt configured!\n"); @@ -3801,10 +3713,6 @@ static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_sdio *bus) brcmf_dbg(TIMER, "Enter\n"); - /* Ignore the timer if simulating bus down */ - if (bus->sleeping) - return false; - down(&bus->sdsem); /* Poll period: check device if appropriate. */ @@ -4024,7 +3932,6 @@ static bool brcmf_sdbrcm_probe_init(struct brcmf_sdio *bus) SDIO_FUNC_ENABLE_1, NULL); bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN; - bus->sleeping = false; bus->rxflow = false; /* Done with backplane-dependent accesses, can drop clock... */ -- 2.34.1