From 8801df86d79b1ffda94e3b937bc19bbe9a66557d Mon Sep 17 00:00:00 2001
From: Bob Copeland <me@bobcopeland.com>
Date: Sat, 21 Aug 2010 16:39:02 -0400
Subject: [PATCH] ath5k: trivial spelling fixes
Fix some comments:
s/transmition/transmission/
s/puting/putting/
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
drivers/net/wireless/ath/ath5k/pcu.c | 4 ++--
drivers/net/wireless/ath/ath5k/phy.c | 2 +-
drivers/net/wireless/ath/ath5k/reset.c | 6 +++---
3 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/ath/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c
index 3fef5931ec3a..bb2e21553d1b 100644
--- a/drivers/net/wireless/ath/ath5k/pcu.c
+++ b/drivers/net/wireless/ath/ath5k/pcu.c
@@ -137,11 +137,11 @@ void ath5k_hw_update_mib_counters(struct ath5k_hw *ah)
* ath5k_hw_set_ack_bitrate - set bitrate for ACKs
*
* @ah: The &struct ath5k_hw
- * @high: Flag to determine if we want to use high transmition rate
+ * @high: Flag to determine if we want to use high transmission rate
* for ACKs or not
*
* If high flag is set, we tell hw to use a set of control rates based on
- * the current transmition rate (check out control_rates array inside reset.c).
+ * the current transmission rate (check out control_rates array inside reset.c).
* If not hw just uses the lowest rate available for the current modulation
* scheme being used (1Mbit for CCK and 6Mbits for OFDM).
*/
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index c7c446592374..8c27a3644d2f 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -2987,7 +2987,7 @@ ath5k_setup_rate_powertable(struct ath5k_hw *ah, u16 max_pwr,
/*
- * Set transmition power
+ * Set transmission power
*/
int
ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel,
diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
index 4154959125b6..58912cd762d9 100644
--- a/drivers/net/wireless/ath/ath5k/reset.c
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -326,7 +326,7 @@ commit:
* register). After this MAC and Baseband are
* disabled and a full reset is needed to come
* back. This way we save as much power as possible
- * without puting the card on full sleep.
+ * without putting the card on full sleep.
*/
int ath5k_hw_on_hold(struct ath5k_hw *ah)
{
@@ -344,7 +344,7 @@ int ath5k_hw_on_hold(struct ath5k_hw *ah)
/*
* Put chipset on warm reset...
*
- * Note: puting PCI core on warm reset on PCI-E cards
+ * Note: putting PCI core on warm reset on PCI-E cards
* results card to hang and always return 0xffff... so
* we ingore that flag for PCI-E cards. On PCI cards
* this flag gets cleared after 64 PCI clocks.
@@ -400,7 +400,7 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
/*
* Put chipset on warm reset...
*
- * Note: puting PCI core on warm reset on PCI-E cards
+ * Note: putting PCI core on warm reset on PCI-E cards
* results card to hang and always return 0xffff... so
* we ingore that flag for PCI-E cards. On PCI cards
* this flag gets cleared after 64 PCI clocks.
--
2.34.1