From 91c68a7c1d92b48287f2f3111a9b09b26a263d3f Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 8 Mar 2015 14:12:41 -0700 Subject: [PATCH] Input: sun4i-ts - A10 (sun4i) has a different temperature curve Testing has revealed that the temperature in the rtp controller of the A10 (sun4i) SoC has a different curve then on the A13 (sun5i) and later models. Add a new sun5i-a13-ts compatible to differentiate the newer models and set the curve based on the compatible string. The new curve is still not ideal on all A10-s, that seems to have to do with there being a large spread between different A10-s out there, the new curve us based on callibration results on 4 completely different models: raw min raw max temp min temp max stepsize offset Tong Zhang's hackberry 2402 2680 45.0 80.0 0.125 -255.3 Hansg's Cubieboard 2207 2300 36.0 45.0 0.096 -175.8 Olliver's lime 1 (*): 2258 2537 48.3 87.1 0.139 -265.7 Olliver's lime 2 (*): 2222 2486 46.7 91.7 0.170 -331.0 *) from: http://linux-sunxi.org/Temperature_Calibration Average all 4: 0.133 -257.0 Average without outliers (middle 2): 0.132 -261.0 Since it is better to slightly overreport the temperature this patch uses the average of all 4 as curve. This fixes the temperature reported on the A10 being much higher then expected. Reported-by: Tong Zhang Signed-off-by: Hans de Goede Signed-off-by: Dmitry Torokhov --- .../bindings/input/touchscreen/sun4i.txt | 3 ++- drivers/input/touchscreen/sun4i-ts.c | 16 +++++++++++++--- 2 files changed, 15 insertions(+), 4 deletions(-) diff --git a/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt b/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt index 433332d3b2ba..d59d25281e9f 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt @@ -2,7 +2,8 @@ sun4i resistive touchscreen controller -------------------------------------- Required properties: - - compatible: "allwinner,sun4i-a10-ts" or "allwinner,sun6i-a31-ts" + - compatible: "allwinner,sun4i-a10-ts", "allwinner,sun5i-a13-ts" or + "allwinner,sun6i-a31-ts" - reg: mmio address range of the chip - interrupts: interrupt to which the chip is connected - #thermal-sensor-cells: shall be 0 diff --git a/drivers/input/touchscreen/sun4i-ts.c b/drivers/input/touchscreen/sun4i-ts.c index b93a28b955fd..66ccd5af537d 100644 --- a/drivers/input/touchscreen/sun4i-ts.c +++ b/drivers/input/touchscreen/sun4i-ts.c @@ -258,6 +258,15 @@ static int sun4i_ts_probe(struct platform_device *pdev) /* Allwinner SDK has temperature = -271 + (value / 6) (C) */ ts->temp_offset = 1626; ts->temp_step = 167; + } else if (of_device_is_compatible(np, "allwinner,sun4i-a10-ts")) { + /* + * The A10 temperature sensor has quite a wide spread, these + * parameters are based on the averaging of the calibration + * results of 4 completely different boards, with a spread of + * temp_step from 96 - 170 and temp_offset from 1758 - 3310. + */ + ts->temp_offset = 2570; + ts->temp_step = 133; } else { /* * The user manuals do not contain the formula for calculating @@ -330,10 +339,10 @@ static int sun4i_ts_probe(struct platform_device *pdev) * finally enable tp mode. */ reg = STYLUS_UP_DEBOUN(5) | STYLUS_UP_DEBOUN_EN(1); - if (of_device_is_compatible(np, "allwinner,sun4i-a10-ts")) - reg |= TP_MODE_EN(1); - else + if (of_device_is_compatible(np, "allwinner,sun6i-a31-ts")) reg |= SUN6I_TP_MODE_EN(1); + else + reg |= TP_MODE_EN(1); writel(reg, ts->base + TP_CTRL1); /* @@ -383,6 +392,7 @@ static int sun4i_ts_remove(struct platform_device *pdev) static const struct of_device_id sun4i_ts_of_match[] = { { .compatible = "allwinner,sun4i-a10-ts", }, + { .compatible = "allwinner,sun5i-a13-ts", }, { .compatible = "allwinner,sun6i-a31-ts", }, { /* sentinel */ } }; -- 2.34.1