From a474aaedac99ba86e28ef6c912a7647c482db6dd Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Tue, 14 Oct 2008 13:50:21 -0600 Subject: [PATCH] rtc-cmos: move wake setup from ACPI glue into RTC driver Move rtc_wake_setup() from drivers/acpi/glue.c into the RTC driver in drivers/rtc/rtc-cmos.c. This removes the ordering constraint between the module_init(acpi_rtc_init) and the cmos_do_probe() code that depends on it. Signed-off-by: Bjorn Helgaas Acked-by: Rafael J. Wysocki Signed-off-by: Linus Torvalds --- drivers/acpi/glue.c | 112 ----------------------------------------- drivers/rtc/rtc-cmos.c | 89 ++++++++++++++++++++++++++++++++ 2 files changed, 89 insertions(+), 112 deletions(-) diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c index 3c578ef78c48..24649ada08df 100644 --- a/drivers/acpi/glue.c +++ b/drivers/acpi/glue.c @@ -260,115 +260,3 @@ static int __init init_acpi_device_notify(void) } arch_initcall(init_acpi_device_notify); - - -#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE) - -#ifdef CONFIG_PM -static u32 rtc_handler(void *context) -{ - acpi_clear_event(ACPI_EVENT_RTC); - acpi_disable_event(ACPI_EVENT_RTC, 0); - return ACPI_INTERRUPT_HANDLED; -} - -static inline void rtc_wake_setup(void) -{ - acpi_install_fixed_event_handler(ACPI_EVENT_RTC, rtc_handler, NULL); - /* - * After the RTC handler is installed, the Fixed_RTC event should - * be disabled. Only when the RTC alarm is set will it be enabled. - */ - acpi_clear_event(ACPI_EVENT_RTC); - acpi_disable_event(ACPI_EVENT_RTC, 0); -} - -static void rtc_wake_on(struct device *dev) -{ - acpi_clear_event(ACPI_EVENT_RTC); - acpi_enable_event(ACPI_EVENT_RTC, 0); -} - -static void rtc_wake_off(struct device *dev) -{ - acpi_disable_event(ACPI_EVENT_RTC, 0); -} -#else -#define rtc_wake_setup() do{}while(0) -#define rtc_wake_on NULL -#define rtc_wake_off NULL -#endif - -/* Every ACPI platform has a mc146818 compatible "cmos rtc". Here we find - * its device node and pass extra config data. This helps its driver use - * capabilities that the now-obsolete mc146818 didn't have, and informs it - * that this board's RTC is wakeup-capable (per ACPI spec). - */ -#include - -static struct cmos_rtc_board_info rtc_info; - - -/* PNP devices are registered in a subsys_initcall(); - * ACPI specifies the PNP IDs to use. - */ -#include - -static int __init pnp_match(struct device *dev, void *data) -{ - static const char *ids[] = { "PNP0b00", "PNP0b01", "PNP0b02", }; - struct pnp_dev *pnp = to_pnp_dev(dev); - int i; - - for (i = 0; i < ARRAY_SIZE(ids); i++) { - if (compare_pnp_id(pnp->id, ids[i]) != 0) - return 1; - } - return 0; -} - -static struct device *__init get_rtc_dev(void) -{ - return bus_find_device(&pnp_bus_type, NULL, NULL, pnp_match); -} - -static int __init acpi_rtc_init(void) -{ - struct device *dev = get_rtc_dev(); - - if (acpi_disabled) - return 0; - - if (dev) { - rtc_wake_setup(); - rtc_info.wake_on = rtc_wake_on; - rtc_info.wake_off = rtc_wake_off; - - /* workaround bug in some ACPI tables */ - if (acpi_gbl_FADT.month_alarm && !acpi_gbl_FADT.day_alarm) { - DBG("bogus FADT month_alarm\n"); - acpi_gbl_FADT.month_alarm = 0; - } - - rtc_info.rtc_day_alarm = acpi_gbl_FADT.day_alarm; - rtc_info.rtc_mon_alarm = acpi_gbl_FADT.month_alarm; - rtc_info.rtc_century = acpi_gbl_FADT.century; - - /* NOTE: S4_RTC_WAKE is NOT currently useful to Linux */ - if (acpi_gbl_FADT.flags & ACPI_FADT_S4_RTC_WAKE) - printk(PREFIX "RTC can wake from S4\n"); - - - dev->platform_data = &rtc_info; - - /* RTC always wakes from S1/S2/S3, and often S4/STD */ - device_init_wakeup(dev, 1); - - put_device(dev); - } else - DBG("RTC unavailable?\n"); - return 0; -} -module_init(acpi_rtc_init); - -#endif diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c index b23af0c2a869..6778f82bad24 100644 --- a/drivers/rtc/rtc-cmos.c +++ b/drivers/rtc/rtc-cmos.c @@ -913,6 +913,92 @@ static inline int cmos_poweroff(struct device *dev) * predate even PNPBIOS should set up platform_bus devices. */ +#ifdef CONFIG_ACPI + +#include + +#ifdef CONFIG_PM +static u32 rtc_handler(void *context) +{ + acpi_clear_event(ACPI_EVENT_RTC); + acpi_disable_event(ACPI_EVENT_RTC, 0); + return ACPI_INTERRUPT_HANDLED; +} + +static inline void rtc_wake_setup(void) +{ + acpi_install_fixed_event_handler(ACPI_EVENT_RTC, rtc_handler, NULL); + /* + * After the RTC handler is installed, the Fixed_RTC event should + * be disabled. Only when the RTC alarm is set will it be enabled. + */ + acpi_clear_event(ACPI_EVENT_RTC); + acpi_disable_event(ACPI_EVENT_RTC, 0); +} + +static void rtc_wake_on(struct device *dev) +{ + acpi_clear_event(ACPI_EVENT_RTC); + acpi_enable_event(ACPI_EVENT_RTC, 0); +} + +static void rtc_wake_off(struct device *dev) +{ + acpi_disable_event(ACPI_EVENT_RTC, 0); +} +#else +#define rtc_wake_setup() do{}while(0) +#define rtc_wake_on NULL +#define rtc_wake_off NULL +#endif + +/* Every ACPI platform has a mc146818 compatible "cmos rtc". Here we find + * its device node and pass extra config data. This helps its driver use + * capabilities that the now-obsolete mc146818 didn't have, and informs it + * that this board's RTC is wakeup-capable (per ACPI spec). + */ +static struct cmos_rtc_board_info acpi_rtc_info; + +static void __devinit +cmos_wake_setup(struct device *dev) +{ + if (acpi_disabled) + return; + + rtc_wake_setup(); + acpi_rtc_info.wake_on = rtc_wake_on; + acpi_rtc_info.wake_off = rtc_wake_off; + + /* workaround bug in some ACPI tables */ + if (acpi_gbl_FADT.month_alarm && !acpi_gbl_FADT.day_alarm) { + dev_dbg(dev, "bogus FADT month_alarm (%d)\n", + acpi_gbl_FADT.month_alarm); + acpi_gbl_FADT.month_alarm = 0; + } + + acpi_rtc_info.rtc_day_alarm = acpi_gbl_FADT.day_alarm; + acpi_rtc_info.rtc_mon_alarm = acpi_gbl_FADT.month_alarm; + acpi_rtc_info.rtc_century = acpi_gbl_FADT.century; + + /* NOTE: S4_RTC_WAKE is NOT currently useful to Linux */ + if (acpi_gbl_FADT.flags & ACPI_FADT_S4_RTC_WAKE) + dev_info(dev, "RTC can wake from S4\n"); + + dev->platform_data = &acpi_rtc_info; + + /* RTC always wakes from S1/S2/S3, and often S4/STD */ + device_init_wakeup(dev, 1); +} + +#else + +static void __devinit +cmos_wake_setup(struct device *dev) +{ +} + +#endif + #ifdef CONFIG_PNP #include @@ -920,6 +1006,8 @@ static inline int cmos_poweroff(struct device *dev) static int __devinit cmos_pnp_probe(struct pnp_dev *pnp, const struct pnp_device_id *id) { + cmos_wake_setup(&pnp->dev); + if (pnp_port_start(pnp,0) == 0x70 && !pnp_irq_valid(pnp,0)) /* Some machines contain a PNP entry for the RTC, but * don't define the IRQ. It should always be safe to @@ -997,6 +1085,7 @@ static struct pnp_driver cmos_pnp_driver = { static int __init cmos_platform_probe(struct platform_device *pdev) { + cmos_wake_setup(&pdev->dev); return cmos_do_probe(&pdev->dev, platform_get_resource(pdev, IORESOURCE_IO, 0), platform_get_irq(pdev, 0)); -- 2.34.1