From a5e90862114124d79e1a3f34641b00fec51d1806 Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Wed, 18 Jul 2007 18:04:17 -0300 Subject: [PATCH] V4L/DVB (5863): TCM825x: Add driver. Add a driver for Toshiba TCM825x VGA camera sensor. This sensor is used e.g. in Nokia N800 internet tablet. This driver uses the new V4L2 internal ioctl interface. Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/Kconfig | 7 + drivers/media/video/Makefile | 2 + drivers/media/video/tcm825x.c | 942 ++++++++++++++++++++++++++++++++++ drivers/media/video/tcm825x.h | 195 +++++++ 4 files changed, 1146 insertions(+) create mode 100644 drivers/media/video/tcm825x.c create mode 100644 drivers/media/video/tcm825x.h diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index e204e7b4028a..675c8574403e 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -197,6 +197,13 @@ config VIDEO_OV7670 OV7670 VGA camera. It currently only works with the M88ALP01 controller. +config VIDEO_TCM825X + tristate "TCM825x camera sensor support" + depends on I2C && VIDEO_V4L2 + ---help--- + This is a driver for the Toshiba TCM825x VGA camera sensor. + It is used for example in Nokia N800. + config VIDEO_SAA7110 tristate "Philips SAA7110 video decoder" depends on VIDEO_V4L1 && I2C diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index d35306daac2f..8f7205b558f6 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -98,6 +98,8 @@ obj-$(CONFIG_VIDEO_CX2341X) += cx2341x.o obj-$(CONFIG_VIDEO_CAFE_CCIC) += cafe_ccic.o obj-$(CONFIG_VIDEO_OV7670) += ov7670.o +obj-$(CONFIG_VIDEO_TCM825X) += tcm825x.o + obj-$(CONFIG_USB_DABUSB) += dabusb.o obj-$(CONFIG_USB_OV511) += ov511.o obj-$(CONFIG_USB_SE401) += se401.o diff --git a/drivers/media/video/tcm825x.c b/drivers/media/video/tcm825x.c new file mode 100644 index 000000000000..4b973b099e59 --- /dev/null +++ b/drivers/media/video/tcm825x.c @@ -0,0 +1,942 @@ +/* + * drivers/media/video/tcm825x.c + * + * TCM825X camera sensor driver. + * + * Copyright (C) 2007 Nokia Corporation. + * + * Contact: Sakari Ailus + * + * Based on code from David Cohen + * + * This driver was based on ov9640 sensor driver from MontaVista + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include +#include + +#include "tcm825x.h" + +/* + * The sensor has two fps modes: the lower one just gives half the fps + * at the same xclk than the high one. + */ +#define MAX_FPS 30 +#define MIN_FPS 8 +#define MAX_HALF_FPS (MAX_FPS / 2) +#define HIGH_FPS_MODE_LOWER_LIMIT 14 +#define DEFAULT_FPS MAX_HALF_FPS + +struct tcm825x_sensor { + const struct tcm825x_platform_data *platform_data; + struct v4l2_int_device *v4l2_int_device; + struct i2c_client *i2c_client; + struct v4l2_pix_format pix; + struct v4l2_fract timeperframe; +}; + +/* list of image formats supported by TCM825X sensor */ +const static struct v4l2_fmtdesc tcm825x_formats[] = { + { + .description = "YUYV (YUV 4:2:2), packed", + .pixelformat = V4L2_PIX_FMT_UYVY, + }, { + /* Note: V4L2 defines RGB565 as: + * + * Byte 0 Byte 1 + * g2 g1 g0 r4 r3 r2 r1 r0 b4 b3 b2 b1 b0 g5 g4 g3 + * + * We interpret RGB565 as: + * + * Byte 0 Byte 1 + * g2 g1 g0 b4 b3 b2 b1 b0 r4 r3 r2 r1 r0 g5 g4 g3 + */ + .description = "RGB565, le", + .pixelformat = V4L2_PIX_FMT_RGB565, + }, +}; + +#define TCM825X_NUM_CAPTURE_FORMATS ARRAY_SIZE(tcm825x_formats) + +/* + * TCM825X register configuration for all combinations of pixel format and + * image size + */ +const static struct tcm825x_reg subqcif = { 0x20, TCM825X_PICSIZ }; +const static struct tcm825x_reg qcif = { 0x18, TCM825X_PICSIZ }; +const static struct tcm825x_reg cif = { 0x14, TCM825X_PICSIZ }; +const static struct tcm825x_reg qqvga = { 0x0c, TCM825X_PICSIZ }; +const static struct tcm825x_reg qvga = { 0x04, TCM825X_PICSIZ }; +const static struct tcm825x_reg vga = { 0x00, TCM825X_PICSIZ }; + +const static struct tcm825x_reg yuv422 = { 0x00, TCM825X_PICFMT }; +const static struct tcm825x_reg rgb565 = { 0x02, TCM825X_PICFMT }; + +/* Our own specific controls */ +#define V4L2_CID_ALC V4L2_CID_PRIVATE_BASE +#define V4L2_CID_H_EDGE_EN V4L2_CID_PRIVATE_BASE + 1 +#define V4L2_CID_V_EDGE_EN V4L2_CID_PRIVATE_BASE + 2 +#define V4L2_CID_LENS V4L2_CID_PRIVATE_BASE + 3 +#define V4L2_CID_MAX_EXPOSURE_TIME V4L2_CID_PRIVATE_BASE + 4 +#define V4L2_CID_LAST_PRIV V4L2_CID_MAX_EXPOSURE_TIME + +/* Video controls */ +static struct vcontrol { + struct v4l2_queryctrl qc; + u16 reg; + u16 start_bit; +} video_control[] = { + { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gain", + .minimum = 0, + .maximum = 63, + .step = 1, + }, + .reg = TCM825X_AG, + .start_bit = 0, + }, + { + { + .id = V4L2_CID_RED_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Red Balance", + .minimum = 0, + .maximum = 255, + .step = 1, + }, + .reg = TCM825X_MRG, + .start_bit = 0, + }, + { + { + .id = V4L2_CID_BLUE_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Blue Balance", + .minimum = 0, + .maximum = 255, + .step = 1, + }, + .reg = TCM825X_MBG, + .start_bit = 0, + }, + { + { + .id = V4L2_CID_AUTO_WHITE_BALANCE, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Auto White Balance", + .minimum = 0, + .maximum = 1, + .step = 0, + }, + .reg = TCM825X_AWBSW, + .start_bit = 7, + }, + { + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Exposure Time", + .minimum = 0, + .maximum = 0x1fff, + .step = 1, + }, + .reg = TCM825X_ESRSPD_U, + .start_bit = 0, + }, + { + { + .id = V4L2_CID_HFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Mirror Image", + .minimum = 0, + .maximum = 1, + .step = 0, + }, + .reg = TCM825X_H_INV, + .start_bit = 6, + }, + { + { + .id = V4L2_CID_VFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Vertical Flip", + .minimum = 0, + .maximum = 1, + .step = 0, + }, + .reg = TCM825X_V_INV, + .start_bit = 7, + }, + /* Private controls */ + { + { + .id = V4L2_CID_ALC, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Auto Luminance Control", + .minimum = 0, + .maximum = 1, + .step = 0, + }, + .reg = TCM825X_ALCSW, + .start_bit = 7, + }, + { + { + .id = V4L2_CID_H_EDGE_EN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Horizontal Edge Enhancement", + .minimum = 0, + .maximum = 0xff, + .step = 1, + }, + .reg = TCM825X_HDTG, + .start_bit = 0, + }, + { + { + .id = V4L2_CID_V_EDGE_EN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Vertical Edge Enhancement", + .minimum = 0, + .maximum = 0xff, + .step = 1, + }, + .reg = TCM825X_VDTG, + .start_bit = 0, + }, + { + { + .id = V4L2_CID_LENS, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Lens Shading Compensation", + .minimum = 0, + .maximum = 0x3f, + .step = 1, + }, + .reg = TCM825X_LENS, + .start_bit = 0, + }, + { + { + .id = V4L2_CID_MAX_EXPOSURE_TIME, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Maximum Exposure Time", + .minimum = 0, + .maximum = 0x3, + .step = 1, + }, + .reg = TCM825X_ESRLIM, + .start_bit = 5, + }, +}; + + +const static struct tcm825x_reg *tcm825x_siz_reg[NUM_IMAGE_SIZES] = +{ &subqcif, &qqvga, &qcif, &qvga, &cif, &vga }; + +const static struct tcm825x_reg *tcm825x_fmt_reg[NUM_PIXEL_FORMATS] = +{ &yuv422, &rgb565 }; + +/* + * Read a value from a register in an TCM825X sensor device. The value is + * returned in 'val'. + * Returns zero if successful, or non-zero otherwise. + */ +static int tcm825x_read_reg(struct i2c_client *client, int reg) +{ + int err; + struct i2c_msg msg[2]; + u8 reg_buf, data_buf = 0; + + if (!client->adapter) + return -ENODEV; + + msg[0].addr = client->addr; + msg[0].flags = 0; + msg[0].len = 1; + msg[0].buf = ®_buf; + msg[1].addr = client->addr; + msg[1].flags = I2C_M_RD; + msg[1].len = 1; + msg[1].buf = &data_buf; + + reg_buf = reg; + + err = i2c_transfer(client->adapter, msg, 2); + if (err < 0) + return err; + return data_buf; +} + +/* + * Write a value to a register in an TCM825X sensor device. + * Returns zero if successful, or non-zero otherwise. + */ +static int tcm825x_write_reg(struct i2c_client *client, u8 reg, u8 val) +{ + int err; + struct i2c_msg msg[1]; + unsigned char data[2]; + + if (!client->adapter) + return -ENODEV; + + msg->addr = client->addr; + msg->flags = 0; + msg->len = 2; + msg->buf = data; + data[0] = reg; + data[1] = val; + err = i2c_transfer(client->adapter, msg, 1); + if (err >= 0) + return 0; + return err; +} + +static int __tcm825x_write_reg_mask(struct i2c_client *client, + u8 reg, u8 val, u8 mask) +{ + int rc; + + /* need to do read - modify - write */ + rc = tcm825x_read_reg(client, reg); + if (rc < 0) + return rc; + + rc &= (~mask); /* Clear the masked bits */ + val &= mask; /* Enforce mask on value */ + val |= rc; + + /* write the new value to the register */ + rc = tcm825x_write_reg(client, reg, val); + if (rc) + return rc; + + return 0; +} + +#define tcm825x_write_reg_mask(client, regmask, val) \ + __tcm825x_write_reg_mask(client, TCM825X_ADDR((regmask)), val, \ + TCM825X_MASK((regmask))) + + +/* + * Initialize a list of TCM825X registers. + * The list of registers is terminated by the pair of values + * { TCM825X_REG_TERM, TCM825X_VAL_TERM }. + * Returns zero if successful, or non-zero otherwise. + */ +static int tcm825x_write_default_regs(struct i2c_client *client, + const struct tcm825x_reg *reglist) +{ + int err; + const struct tcm825x_reg *next = reglist; + + while (!((next->reg == TCM825X_REG_TERM) + && (next->val == TCM825X_VAL_TERM))) { + err = tcm825x_write_reg(client, next->reg, next->val); + if (err) { + dev_err(&client->dev, "register writing failed\n"); + return err; + } + next++; + } + + return 0; +} + +static struct vcontrol *find_vctrl(int id) +{ + int i; + + if (id < V4L2_CID_BASE) + return NULL; + + for (i = 0; i < ARRAY_SIZE(video_control); i++) + if (video_control[i].qc.id == id) + return &video_control[i]; + + return NULL; +} + +/* + * Find the best match for a requested image capture size. The best match + * is chosen as the nearest match that has the same number or fewer pixels + * as the requested size, or the smallest image size if the requested size + * has fewer pixels than the smallest image. + */ +static enum image_size tcm825x_find_size(struct v4l2_int_device *s, + unsigned int width, + unsigned int height) +{ + enum image_size isize; + unsigned long pixels = width * height; + struct tcm825x_sensor *sensor = s->priv; + + for (isize = subQCIF; isize < VGA; isize++) { + if (tcm825x_sizes[isize + 1].height + * tcm825x_sizes[isize + 1].width > pixels) { + dev_dbg(&sensor->i2c_client->dev, "size %d\n", isize); + + return isize; + } + } + + dev_dbg(&sensor->i2c_client->dev, "format default VGA\n"); + + return VGA; +} + +/* + * Configure the TCM825X for current image size, pixel format, and + * frame period. fper is the frame period (in seconds) expressed as a + * fraction. Returns zero if successful, or non-zero otherwise. The + * actual frame period is returned in fper. + */ +static int tcm825x_configure(struct v4l2_int_device *s) +{ + struct tcm825x_sensor *sensor = s->priv; + struct v4l2_pix_format *pix = &sensor->pix; + enum image_size isize = tcm825x_find_size(s, pix->width, pix->height); + struct v4l2_fract *fper = &sensor->timeperframe; + enum pixel_format pfmt; + int err; + u32 tgt_fps; + u8 val; + + /* common register initialization */ + err = tcm825x_write_default_regs( + sensor->i2c_client, sensor->platform_data->default_regs()); + if (err) + return err; + + /* configure image size */ + val = tcm825x_siz_reg[isize]->val; + dev_dbg(&sensor->i2c_client->dev, + "configuring image size %d\n", isize); + err = tcm825x_write_reg_mask(sensor->i2c_client, + tcm825x_siz_reg[isize]->reg, val); + if (err) + return err; + + /* configure pixel format */ + switch (pix->pixelformat) { + default: + case V4L2_PIX_FMT_RGB565: + pfmt = RGB565; + break; + case V4L2_PIX_FMT_UYVY: + pfmt = YUV422; + break; + } + + dev_dbg(&sensor->i2c_client->dev, + "configuring pixel format %d\n", pfmt); + val = tcm825x_fmt_reg[pfmt]->val; + + err = tcm825x_write_reg_mask(sensor->i2c_client, + tcm825x_fmt_reg[pfmt]->reg, val); + if (err) + return err; + + /* + * For frame rate < 15, the FPS reg (addr 0x02, bit 7) must be + * set. Frame rate will be halved from the normal. + */ + tgt_fps = fper->denominator / fper->numerator; + if (tgt_fps <= HIGH_FPS_MODE_LOWER_LIMIT) { + val = tcm825x_read_reg(sensor->i2c_client, 0x02); + val |= 0x80; + tcm825x_write_reg(sensor->i2c_client, 0x02, val); + } + + return 0; +} + +/* + * Given the image capture format in pix, the nominal frame period in + * timeperframe, calculate the required xclk frequency. + * + * TCM825X input frequency characteristics are: + * Minimum 11.9 MHz, Typical 24.57 MHz and maximum 25/27 MHz + */ +#define XCLK_MIN 11900000 +#define XCLK_MAX 25000000 + +static int ioctl_g_ext_clk(struct v4l2_int_device *s, u32 *xclk) +{ + struct tcm825x_sensor *sensor = s->priv; + struct v4l2_fract *timeperframe = &sensor->timeperframe; + u32 tgt_xclk; /* target xclk */ + u32 tgt_fps; /* target frames per secound */ + + tgt_fps = timeperframe->denominator / timeperframe->numerator; + + tgt_xclk = (tgt_fps <= HIGH_FPS_MODE_LOWER_LIMIT) ? + (2457 * tgt_fps) / MAX_HALF_FPS : + (2457 * tgt_fps) / MAX_FPS; + tgt_xclk *= 10000; + + tgt_xclk = min(tgt_xclk, (u32)XCLK_MAX); + tgt_xclk = max(tgt_xclk, (u32)XCLK_MIN); + + *xclk = tgt_xclk; + + return 0; +} + +static int ioctl_s_ext_clk(struct v4l2_int_device *s, u32 xclk) +{ + if (xclk > XCLK_MAX || xclk < XCLK_MIN) + return -EINVAL; + + return 0; +} + +static int ioctl_queryctrl(struct v4l2_int_device *s, + struct v4l2_queryctrl *qc) +{ + struct vcontrol *control; + + control = find_vctrl(qc->id); + + if (control == NULL) + return -EINVAL; + + *qc = control->qc; + + return 0; +} + +static int ioctl_g_ctrl(struct v4l2_int_device *s, + struct v4l2_control *vc) +{ + struct tcm825x_sensor *sensor = s->priv; + struct i2c_client *client = sensor->i2c_client; + int val, r; + struct vcontrol *lvc; + + /* exposure time is special, spread accross 2 registers */ + if (vc->id == V4L2_CID_EXPOSURE) { + int val_lower, val_upper; + + val_upper = tcm825x_read_reg(client, + TCM825X_ADDR(TCM825X_ESRSPD_U)); + if (val_upper < 0) + return val_upper; + val_lower = tcm825x_read_reg(client, + TCM825X_ADDR(TCM825X_ESRSPD_L)); + if (val_lower < 0) + return val_lower; + + vc->value = ((val_upper & 0x1f) << 8) | (val_lower); + return 0; + } + + lvc = find_vctrl(vc->id); + if (lvc == NULL) + return -EINVAL; + + r = tcm825x_read_reg(client, TCM825X_ADDR(lvc->reg)); + if (r < 0) + return r; + val = r & TCM825X_MASK(lvc->reg); + val >>= lvc->start_bit; + + if (val < 0) + return val; + + vc->value = val; + return 0; +} + +static int ioctl_s_ctrl(struct v4l2_int_device *s, + struct v4l2_control *vc) +{ + struct tcm825x_sensor *sensor = s->priv; + struct i2c_client *client = sensor->i2c_client; + struct vcontrol *lvc; + int val = vc->value; + + /* exposure time is special, spread accross 2 registers */ + if (vc->id == V4L2_CID_EXPOSURE) { + int val_lower, val_upper; + val_lower = val & TCM825X_MASK(TCM825X_ESRSPD_L); + val_upper = (val >> 8) & TCM825X_MASK(TCM825X_ESRSPD_U); + + if (tcm825x_write_reg_mask(client, + TCM825X_ESRSPD_U, val_upper)) + return -EIO; + + if (tcm825x_write_reg_mask(client, + TCM825X_ESRSPD_L, val_lower)) + return -EIO; + + return 0; + } + + lvc = find_vctrl(vc->id); + if (lvc == NULL) + return -EINVAL; + + val = val << lvc->start_bit; + if (tcm825x_write_reg_mask(client, lvc->reg, val)) + return -EIO; + + return 0; +} + +static int ioctl_enum_fmt_cap(struct v4l2_int_device *s, + struct v4l2_fmtdesc *fmt) +{ + int index = fmt->index; + + switch (fmt->type) { + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + if (index >= TCM825X_NUM_CAPTURE_FORMATS) + return -EINVAL; + break; + + default: + return -EINVAL; + } + + fmt->flags = tcm825x_formats[index].flags; + strlcpy(fmt->description, tcm825x_formats[index].description, + sizeof(fmt->description)); + fmt->pixelformat = tcm825x_formats[index].pixelformat; + + return 0; +} + +static int ioctl_try_fmt_cap(struct v4l2_int_device *s, + struct v4l2_format *f) +{ + struct tcm825x_sensor *sensor = s->priv; + enum image_size isize; + int ifmt; + struct v4l2_pix_format *pix = &f->fmt.pix; + + isize = tcm825x_find_size(s, pix->width, pix->height); + dev_dbg(&sensor->i2c_client->dev, "isize = %d num_capture = %d\n", + isize, TCM825X_NUM_CAPTURE_FORMATS); + + pix->width = tcm825x_sizes[isize].width; + pix->height = tcm825x_sizes[isize].height; + + for (ifmt = 0; ifmt < TCM825X_NUM_CAPTURE_FORMATS; ifmt++) + if (pix->pixelformat == tcm825x_formats[ifmt].pixelformat) + break; + + if (ifmt == TCM825X_NUM_CAPTURE_FORMATS) + ifmt = 0; /* Default = YUV 4:2:2 */ + + pix->pixelformat = tcm825x_formats[ifmt].pixelformat; + pix->field = V4L2_FIELD_NONE; + pix->bytesperline = pix->width * TCM825X_BYTES_PER_PIXEL; + pix->sizeimage = pix->bytesperline * pix->height; + pix->priv = 0; + dev_dbg(&sensor->i2c_client->dev, "format = 0x%08x\n", + pix->pixelformat); + + switch (pix->pixelformat) { + case V4L2_PIX_FMT_UYVY: + default: + pix->colorspace = V4L2_COLORSPACE_JPEG; + break; + case V4L2_PIX_FMT_RGB565: + pix->colorspace = V4L2_COLORSPACE_SRGB; + break; + } + + return 0; +} + +static int ioctl_s_fmt_cap(struct v4l2_int_device *s, + struct v4l2_format *f) +{ + struct tcm825x_sensor *sensor = s->priv; + struct v4l2_pix_format *pix = &f->fmt.pix; + int rval; + + rval = ioctl_try_fmt_cap(s, f); + if (rval) + return rval; + + rval = tcm825x_configure(s); + + sensor->pix = *pix; + + return rval; +} + +static int ioctl_g_fmt_cap(struct v4l2_int_device *s, + struct v4l2_format *f) +{ + struct tcm825x_sensor *sensor = s->priv; + + f->fmt.pix = sensor->pix; + + return 0; +} + +static int ioctl_g_parm(struct v4l2_int_device *s, + struct v4l2_streamparm *a) +{ + struct tcm825x_sensor *sensor = s->priv; + struct v4l2_captureparm *cparm = &a->parm.capture; + + if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + memset(a, 0, sizeof(*a)); + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + + cparm->capability = V4L2_CAP_TIMEPERFRAME; + cparm->timeperframe = sensor->timeperframe; + + return 0; +} + +static int ioctl_s_parm(struct v4l2_int_device *s, + struct v4l2_streamparm *a) +{ + struct tcm825x_sensor *sensor = s->priv; + struct v4l2_fract *timeperframe = &a->parm.capture.timeperframe; + u32 tgt_fps; /* target frames per secound */ + int rval; + + if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if ((timeperframe->numerator == 0) + || (timeperframe->denominator == 0)) { + timeperframe->denominator = DEFAULT_FPS; + timeperframe->numerator = 1; + } + + tgt_fps = timeperframe->denominator / timeperframe->numerator; + + if (tgt_fps > MAX_FPS) { + timeperframe->denominator = MAX_FPS; + timeperframe->numerator = 1; + } else if (tgt_fps < MIN_FPS) { + timeperframe->denominator = MIN_FPS; + timeperframe->numerator = 1; + } + + sensor->timeperframe = *timeperframe; + + rval = tcm825x_configure(s); + + return rval; +} + +static int ioctl_s_power(struct v4l2_int_device *s, int on) +{ + struct tcm825x_sensor *sensor = s->priv; + + return sensor->platform_data->power_set(on); +} + +static int ioctl_g_needs_reset(struct v4l2_int_device *s, void *buf) +{ + struct tcm825x_sensor *sensor = s->priv; + + return sensor->platform_data->needs_reset(s, buf, &sensor->pix); +} + +static int ioctl_reset(struct v4l2_int_device *s) +{ + return -EBUSY; +} + +static int ioctl_init(struct v4l2_int_device *s) +{ + return tcm825x_configure(s); +} + +static int ioctl_dev_exit(struct v4l2_int_device *s) +{ + return 0; +} + +static int ioctl_dev_init(struct v4l2_int_device *s) +{ + struct tcm825x_sensor *sensor = s->priv; + int r; + + r = tcm825x_read_reg(sensor->i2c_client, 0x01); + if (r < 0) + return r; + if (r == 0) { + dev_err(&sensor->i2c_client->dev, "device not detected\n"); + return -EIO; + } + return 0; +} + +#define NUM_IOCTLS 17 + +static struct v4l2_int_ioctl_desc tcm825x_ioctl_desc[NUM_IOCTLS] = { + { vidioc_int_dev_init_num, + (v4l2_int_ioctl_func *)&ioctl_dev_init }, + { vidioc_int_dev_exit_num, + (v4l2_int_ioctl_func *)&ioctl_dev_exit }, + { vidioc_int_s_power_num, + (v4l2_int_ioctl_func *)&ioctl_s_power }, + { vidioc_int_g_ext_clk_num, + (v4l2_int_ioctl_func *)&ioctl_g_ext_clk }, + { vidioc_int_s_ext_clk_num, + (v4l2_int_ioctl_func *)&ioctl_s_ext_clk }, + { vidioc_int_g_needs_reset_num, + (v4l2_int_ioctl_func *)&ioctl_g_needs_reset }, + { vidioc_int_reset_num, + (v4l2_int_ioctl_func *)&ioctl_reset }, + { vidioc_int_init_num, + (v4l2_int_ioctl_func *)&ioctl_init }, + { vidioc_int_enum_fmt_cap_num, + (v4l2_int_ioctl_func *)&ioctl_enum_fmt_cap }, + { vidioc_int_try_fmt_cap_num, + (v4l2_int_ioctl_func *)&ioctl_try_fmt_cap }, + { vidioc_int_g_fmt_cap_num, + (v4l2_int_ioctl_func *)&ioctl_g_fmt_cap }, + { vidioc_int_s_fmt_cap_num, + (v4l2_int_ioctl_func *)&ioctl_s_fmt_cap }, + { vidioc_int_g_parm_num, + (v4l2_int_ioctl_func *)&ioctl_g_parm }, + { vidioc_int_s_parm_num, + (v4l2_int_ioctl_func *)&ioctl_s_parm }, + { vidioc_int_queryctrl_num, + (v4l2_int_ioctl_func *)&ioctl_queryctrl }, + { vidioc_int_g_ctrl_num, + (v4l2_int_ioctl_func *)&ioctl_g_ctrl }, + { vidioc_int_s_ctrl_num, + (v4l2_int_ioctl_func *)&ioctl_s_ctrl }, +}; + +static struct v4l2_int_slave tcm825x_slave = { + .ioctls = tcm825x_ioctl_desc, + .num_ioctls = ARRAY_SIZE(tcm825x_ioctl_desc), +}; + +static struct tcm825x_sensor tcm825x; + +static struct v4l2_int_device tcm825x_int_device = { + .module = THIS_MODULE, + .name = TCM825X_NAME, + .priv = &tcm825x, + .type = v4l2_int_type_slave, + .u = { + .slave = &tcm825x_slave, + }, +}; + +static int tcm825x_probe(struct i2c_client *client) +{ + struct tcm825x_sensor *sensor = &tcm825x; + int rval; + + if (i2c_get_clientdata(client)) + return -EBUSY; + + sensor->platform_data = client->dev.platform_data; + + if (sensor->platform_data == NULL + && !sensor->platform_data->is_okay()) + return -ENODEV; + + sensor->v4l2_int_device = &tcm825x_int_device; + + sensor->i2c_client = client; + i2c_set_clientdata(client, sensor); + + /* Make the default capture format QVGA RGB565 */ + sensor->pix.width = tcm825x_sizes[QVGA].width; + sensor->pix.height = tcm825x_sizes[QVGA].height; + sensor->pix.pixelformat = V4L2_PIX_FMT_RGB565; + + rval = v4l2_int_device_register(sensor->v4l2_int_device); + if (rval) + i2c_set_clientdata(client, NULL); + + return rval; +} + +static int __exit tcm825x_remove(struct i2c_client *client) +{ + struct tcm825x_sensor *sensor = i2c_get_clientdata(client); + + if (!client->adapter) + return -ENODEV; /* our client isn't attached */ + + v4l2_int_device_unregister(sensor->v4l2_int_device); + i2c_set_clientdata(client, NULL); + + return 0; +} + +static struct i2c_driver tcm825x_i2c_driver = { + .driver = { + .name = TCM825X_NAME, + }, + .probe = &tcm825x_probe, + .remove = __exit_p(&tcm825x_remove), +}; + +static struct tcm825x_sensor tcm825x = { + .timeperframe = { + .numerator = 1, + .denominator = DEFAULT_FPS, + }, +}; + +static int __init tcm825x_init(void) +{ + int rval; + int i = 0; + + /* Just an experiment --- don't use *_cb functions yet. */ + tcm825x_ioctl_desc[i++] = vidioc_int_dev_init_cb(&ioctl_dev_init); + BUG_ON(i >= NUM_IOCTLS); + + rval = i2c_add_driver(&tcm825x_i2c_driver); + if (rval) + printk(KERN_INFO "%s: failed registering " TCM825X_NAME "\n", + __FUNCTION__); + + return rval; +} + +static void __exit tcm825x_exit(void) +{ + i2c_del_driver(&tcm825x_i2c_driver); +} + +/* + * FIXME: Menelaus isn't ready (?) at module_init stage, so use + * late_initcall for now. + */ +late_initcall(tcm825x_init); +module_exit(tcm825x_exit); + +MODULE_AUTHOR("Sakari Ailus "); +MODULE_DESCRIPTION("TCM825x camera sensor driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/tcm825x.h b/drivers/media/video/tcm825x.h new file mode 100644 index 000000000000..d6471ec40bc5 --- /dev/null +++ b/drivers/media/video/tcm825x.h @@ -0,0 +1,195 @@ +/* + * drivers/media/video/tcm825x.h + * + * Register definitions for the TCM825X CameraChip. + * + * Author: David Cohen (david.cohen@indt.org.br) + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + * + * This file was based on ov9640.h from MontaVista + */ + +#ifndef TCM825X_H +#define TCM825X_H + +#include + +#include + +#define TCM825X_NAME "tcm825x" + +#define TCM825X_MASK(x) x & 0x00ff +#define TCM825X_ADDR(x) (x & 0xff00) >> 8 + +/* The TCM825X I2C sensor chip has a fixed slave address of 0x3d. */ +#define TCM825X_I2C_ADDR 0x3d + +/* + * define register offsets for the TCM825X sensor chip + * OFFSET(8 bits) + MASK(8 bits) + * MASK bit 4 and 3 are used when the register uses more than one address + */ +#define TCM825X_FPS 0x0280 +#define TCM825X_ACF 0x0240 +#define TCM825X_DOUTBUF 0x020C +#define TCM825X_DCLKP 0x0202 +#define TCM825X_ACFDET 0x0201 +#define TCM825X_DOUTSW 0x0380 +#define TCM825X_DATAHZ 0x0340 +#define TCM825X_PICSIZ 0x033c +#define TCM825X_PICFMT 0x0302 +#define TCM825X_V_INV 0x0480 +#define TCM825X_H_INV 0x0440 +#define TCM825X_ESRLSW 0x0430 +#define TCM825X_V_LENGTH 0x040F +#define TCM825X_ALCSW 0x0580 +#define TCM825X_ESRLIM 0x0560 +#define TCM825X_ESRSPD_U 0x051F +#define TCM825X_ESRSPD_L 0x06FF +#define TCM825X_AG 0x07FF +#define TCM825X_ESRSPD2 0x06FF +#define TCM825X_ALCMODE 0x0830 +#define TCM825X_ALCH 0x080F +#define TCM825X_ALCL 0x09FF +#define TCM825X_AWBSW 0x0A80 +#define TCM825X_MRG 0x0BFF +#define TCM825X_MBG 0x0CFF +#define TCM825X_GAMSW 0x0D80 +#define TCM825X_HDTG 0x0EFF +#define TCM825X_VDTG 0x0FFF +#define TCM825X_HDTCORE 0x10F0 +#define TCM825X_VDTCORE 0x100F +#define TCM825X_CONT 0x11FF +#define TCM825X_BRIGHT 0x12FF +#define TCM825X_VHUE 0x137F +#define TCM825X_UHUE 0x147F +#define TCM825X_VGAIN 0x153F +#define TCM825X_UGAIN 0x163F +#define TCM825X_UVCORE 0x170F +#define TCM825X_SATU 0x187F +#define TCM825X_MHMODE 0x1980 +#define TCM825X_MHLPFSEL 0x1940 +#define TCM825X_YMODE 0x1930 +#define TCM825X_MIXHG 0x1907 +#define TCM825X_LENS 0x1A3F +#define TCM825X_AGLIM 0x1BE0 +#define TCM825X_LENSRPOL 0x1B10 +#define TCM825X_LENSRGAIN 0x1B0F +#define TCM825X_ES100S 0x1CFF +#define TCM825X_ES120S 0x1DFF +#define TCM825X_DMASK 0x1EC0 +#define TCM825X_CODESW 0x1E20 +#define TCM825X_CODESEL 0x1E10 +#define TCM825X_TESPIC 0x1E04 +#define TCM825X_PICSEL 0x1E03 +#define TCM825X_HNUM 0x20FF +#define TCM825X_VOUTPH 0x287F +#define TCM825X_ESROUT 0x327F +#define TCM825X_ESROUT2 0x33FF +#define TCM825X_AGOUT 0x34FF +#define TCM825X_DGOUT 0x353F +#define TCM825X_AGSLOW1 0x39C0 +#define TCM825X_FLLSMODE 0x3930 +#define TCM825X_FLLSLIM 0x390F +#define TCM825X_DETSEL 0x3AF0 +#define TCM825X_ACDETNC 0x3A0F +#define TCM825X_AGSLOW2 0x3BC0 +#define TCM825X_DG 0x3B3F +#define TCM825X_REJHLEV 0x3CFF +#define TCM825X_ALCLOCK 0x3D80 +#define TCM825X_FPSLNKSW 0x3D40 +#define TCM825X_ALCSPD 0x3D30 +#define TCM825X_REJH 0x3D03 +#define TCM825X_SHESRSW 0x3E80 +#define TCM825X_ESLIMSEL 0x3E40 +#define TCM825X_SHESRSPD 0x3E30 +#define TCM825X_ELSTEP 0x3E0C +#define TCM825X_ELSTART 0x3E03 +#define TCM825X_AGMIN 0x3FFF +#define TCM825X_PREGRG 0x423F +#define TCM825X_PREGBG 0x433F +#define TCM825X_PRERG 0x443F +#define TCM825X_PREBG 0x453F +#define TCM825X_MSKBR 0x477F +#define TCM825X_MSKGR 0x487F +#define TCM825X_MSKRB 0x497F +#define TCM825X_MSKGB 0x4A7F +#define TCM825X_MSKRG 0x4B7F +#define TCM825X_MSKBG 0x4C7F +#define TCM825X_HDTCSW 0x4D80 +#define TCM825X_VDTCSW 0x4D40 +#define TCM825X_DTCYL 0x4D3F +#define TCM825X_HDTPSW 0x4E80 +#define TCM825X_VDTPSW 0x4E40 +#define TCM825X_DTCGAIN 0x4E3F +#define TCM825X_DTLLIMSW 0x4F10 +#define TCM825X_DTLYLIM 0x4F0F +#define TCM825X_YLCUTLMSK 0x5080 +#define TCM825X_YLCUTL 0x503F +#define TCM825X_YLCUTHMSK 0x5180 +#define TCM825X_YLCUTH 0x513F +#define TCM825X_UVSKNC 0x527F +#define TCM825X_UVLJ 0x537F +#define TCM825X_WBGMIN 0x54FF +#define TCM825X_WBGMAX 0x55FF +#define TCM825X_WBSPDUP 0x5603 +#define TCM825X_ALLAREA 0x5820 +#define TCM825X_WBLOCK 0x5810 +#define TCM825X_WB2SP 0x580F +#define TCM825X_KIZUSW 0x5920 +#define TCM825X_PBRSW 0x5910 +#define TCM825X_ABCSW 0x5903 +#define TCM825X_PBDLV 0x5AFF +#define TCM825X_PBC1LV 0x5BFF + +#define TCM825X_NUM_REGS (TCM825X_ADDR(TCM825X_PBC1LV) + 1) + +#define TCM825X_BYTES_PER_PIXEL 2 + +#define TCM825X_REG_TERM 0xff /* terminating list entry for reg */ +#define TCM825X_VAL_TERM 0xff /* terminating list entry for val */ + +/* define a structure for tcm825x register initialization values */ +struct tcm825x_reg { + u8 val; + u16 reg; +}; + +enum image_size { subQCIF = 0, QQVGA, QCIF, QVGA, CIF, VGA }; +enum pixel_format { YUV422 = 0, RGB565 }; +#define NUM_IMAGE_SIZES 6 +#define NUM_PIXEL_FORMATS 2 + +struct capture_size { + unsigned long width; + unsigned long height; +}; + +struct tcm825x_platform_data { + /* Is the sensor usable? Doesn't yet mean it's there, but you + * can try! */ + int (*is_okay)(void); + /* Set power state, zero is off, non-zero is on. */ + int (*power_set)(int power); + /* Default registers written after power-on or reset. */ + const struct tcm825x_reg *(*default_regs)(void); + int (*needs_reset)(struct v4l2_int_device *s, void *buf, + struct v4l2_pix_format *fmt); +}; + +/* Array of image sizes supported by TCM825X. These must be ordered from + * smallest image size to largest. + */ +const static struct capture_size tcm825x_sizes[] = { + { 128, 96 }, /* subQCIF */ + { 160, 120 }, /* QQVGA */ + { 176, 144 }, /* QCIF */ + { 320, 240 }, /* QVGA */ + { 352, 288 }, /* CIF */ + { 640, 480 }, /* VGA */ +}; + +#endif /* ifndef TCM825X_H */ -- 2.34.1