From aa66a5f1af163b6c90fca5a06c7fdab121b70cd2 Mon Sep 17 00:00:00 2001 From: hayeswang Date: Tue, 18 Feb 2014 21:49:04 +0800 Subject: [PATCH] r8152: combine PHY reset with set_speed PHY reset is necessary after some hw settings. However, it would cause the linking down, and so does the set_speed function. Combine the PHY reset with set_speed function. That could reduce the frequency of linking down and accessing the PHY register. Signed-off-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 57 ++++++++++++++++++++++++++++++++--------- 1 file changed, 45 insertions(+), 12 deletions(-) diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index c7bae3920038..b3155da97f09 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -436,6 +436,7 @@ enum rtl8152_flags { RTL8152_SET_RX_MODE, WORK_ENABLE, RTL8152_LINK_CHG, + PHY_RESET, }; /* Define these values to match your device */ @@ -1796,6 +1797,29 @@ static void r8152_power_cut_en(struct r8152 *tp, bool enable) } +static void rtl_phy_reset(struct r8152 *tp) +{ + u16 data; + int i; + + clear_bit(PHY_RESET, &tp->flags); + + data = r8152_mdio_read(tp, MII_BMCR); + + /* don't reset again before the previous one complete */ + if (data & BMCR_RESET) + return; + + data |= BMCR_RESET; + r8152_mdio_write(tp, MII_BMCR, data); + + for (i = 0; i < 50; i++) { + msleep(20); + if ((r8152_mdio_read(tp, MII_BMCR) & BMCR_RESET) == 0) + break; + } +} + static void rtl_clear_bp(struct r8152 *tp) { ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_0, 0); @@ -1854,6 +1878,7 @@ static void r8152b_hw_phy_cfg(struct r8152 *tp) } r8152b_disable_aldps(tp); + set_bit(PHY_RESET, &tp->flags); } static void r8152b_exit_oob(struct r8152 *tp) @@ -2042,6 +2067,8 @@ static void r8153_hw_phy_cfg(struct r8152 *tp) data = sram_read(tp, SRAM_10M_AMP2); data |= AMP_DN; sram_write(tp, SRAM_10M_AMP2, data); + + set_bit(PHY_RESET, &tp->flags); } static void r8153_u1u2en(struct r8152 *tp, bool enable) @@ -2295,12 +2322,26 @@ static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u16 speed, u8 duplex) bmcr = BMCR_ANENABLE | BMCR_ANRESTART; } + if (test_bit(PHY_RESET, &tp->flags)) + bmcr |= BMCR_RESET; + if (tp->mii.supports_gmii) r8152_mdio_write(tp, MII_CTRL1000, gbcr); r8152_mdio_write(tp, MII_ADVERTISE, anar); r8152_mdio_write(tp, MII_BMCR, bmcr); + if (test_bit(PHY_RESET, &tp->flags)) { + int i; + + clear_bit(PHY_RESET, &tp->flags); + for (i = 0; i < 50; i++) { + msleep(20); + if ((r8152_mdio_read(tp, MII_BMCR) & BMCR_RESET) == 0) + break; + } + } + out: return ret; @@ -2364,6 +2405,10 @@ static void rtl_work_func_t(struct work_struct *work) if (test_bit(RTL8152_SET_RX_MODE, &tp->flags)) _rtl8152_set_rx_mode(tp->netdev); + + if (test_bit(PHY_RESET, &tp->flags)) + rtl_phy_reset(tp); + out1: return; } @@ -2459,7 +2504,6 @@ static void r8152b_enable_fc(struct r8152 *tp) static void r8152b_init(struct r8152 *tp) { u32 ocp_data; - int i; rtl_clear_bp(tp); @@ -2491,14 +2535,6 @@ static void r8152b_init(struct r8152 *tp) r8152b_enable_aldps(tp); r8152b_enable_fc(tp); - r8152_mdio_write(tp, MII_BMCR, BMCR_RESET | BMCR_ANENABLE | - BMCR_ANRESTART); - for (i = 0; i < 100; i++) { - udelay(100); - if (!(r8152_mdio_read(tp, MII_BMCR) & BMCR_RESET)) - break; - } - /* enable rx aggregation */ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL); ocp_data &= ~RX_AGG_DISABLE; @@ -2569,9 +2605,6 @@ static void r8153_init(struct r8152 *tp) r8153_enable_eee(tp); r8153_enable_aldps(tp); r8152b_enable_fc(tp); - - r8152_mdio_write(tp, MII_BMCR, BMCR_RESET | BMCR_ANENABLE | - BMCR_ANRESTART); } static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message) -- 2.34.1