From af31a227e1abee06ccd88c2c52f4fb36b786cebe Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 26 Apr 2012 20:06:56 +0100 Subject: [PATCH] ASoC: wm_hubs: Special case headphones for digital paths in more use cases The optimisations which we can do with caching the headphone DCS result in wm_hubs have only been enabled in cases where class W is enabled. However, there are more use cases which can benefit from the cache, especially with WM8994 series devices with their more advanced digital routing. Rather than keying off the class W information from the CODECs have a check in wm_hubs for a suitable path and use that to determine if we can deploy our headphone optimisations. Signed-off-by: Mark Brown --- sound/soc/codecs/wm8993.c | 2 -- sound/soc/codecs/wm8994.c | 4 +--- sound/soc/codecs/wm_hubs.c | 48 +++++++++++++++++++++++++++++++++----- sound/soc/codecs/wm_hubs.h | 5 ++-- 4 files changed, 45 insertions(+), 14 deletions(-) diff --git a/sound/soc/codecs/wm8993.c b/sound/soc/codecs/wm8993.c index d256a9340644..8bb005926aa0 100644 --- a/sound/soc/codecs/wm8993.c +++ b/sound/soc/codecs/wm8993.c @@ -852,7 +852,6 @@ static int class_w_put(struct snd_kcontrol *kcontrol, 0); } wm8993->class_w_users++; - wm8993->hubs_data.class_w = true; } /* Implement the change */ @@ -869,7 +868,6 @@ static int class_w_put(struct snd_kcontrol *kcontrol, WM8993_CP_DYN_V); } wm8993->class_w_users--; - wm8993->hubs_data.class_w = false; } dev_dbg(codec->dev, "Indirect DAC use count now %d\n", diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index a22c29386243..2475e1c10334 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -998,13 +998,11 @@ static void wm8994_update_class_w(struct snd_soc_codec *codec) WM8994_CP_DYN_PWR | WM8994_CP_DYN_SRC_SEL_MASK, source | WM8994_CP_DYN_PWR); - wm8994->hubs.class_w = true; } else { dev_dbg(codec->dev, "Class W disabled\n"); snd_soc_update_bits(codec, WM8994_CLASS_W_1, WM8994_CP_DYN_PWR, 0); - wm8994->hubs.class_w = false; } } @@ -3609,7 +3607,7 @@ static int wm8994_codec_probe(struct snd_soc_codec *codec) wm8994->hubs.dcs_readback_mode = 2; wm8994->hubs.no_series_update = 1; wm8994->hubs.hp_startup_mode = 1; - wm8994->hubs.no_cache_class_w = true; + wm8994->hubs.no_cache_dac_hp_direct = true; wm8994->fll_byp = true; switch (wm8994->revision) { diff --git a/sound/soc/codecs/wm_hubs.c b/sound/soc/codecs/wm_hubs.c index f13f2886339c..15aed8b7d981 100644 --- a/sound/soc/codecs/wm_hubs.c +++ b/sound/soc/codecs/wm_hubs.c @@ -109,6 +109,42 @@ irqreturn_t wm_hubs_dcs_done(int irq, void *data) } EXPORT_SYMBOL_GPL(wm_hubs_dcs_done); +static bool wm_hubs_dac_hp_direct(struct snd_soc_codec *codec) +{ + int reg; + + /* If we're going via the mixer we'll need to do additional checks */ + reg = snd_soc_read(codec, WM8993_OUTPUT_MIXER1); + if (!(reg & WM8993_DACL_TO_HPOUT1L)) { + if (reg & ~WM8993_DACL_TO_MIXOUTL) { + dev_vdbg(codec->dev, "Analogue paths connected: %x\n", + reg & ~WM8993_DACL_TO_HPOUT1L); + return false; + } else { + dev_vdbg(codec->dev, "HPL connected to mixer\n"); + return false; + } + } else { + dev_vdbg(codec->dev, "HPL connected to DAC\n"); + } + + reg = snd_soc_read(codec, WM8993_OUTPUT_MIXER2); + if (!(reg & WM8993_DACR_TO_HPOUT1R)) { + if (reg & ~WM8993_DACR_TO_MIXOUTR) { + dev_vdbg(codec->dev, "Analogue paths connected: %x\n", + reg & ~WM8993_DACR_TO_HPOUT1R); + return false; + } else { + dev_vdbg(codec->dev, "HPR connected to mixer\n"); + return false; + } + } else { + dev_vdbg(codec->dev, "HPR connected to DAC\n"); + } + + return true; +} + /* * Startup calibration of the DC servo */ @@ -129,10 +165,10 @@ static void calibrate_dc_servo(struct snd_soc_codec *codec) /* If we're using a digital only path and have a previously * callibrated DC servo offset stored then use that. */ - if (hubs->class_w && hubs->class_w_dcs) { + if (wm_hubs_dac_hp_direct(codec) && hubs->dac_hp_direct_dcs) { dev_dbg(codec->dev, "Using cached DC servo offset %x\n", - hubs->class_w_dcs); - snd_soc_write(codec, dcs_reg, hubs->class_w_dcs); + hubs->dac_hp_direct_dcs); + snd_soc_write(codec, dcs_reg, hubs->dac_hp_direct_dcs); wait_for_dc_servo(codec, WM8993_DCS_TRIG_DAC_WR_0 | WM8993_DCS_TRIG_DAC_WR_1); @@ -207,8 +243,8 @@ static void calibrate_dc_servo(struct snd_soc_codec *codec) /* Save the callibrated offset if we're in class W mode and * therefore don't have any analogue signal mixed in. */ - if (hubs->class_w && !hubs->no_cache_class_w) - hubs->class_w_dcs = dcs_cfg; + if (wm_hubs_dac_hp_direct(codec) && !hubs->no_cache_dac_hp_direct) + hubs->dac_hp_direct_dcs = dcs_cfg; } /* @@ -224,7 +260,7 @@ static int wm8993_put_dc_servo(struct snd_kcontrol *kcontrol, ret = snd_soc_put_volsw(kcontrol, ucontrol); /* Updating the analogue gains invalidates the DC servo cache */ - hubs->class_w_dcs = 0; + hubs->dac_hp_direct_dcs = 0; /* If we're applying an offset correction then updating the * callibration would be likely to introduce further offsets. */ diff --git a/sound/soc/codecs/wm_hubs.h b/sound/soc/codecs/wm_hubs.h index 5705276f4943..8bb9f1b51bf3 100644 --- a/sound/soc/codecs/wm_hubs.h +++ b/sound/soc/codecs/wm_hubs.h @@ -30,9 +30,8 @@ struct wm_hubs_data { int series_startup; int no_series_update; - bool no_cache_class_w; - bool class_w; - u16 class_w_dcs; + bool no_cache_dac_hp_direct; + u16 dac_hp_direct_dcs; bool lineout1_se; bool lineout1n_ena; -- 2.34.1