From af4d191e44c9b0ad40b248902881710b117844fb Mon Sep 17 00:00:00 2001 From: Peter Griffin Date: Wed, 10 Jun 2015 16:04:00 +0200 Subject: [PATCH] ARM: STi: DT: Add STiH407 family tsin4 pinctrl configuration tsin4 can only be configured for serial data transfer. However depending on board design, two alternate pin configurations are available. One in pin-controller-front0 and the other in pin-controller-front1. pinctrl_tsin4_serial_alt3 is brought out on B2120 reference design as TSC on NIMA slot of the B2004A daughter board. Signed-off-by: Peter Griffin Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih407-pinctrl.dtsi | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi index 760f925e1dcc..50b5bed50d21 100644 --- a/arch/arm/boot/dts/stih407-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi @@ -535,6 +535,18 @@ }; }; }; + + tsin4 { + pinctrl_tsin4_serial_alt3: tsin4_serial_alt3 { + st,pins { + DATA7 = <&pio14 6 ALT3 IN SE_NICLK_IO 0 CLK_A>; + CLKIN = <&pio14 5 ALT3 IN CLKNOTDATA 0 CLK_A>; + VALID = <&pio14 3 ALT3 IN SE_NICLK_IO 0 CLK_B>; + ERROR = <&pio14 2 ALT3 IN SE_NICLK_IO 0 CLK_B>; + PKCLK = <&pio14 4 ALT3 IN SE_NICLK_IO 0 CLK_A>; + }; + }; + }; }; pin-controller-front1 { @@ -548,6 +560,18 @@ interrupts-names = "irqmux"; ranges = <0 0x09210000 0x10000>; + tsin4 { + pinctrl_tsin4_serial_alt1: tsin4_serial_alt1 { + st,pins { + DATA7 = <&pio20 4 ALT1 IN SE_NICLK_IO 0 CLK_A>; + CLKIN = <&pio20 3 ALT1 IN CLKNOTDATA 0 CLK_A>; + VALID = <&pio20 1 ALT1 IN SE_NICLK_IO 0 CLK_A>; + ERROR = <&pio20 0 ALT1 IN SE_NICLK_IO 0 CLK_A>; + PKCLK = <&pio20 2 ALT1 IN SE_NICLK_IO 0 CLK_A>; + }; + }; + }; + pio20: pio@09210000 { gpio-controller; #gpio-cells = <1>; -- 2.34.1