From afe3f907d20f39c0eaf81f2baec247ba672f34a9 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 8 Jun 2015 10:47:57 -0700 Subject: [PATCH] net: bcmgenet: power on MII block for all MII modes The RGMII block is currently only powered on when using RGMII or RGMII_NO_ID, which is not correct when using the GENET interface in MII or Reverse MII modes. We always need to power on the RGMII interface for this block to properly work, regardless of the MII mode in which we operate. Fixes: aa09677cba423 ("net: bcmgenet: add MDIO routines") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/genet/bcmmii.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c index e7651b3c6c57..420949cc55aa 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmmii.c +++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c @@ -299,9 +299,6 @@ int bcmgenet_mii_config(struct net_device *dev, bool init) phy_name = "external RGMII (no delay)"; else phy_name = "external RGMII (TX delay)"; - reg = bcmgenet_ext_readl(priv, EXT_RGMII_OOB_CTRL); - reg |= RGMII_MODE_EN | id_mode_dis; - bcmgenet_ext_writel(priv, reg, EXT_RGMII_OOB_CTRL); bcmgenet_sys_writel(priv, PORT_MODE_EXT_GPHY, SYS_PORT_CTRL); break; @@ -310,6 +307,15 @@ int bcmgenet_mii_config(struct net_device *dev, bool init) return -EINVAL; } + /* This is an external PHY (xMII), so we need to enable the RGMII + * block for the interface to work + */ + if (priv->ext_phy) { + reg = bcmgenet_ext_readl(priv, EXT_RGMII_OOB_CTRL); + reg |= RGMII_MODE_EN | id_mode_dis; + bcmgenet_ext_writel(priv, reg, EXT_RGMII_OOB_CTRL); + } + if (init) dev_info(kdev, "configuring instance for %s\n", phy_name); -- 2.34.1