From b4336a282db86b298b70563f8ed51782b36b772c Mon Sep 17 00:00:00 2001 From: Andreas Fenkart Date: Thu, 16 Jul 2015 18:50:01 +0200 Subject: [PATCH] mwifiex: sdio: reset adapter using mmc_hw_reset Since 1fb654fd97ff("mmc: sdio: add reset callback to bus operations"), sdio cards can be power cycled using mmc_hw_reset. The use mmc_remove_host/mmc_add_host is discouraged, because these are internal functions to the mmc core and should only be used by mmc hosts Signed-off-by: Andreas Fenkart Acked-by: Amitkumar Karwar Signed-off-by: Kalle Valo --- drivers/net/wireless/mwifiex/sdio.c | 51 ++++++++++++++++++++--------- drivers/net/wireless/mwifiex/sdio.h | 3 ++ 2 files changed, 39 insertions(+), 15 deletions(-) diff --git a/drivers/net/wireless/mwifiex/sdio.c b/drivers/net/wireless/mwifiex/sdio.c index a0b121f3460c..e4c35ee12782 100644 --- a/drivers/net/wireless/mwifiex/sdio.c +++ b/drivers/net/wireless/mwifiex/sdio.c @@ -91,6 +91,7 @@ mwifiex_sdio_probe(struct sdio_func *func, const struct sdio_device_id *id) return -ENOMEM; card->func = func; + card->device_id = id; func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE; @@ -2107,26 +2108,46 @@ mwifiex_update_mp_end_port(struct mwifiex_adapter *adapter, u16 port) port, card->mp_data_port_mask); } +static void mwifiex_recreate_adapter(struct sdio_mmc_card *card) +{ + struct sdio_func *func = card->func; + const struct sdio_device_id *device_id = card->device_id; + + /* TODO mmc_hw_reset does not require destroying and re-probing the + * whole adapter. Hence there was no need to for this rube-goldberg + * design to reload the fw from an external workqueue. If we don't + * destroy the adapter we could reload the fw from + * mwifiex_main_work_queue directly. + * The real difficulty with fw reset is to restore all the user + * settings applied through ioctl. By destroying and recreating the + * adapter, we take the easy way out, since we rely on user space to + * restore them. We assume that user space will treat the new + * incarnation of the adapter(interfaces) as if they had been just + * discovered and initializes them from scratch. + */ + + mwifiex_sdio_remove(func); + + /* power cycle the adapter */ + sdio_claim_host(func); + mmc_hw_reset(func->card->host); + sdio_release_host(func); + + mwifiex_sdio_probe(func, device_id); +} + static struct mwifiex_adapter *save_adapter; static void mwifiex_sdio_card_reset_work(struct mwifiex_adapter *adapter) { struct sdio_mmc_card *card = adapter->card; - struct mmc_host *target = card->func->card->host; - - /* The actual reset operation must be run outside of driver thread. - * This is because mmc_remove_host() will cause the device to be - * instantly destroyed, and the driver then needs to end its thread, - * leading to a deadlock. - * - * We run it in a totally independent workqueue. - */ - mwifiex_dbg(adapter, WARN, "Resetting card...\n"); - mmc_remove_host(target); - /* 200ms delay is based on experiment with sdhci controller */ - mdelay(200); - target->rescan_entered = 0; /* rescan non-removable cards */ - mmc_add_host(target); + /* TODO card pointer is unprotected. If the adapter is removed + * physically, sdio core might trigger mwifiex_sdio_remove, before this + * workqueue is run, which will destroy the adapter struct. When this + * workqueue eventually exceutes it will dereference an invalid adapter + * pointer + */ + mwifiex_recreate_adapter(card); } /* This function read/write firmware */ diff --git a/drivers/net/wireless/mwifiex/sdio.h b/drivers/net/wireless/mwifiex/sdio.h index 6f645cf47369..c44da610541a 100644 --- a/drivers/net/wireless/mwifiex/sdio.h +++ b/drivers/net/wireless/mwifiex/sdio.h @@ -262,6 +262,9 @@ struct sdio_mmc_card { struct mwifiex_sdio_mpa_tx mpa_tx; struct mwifiex_sdio_mpa_rx mpa_rx; + + /* needed for card reset */ + const struct sdio_device_id *device_id; }; struct mwifiex_sdio_device { -- 2.34.1