From c349775e4c53aade9942ef1010b23f84dbaf9ac9 Mon Sep 17 00:00:00 2001 From: Scott Teel Date: Tue, 18 Feb 2014 13:56:34 -0600 Subject: [PATCH] [SCSI] hpsa: get ioaccel mode 2 i/o working Signed-off-by: Scott Teel Signed-off-by: Joe Handzik Signed-off-by: Mike Miller Signed-off-by: Stephen M. Cameron Signed-off-by: James Bottomley --- drivers/scsi/hpsa.c | 325 +++++++++++++++++++++++++++++++++++++--- drivers/scsi/hpsa.h | 20 +++ drivers/scsi/hpsa_cmd.h | 1 + 3 files changed, 327 insertions(+), 19 deletions(-) diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 05c4852567ea..7638317ea18a 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -222,6 +222,9 @@ static void hpsa_wait_for_mode_change_ack(struct ctlr_info *h); #define BOARD_READY 1 static void hpsa_drain_commands(struct ctlr_info *h); static void hpsa_flush_cache(struct ctlr_info *h); +static int hpsa_scsi_ioaccel_queue_command(struct ctlr_info *h, + struct CommandList *c, u32 ioaccel_handle, u8 *cdb, int cdb_len, + u8 *scsi3addr); static inline struct ctlr_info *sdev_to_hba(struct scsi_device *sdev) { @@ -622,6 +625,32 @@ static inline u32 next_command(struct ctlr_info *h, u8 q) return a; } +/* + * There are some special bits in the bus address of the + * command that we have to set for the controller to know + * how to process the command: + * + * Normal performant mode: + * bit 0: 1 means performant mode, 0 means simple mode. + * bits 1-3 = block fetch table entry + * bits 4-6 = command type (== 0) + * + * ioaccel1 mode: + * bit 0 = "performant mode" bit. + * bits 1-3 = block fetch table entry + * bits 4-6 = command type (== 110) + * (command type is needed because ioaccel1 mode + * commands are submitted through the same register as normal + * mode commands, so this is how the controller knows whether + * the command is normal mode or ioaccel1 mode.) + * + * ioaccel2 mode: + * bit 0 = "performant mode" bit. + * bits 1-4 = block fetch table entry (note extra bit) + * bits 4-6 = not needed, because ioaccel2 mode has + * a separate special register for submitting commands. + */ + /* set_performant_mode: Modify the tag for cciss performant * set bit 0 for pull model, bits 3-1 for block fetch * register number @@ -636,6 +665,41 @@ static void set_performant_mode(struct ctlr_info *h, struct CommandList *c) } } +static void set_ioaccel1_performant_mode(struct ctlr_info *h, + struct CommandList *c) +{ + struct io_accel1_cmd *cp = &h->ioaccel_cmd_pool[c->cmdindex]; + + /* Tell the controller to post the reply to the queue for this + * processor. This seems to give the best I/O throughput. + */ + cp->ReplyQueue = smp_processor_id() % h->nreply_queues; + /* Set the bits in the address sent down to include: + * - performant mode bit (bit 0) + * - pull count (bits 1-3) + * - command type (bits 4-6) + */ + c->busaddr |= 1 | (h->ioaccel1_blockFetchTable[c->Header.SGList] << 1) | + IOACCEL1_BUSADDR_CMDTYPE; +} + +static void set_ioaccel2_performant_mode(struct ctlr_info *h, + struct CommandList *c) +{ + struct io_accel2_cmd *cp = &h->ioaccel2_cmd_pool[c->cmdindex]; + + /* Tell the controller to post the reply to the queue for this + * processor. This seems to give the best I/O throughput. + */ + cp->reply_queue = smp_processor_id() % h->nreply_queues; + /* Set the bits in the address sent down to include: + * - performant mode bit not used in ioaccel mode 2 + * - pull count (bits 0-3) + * - command type isn't needed for ioaccel2 + */ + c->busaddr |= (h->ioaccel2_blockFetchTable[cp->sg_count]); +} + static int is_firmware_flash_cmd(u8 *cdb) { return cdb[0] == BMIC_WRITE && cdb[6] == BMIC_FLASH_FIRMWARE; @@ -670,7 +734,16 @@ static void enqueue_cmd_and_start_io(struct ctlr_info *h, { unsigned long flags; - set_performant_mode(h, c); + switch (c->cmd_type) { + case CMD_IOACCEL1: + set_ioaccel1_performant_mode(h, c); + break; + case CMD_IOACCEL2: + set_ioaccel2_performant_mode(h, c); + break; + default: + set_performant_mode(h, c); + } dial_down_lockup_detection_during_fw_flash(h, c); spin_lock_irqsave(&h->lock, flags); addQ(&h->reqQ, c); @@ -1228,6 +1301,123 @@ static void hpsa_unmap_sg_chain_block(struct ctlr_info *h, pci_unmap_single(h->pdev, temp64.val, chain_sg->Len, PCI_DMA_TODEVICE); } +static void handle_ioaccel_mode2_error(struct ctlr_info *h, + struct CommandList *c, + struct scsi_cmnd *cmd, + struct io_accel2_cmd *c2) +{ + int data_len; + + switch (c2->error_data.serv_response) { + case IOACCEL2_SERV_RESPONSE_COMPLETE: + switch (c2->error_data.status) { + case IOACCEL2_STATUS_SR_TASK_COMP_GOOD: + break; + case IOACCEL2_STATUS_SR_TASK_COMP_CHK_COND: + dev_warn(&h->pdev->dev, + "%s: task complete with check condition.\n", + "HP SSD Smart Path"); + if (c2->error_data.data_present != + IOACCEL2_SENSE_DATA_PRESENT) + break; + /* copy the sense data */ + data_len = c2->error_data.sense_data_len; + if (data_len > SCSI_SENSE_BUFFERSIZE) + data_len = SCSI_SENSE_BUFFERSIZE; + if (data_len > sizeof(c2->error_data.sense_data_buff)) + data_len = + sizeof(c2->error_data.sense_data_buff); + memcpy(cmd->sense_buffer, + c2->error_data.sense_data_buff, data_len); + cmd->result |= SAM_STAT_CHECK_CONDITION; + break; + case IOACCEL2_STATUS_SR_TASK_COMP_BUSY: + dev_warn(&h->pdev->dev, + "%s: task complete with BUSY status.\n", + "HP SSD Smart Path"); + break; + case IOACCEL2_STATUS_SR_TASK_COMP_RES_CON: + dev_warn(&h->pdev->dev, + "%s: task complete with reservation conflict.\n", + "HP SSD Smart Path"); + break; + case IOACCEL2_STATUS_SR_TASK_COMP_SET_FULL: + /* Make scsi midlayer do unlimited retries */ + cmd->result = DID_IMM_RETRY << 16; + break; + case IOACCEL2_STATUS_SR_TASK_COMP_ABORTED: + dev_warn(&h->pdev->dev, + "%s: task complete with aborted status.\n", + "HP SSD Smart Path"); + break; + default: + dev_warn(&h->pdev->dev, + "%s: task complete with unrecognized status: 0x%02x\n", + "HP SSD Smart Path", c2->error_data.status); + break; + } + break; + case IOACCEL2_SERV_RESPONSE_FAILURE: + /* don't expect to get here. */ + dev_warn(&h->pdev->dev, + "unexpected delivery or target failure, status = 0x%02x\n", + c2->error_data.status); + break; + case IOACCEL2_SERV_RESPONSE_TMF_COMPLETE: + break; + case IOACCEL2_SERV_RESPONSE_TMF_SUCCESS: + break; + case IOACCEL2_SERV_RESPONSE_TMF_REJECTED: + dev_warn(&h->pdev->dev, "task management function rejected.\n"); + break; + case IOACCEL2_SERV_RESPONSE_TMF_WRONG_LUN: + dev_warn(&h->pdev->dev, "task management function invalid LUN\n"); + break; + default: + dev_warn(&h->pdev->dev, + "%s: Unrecognized server response: 0x%02x\n", + "HP SSD Smart Path", c2->error_data.serv_response); + break; + } +} + +static void process_ioaccel2_completion(struct ctlr_info *h, + struct CommandList *c, struct scsi_cmnd *cmd, + struct hpsa_scsi_dev_t *dev) +{ + struct io_accel2_cmd *c2 = &h->ioaccel2_cmd_pool[c->cmdindex]; + + /* check for good status */ + if (likely(c2->error_data.serv_response == 0 && + c2->error_data.status == 0)) { + cmd_free(h, c); + cmd->scsi_done(cmd); + return; + } + + /* Any RAID offload error results in retry which will use + * the normal I/O path so the controller can handle whatever's + * wrong. + */ + if (is_logical_dev_addr_mode(dev->scsi3addr) && + c2->error_data.serv_response == + IOACCEL2_SERV_RESPONSE_FAILURE) { + if (c2->error_data.status != + IOACCEL2_STATUS_SR_IOACCEL_DISABLED) + dev_warn(&h->pdev->dev, + "%s: Error 0x%02x, Retrying on standard path.\n", + "HP SSD Smart Path", c2->error_data.status); + dev->offload_enabled = 0; + cmd->result = DID_SOFT_ERROR << 16; + cmd_free(h, c); + cmd->scsi_done(cmd); + return; + } + handle_ioaccel_mode2_error(h, c, cmd, c2); + cmd_free(h, c); + cmd->scsi_done(cmd); +} + static void complete_scsi_command(struct CommandList *cp) { struct scsi_cmnd *cmd; @@ -1252,6 +1442,10 @@ static void complete_scsi_command(struct CommandList *cp) cmd->result = (DID_OK << 16); /* host byte */ cmd->result |= (COMMAND_COMPLETE << 8); /* msg byte */ + + if (cp->cmd_type == CMD_IOACCEL2) + return process_ioaccel2_completion(h, cp, cmd, dev); + cmd->result |= ei->ScsiStatus; /* copy the sense data whether we need to or not. */ @@ -2463,10 +2657,7 @@ static int fixup_ioaccel_cdb(u8 *cdb, int *cdb_len) return 0; } -/* - * Queue a command to the I/O accelerator path. - */ -static int hpsa_scsi_ioaccel_queue_command(struct ctlr_info *h, +static int hpsa_scsi_ioaccel1_queue_command(struct ctlr_info *h, struct CommandList *c, u32 ioaccel_handle, u8 *cdb, int cdb_len, u8 *scsi3addr) { @@ -2538,6 +2729,7 @@ static int hpsa_scsi_ioaccel_queue_command(struct ctlr_info *h, control |= IOACCEL1_CONTROL_NODATAXFER; } + c->Header.SGList = use_sg; /* Fill out the command structure to submit */ cp->dev_handle = ioaccel_handle & 0xFFFF; cp->transfer_len = total_len; @@ -2546,19 +2738,7 @@ static int hpsa_scsi_ioaccel_queue_command(struct ctlr_info *h, cp->control = control; memcpy(cp->CDB, cdb, cdb_len); memcpy(cp->CISS_LUN, scsi3addr, 8); - - /* Tell the controller to post the reply to the queue for this - * processor. This seems to give the best I/O throughput. - */ - cp->ReplyQueue = smp_processor_id() % h->nreply_queues; - - /* Set the bits in the address sent down to include: - * - performant mode bit (bit 0) - * - pull count (bits 1-3) - * - command type (bits 4-6) - */ - c->busaddr |= 1 | (h->ioaccel1_blockFetchTable[use_sg] << 1) | - IOACCEL1_BUSADDR_CMDTYPE; + /* Tag was already set at init time. */ enqueue_cmd_and_start_io(h, c); return 0; } @@ -2577,6 +2757,106 @@ static int hpsa_scsi_ioaccel_direct_map(struct ctlr_info *h, cmd->cmnd, cmd->cmd_len, dev->scsi3addr); } +static int hpsa_scsi_ioaccel2_queue_command(struct ctlr_info *h, + struct CommandList *c, u32 ioaccel_handle, u8 *cdb, int cdb_len, + u8 *scsi3addr) +{ + struct scsi_cmnd *cmd = c->scsi_cmd; + struct io_accel2_cmd *cp = &h->ioaccel2_cmd_pool[c->cmdindex]; + struct ioaccel2_sg_element *curr_sg; + int use_sg, i; + struct scatterlist *sg; + u64 addr64; + u32 len; + u32 total_len = 0; + + if (scsi_sg_count(cmd) > h->ioaccel_maxsg) + return IO_ACCEL_INELIGIBLE; + + if (fixup_ioaccel_cdb(cdb, &cdb_len)) + return IO_ACCEL_INELIGIBLE; + c->cmd_type = CMD_IOACCEL2; + /* Adjust the DMA address to point to the accelerated command buffer */ + c->busaddr = (u32) h->ioaccel2_cmd_pool_dhandle + + (c->cmdindex * sizeof(*cp)); + BUG_ON(c->busaddr & 0x0000007F); + + memset(cp, 0, sizeof(*cp)); + cp->IU_type = IOACCEL2_IU_TYPE; + + use_sg = scsi_dma_map(cmd); + if (use_sg < 0) + return use_sg; + + if (use_sg) { + BUG_ON(use_sg > IOACCEL2_MAXSGENTRIES); + curr_sg = cp->sg; + scsi_for_each_sg(cmd, sg, use_sg, i) { + addr64 = (u64) sg_dma_address(sg); + len = sg_dma_len(sg); + total_len += len; + curr_sg->address = cpu_to_le64(addr64); + curr_sg->length = cpu_to_le32(len); + curr_sg->reserved[0] = 0; + curr_sg->reserved[1] = 0; + curr_sg->reserved[2] = 0; + curr_sg->chain_indicator = 0; + curr_sg++; + } + + switch (cmd->sc_data_direction) { + case DMA_TO_DEVICE: + cp->direction = IOACCEL2_DIR_DATA_OUT; + break; + case DMA_FROM_DEVICE: + cp->direction = IOACCEL2_DIR_DATA_IN; + break; + case DMA_NONE: + cp->direction = IOACCEL2_DIR_NO_DATA; + break; + default: + dev_err(&h->pdev->dev, "unknown data direction: %d\n", + cmd->sc_data_direction); + BUG(); + break; + } + } else { + cp->direction = IOACCEL2_DIR_NO_DATA; + } + cp->scsi_nexus = ioaccel_handle; + cp->Tag.lower = (c->cmdindex << DIRECT_LOOKUP_SHIFT) | + DIRECT_LOOKUP_BIT; + memcpy(cp->cdb, cdb, sizeof(cp->cdb)); + memset(cp->cciss_lun, 0, sizeof(cp->cciss_lun)); + cp->cmd_priority_task_attr = 0; + + /* fill in sg elements */ + cp->sg_count = (u8) use_sg; + + cp->data_len = cpu_to_le32(total_len); + cp->err_ptr = cpu_to_le64(c->busaddr + + offsetof(struct io_accel2_cmd, error_data)); + cp->err_len = cpu_to_le32((u32) sizeof(cp->error_data)); + + enqueue_cmd_and_start_io(h, c); + return 0; +} + +/* + * Queue a command to the correct I/O accelerator path. + */ +static int hpsa_scsi_ioaccel_queue_command(struct ctlr_info *h, + struct CommandList *c, u32 ioaccel_handle, u8 *cdb, int cdb_len, + u8 *scsi3addr) +{ + if (h->transMethod & CFGTBL_Trans_io_accel1) + return hpsa_scsi_ioaccel1_queue_command(h, c, ioaccel_handle, + cdb, cdb_len, scsi3addr); + else + return hpsa_scsi_ioaccel2_queue_command(h, c, ioaccel_handle, + cdb, cdb_len, scsi3addr); +} + /* * Attempt to perform offload RAID mapping for a logical volume I/O. */ @@ -4251,7 +4531,8 @@ static inline void finish_cmd(struct CommandList *c) spin_unlock_irqrestore(&h->lock, flags); dial_up_lockup_detection_on_fw_flash_complete(c->h, c); - if (likely(c->cmd_type == CMD_IOACCEL1 || c->cmd_type == CMD_SCSI)) + if (likely(c->cmd_type == CMD_IOACCEL1 || c->cmd_type == CMD_SCSI + || c->cmd_type == CMD_IOACCEL2)) complete_scsi_command(c); else if (c->cmd_type == CMD_IOCTL_PEND) complete(c->waiting); @@ -5974,6 +6255,12 @@ static void hpsa_enter_performant_mode(struct ctlr_info *h, u32 trans_support) access = SA5_ioaccel_mode1_access; writel(10, &h->cfgtable->HostWrite.CoalIntDelay); writel(4, &h->cfgtable->HostWrite.CoalIntCount); + } else { + if (trans_support & CFGTBL_Trans_io_accel2) { + access = SA5_ioaccel_mode2_access; + writel(10, &h->cfgtable->HostWrite.CoalIntDelay); + writel(4, &h->cfgtable->HostWrite.CoalIntCount); + } } writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL); hpsa_wait_for_mode_change_ack(h); diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h index 0e14e9bf735a..45bb1ea6835e 100644 --- a/drivers/scsi/hpsa.h +++ b/drivers/scsi/hpsa.h @@ -282,6 +282,18 @@ static void SA5_submit_command(struct ctlr_info *h, (void) readl(h->vaddr + SA5_SCRATCHPAD_OFFSET); } +static void SA5_submit_command_ioaccel2(struct ctlr_info *h, + struct CommandList *c) +{ + dev_dbg(&h->pdev->dev, "Sending %x, tag = %x\n", c->busaddr, + c->Header.Tag.lower); + if (c->cmd_type == CMD_IOACCEL2) + writel(c->busaddr, h->vaddr + IOACCEL2_INBOUND_POSTQ_32); + else + writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET); + (void) readl(h->vaddr + SA5_SCRATCHPAD_OFFSET); +} + /* * This card is the opposite of the other cards. * 0 turns interrupts on... @@ -475,6 +487,14 @@ static struct access_method SA5_ioaccel_mode1_access = { SA5_ioaccel_mode1_completed, }; +static struct access_method SA5_ioaccel_mode2_access = { + SA5_submit_command_ioaccel2, + SA5_performant_intr_mask, + SA5_fifo_full, + SA5_performant_intr_pending, + SA5_performant_completed, +}; + static struct access_method SA5_performant_access = { SA5_submit_command, SA5_performant_intr_mask, diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h index dfdb4a5c3646..f6430b428fb0 100644 --- a/drivers/scsi/hpsa_cmd.h +++ b/drivers/scsi/hpsa_cmd.h @@ -478,6 +478,7 @@ struct io_accel2_scsi_response { #define IOACCEL2_STATUS_SR_TASK_COMP_RES_CON 0x18 #define IOACCEL2_STATUS_SR_TASK_COMP_SET_FULL 0x28 #define IOACCEL2_STATUS_SR_TASK_COMP_ABORTED 0x40 +#define IOACCEL2_STATUS_SR_IOACCEL_DISABLED 0x0E u8 data_present; /* low 2 bits */ #define IOACCEL2_NO_DATAPRESENT 0x000 #define IOACCEL2_RESPONSE_DATAPRESENT 0x001 -- 2.34.1