From c9c55d9211150b589d2d39a45cf5f96c70a51a47 Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Fri, 26 Oct 2012 14:26:04 -0500 Subject: [PATCH] gpio/omap: fix off-mode bug: clear debounce settings on free/reset This change was originally titled "gpio/omap: fix off-mode bug: clear debounce clock enable mask on free/reset". The title has been updated slightly to reflect (what should be) the final fix. When a GPIO is freed or shutdown, we need to ensure that any debounce settings are cleared and if the GPIO is the only GPIO in the bank that is currently using debounce, then disable the debounce clock as well to save power. Currently, the debounce settings are not cleared on a GPIO free or shutdown and so during a context restore on subsequent off-mode transition, the previous debounce values are restored from the shadow copies (bank->context.debounce*) leading to mismatch state between driver state and hardware state. This was discovered when board code was doing gpio_request_one() gpio_set_debounce() gpio_free() which was leaving the GPIO debounce settings in a confused state. If that GPIO bank is subsequently used with off-mode enabled, bogus state would be restored, leaving GPIO debounce enabled which then prevented the CORE powerdomain from transitioning. To fix this, introduce a new function called _clear_gpio_debounce() to clear any debounce settings when the GPIO is freed or shutdown. If this GPIO is the last debounce-enabled GPIO in the bank, the debounce will also be cut. Please note that we cannot use _gpio_dbck_disable() to disable the debounce clock because this has been specifically created for the gpio suspend path and is intended to shutdown the debounce clock while debounce is enabled. Special thanks to Kevin Hilman for root causing the bug. This fix is a collaborative effort with inputs from Kevin Hilman, Grazvydas Ignotas and Santosh Shilimkar. Testing: - This has been unit tested on an OMAP3430 Beagle board, by requesting a gpio, enabling debounce and then freeing the gpio and checking the register contents, the saved register context and the debounce clock state. - Kevin Hilman tested on 37xx/EVM board which configures GPIO debounce for the ads7846 touchscreen in its board file using the above sequence, and so was failing off-mode tests in dynamic idle. Verified that off-mode tests are passing with this patch. V5 changes: - Corrected author Reported-by: Paul Walmsley Cc: Igor Grinberg Cc: Grazvydas Ignotas Cc: Jon Hunter Signed-off-by: Jon Hunter Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman Acked-by: Santosh Shilimkar Signed-off-by: Linus Walleij --- drivers/gpio/gpio-omap.c | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index 94cbc842fbc3..d335af1d4d85 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -251,6 +251,40 @@ static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio, } } +/** + * _clear_gpio_debounce - clear debounce settings for a gpio + * @bank: the gpio bank we're acting upon + * @gpio: the gpio number on this @gpio + * + * If a gpio is using debounce, then clear the debounce enable bit and if + * this is the only gpio in this bank using debounce, then clear the debounce + * time too. The debounce clock will also be disabled when calling this function + * if this is the only gpio in the bank using debounce. + */ +static void _clear_gpio_debounce(struct gpio_bank *bank, unsigned gpio) +{ + u32 gpio_bit = GPIO_BIT(bank, gpio); + + if (!bank->dbck_flag) + return; + + if (!(bank->dbck_enable_mask & gpio_bit)) + return; + + bank->dbck_enable_mask &= ~gpio_bit; + bank->context.debounce_en &= ~gpio_bit; + __raw_writel(bank->context.debounce_en, + bank->base + bank->regs->debounce_en); + + if (!bank->dbck_enable_mask) { + bank->context.debounce = 0; + __raw_writel(bank->context.debounce, bank->base + + bank->regs->debounce); + clk_disable(bank->dbck); + bank->dbck_enabled = false; + } +} + static inline void set_gpio_trigger(struct gpio_bank *bank, int gpio, unsigned trigger) { @@ -539,6 +573,7 @@ static void _reset_gpio(struct gpio_bank *bank, int gpio) _set_gpio_irqenable(bank, gpio, 0); _clear_gpio_irqstatus(bank, gpio); _set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), IRQ_TYPE_NONE); + _clear_gpio_debounce(bank, gpio); } /* Use disable_irq_wake() and enable_irq_wake() functions from drivers */ -- 2.34.1