From ca78c26c0b58fe1f1da7cdb3a5a18971b3897c5d Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 1 Mar 2014 20:26:28 +0100 Subject: [PATCH] ARM: sun4i: dt: Add USB host nodes to hackberry dts Add nodes for the usb-phy and ehci- and ohci-usb-host controllers. Based on fex file settings, the fex file also contains a mysterious line: usb_hub_vcc_en_gpio = port:PB09<1><0><0> Which also clashes with usbc0, which has: usb_drv_vbus_gpio = port:PB09<1><0><0> So if usb does not work properly we need someone with a hackberry to look closer into this. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10-hackberry.dts | 40 +++++++++++++++++++++++ 1 file changed, 40 insertions(+) diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts index 6692d336335d..d7c17e46ce23 100644 --- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts +++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts @@ -13,6 +13,7 @@ /dts-v1/; /include/ "sun4i-a10.dtsi" +/include/ "sunxi-common-regulators.dtsi" / { model = "Miniand Hackberry"; @@ -35,6 +36,28 @@ }; }; + usbphy: phy@01c13400 { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; + }; + + ehci0: usb@01c14000 { + status = "okay"; + }; + + ohci0: usb@01c14400 { + status = "okay"; + }; + + ehci1: usb@01c1c000 { + status = "okay"; + }; + + ohci1: usb@01c1c400 { + status = "okay"; + }; + pio: pinctrl@01c20800 { pinctrl-names = "default"; pinctrl-0 = <&hackberry_hogs>; @@ -45,6 +68,13 @@ allwinner,drive = <0>; allwinner,pull = <0>; }; + + usb2_vbus_pin_hackberry: usb2_vbus_pin@0 { + allwinner,pins = "PH12"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; }; uart0: serial@01c28000 { @@ -62,4 +92,14 @@ enable-active-high; gpio = <&pio 7 19 0>; }; + + reg_usb1_vbus: usb1-vbus { + status = "okay"; + }; + + reg_usb2_vbus: usb2-vbus { + pinctrl-0 = <&usb2_vbus_pin_hackberry>; + gpio = <&pio 7 12 0>; + status = "okay"; + }; }; -- 2.34.1