From cc60fad010d2970625987b2efa06c210eed0c380 Mon Sep 17 00:00:00 2001 From: Zoltan Herpai Date: Sun, 21 Sep 2014 15:42:36 +0000 Subject: [PATCH] sunxi: remove 3.13 support Signed-off-by: Zoltan HERPAI SVN-Revision: 42628 --- target/linux/sunxi/config-3.13 | 430 ------ .../100-clk-composite-determine-rate.patch | 70 - .../101-fix-off-by-one-masks.patch | 29 - .../102-clk-factors-clear-vars.patch | 27 - .../103-sunxi-clk-core-clock-protect.patch | 66 - .../104-clk-sunxi-fix-memory-leak.patch | 63 - .../105-reset-add-reset-ctrler.patch | 206 --- .../106-add-Kconfig-for-reset.patch | 23 - .../107-sunxi-register-a31-reset.patch | 45 - .../108-sun6i-add-smp-support.patch | 206 --- .../109-dt-sun6i-add-reset-ctrler.patch | 90 -- .../110-sun4i-clkevent-fill-irqfield.patch | 28 - .../111-sun4i-clksrc-change-cpu-mask.patch | 25 - ...-clksrc-increase-a-bit-in-clockevent.patch | 41 - ...13-clk-sunxi-register-factors-clocks.patch | 223 ---- .../114-clk-sunxi-clean-magic-number.patch | 35 - .../115-clk-sunxi_add-gating-pll1.patch | 46 - .../patches-3.13/116-clk-sunxi-add-pll4.patch | 84 -- ...7-clk-sunxi-factors_clk_setup_update.patch | 74 - .../118-clk-sunxi-add-pll5-pll6.patch | 303 ----- .../119-dt-sunxi-add-pll5-pll6.patch | 187 --- .../patches-3.13/120-clk-sunxi-mod0.patch | 122 -- ...121-clk-sunxi-better-factor-dt-nodes.patch | 47 - .../122-1-dt-sun4i-add-mod0.patch | 145 -- .../122-2-dt-sun5i-add-mod0.patch | 213 --- .../122-3-dt-sun7i-add-mod0.patch | 146 -- .../123-clk-sunxi-automatic-reparenting.patch | 68 - ...sun6i-add-nodes-for-additional-cores.patch | 31 - ...-dt-sun7i-add-external-clock-outputs.patch | 58 - ...7-1-dt-sun4i-rename-clock-node-names.patch | 139 -- ...7-2-dt-sun5i-rename-clock-node-names.patch | 261 ---- ...7-3-dt-sun6i-rename-clock-node-names.patch | 112 -- ...7-4-dt-sun7i-rename-clock-node-names.patch | 132 -- .../128-dt-sunxi-add-mbusclk.patch | 70 - .../130-1-dt-sunxi-add-emac-aliases.patch | 60 - .../130-2-dt-sun7i-update-eth-aliases.patch | 25 - .../131-dt-sun7i-add-arch-timers.patch | 38 - ...132-dt-sun5i-a13-add-olinuxino-micro.patch | 108 -- .../patches-3.13/140-sun47i-rtc-driver.patch | 570 -------- .../patches-3.13/141-dt-sun47i-add-rtc.patch | 44 - .../patches-3.13/145-clksrc-add-hstimer.patch | 282 ---- .../146-1-dt-sun5i-a10s-add-hstimer.patch | 33 - .../146-2-dt-sun5i-a13-add-hstimer.patch | 33 - .../146-3-dt-sun7i-a20-add-hstimer.patch | 43 - .../146-4-dt-sun6i-a31-add-hstimer.patch | 37 - .../150-1-dt-sun7i-add-gmac-clock-node.patch | 56 - .../150-2-dt-sun7i-add-gmac-ctrler-node.patch | 39 - .../150-3-dt-sun7i-gmac-add-pinmuxing.patch | 53 - .../patches-3.13/151-0-stmmac-fixup-0.patch | 50 - .../patches-3.13/151-1-stmmac-fixup-1.patch | 77 -- .../patches-3.13/151-2-stmmac-fixup-2.patch | 31 - .../patches-3.13/151-3-stmmac-fixup-3.patch | 223 ---- .../patches-3.13/151-4-stmmac-fixup-4.patch | 214 --- .../patches-3.13/151-5-stmmac-fixup-5.patch | 45 - .../patches-3.13/151-6-stmmac-fixup-6.patch | 57 - .../patches-3.13/151-7-stmmac-fixup-7.patch | 146 -- .../patches-3.13/151-8-stmmac-fixup-8.patch | 50 - .../patches-3.13/151-9-stmmac-fixup-9.patch | 73 - ...52-1-dt-sun7i-enable-gmac-cubietruck.patch | 38 - ...2-2-dt-sun7i-enable-gmac-cubieboard2.patch | 61 - ...152-3-dt-sun7i-enable-gmac-a20-micro.patch | 62 - ...tmmac-enable-main-clock-when-probing.patch | 96 -- ...d-support-for-optional-reset-control.patch | 158 --- ...ass-board-specific-data-to-callbacks.patch | 124 -- ...or-dt-parameter-to-dma-store-and-fwd.patch | 31 - ...153-5-stmmac-deprecate-snps-phy-addr.patch | 55 - ...drvdata-callback-with-compat-strings.patch | 123 -- ...53-7-stmmac-sunxi-extensions-for-a20.patch | 273 ---- ...hy_get_leave-error-logging-to-caller.patch | 45 - ...60-2-phy-core-dont-porpagate-ENOSUPP.patch | 40 - .../160-3-phy-core-no-module-build.patch | 48 - ...-libahci-allow-override-start_engine.patch | 222 --- ...platform-devs-with-more-than-1-clock.patch | 255 ---- ...-platform-support-optional-regulator.patch | 141 -- ...7-ahci-platform-add-resource-helpers.patch | 211 --- ...60-8-ahci-plat-libraryise-ahci_probe.patch | 344 ----- ...-ahci-plat-libraryise-suspend-resume.patch | 188 --- .../161-ahci-add-sunxi-to-ahci_platform.patch | 352 ----- .../162-1-ahci-plat-add-dt-compat.patch | 31 - .../162-2-ahci-plat-manage-sata-phy.patch | 142 -- .../162-3-ahci-plat-runtime-resume.patch | 85 -- .../163-ahci_sunxi-use-mdelay.patch | 47 - .../164-1-dt-sun4i-add-ahci.patch | 122 -- .../164-2-dt-sun7i-add-ahci.patch | 128 -- .../patches-3.13/170-1-mmc-add-driver.patch | 1187 ----------------- .../170-2-mmc-simplify-clkdelay.patch | 56 - ...0-3-mmc-dont-set-mmc_clk-in-lowpower.patch | 49 - .../170-4-mmc-stop-claiming-UHS.patch | 32 - .../170-5-mmc-fix-caps-override.patch | 34 - ...-dont-call-mmc_of_parser-until-ready.patch | 45 - .../170-7-clk-export-mmc-phasectrl.patch | 42 - ...-8-clk-sunxi-implement-mmc-phasectrl.patch | 62 - .../170-9-mmc-fixup-revert-sdio.patch | 44 - ...inctrl-sunxi-fix-port-F-multiplexing.patch | 56 - ...nctrl-sunxi-fix-masking-with-irqtype.patch | 26 - ...l-sunxi-fix-irqregister-offset-calcs.patch | 46 - .../patches-3.13/173-1-dt-sun4i-add-mmc.patch | 133 -- .../patches-3.13/173-2-dt-sun5i-add-mmc.patch | 234 ---- .../patches-3.13/173-3-dt-sun7i-add-mmc.patch | 179 --- .../173-5-dt-sun5i-fixup-mmc.patch | 107 -- .../173-6-dt-sun7i-fixup-mmc.patch | 73 - .../patches-3.13/175-lradc-add-driver.patch | 339 ----- .../176-1-dt-sun7i-add-lradc.patch | 59 - .../176-2-dt-sun4i-add-lradc.patch | 31 - .../176-3-dt-sun5i-add-lradc.patch | 104 -- ...-0-usb-backport-device_wakeup_enable.patch | 896 ------------- ...1-usb-ohci-platform-dt-instantiation.patch | 322 ----- ...ehci-platform-support-clk-phy-via-dt.patch | 392 ------ ...-usb-ohci-platform-support-bigendian.patch | 80 -- ...-usb-ehci-platform-support-bigendian.patch | 77 -- .../180-5-usb-ohci-change-compat-string.patch | 69 - .../180-6-usb-ehci-change-compat-string.patch | 83 -- .../180-7-usb-uhci-change-compat-string.patch | 83 -- .../180-8-usb-xhci-change-compat-string.patch | 56 - ...0-9-clk-sunxi-add-usb-clockreg-reset.patch | 127 -- ...80-a-clk-sunxi-add-usb-clockreg-defs.patch | 50 - .../181-1-dt-sun4i-add-vbus-reg-dtsi.patch | 79 -- .../181-2-dt-sun5i-add-vbus-reg-dtsi.patch | 95 -- .../182-usb-add-ehci-driver.patch | 420 ------ .../183-1-dt-sun4i-add-usbclock-nodes.patch | 34 - .../183-2-dt-sun4i-add-usb-bindings.patch | 86 -- .../183-3-dt-sun4i-add-ehci-cubieboard.patch | 62 - .../183-4-dt-sun4i-add-ehci-a1000.patch | 61 - .../184-1-dt-sun7i-add-usbclock-nodes.patch | 34 - .../184-2-dt-sun7i-add-usb-bindings.patch | 86 -- .../184-3-dt-sun7i-add-ehci-cubieboard2.patch | 62 - ...t-sun7i-add-ehci-olinuxino-a20-micro.patch | 61 - .../184-5-dt-sun7i-add-ehci-cubietruck.patch | 39 - .../185-1-dt-sun5i-add-usbclock-nodes.patch | 55 - .../185-2-dt-sun5i-add-usb-bindings.patch | 103 -- .../185-3-dt-sun5i-add-ehci-a13.patch | 72 - .../patches-3.13/190-sunxi-select-PSCI.patch | 22 - ...i-timer-add-support-for-reset-ctrler.patch | 62 - .../201-reset-add-of_reset_control_get.patch | 112 -- .../202-reset-rename-compat-prop.patch | 40 - .../210-clk-sunxi-add-a20-output-clk.patch | 112 -- ...rl-sunxi-add-a20-output-clkpin-funcs.patch | 32 - ...dt-sun7i-add-pinmuxing-for-extclocks.patch | 38 - .../220-dt-sun4i-move-aliases-to-dtsi.patch | 62 - ...-dt-sunxi-change-emac-to-new-compats.patch | 57 - ...231-dt-sunxi-net-phy-add-new-compats.patch | 57 - ...2-dt-sunxi-change-to-new-net-compats.patch | 85 -- ...-dt-sun4i-add-missing-serial-aliases.patch | 33 - ...un5i-a10s-add-missing-serial-aliases.patch | 31 - ...sun5i-a13-add-missing-serial-aliases.patch | 32 - ...-dt-sun6i-add-missing-serial-aliases.patch | 37 - ...241-dt-sun7i-add-pinmuxing-for-uart2.patch | 35 - ...50-clk-sunxi-get-divs-parent-clkname.patch | 45 - ...k-sunxi-add-clk-output-names-dt-prop.patch | 55 - ...d-names-for-pll5-6-into-factors_data.patch | 83 -- .../253-clk-sunxi-add-a20a31-gmac-clock.patch | 177 --- ...254-dt-sun7i-change-32k-osc-nodename.patch | 36 - .../255-clk-sunxi-add-a31-pll6.patch | 111 -- .../260-spi-add-a31-spi-driver.patch | 599 --------- .../261-dt-sun6i-add-pll6-and-spi.patch | 82 -- .../262-spi-add-a10-spi-driver.patch | 571 -------- .../263-1-dt-sun7i-add-a20-spi.patch | 85 -- .../263-2-dt-sun4i-add-a10-spi.patch | 84 -- .../263-3-dt-sun5i-a10s-add-a10-spi.patch | 67 - .../263-4-dt-sun5i-a13-add-a10-spi.patch | 67 - .../263-5-dt-sun7i-add-spi-muxing.patch | 38 - ...64-5-dt-sun7i-enable-spi-on-a20micro.patch | 46 - ...270-1-wdt-sunxi-introduce-new-compat.patch | 53 - ...add-new-wdt-compats-into-reboot-code.patch | 31 - ...0-3-dt-sunxi-watchdog-update-compats.patch | 86 -- .../280-input-add-sun4i-ts-driver.patch | 354 ----- .../301-1-dt-sun4i-add-pcduino.patch | 86 -- .../301-2-dt-sun4i-pcduino-add-mmc.patch | 73 - .../301-3-dt-sun4i-pcduino-add-usb.patch | 58 - .../patches-3.13/302-dt-sun4i-add-lime.patch | 150 --- .../patches-3.13/303-dt-add-pcduinov3.patch | 13 - .../patches-3.13/304-dt-add-bananapi.patch | 11 - 172 files changed, 20084 deletions(-) delete mode 100644 target/linux/sunxi/config-3.13 delete mode 100644 target/linux/sunxi/patches-3.13/100-clk-composite-determine-rate.patch delete mode 100644 target/linux/sunxi/patches-3.13/101-fix-off-by-one-masks.patch delete mode 100644 target/linux/sunxi/patches-3.13/102-clk-factors-clear-vars.patch delete mode 100644 target/linux/sunxi/patches-3.13/103-sunxi-clk-core-clock-protect.patch delete mode 100644 target/linux/sunxi/patches-3.13/104-clk-sunxi-fix-memory-leak.patch delete mode 100644 target/linux/sunxi/patches-3.13/105-reset-add-reset-ctrler.patch delete mode 100644 target/linux/sunxi/patches-3.13/106-add-Kconfig-for-reset.patch delete mode 100644 target/linux/sunxi/patches-3.13/107-sunxi-register-a31-reset.patch delete mode 100644 target/linux/sunxi/patches-3.13/108-sun6i-add-smp-support.patch delete mode 100644 target/linux/sunxi/patches-3.13/109-dt-sun6i-add-reset-ctrler.patch delete mode 100644 target/linux/sunxi/patches-3.13/110-sun4i-clkevent-fill-irqfield.patch delete mode 100644 target/linux/sunxi/patches-3.13/111-sun4i-clksrc-change-cpu-mask.patch delete mode 100644 target/linux/sunxi/patches-3.13/112-sun4i-clksrc-increase-a-bit-in-clockevent.patch delete mode 100644 target/linux/sunxi/patches-3.13/113-clk-sunxi-register-factors-clocks.patch delete mode 100644 target/linux/sunxi/patches-3.13/114-clk-sunxi-clean-magic-number.patch delete mode 100644 target/linux/sunxi/patches-3.13/115-clk-sunxi_add-gating-pll1.patch delete mode 100644 target/linux/sunxi/patches-3.13/116-clk-sunxi-add-pll4.patch delete mode 100644 target/linux/sunxi/patches-3.13/117-clk-sunxi-factors_clk_setup_update.patch delete mode 100644 target/linux/sunxi/patches-3.13/118-clk-sunxi-add-pll5-pll6.patch delete mode 100644 target/linux/sunxi/patches-3.13/119-dt-sunxi-add-pll5-pll6.patch delete mode 100644 target/linux/sunxi/patches-3.13/120-clk-sunxi-mod0.patch delete mode 100644 target/linux/sunxi/patches-3.13/121-clk-sunxi-better-factor-dt-nodes.patch delete mode 100644 target/linux/sunxi/patches-3.13/122-1-dt-sun4i-add-mod0.patch delete mode 100644 target/linux/sunxi/patches-3.13/122-2-dt-sun5i-add-mod0.patch delete mode 100644 target/linux/sunxi/patches-3.13/122-3-dt-sun7i-add-mod0.patch delete mode 100644 target/linux/sunxi/patches-3.13/123-clk-sunxi-automatic-reparenting.patch delete mode 100644 target/linux/sunxi/patches-3.13/125-dt-sun6i-add-nodes-for-additional-cores.patch delete mode 100644 target/linux/sunxi/patches-3.13/126-dt-sun7i-add-external-clock-outputs.patch delete mode 100644 target/linux/sunxi/patches-3.13/127-1-dt-sun4i-rename-clock-node-names.patch delete mode 100644 target/linux/sunxi/patches-3.13/127-2-dt-sun5i-rename-clock-node-names.patch delete mode 100644 target/linux/sunxi/patches-3.13/127-3-dt-sun6i-rename-clock-node-names.patch delete mode 100644 target/linux/sunxi/patches-3.13/127-4-dt-sun7i-rename-clock-node-names.patch delete mode 100644 target/linux/sunxi/patches-3.13/128-dt-sunxi-add-mbusclk.patch delete mode 100644 target/linux/sunxi/patches-3.13/130-1-dt-sunxi-add-emac-aliases.patch delete mode 100644 target/linux/sunxi/patches-3.13/130-2-dt-sun7i-update-eth-aliases.patch delete mode 100644 target/linux/sunxi/patches-3.13/131-dt-sun7i-add-arch-timers.patch delete mode 100644 target/linux/sunxi/patches-3.13/132-dt-sun5i-a13-add-olinuxino-micro.patch delete mode 100644 target/linux/sunxi/patches-3.13/140-sun47i-rtc-driver.patch delete mode 100644 target/linux/sunxi/patches-3.13/141-dt-sun47i-add-rtc.patch delete mode 100644 target/linux/sunxi/patches-3.13/145-clksrc-add-hstimer.patch delete mode 100644 target/linux/sunxi/patches-3.13/146-1-dt-sun5i-a10s-add-hstimer.patch delete mode 100644 target/linux/sunxi/patches-3.13/146-2-dt-sun5i-a13-add-hstimer.patch delete mode 100644 target/linux/sunxi/patches-3.13/146-3-dt-sun7i-a20-add-hstimer.patch delete mode 100644 target/linux/sunxi/patches-3.13/146-4-dt-sun6i-a31-add-hstimer.patch delete mode 100644 target/linux/sunxi/patches-3.13/150-1-dt-sun7i-add-gmac-clock-node.patch delete mode 100644 target/linux/sunxi/patches-3.13/150-2-dt-sun7i-add-gmac-ctrler-node.patch delete mode 100644 target/linux/sunxi/patches-3.13/150-3-dt-sun7i-gmac-add-pinmuxing.patch delete mode 100644 target/linux/sunxi/patches-3.13/151-0-stmmac-fixup-0.patch delete mode 100644 target/linux/sunxi/patches-3.13/151-1-stmmac-fixup-1.patch delete mode 100644 target/linux/sunxi/patches-3.13/151-2-stmmac-fixup-2.patch delete mode 100644 target/linux/sunxi/patches-3.13/151-3-stmmac-fixup-3.patch delete mode 100644 target/linux/sunxi/patches-3.13/151-4-stmmac-fixup-4.patch delete mode 100644 target/linux/sunxi/patches-3.13/151-5-stmmac-fixup-5.patch delete mode 100644 target/linux/sunxi/patches-3.13/151-6-stmmac-fixup-6.patch delete mode 100644 target/linux/sunxi/patches-3.13/151-7-stmmac-fixup-7.patch delete mode 100644 target/linux/sunxi/patches-3.13/151-8-stmmac-fixup-8.patch delete mode 100644 target/linux/sunxi/patches-3.13/151-9-stmmac-fixup-9.patch delete mode 100644 target/linux/sunxi/patches-3.13/152-1-dt-sun7i-enable-gmac-cubietruck.patch delete mode 100644 target/linux/sunxi/patches-3.13/152-2-dt-sun7i-enable-gmac-cubieboard2.patch delete mode 100644 target/linux/sunxi/patches-3.13/152-3-dt-sun7i-enable-gmac-a20-micro.patch delete mode 100644 target/linux/sunxi/patches-3.13/153-1-stmmac-enable-main-clock-when-probing.patch delete mode 100644 target/linux/sunxi/patches-3.13/153-2-stmmac-add-support-for-optional-reset-control.patch delete mode 100644 target/linux/sunxi/patches-3.13/153-3-stmmac-allocate-pass-board-specific-data-to-callbacks.patch delete mode 100644 target/linux/sunxi/patches-3.13/153-4-stmmac-honor-dt-parameter-to-dma-store-and-fwd.patch delete mode 100644 target/linux/sunxi/patches-3.13/153-5-stmmac-deprecate-snps-phy-addr.patch delete mode 100644 target/linux/sunxi/patches-3.13/153-6-stmmac-use-drvdata-callback-with-compat-strings.patch delete mode 100644 target/linux/sunxi/patches-3.13/153-7-stmmac-sunxi-extensions-for-a20.patch delete mode 100644 target/linux/sunxi/patches-3.13/160-1-phy-core-phy_get_leave-error-logging-to-caller.patch delete mode 100644 target/linux/sunxi/patches-3.13/160-2-phy-core-dont-porpagate-ENOSUPP.patch delete mode 100644 target/linux/sunxi/patches-3.13/160-3-phy-core-no-module-build.patch delete mode 100644 target/linux/sunxi/patches-3.13/160-4-libahci-allow-override-start_engine.patch delete mode 100644 target/linux/sunxi/patches-3.13/160-5-ahci-platform-devs-with-more-than-1-clock.patch delete mode 100644 target/linux/sunxi/patches-3.13/160-6-ahci-platform-support-optional-regulator.patch delete mode 100644 target/linux/sunxi/patches-3.13/160-7-ahci-platform-add-resource-helpers.patch delete mode 100644 target/linux/sunxi/patches-3.13/160-8-ahci-plat-libraryise-ahci_probe.patch delete mode 100644 target/linux/sunxi/patches-3.13/160-9-ahci-plat-libraryise-suspend-resume.patch delete mode 100644 target/linux/sunxi/patches-3.13/161-ahci-add-sunxi-to-ahci_platform.patch delete mode 100644 target/linux/sunxi/patches-3.13/162-1-ahci-plat-add-dt-compat.patch delete mode 100644 target/linux/sunxi/patches-3.13/162-2-ahci-plat-manage-sata-phy.patch delete mode 100644 target/linux/sunxi/patches-3.13/162-3-ahci-plat-runtime-resume.patch delete mode 100644 target/linux/sunxi/patches-3.13/163-ahci_sunxi-use-mdelay.patch delete mode 100644 target/linux/sunxi/patches-3.13/164-1-dt-sun4i-add-ahci.patch delete mode 100644 target/linux/sunxi/patches-3.13/164-2-dt-sun7i-add-ahci.patch delete mode 100644 target/linux/sunxi/patches-3.13/170-1-mmc-add-driver.patch delete mode 100644 target/linux/sunxi/patches-3.13/170-2-mmc-simplify-clkdelay.patch delete mode 100644 target/linux/sunxi/patches-3.13/170-3-mmc-dont-set-mmc_clk-in-lowpower.patch delete mode 100644 target/linux/sunxi/patches-3.13/170-4-mmc-stop-claiming-UHS.patch delete mode 100644 target/linux/sunxi/patches-3.13/170-5-mmc-fix-caps-override.patch delete mode 100644 target/linux/sunxi/patches-3.13/170-6-mmc-dont-call-mmc_of_parser-until-ready.patch delete mode 100644 target/linux/sunxi/patches-3.13/170-7-clk-export-mmc-phasectrl.patch delete mode 100644 target/linux/sunxi/patches-3.13/170-8-clk-sunxi-implement-mmc-phasectrl.patch delete mode 100644 target/linux/sunxi/patches-3.13/170-9-mmc-fixup-revert-sdio.patch delete mode 100644 target/linux/sunxi/patches-3.13/171-1-pinctrl-sunxi-fix-port-F-multiplexing.patch delete mode 100644 target/linux/sunxi/patches-3.13/171-3-pinctrl-sunxi-fix-masking-with-irqtype.patch delete mode 100644 target/linux/sunxi/patches-3.13/171-4-pinctrl-sunxi-fix-irqregister-offset-calcs.patch delete mode 100644 target/linux/sunxi/patches-3.13/173-1-dt-sun4i-add-mmc.patch delete mode 100644 target/linux/sunxi/patches-3.13/173-2-dt-sun5i-add-mmc.patch delete mode 100644 target/linux/sunxi/patches-3.13/173-3-dt-sun7i-add-mmc.patch delete mode 100644 target/linux/sunxi/patches-3.13/173-5-dt-sun5i-fixup-mmc.patch delete mode 100644 target/linux/sunxi/patches-3.13/173-6-dt-sun7i-fixup-mmc.patch delete mode 100644 target/linux/sunxi/patches-3.13/175-lradc-add-driver.patch delete mode 100644 target/linux/sunxi/patches-3.13/176-1-dt-sun7i-add-lradc.patch delete mode 100644 target/linux/sunxi/patches-3.13/176-2-dt-sun4i-add-lradc.patch delete mode 100644 target/linux/sunxi/patches-3.13/176-3-dt-sun5i-add-lradc.patch delete mode 100644 target/linux/sunxi/patches-3.13/180-0-usb-backport-device_wakeup_enable.patch delete mode 100644 target/linux/sunxi/patches-3.13/180-1-usb-ohci-platform-dt-instantiation.patch delete mode 100644 target/linux/sunxi/patches-3.13/180-2-usb-ehci-platform-support-clk-phy-via-dt.patch delete mode 100644 target/linux/sunxi/patches-3.13/180-3-usb-ohci-platform-support-bigendian.patch delete mode 100644 target/linux/sunxi/patches-3.13/180-4-usb-ehci-platform-support-bigendian.patch delete mode 100644 target/linux/sunxi/patches-3.13/180-5-usb-ohci-change-compat-string.patch delete mode 100644 target/linux/sunxi/patches-3.13/180-6-usb-ehci-change-compat-string.patch delete mode 100644 target/linux/sunxi/patches-3.13/180-7-usb-uhci-change-compat-string.patch delete mode 100644 target/linux/sunxi/patches-3.13/180-8-usb-xhci-change-compat-string.patch delete mode 100644 target/linux/sunxi/patches-3.13/180-9-clk-sunxi-add-usb-clockreg-reset.patch delete mode 100644 target/linux/sunxi/patches-3.13/180-a-clk-sunxi-add-usb-clockreg-defs.patch delete mode 100644 target/linux/sunxi/patches-3.13/181-1-dt-sun4i-add-vbus-reg-dtsi.patch delete mode 100644 target/linux/sunxi/patches-3.13/181-2-dt-sun5i-add-vbus-reg-dtsi.patch delete mode 100644 target/linux/sunxi/patches-3.13/182-usb-add-ehci-driver.patch delete mode 100644 target/linux/sunxi/patches-3.13/183-1-dt-sun4i-add-usbclock-nodes.patch delete mode 100644 target/linux/sunxi/patches-3.13/183-2-dt-sun4i-add-usb-bindings.patch delete mode 100644 target/linux/sunxi/patches-3.13/183-3-dt-sun4i-add-ehci-cubieboard.patch delete mode 100644 target/linux/sunxi/patches-3.13/183-4-dt-sun4i-add-ehci-a1000.patch delete mode 100644 target/linux/sunxi/patches-3.13/184-1-dt-sun7i-add-usbclock-nodes.patch delete mode 100644 target/linux/sunxi/patches-3.13/184-2-dt-sun7i-add-usb-bindings.patch delete mode 100644 target/linux/sunxi/patches-3.13/184-3-dt-sun7i-add-ehci-cubieboard2.patch delete mode 100644 target/linux/sunxi/patches-3.13/184-4-dt-sun7i-add-ehci-olinuxino-a20-micro.patch delete mode 100644 target/linux/sunxi/patches-3.13/184-5-dt-sun7i-add-ehci-cubietruck.patch delete mode 100644 target/linux/sunxi/patches-3.13/185-1-dt-sun5i-add-usbclock-nodes.patch delete mode 100644 target/linux/sunxi/patches-3.13/185-2-dt-sun5i-add-usb-bindings.patch delete mode 100644 target/linux/sunxi/patches-3.13/185-3-dt-sun5i-add-ehci-a13.patch delete mode 100644 target/linux/sunxi/patches-3.13/190-sunxi-select-PSCI.patch delete mode 100644 target/linux/sunxi/patches-3.13/200-sun5i-timer-add-support-for-reset-ctrler.patch delete mode 100644 target/linux/sunxi/patches-3.13/201-reset-add-of_reset_control_get.patch delete mode 100644 target/linux/sunxi/patches-3.13/202-reset-rename-compat-prop.patch delete mode 100644 target/linux/sunxi/patches-3.13/210-clk-sunxi-add-a20-output-clk.patch delete mode 100644 target/linux/sunxi/patches-3.13/211-pinctrl-sunxi-add-a20-output-clkpin-funcs.patch delete mode 100644 target/linux/sunxi/patches-3.13/212-dt-sun7i-add-pinmuxing-for-extclocks.patch delete mode 100644 target/linux/sunxi/patches-3.13/220-dt-sun4i-move-aliases-to-dtsi.patch delete mode 100644 target/linux/sunxi/patches-3.13/230-dt-sunxi-change-emac-to-new-compats.patch delete mode 100644 target/linux/sunxi/patches-3.13/231-dt-sunxi-net-phy-add-new-compats.patch delete mode 100644 target/linux/sunxi/patches-3.13/232-dt-sunxi-change-to-new-net-compats.patch delete mode 100644 target/linux/sunxi/patches-3.13/240-1-dt-sun4i-add-missing-serial-aliases.patch delete mode 100644 target/linux/sunxi/patches-3.13/240-2-dt-sun5i-a10s-add-missing-serial-aliases.patch delete mode 100644 target/linux/sunxi/patches-3.13/240-3-dt-sun5i-a13-add-missing-serial-aliases.patch delete mode 100644 target/linux/sunxi/patches-3.13/240-4-dt-sun6i-add-missing-serial-aliases.patch delete mode 100644 target/linux/sunxi/patches-3.13/241-dt-sun7i-add-pinmuxing-for-uart2.patch delete mode 100644 target/linux/sunxi/patches-3.13/250-clk-sunxi-get-divs-parent-clkname.patch delete mode 100644 target/linux/sunxi/patches-3.13/251-clk-sunxi-add-clk-output-names-dt-prop.patch delete mode 100644 target/linux/sunxi/patches-3.13/252-clk-sunxi-add-names-for-pll5-6-into-factors_data.patch delete mode 100644 target/linux/sunxi/patches-3.13/253-clk-sunxi-add-a20a31-gmac-clock.patch delete mode 100644 target/linux/sunxi/patches-3.13/254-dt-sun7i-change-32k-osc-nodename.patch delete mode 100644 target/linux/sunxi/patches-3.13/255-clk-sunxi-add-a31-pll6.patch delete mode 100644 target/linux/sunxi/patches-3.13/260-spi-add-a31-spi-driver.patch delete mode 100644 target/linux/sunxi/patches-3.13/261-dt-sun6i-add-pll6-and-spi.patch delete mode 100644 target/linux/sunxi/patches-3.13/262-spi-add-a10-spi-driver.patch delete mode 100644 target/linux/sunxi/patches-3.13/263-1-dt-sun7i-add-a20-spi.patch delete mode 100644 target/linux/sunxi/patches-3.13/263-2-dt-sun4i-add-a10-spi.patch delete mode 100644 target/linux/sunxi/patches-3.13/263-3-dt-sun5i-a10s-add-a10-spi.patch delete mode 100644 target/linux/sunxi/patches-3.13/263-4-dt-sun5i-a13-add-a10-spi.patch delete mode 100644 target/linux/sunxi/patches-3.13/263-5-dt-sun7i-add-spi-muxing.patch delete mode 100644 target/linux/sunxi/patches-3.13/264-5-dt-sun7i-enable-spi-on-a20micro.patch delete mode 100644 target/linux/sunxi/patches-3.13/270-1-wdt-sunxi-introduce-new-compat.patch delete mode 100644 target/linux/sunxi/patches-3.13/270-2-wdt-sunxi-add-new-wdt-compats-into-reboot-code.patch delete mode 100644 target/linux/sunxi/patches-3.13/270-3-dt-sunxi-watchdog-update-compats.patch delete mode 100644 target/linux/sunxi/patches-3.13/280-input-add-sun4i-ts-driver.patch delete mode 100644 target/linux/sunxi/patches-3.13/301-1-dt-sun4i-add-pcduino.patch delete mode 100644 target/linux/sunxi/patches-3.13/301-2-dt-sun4i-pcduino-add-mmc.patch delete mode 100644 target/linux/sunxi/patches-3.13/301-3-dt-sun4i-pcduino-add-usb.patch delete mode 100644 target/linux/sunxi/patches-3.13/302-dt-sun4i-add-lime.patch delete mode 100644 target/linux/sunxi/patches-3.13/303-dt-add-pcduinov3.patch delete mode 100644 target/linux/sunxi/patches-3.13/304-dt-add-bananapi.patch diff --git a/target/linux/sunxi/config-3.13 b/target/linux/sunxi/config-3.13 deleted file mode 100644 index 6577df6042..0000000000 --- a/target/linux/sunxi/config-3.13 +++ /dev/null @@ -1,430 +0,0 @@ -CONFIG_AHCI_SUNXI=y -CONFIG_ALIGNMENT_TRAP=y -# CONFIG_APM_EMULATION is not set -CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y -CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y -CONFIG_ARCH_HAS_RESET_CONTROLLER=y -CONFIG_ARCH_HAS_TICK_BROADCAST=y -CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y -CONFIG_ARCH_MULTIPLATFORM=y -# CONFIG_ARCH_MULTI_CPU_AUTO is not set -CONFIG_ARCH_MULTI_V6_V7=y -CONFIG_ARCH_MULTI_V7=y -# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set -CONFIG_ARCH_NR_GPIO=288 -CONFIG_ARCH_REQUIRE_GPIOLIB=y -# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set -# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set -CONFIG_ARCH_SUNXI=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y -CONFIG_ARCH_WANT_GENERAL_HUGETLB=y -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y -CONFIG_ARM=y -CONFIG_ARM_APPENDED_DTB=y -CONFIG_ARM_ATAG_DTB_COMPAT=y -# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set -CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y -# CONFIG_ARM_CPU_SUSPEND is not set -CONFIG_ARM_ERRATA_430973=y -CONFIG_ARM_ERRATA_720789=y -CONFIG_ARM_ERRATA_754322=y -CONFIG_ARM_ERRATA_775420=y -CONFIG_ARM_GIC=y -CONFIG_ARM_L1_CACHE_SHIFT=6 -CONFIG_ARM_L1_CACHE_SHIFT_6=y -# CONFIG_ARM_LPAE is not set -CONFIG_ARM_NR_BANKS=8 -CONFIG_ARM_PATCH_PHYS_VIRT=y -CONFIG_ARM_PSCI=y -CONFIG_ARM_THUMB=y -# CONFIG_ARM_THUMBEE is not set -CONFIG_ARM_VIRT_EXT=y -CONFIG_ATA=y -CONFIG_ATAGS=y -CONFIG_AUDIT=y -# CONFIG_AUDITSYSCALL is not set -CONFIG_AUDIT_GENERIC=y -CONFIG_AUTO_ZRELADDR=y -CONFIG_AVERAGE=y -CONFIG_BCH=y -CONFIG_BINFMT_MISC=y -CONFIG_BLK_CGROUP=y -CONFIG_BLK_DEV_SD=y -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_BOUNCE=y -CONFIG_BRIDGE_IGMP_SNOOPING=y -# CONFIG_CACHE_L2X0 is not set -CONFIG_CFQ_GROUP_IOSCHED=y -CONFIG_CGROUPS=y -CONFIG_CGROUP_CPUACCT=y -CONFIG_CGROUP_DEVICE=y -CONFIG_CGROUP_FREEZER=y -# CONFIG_CGROUP_PERF is not set -# CONFIG_CGROUP_SCHED is not set -CONFIG_CLKDEV_LOOKUP=y -CONFIG_CLKSRC_MMIO=y -CONFIG_CLKSRC_OF=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_CMDLINE="console=ttyS0,115200 earlyprintk rootwait root=/dev/mmcblk0p2" -CONFIG_CMDLINE_FORCE=y -CONFIG_COMMON_CLK=y -CONFIG_COMPACTION=y -CONFIG_CONFIGFS_FS=y -CONFIG_CONNECTOR=y -CONFIG_CONSOLE_TRANSLATIONS=y -CONFIG_COREDUMP=y -CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y -CONFIG_CPUSETS=y -CONFIG_CPU_32v6K=y -CONFIG_CPU_32v7=y -CONFIG_CPU_ABRT_EV7=y -# CONFIG_CPU_BPREDICT_DISABLE is not set -CONFIG_CPU_CACHE_V7=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y -CONFIG_CPU_HAS_ASID=y -# CONFIG_CPU_ICACHE_DISABLE is not set -CONFIG_CPU_PABRT_V7=y -CONFIG_CPU_RMAP=y -CONFIG_CPU_TLB_V7=y -CONFIG_CPU_V7=y -CONFIG_CRC16=y -CONFIG_CRC_T10DIF=y -CONFIG_CRYPTO_ARC4=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_BLKCIPHER2=y -CONFIG_CRYPTO_CRC32C=y -CONFIG_CRYPTO_CRCT10DIF=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_WORKQUEUE=y -CONFIG_DCACHE_WORD_ACCESS=y -# CONFIG_DEBUG_BLK_CGROUP is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_KERNEL is not set -CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" -CONFIG_DEBUG_MEMORY_INIT=y -# CONFIG_DEBUG_UART_8250 is not set -# CONFIG_DEBUG_UART_PL01X is not set -# CONFIG_DEBUG_USER is not set -CONFIG_DECOMPRESS_BZIP2=y -CONFIG_DECOMPRESS_GZIP=y -CONFIG_DECOMPRESS_LZ4=y -CONFIG_DECOMPRESS_LZMA=y -CONFIG_DECOMPRESS_LZO=y -CONFIG_DECOMPRESS_XZ=y -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_DIRECT_IO=y -CONFIG_DMADEVICES=y -CONFIG_DMA_OF=y -CONFIG_DNOTIFY=y -CONFIG_DTC=y -CONFIG_DUMMY_CONSOLE=y -CONFIG_DWMAC_SUNXI=y -# CONFIG_DW_DMAC_CORE is not set -CONFIG_DYNAMIC_DEBUG=y -# CONFIG_EEPROM_SUNXI_SID is not set -CONFIG_ELF_CORE=y -# CONFIG_EMBEDDED is not set -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_EXPERT is not set -CONFIG_EXT4_FS=y -CONFIG_FRAME_POINTER=y -CONFIG_FRAME_WARN=2048 -CONFIG_FREEZER=y -CONFIG_FS_MBCACHE=y -CONFIG_FS_POSIX_ACL=y -CONFIG_GARP=y -CONFIG_GENERIC_ACL=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_GENERIC_IO=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_NET_UTILS=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_PHY=y -CONFIG_GENERIC_PINCONF=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_DEVRES=y -# CONFIG_HAMRADIO is not set -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_ARCH_PFN_VALID=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set -CONFIG_HAVE_BPF_JIT=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_CLK_PREPARE=y -CONFIG_HAVE_CONTEXT_TRACKING=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DEBUG_KMEMLEAK=y -CONFIG_HAVE_DMA_API_DEBUG=y -CONFIG_HAVE_DMA_ATTRS=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_HAVE_HW_BREAKPOINT=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_KERNEL_GZIP=y -CONFIG_HAVE_KERNEL_LZ4=y -CONFIG_HAVE_KERNEL_LZMA=y -CONFIG_HAVE_KERNEL_LZO=y -CONFIG_HAVE_KERNEL_XZ=y -CONFIG_HAVE_MEMBLOCK=y -CONFIG_HAVE_NET_DSA=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_HAVE_PERF_REGS=y -CONFIG_HAVE_PERF_USER_STACK_DUMP=y -CONFIG_HAVE_PROC_CPU=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_SMP=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_UID16=y -CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y -CONFIG_HIGHMEM=y -# CONFIG_HIGHPTE is not set -CONFIG_HW_CONSOLE=y -CONFIG_HZ_FIXED=0 -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_MUX=y -# CONFIG_I2C_MUX_GPIO is not set -# CONFIG_I2C_MUX_PCA9541 is not set -# CONFIG_I2C_MUX_PCA954x is not set -CONFIG_I2C_MUX_PINCTRL=y -CONFIG_I2C_MV64XXX=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_INPUT=y -# CONFIG_INPUT_MISC is not set -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_IOSCHED_CFQ=y -CONFIG_IPC_NS=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_BOOTP is not set -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_RARP is not set -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_WORK=y -CONFIG_KALLSYMS=y -CONFIG_KERNEL_GZIP=y -# CONFIG_KERNEL_XZ is not set -CONFIG_KEYBOARD_SUN4I_LRADC=y -CONFIG_KSM=y -CONFIG_KTIME_SCALAR=y -CONFIG_LEDS_GPIO=y -# CONFIG_LEDS_REGULATOR is not set -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -CONFIG_LOG_BUF_SHIFT=19 -CONFIG_LZ4_DECOMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_MDIO_BOARDINFO=y -CONFIG_MDIO_SUN4I=y -# CONFIG_MEMCG is not set -CONFIG_MIGRATION=y -CONFIG_MMC=y -CONFIG_MMC_BLOCK=y -# CONFIG_MMC_BLOCK_BOUNCE is not set -CONFIG_MMC_SUNXI=y -CONFIG_MMC_UNSAFE_RESUME=y -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_MULTI_IRQ_HANDLER=y -CONFIG_MUTEX_SPIN_ON_OWNER=y -CONFIG_NAMESPACES=y -CONFIG_NEED_DMA_MAP_STATE=y -# CONFIG_NEON is not set -# CONFIG_NETPRIO_CGROUP is not set -# CONFIG_NET_CLS_CGROUP is not set -CONFIG_NET_FLOW_LIMIT=y -CONFIG_NET_NS=y -CONFIG_NET_RX_BUSY_POLL=y -CONFIG_NET_VENDOR_ALLWINNER=y -CONFIG_NLS=y -CONFIG_NO_HZ=y -CONFIG_NO_HZ_COMMON=y -CONFIG_NO_HZ_IDLE=y -CONFIG_NR_CPUS=4 -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_MDIO=y -CONFIG_OF_MTD=y -CONFIG_OF_NET=y -CONFIG_OLD_SIGACTION=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_PAGE_OFFSET=0xC0000000 -# CONFIG_PARTITION_ADVANCED is not set -# CONFIG_PCI_SYSCALL is not set -CONFIG_PERF_EVENTS=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PHYLIB=y -CONFIG_PHY_SUN4I_USB=y -CONFIG_PID_NS=y -CONFIG_PINCTRL=y -# CONFIG_PINCTRL_SINGLE is not set -CONFIG_PINCTRL_SUNXI=y -CONFIG_PM=y -CONFIG_PM_CLK=y -# CONFIG_PM_DEBUG is not set -CONFIG_PM_RUNTIME=y -CONFIG_POWER_SUPPLY=y -CONFIG_PPS=y -CONFIG_PREEMPT=y -CONFIG_PREEMPT_COUNT=y -# CONFIG_PREEMPT_NONE is not set -CONFIG_PREEMPT_RCU=y -CONFIG_PRINTK_TIME=y -# CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_PROC_DEVICETREE=y -CONFIG_PROC_EVENTS=y -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_PROC_PID_CPUSET=y -CONFIG_PTP_1588_CLOCK=y -# CONFIG_QFMT_V1 is not set -# CONFIG_QFMT_V2 is not set -CONFIG_QUOTA=y -CONFIG_QUOTACTL=y -CONFIG_QUOTA_NETLINK_INTERFACE=y -# CONFIG_RCU_BOOST is not set -CONFIG_RCU_CPU_STALL_VERBOSE=y -CONFIG_RCU_STALL_COMMON=y -CONFIG_RD_BZIP2=y -CONFIG_RD_GZIP=y -CONFIG_RD_LZ4=y -CONFIG_RD_LZMA=y -CONFIG_RD_LZO=y -CONFIG_RD_XZ=y -CONFIG_REGMAP=y -CONFIG_REGULATOR=y -# CONFIG_REGULATOR_DEBUG is not set -CONFIG_REGULATOR_FIXED_VOLTAGE=y -# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set -CONFIG_RELAY=y -CONFIG_RESET_CONTROLLER=y -CONFIG_RESOURCE_COUNTERS=y -# CONFIG_RFKILL_REGULATOR is not set -CONFIG_RFS_ACCEL=y -CONFIG_RPS=y -CONFIG_SATA_AHCI_PLATFORM=y -CONFIG_SCHED_HRTICK=y -CONFIG_SCSI=y -CONFIG_SECURITYFS=y -CONFIG_SERIAL_8250_DW=y -CONFIG_SERIAL_8250_NR_UARTS=8 -CONFIG_SERIAL_8250_RUNTIME_UARTS=8 -CONFIG_SERIAL_8250_SYSRQ=y -CONFIG_SERIO=y -# CONFIG_SERIO_APBPS2 is not set -# CONFIG_SERIO_OLPC_APSP is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SLAB is not set -CONFIG_SLUB=y -CONFIG_SLUB_CPU_PARTIAL=y -CONFIG_SLUB_DEBUG=y -# CONFIG_SLUB_DEBUG_ON is not set -CONFIG_SMP=y -CONFIG_SMP_ON_UP=y -CONFIG_SPARSE_IRQ=y -CONFIG_SPI=y -CONFIG_SPI_MASTER=y -CONFIG_SPI_SUN4I=y -# CONFIG_SPI_SUN6I is not set -# CONFIG_STAGING is not set -# CONFIG_STMMAC_DA is not set -# CONFIG_STMMAC_DEBUG_FS is not set -CONFIG_STMMAC_ETH=y -CONFIG_STMMAC_PLATFORM=y -CONFIG_STOP_MACHINE=y -CONFIG_STRICT_DEVMEM=y -# CONFIG_SUN4I_EMAC is not set -CONFIG_SUN4I_TIMER=y -CONFIG_SUN5I_HSTIMER=y -CONFIG_SUNXI_WATCHDOG=y -CONFIG_SWIOTLB=y -CONFIG_SWP_EMULATE=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_TASKSTATS=y -CONFIG_TASK_DELAY_ACCT=y -CONFIG_TASK_IO_ACCOUNTING=y -CONFIG_TASK_XACCT=y -# CONFIG_TCP_CONG_ADVANCED is not set -# CONFIG_THUMB2_KERNEL is not set -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_TOUCHSCREEN_SUN4I=y -CONFIG_TREE_PREEMPT_RCU=y -CONFIG_UEVENT_HELPER_PATH="" -CONFIG_UID16=y -CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" -CONFIG_UNINLINE_SPIN_UNLOCK=y -CONFIG_USB=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_COMMON=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_HCD_PLATFORM=y -CONFIG_USB_STORAGE=y -CONFIG_USB_SUPPORT=y -# CONFIG_USER_NS is not set -CONFIG_USE_OF=y -CONFIG_UTS_NS=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_VFP=y -CONFIG_VFPv3=y -CONFIG_VLAN_8021Q_GVRP=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_WATCHDOG_CORE=y -# CONFIG_XEN is not set -CONFIG_XFRM_ALGO=y -CONFIG_XFRM_USER=y -CONFIG_XPS=y -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_ARMTHUMB=y -CONFIG_XZ_DEC_BCJ=y -CONFIG_ZBOOT_ROM_BSS=0 -CONFIG_ZBOOT_ROM_TEXT=0 -# CONFIG_ZBUD is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/sunxi/patches-3.13/100-clk-composite-determine-rate.patch b/target/linux/sunxi/patches-3.13/100-clk-composite-determine-rate.patch deleted file mode 100644 index 4984d15fd1..0000000000 --- a/target/linux/sunxi/patches-3.13/100-clk-composite-determine-rate.patch +++ /dev/null @@ -1,70 +0,0 @@ -From a968e9dc5983d258a4aa7e496d58c92e9e4cf670 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= -Date: Sat, 14 Sep 2013 21:37:59 -0300 -Subject: [PATCH] clk: composite: .determine_rate support -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This commit adds .determine_rate support to the composite clock. It will -use the .determine_rate callback from the rate component if available, -and fall back on the mux component otherwise. This allows composite -clocks to enjoy the benefits of automatic clock reparenting. - -Signed-off-by: Emilio López -Signed-off-by: Maxime Ripard ---- - drivers/clk/clk-composite.c | 28 ++++++++++++++++++++++++++++ - 1 file changed, 28 insertions(+) - ---- a/drivers/clk/clk-composite.c -+++ b/drivers/clk/clk-composite.c -@@ -55,6 +55,30 @@ static unsigned long clk_composite_recal - return rate_ops->recalc_rate(rate_hw, parent_rate); - } - -+static long clk_composite_determine_rate(struct clk_hw *hw, unsigned long rate, -+ unsigned long *best_parent_rate, -+ struct clk **best_parent_p) -+{ -+ struct clk_composite *composite = to_clk_composite(hw); -+ const struct clk_ops *rate_ops = composite->rate_ops; -+ const struct clk_ops *mux_ops = composite->mux_ops; -+ struct clk_hw *rate_hw = composite->rate_hw; -+ struct clk_hw *mux_hw = composite->mux_hw; -+ -+ if (rate_hw && rate_ops && rate_ops->determine_rate) { -+ rate_hw->clk = hw->clk; -+ return rate_ops->determine_rate(rate_hw, rate, best_parent_rate, -+ best_parent_p); -+ } else if (mux_hw && mux_ops && mux_ops->determine_rate) { -+ mux_hw->clk = hw->clk; -+ return mux_ops->determine_rate(rate_hw, rate, best_parent_rate, -+ best_parent_p); -+ } else { -+ pr_err("clk: clk_composite_determine_rate function called, but no mux or rate callback set!\n"); -+ return 0; -+ } -+} -+ - static long clk_composite_round_rate(struct clk_hw *hw, unsigned long rate, - unsigned long *prate) - { -@@ -147,6 +171,8 @@ struct clk *clk_register_composite(struc - composite->mux_ops = mux_ops; - clk_composite_ops->get_parent = clk_composite_get_parent; - clk_composite_ops->set_parent = clk_composite_set_parent; -+ if (mux_ops->determine_rate) -+ clk_composite_ops->determine_rate = clk_composite_determine_rate; - } - - if (rate_hw && rate_ops) { -@@ -170,6 +196,8 @@ struct clk *clk_register_composite(struc - composite->rate_hw = rate_hw; - composite->rate_ops = rate_ops; - clk_composite_ops->recalc_rate = clk_composite_recalc_rate; -+ if (rate_ops->determine_rate) -+ clk_composite_ops->determine_rate = clk_composite_determine_rate; - } - - if (gate_hw && gate_ops) { diff --git a/target/linux/sunxi/patches-3.13/101-fix-off-by-one-masks.patch b/target/linux/sunxi/patches-3.13/101-fix-off-by-one-masks.patch deleted file mode 100644 index f6d7a13d61..0000000000 --- a/target/linux/sunxi/patches-3.13/101-fix-off-by-one-masks.patch +++ /dev/null @@ -1,29 +0,0 @@ -From b3cb099f8b0cbe56fcfbb4fb9c7cce48afff41f0 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= -Date: Fri, 20 Sep 2013 22:03:10 -0300 -Subject: [PATCH] clk: sunxi: factors: fix off-by-one masks -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -The previous code would generate one bit too long masks, and was -needlessly complicated. This patch replaces it by simpler code that can -generate the masks correctly. - -Signed-off-by: Emilio López -Signed-off-by: Maxime Ripard ---- - drivers/clk/sunxi/clk-factors.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/clk/sunxi/clk-factors.c -+++ b/drivers/clk/sunxi/clk-factors.c -@@ -40,7 +40,7 @@ struct clk_factors { - - #define to_clk_factors(_hw) container_of(_hw, struct clk_factors, hw) - --#define SETMASK(len, pos) (((-1U) >> (31-len)) << (pos)) -+#define SETMASK(len, pos) (((1U << (len)) - 1) << (pos)) - #define CLRMASK(len, pos) (~(SETMASK(len, pos))) - #define FACTOR_GET(bit, len, reg) (((reg) & SETMASK(len, bit)) >> (bit)) - diff --git a/target/linux/sunxi/patches-3.13/102-clk-factors-clear-vars.patch b/target/linux/sunxi/patches-3.13/102-clk-factors-clear-vars.patch deleted file mode 100644 index b1396d67f0..0000000000 --- a/target/linux/sunxi/patches-3.13/102-clk-factors-clear-vars.patch +++ /dev/null @@ -1,27 +0,0 @@ -From 789bea92aba0256a7f5309992327df8729333750 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= -Date: Fri, 20 Sep 2013 22:03:11 -0300 -Subject: [PATCH] clk: sunxi: factors: clear variables before using them -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Random bits may get into our factors if we don't clear n, k, m and p. - -Signed-off-by: Emilio López -Signed-off-by: Maxime Ripard ---- - drivers/clk/sunxi/clk-factors.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/clk/sunxi/clk-factors.c -+++ b/drivers/clk/sunxi/clk-factors.c -@@ -88,7 +88,7 @@ static long clk_factors_round_rate(struc - static int clk_factors_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) - { -- u8 n, k, m, p; -+ u8 n = 0, k = 0, m = 0, p = 0; - u32 reg; - struct clk_factors *factors = to_clk_factors(hw); - struct clk_factors_config *config = factors->config; diff --git a/target/linux/sunxi/patches-3.13/103-sunxi-clk-core-clock-protect.patch b/target/linux/sunxi/patches-3.13/103-sunxi-clk-core-clock-protect.patch deleted file mode 100644 index 87c5b35995..0000000000 --- a/target/linux/sunxi/patches-3.13/103-sunxi-clk-core-clock-protect.patch +++ /dev/null @@ -1,66 +0,0 @@ -From 7df19a0adca7806e081479eecb07365652c26ef5 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= -Date: Fri, 20 Sep 2013 22:03:12 -0300 -Subject: [PATCH] clk: sunxi: protect core clocks from accidental shutdown -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Some important clocks may get disabled as a side effect of another clock -being disabled, because they have no consumers. This patch implements a -mechanism so those clocks can be claimed by the driver and therefore -remain enabled at all times. - -Signed-off-by: Emilio López -Signed-off-by: Maxime Ripard - -Conflicts: - drivers/clk/sunxi/clk-sunxi.c ---- - drivers/clk/sunxi/clk-sunxi.c | 28 ++++++++++++++++++++++++++++ - 1 file changed, 28 insertions(+) - ---- a/drivers/clk/sunxi/clk-sunxi.c -+++ b/drivers/clk/sunxi/clk-sunxi.c -@@ -616,6 +616,31 @@ static void __init of_sunxi_table_clock_ - } - } - -+/** -+ * System clock protection -+ * -+ * By enabling these critical clocks, we prevent their accidental gating -+ * by the framework -+ */ -+static void __init sunxi_clock_protect(void) -+{ -+ struct clk *clk; -+ -+ /* memory bus clock - sun5i+ */ -+ clk = clk_get(NULL, "mbus"); -+ if (!IS_ERR(clk)) { -+ clk_prepare_enable(clk); -+ clk_put(clk); -+ } -+ -+ /* DDR clock - sun4i+ */ -+ clk = clk_get(NULL, "pll5_ddr"); -+ if (!IS_ERR(clk)) { -+ clk_prepare_enable(clk); -+ clk_put(clk); -+ } -+} -+ - static void __init sunxi_init_clocks(struct device_node *np) - { - /* Register factor clocks */ -@@ -629,6 +654,9 @@ static void __init sunxi_init_clocks(str - - /* Register gate clocks */ - of_sunxi_table_clock_setup(clk_gates_match, sunxi_gates_clk_setup); -+ -+ /* Enable core system clocks */ -+ sunxi_clock_protect(); - } - CLK_OF_DECLARE(sun4i_a10_clk_init, "allwinner,sun4i-a10", sunxi_init_clocks); - CLK_OF_DECLARE(sun5i_a10s_clk_init, "allwinner,sun5i-a10s", sunxi_init_clocks); diff --git a/target/linux/sunxi/patches-3.13/104-clk-sunxi-fix-memory-leak.patch b/target/linux/sunxi/patches-3.13/104-clk-sunxi-fix-memory-leak.patch deleted file mode 100644 index 8f2e42fa9e..0000000000 --- a/target/linux/sunxi/patches-3.13/104-clk-sunxi-fix-memory-leak.patch +++ /dev/null @@ -1,63 +0,0 @@ -From 9dc8189536f4c59bb7ad8c736021cefc1488bf74 Mon Sep 17 00:00:00 2001 -From: "Victor N. Ramos Mello" -Date: Fri, 18 Oct 2013 20:27:51 -0300 -Subject: [PATCH] drivers: clk: sunxi: Fix memory leakage in clk-sunxi.c - -Fix a possible memory leak in sun4i_osc_clk_setup(). -Moved clock-frequency check to save superfluous allocation. - -Signed-off-by: Victor N. Ramos Mello -Signed-off-by: Maxime Ripard ---- - drivers/clk/sunxi/clk-sunxi.c | 28 +++++++++++++++++----------- - 1 file changed, 17 insertions(+), 11 deletions(-) - ---- a/drivers/clk/sunxi/clk-sunxi.c -+++ b/drivers/clk/sunxi/clk-sunxi.c -@@ -37,18 +37,16 @@ static void __init sun4i_osc_clk_setup(s - const char *clk_name = node->name; - u32 rate; - -+ if (of_property_read_u32(node, "clock-frequency", &rate)) -+ return; -+ - /* allocate fixed-rate and gate clock structs */ - fixed = kzalloc(sizeof(struct clk_fixed_rate), GFP_KERNEL); - if (!fixed) - return; - gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL); -- if (!gate) { -- kfree(fixed); -- return; -- } -- -- if (of_property_read_u32(node, "clock-frequency", &rate)) -- return; -+ if (!gate) -+ goto err_free_fixed; - - /* set up gate and fixed rate properties */ - gate->reg = of_iomap(node, 0); -@@ -63,10 +61,18 @@ static void __init sun4i_osc_clk_setup(s - &gate->hw, &clk_gate_ops, - CLK_IS_ROOT); - -- if (!IS_ERR(clk)) { -- of_clk_add_provider(node, of_clk_src_simple_get, clk); -- clk_register_clkdev(clk, clk_name, NULL); -- } -+ if (IS_ERR(clk)) -+ goto err_free_gate; -+ -+ of_clk_add_provider(node, of_clk_src_simple_get, clk); -+ clk_register_clkdev(clk, clk_name, NULL); -+ -+ return; -+ -+err_free_gate: -+ kfree(gate); -+err_free_fixed: -+ kfree(fixed); - } - CLK_OF_DECLARE(sun4i_osc, "allwinner,sun4i-osc-clk", sun4i_osc_clk_setup); - diff --git a/target/linux/sunxi/patches-3.13/105-reset-add-reset-ctrler.patch b/target/linux/sunxi/patches-3.13/105-reset-add-reset-ctrler.patch deleted file mode 100644 index b99720396f..0000000000 --- a/target/linux/sunxi/patches-3.13/105-reset-add-reset-ctrler.patch +++ /dev/null @@ -1,206 +0,0 @@ -From 8015cea648c452bbfe0fc820dcb1185beaeb8736 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Tue, 24 Sep 2013 11:07:43 +0300 -Subject: [PATCH] reset: Add Allwinner SoCs Reset Controller Driver - -The Allwinner A31 and most of the other Allwinner SoCs have an IP -maintaining a few other IPs in the SoC in reset by default. Among these -IPs are the A31's High Speed Timers, hence why we can't use the regular -driver construct in every cases, and need to call the registering -function directly during machine initialisation. - -Apart from this, the implementation is fairly straightforward, and could -easily be moved to a generic MMIO-based reset controller driver if the -need ever arise. - -Signed-off-by: Maxime Ripard -Acked-by: Philipp Zabel ---- - drivers/reset/Makefile | 1 + - drivers/reset/reset-sunxi.c | 175 ++++++++++++++++++++++++++++++++++++++++++++ - 2 files changed, 176 insertions(+) - create mode 100644 drivers/reset/reset-sunxi.c - ---- a/drivers/reset/Makefile -+++ b/drivers/reset/Makefile -@@ -1 +1,2 @@ - obj-$(CONFIG_RESET_CONTROLLER) += core.o -+obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o ---- /dev/null -+++ b/drivers/reset/reset-sunxi.c -@@ -0,0 +1,175 @@ -+/* -+ * Allwinner SoCs Reset Controller driver -+ * -+ * Copyright 2013 Maxime Ripard -+ * -+ * Maxime Ripard -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+struct sunxi_reset_data { -+ spinlock_t lock; -+ void __iomem *membase; -+ struct reset_controller_dev rcdev; -+}; -+ -+static int sunxi_reset_assert(struct reset_controller_dev *rcdev, -+ unsigned long id) -+{ -+ struct sunxi_reset_data *data = container_of(rcdev, -+ struct sunxi_reset_data, -+ rcdev); -+ int bank = id / BITS_PER_LONG; -+ int offset = id % BITS_PER_LONG; -+ unsigned long flags; -+ u32 reg; -+ -+ spin_lock_irqsave(&data->lock, flags); -+ -+ reg = readl(data->membase + (bank * 4)); -+ writel(reg & ~BIT(offset), data->membase + (bank * 4)); -+ -+ spin_unlock_irqrestore(&data->lock, flags); -+ -+ return 0; -+} -+ -+static int sunxi_reset_deassert(struct reset_controller_dev *rcdev, -+ unsigned long id) -+{ -+ struct sunxi_reset_data *data = container_of(rcdev, -+ struct sunxi_reset_data, -+ rcdev); -+ int bank = id / BITS_PER_LONG; -+ int offset = id % BITS_PER_LONG; -+ unsigned long flags; -+ u32 reg; -+ -+ spin_lock_irqsave(&data->lock, flags); -+ -+ reg = readl(data->membase + (bank * 4)); -+ writel(reg | BIT(offset), data->membase + (bank * 4)); -+ -+ spin_unlock_irqrestore(&data->lock, flags); -+ -+ return 0; -+} -+ -+static struct reset_control_ops sunxi_reset_ops = { -+ .assert = sunxi_reset_assert, -+ .deassert = sunxi_reset_deassert, -+}; -+ -+static int sunxi_reset_init(struct device_node *np) -+{ -+ struct sunxi_reset_data *data; -+ struct resource res; -+ resource_size_t size; -+ int ret; -+ -+ data = kzalloc(sizeof(*data), GFP_KERNEL); -+ if (!data) -+ return -ENOMEM; -+ -+ ret = of_address_to_resource(np, 0, &res); -+ if (ret) -+ goto err_alloc; -+ -+ size = resource_size(&res); -+ if (!request_mem_region(res.start, size, np->name)) { -+ ret = -EBUSY; -+ goto err_alloc; -+ } -+ -+ data->membase = ioremap(res.start, size); -+ if (!data->membase) { -+ ret = -ENOMEM; -+ goto err_alloc; -+ } -+ -+ data->rcdev.owner = THIS_MODULE; -+ data->rcdev.nr_resets = size * 32; -+ data->rcdev.ops = &sunxi_reset_ops; -+ data->rcdev.of_node = np; -+ reset_controller_register(&data->rcdev); -+ -+ return 0; -+ -+err_alloc: -+ kfree(data); -+ return ret; -+}; -+ -+/* -+ * These are the reset controller we need to initialize early on in -+ * our system, before we can even think of using a regular device -+ * driver for it. -+ */ -+static const struct of_device_id sunxi_early_reset_dt_ids[] __initdata = { -+ { .compatible = "allwinner,sun6i-a31-ahb1-reset", }, -+ { /* sentinel */ }, -+}; -+ -+void __init sun6i_reset_init(void) -+{ -+ struct device_node *np; -+ -+ for_each_matching_node(np, sunxi_early_reset_dt_ids) -+ sunxi_reset_init(np); -+} -+ -+/* -+ * And these are the controllers we can register through the regular -+ * device model. -+ */ -+static const struct of_device_id sunxi_reset_dt_ids[] = { -+ { .compatible = "allwinner,sun6i-a31-clock-reset", }, -+ { /* sentinel */ }, -+}; -+MODULE_DEVICE_TABLE(of, sunxi_reset_dt_ids); -+ -+static int sunxi_reset_probe(struct platform_device *pdev) -+{ -+ return sunxi_reset_init(pdev->dev.of_node); -+} -+ -+static int sunxi_reset_remove(struct platform_device *pdev) -+{ -+ struct sunxi_reset_data *data = platform_get_drvdata(pdev); -+ -+ reset_controller_unregister(&data->rcdev); -+ iounmap(data->membase); -+ kfree(data); -+ -+ return 0; -+} -+ -+static struct platform_driver sunxi_reset_driver = { -+ .probe = sunxi_reset_probe, -+ .remove = sunxi_reset_remove, -+ .driver = { -+ .name = "sunxi-reset", -+ .owner = THIS_MODULE, -+ .of_match_table = sunxi_reset_dt_ids, -+ }, -+}; -+module_platform_driver(sunxi_reset_driver); -+ -+MODULE_AUTHOR("Maxime Ripard -Date: Tue, 24 Sep 2013 11:09:55 +0300 -Subject: [PATCH] ARM: sunxi: Select ARCH_HAS_RESET_CONTROLLER - -The A31 has a reset controller, and we have to select this option to -have access to the reset controller framework. - -Signed-off-by: Maxime Ripard -Acked-by: Philipp Zabel ---- - arch/arm/mach-sunxi/Kconfig | 1 + - 1 file changed, 1 insertion(+) - ---- a/arch/arm/mach-sunxi/Kconfig -+++ b/arch/arm/mach-sunxi/Kconfig -@@ -1,5 +1,6 @@ - config ARCH_SUNXI - bool "Allwinner A1X SOCs" if ARCH_MULTI_V7 -+ select ARCH_HAS_RESET_CONTROLLER - select ARCH_REQUIRE_GPIOLIB - select ARM_GIC - select CLKSRC_MMIO diff --git a/target/linux/sunxi/patches-3.13/107-sunxi-register-a31-reset.patch b/target/linux/sunxi/patches-3.13/107-sunxi-register-a31-reset.patch deleted file mode 100644 index fcbb64ff14..0000000000 --- a/target/linux/sunxi/patches-3.13/107-sunxi-register-a31-reset.patch +++ /dev/null @@ -1,45 +0,0 @@ -From dae0e37c2df466f5eb6459d05f392e86b4236666 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Sat, 5 Oct 2013 14:53:48 +0200 -Subject: [PATCH] ARM: sunxi: Register the A31 reset IP in init_time - -The A31 has a reset IP that maintains a few other IPs in reset by -default. Among these IPs are the UARTs, and most notably the timers. We -thus need to register the reset driver before initializing the timers so -that the reset timer can use the reset framework. - -Signed-off-by: Maxime Ripard -Acked-by: Philipp Zabel ---- - arch/arm/mach-sunxi/sunxi.c | 11 +++++++++++ - 1 file changed, 11 insertions(+) - ---- a/arch/arm/mach-sunxi/sunxi.c -+++ b/arch/arm/mach-sunxi/sunxi.c -@@ -10,6 +10,8 @@ - * warranty of any kind, whether express or implied. - */ - -+#include -+#include - #include - #include - #include -@@ -132,8 +134,17 @@ static const char * const sun6i_board_dt - NULL, - }; - -+extern void __init sun6i_reset_init(void); -+static void __init sun6i_timer_init(void) -+{ -+ of_clk_init(NULL); -+ sun6i_reset_init(); -+ clocksource_of_init(); -+} -+ - DT_MACHINE_START(SUN6I_DT, "Allwinner sun6i (A31) Family") - .init_machine = sunxi_dt_init, -+ .init_time = sun6i_timer_init, - .dt_compat = sun6i_board_dt_compat, - .restart = sun6i_restart, - MACHINE_END diff --git a/target/linux/sunxi/patches-3.13/108-sun6i-add-smp-support.patch b/target/linux/sunxi/patches-3.13/108-sun6i-add-smp-support.patch deleted file mode 100644 index 24689e5382..0000000000 --- a/target/linux/sunxi/patches-3.13/108-sun6i-add-smp-support.patch +++ /dev/null @@ -1,206 +0,0 @@ -From 6f5002c91f35f6b171bc608b87b3f2b55451f32b Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Sun, 3 Nov 2013 10:30:13 +0100 -Subject: [PATCH] ARM: sun6i: Add SMP support for the Allwinner A31 - -The A31 is a quad Cortex-A7. Add the logic to use the IPs used to -control the CPU configuration and the CPU power so that we can bring up -secondary CPUs at boot. - -Signed-off-by: Maxime Ripard ---- - arch/arm/mach-sunxi/Makefile | 1 + - arch/arm/mach-sunxi/common.h | 19 +++++++ - arch/arm/mach-sunxi/headsmp.S | 9 +++ - arch/arm/mach-sunxi/platsmp.c | 124 ++++++++++++++++++++++++++++++++++++++++++ - arch/arm/mach-sunxi/sunxi.c | 3 + - 5 files changed, 156 insertions(+) - create mode 100644 arch/arm/mach-sunxi/common.h - create mode 100644 arch/arm/mach-sunxi/headsmp.S - create mode 100644 arch/arm/mach-sunxi/platsmp.c - ---- a/arch/arm/mach-sunxi/Makefile -+++ b/arch/arm/mach-sunxi/Makefile -@@ -1 +1,2 @@ - obj-$(CONFIG_ARCH_SUNXI) += sunxi.o -+obj-$(CONFIG_SMP) += platsmp.o headsmp.o ---- /dev/null -+++ b/arch/arm/mach-sunxi/common.h -@@ -0,0 +1,19 @@ -+/* -+ * Core functions for Allwinner SoCs -+ * -+ * Copyright (C) 2013 Maxime Ripard -+ * -+ * Maxime Ripard -+ * -+ * This file is licensed under the terms of the GNU General Public -+ * License version 2. This program is licensed "as is" without any -+ * warranty of any kind, whether express or implied. -+ */ -+ -+#ifndef __ARCH_SUNXI_COMMON_H_ -+#define __ARCH_SUNXI_COMMON_H_ -+ -+void sun6i_secondary_startup(void); -+extern struct smp_operations sun6i_smp_ops; -+ -+#endif /* __ARCH_SUNXI_COMMON_H_ */ ---- /dev/null -+++ b/arch/arm/mach-sunxi/headsmp.S -@@ -0,0 +1,9 @@ -+#include -+#include -+ -+ .section ".text.head", "ax" -+ -+ENTRY(sun6i_secondary_startup) -+ msr cpsr_fsxc, #0xd3 -+ b secondary_startup -+ENDPROC(sun6i_secondary_startup) ---- /dev/null -+++ b/arch/arm/mach-sunxi/platsmp.c -@@ -0,0 +1,124 @@ -+/* -+ * SMP support for Allwinner SoCs -+ * -+ * Copyright (C) 2013 Maxime Ripard -+ * -+ * Maxime Ripard -+ * -+ * Based on code -+ * Copyright (C) 2012-2013 Allwinner Ltd. -+ * -+ * This file is licensed under the terms of the GNU General Public -+ * License version 2. This program is licensed "as is" without any -+ * warranty of any kind, whether express or implied. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "common.h" -+ -+#define CPUCFG_CPU_PWR_CLAMP_STATUS_REG(cpu) ((cpu) * 0x40 + 0x64) -+#define CPUCFG_CPU_RST_CTRL_REG(cpu) (((cpu) + 1) * 0x40) -+#define CPUCFG_CPU_CTRL_REG(cpu) (((cpu) + 1) * 0x40 + 0x04) -+#define CPUCFG_CPU_STATUS_REG(cpu) (((cpu) + 1) * 0x40 + 0x08) -+#define CPUCFG_GEN_CTRL_REG 0x184 -+#define CPUCFG_PRIVATE0_REG 0x1a4 -+#define CPUCFG_PRIVATE1_REG 0x1a8 -+#define CPUCFG_DBG_CTL0_REG 0x1e0 -+#define CPUCFG_DBG_CTL1_REG 0x1e4 -+ -+#define PRCM_CPU_PWROFF_REG 0x100 -+#define PRCM_CPU_PWR_CLAMP_REG(cpu) (((cpu) * 4) + 0x140) -+ -+static void __iomem *cpucfg_membase; -+static void __iomem *prcm_membase; -+ -+static DEFINE_SPINLOCK(cpu_lock); -+ -+static void __init sun6i_smp_prepare_cpus(unsigned int max_cpus) -+{ -+ struct device_node *node; -+ -+ node = of_find_compatible_node(NULL, NULL, "allwinner,sun6i-a31-prcm"); -+ if (!node) { -+ pr_err("Missing A31 PRCM node in the device tree\n"); -+ return; -+ } -+ -+ prcm_membase = of_iomap(node, 0); -+ if (!prcm_membase) { -+ pr_err("Couldn't map A31 PRCM registers\n"); -+ return; -+ } -+ -+ node = of_find_compatible_node(NULL, NULL, -+ "allwinner,sun6i-a31-cpuconfig"); -+ if (!node) { -+ pr_err("Missing A31 CPU config node in the device tree\n"); -+ return; -+ } -+ -+ cpucfg_membase = of_iomap(node, 0); -+ if (!cpucfg_membase) -+ pr_err("Couldn't map A31 CPU config registers\n"); -+ -+} -+ -+static int sun6i_smp_boot_secondary(unsigned int cpu, -+ struct task_struct *idle) -+{ -+ u32 reg; -+ int i; -+ -+ if (!(prcm_membase && cpucfg_membase)) -+ return -EFAULT; -+ -+ spin_lock(&cpu_lock); -+ -+ /* Set CPU boot address */ -+ writel(virt_to_phys(sun6i_secondary_startup), -+ cpucfg_membase + CPUCFG_PRIVATE0_REG); -+ -+ /* Assert the CPU core in reset */ -+ writel(0, cpucfg_membase + CPUCFG_CPU_RST_CTRL_REG(cpu)); -+ -+ /* Assert the L1 cache in reset */ -+ reg = readl(cpucfg_membase + CPUCFG_GEN_CTRL_REG); -+ writel(reg & ~BIT(cpu), cpucfg_membase + CPUCFG_GEN_CTRL_REG); -+ -+ /* Disable external debug access */ -+ reg = readl(cpucfg_membase + CPUCFG_DBG_CTL1_REG); -+ writel(reg & ~BIT(cpu), cpucfg_membase + CPUCFG_DBG_CTL1_REG); -+ -+ /* Power up the CPU */ -+ for (i = 0; i <= 8; i++) -+ writel(0xff >> i, prcm_membase + PRCM_CPU_PWR_CLAMP_REG(cpu)); -+ mdelay(10); -+ -+ /* Clear CPU power-off gating */ -+ reg = readl(prcm_membase + PRCM_CPU_PWROFF_REG); -+ writel(reg & ~BIT(cpu), prcm_membase + PRCM_CPU_PWROFF_REG); -+ mdelay(1); -+ -+ /* Deassert the CPU core reset */ -+ writel(3, cpucfg_membase + CPUCFG_CPU_RST_CTRL_REG(cpu)); -+ -+ /* Enable back the external debug accesses */ -+ reg = readl(cpucfg_membase + CPUCFG_DBG_CTL1_REG); -+ writel(reg | BIT(cpu), cpucfg_membase + CPUCFG_DBG_CTL1_REG); -+ -+ spin_unlock(&cpu_lock); -+ -+ return 0; -+} -+ -+struct smp_operations sun6i_smp_ops __initdata = { -+ .smp_prepare_cpus = sun6i_smp_prepare_cpus, -+ .smp_boot_secondary = sun6i_smp_boot_secondary, -+}; ---- a/arch/arm/mach-sunxi/sunxi.c -+++ b/arch/arm/mach-sunxi/sunxi.c -@@ -25,6 +25,8 @@ - #include - #include - -+#include "common.h" -+ - #define SUN4I_WATCHDOG_CTRL_REG 0x00 - #define SUN4I_WATCHDOG_CTRL_RESTART BIT(0) - #define SUN4I_WATCHDOG_MODE_REG 0x04 -@@ -147,6 +149,7 @@ DT_MACHINE_START(SUN6I_DT, "Allwinner su - .init_time = sun6i_timer_init, - .dt_compat = sun6i_board_dt_compat, - .restart = sun6i_restart, -+ .smp = smp_ops(sun6i_smp_ops), - MACHINE_END - - static const char * const sun7i_board_dt_compat[] = { diff --git a/target/linux/sunxi/patches-3.13/109-dt-sun6i-add-reset-ctrler.patch b/target/linux/sunxi/patches-3.13/109-dt-sun6i-add-reset-ctrler.patch deleted file mode 100644 index 05f0056cab..0000000000 --- a/target/linux/sunxi/patches-3.13/109-dt-sun6i-add-reset-ctrler.patch +++ /dev/null @@ -1,90 +0,0 @@ -From f88dc0623908b574d9dcdae8815ccd0829fc6828 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Tue, 24 Sep 2013 11:10:41 +0300 -Subject: [PATCH] ARM: sun6i: Add the reset controller to the DTSI - -The A31 has a reset controller IP that maintains a few other IPs in -reset, among which we can find the UARTs, high speed timers or the I2C. -Now that we have support for them, add the reset controllers to the DTSI. - -Signed-off-by: Maxime Ripard -Acked-by: Philipp Zabel ---- - arch/arm/boot/dts/sun6i-a31.dtsi | 24 ++++++++++++++++++++++++ - 1 file changed, 24 insertions(+) - ---- a/arch/arm/boot/dts/sun6i-a31.dtsi -+++ b/arch/arm/boot/dts/sun6i-a31.dtsi -@@ -212,6 +212,24 @@ - }; - }; - -+ ahb1_rst: reset@01c202c0 { -+ #reset-cells = <1>; -+ compatible = "allwinner,sun6i-a31-ahb1-reset"; -+ reg = <0x01c202c0 0xc>; -+ }; -+ -+ apb1_rst: reset@01c202d0 { -+ #reset-cells = <1>; -+ compatible = "allwinner,sun6i-a31-clock-reset"; -+ reg = <0x01c202d0 0x4>; -+ }; -+ -+ apb2_rst: reset@01c202d8 { -+ #reset-cells = <1>; -+ compatible = "allwinner,sun6i-a31-clock-reset"; -+ reg = <0x01c202d8 0x4>; -+ }; -+ - timer@01c20c00 { - compatible = "allwinner,sun4i-timer"; - reg = <0x01c20c00 0xa0>; -@@ -235,6 +253,7 @@ - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb2_gates 16>; -+ resets = <&apb2_rst 16>; - status = "disabled"; - }; - -@@ -245,6 +264,7 @@ - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb2_gates 17>; -+ resets = <&apb2_rst 17>; - status = "disabled"; - }; - -@@ -255,6 +275,7 @@ - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb2_gates 18>; -+ resets = <&apb2_rst 18>; - status = "disabled"; - }; - -@@ -265,6 +286,7 @@ - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb2_gates 19>; -+ resets = <&apb2_rst 19>; - status = "disabled"; - }; - -@@ -275,6 +297,7 @@ - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb2_gates 20>; -+ resets = <&apb2_rst 20>; - status = "disabled"; - }; - -@@ -285,6 +308,7 @@ - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb2_gates 21>; -+ resets = <&apb2_rst 21>; - status = "disabled"; - }; - diff --git a/target/linux/sunxi/patches-3.13/110-sun4i-clkevent-fill-irqfield.patch b/target/linux/sunxi/patches-3.13/110-sun4i-clkevent-fill-irqfield.patch deleted file mode 100644 index 2445a7888c..0000000000 --- a/target/linux/sunxi/patches-3.13/110-sun4i-clkevent-fill-irqfield.patch +++ /dev/null @@ -1,28 +0,0 @@ -From abc12cd5c39556824cc9022db6eddc64e8e8dbe9 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Wed, 23 Oct 2013 17:54:39 +0100 -Subject: [PATCH] clockevent: sun4i: Fill the irq field in the clockevent - structure - -The clock event structure irq field was not filled previously to the -interrupt we're using. - -This was resulting in the timer not being used at all when using a -configuration with SMP enabled on a system with several CPUs, and with -the cpumask set to the cpu_possible_mask. - -Signed-off-by: Maxime Ripard ---- - drivers/clocksource/sun4i_timer.c | 1 + - 1 file changed, 1 insertion(+) - ---- a/drivers/clocksource/sun4i_timer.c -+++ b/drivers/clocksource/sun4i_timer.c -@@ -191,6 +191,7 @@ static void __init sun4i_timer_init(stru - writel(val | TIMER_IRQ_EN(0), timer_base + TIMER_IRQ_EN_REG); - - sun4i_clockevent.cpumask = cpumask_of(0); -+ sun4i_clockevent.irq = irq; - - clockevents_config_and_register(&sun4i_clockevent, rate, - TIMER_SYNC_TICKS, 0xffffffff); diff --git a/target/linux/sunxi/patches-3.13/111-sun4i-clksrc-change-cpu-mask.patch b/target/linux/sunxi/patches-3.13/111-sun4i-clksrc-change-cpu-mask.patch deleted file mode 100644 index ff80769106..0000000000 --- a/target/linux/sunxi/patches-3.13/111-sun4i-clksrc-change-cpu-mask.patch +++ /dev/null @@ -1,25 +0,0 @@ -From 64a9fa131380f9cef9328d0cf9f2d49a538e6dd2 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Wed, 9 Oct 2013 22:44:56 +0200 -Subject: [PATCH] clocksource: sun4i: change CPU mask to cpu_possible_mask - -The interrupt for the timer is a shared processor interrupt, so any CPU -found in the system can handle it. Switch to our cpumask to -cpu_possible_mask instead of cpumask_of(0). - -Signed-off-by: Maxime Ripard ---- - drivers/clocksource/sun4i_timer.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/clocksource/sun4i_timer.c -+++ b/drivers/clocksource/sun4i_timer.c -@@ -190,7 +190,7 @@ static void __init sun4i_timer_init(stru - val = readl(timer_base + TIMER_IRQ_EN_REG); - writel(val | TIMER_IRQ_EN(0), timer_base + TIMER_IRQ_EN_REG); - -- sun4i_clockevent.cpumask = cpumask_of(0); -+ sun4i_clockevent.cpumask = cpu_possible_mask; - sun4i_clockevent.irq = irq; - - clockevents_config_and_register(&sun4i_clockevent, rate, diff --git a/target/linux/sunxi/patches-3.13/112-sun4i-clksrc-increase-a-bit-in-clockevent.patch b/target/linux/sunxi/patches-3.13/112-sun4i-clksrc-increase-a-bit-in-clockevent.patch deleted file mode 100644 index 9dd7b78595..0000000000 --- a/target/linux/sunxi/patches-3.13/112-sun4i-clksrc-increase-a-bit-in-clockevent.patch +++ /dev/null @@ -1,41 +0,0 @@ -From a4eb936767bd6a63d54734b9ce48932609ce58eb Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Thu, 7 Nov 2013 12:01:48 +0100 -Subject: [PATCH] clocksource: sun4i: Increase a bit the clock event and - sources rating -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -We want to keep this driver as the default provider of the clock events -and source, yet some other driver might fit in the "desired" category of -ratings. Hence, we need to increase a bit the rating so that we can have -more flexibility in the ratings we choose. - -Signed-off-by: Maxime Ripard -Tested-by: Emilio López -Signed-off-by: Daniel Lezcano ---- - drivers/clocksource/sun4i_timer.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/drivers/clocksource/sun4i_timer.c -+++ b/drivers/clocksource/sun4i_timer.c -@@ -114,7 +114,7 @@ static int sun4i_clkevt_next_event(unsig - - static struct clock_event_device sun4i_clockevent = { - .name = "sun4i_tick", -- .rating = 300, -+ .rating = 350, - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .set_mode = sun4i_clkevt_mode, - .set_next_event = sun4i_clkevt_next_event, -@@ -172,7 +172,7 @@ static void __init sun4i_timer_init(stru - - setup_sched_clock(sun4i_timer_sched_read, 32, rate); - clocksource_mmio_init(timer_base + TIMER_CNTVAL_REG(1), node->name, -- rate, 300, 32, clocksource_mmio_readl_down); -+ rate, 350, 32, clocksource_mmio_readl_down); - - ticks_per_jiffy = DIV_ROUND_UP(rate, HZ); - diff --git a/target/linux/sunxi/patches-3.13/113-clk-sunxi-register-factors-clocks.patch b/target/linux/sunxi/patches-3.13/113-clk-sunxi-register-factors-clocks.patch deleted file mode 100644 index 73d0e245a9..0000000000 --- a/target/linux/sunxi/patches-3.13/113-clk-sunxi-register-factors-clocks.patch +++ /dev/null @@ -1,223 +0,0 @@ -From 9212bc4a3752e9a4db2f73afd99278eb28e5dcff Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= -Date: Mon, 23 Dec 2013 00:32:32 -0300 -Subject: [PATCH] clk: sunxi: register factors clocks behind composite -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This commit reworks factors clock registration to be done behind a -composite clock. This allows us to additionally add a gate, mux or -divisors, as it will be needed by some future PLLs. - -Signed-off-by: Emilio López -Acked-by: Maxime Ripard ---- - drivers/clk/sunxi/clk-factors.c | 63 +------------------------------------ - drivers/clk/sunxi/clk-factors.h | 16 +++++----- - drivers/clk/sunxi/clk-sunxi.c | 70 ++++++++++++++++++++++++++++++++++++++--- - 3 files changed, 76 insertions(+), 73 deletions(-) - ---- a/drivers/clk/sunxi/clk-factors.c -+++ b/drivers/clk/sunxi/clk-factors.c -@@ -30,14 +30,6 @@ - * parent - fixed parent. No clk_set_parent support - */ - --struct clk_factors { -- struct clk_hw hw; -- void __iomem *reg; -- struct clk_factors_config *config; -- void (*get_factors) (u32 *rate, u32 parent, u8 *n, u8 *k, u8 *m, u8 *p); -- spinlock_t *lock; --}; -- - #define to_clk_factors(_hw) container_of(_hw, struct clk_factors, hw) - - #define SETMASK(len, pos) (((1U << (len)) - 1) << (pos)) -@@ -120,61 +112,8 @@ static int clk_factors_set_rate(struct c - return 0; - } - --static const struct clk_ops clk_factors_ops = { -+const struct clk_ops clk_factors_ops = { - .recalc_rate = clk_factors_recalc_rate, - .round_rate = clk_factors_round_rate, - .set_rate = clk_factors_set_rate, - }; -- --/** -- * clk_register_factors - register a factors clock with -- * the clock framework -- * @dev: device registering this clock -- * @name: name of this clock -- * @parent_name: name of clock's parent -- * @flags: framework-specific flags -- * @reg: register address to adjust factors -- * @config: shift and width of factors n, k, m and p -- * @get_factors: function to calculate the factors for a given frequency -- * @lock: shared register lock for this clock -- */ --struct clk *clk_register_factors(struct device *dev, const char *name, -- const char *parent_name, -- unsigned long flags, void __iomem *reg, -- struct clk_factors_config *config, -- void (*get_factors)(u32 *rate, u32 parent, -- u8 *n, u8 *k, u8 *m, u8 *p), -- spinlock_t *lock) --{ -- struct clk_factors *factors; -- struct clk *clk; -- struct clk_init_data init; -- -- /* allocate the factors */ -- factors = kzalloc(sizeof(struct clk_factors), GFP_KERNEL); -- if (!factors) { -- pr_err("%s: could not allocate factors clk\n", __func__); -- return ERR_PTR(-ENOMEM); -- } -- -- init.name = name; -- init.ops = &clk_factors_ops; -- init.flags = flags; -- init.parent_names = (parent_name ? &parent_name : NULL); -- init.num_parents = (parent_name ? 1 : 0); -- -- /* struct clk_factors assignments */ -- factors->reg = reg; -- factors->config = config; -- factors->lock = lock; -- factors->hw.init = &init; -- factors->get_factors = get_factors; -- -- /* register the clock */ -- clk = clk_register(dev, &factors->hw); -- -- if (IS_ERR(clk)) -- kfree(factors); -- -- return clk; --} ---- a/drivers/clk/sunxi/clk-factors.h -+++ b/drivers/clk/sunxi/clk-factors.h -@@ -17,11 +17,13 @@ struct clk_factors_config { - u8 pwidth; - }; - --struct clk *clk_register_factors(struct device *dev, const char *name, -- const char *parent_name, -- unsigned long flags, void __iomem *reg, -- struct clk_factors_config *config, -- void (*get_factors) (u32 *rate, u32 parent_rate, -- u8 *n, u8 *k, u8 *m, u8 *p), -- spinlock_t *lock); -+struct clk_factors { -+ struct clk_hw hw; -+ void __iomem *reg; -+ struct clk_factors_config *config; -+ void (*get_factors) (u32 *rate, u32 parent, u8 *n, u8 *k, u8 *m, u8 *p); -+ spinlock_t *lock; -+}; -+ -+extern const struct clk_ops clk_factors_ops; - #endif ---- a/drivers/clk/sunxi/clk-sunxi.c -+++ b/drivers/clk/sunxi/clk-sunxi.c -@@ -23,6 +23,9 @@ - - static DEFINE_SPINLOCK(clk_lock); - -+/* Maximum number of parents our clocks have */ -+#define SUNXI_MAX_PARENTS 5 -+ - /** - * sun4i_osc_clk_setup() - Setup function for gatable oscillator - */ -@@ -261,7 +264,11 @@ static void sun4i_get_apb1_factors(u32 * - * sunxi_factors_clk_setup() - Setup function for factor clocks - */ - -+#define SUNXI_FACTORS_MUX_MASK 0x3 -+ - struct factors_data { -+ int enable; -+ int mux; - struct clk_factors_config *table; - void (*getter) (u32 *rate, u32 parent_rate, u8 *n, u8 *k, u8 *m, u8 *p); - }; -@@ -312,16 +319,71 @@ static void __init sunxi_factors_clk_set - struct factors_data *data) - { - struct clk *clk; -+ struct clk_factors *factors; -+ struct clk_gate *gate = NULL; -+ struct clk_mux *mux = NULL; -+ struct clk_hw *gate_hw = NULL; -+ struct clk_hw *mux_hw = NULL; - const char *clk_name = node->name; -- const char *parent; -+ const char *parents[SUNXI_MAX_PARENTS]; - void *reg; -+ int i = 0; - - reg = of_iomap(node, 0); - -- parent = of_clk_get_parent_name(node, 0); -+ /* if we have a mux, we will have >1 parents */ -+ while (i < SUNXI_MAX_PARENTS && -+ (parents[i] = of_clk_get_parent_name(node, i)) != NULL) -+ i++; -+ -+ factors = kzalloc(sizeof(struct clk_factors), GFP_KERNEL); -+ if (!factors) -+ return; -+ -+ /* Add a gate if this factor clock can be gated */ -+ if (data->enable) { -+ gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL); -+ if (!gate) { -+ kfree(factors); -+ return; -+ } -+ -+ /* set up gate properties */ -+ gate->reg = reg; -+ gate->bit_idx = data->enable; -+ gate->lock = &clk_lock; -+ gate_hw = &gate->hw; -+ } -+ -+ /* Add a mux if this factor clock can be muxed */ -+ if (data->mux) { -+ mux = kzalloc(sizeof(struct clk_mux), GFP_KERNEL); -+ if (!mux) { -+ kfree(factors); -+ kfree(gate); -+ return; -+ } -+ -+ /* set up gate properties */ -+ mux->reg = reg; -+ mux->shift = data->mux; -+ mux->mask = SUNXI_FACTORS_MUX_MASK; -+ mux->lock = &clk_lock; -+ mux_hw = &mux->hw; -+ } - -- clk = clk_register_factors(NULL, clk_name, parent, 0, reg, -- data->table, data->getter, &clk_lock); -+ /* set up factors properties */ -+ factors->reg = reg; -+ factors->config = data->table; -+ factors->get_factors = data->getter; -+ factors->lock = &clk_lock; -+ -+ clk = clk_register_composite(NULL, clk_name, -+ parents, i, -+ mux_hw, &clk_mux_ops, -+ &factors->hw, &clk_factors_ops, -+ gate_hw, &clk_gate_ops, -+ i ? 0 : CLK_IS_ROOT); - - if (!IS_ERR(clk)) { - of_clk_add_provider(node, of_clk_src_simple_get, clk); diff --git a/target/linux/sunxi/patches-3.13/114-clk-sunxi-clean-magic-number.patch b/target/linux/sunxi/patches-3.13/114-clk-sunxi-clean-magic-number.patch deleted file mode 100644 index a3274819f8..0000000000 --- a/target/linux/sunxi/patches-3.13/114-clk-sunxi-clean-magic-number.patch +++ /dev/null @@ -1,35 +0,0 @@ -From 33574f94b0d4d8bc8af732fbcb4f911c3dd8c96b Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= -Date: Mon, 23 Dec 2013 00:32:33 -0300 -Subject: [PATCH] clk: sunxi: clean the magic number of mux parents -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This was pointed out during the review of the factor patches. Let's -indicate what does that magic 5 mean. - -Signed-off-by: Emilio López ---- - drivers/clk/sunxi/clk-sunxi.c | 5 +++-- - 1 file changed, 3 insertions(+), 2 deletions(-) - ---- a/drivers/clk/sunxi/clk-sunxi.c -+++ b/drivers/clk/sunxi/clk-sunxi.c -@@ -420,13 +420,14 @@ static void __init sunxi_mux_clk_setup(s - { - struct clk *clk; - const char *clk_name = node->name; -- const char *parents[5]; -+ const char *parents[SUNXI_MAX_PARENTS]; - void *reg; - int i = 0; - - reg = of_iomap(node, 0); - -- while (i < 5 && (parents[i] = of_clk_get_parent_name(node, i)) != NULL) -+ while (i < SUNXI_MAX_PARENTS && -+ (parents[i] = of_clk_get_parent_name(node, i)) != NULL) - i++; - - clk = clk_register_mux(NULL, clk_name, parents, i, diff --git a/target/linux/sunxi/patches-3.13/115-clk-sunxi_add-gating-pll1.patch b/target/linux/sunxi/patches-3.13/115-clk-sunxi_add-gating-pll1.patch deleted file mode 100644 index 6b63000e6a..0000000000 --- a/target/linux/sunxi/patches-3.13/115-clk-sunxi_add-gating-pll1.patch +++ /dev/null @@ -1,46 +0,0 @@ -From 3d56b9643ff9fff3c7ceb095e03f4ab7e149b9ce Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= -Date: Mon, 23 Dec 2013 00:32:34 -0300 -Subject: [PATCH] clk: sunxi: add gating support to PLL1 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This commit adds gating support to PLL1 on the clock driver. This makes -the PLL1 implementation fully compatible with PLL4 as well. - -Signed-off-by: Emilio López -Acked-by: Maxime Ripard -Acked-by: Mike Turquette ---- - Documentation/devicetree/bindings/clock/sunxi.txt | 2 +- - drivers/clk/sunxi/clk-sunxi.c | 2 ++ - 2 files changed, 3 insertions(+), 1 deletion(-) - ---- a/Documentation/devicetree/bindings/clock/sunxi.txt -+++ b/Documentation/devicetree/bindings/clock/sunxi.txt -@@ -7,7 +7,7 @@ This binding uses the common clock bindi - Required properties: - - compatible : shall be one of the following: - "allwinner,sun4i-osc-clk" - for a gatable oscillator -- "allwinner,sun4i-pll1-clk" - for the main PLL clock -+ "allwinner,sun4i-pll1-clk" - for the main PLL clock and PLL4 - "allwinner,sun6i-a31-pll1-clk" - for the main PLL clock on A31 - "allwinner,sun4i-cpu-clk" - for the CPU multiplexer clock - "allwinner,sun4i-axi-clk" - for the AXI clock ---- a/drivers/clk/sunxi/clk-sunxi.c -+++ b/drivers/clk/sunxi/clk-sunxi.c -@@ -301,11 +301,13 @@ static struct clk_factors_config sun4i_a - }; - - static const struct factors_data sun4i_pll1_data __initconst = { -+ .enable = 31, - .table = &sun4i_pll1_config, - .getter = sun4i_get_pll1_factors, - }; - - static const struct factors_data sun6i_a31_pll1_data __initconst = { -+ .enable = 31, - .table = &sun6i_a31_pll1_config, - .getter = sun6i_a31_get_pll1_factors, - }; diff --git a/target/linux/sunxi/patches-3.13/116-clk-sunxi-add-pll4.patch b/target/linux/sunxi/patches-3.13/116-clk-sunxi-add-pll4.patch deleted file mode 100644 index 147c209ade..0000000000 --- a/target/linux/sunxi/patches-3.13/116-clk-sunxi-add-pll4.patch +++ /dev/null @@ -1,84 +0,0 @@ -From ff0b5fdb65bc7f10af7e83bb0919cb6bec2dc624 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= -Date: Mon, 23 Dec 2013 00:32:35 -0300 -Subject: [PATCH] ARM: sunxi: add PLL4 support -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This commit adds the PLL4 definition to the sun4i, sun5i and sun7i -device trees. PLL4 is compatible with PLL1. - -Signed-off-by: Emilio López -Acked-by: Maxime Ripard ---- - arch/arm/boot/dts/sun4i-a10.dtsi | 7 +++++++ - arch/arm/boot/dts/sun5i-a10s.dtsi | 7 +++++++ - arch/arm/boot/dts/sun5i-a13.dtsi | 7 +++++++ - arch/arm/boot/dts/sun7i-a20.dtsi | 7 +++++++ - 4 files changed, 28 insertions(+) - ---- a/arch/arm/boot/dts/sun4i-a10.dtsi -+++ b/arch/arm/boot/dts/sun4i-a10.dtsi -@@ -66,6 +66,13 @@ - clocks = <&osc24M>; - }; - -+ pll4: pll4@01c20018 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-pll1-clk"; -+ reg = <0x01c20018 0x4>; -+ clocks = <&osc24M>; -+ }; -+ - /* dummy is 200M */ - cpu: cpu@01c20054 { - #clock-cells = <0>; ---- a/arch/arm/boot/dts/sun5i-a10s.dtsi -+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi -@@ -63,6 +63,13 @@ - clocks = <&osc24M>; - }; - -+ pll4: pll4@01c20018 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-pll1-clk"; -+ reg = <0x01c20018 0x4>; -+ clocks = <&osc24M>; -+ }; -+ - /* dummy is 200M */ - cpu: cpu@01c20054 { - #clock-cells = <0>; ---- a/arch/arm/boot/dts/sun5i-a13.dtsi -+++ b/arch/arm/boot/dts/sun5i-a13.dtsi -@@ -67,6 +67,13 @@ - clocks = <&osc24M>; - }; - -+ pll4: pll4@01c20018 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-pll1-clk"; -+ reg = <0x01c20018 0x4>; -+ clocks = <&osc24M>; -+ }; -+ - /* dummy is 200M */ - cpu: cpu@01c20054 { - #clock-cells = <0>; ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -62,6 +62,13 @@ - clocks = <&osc24M>; - }; - -+ pll4: pll4@01c20018 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-pll1-clk"; -+ reg = <0x01c20018 0x4>; -+ clocks = <&osc24M>; -+ }; -+ - /* - * This is a dummy clock, to be used as placeholder on - * other mux clocks when a specific parent clock is not diff --git a/target/linux/sunxi/patches-3.13/117-clk-sunxi-factors_clk_setup_update.patch b/target/linux/sunxi/patches-3.13/117-clk-sunxi-factors_clk_setup_update.patch deleted file mode 100644 index 8feab5b9bc..0000000000 --- a/target/linux/sunxi/patches-3.13/117-clk-sunxi-factors_clk_setup_update.patch +++ /dev/null @@ -1,74 +0,0 @@ -From 8a3282a0a185108e37e7a48437b58d956ff56f4a Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= -Date: Mon, 23 Dec 2013 00:32:36 -0300 -Subject: [PATCH] clk: sunxi: make factors_clk_setup return the clock it - registers -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -We will be needing this to register a factor clock as parent with leaf -divisors on a single call. - -Signed-off-by: Emilio López -Acked-by: Mike Turquette ---- - drivers/clk/sunxi/clk-sunxi.c | 15 ++++++++------- - 1 file changed, 8 insertions(+), 7 deletions(-) - ---- a/drivers/clk/sunxi/clk-sunxi.c -+++ b/drivers/clk/sunxi/clk-sunxi.c -@@ -317,8 +317,8 @@ static const struct factors_data sun4i_a - .getter = sun4i_get_apb1_factors, - }; - --static void __init sunxi_factors_clk_setup(struct device_node *node, -- struct factors_data *data) -+static struct clk * __init sunxi_factors_clk_setup(struct device_node *node, -+ const struct factors_data *data) - { - struct clk *clk; - struct clk_factors *factors; -@@ -340,14 +340,14 @@ static void __init sunxi_factors_clk_set - - factors = kzalloc(sizeof(struct clk_factors), GFP_KERNEL); - if (!factors) -- return; -+ return NULL; - - /* Add a gate if this factor clock can be gated */ - if (data->enable) { - gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL); - if (!gate) { - kfree(factors); -- return; -+ return NULL; - } - - /* set up gate properties */ -@@ -363,7 +363,7 @@ static void __init sunxi_factors_clk_set - if (!mux) { - kfree(factors); - kfree(gate); -- return; -+ return NULL; - } - - /* set up gate properties */ -@@ -384,13 +384,14 @@ static void __init sunxi_factors_clk_set - parents, i, - mux_hw, &clk_mux_ops, - &factors->hw, &clk_factors_ops, -- gate_hw, &clk_gate_ops, -- i ? 0 : CLK_IS_ROOT); -+ gate_hw, &clk_gate_ops, 0); - - if (!IS_ERR(clk)) { - of_clk_add_provider(node, of_clk_src_simple_get, clk); - clk_register_clkdev(clk, clk_name, NULL); - } -+ -+ return clk; - } - - diff --git a/target/linux/sunxi/patches-3.13/118-clk-sunxi-add-pll5-pll6.patch b/target/linux/sunxi/patches-3.13/118-clk-sunxi-add-pll5-pll6.patch deleted file mode 100644 index 6cff37f78c..0000000000 --- a/target/linux/sunxi/patches-3.13/118-clk-sunxi-add-pll5-pll6.patch +++ /dev/null @@ -1,303 +0,0 @@ -From 655893a197a5134a371a5c6b579f1bbce03ab413 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= -Date: Mon, 23 Dec 2013 00:32:37 -0300 -Subject: [PATCH] clk: sunxi: add PLL5 and PLL6 support -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This commit implements PLL5 and PLL6 support on the sunxi clock driver. -These PLLs use a similar factor clock, but differ on their outputs. - -Signed-off-by: Emilio López -Acked-by: Mike Turquette ---- - Documentation/devicetree/bindings/clock/sunxi.txt | 2 + - drivers/clk/sunxi/clk-sunxi.c | 230 ++++++++++++++++++++++ - 2 files changed, 232 insertions(+) - ---- a/Documentation/devicetree/bindings/clock/sunxi.txt -+++ b/Documentation/devicetree/bindings/clock/sunxi.txt -@@ -9,6 +9,8 @@ Required properties: - "allwinner,sun4i-osc-clk" - for a gatable oscillator - "allwinner,sun4i-pll1-clk" - for the main PLL clock and PLL4 - "allwinner,sun6i-a31-pll1-clk" - for the main PLL clock on A31 -+ "allwinner,sun4i-pll5-clk" - for the PLL5 clock -+ "allwinner,sun4i-pll6-clk" - for the PLL6 clock - "allwinner,sun4i-cpu-clk" - for the CPU multiplexer clock - "allwinner,sun4i-axi-clk" - for the AXI clock - "allwinner,sun4i-axi-gates-clk" - for the AXI gates ---- a/drivers/clk/sunxi/clk-sunxi.c -+++ b/drivers/clk/sunxi/clk-sunxi.c -@@ -218,6 +218,40 @@ static void sun6i_a31_get_pll1_factors(u - } - - /** -+ * sun4i_get_pll5_factors() - calculates n, k factors for PLL5 -+ * PLL5 rate is calculated as follows -+ * rate = parent_rate * n * (k + 1) -+ * parent_rate is always 24Mhz -+ */ -+ -+static void sun4i_get_pll5_factors(u32 *freq, u32 parent_rate, -+ u8 *n, u8 *k, u8 *m, u8 *p) -+{ -+ u8 div; -+ -+ /* Normalize value to a parent_rate multiple (24M) */ -+ div = *freq / parent_rate; -+ *freq = parent_rate * div; -+ -+ /* we were called to round the frequency, we can now return */ -+ if (n == NULL) -+ return; -+ -+ if (div < 31) -+ *k = 0; -+ else if (div / 2 < 31) -+ *k = 1; -+ else if (div / 3 < 31) -+ *k = 2; -+ else -+ *k = 3; -+ -+ *n = DIV_ROUND_UP(div, (*k+1)); -+} -+ -+ -+ -+/** - * sun4i_get_apb1_factors() - calculates m, p factors for APB1 - * APB1 rate is calculated as follows - * rate = (parent_rate >> p) / (m + 1); -@@ -293,6 +327,13 @@ static struct clk_factors_config sun6i_a - .mwidth = 2, - }; - -+static struct clk_factors_config sun4i_pll5_config = { -+ .nshift = 8, -+ .nwidth = 5, -+ .kshift = 4, -+ .kwidth = 2, -+}; -+ - static struct clk_factors_config sun4i_apb1_config = { - .mshift = 0, - .mwidth = 5, -@@ -312,6 +353,12 @@ static const struct factors_data sun6i_a - .getter = sun6i_a31_get_pll1_factors, - }; - -+static const struct factors_data sun4i_pll5_data __initconst = { -+ .enable = 31, -+ .table = &sun4i_pll5_config, -+ .getter = sun4i_get_pll5_factors, -+}; -+ - static const struct factors_data sun4i_apb1_data __initconst = { - .table = &sun4i_apb1_config, - .getter = sun4i_get_apb1_factors, -@@ -627,6 +674,179 @@ static void __init sunxi_gates_clk_setup - of_clk_add_provider(node, of_clk_src_onecell_get, clk_data); - } - -+ -+ -+/** -+ * sunxi_divs_clk_setup() helper data -+ */ -+ -+#define SUNXI_DIVS_MAX_QTY 2 -+#define SUNXI_DIVISOR_WIDTH 2 -+ -+struct divs_data { -+ const struct factors_data *factors; /* data for the factor clock */ -+ struct { -+ u8 fixed; /* is it a fixed divisor? if not... */ -+ struct clk_div_table *table; /* is it a table based divisor? */ -+ u8 shift; /* otherwise it's a normal divisor with this shift */ -+ u8 pow; /* is it power-of-two based? */ -+ u8 gate; /* is it independently gateable? */ -+ } div[SUNXI_DIVS_MAX_QTY]; -+}; -+ -+static struct clk_div_table pll6_sata_tbl[] = { -+ { .val = 0, .div = 6, }, -+ { .val = 1, .div = 12, }, -+ { .val = 2, .div = 18, }, -+ { .val = 3, .div = 24, }, -+ { } /* sentinel */ -+}; -+ -+static const struct divs_data pll5_divs_data __initconst = { -+ .factors = &sun4i_pll5_data, -+ .div = { -+ { .shift = 0, .pow = 0, }, /* M, DDR */ -+ { .shift = 16, .pow = 1, }, /* P, other */ -+ } -+}; -+ -+static const struct divs_data pll6_divs_data __initconst = { -+ .factors = &sun4i_pll5_data, -+ .div = { -+ { .shift = 0, .table = pll6_sata_tbl, .gate = 14 }, /* M, SATA */ -+ { .fixed = 2 }, /* P, other */ -+ } -+}; -+ -+/** -+ * sunxi_divs_clk_setup() - Setup function for leaf divisors on clocks -+ * -+ * These clocks look something like this -+ * ________________________ -+ * | ___divisor 1---|----> to consumer -+ * parent >--| pll___/___divisor 2---|----> to consumer -+ * | \_______________|____> to consumer -+ * |________________________| -+ */ -+ -+static void __init sunxi_divs_clk_setup(struct device_node *node, -+ struct divs_data *data) -+{ -+ struct clk_onecell_data *clk_data; -+ const char *parent = node->name; -+ const char *clk_name; -+ struct clk **clks, *pclk; -+ struct clk_hw *gate_hw, *rate_hw; -+ const struct clk_ops *rate_ops; -+ struct clk_gate *gate = NULL; -+ struct clk_fixed_factor *fix_factor; -+ struct clk_divider *divider; -+ void *reg; -+ int i = 0; -+ int flags, clkflags; -+ -+ /* Set up factor clock that we will be dividing */ -+ pclk = sunxi_factors_clk_setup(node, data->factors); -+ -+ reg = of_iomap(node, 0); -+ -+ clk_data = kmalloc(sizeof(struct clk_onecell_data), GFP_KERNEL); -+ if (!clk_data) -+ return; -+ -+ clks = kzalloc(SUNXI_DIVS_MAX_QTY * sizeof(struct clk *), GFP_KERNEL); -+ if (!clks) -+ goto free_clkdata; -+ -+ clk_data->clks = clks; -+ -+ /* It's not a good idea to have automatic reparenting changing -+ * our RAM clock! */ -+ clkflags = !strcmp("pll5", parent) ? 0 : CLK_SET_RATE_PARENT; -+ -+ for (i = 0; i < SUNXI_DIVS_MAX_QTY; i++) { -+ if (of_property_read_string_index(node, "clock-output-names", -+ i, &clk_name) != 0) -+ break; -+ -+ gate_hw = NULL; -+ rate_hw = NULL; -+ rate_ops = NULL; -+ -+ /* If this leaf clock can be gated, create a gate */ -+ if (data->div[i].gate) { -+ gate = kzalloc(sizeof(*gate), GFP_KERNEL); -+ if (!gate) -+ goto free_clks; -+ -+ gate->reg = reg; -+ gate->bit_idx = data->div[i].gate; -+ gate->lock = &clk_lock; -+ -+ gate_hw = &gate->hw; -+ } -+ -+ /* Leaves can be fixed or configurable divisors */ -+ if (data->div[i].fixed) { -+ fix_factor = kzalloc(sizeof(*fix_factor), GFP_KERNEL); -+ if (!fix_factor) -+ goto free_gate; -+ -+ fix_factor->mult = 1; -+ fix_factor->div = data->div[i].fixed; -+ -+ rate_hw = &fix_factor->hw; -+ rate_ops = &clk_fixed_factor_ops; -+ } else { -+ divider = kzalloc(sizeof(*divider), GFP_KERNEL); -+ if (!divider) -+ goto free_gate; -+ -+ flags = data->div[i].pow ? CLK_DIVIDER_POWER_OF_TWO : 0; -+ -+ divider->reg = reg; -+ divider->shift = data->div[i].shift; -+ divider->width = SUNXI_DIVISOR_WIDTH; -+ divider->flags = flags; -+ divider->lock = &clk_lock; -+ divider->table = data->div[i].table; -+ -+ rate_hw = ÷r->hw; -+ rate_ops = &clk_divider_ops; -+ } -+ -+ /* Wrap the (potential) gate and the divisor on a composite -+ * clock to unify them */ -+ clks[i] = clk_register_composite(NULL, clk_name, &parent, 1, -+ NULL, NULL, -+ rate_hw, rate_ops, -+ gate_hw, &clk_gate_ops, -+ clkflags); -+ -+ WARN_ON(IS_ERR(clk_data->clks[i])); -+ clk_register_clkdev(clks[i], clk_name, NULL); -+ } -+ -+ /* The last clock available on the getter is the parent */ -+ clks[i++] = pclk; -+ -+ /* Adjust to the real max */ -+ clk_data->clk_num = i; -+ -+ of_clk_add_provider(node, of_clk_src_onecell_get, clk_data); -+ -+ return; -+ -+free_gate: -+ kfree(gate); -+free_clks: -+ kfree(clks); -+free_clkdata: -+ kfree(clk_data); -+} -+ -+ -+ - /* Matches for factors clocks */ - static const struct of_device_id clk_factors_match[] __initconst = { - {.compatible = "allwinner,sun4i-pll1-clk", .data = &sun4i_pll1_data,}, -@@ -644,6 +864,13 @@ static const struct of_device_id clk_div - {} - }; - -+/* Matches for divided outputs */ -+static const struct of_device_id clk_divs_match[] __initconst = { -+ {.compatible = "allwinner,sun4i-pll5-clk", .data = &pll5_divs_data,}, -+ {.compatible = "allwinner,sun4i-pll6-clk", .data = &pll6_divs_data,}, -+ {} -+}; -+ - /* Matches for mux clocks */ - static const struct of_device_id clk_mux_match[] __initconst = { - {.compatible = "allwinner,sun4i-cpu-clk", .data = &sun4i_cpu_mux_data,}, -@@ -721,6 +948,9 @@ static void __init sunxi_init_clocks(str - /* Register divider clocks */ - of_sunxi_table_clock_setup(clk_div_match, sunxi_divider_clk_setup); - -+ /* Register divided output clocks */ -+ of_sunxi_table_clock_setup(clk_divs_match, sunxi_divs_clk_setup); -+ - /* Register mux clocks */ - of_sunxi_table_clock_setup(clk_mux_match, sunxi_mux_clk_setup); - diff --git a/target/linux/sunxi/patches-3.13/119-dt-sunxi-add-pll5-pll6.patch b/target/linux/sunxi/patches-3.13/119-dt-sunxi-add-pll5-pll6.patch deleted file mode 100644 index db0020e2f4..0000000000 --- a/target/linux/sunxi/patches-3.13/119-dt-sunxi-add-pll5-pll6.patch +++ /dev/null @@ -1,187 +0,0 @@ -From 6d3ca59232090bff1b5e1abfd3417a3859e47425 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= -Date: Mon, 23 Dec 2013 00:32:38 -0300 -Subject: [PATCH] ARM: sunxi: add PLL5 and PLL6 support -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This commit adds PLL5 and PLL6 nodes to the sun4i, sun5i and sun7i -device trees. - -Signed-off-by: Emilio López -Acked-by: Maxime Ripard ---- - arch/arm/boot/dts/sun4i-a10.dtsi | 19 +++++++++++++++++-- - arch/arm/boot/dts/sun5i-a10s.dtsi | 19 +++++++++++++++++-- - arch/arm/boot/dts/sun5i-a13.dtsi | 19 +++++++++++++++++-- - arch/arm/boot/dts/sun7i-a20.dtsi | 28 ++++++++++++++++------------ - 4 files changed, 67 insertions(+), 18 deletions(-) - ---- a/arch/arm/boot/dts/sun4i-a10.dtsi -+++ b/arch/arm/boot/dts/sun4i-a10.dtsi -@@ -73,6 +73,22 @@ - clocks = <&osc24M>; - }; - -+ pll5: pll5@01c20020 { -+ #clock-cells = <1>; -+ compatible = "allwinner,sun4i-pll5-clk"; -+ reg = <0x01c20020 0x4>; -+ clocks = <&osc24M>; -+ clock-output-names = "pll5_ddr", "pll5_other"; -+ }; -+ -+ pll6: pll6@01c20028 { -+ #clock-cells = <1>; -+ compatible = "allwinner,sun4i-pll6-clk"; -+ reg = <0x01c20028 0x4>; -+ clocks = <&osc24M>; -+ clock-output-names = "pll6_sata", "pll6_other", "pll6"; -+ }; -+ - /* dummy is 200M */ - cpu: cpu@01c20054 { - #clock-cells = <0>; -@@ -138,12 +154,11 @@ - "apb0_ir1", "apb0_keypad"; - }; - -- /* dummy is pll62 */ - apb1_mux: apb1_mux@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-apb1-mux-clk"; - reg = <0x01c20058 0x4>; -- clocks = <&osc24M>, <&dummy>, <&osc32k>; -+ clocks = <&osc24M>, <&pll6 1>, <&osc32k>; - }; - - apb1: apb1@01c20058 { ---- a/arch/arm/boot/dts/sun5i-a10s.dtsi -+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi -@@ -70,6 +70,22 @@ - clocks = <&osc24M>; - }; - -+ pll5: pll5@01c20020 { -+ #clock-cells = <1>; -+ compatible = "allwinner,sun4i-pll5-clk"; -+ reg = <0x01c20020 0x4>; -+ clocks = <&osc24M>; -+ clock-output-names = "pll5_ddr", "pll5_other"; -+ }; -+ -+ pll6: pll6@01c20028 { -+ #clock-cells = <1>; -+ compatible = "allwinner,sun4i-pll6-clk"; -+ reg = <0x01c20028 0x4>; -+ clocks = <&osc24M>; -+ clock-output-names = "pll6_sata", "pll6_other", "pll6"; -+ }; -+ - /* dummy is 200M */ - cpu: cpu@01c20054 { - #clock-cells = <0>; -@@ -130,12 +146,11 @@ - "apb0_ir", "apb0_keypad"; - }; - -- /* dummy is pll62 */ - apb1_mux: apb1_mux@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-apb1-mux-clk"; - reg = <0x01c20058 0x4>; -- clocks = <&osc24M>, <&dummy>, <&osc32k>; -+ clocks = <&osc24M>, <&pll6 1>, <&osc32k>; - }; - - apb1: apb1@01c20058 { ---- a/arch/arm/boot/dts/sun5i-a13.dtsi -+++ b/arch/arm/boot/dts/sun5i-a13.dtsi -@@ -74,6 +74,22 @@ - clocks = <&osc24M>; - }; - -+ pll5: pll5@01c20020 { -+ #clock-cells = <1>; -+ compatible = "allwinner,sun4i-pll5-clk"; -+ reg = <0x01c20020 0x4>; -+ clocks = <&osc24M>; -+ clock-output-names = "pll5_ddr", "pll5_other"; -+ }; -+ -+ pll6: pll6@01c20028 { -+ #clock-cells = <1>; -+ compatible = "allwinner,sun4i-pll6-clk"; -+ reg = <0x01c20028 0x4>; -+ clocks = <&osc24M>; -+ clock-output-names = "pll6_sata", "pll6_other", "pll6"; -+ }; -+ - /* dummy is 200M */ - cpu: cpu@01c20054 { - #clock-cells = <0>; -@@ -132,12 +148,11 @@ - clock-output-names = "apb0_codec", "apb0_pio", "apb0_ir"; - }; - -- /* dummy is pll6 */ - apb1_mux: apb1_mux@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-apb1-mux-clk"; - reg = <0x01c20058 0x4>; -- clocks = <&osc24M>, <&dummy>, <&osc32k>; -+ clocks = <&osc24M>, <&pll6 1>, <&osc32k>; - }; - - apb1: apb1@01c20058 { ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -69,23 +69,27 @@ - clocks = <&osc24M>; - }; - -- /* -- * This is a dummy clock, to be used as placeholder on -- * other mux clocks when a specific parent clock is not -- * yet implemented. It should be dropped when the driver -- * is complete. -- */ -- pll6: pll6 { -- #clock-cells = <0>; -- compatible = "fixed-clock"; -- clock-frequency = <0>; -+ pll5: pll5@01c20020 { -+ #clock-cells = <1>; -+ compatible = "allwinner,sun4i-pll5-clk"; -+ reg = <0x01c20020 0x4>; -+ clocks = <&osc24M>; -+ clock-output-names = "pll5_ddr", "pll5_other"; -+ }; -+ -+ pll6: pll6@01c20028 { -+ #clock-cells = <1>; -+ compatible = "allwinner,sun4i-pll6-clk"; -+ reg = <0x01c20028 0x4>; -+ clocks = <&osc24M>; -+ clock-output-names = "pll6_sata", "pll6_other", "pll6"; - }; - - cpu: cpu@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-cpu-clk"; - reg = <0x01c20054 0x4>; -- clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll6>; -+ clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll6 1>; - }; - - axi: axi@01c20054 { -@@ -144,7 +148,7 @@ - #clock-cells = <0>; - compatible = "allwinner,sun4i-apb1-mux-clk"; - reg = <0x01c20058 0x4>; -- clocks = <&osc24M>, <&pll6>, <&osc32k>; -+ clocks = <&osc24M>, <&pll6 1>, <&osc32k>; - }; - - apb1: apb1@01c20058 { diff --git a/target/linux/sunxi/patches-3.13/120-clk-sunxi-mod0.patch b/target/linux/sunxi/patches-3.13/120-clk-sunxi-mod0.patch deleted file mode 100644 index 8432c3c1fc..0000000000 --- a/target/linux/sunxi/patches-3.13/120-clk-sunxi-mod0.patch +++ /dev/null @@ -1,122 +0,0 @@ -From bdc913d1ef5143a8728ae414fcb90f9ed87a58da Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= -Date: Mon, 23 Dec 2013 00:32:39 -0300 -Subject: [PATCH] clk: sunxi: mod0 support -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This commit implements support for the "module 0" type of clocks, as -used by MMC, IR, NAND, SATA and other components. - -Signed-off-by: Emilio López -Acked-by: Mike Turquette ---- - Documentation/devicetree/bindings/clock/sunxi.txt | 5 +- - drivers/clk/sunxi/clk-sunxi.c | 57 +++++++++++++++++++++++ - 2 files changed, 61 insertions(+), 1 deletion(-) - ---- a/Documentation/devicetree/bindings/clock/sunxi.txt -+++ b/Documentation/devicetree/bindings/clock/sunxi.txt -@@ -35,10 +35,13 @@ Required properties: - "allwinner,sun7i-a20-apb1-gates-clk" - for the APB1 gates on A20 - "allwinner,sun6i-a31-apb2-div-clk" - for the APB2 gates on A31 - "allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31 -+ "allwinner,sun4i-mod0-clk" - for the module 0 family of clocks - - Required properties for all clocks: - - reg : shall be the control register address for the clock. --- clocks : shall be the input parent clock(s) phandle for the clock -+- clocks : shall be the input parent clock(s) phandle for the clock. For -+ multiplexed clocks, the list order must match the hardware -+ programming order. - - #clock-cells : from common clock binding; shall be set to 0 except for - "allwinner,*-gates-clk" where it shall be set to 1 - ---- a/drivers/clk/sunxi/clk-sunxi.c -+++ b/drivers/clk/sunxi/clk-sunxi.c -@@ -295,6 +295,47 @@ static void sun4i_get_apb1_factors(u32 * - - - /** -+ * sun4i_get_mod0_factors() - calculates m, n factors for MOD0-style clocks -+ * MMC rate is calculated as follows -+ * rate = (parent_rate >> p) / (m + 1); -+ */ -+ -+static void sun4i_get_mod0_factors(u32 *freq, u32 parent_rate, -+ u8 *n, u8 *k, u8 *m, u8 *p) -+{ -+ u8 div, calcm, calcp; -+ -+ /* These clocks can only divide, so we will never be able to achieve -+ * frequencies higher than the parent frequency */ -+ if (*freq > parent_rate) -+ *freq = parent_rate; -+ -+ div = parent_rate / *freq; -+ -+ if (div < 16) -+ calcp = 0; -+ else if (div / 2 < 16) -+ calcp = 1; -+ else if (div / 4 < 16) -+ calcp = 2; -+ else -+ calcp = 3; -+ -+ calcm = DIV_ROUND_UP(div, 1 << calcp); -+ -+ *freq = (parent_rate >> calcp) / calcm; -+ -+ /* we were called to round the frequency, we can now return */ -+ if (n == NULL) -+ return; -+ -+ *m = calcm - 1; -+ *p = calcp; -+} -+ -+ -+ -+/** - * sunxi_factors_clk_setup() - Setup function for factor clocks - */ - -@@ -341,6 +382,14 @@ static struct clk_factors_config sun4i_a - .pwidth = 2, - }; - -+/* user manual says "n" but it's really "p" */ -+static struct clk_factors_config sun4i_mod0_config = { -+ .mshift = 0, -+ .mwidth = 4, -+ .pshift = 16, -+ .pwidth = 2, -+}; -+ - static const struct factors_data sun4i_pll1_data __initconst = { - .enable = 31, - .table = &sun4i_pll1_config, -@@ -364,6 +413,13 @@ static const struct factors_data sun4i_a - .getter = sun4i_get_apb1_factors, - }; - -+static const struct factors_data sun4i_mod0_data __initconst = { -+ .enable = 31, -+ .mux = 24, -+ .table = &sun4i_mod0_config, -+ .getter = sun4i_get_mod0_factors, -+}; -+ - static struct clk * __init sunxi_factors_clk_setup(struct device_node *node, - const struct factors_data *data) - { -@@ -852,6 +908,7 @@ static const struct of_device_id clk_fac - {.compatible = "allwinner,sun4i-pll1-clk", .data = &sun4i_pll1_data,}, - {.compatible = "allwinner,sun6i-a31-pll1-clk", .data = &sun6i_a31_pll1_data,}, - {.compatible = "allwinner,sun4i-apb1-clk", .data = &sun4i_apb1_data,}, -+ {.compatible = "allwinner,sun4i-mod0-clk", .data = &sun4i_mod0_data,}, - {} - }; - diff --git a/target/linux/sunxi/patches-3.13/121-clk-sunxi-better-factor-dt-nodes.patch b/target/linux/sunxi/patches-3.13/121-clk-sunxi-better-factor-dt-nodes.patch deleted file mode 100644 index 5f4d738ccd..0000000000 --- a/target/linux/sunxi/patches-3.13/121-clk-sunxi-better-factor-dt-nodes.patch +++ /dev/null @@ -1,47 +0,0 @@ -From 7d47b009bf287bf5e0817f47c40e32b7ec0e8151 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= -Date: Mon, 23 Dec 2013 00:32:40 -0300 -Subject: [PATCH] clk: sunxi: support better factor DT nodes -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -The DT nodes should look like - - abc_clk: clk@deadbeef { - ... - clock-output-names = "abc"; - } - -But our old DT nodes look like - - abc: abc@deadbeef { - ... - } - -So, let's support both formats, until we can transition everything -to the new, correct one. - -Signed-off-by: Emilio López ---- - drivers/clk/sunxi/clk-sunxi.c | 9 +++++++++ - 1 file changed, 9 insertions(+) - ---- a/drivers/clk/sunxi/clk-sunxi.c -+++ b/drivers/clk/sunxi/clk-sunxi.c -@@ -441,6 +441,15 @@ static struct clk * __init sunxi_factors - (parents[i] = of_clk_get_parent_name(node, i)) != NULL) - i++; - -+ /* Nodes should be providing the name via clock-output-names -+ * but originally our dts didn't, and so we used node->name. -+ * The new, better nodes look like clk@deadbeef, so we pull the -+ * name just in this case */ -+ if (!strcmp("clk", clk_name)) { -+ of_property_read_string_index(node, "clock-output-names", -+ 0, &clk_name); -+ } -+ - factors = kzalloc(sizeof(struct clk_factors), GFP_KERNEL); - if (!factors) - return NULL; diff --git a/target/linux/sunxi/patches-3.13/122-1-dt-sun4i-add-mod0.patch b/target/linux/sunxi/patches-3.13/122-1-dt-sun4i-add-mod0.patch deleted file mode 100644 index f0112bbef4..0000000000 --- a/target/linux/sunxi/patches-3.13/122-1-dt-sun4i-add-mod0.patch +++ /dev/null @@ -1,145 +0,0 @@ -From dda274b6f95902b619af1fb14f26e231bb420371 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= -Date: Mon, 23 Dec 2013 00:32:41 -0300 -Subject: [PATCH] ARM: sun4i: dt: mod0 clocks -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This commit adds all the mod0 clocks present on sun4i to its device tree - -Signed-off-by: Emilio López -Acked-by: Maxime Ripard ---- - arch/arm/boot/dts/sun4i-a10.dtsi | 120 +++++++++++++++++++++++++++++++++++++++ - 1 file changed, 120 insertions(+) - ---- a/arch/arm/boot/dts/sun4i-a10.dtsi -+++ b/arch/arm/boot/dts/sun4i-a10.dtsi -@@ -180,6 +180,126 @@ - "apb1_uart4", "apb1_uart5", "apb1_uart6", - "apb1_uart7"; - }; -+ -+ nand_clk: clk@01c20080 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c20080 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "nand"; -+ }; -+ -+ ms_clk: clk@01c20084 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c20084 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "ms"; -+ }; -+ -+ mmc0_clk: clk@01c20088 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c20088 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "mmc0"; -+ }; -+ -+ mmc1_clk: clk@01c2008c { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c2008c 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "mmc1"; -+ }; -+ -+ mmc2_clk: clk@01c20090 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c20090 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "mmc2"; -+ }; -+ -+ mmc3_clk: clk@01c20094 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c20094 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "mmc3"; -+ }; -+ -+ ts_clk: clk@01c20098 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c20098 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "ts"; -+ }; -+ -+ ss_clk: clk@01c2009c { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c2009c 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "ss"; -+ }; -+ -+ spi0_clk: clk@01c200a0 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c200a0 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "spi0"; -+ }; -+ -+ spi1_clk: clk@01c200a4 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c200a4 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "spi1"; -+ }; -+ -+ spi2_clk: clk@01c200a8 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c200a8 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "spi2"; -+ }; -+ -+ pata_clk: clk@01c200ac { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c200ac 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "pata"; -+ }; -+ -+ ir0_clk: clk@01c200b0 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c200b0 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "ir0"; -+ }; -+ -+ ir1_clk: clk@01c200b4 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c200b4 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "ir1"; -+ }; -+ -+ spi3_clk: clk@01c200d4 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c200d4 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "spi3"; -+ }; - }; - - soc@01c00000 { diff --git a/target/linux/sunxi/patches-3.13/122-2-dt-sun5i-add-mod0.patch b/target/linux/sunxi/patches-3.13/122-2-dt-sun5i-add-mod0.patch deleted file mode 100644 index 83a6217f6a..0000000000 --- a/target/linux/sunxi/patches-3.13/122-2-dt-sun5i-add-mod0.patch +++ /dev/null @@ -1,213 +0,0 @@ -From 9a8d3f21c94099a2bcd79ac1684cc8020fd98df2 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= -Date: Mon, 23 Dec 2013 00:32:42 -0300 -Subject: [PATCH] ARM: sun5i: dt: mod0 clocks -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This commit adds all the mod0 clocks available on A10 and A13. The list -has been constructed by looking at the Allwinner code release for A10S -and A13. - -Signed-off-by: Emilio López -Acked-by: Maxime Ripard ---- - arch/arm/boot/dts/sun5i-a10s.dtsi | 88 +++++++++++++++++++++++++++++++++++++++ - arch/arm/boot/dts/sun5i-a13.dtsi | 88 +++++++++++++++++++++++++++++++++++++++ - 2 files changed, 176 insertions(+) - ---- a/arch/arm/boot/dts/sun5i-a10s.dtsi -+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi -@@ -169,6 +169,94 @@ - "apb1_i2c2", "apb1_uart0", "apb1_uart1", - "apb1_uart2", "apb1_uart3"; - }; -+ -+ nand_clk: clk@01c20080 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c20080 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "nand"; -+ }; -+ -+ ms_clk: clk@01c20084 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c20084 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "ms"; -+ }; -+ -+ mmc0_clk: clk@01c20088 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c20088 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "mmc0"; -+ }; -+ -+ mmc1_clk: clk@01c2008c { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c2008c 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "mmc1"; -+ }; -+ -+ mmc2_clk: clk@01c20090 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c20090 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "mmc2"; -+ }; -+ -+ ts_clk: clk@01c20098 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c20098 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "ts"; -+ }; -+ -+ ss_clk: clk@01c2009c { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c2009c 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "ss"; -+ }; -+ -+ spi0_clk: clk@01c200a0 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c200a0 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "spi0"; -+ }; -+ -+ spi1_clk: clk@01c200a4 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c200a4 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "spi1"; -+ }; -+ -+ spi2_clk: clk@01c200a8 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c200a8 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "spi2"; -+ }; -+ -+ ir0_clk: clk@01c200b0 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c200b0 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "ir0"; -+ }; - }; - - soc@01c00000 { ---- a/arch/arm/boot/dts/sun5i-a13.dtsi -+++ b/arch/arm/boot/dts/sun5i-a13.dtsi -@@ -170,6 +170,94 @@ - clock-output-names = "apb1_i2c0", "apb1_i2c1", - "apb1_i2c2", "apb1_uart1", "apb1_uart3"; - }; -+ -+ nand_clk: clk@01c20080 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c20080 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "nand"; -+ }; -+ -+ ms_clk: clk@01c20084 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c20084 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "ms"; -+ }; -+ -+ mmc0_clk: clk@01c20088 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c20088 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "mmc0"; -+ }; -+ -+ mmc1_clk: clk@01c2008c { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c2008c 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "mmc1"; -+ }; -+ -+ mmc2_clk: clk@01c20090 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c20090 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "mmc2"; -+ }; -+ -+ ts_clk: clk@01c20098 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c20098 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "ts"; -+ }; -+ -+ ss_clk: clk@01c2009c { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c2009c 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "ss"; -+ }; -+ -+ spi0_clk: clk@01c200a0 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c200a0 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "spi0"; -+ }; -+ -+ spi1_clk: clk@01c200a4 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c200a4 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "spi1"; -+ }; -+ -+ spi2_clk: clk@01c200a8 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c200a8 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "spi2"; -+ }; -+ -+ ir0_clk: clk@01c200b0 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c200b0 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "ir0"; -+ }; - }; - - soc@01c00000 { diff --git a/target/linux/sunxi/patches-3.13/122-3-dt-sun7i-add-mod0.patch b/target/linux/sunxi/patches-3.13/122-3-dt-sun7i-add-mod0.patch deleted file mode 100644 index bcfedc004c..0000000000 --- a/target/linux/sunxi/patches-3.13/122-3-dt-sun7i-add-mod0.patch +++ /dev/null @@ -1,146 +0,0 @@ -From d7904e075e3378bec09333b6a3247b3146b3dd91 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= -Date: Mon, 23 Dec 2013 00:32:43 -0300 -Subject: [PATCH] ARM: sun7i: dt: mod0 clocks -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This commit adds all the mod0 clocks available on A20 to its device -tree. This list was created by looking at AW's code release. - -Signed-off-by: Emilio López -Acked-by: Maxime Ripard ---- - arch/arm/boot/dts/sun7i-a20.dtsi | 120 +++++++++++++++++++++++++++++++++++++++ - 1 file changed, 120 insertions(+) - ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -170,6 +170,126 @@ - "apb1_uart2", "apb1_uart3", "apb1_uart4", - "apb1_uart5", "apb1_uart6", "apb1_uart7"; - }; -+ -+ nand_clk: clk@01c20080 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c20080 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "nand"; -+ }; -+ -+ ms_clk: clk@01c20084 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c20084 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "ms"; -+ }; -+ -+ mmc0_clk: clk@01c20088 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c20088 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "mmc0"; -+ }; -+ -+ mmc1_clk: clk@01c2008c { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c2008c 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "mmc1"; -+ }; -+ -+ mmc2_clk: clk@01c20090 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c20090 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "mmc2"; -+ }; -+ -+ mmc3_clk: clk@01c20094 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c20094 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "mmc3"; -+ }; -+ -+ ts_clk: clk@01c20098 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c20098 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "ts"; -+ }; -+ -+ ss_clk: clk@01c2009c { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c2009c 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "ss"; -+ }; -+ -+ spi0_clk: clk@01c200a0 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c200a0 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "spi0"; -+ }; -+ -+ spi1_clk: clk@01c200a4 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c200a4 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "spi1"; -+ }; -+ -+ spi2_clk: clk@01c200a8 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c200a8 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "spi2"; -+ }; -+ -+ pata_clk: clk@01c200ac { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c200ac 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "pata"; -+ }; -+ -+ ir0_clk: clk@01c200b0 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c200b0 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "ir0"; -+ }; -+ -+ ir1_clk: clk@01c200b4 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c200b4 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "ir1"; -+ }; -+ -+ spi3_clk: clk@01c200d4 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c200d4 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "spi3"; -+ }; - }; - - soc@01c00000 { diff --git a/target/linux/sunxi/patches-3.13/123-clk-sunxi-automatic-reparenting.patch b/target/linux/sunxi/patches-3.13/123-clk-sunxi-automatic-reparenting.patch deleted file mode 100644 index cd635ed83b..0000000000 --- a/target/linux/sunxi/patches-3.13/123-clk-sunxi-automatic-reparenting.patch +++ /dev/null @@ -1,68 +0,0 @@ -From 04b5b3f9c83c0c0b472c4704d83ec7f56a485a21 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= -Date: Thu, 5 Sep 2013 19:52:41 -0300 -Subject: [PATCH] clk: sunxi: factors: automatic reparenting support -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This commit implements .determine_rate, so that our factor clocks can be -reparented when needed. - -Signed-off-by: Emilio López ---- - drivers/clk/sunxi/clk-factors.c | 36 ++++++++++++++++++++++++++++++++++++ - 1 file changed, 36 insertions(+) - ---- a/drivers/clk/sunxi/clk-factors.c -+++ b/drivers/clk/sunxi/clk-factors.c -@@ -77,6 +77,41 @@ static long clk_factors_round_rate(struc - return rate; - } - -+static long clk_factors_determine_rate(struct clk_hw *hw, unsigned long rate, -+ unsigned long *best_parent_rate, -+ struct clk **best_parent_p) -+{ -+ struct clk *clk = hw->clk, *parent, *best_parent = NULL; -+ int i, num_parents; -+ unsigned long parent_rate, best = 0, child_rate, best_child_rate = 0; -+ -+ /* find the parent that can help provide the fastest rate <= rate */ -+ num_parents = __clk_get_num_parents(clk); -+ for (i = 0; i < num_parents; i++) { -+ parent = clk_get_parent_by_index(clk, i); -+ if (!parent) -+ continue; -+ if (__clk_get_flags(clk) & CLK_SET_RATE_PARENT) -+ parent_rate = __clk_round_rate(parent, rate); -+ else -+ parent_rate = __clk_get_rate(parent); -+ -+ child_rate = clk_factors_round_rate(hw, rate, &parent_rate); -+ -+ if (child_rate <= rate && child_rate > best_child_rate) { -+ best_parent = parent; -+ best = parent_rate; -+ best_child_rate = child_rate; -+ } -+ } -+ -+ if (best_parent) -+ *best_parent_p = best_parent; -+ *best_parent_rate = best; -+ -+ return best_child_rate; -+} -+ - static int clk_factors_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) - { -@@ -113,6 +148,7 @@ static int clk_factors_set_rate(struct c - } - - const struct clk_ops clk_factors_ops = { -+ .determine_rate = clk_factors_determine_rate, - .recalc_rate = clk_factors_recalc_rate, - .round_rate = clk_factors_round_rate, - .set_rate = clk_factors_set_rate, diff --git a/target/linux/sunxi/patches-3.13/125-dt-sun6i-add-nodes-for-additional-cores.patch b/target/linux/sunxi/patches-3.13/125-dt-sun6i-add-nodes-for-additional-cores.patch deleted file mode 100644 index 8d0e23abe7..0000000000 --- a/target/linux/sunxi/patches-3.13/125-dt-sun6i-add-nodes-for-additional-cores.patch +++ /dev/null @@ -1,31 +0,0 @@ -From d3861805e84e1b54073e20dc499b9380b38bb7ab Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Sun, 3 Nov 2013 10:30:12 +0100 -Subject: [PATCH] ARM: sun6i: dt: Add IP needed to bring up the additional - cores - -Add the PRCM and CPU configuration units needed for SMP in the A31 DTSI. - -Signed-off-by: Maxime Ripard ---- - arch/arm/boot/dts/sun6i-a31.dtsi | 10 ++++++++++ - 1 file changed, 10 insertions(+) - ---- a/arch/arm/boot/dts/sun6i-a31.dtsi -+++ b/arch/arm/boot/dts/sun6i-a31.dtsi -@@ -322,5 +322,15 @@ - #interrupt-cells = <3>; - interrupts = <1 9 0xf04>; - }; -+ -+ cpucfg@01f01c00 { -+ compatible = "allwinner,sun6i-a31-cpuconfig"; -+ reg = <0x01f01c00 0x300>; -+ }; -+ -+ prcm@01f01c00 { -+ compatible = "allwinner,sun6i-a31-prcm"; -+ reg = <0x01f01400 0x200>; -+ }; - }; - }; diff --git a/target/linux/sunxi/patches-3.13/126-dt-sun7i-add-external-clock-outputs.patch b/target/linux/sunxi/patches-3.13/126-dt-sun7i-add-external-clock-outputs.patch deleted file mode 100644 index 84ca843c70..0000000000 --- a/target/linux/sunxi/patches-3.13/126-dt-sun7i-add-external-clock-outputs.patch +++ /dev/null @@ -1,58 +0,0 @@ -From 0aff0370cbffeadc14456556b904c80e30b3717e Mon Sep 17 00:00:00 2001 -From: Chen-Yu Tsai -Date: Wed, 1 Jan 2014 10:30:48 +0800 -Subject: [PATCH] ARM: dts: sun7i: external clock outputs - -This commit adds the two external clock outputs available on A20 to -its device tree. A dummy fixed factor clock is also added to serve as -the first input of the clock outputs, which according to AW's A20 user -manual, is the 24MHz oscillator divided by 750. - -Signed-off-by: Chen-Yu Tsai -Signed-off-by: Maxime Ripard ---- - arch/arm/boot/dts/sun7i-a20.dtsi | 28 ++++++++++++++++++++++++++++ - 1 file changed, 28 insertions(+) - -diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi -index edad6f1..0d54998 100644 ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -303,6 +303,34 @@ - clocks = <&osc24M>, <&pll6 2>, <&pll5 1>; - clock-output-names = "mbus"; - }; -+ -+ /* -+ * Dummy clock used by output clocks -+ */ -+ osc24M_32k: clk@1 { -+ #clock-cells = <0>; -+ compatible = "fixed-factor-clock"; -+ clock-div = <750>; -+ clock-mult = <1>; -+ clocks = <&osc24M>; -+ clock-output-names = "osc24M_32k"; -+ }; -+ -+ clk_out_a: clk@01c201f0 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun7i-a20-out-clk"; -+ reg = <0x01c201f0 0x4>; -+ clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>; -+ clock-output-names = "clk_out_a"; -+ }; -+ -+ clk_out_b: clk@01c201f4 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun7i-a20-out-clk"; -+ reg = <0x01c201f4 0x4>; -+ clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>; -+ clock-output-names = "clk_out_b"; -+ }; - }; - - soc@01c00000 { --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/127-1-dt-sun4i-rename-clock-node-names.patch b/target/linux/sunxi/patches-3.13/127-1-dt-sun4i-rename-clock-node-names.patch deleted file mode 100644 index dfcdba45b0..0000000000 --- a/target/linux/sunxi/patches-3.13/127-1-dt-sun4i-rename-clock-node-names.patch +++ /dev/null @@ -1,139 +0,0 @@ -From dfb12c0c35b6cca5e55f40870b65af87988adb3e Mon Sep 17 00:00:00 2001 -From: Chen-Yu Tsai -Date: Mon, 3 Feb 2014 09:51:41 +0800 -Subject: [PATCH] ARM: dts: sun4i: rename clock node names to clk@N - -Device tree naming conventions state that node names should match -node function. Change fully functioning clock nodes to match and -add clock-output-names to all sunxi clock nodes. - -Signed-off-by: Chen-Yu Tsai -Signed-off-by: Maxime Ripard ---- - arch/arm/boot/dts/sun4i-a10.dtsi | 30 ++++++++++++++++++++---------- - 1 file changed, 20 insertions(+), 10 deletions(-) - -diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi -index 28273f9..26cf191 100644 ---- a/arch/arm/boot/dts/sun4i-a10.dtsi -+++ b/arch/arm/boot/dts/sun4i-a10.dtsi -@@ -58,34 +58,38 @@ - clock-frequency = <0>; - }; - -- osc24M: osc24M@01c20050 { -+ osc24M: clk@01c20050 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-osc-clk"; - reg = <0x01c20050 0x4>; - clock-frequency = <24000000>; -+ clock-output-names = "osc24M"; - }; - -- osc32k: osc32k { -+ osc32k: clk@0 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; -+ clock-output-names = "osc32k"; - }; - -- pll1: pll1@01c20000 { -+ pll1: clk@01c20000 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-pll1-clk"; - reg = <0x01c20000 0x4>; - clocks = <&osc24M>; -+ clock-output-names = "pll1"; - }; - -- pll4: pll4@01c20018 { -+ pll4: clk@01c20018 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-pll1-clk"; - reg = <0x01c20018 0x4>; - clocks = <&osc24M>; -+ clock-output-names = "pll4"; - }; - -- pll5: pll5@01c20020 { -+ pll5: clk@01c20020 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-pll5-clk"; - reg = <0x01c20020 0x4>; -@@ -93,7 +97,7 @@ - clock-output-names = "pll5_ddr", "pll5_other"; - }; - -- pll6: pll6@01c20028 { -+ pll6: clk@01c20028 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-pll6-clk"; - reg = <0x01c20028 0x4>; -@@ -107,6 +111,7 @@ - compatible = "allwinner,sun4i-cpu-clk"; - reg = <0x01c20054 0x4>; - clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>; -+ clock-output-names = "cpu"; - }; - - axi: axi@01c20054 { -@@ -114,9 +119,10 @@ - compatible = "allwinner,sun4i-axi-clk"; - reg = <0x01c20054 0x4>; - clocks = <&cpu>; -+ clock-output-names = "axi"; - }; - -- axi_gates: axi_gates@01c2005c { -+ axi_gates: clk@01c2005c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-axi-gates-clk"; - reg = <0x01c2005c 0x4>; -@@ -129,9 +135,10 @@ - compatible = "allwinner,sun4i-ahb-clk"; - reg = <0x01c20054 0x4>; - clocks = <&axi>; -+ clock-output-names = "ahb"; - }; - -- ahb_gates: ahb_gates@01c20060 { -+ ahb_gates: clk@01c20060 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-ahb-gates-clk"; - reg = <0x01c20060 0x8>; -@@ -154,9 +161,10 @@ - compatible = "allwinner,sun4i-apb0-clk"; - reg = <0x01c20054 0x4>; - clocks = <&ahb>; -+ clock-output-names = "apb0"; - }; - -- apb0_gates: apb0_gates@01c20068 { -+ apb0_gates: clk@01c20068 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-apb0-gates-clk"; - reg = <0x01c20068 0x4>; -@@ -171,6 +179,7 @@ - compatible = "allwinner,sun4i-apb1-mux-clk"; - reg = <0x01c20058 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&osc32k>; -+ clock-output-names = "apb1_mux"; - }; - - apb1: apb1@01c20058 { -@@ -178,9 +187,10 @@ - compatible = "allwinner,sun4i-apb1-clk"; - reg = <0x01c20058 0x4>; - clocks = <&apb1_mux>; -+ clock-output-names = "apb1"; - }; - -- apb1_gates: apb1_gates@01c2006c { -+ apb1_gates: clk@01c2006c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-apb1-gates-clk"; - reg = <0x01c2006c 0x4>; --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/127-2-dt-sun5i-rename-clock-node-names.patch b/target/linux/sunxi/patches-3.13/127-2-dt-sun5i-rename-clock-node-names.patch deleted file mode 100644 index 1678a8bbb7..0000000000 --- a/target/linux/sunxi/patches-3.13/127-2-dt-sun5i-rename-clock-node-names.patch +++ /dev/null @@ -1,261 +0,0 @@ -From 3dce8324949eaa1ab4b750e8422ce78ddceb7aa4 Mon Sep 17 00:00:00 2001 -From: Chen-Yu Tsai -Date: Mon, 3 Feb 2014 09:51:42 +0800 -Subject: [PATCH] ARM: dts: sun5i: rename clock node names to clk@N - -Device tree naming conventions state that node names should match -node function. Change fully functioning clock nodes to match and -add clock-output-names to all sunxi clock nodes. - -Signed-off-by: Chen-Yu Tsai -Signed-off-by: Maxime Ripard ---- - arch/arm/boot/dts/sun5i-a10s.dtsi | 30 ++++++++++++++++++++---------- - arch/arm/boot/dts/sun5i-a13.dtsi | 30 ++++++++++++++++++++---------- - 2 files changed, 40 insertions(+), 20 deletions(-) - -diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi -index 2318082..b114be7 100644 ---- a/arch/arm/boot/dts/sun5i-a10s.dtsi -+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi -@@ -51,34 +51,38 @@ - clock-frequency = <0>; - }; - -- osc24M: osc24M@01c20050 { -+ osc24M: clk@01c20050 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-osc-clk"; - reg = <0x01c20050 0x4>; - clock-frequency = <24000000>; -+ clock-output-names = "osc24M"; - }; - -- osc32k: osc32k { -+ osc32k: clk@0 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; -+ clock-output-names = "osc32k"; - }; - -- pll1: pll1@01c20000 { -+ pll1: clk@01c20000 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-pll1-clk"; - reg = <0x01c20000 0x4>; - clocks = <&osc24M>; -+ clock-output-names = "pll1"; - }; - -- pll4: pll4@01c20018 { -+ pll4: clk@01c20018 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-pll1-clk"; - reg = <0x01c20018 0x4>; - clocks = <&osc24M>; -+ clock-output-names = "pll4"; - }; - -- pll5: pll5@01c20020 { -+ pll5: clk@01c20020 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-pll5-clk"; - reg = <0x01c20020 0x4>; -@@ -86,7 +90,7 @@ - clock-output-names = "pll5_ddr", "pll5_other"; - }; - -- pll6: pll6@01c20028 { -+ pll6: clk@01c20028 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-pll6-clk"; - reg = <0x01c20028 0x4>; -@@ -100,6 +104,7 @@ - compatible = "allwinner,sun4i-cpu-clk"; - reg = <0x01c20054 0x4>; - clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>; -+ clock-output-names = "cpu"; - }; - - axi: axi@01c20054 { -@@ -107,9 +112,10 @@ - compatible = "allwinner,sun4i-axi-clk"; - reg = <0x01c20054 0x4>; - clocks = <&cpu>; -+ clock-output-names = "axi"; - }; - -- axi_gates: axi_gates@01c2005c { -+ axi_gates: clk@01c2005c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-axi-gates-clk"; - reg = <0x01c2005c 0x4>; -@@ -122,9 +128,10 @@ - compatible = "allwinner,sun4i-ahb-clk"; - reg = <0x01c20054 0x4>; - clocks = <&axi>; -+ clock-output-names = "ahb"; - }; - -- ahb_gates: ahb_gates@01c20060 { -+ ahb_gates: clk@01c20060 { - #clock-cells = <1>; - compatible = "allwinner,sun5i-a10s-ahb-gates-clk"; - reg = <0x01c20060 0x8>; -@@ -143,9 +150,10 @@ - compatible = "allwinner,sun4i-apb0-clk"; - reg = <0x01c20054 0x4>; - clocks = <&ahb>; -+ clock-output-names = "apb0"; - }; - -- apb0_gates: apb0_gates@01c20068 { -+ apb0_gates: clk@01c20068 { - #clock-cells = <1>; - compatible = "allwinner,sun5i-a10s-apb0-gates-clk"; - reg = <0x01c20068 0x4>; -@@ -159,6 +167,7 @@ - compatible = "allwinner,sun4i-apb1-mux-clk"; - reg = <0x01c20058 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&osc32k>; -+ clock-output-names = "apb1_mux"; - }; - - apb1: apb1@01c20058 { -@@ -166,9 +175,10 @@ - compatible = "allwinner,sun4i-apb1-clk"; - reg = <0x01c20058 0x4>; - clocks = <&apb1_mux>; -+ clock-output-names = "apb1"; - }; - -- apb1_gates: apb1_gates@01c2006c { -+ apb1_gates: clk@01c2006c { - #clock-cells = <1>; - compatible = "allwinner,sun5i-a10s-apb1-gates-clk"; - reg = <0x01c2006c 0x4>; -diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi -index 6de40b6..5c121fc 100644 ---- a/arch/arm/boot/dts/sun5i-a13.dtsi -+++ b/arch/arm/boot/dts/sun5i-a13.dtsi -@@ -52,34 +52,38 @@ - clock-frequency = <0>; - }; - -- osc24M: osc24M@01c20050 { -+ osc24M: clk@01c20050 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-osc-clk"; - reg = <0x01c20050 0x4>; - clock-frequency = <24000000>; -+ clock-output-names = "osc24M"; - }; - -- osc32k: osc32k { -+ osc32k: clk@0 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; -+ clock-output-names = "osc32k"; - }; - -- pll1: pll1@01c20000 { -+ pll1: clk@01c20000 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-pll1-clk"; - reg = <0x01c20000 0x4>; - clocks = <&osc24M>; -+ clock-output-names = "pll1"; - }; - -- pll4: pll4@01c20018 { -+ pll4: clk@01c20018 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-pll1-clk"; - reg = <0x01c20018 0x4>; - clocks = <&osc24M>; -+ clock-output-names = "pll4"; - }; - -- pll5: pll5@01c20020 { -+ pll5: clk@01c20020 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-pll5-clk"; - reg = <0x01c20020 0x4>; -@@ -87,7 +91,7 @@ - clock-output-names = "pll5_ddr", "pll5_other"; - }; - -- pll6: pll6@01c20028 { -+ pll6: clk@01c20028 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-pll6-clk"; - reg = <0x01c20028 0x4>; -@@ -101,6 +105,7 @@ - compatible = "allwinner,sun4i-cpu-clk"; - reg = <0x01c20054 0x4>; - clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>; -+ clock-output-names = "cpu"; - }; - - axi: axi@01c20054 { -@@ -108,9 +113,10 @@ - compatible = "allwinner,sun4i-axi-clk"; - reg = <0x01c20054 0x4>; - clocks = <&cpu>; -+ clock-output-names = "axi"; - }; - -- axi_gates: axi_gates@01c2005c { -+ axi_gates: clk@01c2005c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-axi-gates-clk"; - reg = <0x01c2005c 0x4>; -@@ -123,9 +129,10 @@ - compatible = "allwinner,sun4i-ahb-clk"; - reg = <0x01c20054 0x4>; - clocks = <&axi>; -+ clock-output-names = "ahb"; - }; - -- ahb_gates: ahb_gates@01c20060 { -+ ahb_gates: clk@01c20060 { - #clock-cells = <1>; - compatible = "allwinner,sun5i-a13-ahb-gates-clk"; - reg = <0x01c20060 0x8>; -@@ -143,9 +150,10 @@ - compatible = "allwinner,sun4i-apb0-clk"; - reg = <0x01c20054 0x4>; - clocks = <&ahb>; -+ clock-output-names = "apb0"; - }; - -- apb0_gates: apb0_gates@01c20068 { -+ apb0_gates: clk@01c20068 { - #clock-cells = <1>; - compatible = "allwinner,sun5i-a13-apb0-gates-clk"; - reg = <0x01c20068 0x4>; -@@ -158,6 +166,7 @@ - compatible = "allwinner,sun4i-apb1-mux-clk"; - reg = <0x01c20058 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&osc32k>; -+ clock-output-names = "apb1_mux"; - }; - - apb1: apb1@01c20058 { -@@ -165,9 +174,10 @@ - compatible = "allwinner,sun4i-apb1-clk"; - reg = <0x01c20058 0x4>; - clocks = <&apb1_mux>; -+ clock-output-names = "apb1"; - }; - -- apb1_gates: apb1_gates@01c2006c { -+ apb1_gates: clk@01c2006c { - #clock-cells = <1>; - compatible = "allwinner,sun5i-a13-apb1-gates-clk"; - reg = <0x01c2006c 0x4>; --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/127-3-dt-sun6i-rename-clock-node-names.patch b/target/linux/sunxi/patches-3.13/127-3-dt-sun6i-rename-clock-node-names.patch deleted file mode 100644 index fe0a1a005f..0000000000 --- a/target/linux/sunxi/patches-3.13/127-3-dt-sun6i-rename-clock-node-names.patch +++ /dev/null @@ -1,112 +0,0 @@ -From 5cd0fa24e51d342f175d31ecb72c2e957a6bd0af Mon Sep 17 00:00:00 2001 -From: Chen-Yu Tsai -Date: Mon, 3 Feb 2014 09:51:43 +0800 -Subject: [PATCH] ARM: dts: sun6i: rename clock node names to clk@N - -Device tree naming conventions state that node names should match -node function. Change fully functioning clock nodes to match and -add clock-output-names to all sunxi clock nodes. - -Signed-off-by: Chen-Yu Tsai -Signed-off-by: Maxime Ripard ---- - arch/arm/boot/dts/sun6i-a31.dtsi | 19 ++++++++++++++----- - 1 file changed, 14 insertions(+), 5 deletions(-) - -diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi -index fc07f70..d3f1995 100644 ---- a/arch/arm/boot/dts/sun6i-a31.dtsi -+++ b/arch/arm/boot/dts/sun6i-a31.dtsi -@@ -70,17 +70,19 @@ - clock-frequency = <24000000>; - }; - -- osc32k: osc32k { -+ osc32k: clk@0 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; -+ clock-output-names = "osc32k"; - }; - -- pll1: pll1@01c20000 { -+ pll1: clk@01c20000 { - #clock-cells = <0>; - compatible = "allwinner,sun6i-a31-pll1-clk"; - reg = <0x01c20000 0x4>; - clocks = <&osc24M>; -+ clock-output-names = "pll1"; - }; - - pll6: clk@01c20028 { -@@ -103,6 +105,7 @@ - * Allwinner. - */ - clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>; -+ clock-output-names = "cpu"; - }; - - axi: axi@01c20050 { -@@ -110,6 +113,7 @@ - compatible = "allwinner,sun4i-axi-clk"; - reg = <0x01c20050 0x4>; - clocks = <&cpu>; -+ clock-output-names = "axi"; - }; - - ahb1_mux: ahb1_mux@01c20054 { -@@ -117,6 +121,7 @@ - compatible = "allwinner,sun6i-a31-ahb1-mux-clk"; - reg = <0x01c20054 0x4>; - clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6>; -+ clock-output-names = "ahb1_mux"; - }; - - ahb1: ahb1@01c20054 { -@@ -124,9 +129,10 @@ - compatible = "allwinner,sun4i-ahb-clk"; - reg = <0x01c20054 0x4>; - clocks = <&ahb1_mux>; -+ clock-output-names = "ahb1"; - }; - -- ahb1_gates: ahb1_gates@01c20060 { -+ ahb1_gates: clk@01c20060 { - #clock-cells = <1>; - compatible = "allwinner,sun6i-a31-ahb1-gates-clk"; - reg = <0x01c20060 0x8>; -@@ -152,9 +158,10 @@ - compatible = "allwinner,sun4i-apb0-clk"; - reg = <0x01c20054 0x4>; - clocks = <&ahb1>; -+ clock-output-names = "apb1"; - }; - -- apb1_gates: apb1_gates@01c20060 { -+ apb1_gates: clk@01c20068 { - #clock-cells = <1>; - compatible = "allwinner,sun6i-a31-apb1-gates-clk"; - reg = <0x01c20068 0x4>; -@@ -169,6 +176,7 @@ - compatible = "allwinner,sun4i-apb1-mux-clk"; - reg = <0x01c20058 0x4>; - clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>; -+ clock-output-names = "apb2_mux"; - }; - - apb2: apb2@01c20058 { -@@ -176,9 +184,10 @@ - compatible = "allwinner,sun6i-a31-apb2-div-clk"; - reg = <0x01c20058 0x4>; - clocks = <&apb2_mux>; -+ clock-output-names = "apb2"; - }; - -- apb2_gates: apb2_gates@01c2006c { -+ apb2_gates: clk@01c2006c { - #clock-cells = <1>; - compatible = "allwinner,sun6i-a31-apb2-gates-clk"; - reg = <0x01c2006c 0x4>; --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/127-4-dt-sun7i-rename-clock-node-names.patch b/target/linux/sunxi/patches-3.13/127-4-dt-sun7i-rename-clock-node-names.patch deleted file mode 100644 index 0fba0bc3ae..0000000000 --- a/target/linux/sunxi/patches-3.13/127-4-dt-sun7i-rename-clock-node-names.patch +++ /dev/null @@ -1,132 +0,0 @@ -From cb6050998de262d5acf2207c5451d4f5995a5bff Mon Sep 17 00:00:00 2001 -From: Chen-Yu Tsai -Date: Mon, 3 Feb 2014 09:51:44 +0800 -Subject: [PATCH] ARM: dts: sun7i: rename clock node names to clk@N - -Device tree naming conventions state that node names should match -node function. Change fully functioning clock nodes to match and -add clock-output-names to all sunxi clock nodes. - -Signed-off-by: Chen-Yu Tsai -Signed-off-by: Maxime Ripard ---- - arch/arm/boot/dts/sun7i-a20.dtsi | 25 +++++++++++++++++-------- - 1 file changed, 17 insertions(+), 8 deletions(-) - -diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi -index fe0fe47..cefd7ac 100644 ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -54,11 +54,12 @@ - #size-cells = <1>; - ranges; - -- osc24M: osc24M@01c20050 { -+ osc24M: clk@01c20050 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-osc-clk"; - reg = <0x01c20050 0x4>; - clock-frequency = <24000000>; -+ clock-output-names = "osc24M"; - }; - - osc32k: clk@0 { -@@ -68,21 +69,23 @@ - clock-output-names = "osc32k"; - }; - -- pll1: pll1@01c20000 { -+ pll1: clk@01c20000 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-pll1-clk"; - reg = <0x01c20000 0x4>; - clocks = <&osc24M>; -+ clock-output-names = "pll1"; - }; - -- pll4: pll4@01c20018 { -+ pll4: clk@01c20018 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-pll1-clk"; - reg = <0x01c20018 0x4>; - clocks = <&osc24M>; -+ clock-output-names = "pll4"; - }; - -- pll5: pll5@01c20020 { -+ pll5: clk@01c20020 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-pll5-clk"; - reg = <0x01c20020 0x4>; -@@ -90,7 +93,7 @@ - clock-output-names = "pll5_ddr", "pll5_other"; - }; - -- pll6: pll6@01c20028 { -+ pll6: clk@01c20028 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-pll6-clk"; - reg = <0x01c20028 0x4>; -@@ -103,6 +106,7 @@ - compatible = "allwinner,sun4i-cpu-clk"; - reg = <0x01c20054 0x4>; - clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll6 1>; -+ clock-output-names = "cpu"; - }; - - axi: axi@01c20054 { -@@ -110,6 +114,7 @@ - compatible = "allwinner,sun4i-axi-clk"; - reg = <0x01c20054 0x4>; - clocks = <&cpu>; -+ clock-output-names = "axi"; - }; - - ahb: ahb@01c20054 { -@@ -117,9 +122,10 @@ - compatible = "allwinner,sun4i-ahb-clk"; - reg = <0x01c20054 0x4>; - clocks = <&axi>; -+ clock-output-names = "ahb"; - }; - -- ahb_gates: ahb_gates@01c20060 { -+ ahb_gates: clk@01c20060 { - #clock-cells = <1>; - compatible = "allwinner,sun7i-a20-ahb-gates-clk"; - reg = <0x01c20060 0x8>; -@@ -144,9 +150,10 @@ - compatible = "allwinner,sun4i-apb0-clk"; - reg = <0x01c20054 0x4>; - clocks = <&ahb>; -+ clock-output-names = "apb0"; - }; - -- apb0_gates: apb0_gates@01c20068 { -+ apb0_gates: clk@01c20068 { - #clock-cells = <1>; - compatible = "allwinner,sun7i-a20-apb0-gates-clk"; - reg = <0x01c20068 0x4>; -@@ -162,6 +169,7 @@ - compatible = "allwinner,sun4i-apb1-mux-clk"; - reg = <0x01c20058 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&osc32k>; -+ clock-output-names = "apb1_mux"; - }; - - apb1: apb1@01c20058 { -@@ -169,9 +177,10 @@ - compatible = "allwinner,sun4i-apb1-clk"; - reg = <0x01c20058 0x4>; - clocks = <&apb1_mux>; -+ clock-output-names = "apb1"; - }; - -- apb1_gates: apb1_gates@01c2006c { -+ apb1_gates: clk@01c2006c { - #clock-cells = <1>; - compatible = "allwinner,sun7i-a20-apb1-gates-clk"; - reg = <0x01c2006c 0x4>; --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/128-dt-sunxi-add-mbusclk.patch b/target/linux/sunxi/patches-3.13/128-dt-sunxi-add-mbusclk.patch deleted file mode 100644 index cb8b109ef9..0000000000 --- a/target/linux/sunxi/patches-3.13/128-dt-sunxi-add-mbusclk.patch +++ /dev/null @@ -1,70 +0,0 @@ -From 538d4a6ca5f41039d906f28be82e0f4d26ec8ac9 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= -Date: Mon, 23 Dec 2013 00:32:44 -0300 -Subject: [PATCH] ARM: sunxi: dt: add nodes for the mbus clock -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -mbus is the memory bus clock, and it is present on both sun5i and sun7i -machines. Its register layout is compatible with the mod0 one. - -Signed-off-by: Emilio López -Acked-by: Maxime Ripard ---- - arch/arm/boot/dts/sun5i-a10s.dtsi | 8 ++++++++ - arch/arm/boot/dts/sun5i-a13.dtsi | 8 ++++++++ - arch/arm/boot/dts/sun7i-a20.dtsi | 8 ++++++++ - 3 files changed, 24 insertions(+) - ---- a/arch/arm/boot/dts/sun5i-a10s.dtsi -+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi -@@ -257,6 +257,14 @@ - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ir0"; - }; -+ -+ mbus_clk: clk@01c2015c { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c2015c 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "mbus"; -+ }; - }; - - soc@01c00000 { ---- a/arch/arm/boot/dts/sun5i-a13.dtsi -+++ b/arch/arm/boot/dts/sun5i-a13.dtsi -@@ -258,6 +258,14 @@ - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ir0"; - }; -+ -+ mbus_clk: clk@01c2015c { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c2015c 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; -+ clock-output-names = "mbus"; -+ }; - }; - - soc@01c00000 { ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -290,6 +290,14 @@ - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi3"; - }; -+ -+ mbus_clk: clk@01c2015c { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c2015c 0x4>; -+ clocks = <&osc24M>, <&pll6 2>, <&pll5 1>; -+ clock-output-names = "mbus"; -+ }; - }; - - soc@01c00000 { diff --git a/target/linux/sunxi/patches-3.13/130-1-dt-sunxi-add-emac-aliases.patch b/target/linux/sunxi/patches-3.13/130-1-dt-sunxi-add-emac-aliases.patch deleted file mode 100644 index 70a57871bc..0000000000 --- a/target/linux/sunxi/patches-3.13/130-1-dt-sunxi-add-emac-aliases.patch +++ /dev/null @@ -1,60 +0,0 @@ -From 2af807481169af627dc63f98b773c33d85020658 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= -Date: Fri, 15 Nov 2013 15:26:44 -0300 -Subject: [PATCH] ARM: sunxi: dt: add EMAC aliases -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -U-Boot uses the ethernet0 alias to locate the right node to fill in -the MAC address of the first ethernet interface. This patch adds the -alias on all the sunxi SoCs with EMAC. In this way, people using -ethernet in U-Boot (eg, for tftp) can keep a consistent address on both -U-Boot and Linux with no additional effort. - -Signed-off-by: Emilio López ---- - arch/arm/boot/dts/sun4i-a10.dtsi | 4 ++++ - arch/arm/boot/dts/sun5i-a10s.dtsi | 4 ++++ - arch/arm/boot/dts/sun7i-a20.dtsi | 4 ++++ - 3 files changed, 12 insertions(+) - ---- a/arch/arm/boot/dts/sun4i-a10.dtsi -+++ b/arch/arm/boot/dts/sun4i-a10.dtsi -@@ -15,6 +15,10 @@ - / { - interrupt-parent = <&intc>; - -+ aliases { -+ ethernet0 = &emac; -+ }; -+ - cpus { - #address-cells = <1>; - #size-cells = <0>; ---- a/arch/arm/boot/dts/sun5i-a10s.dtsi -+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi -@@ -16,6 +16,10 @@ - / { - interrupt-parent = <&intc>; - -+ aliases { -+ ethernet0 = &emac; -+ }; -+ - cpus { - cpu@0 { - compatible = "arm,cortex-a8"; ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -16,6 +16,10 @@ - / { - interrupt-parent = <&gic>; - -+ aliases { -+ ethernet0 = &emac; -+ }; -+ - cpus { - #address-cells = <1>; - #size-cells = <0>; diff --git a/target/linux/sunxi/patches-3.13/130-2-dt-sun7i-update-eth-aliases.patch b/target/linux/sunxi/patches-3.13/130-2-dt-sun7i-update-eth-aliases.patch deleted file mode 100644 index 543dd57ad1..0000000000 --- a/target/linux/sunxi/patches-3.13/130-2-dt-sun7i-update-eth-aliases.patch +++ /dev/null @@ -1,25 +0,0 @@ -From dfd4430579f5e53324c00e9e21fb0929bb46542c Mon Sep 17 00:00:00 2001 -From: Chen-Yu Tsai -Date: Sat, 7 Dec 2013 01:29:43 +0800 -Subject: [PATCH] ARM: dts: sun7i: Add ethernet alias for GMAC - -U-Boot will insert MAC address into the device tree image. -It looks up ethernet[0-5] aliases to find the ethernet nodes. -Alias GMAC as ethernet0, as it is the only ethernet controller used. - -Signed-off-by: Chen-Yu Tsai ---- - arch/arm/boot/dts/sun7i-a20.dtsi | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -17,7 +17,7 @@ - interrupt-parent = <&gic>; - - aliases { -- ethernet0 = &emac; -+ ethernet0 = &gmac; - }; - - cpus { diff --git a/target/linux/sunxi/patches-3.13/131-dt-sun7i-add-arch-timers.patch b/target/linux/sunxi/patches-3.13/131-dt-sun7i-add-arch-timers.patch deleted file mode 100644 index dc9f8ac362..0000000000 --- a/target/linux/sunxi/patches-3.13/131-dt-sun7i-add-arch-timers.patch +++ /dev/null @@ -1,38 +0,0 @@ -From fdc4530902ed845fc0f31b9bbcc45e05fefe21da Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Sun, 1 Dec 2013 22:40:34 +0100 -Subject: [PATCH] ARM: dts: sun7i: Add arch timers - -Note this requires a new enough uboot, otherwise things won't work, ie: - -https://github.com/jwrdegoede/u-boot-sunxi/commits/sunxi-next -or: -http://xenbits.xen.org/gitweb/?p=people/ianc/u-boot.git;a=shortlog;h=refs/heads/devel/sunxi-psci - -Signed-off-by: Hans de Goede ---- - arch/arm/boot/dts/sun7i-a20.dtsi | 8 ++++++++ - 1 file changed, 8 insertions(+) - -diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi -index f4ecd79..fa2ef07 100644 ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -370,6 +370,14 @@ - }; - }; - -+ timer { -+ compatible = "arm,armv7-timer"; -+ interrupts = <1 13 0xf08>, -+ <1 14 0xf08>, -+ <1 11 0xf08>, -+ <1 10 0xf08>; -+ }; -+ - soc@01c00000 { - compatible = "simple-bus"; - #address-cells = <1>; --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/132-dt-sun5i-a13-add-olinuxino-micro.patch b/target/linux/sunxi/patches-3.13/132-dt-sun5i-a13-add-olinuxino-micro.patch deleted file mode 100644 index 93b72523ca..0000000000 --- a/target/linux/sunxi/patches-3.13/132-dt-sun5i-a13-add-olinuxino-micro.patch +++ /dev/null @@ -1,108 +0,0 @@ -From aad62992a2921436ec7c054f8b80bc916b8cc9d7 Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Sat, 14 Dec 2013 16:26:17 +0100 -Subject: [PATCH] ARM: dts: sun5i: Add new sun5i-a13-olinuxino-micro board - -The A13-OLinuXino-MICRO is a small dev-board with the Allwinner A13 SoC: -https://www.olimex.com/Products/OLinuXino/A13/A13-OLinuXino-MICRO/ - -Features: -A13 Cortex A8 processor at 1GHz, 3D Mali400 GPU -256 MB RAM (128Mbit x 16) -5VDC input power supply with own ICs, noise immune design -1 USB host -1 USB OTG which can power the board -SD-card connector for booting the Linux image -VGA video output -LCD signals available on connector so you still can use LCD if you disable VGA/HDMI -Audio output -Microphone input pads (no connector) - -Signed-off-by: Hans de Goede ---- - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts | 68 +++++++++++++++++++++++++ - 2 files changed, 69 insertions(+) - create mode 100644 arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -255,6 +255,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += \ - sun4i-a10-hackberry.dtb \ - sun5i-a10s-olinuxino-micro.dtb \ - sun5i-a13-olinuxino.dtb \ -+ sun5i-a13-olinuxino-micro.dtb \ - sun6i-a31-colombus.dtb \ - sun7i-a20-cubieboard2.dtb \ - sun7i-a20-cubietruck.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts -@@ -0,0 +1,68 @@ -+/* -+ * Copyright 2012 Maxime Ripard -+ * Copyright 2013 Hans de Goede -+ * -+ * Maxime Ripard -+ * -+ * The code contained herein is licensed under the GNU General Public -+ * License. You may obtain a copy of the GNU General Public License -+ * Version 2 or later at the following locations: -+ * -+ * http://www.opensource.org/licenses/gpl-license.html -+ * http://www.gnu.org/copyleft/gpl.html -+ */ -+ -+/dts-v1/; -+/include/ "sun5i-a13.dtsi" -+ -+/ { -+ model = "Olimex A13-Olinuxino Micro"; -+ compatible = "olimex,a13-olinuxino-micro", "allwinner,sun5i-a13"; -+ -+ soc@01c00000 { -+ pinctrl@01c20800 { -+ led_pins_olinuxinom: led_pins@0 { -+ allwinner,pins = "PG9"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <1>; -+ allwinner,pull = <0>; -+ }; -+ }; -+ -+ uart1: serial@01c28400 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart1_pins_b>; -+ status = "okay"; -+ }; -+ -+ i2c0: i2c@01c2ac00 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c0_pins_a>; -+ status = "okay"; -+ }; -+ -+ i2c1: i2c@01c2b000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c1_pins_a>; -+ status = "okay"; -+ }; -+ -+ i2c2: i2c@01c2b400 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c2_pins_a>; -+ status = "okay"; -+ }; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&led_pins_olinuxinom>; -+ -+ power { -+ label = "a13-olinuxino-micro:green:power"; -+ gpios = <&pio 6 9 0>; -+ default-state = "on"; -+ }; -+ }; -+}; diff --git a/target/linux/sunxi/patches-3.13/140-sun47i-rtc-driver.patch b/target/linux/sunxi/patches-3.13/140-sun47i-rtc-driver.patch deleted file mode 100644 index 3baa9df3fe..0000000000 --- a/target/linux/sunxi/patches-3.13/140-sun47i-rtc-driver.patch +++ /dev/null @@ -1,570 +0,0 @@ -From c6890cadc2129a07d69f3dcbfca66522c27b8069 Mon Sep 17 00:00:00 2001 -From: Carlo Caione -Date: Sat, 16 Nov 2013 18:33:54 +0100 -Subject: [PATCH] ARM: sun4i/sun7i: RTC driver - -This patch introduces the driver for the RTC in the Allwinner A10 and -A20 SoCs. - -Signed-off-by: Carlo Caione -Acked-by: Alessandro Zummo -Signed-off-by: Maxime Ripard ---- - drivers/rtc/Kconfig | 7 + - drivers/rtc/Makefile | 1 + - drivers/rtc/rtc-sunxi.c | 523 ++++++++++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 531 insertions(+) - create mode 100644 drivers/rtc/rtc-sunxi.c - ---- a/drivers/rtc/Kconfig -+++ b/drivers/rtc/Kconfig -@@ -1122,6 +1122,13 @@ config RTC_DRV_SUN4V - If you say Y here you will get support for the Hypervisor - based RTC on SUN4V systems. - -+config RTC_DRV_SUNXI -+ tristate "Allwinner sun4i/sun7i RTC" -+ depends on ARCH_SUNXI -+ help -+ If you say Y here you will get support for the RTC found on -+ Allwinner A10/A20. -+ - config RTC_DRV_STARFIRE - bool "Starfire RTC" - depends on SPARC64 ---- a/drivers/rtc/Makefile -+++ b/drivers/rtc/Makefile -@@ -119,6 +119,7 @@ obj-$(CONFIG_RTC_DRV_STARFIRE) += rtc-st - obj-$(CONFIG_RTC_DRV_STK17TA8) += rtc-stk17ta8.o - obj-$(CONFIG_RTC_DRV_STMP) += rtc-stmp3xxx.o - obj-$(CONFIG_RTC_DRV_SUN4V) += rtc-sun4v.o -+obj-$(CONFIG_RTC_DRV_SUNXI) += rtc-sunxi.o - obj-$(CONFIG_RTC_DRV_TEGRA) += rtc-tegra.o - obj-$(CONFIG_RTC_DRV_TEST) += rtc-test.o - obj-$(CONFIG_RTC_DRV_TILE) += rtc-tile.o ---- /dev/null -+++ b/drivers/rtc/rtc-sunxi.c -@@ -0,0 +1,523 @@ -+/* -+ * An RTC driver for Allwinner A10/A20 -+ * -+ * Copyright (c) 2013, Carlo Caione -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, but WITHOUT -+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -+ * more details. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define SUNXI_LOSC_CTRL 0x0000 -+#define SUNXI_LOSC_CTRL_RTC_HMS_ACC BIT(8) -+#define SUNXI_LOSC_CTRL_RTC_YMD_ACC BIT(7) -+ -+#define SUNXI_RTC_YMD 0x0004 -+ -+#define SUNXI_RTC_HMS 0x0008 -+ -+#define SUNXI_ALRM_DHMS 0x000c -+ -+#define SUNXI_ALRM_EN 0x0014 -+#define SUNXI_ALRM_EN_CNT_EN BIT(8) -+ -+#define SUNXI_ALRM_IRQ_EN 0x0018 -+#define SUNXI_ALRM_IRQ_EN_CNT_IRQ_EN BIT(0) -+ -+#define SUNXI_ALRM_IRQ_STA 0x001c -+#define SUNXI_ALRM_IRQ_STA_CNT_IRQ_PEND BIT(0) -+ -+#define SUNXI_MASK_DH 0x0000001f -+#define SUNXI_MASK_SM 0x0000003f -+#define SUNXI_MASK_M 0x0000000f -+#define SUNXI_MASK_LY 0x00000001 -+#define SUNXI_MASK_D 0x00000ffe -+#define SUNXI_MASK_M 0x0000000f -+ -+#define SUNXI_GET(x, mask, shift) (((x) & ((mask) << (shift))) \ -+ >> (shift)) -+ -+#define SUNXI_SET(x, mask, shift) (((x) & (mask)) << (shift)) -+ -+/* -+ * Get date values -+ */ -+#define SUNXI_DATE_GET_DAY_VALUE(x) SUNXI_GET(x, SUNXI_MASK_DH, 0) -+#define SUNXI_DATE_GET_MON_VALUE(x) SUNXI_GET(x, SUNXI_MASK_M, 8) -+#define SUNXI_DATE_GET_YEAR_VALUE(x, mask) SUNXI_GET(x, mask, 16) -+ -+/* -+ * Get time values -+ */ -+#define SUNXI_TIME_GET_SEC_VALUE(x) SUNXI_GET(x, SUNXI_MASK_SM, 0) -+#define SUNXI_TIME_GET_MIN_VALUE(x) SUNXI_GET(x, SUNXI_MASK_SM, 8) -+#define SUNXI_TIME_GET_HOUR_VALUE(x) SUNXI_GET(x, SUNXI_MASK_DH, 16) -+ -+/* -+ * Get alarm values -+ */ -+#define SUNXI_ALRM_GET_SEC_VALUE(x) SUNXI_GET(x, SUNXI_MASK_SM, 0) -+#define SUNXI_ALRM_GET_MIN_VALUE(x) SUNXI_GET(x, SUNXI_MASK_SM, 8) -+#define SUNXI_ALRM_GET_HOUR_VALUE(x) SUNXI_GET(x, SUNXI_MASK_DH, 16) -+ -+/* -+ * Set date values -+ */ -+#define SUNXI_DATE_SET_DAY_VALUE(x) SUNXI_DATE_GET_DAY_VALUE(x) -+#define SUNXI_DATE_SET_MON_VALUE(x) SUNXI_SET(x, SUNXI_MASK_M, 8) -+#define SUNXI_DATE_SET_YEAR_VALUE(x, mask) SUNXI_SET(x, mask, 16) -+#define SUNXI_LEAP_SET_VALUE(x, shift) SUNXI_SET(x, SUNXI_MASK_LY, shift) -+ -+/* -+ * Set time values -+ */ -+#define SUNXI_TIME_SET_SEC_VALUE(x) SUNXI_TIME_GET_SEC_VALUE(x) -+#define SUNXI_TIME_SET_MIN_VALUE(x) SUNXI_SET(x, SUNXI_MASK_SM, 8) -+#define SUNXI_TIME_SET_HOUR_VALUE(x) SUNXI_SET(x, SUNXI_MASK_DH, 16) -+ -+/* -+ * Set alarm values -+ */ -+#define SUNXI_ALRM_SET_SEC_VALUE(x) SUNXI_ALRM_GET_SEC_VALUE(x) -+#define SUNXI_ALRM_SET_MIN_VALUE(x) SUNXI_SET(x, SUNXI_MASK_SM, 8) -+#define SUNXI_ALRM_SET_HOUR_VALUE(x) SUNXI_SET(x, SUNXI_MASK_DH, 16) -+#define SUNXI_ALRM_SET_DAY_VALUE(x) SUNXI_SET(x, SUNXI_MASK_D, 21) -+ -+/* -+ * Time unit conversions -+ */ -+#define SEC_IN_MIN 60 -+#define SEC_IN_HOUR (60 * SEC_IN_MIN) -+#define SEC_IN_DAY (24 * SEC_IN_HOUR) -+ -+/* -+ * The year parameter passed to the driver is usually an offset relative to -+ * the year 1900. This macro is used to convert this offset to another one -+ * relative to the minimum year allowed by the hardware. -+ */ -+#define SUNXI_YEAR_OFF(x) ((x)->min - 1900) -+ -+/* -+ * min and max year are arbitrary set considering the limited range of the -+ * hardware register field -+ */ -+struct sunxi_rtc_data_year { -+ unsigned int min; /* min year allowed */ -+ unsigned int max; /* max year allowed */ -+ unsigned int mask; /* mask for the year field */ -+ unsigned char leap_shift; /* bit shift to get the leap year */ -+}; -+ -+static struct sunxi_rtc_data_year data_year_param[] = { -+ [0] = { -+ .min = 2010, -+ .max = 2073, -+ .mask = 0x3f, -+ .leap_shift = 22, -+ }, -+ [1] = { -+ .min = 1970, -+ .max = 2225, -+ .mask = 0xff, -+ .leap_shift = 24, -+ }, -+}; -+ -+struct sunxi_rtc_dev { -+ struct rtc_device *rtc; -+ struct device *dev; -+ struct sunxi_rtc_data_year *data_year; -+ void __iomem *base; -+ int irq; -+}; -+ -+static irqreturn_t sunxi_rtc_alarmirq(int irq, void *id) -+{ -+ struct sunxi_rtc_dev *chip = (struct sunxi_rtc_dev *) id; -+ u32 val; -+ -+ val = readl(chip->base + SUNXI_ALRM_IRQ_STA); -+ -+ if (val & SUNXI_ALRM_IRQ_STA_CNT_IRQ_PEND) { -+ val |= SUNXI_ALRM_IRQ_STA_CNT_IRQ_PEND; -+ writel(val, chip->base + SUNXI_ALRM_IRQ_STA); -+ -+ rtc_update_irq(chip->rtc, 1, RTC_AF | RTC_IRQF); -+ -+ return IRQ_HANDLED; -+ } -+ -+ return IRQ_NONE; -+} -+ -+static void sunxi_rtc_setaie(int to, struct sunxi_rtc_dev *chip) -+{ -+ u32 alrm_val = 0; -+ u32 alrm_irq_val = 0; -+ -+ if (to) { -+ alrm_val = readl(chip->base + SUNXI_ALRM_EN); -+ alrm_val |= SUNXI_ALRM_EN_CNT_EN; -+ -+ alrm_irq_val = readl(chip->base + SUNXI_ALRM_IRQ_EN); -+ alrm_irq_val |= SUNXI_ALRM_IRQ_EN_CNT_IRQ_EN; -+ } else { -+ writel(SUNXI_ALRM_IRQ_STA_CNT_IRQ_PEND, -+ chip->base + SUNXI_ALRM_IRQ_STA); -+ } -+ -+ writel(alrm_val, chip->base + SUNXI_ALRM_EN); -+ writel(alrm_irq_val, chip->base + SUNXI_ALRM_IRQ_EN); -+} -+ -+static int sunxi_rtc_getalarm(struct device *dev, struct rtc_wkalrm *wkalrm) -+{ -+ struct sunxi_rtc_dev *chip = dev_get_drvdata(dev); -+ struct rtc_time *alrm_tm = &wkalrm->time; -+ u32 alrm; -+ u32 alrm_en; -+ u32 date; -+ -+ alrm = readl(chip->base + SUNXI_ALRM_DHMS); -+ date = readl(chip->base + SUNXI_RTC_YMD); -+ -+ alrm_tm->tm_sec = SUNXI_ALRM_GET_SEC_VALUE(alrm); -+ alrm_tm->tm_min = SUNXI_ALRM_GET_MIN_VALUE(alrm); -+ alrm_tm->tm_hour = SUNXI_ALRM_GET_HOUR_VALUE(alrm); -+ -+ alrm_tm->tm_mday = SUNXI_DATE_GET_DAY_VALUE(date); -+ alrm_tm->tm_mon = SUNXI_DATE_GET_MON_VALUE(date); -+ alrm_tm->tm_year = SUNXI_DATE_GET_YEAR_VALUE(date, -+ chip->data_year->mask); -+ -+ alrm_tm->tm_mon -= 1; -+ -+ /* -+ * switch from (data_year->min)-relative offset to -+ * a (1900)-relative one -+ */ -+ alrm_tm->tm_year += SUNXI_YEAR_OFF(chip->data_year); -+ -+ alrm_en = readl(chip->base + SUNXI_ALRM_IRQ_EN); -+ if (alrm_en & SUNXI_ALRM_EN_CNT_EN) -+ wkalrm->enabled = 1; -+ -+ return 0; -+} -+ -+static int sunxi_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm) -+{ -+ struct sunxi_rtc_dev *chip = dev_get_drvdata(dev); -+ u32 date, time; -+ -+ /* -+ * read again in case it changes -+ */ -+ do { -+ date = readl(chip->base + SUNXI_RTC_YMD); -+ time = readl(chip->base + SUNXI_RTC_HMS); -+ } while ((date != readl(chip->base + SUNXI_RTC_YMD)) || -+ (time != readl(chip->base + SUNXI_RTC_HMS))); -+ -+ rtc_tm->tm_sec = SUNXI_TIME_GET_SEC_VALUE(time); -+ rtc_tm->tm_min = SUNXI_TIME_GET_MIN_VALUE(time); -+ rtc_tm->tm_hour = SUNXI_TIME_GET_HOUR_VALUE(time); -+ -+ rtc_tm->tm_mday = SUNXI_DATE_GET_DAY_VALUE(date); -+ rtc_tm->tm_mon = SUNXI_DATE_GET_MON_VALUE(date); -+ rtc_tm->tm_year = SUNXI_DATE_GET_YEAR_VALUE(date, -+ chip->data_year->mask); -+ -+ rtc_tm->tm_mon -= 1; -+ -+ /* -+ * switch from (data_year->min)-relative offset to -+ * a (1900)-relative one -+ */ -+ rtc_tm->tm_year += SUNXI_YEAR_OFF(chip->data_year); -+ -+ return rtc_valid_tm(rtc_tm); -+} -+ -+static int sunxi_rtc_setalarm(struct device *dev, struct rtc_wkalrm *wkalrm) -+{ -+ struct sunxi_rtc_dev *chip = dev_get_drvdata(dev); -+ struct rtc_time *alrm_tm = &wkalrm->time; -+ struct rtc_time tm_now; -+ u32 alrm = 0; -+ unsigned long time_now = 0; -+ unsigned long time_set = 0; -+ unsigned long time_gap = 0; -+ unsigned long time_gap_day = 0; -+ unsigned long time_gap_hour = 0; -+ unsigned long time_gap_min = 0; -+ int ret = 0; -+ -+ ret = sunxi_rtc_gettime(dev, &tm_now); -+ if (ret < 0) { -+ dev_err(dev, "Error in getting time\n"); -+ return -EINVAL; -+ } -+ -+ rtc_tm_to_time(alrm_tm, &time_set); -+ rtc_tm_to_time(&tm_now, &time_now); -+ if (time_set <= time_now) { -+ dev_err(dev, "Date to set in the past\n"); -+ return -EINVAL; -+ } -+ -+ time_gap = time_set - time_now; -+ time_gap_day = time_gap / SEC_IN_DAY; -+ time_gap -= time_gap_day * SEC_IN_DAY; -+ time_gap_hour = time_gap / SEC_IN_HOUR; -+ time_gap -= time_gap_hour * SEC_IN_HOUR; -+ time_gap_min = time_gap / SEC_IN_MIN; -+ time_gap -= time_gap_min * SEC_IN_MIN; -+ -+ if (time_gap_day > 255) { -+ dev_err(dev, "Day must be in the range 0 - 255\n"); -+ return -EINVAL; -+ } -+ -+ sunxi_rtc_setaie(0, chip); -+ writel(0, chip->base + SUNXI_ALRM_DHMS); -+ usleep_range(100, 300); -+ -+ alrm = SUNXI_ALRM_SET_SEC_VALUE(time_gap) | -+ SUNXI_ALRM_SET_MIN_VALUE(time_gap_min) | -+ SUNXI_ALRM_SET_HOUR_VALUE(time_gap_hour) | -+ SUNXI_ALRM_SET_DAY_VALUE(time_gap_day); -+ writel(alrm, chip->base + SUNXI_ALRM_DHMS); -+ -+ writel(0, chip->base + SUNXI_ALRM_IRQ_EN); -+ writel(SUNXI_ALRM_IRQ_EN_CNT_IRQ_EN, chip->base + SUNXI_ALRM_IRQ_EN); -+ -+ sunxi_rtc_setaie(wkalrm->enabled, chip); -+ -+ return 0; -+} -+ -+static int sunxi_rtc_wait(struct sunxi_rtc_dev *chip, int offset, -+ unsigned int mask, unsigned int ms_timeout) -+{ -+ const unsigned long timeout = jiffies + msecs_to_jiffies(ms_timeout); -+ u32 reg; -+ -+ do { -+ reg = readl(chip->base + offset); -+ reg &= mask; -+ -+ if (reg == mask) -+ return 0; -+ -+ } while (time_before(jiffies, timeout)); -+ -+ return -ETIMEDOUT; -+} -+ -+static int sunxi_rtc_settime(struct device *dev, struct rtc_time *rtc_tm) -+{ -+ struct sunxi_rtc_dev *chip = dev_get_drvdata(dev); -+ u32 date = 0; -+ u32 time = 0; -+ int year; -+ -+ /* -+ * the input rtc_tm->tm_year is the offset relative to 1900. We use -+ * the SUNXI_YEAR_OFF macro to rebase it with respect to the min year -+ * allowed by the hardware -+ */ -+ -+ year = rtc_tm->tm_year + 1900; -+ if (year < chip->data_year->min || year > chip->data_year->max) { -+ dev_err(dev, "rtc only supports year in range %d - %d\n", -+ chip->data_year->min, chip->data_year->max); -+ return -EINVAL; -+ } -+ -+ rtc_tm->tm_year -= SUNXI_YEAR_OFF(chip->data_year); -+ rtc_tm->tm_mon += 1; -+ -+ date = SUNXI_DATE_SET_DAY_VALUE(rtc_tm->tm_mday) | -+ SUNXI_DATE_SET_MON_VALUE(rtc_tm->tm_mon) | -+ SUNXI_DATE_SET_YEAR_VALUE(rtc_tm->tm_year, -+ chip->data_year->mask); -+ -+ if (is_leap_year(year)) -+ date |= SUNXI_LEAP_SET_VALUE(1, chip->data_year->leap_shift); -+ -+ time = SUNXI_TIME_SET_SEC_VALUE(rtc_tm->tm_sec) | -+ SUNXI_TIME_SET_MIN_VALUE(rtc_tm->tm_min) | -+ SUNXI_TIME_SET_HOUR_VALUE(rtc_tm->tm_hour); -+ -+ writel(0, chip->base + SUNXI_RTC_HMS); -+ writel(0, chip->base + SUNXI_RTC_YMD); -+ -+ writel(time, chip->base + SUNXI_RTC_HMS); -+ -+ /* -+ * After writing the RTC HH-MM-SS register, the -+ * SUNXI_LOSC_CTRL_RTC_HMS_ACC bit is set and it will not -+ * be cleared until the real writing operation is finished -+ */ -+ -+ if (sunxi_rtc_wait(chip, SUNXI_LOSC_CTRL, -+ SUNXI_LOSC_CTRL_RTC_HMS_ACC, 50)) { -+ dev_err(dev, "Failed to set rtc time.\n"); -+ return -1; -+ } -+ -+ writel(date, chip->base + SUNXI_RTC_YMD); -+ -+ /* -+ * After writing the RTC YY-MM-DD register, the -+ * SUNXI_LOSC_CTRL_RTC_YMD_ACC bit is set and it will not -+ * be cleared until the real writing operation is finished -+ */ -+ -+ if (sunxi_rtc_wait(chip, SUNXI_LOSC_CTRL, -+ SUNXI_LOSC_CTRL_RTC_YMD_ACC, 50)) { -+ dev_err(dev, "Failed to set rtc time.\n"); -+ return -1; -+ } -+ -+ return 0; -+} -+ -+static int sunxi_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled) -+{ -+ struct sunxi_rtc_dev *chip = dev_get_drvdata(dev); -+ -+ if (!enabled) -+ sunxi_rtc_setaie(enabled, chip); -+ -+ return 0; -+} -+ -+static const struct rtc_class_ops sunxi_rtc_ops = { -+ .read_time = sunxi_rtc_gettime, -+ .set_time = sunxi_rtc_settime, -+ .read_alarm = sunxi_rtc_getalarm, -+ .set_alarm = sunxi_rtc_setalarm, -+ .alarm_irq_enable = sunxi_rtc_alarm_irq_enable -+}; -+ -+static const struct of_device_id sunxi_rtc_dt_ids[] = { -+ { .compatible = "allwinner,sun4i-rtc", .data = &data_year_param[0] }, -+ { .compatible = "allwinner,sun7i-a20-rtc", .data = &data_year_param[1] }, -+ { /* sentinel */ }, -+}; -+MODULE_DEVICE_TABLE(of, sunxi_rtc_dt_ids); -+ -+static int sunxi_rtc_probe(struct platform_device *pdev) -+{ -+ struct sunxi_rtc_dev *chip; -+ struct resource *res; -+ const struct of_device_id *of_id; -+ int ret; -+ -+ chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL); -+ if (!chip) -+ return -ENOMEM; -+ -+ platform_set_drvdata(pdev, chip); -+ chip->dev = &pdev->dev; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ chip->base = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(chip->base)) -+ return PTR_ERR(chip->base); -+ -+ chip->irq = platform_get_irq(pdev, 0); -+ if (chip->irq < 0) { -+ dev_err(&pdev->dev, "No IRQ resource\n"); -+ return chip->irq; -+ } -+ ret = devm_request_irq(&pdev->dev, chip->irq, sunxi_rtc_alarmirq, -+ 0, dev_name(&pdev->dev), chip); -+ if (ret) { -+ dev_err(&pdev->dev, "Could not request IRQ\n"); -+ return ret; -+ } -+ -+ of_id = of_match_device(sunxi_rtc_dt_ids, &pdev->dev); -+ if (!of_id) { -+ dev_err(&pdev->dev, "Unable to setup RTC data\n"); -+ return -ENODEV; -+ } -+ chip->data_year = (struct sunxi_rtc_data_year *) of_id->data; -+ -+ /* clear the alarm count value */ -+ writel(0, chip->base + SUNXI_ALRM_DHMS); -+ -+ /* disable alarm, not generate irq pending */ -+ writel(0, chip->base + SUNXI_ALRM_EN); -+ -+ /* disable alarm week/cnt irq, unset to cpu */ -+ writel(0, chip->base + SUNXI_ALRM_IRQ_EN); -+ -+ /* clear alarm week/cnt irq pending */ -+ writel(SUNXI_ALRM_IRQ_STA_CNT_IRQ_PEND, chip->base + -+ SUNXI_ALRM_IRQ_STA); -+ -+ chip->rtc = rtc_device_register("rtc-sunxi", &pdev->dev, -+ &sunxi_rtc_ops, THIS_MODULE); -+ if (IS_ERR(chip->rtc)) { -+ dev_err(&pdev->dev, "unable to register device\n"); -+ return PTR_ERR(chip->rtc); -+ } -+ -+ dev_info(&pdev->dev, "RTC enabled\n"); -+ -+ return 0; -+} -+ -+static int sunxi_rtc_remove(struct platform_device *pdev) -+{ -+ struct sunxi_rtc_dev *chip = platform_get_drvdata(pdev); -+ -+ rtc_device_unregister(chip->rtc); -+ -+ return 0; -+} -+ -+static struct platform_driver sunxi_rtc_driver = { -+ .probe = sunxi_rtc_probe, -+ .remove = sunxi_rtc_remove, -+ .driver = { -+ .name = "sunxi-rtc", -+ .owner = THIS_MODULE, -+ .of_match_table = sunxi_rtc_dt_ids, -+ }, -+}; -+ -+module_platform_driver(sunxi_rtc_driver); -+ -+MODULE_DESCRIPTION("sunxi RTC driver"); -+MODULE_AUTHOR("Carlo Caione "); -+MODULE_LICENSE("GPL"); diff --git a/target/linux/sunxi/patches-3.13/141-dt-sun47i-add-rtc.patch b/target/linux/sunxi/patches-3.13/141-dt-sun47i-add-rtc.patch deleted file mode 100644 index 8e051c8782..0000000000 --- a/target/linux/sunxi/patches-3.13/141-dt-sun47i-add-rtc.patch +++ /dev/null @@ -1,44 +0,0 @@ -From b15b9f68606134222f7aff5120c8ef70ffab92b8 Mon Sep 17 00:00:00 2001 -From: Carlo Caione -Date: Wed, 16 Oct 2013 20:30:26 +0200 -Subject: [PATCH] ARM: dts: sun4i/sun7i: add RTC node - -Add the RTC node to DTS for Allwinner A10 and Allwinner A20. - -Signed-off-by: Carlo Caione -Signed-off-by: Maxime Ripard ---- - arch/arm/boot/dts/sun4i-a10.dtsi | 6 ++++++ - arch/arm/boot/dts/sun7i-a20.dtsi | 6 ++++++ - 2 files changed, 12 insertions(+) - ---- a/arch/arm/boot/dts/sun4i-a10.dtsi -+++ b/arch/arm/boot/dts/sun4i-a10.dtsi -@@ -412,6 +412,12 @@ - reg = <0x01c20c90 0x10>; - }; - -+ rtc: rtc@01c20d00 { -+ compatible = "allwinner,sun4i-rtc"; -+ reg = <0x01c20d00 0x20>; -+ interrupts = <24>; -+ }; -+ - sid: eeprom@01c23800 { - compatible = "allwinner,sun4i-sid"; - reg = <0x01c23800 0x10>; ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -416,6 +416,12 @@ - reg = <0x01c20c90 0x10>; - }; - -+ rtc: rtc@01c20d00 { -+ compatible = "allwinner,sun7i-a20-rtc"; -+ reg = <0x01c20d00 0x20>; -+ interrupts = <0 24 1>; -+ }; -+ - sid: eeprom@01c23800 { - compatible = "allwinner,sun7i-a20-sid"; - reg = <0x01c23800 0x200>; diff --git a/target/linux/sunxi/patches-3.13/145-clksrc-add-hstimer.patch b/target/linux/sunxi/patches-3.13/145-clksrc-add-hstimer.patch deleted file mode 100644 index 552ef00537..0000000000 --- a/target/linux/sunxi/patches-3.13/145-clksrc-add-hstimer.patch +++ /dev/null @@ -1,282 +0,0 @@ -From 3bf30f6381f9287eb99ce096bf2fa327a69c8a71 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Thu, 7 Nov 2013 12:01:48 +0100 -Subject: [PATCH] clocksource: Add Allwinner SoCs HS timers driver -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Most of the Allwinner SoCs (at this time, all but the A10) also have a -High Speed timers that are not using the 24MHz oscillator as a source -but rather the AHB clock running much faster. - -The IP is slightly different between the A10s/A13 and the one used in -the A20/A31, since the latter have 4 timers available, while the former -have only 2 of them. - -[dlezcano] : Fixed conflict with b788beda "Order Kconfig options - alphabetically" - -Signed-off-by: Maxime Ripard -Tested-by: Emilio López -Signed-off-by: Daniel Lezcano ---- - .../bindings/timer/allwinner,sun5i-a13-hstimer.txt | 22 +++ - arch/arm/mach-sunxi/Kconfig | 1 + - drivers/clocksource/Kconfig | 4 + - drivers/clocksource/Makefile | 1 + - drivers/clocksource/timer-sun5i.c | 192 +++++++++++++++++++++ - 5 files changed, 220 insertions(+) - create mode 100644 Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt - create mode 100644 drivers/clocksource/timer-sun5i.c - ---- /dev/null -+++ b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt -@@ -0,0 +1,22 @@ -+Allwinner SoCs High Speed Timer Controller -+ -+Required properties: -+ -+- compatible : should be "allwinner,sun5i-a13-hstimer" or -+ "allwinner,sun7i-a20-hstimer" -+- reg : Specifies base physical address and size of the registers. -+- interrupts : The interrupts of these timers (2 for the sun5i IP, 4 for the sun7i -+ one) -+- clocks: phandle to the source clock (usually the AHB clock) -+ -+Example: -+ -+timer@01c60000 { -+ compatible = "allwinner,sun7i-a20-hstimer"; -+ reg = <0x01c60000 0x1000>; -+ interrupts = <0 51 1>, -+ <0 52 1>, -+ <0 53 1>, -+ <0 54 1>; -+ clocks = <&ahb1_gates 19>; -+}; ---- a/arch/arm/mach-sunxi/Kconfig -+++ b/arch/arm/mach-sunxi/Kconfig -@@ -13,3 +13,4 @@ config ARCH_SUNXI - select PINCTRL_SUNXI - select SPARSE_IRQ - select SUN4I_TIMER -+ select SUN5I_HSTIMER ---- a/drivers/clocksource/Kconfig -+++ b/drivers/clocksource/Kconfig -@@ -37,6 +37,10 @@ config SUN4I_TIMER - select CLKSRC_MMIO - bool - -+config SUN5I_HSTIMER -+ select CLKSRC_MMIO -+ bool -+ - config VT8500_TIMER - bool - ---- a/drivers/clocksource/Makefile -+++ b/drivers/clocksource/Makefile -@@ -22,6 +22,7 @@ obj-$(CONFIG_ARCH_MOXART) += moxart_time - obj-$(CONFIG_ARCH_MXS) += mxs_timer.o - obj-$(CONFIG_ARCH_PRIMA2) += timer-prima2.o - obj-$(CONFIG_SUN4I_TIMER) += sun4i_timer.o -+obj-$(CONFIG_SUN5I_HSTIMER) += timer-sun5i.o - obj-$(CONFIG_ARCH_TEGRA) += tegra20_timer.o - obj-$(CONFIG_VT8500_TIMER) += vt8500_timer.o - obj-$(CONFIG_ARCH_NSPIRE) += zevio-timer.o ---- /dev/null -+++ b/drivers/clocksource/timer-sun5i.c -@@ -0,0 +1,192 @@ -+/* -+ * Allwinner SoCs hstimer driver. -+ * -+ * Copyright (C) 2013 Maxime Ripard -+ * -+ * Maxime Ripard -+ * -+ * This file is licensed under the terms of the GNU General Public -+ * License version 2. This program is licensed "as is" without any -+ * warranty of any kind, whether express or implied. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define TIMER_IRQ_EN_REG 0x00 -+#define TIMER_IRQ_EN(val) BIT(val) -+#define TIMER_IRQ_ST_REG 0x04 -+#define TIMER_CTL_REG(val) (0x20 * (val) + 0x10) -+#define TIMER_CTL_ENABLE BIT(0) -+#define TIMER_CTL_RELOAD BIT(1) -+#define TIMER_CTL_CLK_PRES(val) (((val) & 0x7) << 4) -+#define TIMER_CTL_ONESHOT BIT(7) -+#define TIMER_INTVAL_LO_REG(val) (0x20 * (val) + 0x14) -+#define TIMER_INTVAL_HI_REG(val) (0x20 * (val) + 0x18) -+#define TIMER_CNTVAL_LO_REG(val) (0x20 * (val) + 0x1c) -+#define TIMER_CNTVAL_HI_REG(val) (0x20 * (val) + 0x20) -+ -+#define TIMER_SYNC_TICKS 3 -+ -+static void __iomem *timer_base; -+static u32 ticks_per_jiffy; -+ -+/* -+ * When we disable a timer, we need to wait at least for 2 cycles of -+ * the timer source clock. We will use for that the clocksource timer -+ * that is already setup and runs at the same frequency than the other -+ * timers, and we never will be disabled. -+ */ -+static void sun5i_clkevt_sync(void) -+{ -+ u32 old = readl(timer_base + TIMER_CNTVAL_LO_REG(1)); -+ -+ while ((old - readl(timer_base + TIMER_CNTVAL_LO_REG(1))) < TIMER_SYNC_TICKS) -+ cpu_relax(); -+} -+ -+static void sun5i_clkevt_time_stop(u8 timer) -+{ -+ u32 val = readl(timer_base + TIMER_CTL_REG(timer)); -+ writel(val & ~TIMER_CTL_ENABLE, timer_base + TIMER_CTL_REG(timer)); -+ -+ sun5i_clkevt_sync(); -+} -+ -+static void sun5i_clkevt_time_setup(u8 timer, u32 delay) -+{ -+ writel(delay, timer_base + TIMER_INTVAL_LO_REG(timer)); -+} -+ -+static void sun5i_clkevt_time_start(u8 timer, bool periodic) -+{ -+ u32 val = readl(timer_base + TIMER_CTL_REG(timer)); -+ -+ if (periodic) -+ val &= ~TIMER_CTL_ONESHOT; -+ else -+ val |= TIMER_CTL_ONESHOT; -+ -+ writel(val | TIMER_CTL_ENABLE | TIMER_CTL_RELOAD, -+ timer_base + TIMER_CTL_REG(timer)); -+} -+ -+static void sun5i_clkevt_mode(enum clock_event_mode mode, -+ struct clock_event_device *clk) -+{ -+ switch (mode) { -+ case CLOCK_EVT_MODE_PERIODIC: -+ sun5i_clkevt_time_stop(0); -+ sun5i_clkevt_time_setup(0, ticks_per_jiffy); -+ sun5i_clkevt_time_start(0, true); -+ break; -+ case CLOCK_EVT_MODE_ONESHOT: -+ sun5i_clkevt_time_stop(0); -+ sun5i_clkevt_time_start(0, false); -+ break; -+ case CLOCK_EVT_MODE_UNUSED: -+ case CLOCK_EVT_MODE_SHUTDOWN: -+ default: -+ sun5i_clkevt_time_stop(0); -+ break; -+ } -+} -+ -+static int sun5i_clkevt_next_event(unsigned long evt, -+ struct clock_event_device *unused) -+{ -+ sun5i_clkevt_time_stop(0); -+ sun5i_clkevt_time_setup(0, evt - TIMER_SYNC_TICKS); -+ sun5i_clkevt_time_start(0, false); -+ -+ return 0; -+} -+ -+static struct clock_event_device sun5i_clockevent = { -+ .name = "sun5i_tick", -+ .rating = 340, -+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, -+ .set_mode = sun5i_clkevt_mode, -+ .set_next_event = sun5i_clkevt_next_event, -+}; -+ -+ -+static irqreturn_t sun5i_timer_interrupt(int irq, void *dev_id) -+{ -+ struct clock_event_device *evt = (struct clock_event_device *)dev_id; -+ -+ writel(0x1, timer_base + TIMER_IRQ_ST_REG); -+ evt->event_handler(evt); -+ -+ return IRQ_HANDLED; -+} -+ -+static struct irqaction sun5i_timer_irq = { -+ .name = "sun5i_timer0", -+ .flags = IRQF_TIMER | IRQF_IRQPOLL, -+ .handler = sun5i_timer_interrupt, -+ .dev_id = &sun5i_clockevent, -+}; -+ -+static u32 sun5i_timer_sched_read(void) -+{ -+ return ~readl(timer_base + TIMER_CNTVAL_LO_REG(1)); -+} -+ -+static void __init sun5i_timer_init(struct device_node *node) -+{ -+ unsigned long rate; -+ struct clk *clk; -+ int ret, irq; -+ u32 val; -+ -+ timer_base = of_iomap(node, 0); -+ if (!timer_base) -+ panic("Can't map registers"); -+ -+ irq = irq_of_parse_and_map(node, 0); -+ if (irq <= 0) -+ panic("Can't parse IRQ"); -+ -+ clk = of_clk_get(node, 0); -+ if (IS_ERR(clk)) -+ panic("Can't get timer clock"); -+ clk_prepare_enable(clk); -+ rate = clk_get_rate(clk); -+ -+ writel(~0, timer_base + TIMER_INTVAL_LO_REG(1)); -+ writel(TIMER_CTL_ENABLE | TIMER_CTL_RELOAD, -+ timer_base + TIMER_CTL_REG(1)); -+ -+ setup_sched_clock(sun5i_timer_sched_read, 32, rate); -+ clocksource_mmio_init(timer_base + TIMER_CNTVAL_LO_REG(1), node->name, -+ rate, 340, 32, clocksource_mmio_readl_down); -+ -+ ticks_per_jiffy = DIV_ROUND_UP(rate, HZ); -+ -+ ret = setup_irq(irq, &sun5i_timer_irq); -+ if (ret) -+ pr_warn("failed to setup irq %d\n", irq); -+ -+ /* Enable timer0 interrupt */ -+ val = readl(timer_base + TIMER_IRQ_EN_REG); -+ writel(val | TIMER_IRQ_EN(0), timer_base + TIMER_IRQ_EN_REG); -+ -+ sun5i_clockevent.cpumask = cpu_possible_mask; -+ sun5i_clockevent.irq = irq; -+ -+ clockevents_config_and_register(&sun5i_clockevent, rate, -+ TIMER_SYNC_TICKS, 0xffffffff); -+} -+CLOCKSOURCE_OF_DECLARE(sun5i_a13, "allwinner,sun5i-a13-hstimer", -+ sun5i_timer_init); -+CLOCKSOURCE_OF_DECLARE(sun7i_a20, "allwinner,sun7i-a20-hstimer", -+ sun5i_timer_init); diff --git a/target/linux/sunxi/patches-3.13/146-1-dt-sun5i-a10s-add-hstimer.patch b/target/linux/sunxi/patches-3.13/146-1-dt-sun5i-a10s-add-hstimer.patch deleted file mode 100644 index b583a5940c..0000000000 --- a/target/linux/sunxi/patches-3.13/146-1-dt-sun5i-a10s-add-hstimer.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 5ace5467690055b1772dcac69dd1377735b8a34b Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Thu, 7 Nov 2013 12:01:48 +0100 -Subject: [PATCH] ARM: sun5i: a10s: Add support for the High Speed Timers -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -The Allwinner A10s has support for two high speed timers. Now that we -have a driver to support it, we can enable them in the device tree. - -Signed-off-by: Maxime Ripard -Tested-by: Emilio López -Signed-off-by: Daniel Lezcano ---- - arch/arm/boot/dts/sun5i-a10s.dtsi | 7 +++++++ - 1 file changed, 7 insertions(+) - ---- a/arch/arm/boot/dts/sun5i-a10s.dtsi -+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi -@@ -454,5 +454,12 @@ - clock-frequency = <100000>; - status = "disabled"; - }; -+ -+ timer@01c60000 { -+ compatible = "allwinner,sun5i-a13-hstimer"; -+ reg = <0x01c60000 0x1000>; -+ interrupts = <82>, <83>; -+ clocks = <&ahb_gates 28>; -+ }; - }; - }; diff --git a/target/linux/sunxi/patches-3.13/146-2-dt-sun5i-a13-add-hstimer.patch b/target/linux/sunxi/patches-3.13/146-2-dt-sun5i-a13-add-hstimer.patch deleted file mode 100644 index 629073bca4..0000000000 --- a/target/linux/sunxi/patches-3.13/146-2-dt-sun5i-a13-add-hstimer.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 22a3eff19679e0e592e061201690670a2f5fdba7 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Thu, 7 Nov 2013 12:01:48 +0100 -Subject: [PATCH] ARM: sun5i: a13: Add support for the High Speed Timers -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -The Allwinner A13 has support for two high speed timers. Now that we -have a driver to support it, we can enable them in the device tree. - -Signed-off-by: Maxime Ripard -Tested-by: Emilio López -Signed-off-by: Daniel Lezcano ---- - arch/arm/boot/dts/sun5i-a13.dtsi | 7 +++++++ - 1 file changed, 7 insertions(+) - ---- a/arch/arm/boot/dts/sun5i-a13.dtsi -+++ b/arch/arm/boot/dts/sun5i-a13.dtsi -@@ -391,5 +391,12 @@ - clock-frequency = <100000>; - status = "disabled"; - }; -+ -+ timer@01c60000 { -+ compatible = "allwinner,sun5i-a13-hstimer"; -+ reg = <0x01c60000 0x1000>; -+ interrupts = <82>, <83>; -+ clocks = <&ahb_gates 28>; -+ }; - }; - }; diff --git a/target/linux/sunxi/patches-3.13/146-3-dt-sun7i-a20-add-hstimer.patch b/target/linux/sunxi/patches-3.13/146-3-dt-sun7i-a20-add-hstimer.patch deleted file mode 100644 index dc9ce4f9e9..0000000000 --- a/target/linux/sunxi/patches-3.13/146-3-dt-sun7i-a20-add-hstimer.patch +++ /dev/null @@ -1,43 +0,0 @@ -From 6c23e1fa6bd220b8f5665c150c83d4c016d95482 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Thu, 7 Nov 2013 12:01:48 +0100 -Subject: [PATCH] ARM: sun7i: a20: Add support for the High Speed Timers -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -The Allwinner A20 has support for four high speed timers. Apart for the -number of timers (4 vs 2), it's basically the same logic than the high -speed timers found in the sun5i chips. - -Now that we have a driver to support it, we can enable them in the -device tree. - -[dlezcano] : Fixed conflict with 428abbb8 "Enable the I2C controllers" - -Signed-off-by: Maxime Ripard -Tested-by: Emilio López -Signed-off-by: Daniel Lezcano ---- - arch/arm/boot/dts/sun7i-a20.dtsi | 10 ++++++++++ - 1 file changed, 10 insertions(+) - ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -552,6 +552,16 @@ - status = "disabled"; - }; - -+ hstimer@01c60000 { -+ compatible = "allwinner,sun7i-a20-hstimer"; -+ reg = <0x01c60000 0x1000>; -+ interrupts = <0 81 4>, -+ <0 82 4>, -+ <0 83 4>, -+ <0 84 4>; -+ clocks = <&ahb_gates 28>; -+ }; -+ - gic: interrupt-controller@01c81000 { - compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; - reg = <0x01c81000 0x1000>, diff --git a/target/linux/sunxi/patches-3.13/146-4-dt-sun6i-a31-add-hstimer.patch b/target/linux/sunxi/patches-3.13/146-4-dt-sun6i-a31-add-hstimer.patch deleted file mode 100644 index 7014b48bc9..0000000000 --- a/target/linux/sunxi/patches-3.13/146-4-dt-sun6i-a31-add-hstimer.patch +++ /dev/null @@ -1,37 +0,0 @@ -From 28a9c5d93113cab73dd3a4b4a74a983151c08b9d Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Fri, 20 Dec 2013 22:41:09 +0100 -Subject: [PATCH] ARM: sun6i: a31: Add support for the High Speed Timers - -The Allwinner A31 has support for four high speed timers. Apart for the -number of timers (4 vs 2), it's basically the same logic than the high -speed timers found in the sun5i chips. - -Now that we have a driver to support it, we can enable them in the -device tree. - -Signed-off-by: Maxime Ripard ---- - arch/arm/boot/dts/sun6i-a31.dtsi | 11 +++++++++++ - 1 file changed, 11 insertions(+) - ---- a/arch/arm/boot/dts/sun6i-a31.dtsi -+++ b/arch/arm/boot/dts/sun6i-a31.dtsi -@@ -312,6 +312,17 @@ - status = "disabled"; - }; - -+ hstimer@01c60000 { -+ compatible = "allwinner,sun7i-a20-hstimer"; -+ reg = <0x01c60000 0x1000>; -+ interrupts = <0 51 4>, -+ <0 52 4>, -+ <0 53 4>, -+ <0 54 4>; -+ clocks = <&ahb1_gates 19>; -+ resets = <&ahb1_rst 19>; -+ }; -+ - gic: interrupt-controller@01c81000 { - compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; - reg = <0x01c81000 0x1000>, diff --git a/target/linux/sunxi/patches-3.13/150-1-dt-sun7i-add-gmac-clock-node.patch b/target/linux/sunxi/patches-3.13/150-1-dt-sun7i-add-gmac-clock-node.patch deleted file mode 100644 index 16c0aa0809..0000000000 --- a/target/linux/sunxi/patches-3.13/150-1-dt-sun7i-add-gmac-clock-node.patch +++ /dev/null @@ -1,56 +0,0 @@ -From bc7a0478e6dac1304fdfdb6f3056f438b632da62 Mon Sep 17 00:00:00 2001 -From: Chen-Yu Tsai -Date: Mon, 10 Feb 2014 18:35:48 +0800 -Subject: [PATCH] ARM: dts: sun7i: Add GMAC clock node to sun7i DTSI - -The GMAC uses 1 of 2 sources for its transmit clock, depending on the -PHY interface mode. Add both sources as dummy clocks, and as parents -to the GMAC clock node. - -Signed-off-by: Chen-Yu Tsai ---- - arch/arm/boot/dts/sun7i-a20.dtsi | 28 ++++++++++++++++++++++++++++ - 1 file changed, 28 insertions(+) - -diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi -index cefd7ac..7d98edc 100644 ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -322,6 +322,34 @@ - }; - - /* -+ * The following two are dummy clocks, placeholders used in the gmac_tx -+ * clock. The gmac driver will choose one parent depending on the PHY -+ * interface mode, using clk_set_rate auto-reparenting. -+ * The actual TX clock rate is not controlled by the gmac_tx clock. -+ */ -+ mii_phy_tx_clk: clk@2 { -+ #clock-cells = <0>; -+ compatible = "fixed-clock"; -+ clock-frequency = <25000000>; -+ clock-output-names = "mii_phy_tx"; -+ }; -+ -+ gmac_int_tx_clk: clk@3 { -+ #clock-cells = <0>; -+ compatible = "fixed-clock"; -+ clock-frequency = <125000000>; -+ clock-output-names = "gmac_int_tx"; -+ }; -+ -+ gmac_tx_clk: clk@01c20164 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun7i-a20-gmac-clk"; -+ reg = <0x01c20164 0x4>; -+ clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>; -+ clock-output-names = "gmac_tx"; -+ }; -+ -+ /* - * Dummy clock used by output clocks - */ - osc24M_32k: clk@1 { --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/150-2-dt-sun7i-add-gmac-ctrler-node.patch b/target/linux/sunxi/patches-3.13/150-2-dt-sun7i-add-gmac-ctrler-node.patch deleted file mode 100644 index 5d68104066..0000000000 --- a/target/linux/sunxi/patches-3.13/150-2-dt-sun7i-add-gmac-ctrler-node.patch +++ /dev/null @@ -1,39 +0,0 @@ -From 7584e81f6d9fecf0ad6e2854654b183432adb918 Mon Sep 17 00:00:00 2001 -From: Chen-Yu Tsai -Date: Mon, 10 Feb 2014 18:35:49 +0800 -Subject: [PATCH] ARM: dts: sun7i: Add GMAC controller node to sun7i DTSI - -Signed-off-by: Chen-Yu Tsai ---- - arch/arm/boot/dts/sun7i-a20.dtsi | 15 +++++++++++++++ - 1 file changed, 15 insertions(+) - -diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi -index 7d98edc..87eab0d 100644 ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -645,6 +645,21 @@ - status = "disabled"; - }; - -+ gmac: ethernet@01c50000 { -+ compatible = "allwinner,sun7i-a20-gmac"; -+ reg = <0x01c50000 0x10000>; -+ interrupts = <0 85 4>; -+ interrupt-names = "macirq"; -+ clocks = <&ahb_gates 49>, <&gmac_tx_clk>; -+ clock-names = "stmmaceth", "allwinner_gmac_tx"; -+ snps,pbl = <2>; -+ snps,fixed-burst; -+ snps,force_sf_dma_mode; -+ status = "disabled"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ }; -+ - hstimer@01c60000 { - compatible = "allwinner,sun7i-a20-hstimer"; - reg = <0x01c60000 0x1000>; --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/150-3-dt-sun7i-gmac-add-pinmuxing.patch b/target/linux/sunxi/patches-3.13/150-3-dt-sun7i-gmac-add-pinmuxing.patch deleted file mode 100644 index 01523f0d8c..0000000000 --- a/target/linux/sunxi/patches-3.13/150-3-dt-sun7i-gmac-add-pinmuxing.patch +++ /dev/null @@ -1,53 +0,0 @@ -From 249ac8d24efdc07f521b796b96796ffa55abe0a5 Mon Sep 17 00:00:00 2001 -From: Chen-Yu Tsai -Date: Mon, 10 Feb 2014 18:35:50 +0800 -Subject: [PATCH] ARM: dts: sun7i: Add pin muxing options for the GMAC - -The A20 has EMAC and GMAC muxed on the same pins. -Add pin sets with gmac function for MII and RGMII mode to the DTSI. - -Signed-off-by: Chen-Yu Tsai ---- - arch/arm/boot/dts/sun7i-a20.dtsi | 26 ++++++++++++++++++++++++++ - 1 file changed, 26 insertions(+) - -diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi -index 87eab0d..9bb6fdf 100644 ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -484,6 +484,32 @@ - allwinner,drive = <0>; - allwinner,pull = <0>; - }; -+ -+ gmac_pins_mii_a: gmac_mii@0 { -+ allwinner,pins = "PA0", "PA1", "PA2", -+ "PA3", "PA4", "PA5", "PA6", -+ "PA7", "PA8", "PA9", "PA10", -+ "PA11", "PA12", "PA13", "PA14", -+ "PA15", "PA16"; -+ allwinner,function = "gmac"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ gmac_pins_rgmii_a: gmac_rgmii@0 { -+ allwinner,pins = "PA0", "PA1", "PA2", -+ "PA3", "PA4", "PA5", "PA6", -+ "PA7", "PA8", "PA10", -+ "PA11", "PA12", "PA13", -+ "PA15", "PA16"; -+ allwinner,function = "gmac"; -+ /* -+ * data lines in RGMII mode use DDR mode -+ * and need a higher signal drive strength -+ */ -+ allwinner,drive = <3>; -+ allwinner,pull = <0>; -+ }; - }; - - timer@01c20c00 { --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/151-0-stmmac-fixup-0.patch b/target/linux/sunxi/patches-3.13/151-0-stmmac-fixup-0.patch deleted file mode 100644 index 2c908ac16d..0000000000 --- a/target/linux/sunxi/patches-3.13/151-0-stmmac-fixup-0.patch +++ /dev/null @@ -1,50 +0,0 @@ -From 33ba4079ea8c611c1aeca34f2d6d53a8214c14c5 Mon Sep 17 00:00:00 2001 -From: Rashika Kheria -Date: Thu, 19 Dec 2013 14:19:44 +0530 -Subject: [PATCH] drivers: net: Mark functions as static in stmmac_platform.c -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This patch marks the function stmmac_pltfr_freeze() and -stmmac_pltfr_restore() in stmmac_platform.c as static because they are -not used outside this file. - -Thus, it also removes the following warnings in -ethernet/stmicro/stmmac/stmmac_platform.c: - -drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c:222:5: warning: no previous prototype for ‘stmmac_pltfr_freeze’ [-Wmissing-prototypes] -drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c:236:5: warning: no previous prototype for ‘stmmac_pltfr_restore’ [-Wmissing-prototypes] - -Signed-off-by: Rashika Kheria -Reviewed-by: Josh Triplett -Signed-off-by: David S. Miller ---- - drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c -index 51c9069..38bd1f4 100644 ---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c -+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c -@@ -219,7 +219,7 @@ static int stmmac_pltfr_resume(struct device *dev) - return stmmac_resume(ndev); - } - --int stmmac_pltfr_freeze(struct device *dev) -+static int stmmac_pltfr_freeze(struct device *dev) - { - int ret; - struct plat_stmmacenet_data *plat_dat = dev_get_platdata(dev); -@@ -233,7 +233,7 @@ int stmmac_pltfr_freeze(struct device *dev) - return ret; - } - --int stmmac_pltfr_restore(struct device *dev) -+static int stmmac_pltfr_restore(struct device *dev) - { - struct plat_stmmacenet_data *plat_dat = dev_get_platdata(dev); - struct net_device *ndev = dev_get_drvdata(dev); --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/151-1-stmmac-fixup-1.patch b/target/linux/sunxi/patches-3.13/151-1-stmmac-fixup-1.patch deleted file mode 100644 index efd7aff3ba..0000000000 --- a/target/linux/sunxi/patches-3.13/151-1-stmmac-fixup-1.patch +++ /dev/null @@ -1,77 +0,0 @@ -From 9cbadf094d9d479413dc8cfa77dff9e732184337 Mon Sep 17 00:00:00 2001 -From: Srinivas Kandagatla -Date: Thu, 16 Jan 2014 10:51:43 +0000 -Subject: [PATCH] net: stmmac: support max-speed device tree property - -This patch adds support to "max-speed" property which is a standard -Ethernet device tree property. max-speed specifies maximum speed -(specified in megabits per second) supported the device. - -Depending on the clocking schemes some of the boards can only support -few link speeds, so having a way to limit the link speed in the mac -driver would allow such setups to work reliably. - -Without this patch there is no way to tell the driver to limit the -link speed. - -Signed-off-by: Srinivas Kandagatla -Acked-by: Giuseppe Cavallaro -Signed-off-by: David S. Miller ---- - drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 4 +++- - drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 4 ++++ - include/linux/stmmac.h | 1 + - 3 files changed, 8 insertions(+), 1 deletion(-) - -diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c -index ecdc8ab..15192c0 100644 ---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c -+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c -@@ -776,6 +776,7 @@ static int stmmac_init_phy(struct net_device *dev) - char phy_id_fmt[MII_BUS_ID_SIZE + 3]; - char bus_id[MII_BUS_ID_SIZE]; - int interface = priv->plat->interface; -+ int max_speed = priv->plat->max_speed; - priv->oldlink = 0; - priv->speed = 0; - priv->oldduplex = -1; -@@ -800,7 +801,8 @@ static int stmmac_init_phy(struct net_device *dev) - - /* Stop Advertising 1000BASE Capability if interface is not GMII */ - if ((interface == PHY_INTERFACE_MODE_MII) || -- (interface == PHY_INTERFACE_MODE_RMII)) -+ (interface == PHY_INTERFACE_MODE_RMII) || -+ (max_speed < 1000 && max_speed > 0)) - phydev->advertising &= ~(SUPPORTED_1000baseT_Half | - SUPPORTED_1000baseT_Full); - -diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c -index 38bd1f4..9377ee6 100644 ---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c -+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c -@@ -42,6 +42,10 @@ static int stmmac_probe_config_dt(struct platform_device *pdev, - *mac = of_get_mac_address(np); - plat->interface = of_get_phy_mode(np); - -+ /* Get max speed of operation from device tree */ -+ if (of_property_read_u32(np, "max-speed", &plat->max_speed)) -+ plat->max_speed = -1; -+ - plat->bus_id = of_alias_get_id(np, "ethernet"); - if (plat->bus_id < 0) - plat->bus_id = 0; -diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h -index bb5deb0..33ace71 100644 ---- a/include/linux/stmmac.h -+++ b/include/linux/stmmac.h -@@ -110,6 +110,7 @@ struct plat_stmmacenet_data { - int force_sf_dma_mode; - int force_thresh_dma_mode; - int riwt_off; -+ int max_speed; - void (*fix_mac_speed)(void *priv, unsigned int speed); - void (*bus_setup)(void __iomem *ioaddr); - int (*init)(struct platform_device *pdev); --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/151-2-stmmac-fixup-2.patch b/target/linux/sunxi/patches-3.13/151-2-stmmac-fixup-2.patch deleted file mode 100644 index 0f2527fa42..0000000000 --- a/target/linux/sunxi/patches-3.13/151-2-stmmac-fixup-2.patch +++ /dev/null @@ -1,31 +0,0 @@ -From 984203ceff27e9d6d94fbae4b043fc9afb658121 Mon Sep 17 00:00:00 2001 -From: Srinivas Kandagatla -Date: Thu, 16 Jan 2014 10:51:58 +0000 -Subject: [PATCH] net: stmmac: mdio: remove reset gpio free - -This patch removes gpio_free for reset line of the phy, driver stores -the gpio number in its private data-structure to use in future. As the -driver uses this pin in future this pin should not be freed. - -Signed-off-by: Srinivas Kandagatla -Acked-by: Giuseppe Cavallaro -Signed-off-by: David S. Miller ---- - drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 1 - - 1 file changed, 1 deletion(-) - -diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c -index fe7bc99..aab12d2 100644 ---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c -+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c -@@ -166,7 +166,6 @@ static int stmmac_mdio_reset(struct mii_bus *bus) - udelay(data->delays[1]); - gpio_set_value(reset_gpio, active_low ? 1 : 0); - udelay(data->delays[2]); -- gpio_free(reset_gpio); - } - } - #endif --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/151-3-stmmac-fixup-3.patch b/target/linux/sunxi/patches-3.13/151-3-stmmac-fixup-3.patch deleted file mode 100644 index d9c843a132..0000000000 --- a/target/linux/sunxi/patches-3.13/151-3-stmmac-fixup-3.patch +++ /dev/null @@ -1,223 +0,0 @@ -From 09f8d6960b69e474eef9d2aebdd0d536d00af0c8 Mon Sep 17 00:00:00 2001 -From: Srinivas Kandagatla -Date: Thu, 16 Jan 2014 10:52:06 +0000 -Subject: [PATCH] net: stmmac: move dma allocation to new function - -This patch moves dma resource allocation to a new function -alloc_dma_desc_resources, the reason for moving this to a new function -is to keep the memory allocations in a separate function. One more reason -it to get suspend and hibernation cases working without releasing and -allocating these resources during suspend-resume and freeze-restore -cases. - -Signed-off-by: Srinivas Kandagatla -Acked-by: Giuseppe Cavallaro -Signed-off-by: David S. Miller ---- - drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 169 +++++++++++----------- - 1 file changed, 85 insertions(+), 84 deletions(-) - -diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c -index 15192c0..532f2b4 100644 ---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c -+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c -@@ -996,66 +996,6 @@ static int init_dma_desc_rings(struct net_device *dev) - pr_debug("%s: txsize %d, rxsize %d, bfsize %d\n", __func__, - txsize, rxsize, bfsize); - -- if (priv->extend_desc) { -- priv->dma_erx = dma_alloc_coherent(priv->device, rxsize * -- sizeof(struct -- dma_extended_desc), -- &priv->dma_rx_phy, -- GFP_KERNEL); -- if (!priv->dma_erx) -- goto err_dma; -- -- priv->dma_etx = dma_alloc_coherent(priv->device, txsize * -- sizeof(struct -- dma_extended_desc), -- &priv->dma_tx_phy, -- GFP_KERNEL); -- if (!priv->dma_etx) { -- dma_free_coherent(priv->device, priv->dma_rx_size * -- sizeof(struct dma_extended_desc), -- priv->dma_erx, priv->dma_rx_phy); -- goto err_dma; -- } -- } else { -- priv->dma_rx = dma_alloc_coherent(priv->device, rxsize * -- sizeof(struct dma_desc), -- &priv->dma_rx_phy, -- GFP_KERNEL); -- if (!priv->dma_rx) -- goto err_dma; -- -- priv->dma_tx = dma_alloc_coherent(priv->device, txsize * -- sizeof(struct dma_desc), -- &priv->dma_tx_phy, -- GFP_KERNEL); -- if (!priv->dma_tx) { -- dma_free_coherent(priv->device, priv->dma_rx_size * -- sizeof(struct dma_desc), -- priv->dma_rx, priv->dma_rx_phy); -- goto err_dma; -- } -- } -- -- priv->rx_skbuff_dma = kmalloc_array(rxsize, sizeof(dma_addr_t), -- GFP_KERNEL); -- if (!priv->rx_skbuff_dma) -- goto err_rx_skbuff_dma; -- -- priv->rx_skbuff = kmalloc_array(rxsize, sizeof(struct sk_buff *), -- GFP_KERNEL); -- if (!priv->rx_skbuff) -- goto err_rx_skbuff; -- -- priv->tx_skbuff_dma = kmalloc_array(txsize, sizeof(dma_addr_t), -- GFP_KERNEL); -- if (!priv->tx_skbuff_dma) -- goto err_tx_skbuff_dma; -- -- priv->tx_skbuff = kmalloc_array(txsize, sizeof(struct sk_buff *), -- GFP_KERNEL); -- if (!priv->tx_skbuff) -- goto err_tx_skbuff; -- - if (netif_msg_probe(priv)) { - pr_debug("(%s) dma_rx_phy=0x%08x dma_tx_phy=0x%08x\n", __func__, - (u32) priv->dma_rx_phy, (u32) priv->dma_tx_phy); -@@ -1123,30 +1063,6 @@ static int init_dma_desc_rings(struct net_device *dev) - err_init_rx_buffers: - while (--i >= 0) - stmmac_free_rx_buffers(priv, i); -- kfree(priv->tx_skbuff); --err_tx_skbuff: -- kfree(priv->tx_skbuff_dma); --err_tx_skbuff_dma: -- kfree(priv->rx_skbuff); --err_rx_skbuff: -- kfree(priv->rx_skbuff_dma); --err_rx_skbuff_dma: -- if (priv->extend_desc) { -- dma_free_coherent(priv->device, priv->dma_tx_size * -- sizeof(struct dma_extended_desc), -- priv->dma_etx, priv->dma_tx_phy); -- dma_free_coherent(priv->device, priv->dma_rx_size * -- sizeof(struct dma_extended_desc), -- priv->dma_erx, priv->dma_rx_phy); -- } else { -- dma_free_coherent(priv->device, -- priv->dma_tx_size * sizeof(struct dma_desc), -- priv->dma_tx, priv->dma_tx_phy); -- dma_free_coherent(priv->device, -- priv->dma_rx_size * sizeof(struct dma_desc), -- priv->dma_rx, priv->dma_rx_phy); -- } --err_dma: - return ret; - } - -@@ -1182,6 +1098,85 @@ static void dma_free_tx_skbufs(struct stmmac_priv *priv) - } - } - -+static int alloc_dma_desc_resources(struct stmmac_priv *priv) -+{ -+ unsigned int txsize = priv->dma_tx_size; -+ unsigned int rxsize = priv->dma_rx_size; -+ int ret = -ENOMEM; -+ -+ priv->rx_skbuff_dma = kmalloc_array(rxsize, sizeof(dma_addr_t), -+ GFP_KERNEL); -+ if (!priv->rx_skbuff_dma) -+ return -ENOMEM; -+ -+ priv->rx_skbuff = kmalloc_array(rxsize, sizeof(struct sk_buff *), -+ GFP_KERNEL); -+ if (!priv->rx_skbuff) -+ goto err_rx_skbuff; -+ -+ priv->tx_skbuff_dma = kmalloc_array(txsize, sizeof(dma_addr_t), -+ GFP_KERNEL); -+ if (!priv->tx_skbuff_dma) -+ goto err_tx_skbuff_dma; -+ -+ priv->tx_skbuff = kmalloc_array(txsize, sizeof(struct sk_buff *), -+ GFP_KERNEL); -+ if (!priv->tx_skbuff) -+ goto err_tx_skbuff; -+ -+ if (priv->extend_desc) { -+ priv->dma_erx = dma_alloc_coherent(priv->device, rxsize * -+ sizeof(struct -+ dma_extended_desc), -+ &priv->dma_rx_phy, -+ GFP_KERNEL); -+ if (!priv->dma_erx) -+ goto err_dma; -+ -+ priv->dma_etx = dma_alloc_coherent(priv->device, txsize * -+ sizeof(struct -+ dma_extended_desc), -+ &priv->dma_tx_phy, -+ GFP_KERNEL); -+ if (!priv->dma_etx) { -+ dma_free_coherent(priv->device, priv->dma_rx_size * -+ sizeof(struct dma_extended_desc), -+ priv->dma_erx, priv->dma_rx_phy); -+ goto err_dma; -+ } -+ } else { -+ priv->dma_rx = dma_alloc_coherent(priv->device, rxsize * -+ sizeof(struct dma_desc), -+ &priv->dma_rx_phy, -+ GFP_KERNEL); -+ if (!priv->dma_rx) -+ goto err_dma; -+ -+ priv->dma_tx = dma_alloc_coherent(priv->device, txsize * -+ sizeof(struct dma_desc), -+ &priv->dma_tx_phy, -+ GFP_KERNEL); -+ if (!priv->dma_tx) { -+ dma_free_coherent(priv->device, priv->dma_rx_size * -+ sizeof(struct dma_desc), -+ priv->dma_rx, priv->dma_rx_phy); -+ goto err_dma; -+ } -+ } -+ -+ return 0; -+ -+err_dma: -+ kfree(priv->tx_skbuff); -+err_tx_skbuff: -+ kfree(priv->tx_skbuff_dma); -+err_tx_skbuff_dma: -+ kfree(priv->rx_skbuff); -+err_rx_skbuff: -+ kfree(priv->rx_skbuff_dma); -+ return ret; -+} -+ - static void free_dma_desc_resources(struct stmmac_priv *priv) - { - /* Release the DMA TX/RX socket buffers */ -@@ -1623,6 +1618,12 @@ static int stmmac_open(struct net_device *dev) - priv->dma_rx_size = STMMAC_ALIGN(dma_rxsize); - priv->dma_buf_sz = STMMAC_ALIGN(buf_sz); - -+ alloc_dma_desc_resources(priv); -+ if (ret < 0) { -+ pr_err("%s: DMA descriptors allocation failed\n", __func__); -+ goto dma_desc_error; -+ } -+ - ret = init_dma_desc_rings(dev); - if (ret < 0) { - pr_err("%s: DMA descriptors initialization failed\n", __func__); --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/151-4-stmmac-fixup-4.patch b/target/linux/sunxi/patches-3.13/151-4-stmmac-fixup-4.patch deleted file mode 100644 index e006fda7dd..0000000000 --- a/target/linux/sunxi/patches-3.13/151-4-stmmac-fixup-4.patch +++ /dev/null @@ -1,214 +0,0 @@ -From 523f11b5d4fd72efb72b04cd7006bfd1d1d4f341 Mon Sep 17 00:00:00 2001 -From: Srinivas Kandagatla -Date: Thu, 16 Jan 2014 10:52:14 +0000 -Subject: [PATCH] net: stmmac: move hardware setup for stmmac_open to new - function - -This patch moves hardware setup part of the code in stmmac_open to a new -function stmmac_hw_setup, the reason for doing this is to make hw -initialization independent function so that PM functions can re-use it to -re-initialize the IP after returning from low power state. -This will also avoid code duplication across stmmac_resume/restore and -stmmac_open. - -Signed-off-by: Srinivas Kandagatla -Acked-by: Giuseppe Cavallaro -Signed-off-by: David S. Miller ---- - drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 155 ++++++++++++---------- - 1 file changed, 88 insertions(+), 67 deletions(-) - -diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c -index 532f2b4..341c8dc3 100644 ---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c -+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c -@@ -1586,6 +1586,86 @@ static void stmmac_init_tx_coalesce(struct stmmac_priv *priv) - } - - /** -+ * stmmac_hw_setup: setup mac in a usable state. -+ * @dev : pointer to the device structure. -+ * Description: -+ * This function sets up the ip in a usable state. -+ * Return value: -+ * 0 on success and an appropriate (-)ve integer as defined in errno.h -+ * file on failure. -+ */ -+static int stmmac_hw_setup(struct net_device *dev) -+{ -+ struct stmmac_priv *priv = netdev_priv(dev); -+ int ret; -+ -+ ret = init_dma_desc_rings(dev); -+ if (ret < 0) { -+ pr_err("%s: DMA descriptors initialization failed\n", __func__); -+ return ret; -+ } -+ /* DMA initialization and SW reset */ -+ ret = stmmac_init_dma_engine(priv); -+ if (ret < 0) { -+ pr_err("%s: DMA engine initialization failed\n", __func__); -+ return ret; -+ } -+ -+ /* Copy the MAC addr into the HW */ -+ priv->hw->mac->set_umac_addr(priv->ioaddr, dev->dev_addr, 0); -+ -+ /* If required, perform hw setup of the bus. */ -+ if (priv->plat->bus_setup) -+ priv->plat->bus_setup(priv->ioaddr); -+ -+ /* Initialize the MAC Core */ -+ priv->hw->mac->core_init(priv->ioaddr); -+ -+ /* Enable the MAC Rx/Tx */ -+ stmmac_set_mac(priv->ioaddr, true); -+ -+ /* Set the HW DMA mode and the COE */ -+ stmmac_dma_operation_mode(priv); -+ -+ stmmac_mmc_setup(priv); -+ -+ ret = stmmac_init_ptp(priv); -+ if (ret) -+ pr_warn("%s: failed PTP initialisation\n", __func__); -+ -+#ifdef CONFIG_STMMAC_DEBUG_FS -+ ret = stmmac_init_fs(dev); -+ if (ret < 0) -+ pr_warn("%s: failed debugFS registration\n", __func__); -+#endif -+ /* Start the ball rolling... */ -+ pr_debug("%s: DMA RX/TX processes started...\n", dev->name); -+ priv->hw->dma->start_tx(priv->ioaddr); -+ priv->hw->dma->start_rx(priv->ioaddr); -+ -+ /* Dump DMA/MAC registers */ -+ if (netif_msg_hw(priv)) { -+ priv->hw->mac->dump_regs(priv->ioaddr); -+ priv->hw->dma->dump_regs(priv->ioaddr); -+ } -+ priv->tx_lpi_timer = STMMAC_DEFAULT_TWT_LS; -+ -+ priv->eee_enabled = stmmac_eee_init(priv); -+ -+ stmmac_init_tx_coalesce(priv); -+ -+ if ((priv->use_riwt) && (priv->hw->dma->rx_watchdog)) { -+ priv->rx_riwt = MAX_DMA_RIWT; -+ priv->hw->dma->rx_watchdog(priv->ioaddr, MAX_DMA_RIWT); -+ } -+ -+ if (priv->pcs && priv->hw->mac->ctrl_ane) -+ priv->hw->mac->ctrl_ane(priv->ioaddr, 0); -+ -+ return 0; -+} -+ -+/** - * stmmac_open - open entry point of the driver - * @dev : pointer to the device structure. - * Description: -@@ -1613,6 +1693,10 @@ static int stmmac_open(struct net_device *dev) - } - } - -+ /* Extra statistics */ -+ memset(&priv->xstats, 0, sizeof(struct stmmac_extra_stats)); -+ priv->xstats.threshold = tc; -+ - /* Create and initialize the TX/RX descriptors chains. */ - priv->dma_tx_size = STMMAC_ALIGN(dma_txsize); - priv->dma_rx_size = STMMAC_ALIGN(dma_rxsize); -@@ -1624,28 +1708,14 @@ static int stmmac_open(struct net_device *dev) - goto dma_desc_error; - } - -- ret = init_dma_desc_rings(dev); -+ ret = stmmac_hw_setup(dev); - if (ret < 0) { -- pr_err("%s: DMA descriptors initialization failed\n", __func__); -- goto dma_desc_error; -- } -- -- /* DMA initialization and SW reset */ -- ret = stmmac_init_dma_engine(priv); -- if (ret < 0) { -- pr_err("%s: DMA engine initialization failed\n", __func__); -+ pr_err("%s: Hw setup failed\n", __func__); - goto init_error; - } - -- /* Copy the MAC addr into the HW */ -- priv->hw->mac->set_umac_addr(priv->ioaddr, dev->dev_addr, 0); -- -- /* If required, perform hw setup of the bus. */ -- if (priv->plat->bus_setup) -- priv->plat->bus_setup(priv->ioaddr); -- -- /* Initialize the MAC Core */ -- priv->hw->mac->core_init(priv->ioaddr); -+ if (priv->phydev) -+ phy_start(priv->phydev); - - /* Request the IRQ lines */ - ret = request_irq(dev->irq, stmmac_interrupt, -@@ -1678,55 +1748,6 @@ static int stmmac_open(struct net_device *dev) - } - } - -- /* Enable the MAC Rx/Tx */ -- stmmac_set_mac(priv->ioaddr, true); -- -- /* Set the HW DMA mode and the COE */ -- stmmac_dma_operation_mode(priv); -- -- /* Extra statistics */ -- memset(&priv->xstats, 0, sizeof(struct stmmac_extra_stats)); -- priv->xstats.threshold = tc; -- -- stmmac_mmc_setup(priv); -- -- ret = stmmac_init_ptp(priv); -- if (ret) -- pr_warn("%s: failed PTP initialisation\n", __func__); -- --#ifdef CONFIG_STMMAC_DEBUG_FS -- ret = stmmac_init_fs(dev); -- if (ret < 0) -- pr_warn("%s: failed debugFS registration\n", __func__); --#endif -- /* Start the ball rolling... */ -- pr_debug("%s: DMA RX/TX processes started...\n", dev->name); -- priv->hw->dma->start_tx(priv->ioaddr); -- priv->hw->dma->start_rx(priv->ioaddr); -- -- /* Dump DMA/MAC registers */ -- if (netif_msg_hw(priv)) { -- priv->hw->mac->dump_regs(priv->ioaddr); -- priv->hw->dma->dump_regs(priv->ioaddr); -- } -- -- if (priv->phydev) -- phy_start(priv->phydev); -- -- priv->tx_lpi_timer = STMMAC_DEFAULT_TWT_LS; -- -- priv->eee_enabled = stmmac_eee_init(priv); -- -- stmmac_init_tx_coalesce(priv); -- -- if ((priv->use_riwt) && (priv->hw->dma->rx_watchdog)) { -- priv->rx_riwt = MAX_DMA_RIWT; -- priv->hw->dma->rx_watchdog(priv->ioaddr, MAX_DMA_RIWT); -- } -- -- if (priv->pcs && priv->hw->mac->ctrl_ane) -- priv->hw->mac->ctrl_ane(priv->ioaddr, 0); -- - napi_enable(&priv->napi); - netif_start_queue(dev); - --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/151-5-stmmac-fixup-5.patch b/target/linux/sunxi/patches-3.13/151-5-stmmac-fixup-5.patch deleted file mode 100644 index 1a60574297..0000000000 --- a/target/linux/sunxi/patches-3.13/151-5-stmmac-fixup-5.patch +++ /dev/null @@ -1,45 +0,0 @@ -From 073752aa59b3db120b2508d5bdd0598ada25fd25 Mon Sep 17 00:00:00 2001 -From: Srinivas Kandagatla -Date: Thu, 16 Jan 2014 10:52:27 +0000 -Subject: [PATCH] net: stmmac: make stmmac_mdio_reset non-static - -This patch promotes stmmac_mdio_reset function from static to -non-static, so that power management functions can decide to reset if -the IP comes out from lowe power state specially hibernation cases. - -Signed-off-by: Srinivas Kandagatla -Acked-by: Giuseppe Cavallaro -Signed-off-by: David S. Miller ---- - drivers/net/ethernet/stmicro/stmmac/stmmac.h | 1 + - drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 2 +- - 2 files changed, 2 insertions(+), 1 deletion(-) - -diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h -index 92be6b3..5a568015 100644 ---- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h -+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h -@@ -110,6 +110,7 @@ struct stmmac_priv { - - int stmmac_mdio_unregister(struct net_device *ndev); - int stmmac_mdio_register(struct net_device *ndev); -+int stmmac_mdio_reset(struct mii_bus *mii); - void stmmac_set_ethtool_ops(struct net_device *netdev); - extern const struct stmmac_desc_ops enh_desc_ops; - extern const struct stmmac_desc_ops ndesc_ops; -diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c -index aab12d2..a468eb1 100644 ---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c -+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c -@@ -128,7 +128,7 @@ static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg, - * @bus: points to the mii_bus structure - * Description: reset the MII bus - */ --static int stmmac_mdio_reset(struct mii_bus *bus) -+int stmmac_mdio_reset(struct mii_bus *bus) - { - #if defined(CONFIG_STMMAC_PLATFORM) - struct net_device *ndev = bus->priv; --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/151-6-stmmac-fixup-6.patch b/target/linux/sunxi/patches-3.13/151-6-stmmac-fixup-6.patch deleted file mode 100644 index 25564c66a8..0000000000 --- a/target/linux/sunxi/patches-3.13/151-6-stmmac-fixup-6.patch +++ /dev/null @@ -1,57 +0,0 @@ -From 623997fb90eab7a135c2c68a332c8450a488baca Mon Sep 17 00:00:00 2001 -From: Srinivas Kandagatla -Date: Thu, 16 Jan 2014 10:52:35 +0000 -Subject: [PATCH] net: stmmac: fix power management suspend-resume case - -The driver PM resume assumes that the IP is still powered up and the -all the register contents are not disturbed when it comes out of low -power suspend case. This assumption is wrong, basically the driver -should not consider any state of registers after it comes out of low -power. However driver can keep the part of the IP powered up if its a -wake up source. But it can not assume the register state of the IP. Also -its possible that SOC glue layer can take the power off the IP if its -not wake-up source to reduce the power consumption. - -This patch re initializes hardware by calling stmmac_hw_setup function in -resume case. - -Signed-off-by: Srinivas Kandagatla -Acked-by: Giuseppe Cavallaro -Signed-off-by: David S. Miller ---- - drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 13 +++++++------ - 1 file changed, 7 insertions(+), 6 deletions(-) - -diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c -index 341c8dc3..742a83f 100644 ---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c -+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c -@@ -2887,18 +2887,19 @@ int stmmac_resume(struct net_device *ndev) - * this bit because it can generate problems while resuming - * from another devices (e.g. serial console). - */ -- if (device_may_wakeup(priv->device)) -+ if (device_may_wakeup(priv->device)) { - priv->hw->mac->pmt(priv->ioaddr, 0); -- else -+ } else { - /* enable the clk prevously disabled */ - clk_prepare_enable(priv->stmmac_clk); -+ /* reset the phy so that it's ready */ -+ if (priv->mii) -+ stmmac_mdio_reset(priv->mii); -+ } - - netif_device_attach(ndev); - -- /* Enable the MAC and DMA */ -- stmmac_set_mac(priv->ioaddr, true); -- priv->hw->dma->start_tx(priv->ioaddr); -- priv->hw->dma->start_rx(priv->ioaddr); -+ stmmac_hw_setup(ndev); - - napi_enable(&priv->napi); - --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/151-7-stmmac-fixup-7.patch b/target/linux/sunxi/patches-3.13/151-7-stmmac-fixup-7.patch deleted file mode 100644 index 67e0c5bd78..0000000000 --- a/target/linux/sunxi/patches-3.13/151-7-stmmac-fixup-7.patch +++ /dev/null @@ -1,146 +0,0 @@ -From 33a23e223749c45ff8099ff9baa235301a3ad07f Mon Sep 17 00:00:00 2001 -From: Srinivas Kandagatla -Date: Thu, 16 Jan 2014 10:52:44 +0000 -Subject: [PATCH] net: stmmac: use suspend functions for hibernation - -In hibernation freeze case the driver just releases the resources like -dma buffers, irqs, unregisters the drivers and during restore it does -register, request the resources. This is not really necessary, as part -of power management all the data structures are intact, all the -previously allocated resources can be used after coming out of low -power. - -This patch uses the suspend and resume callbacks for freeze and -restore which initializes the hardware correctly without unregistering -or releasing the resources, this should also help in reducing the time -to restore. - -Also this patch fixes a bug in stmmac_pltfr_restore and -stmmac_pltfr_freeze where it tries to get hold of platform data via -dev_get_platdata call, which would return NULL in device tree cases and -the next if statement would crash as there is no NULL check. - -Signed-off-by: Srinivas Kandagatla -Acked-by: Giuseppe Cavallaro -Signed-off-by: David S. Miller ---- - drivers/net/ethernet/stmicro/stmmac/stmmac.h | 2 - - drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 16 -------- - .../net/ethernet/stmicro/stmmac/stmmac_platform.c | 44 ++++++---------------- - 3 files changed, 12 insertions(+), 50 deletions(-) - -diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h -index 5a568015..027f1dd 100644 ---- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h -+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h -@@ -117,8 +117,6 @@ struct stmmac_priv { - extern const struct stmmac_hwtimestamp stmmac_ptp; - int stmmac_ptp_register(struct stmmac_priv *priv); - void stmmac_ptp_unregister(struct stmmac_priv *priv); --int stmmac_freeze(struct net_device *ndev); --int stmmac_restore(struct net_device *ndev); - int stmmac_resume(struct net_device *ndev); - int stmmac_suspend(struct net_device *ndev); - int stmmac_dvr_remove(struct net_device *ndev); -diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c -index 742a83f..c1298a0 100644 ---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c -+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c -@@ -2912,22 +2912,6 @@ int stmmac_resume(struct net_device *ndev) - - return 0; - } -- --int stmmac_freeze(struct net_device *ndev) --{ -- if (!ndev || !netif_running(ndev)) -- return 0; -- -- return stmmac_release(ndev); --} -- --int stmmac_restore(struct net_device *ndev) --{ -- if (!ndev || !netif_running(ndev)) -- return 0; -- -- return stmmac_open(ndev); --} - #endif /* CONFIG_PM */ - - /* Driver can be configured w/ and w/ both PCI and Platf drivers -diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c -index 9377ee6..6d0bf22 100644 ---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c -+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c -@@ -211,55 +211,35 @@ static int stmmac_pltfr_remove(struct platform_device *pdev) - #ifdef CONFIG_PM - static int stmmac_pltfr_suspend(struct device *dev) - { -- struct net_device *ndev = dev_get_drvdata(dev); -- -- return stmmac_suspend(ndev); --} -- --static int stmmac_pltfr_resume(struct device *dev) --{ -- struct net_device *ndev = dev_get_drvdata(dev); -- -- return stmmac_resume(ndev); --} -- --static int stmmac_pltfr_freeze(struct device *dev) --{ - int ret; -- struct plat_stmmacenet_data *plat_dat = dev_get_platdata(dev); - struct net_device *ndev = dev_get_drvdata(dev); -+ struct stmmac_priv *priv = netdev_priv(ndev); - struct platform_device *pdev = to_platform_device(dev); - -- ret = stmmac_freeze(ndev); -- if (plat_dat->exit) -- plat_dat->exit(pdev); -+ ret = stmmac_suspend(ndev); -+ if (priv->plat->exit) -+ priv->plat->exit(pdev); - - return ret; - } - --static int stmmac_pltfr_restore(struct device *dev) -+static int stmmac_pltfr_resume(struct device *dev) - { -- struct plat_stmmacenet_data *plat_dat = dev_get_platdata(dev); - struct net_device *ndev = dev_get_drvdata(dev); -+ struct stmmac_priv *priv = netdev_priv(ndev); - struct platform_device *pdev = to_platform_device(dev); - -- if (plat_dat->init) -- plat_dat->init(pdev); -+ if (priv->plat->init) -+ priv->plat->init(pdev); - -- return stmmac_restore(ndev); -+ return stmmac_resume(ndev); - } - --static const struct dev_pm_ops stmmac_pltfr_pm_ops = { -- .suspend = stmmac_pltfr_suspend, -- .resume = stmmac_pltfr_resume, -- .freeze = stmmac_pltfr_freeze, -- .thaw = stmmac_pltfr_restore, -- .restore = stmmac_pltfr_restore, --}; --#else --static const struct dev_pm_ops stmmac_pltfr_pm_ops; - #endif /* CONFIG_PM */ - -+static SIMPLE_DEV_PM_OPS(stmmac_pltfr_pm_ops, -+ stmmac_pltfr_suspend, stmmac_pltfr_resume); -+ - static const struct of_device_id stmmac_dt_ids[] = { - { .compatible = "st,spear600-gmac"}, - { .compatible = "snps,dwmac-3.610"}, --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/151-8-stmmac-fixup-8.patch b/target/linux/sunxi/patches-3.13/151-8-stmmac-fixup-8.patch deleted file mode 100644 index b4ffecbc12..0000000000 --- a/target/linux/sunxi/patches-3.13/151-8-stmmac-fixup-8.patch +++ /dev/null @@ -1,50 +0,0 @@ -From db88f10ad6a84c5bcb71bf51f0988a4bb1733bea Mon Sep 17 00:00:00 2001 -From: Srinivas Kandagatla -Date: Thu, 16 Jan 2014 10:52:52 +0000 -Subject: [PATCH] net: stmmac: restore pinstate in pm resume. - -This patch adds code to restore default pinstate of the pins when it -comes back from low power state. Without this patch the state of the -pins would be unknown and the driver would not work. - -This patch also adds code to put the pins in to sleep state when the -driver enters low power state. - -Signed-off-by: Srinivas Kandagatla -Acked-by: Giuseppe Cavallaro -Signed-off-by: David S. Miller ---- - drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 3 +++ - 1 file changed, 3 insertions(+) - -diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c -index c1298a0..df7d8d6 100644 ---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c -+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c -@@ -43,6 +43,7 @@ - #include - #include - #include -+#include - #ifdef CONFIG_STMMAC_DEBUG_FS - #include - #include -@@ -2864,6 +2865,7 @@ int stmmac_suspend(struct net_device *ndev) - priv->hw->mac->pmt(priv->ioaddr, priv->wolopts); - else { - stmmac_set_mac(priv->ioaddr, false); -+ pinctrl_pm_select_sleep_state(priv->device); - /* Disable clock in case of PWM is off */ - clk_disable_unprepare(priv->stmmac_clk); - } -@@ -2890,6 +2892,7 @@ int stmmac_resume(struct net_device *ndev) - if (device_may_wakeup(priv->device)) { - priv->hw->mac->pmt(priv->ioaddr, 0); - } else { -+ pinctrl_pm_select_default_state(priv->device); - /* enable the clk prevously disabled */ - clk_prepare_enable(priv->stmmac_clk); - /* reset the phy so that it's ready */ --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/151-9-stmmac-fixup-9.patch b/target/linux/sunxi/patches-3.13/151-9-stmmac-fixup-9.patch deleted file mode 100644 index 5d6e6a5bbf..0000000000 --- a/target/linux/sunxi/patches-3.13/151-9-stmmac-fixup-9.patch +++ /dev/null @@ -1,73 +0,0 @@ -From 89f7f2cfdd7ade55d5230501c21271690790ceda Mon Sep 17 00:00:00 2001 -From: Srinivas Kandagatla -Date: Thu, 16 Jan 2014 10:53:00 +0000 -Subject: [PATCH] net: stmmac: notify the PM core of a wakeup event. - -In PM_SUSPEND_FREEZE and WOL(Wakeup On Lan) case, when the driver gets a -wakeup event, either the driver or platform specific PM code should notify -the pm core about it, so that the system can wakeup from low power. - -In cases where there is no involvement of platform specific PM, it -becomes driver responsibility to notify the PM core to wakeup the -system. - -Without this WOL with PM_SUSPEND_FREEZE does not work on STi based SOCs. - -Signed-off-by: Srinivas Kandagatla -Acked-by: Giuseppe Cavallaro -Signed-off-by: David S. Miller ---- - drivers/net/ethernet/stmicro/stmmac/stmmac.h | 1 + - drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 9 +++++++-- - 2 files changed, 8 insertions(+), 2 deletions(-) - -diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h -index 027f1dd..73709e9 100644 ---- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h -+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h -@@ -105,6 +105,7 @@ struct stmmac_priv { - unsigned int default_addend; - u32 adv_ts; - int use_riwt; -+ int irq_wake; - spinlock_t ptp_lock; - }; - -diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c -index df7d8d6..cddcf76 100644 ---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c -+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c -@@ -2320,6 +2320,9 @@ static irqreturn_t stmmac_interrupt(int irq, void *dev_id) - struct net_device *dev = (struct net_device *)dev_id; - struct stmmac_priv *priv = netdev_priv(dev); - -+ if (priv->irq_wake) -+ pm_wakeup_event(priv->device, 0); -+ - if (unlikely(!dev)) { - pr_err("%s: invalid dev pointer\n", __func__); - return IRQ_NONE; -@@ -2861,9 +2864,10 @@ int stmmac_suspend(struct net_device *ndev) - stmmac_clear_descriptors(priv); - - /* Enable Power down mode by programming the PMT regs */ -- if (device_may_wakeup(priv->device)) -+ if (device_may_wakeup(priv->device)) { - priv->hw->mac->pmt(priv->ioaddr, priv->wolopts); -- else { -+ priv->irq_wake = 1; -+ } else { - stmmac_set_mac(priv->ioaddr, false); - pinctrl_pm_select_sleep_state(priv->device); - /* Disable clock in case of PWM is off */ -@@ -2891,6 +2895,7 @@ int stmmac_resume(struct net_device *ndev) - */ - if (device_may_wakeup(priv->device)) { - priv->hw->mac->pmt(priv->ioaddr, 0); -+ priv->irq_wake = 0; - } else { - pinctrl_pm_select_default_state(priv->device); - /* enable the clk prevously disabled */ --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/152-1-dt-sun7i-enable-gmac-cubietruck.patch b/target/linux/sunxi/patches-3.13/152-1-dt-sun7i-enable-gmac-cubietruck.patch deleted file mode 100644 index 323f86128d..0000000000 --- a/target/linux/sunxi/patches-3.13/152-1-dt-sun7i-enable-gmac-cubietruck.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 957f00fbab201f429ad81cc87ee3177e4289567d Mon Sep 17 00:00:00 2001 -From: Chen-Yu Tsai -Date: Mon, 10 Feb 2014 18:35:51 +0800 -Subject: [PATCH] ARM: dts: sun7i: cubietruck: Enable the GMAC - -The CubieTruck uses the GMAC with an RGMII phy. - -Signed-off-by: Chen-Yu Tsai ---- - arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 12 ++++++++++++ - 1 file changed, 12 insertions(+) - -diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts -index f9dcb61..025ce52 100644 ---- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts -+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts -@@ -51,6 +51,18 @@ - pinctrl-0 = <&i2c2_pins_a>; - status = "okay"; - }; -+ -+ gmac: ethernet@01c50000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&gmac_pins_rgmii_a>; -+ phy = <&phy1>; -+ phy-mode = "rgmii"; -+ status = "okay"; -+ -+ phy1: ethernet-phy@1 { -+ reg = <1>; -+ }; -+ }; - }; - - leds { --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/152-2-dt-sun7i-enable-gmac-cubieboard2.patch b/target/linux/sunxi/patches-3.13/152-2-dt-sun7i-enable-gmac-cubieboard2.patch deleted file mode 100644 index 0f1471ad3d..0000000000 --- a/target/linux/sunxi/patches-3.13/152-2-dt-sun7i-enable-gmac-cubieboard2.patch +++ /dev/null @@ -1,61 +0,0 @@ -From 7405ae68d251191677e51aadb4308d6ce5212bbe Mon Sep 17 00:00:00 2001 -From: Chen-Yu Tsai -Date: Mon, 10 Feb 2014 18:35:52 +0800 -Subject: [PATCH] ARM: dts: sun7i: cubieboard2: Enable GMAC instead of EMAC - -GMAC has better performance and fewer hardware issues. -Use the GMAC in MII mode for ethernet instead of the EMAC. - -Signed-off-by: Chen-Yu Tsai ---- - arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 27 ++++++++++++--------------- - 1 file changed, 12 insertions(+), 15 deletions(-) - -diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts -index 5c51cb8..7bf4935 100644 ---- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts -+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts -@@ -19,21 +19,6 @@ - compatible = "cubietech,cubieboard2", "allwinner,sun7i-a20"; - - soc@01c00000 { -- emac: ethernet@01c0b000 { -- pinctrl-names = "default"; -- pinctrl-0 = <&emac_pins_a>; -- phy = <&phy1>; -- status = "okay"; -- }; -- -- mdio@01c0b080 { -- status = "okay"; -- -- phy1: ethernet-phy@1 { -- reg = <1>; -- }; -- }; -- - pinctrl@01c20800 { - led_pins_cubieboard2: led_pins@0 { - allwinner,pins = "PH20", "PH21"; -@@ -60,6 +45,18 @@ - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - }; -+ -+ gmac: ethernet@01c50000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&gmac_pins_mii_a>; -+ phy = <&phy1>; -+ phy-mode = "mii"; -+ status = "okay"; -+ -+ phy1: ethernet-phy@1 { -+ reg = <1>; -+ }; -+ }; - }; - - leds { --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/152-3-dt-sun7i-enable-gmac-a20-micro.patch b/target/linux/sunxi/patches-3.13/152-3-dt-sun7i-enable-gmac-a20-micro.patch deleted file mode 100644 index d58dccbe25..0000000000 --- a/target/linux/sunxi/patches-3.13/152-3-dt-sun7i-enable-gmac-a20-micro.patch +++ /dev/null @@ -1,62 +0,0 @@ -From e401b86036245d2d62d825f0e3e12286c111b281 Mon Sep 17 00:00:00 2001 -From: Chen-Yu Tsai -Date: Mon, 10 Feb 2014 18:35:53 +0800 -Subject: [PATCH] ARM: dts: sun7i: a20-olinuxino-micro: Enable GMAC instead of - EMAC - -GMAC has better performance and fewer hardware issues. -Use the GMAC in MII mode for ethernet instead of the EMAC. - -Signed-off-by: Chen-Yu Tsai ---- - arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 27 +++++++++++-------------- - 1 file changed, 12 insertions(+), 15 deletions(-) - -diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts -index ead3013..b02a796 100644 ---- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts -+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts -@@ -19,21 +19,6 @@ - compatible = "olimex,a20-olinuxino-micro", "allwinner,sun7i-a20"; - - soc@01c00000 { -- emac: ethernet@01c0b000 { -- pinctrl-names = "default"; -- pinctrl-0 = <&emac_pins_a>; -- phy = <&phy1>; -- status = "okay"; -- }; -- -- mdio@01c0b080 { -- status = "okay"; -- -- phy1: ethernet-phy@1 { -- reg = <1>; -- }; -- }; -- - pinctrl@01c20800 { - led_pins_olinuxino: led_pins@0 { - allwinner,pins = "PH2"; -@@ -78,6 +63,18 @@ - pinctrl-0 = <&i2c2_pins_a>; - status = "okay"; - }; -+ -+ gmac: ethernet@01c50000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&gmac_pins_mii_a>; -+ phy = <&phy1>; -+ phy-mode = "mii"; -+ status = "okay"; -+ -+ phy1: ethernet-phy@1 { -+ reg = <1>; -+ }; -+ }; - }; - - leds { --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/153-1-stmmac-enable-main-clock-when-probing.patch b/target/linux/sunxi/patches-3.13/153-1-stmmac-enable-main-clock-when-probing.patch deleted file mode 100644 index e8137fb924..0000000000 --- a/target/linux/sunxi/patches-3.13/153-1-stmmac-enable-main-clock-when-probing.patch +++ /dev/null @@ -1,96 +0,0 @@ -From 62866e98737e77c87f9dec99edea76ab54360770 Mon Sep 17 00:00:00 2001 -From: Chen-Yu Tsai -Date: Fri, 17 Jan 2014 21:24:40 +0800 -Subject: [PATCH] net: stmmac: Enable stmmac main clock when probing hardware - -The stmmac driver does not enable the main clock during the probe phase. -If the clock was not enabled by the boot loader or was disabled by the -kernel, hardware features and the MDIO bus would not be probed properly. - -Signed-off-by: Chen-Yu Tsai -Signed-off-by: David S. Miller ---- - drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 26 +++++++++++------------ - 1 file changed, 13 insertions(+), 13 deletions(-) - -diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c -index cddcf76..0d2c4cb 100644 ---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c -+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c -@@ -1680,8 +1680,6 @@ static int stmmac_open(struct net_device *dev) - struct stmmac_priv *priv = netdev_priv(dev); - int ret; - -- clk_prepare_enable(priv->stmmac_clk); -- - stmmac_check_ether_addr(priv); - - if (priv->pcs != STMMAC_PCS_RGMII && priv->pcs != STMMAC_PCS_TBI && -@@ -1819,7 +1817,6 @@ static int stmmac_release(struct net_device *dev) - #ifdef CONFIG_STMMAC_DEBUG_FS - stmmac_exit_fs(); - #endif -- clk_disable_unprepare(priv->stmmac_clk); - - stmmac_release_ptp(priv); - -@@ -2727,10 +2724,18 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device, - if ((phyaddr >= 0) && (phyaddr <= 31)) - priv->plat->phy_addr = phyaddr; - -+ priv->stmmac_clk = devm_clk_get(priv->device, STMMAC_RESOURCE_NAME); -+ if (IS_ERR(priv->stmmac_clk)) { -+ dev_warn(priv->device, "%s: warning: cannot get CSR clock\n", -+ __func__); -+ goto error_clk_get; -+ } -+ clk_prepare_enable(priv->stmmac_clk); -+ - /* Init MAC and get the capabilities */ - ret = stmmac_hw_init(priv); - if (ret) -- goto error_free_netdev; -+ goto error_hw_init; - - ndev->netdev_ops = &stmmac_netdev_ops; - -@@ -2768,12 +2773,6 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device, - goto error_netdev_register; - } - -- priv->stmmac_clk = clk_get(priv->device, STMMAC_RESOURCE_NAME); -- if (IS_ERR(priv->stmmac_clk)) { -- pr_warn("%s: warning: cannot get CSR clock\n", __func__); -- goto error_clk_get; -- } -- - /* If a specific clk_csr value is passed from the platform - * this means that the CSR Clock Range selection cannot be - * changed at run-time and it is fixed. Viceversa the driver'll try to -@@ -2801,12 +2800,12 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device, - return priv; - - error_mdio_register: -- clk_put(priv->stmmac_clk); --error_clk_get: - unregister_netdev(ndev); - error_netdev_register: - netif_napi_del(&priv->napi); --error_free_netdev: -+error_hw_init: -+ clk_disable_unprepare(priv->stmmac_clk); -+error_clk_get: - free_netdev(ndev); - - return NULL; -@@ -2833,6 +2832,7 @@ int stmmac_dvr_remove(struct net_device *ndev) - stmmac_mdio_unregister(ndev); - netif_carrier_off(ndev); - unregister_netdev(ndev); -+ clk_disable_unprepare(priv->stmmac_clk); - free_netdev(ndev); - - return 0; --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/153-2-stmmac-add-support-for-optional-reset-control.patch b/target/linux/sunxi/patches-3.13/153-2-stmmac-add-support-for-optional-reset-control.patch deleted file mode 100644 index 188eaf0075..0000000000 --- a/target/linux/sunxi/patches-3.13/153-2-stmmac-add-support-for-optional-reset-control.patch +++ /dev/null @@ -1,158 +0,0 @@ -From c5e4ddbdfa1134a36589c1466ed4abb85fe6f976 Mon Sep 17 00:00:00 2001 -From: Chen-Yu Tsai -Date: Fri, 17 Jan 2014 21:24:41 +0800 -Subject: [PATCH] net: stmmac: Add support for optional reset control - -The DWMAC has a reset assert line, which is used on some SoCs. Add an -optional reset control to stmmac driver core. - -To support reset control deferred probing, this patch changes the driver -probe function to return the actual error, instead of just -EINVAL. - -Signed-off-by: Chen-Yu Tsai -Signed-off-by: David S. Miller ---- - Documentation/devicetree/bindings/net/stmmac.txt | 3 +++ - drivers/net/ethernet/stmicro/stmmac/Kconfig | 1 + - drivers/net/ethernet/stmicro/stmmac/stmmac.h | 2 ++ - drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 19 ++++++++++++++++++- - drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c | 4 ++-- - drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 4 ++-- - 6 files changed, 28 insertions(+), 5 deletions(-) - -diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt -index eba0e5e..d132513 100644 ---- a/Documentation/devicetree/bindings/net/stmmac.txt -+++ b/Documentation/devicetree/bindings/net/stmmac.txt -@@ -30,6 +30,9 @@ Required properties: - - Optional properties: - - mac-address: 6 bytes, mac address -+- resets: Should contain a phandle to the STMMAC reset signal, if any -+- reset-names: Should contain the reset signal name "stmmaceth", if a -+ reset phandle is given - - Examples: - -diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig -index 6e52c0f..b59d1ef 100644 ---- a/drivers/net/ethernet/stmicro/stmmac/Kconfig -+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig -@@ -5,6 +5,7 @@ config STMMAC_ETH - select PHYLIB - select CRC32 - select PTP_1588_CLOCK -+ select RESET_CONTROLLER - ---help--- - This is the driver for the Ethernet IPs are built around a - Synopsys IP Core and only tested on the STMicroelectronics -diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h -index 73709e9..c1c141f 100644 ---- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h -+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h -@@ -32,6 +32,7 @@ - #include - #include "common.h" - #include -+#include - - struct stmmac_priv { - /* Frequently used values are kept adjacent for cache effect */ -@@ -91,6 +92,7 @@ struct stmmac_priv { - int wolopts; - int wol_irq; - struct clk *stmmac_clk; -+ struct reset_control *stmmac_rst; - int clk_csr; - struct timer_list eee_ctrl_timer; - int lpi_irq; -diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c -index 0d2c4cb..0c5c120 100644 ---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c -+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c -@@ -51,6 +51,7 @@ - #include - #include "stmmac_ptp.h" - #include "stmmac.h" -+#include - - #define STMMAC_ALIGN(x) L1_CACHE_ALIGN(x) - #define JUMBO_LEN 9000 -@@ -2728,10 +2729,24 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device, - if (IS_ERR(priv->stmmac_clk)) { - dev_warn(priv->device, "%s: warning: cannot get CSR clock\n", - __func__); -+ ret = PTR_ERR(priv->stmmac_clk); - goto error_clk_get; - } - clk_prepare_enable(priv->stmmac_clk); - -+ priv->stmmac_rst = devm_reset_control_get(priv->device, -+ STMMAC_RESOURCE_NAME); -+ if (IS_ERR(priv->stmmac_rst)) { -+ if (PTR_ERR(priv->stmmac_rst) == -EPROBE_DEFER) { -+ ret = -EPROBE_DEFER; -+ goto error_hw_init; -+ } -+ dev_info(priv->device, "no reset control found\n"); -+ priv->stmmac_rst = NULL; -+ } -+ if (priv->stmmac_rst) -+ reset_control_deassert(priv->stmmac_rst); -+ - /* Init MAC and get the capabilities */ - ret = stmmac_hw_init(priv); - if (ret) -@@ -2808,7 +2823,7 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device, - error_clk_get: - free_netdev(ndev); - -- return NULL; -+ return ERR_PTR(ret); - } - - /** -@@ -2832,6 +2847,8 @@ int stmmac_dvr_remove(struct net_device *ndev) - stmmac_mdio_unregister(ndev); - netif_carrier_off(ndev); - unregister_netdev(ndev); -+ if (priv->stmmac_rst) -+ reset_control_assert(priv->stmmac_rst); - clk_disable_unprepare(priv->stmmac_clk); - free_netdev(ndev); - -diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c -index 37ba2e0..2916089 100644 ---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c -+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c -@@ -100,9 +100,9 @@ static int stmmac_pci_probe(struct pci_dev *pdev, - stmmac_default_data(); - - priv = stmmac_dvr_probe(&(pdev->dev), &plat_dat, addr); -- if (!priv) { -+ if (IS_ERR(priv)) { - pr_err("%s: main driver probe failed", __func__); -- ret = -ENODEV; -+ ret = PTR_ERR(priv); - goto err_out; - } - priv->dev->irq = pdev->irq; -diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c -index 6d0bf22..cc6b89a7 100644 ---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c -+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c -@@ -152,9 +152,9 @@ static int stmmac_pltfr_probe(struct platform_device *pdev) - } - - priv = stmmac_dvr_probe(&(pdev->dev), plat_dat, addr); -- if (!priv) { -+ if (IS_ERR(priv)) { - pr_err("%s: main driver probe failed", __func__); -- return -ENODEV; -+ return PTR_ERR(priv); - } - - /* Get MAC address if available (DT) */ --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/153-3-stmmac-allocate-pass-board-specific-data-to-callbacks.patch b/target/linux/sunxi/patches-3.13/153-3-stmmac-allocate-pass-board-specific-data-to-callbacks.patch deleted file mode 100644 index 2c477c5259..0000000000 --- a/target/linux/sunxi/patches-3.13/153-3-stmmac-allocate-pass-board-specific-data-to-callbacks.patch +++ /dev/null @@ -1,124 +0,0 @@ -From 938dfdaa3c0f92e9a490d324f3bce43bbaef7632 Mon Sep 17 00:00:00 2001 -From: Chen-Yu Tsai -Date: Fri, 17 Jan 2014 21:24:42 +0800 -Subject: [PATCH] net: stmmac: Allocate and pass soc/board specific data to - callbacks - -The current .init and .exit callbacks requires access to driver -private data structures. This is not a good seperation and abstraction. - -Instead, we add a new .setup callback for allocating private data, and -pass the returned pointer to the other callbacks. - -Signed-off-by: Chen-Yu Tsai -Signed-off-by: David S. Miller ---- - Documentation/networking/stmmac.txt | 12 ++++++++---- - drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 18 ++++++++++++++---- - include/linux/stmmac.h | 6 ++++-- - 3 files changed, 26 insertions(+), 10 deletions(-) - -diff --git a/Documentation/networking/stmmac.txt b/Documentation/networking/stmmac.txt -index cdd916d..2090895 100644 ---- a/Documentation/networking/stmmac.txt -+++ b/Documentation/networking/stmmac.txt -@@ -127,8 +127,9 @@ struct plat_stmmacenet_data { - int riwt_off; - void (*fix_mac_speed)(void *priv, unsigned int speed); - void (*bus_setup)(void __iomem *ioaddr); -- int (*init)(struct platform_device *pdev); -- void (*exit)(struct platform_device *pdev); -+ void *(*setup)(struct platform_device *pdev); -+ int (*init)(struct platform_device *pdev, void *priv); -+ void (*exit)(struct platform_device *pdev, void *priv); - void *custom_cfg; - void *custom_data; - void *bsp_priv; -@@ -169,10 +170,13 @@ Where: - o bus_setup: perform HW setup of the bus. For example, on some ST platforms - this field is used to configure the AMBA bridge to generate more - efficient STBus traffic. -- o init/exit: callbacks used for calling a custom initialization; -+ o setup/init/exit: callbacks used for calling a custom initialization; - this is sometime necessary on some platforms (e.g. ST boxes) - where the HW needs to have set some PIO lines or system cfg -- registers. -+ registers. setup should return a pointer to private data, -+ which will be stored in bsp_priv, and then passed to init and -+ exit callbacks. init/exit callbacks should not use or modify -+ platform data. - o custom_cfg/custom_data: this is a custom configuration that can be passed - while initializing the resources. - o bsp_priv: another private pointer. -diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c -index cc6b89a7..704a5e0 100644 ---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c -+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c -@@ -144,9 +144,16 @@ static int stmmac_pltfr_probe(struct platform_device *pdev) - } - } - -+ /* Custom setup (if needed) */ -+ if (plat_dat->setup) { -+ plat_dat->bsp_priv = plat_dat->setup(pdev); -+ if (IS_ERR(plat_dat->bsp_priv)) -+ return PTR_ERR(plat_dat->bsp_priv); -+ } -+ - /* Custom initialisation (if needed)*/ - if (plat_dat->init) { -- ret = plat_dat->init(pdev); -+ ret = plat_dat->init(pdev, plat_dat->bsp_priv); - if (unlikely(ret)) - return ret; - } -@@ -203,7 +210,10 @@ static int stmmac_pltfr_remove(struct platform_device *pdev) - int ret = stmmac_dvr_remove(ndev); - - if (priv->plat->exit) -- priv->plat->exit(pdev); -+ priv->plat->exit(pdev, priv->plat->bsp_priv); -+ -+ if (priv->plat->free) -+ priv->plat->free(pdev, priv->plat->bsp_priv); - - return ret; - } -@@ -218,7 +228,7 @@ static int stmmac_pltfr_suspend(struct device *dev) - - ret = stmmac_suspend(ndev); - if (priv->plat->exit) -- priv->plat->exit(pdev); -+ priv->plat->exit(pdev, priv->plat->bsp_priv); - - return ret; - } -@@ -230,7 +240,7 @@ static int stmmac_pltfr_resume(struct device *dev) - struct platform_device *pdev = to_platform_device(dev); - - if (priv->plat->init) -- priv->plat->init(pdev); -+ priv->plat->init(pdev, priv->plat->bsp_priv); - - return stmmac_resume(ndev); - } -diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h -index 33ace71..0a5a7ac 100644 ---- a/include/linux/stmmac.h -+++ b/include/linux/stmmac.h -@@ -113,8 +113,10 @@ struct plat_stmmacenet_data { - int max_speed; - void (*fix_mac_speed)(void *priv, unsigned int speed); - void (*bus_setup)(void __iomem *ioaddr); -- int (*init)(struct platform_device *pdev); -- void (*exit)(struct platform_device *pdev); -+ void *(*setup)(struct platform_device *pdev); -+ void (*free)(struct platform_device *pdev, void *priv); -+ int (*init)(struct platform_device *pdev, void *priv); -+ void (*exit)(struct platform_device *pdev, void *priv); - void *custom_cfg; - void *custom_data; - void *bsp_priv; --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/153-4-stmmac-honor-dt-parameter-to-dma-store-and-fwd.patch b/target/linux/sunxi/patches-3.13/153-4-stmmac-honor-dt-parameter-to-dma-store-and-fwd.patch deleted file mode 100644 index 17caee3cf7..0000000000 --- a/target/linux/sunxi/patches-3.13/153-4-stmmac-honor-dt-parameter-to-dma-store-and-fwd.patch +++ /dev/null @@ -1,31 +0,0 @@ -From 6aedb8c06df732625cf998c1428396914f3139b4 Mon Sep 17 00:00:00 2001 -From: Chen-Yu Tsai -Date: Fri, 17 Jan 2014 21:24:44 +0800 -Subject: [PATCH] net: stmmac: Honor DT parameter to force DMA store and - forward mode - -"snps,force_sf_dma_mode" is documented in stmmac device tree bindings, -but is never handled by the driver. - -Signed-off-by: Chen-Yu Tsai -Signed-off-by: David S. Miller ---- - drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 2 ++ - 1 file changed, 2 insertions(+) - -diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c -index 704a5e0..634260e 100644 ---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c -+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c -@@ -56,6 +56,8 @@ static int stmmac_probe_config_dt(struct platform_device *pdev, - sizeof(struct stmmac_mdio_bus_data), - GFP_KERNEL); - -+ plat->force_sf_dma_mode = of_property_read_bool(np, "snps,force_sf_dma_mode"); -+ - /* - * Currently only the properties needed on SPEAr600 - * are provided. All other properties should be added --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/153-5-stmmac-deprecate-snps-phy-addr.patch b/target/linux/sunxi/patches-3.13/153-5-stmmac-deprecate-snps-phy-addr.patch deleted file mode 100644 index 5b9b09c672..0000000000 --- a/target/linux/sunxi/patches-3.13/153-5-stmmac-deprecate-snps-phy-addr.patch +++ /dev/null @@ -1,55 +0,0 @@ -From 436f7ecdcc08f71ddc106b7bbe3bcbf1785f3bff Mon Sep 17 00:00:00 2001 -From: Chen-Yu Tsai -Date: Fri, 17 Jan 2014 21:24:45 +0800 -Subject: [PATCH] net: stmmac: Deprecate snps, phy-addr and auto-detect PHY - address - -The snps,phy-addr device tree property is non-standard, and should be -removed in favor of proper phy node support. Remove it from the binding -documents and warn if the property is still used. - -Most PHYs respond to address 0, but a few don't, so auto-detect PHY -address by default, to make up for the lack of explicit address selection. - -Signed-off-by: Chen-Yu Tsai -Signed-off-by: David S. Miller ---- - Documentation/devicetree/bindings/net/stmmac.txt | 1 - - drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 9 ++++++++- - 2 files changed, 8 insertions(+), 2 deletions(-) - -diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt -index d132513..aefb639 100644 ---- a/Documentation/devicetree/bindings/net/stmmac.txt -+++ b/Documentation/devicetree/bindings/net/stmmac.txt -@@ -12,7 +12,6 @@ Required properties: - property - - phy-mode: String, operation mode of the PHY interface. - Supported values are: "mii", "rmii", "gmii", "rgmii". --- snps,phy-addr phy address to connect to. - - snps,reset-gpio gpio number for phy reset. - - snps,reset-active-low boolean flag to indicate if phy reset is active low. - - snps,reset-delays-us is triplet of delays -diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c -index 634260e..82110f1 100644 ---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c -+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c -@@ -50,7 +50,14 @@ static int stmmac_probe_config_dt(struct platform_device *pdev, - if (plat->bus_id < 0) - plat->bus_id = 0; - -- of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr); -+ /* Default to phy auto-detection */ -+ plat->phy_addr = -1; -+ -+ /* "snps,phy-addr" is not a standard property. Mark it as deprecated -+ * and warn of its use. Remove this when phy node support is added. -+ */ -+ if (of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr) == 0) -+ dev_warn(&pdev->dev, "snps,phy-addr property is deprecated\n"); - - plat->mdio_bus_data = devm_kzalloc(&pdev->dev, - sizeof(struct stmmac_mdio_bus_data), --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/153-6-stmmac-use-drvdata-callback-with-compat-strings.patch b/target/linux/sunxi/patches-3.13/153-6-stmmac-use-drvdata-callback-with-compat-strings.patch deleted file mode 100644 index 99ccd34372..0000000000 --- a/target/linux/sunxi/patches-3.13/153-6-stmmac-use-drvdata-callback-with-compat-strings.patch +++ /dev/null @@ -1,123 +0,0 @@ -From 022066f50f53000679d31eb407693085f37b3f14 Mon Sep 17 00:00:00 2001 -From: Chen-Yu Tsai -Date: Fri, 17 Jan 2014 21:24:46 +0800 -Subject: [PATCH] net: stmmac: Use driver data and callbacks tied with - compatible strings - -The stmmac driver core allows passing feature flags and callbacks via -platform data. Add a similar stmmac_of_data to pass flags and callbacks -tied to compatible strings. This allows us to extend stmmac with glue -layers for different SoCs. - -Signed-off-by: Chen-Yu Tsai -Signed-off-by: David S. Miller ---- - .../net/ethernet/stmicro/stmmac/stmmac_platform.c | 44 +++++++++++++++++----- - include/linux/stmmac.h | 18 +++++++++ - 2 files changed, 52 insertions(+), 10 deletions(-) - -diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c -index 82110f1..bf119db 100644 ---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c -+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c -@@ -26,8 +26,20 @@ - #include - #include - #include -+#include - #include "stmmac.h" - -+static const struct of_device_id stmmac_dt_ids[] = { -+ /* SoC specific glue layers should come before generic bindings */ -+ { .compatible = "st,spear600-gmac"}, -+ { .compatible = "snps,dwmac-3.610"}, -+ { .compatible = "snps,dwmac-3.70a"}, -+ { .compatible = "snps,dwmac-3.710"}, -+ { .compatible = "snps,dwmac"}, -+ { /* sentinel */ } -+}; -+MODULE_DEVICE_TABLE(of, stmmac_dt_ids); -+ - #ifdef CONFIG_OF - static int stmmac_probe_config_dt(struct platform_device *pdev, - struct plat_stmmacenet_data *plat, -@@ -35,10 +47,32 @@ static int stmmac_probe_config_dt(struct platform_device *pdev, - { - struct device_node *np = pdev->dev.of_node; - struct stmmac_dma_cfg *dma_cfg; -+ const struct of_device_id *device; - - if (!np) - return -ENODEV; - -+ device = of_match_device(stmmac_dt_ids, &pdev->dev); -+ if (!device) -+ return -ENODEV; -+ -+ if (device->data) { -+ const struct stmmac_of_data *data = device->data; -+ plat->has_gmac = data->has_gmac; -+ plat->enh_desc = data->enh_desc; -+ plat->tx_coe = data->tx_coe; -+ plat->rx_coe = data->rx_coe; -+ plat->bugged_jumbo = data->bugged_jumbo; -+ plat->pmt = data->pmt; -+ plat->riwt_off = data->riwt_off; -+ plat->fix_mac_speed = data->fix_mac_speed; -+ plat->bus_setup = data->bus_setup; -+ plat->setup = data->setup; -+ plat->free = data->free; -+ plat->init = data->init; -+ plat->exit = data->exit; -+ } -+ - *mac = of_get_mac_address(np); - plat->interface = of_get_phy_mode(np); - -@@ -259,16 +293,6 @@ static int stmmac_pltfr_resume(struct device *dev) - static SIMPLE_DEV_PM_OPS(stmmac_pltfr_pm_ops, - stmmac_pltfr_suspend, stmmac_pltfr_resume); - --static const struct of_device_id stmmac_dt_ids[] = { -- { .compatible = "st,spear600-gmac"}, -- { .compatible = "snps,dwmac-3.610"}, -- { .compatible = "snps,dwmac-3.70a"}, -- { .compatible = "snps,dwmac-3.710"}, -- { .compatible = "snps,dwmac"}, -- { /* sentinel */ } --}; --MODULE_DEVICE_TABLE(of, stmmac_dt_ids); -- - struct platform_driver stmmac_pltfr_driver = { - .probe = stmmac_pltfr_probe, - .remove = stmmac_pltfr_remove, -diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h -index 0a5a7ac..1367974 100644 ---- a/include/linux/stmmac.h -+++ b/include/linux/stmmac.h -@@ -121,4 +121,22 @@ struct plat_stmmacenet_data { - void *custom_data; - void *bsp_priv; - }; -+ -+/* of_data for SoC glue layer device tree bindings */ -+ -+struct stmmac_of_data { -+ int has_gmac; -+ int enh_desc; -+ int tx_coe; -+ int rx_coe; -+ int bugged_jumbo; -+ int pmt; -+ int riwt_off; -+ void (*fix_mac_speed)(void *priv, unsigned int speed); -+ void (*bus_setup)(void __iomem *ioaddr); -+ void *(*setup)(struct platform_device *pdev); -+ void (*free)(struct platform_device *pdev, void *priv); -+ int (*init)(struct platform_device *pdev, void *priv); -+ void (*exit)(struct platform_device *pdev, void *priv); -+}; - #endif --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/153-7-stmmac-sunxi-extensions-for-a20.patch b/target/linux/sunxi/patches-3.13/153-7-stmmac-sunxi-extensions-for-a20.patch deleted file mode 100644 index d0d9f13646..0000000000 --- a/target/linux/sunxi/patches-3.13/153-7-stmmac-sunxi-extensions-for-a20.patch +++ /dev/null @@ -1,273 +0,0 @@ -From af0bd4e9ba809391f275d0c094ac0bfbfbb3f430 Mon Sep 17 00:00:00 2001 -From: Chen-Yu Tsai -Date: Fri, 17 Jan 2014 21:24:47 +0800 -Subject: [PATCH] net: stmmac: sunxi platform extensions for GMAC in Allwinner - A20 SoC's - -The Allwinner A20 has an ethernet controller that seems to be -an early version of Synopsys DesignWare MAC 10/100/1000 Universal, -which is supported by the stmmac driver. - -Allwinner's GMAC requires setting additional registers in the SoC's -clock control unit. - -The exact version of the DWMAC IP that Allwinner uses is unknown, -thus the exact feature set is unknown. - -Signed-off-by: Chen-Yu Tsai -Signed-off-by: David S. Miller ---- - .../bindings/net/allwinner,sun7i-a20-gmac.txt | 27 ++++ - drivers/net/ethernet/stmicro/stmmac/Kconfig | 11 ++ - drivers/net/ethernet/stmicro/stmmac/Makefile | 1 + - drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c | 140 +++++++++++++++++++++ - drivers/net/ethernet/stmicro/stmmac/stmmac.h | 3 + - .../net/ethernet/stmicro/stmmac/stmmac_platform.c | 3 + - 6 files changed, 185 insertions(+) - create mode 100644 Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt - create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c - -diff --git a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt -new file mode 100644 -index 0000000..ea4d752 ---- /dev/null -+++ b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt -@@ -0,0 +1,27 @@ -+* Allwinner GMAC ethernet controller -+ -+This device is a platform glue layer for stmmac. -+Please see stmmac.txt for the other unchanged properties. -+ -+Required properties: -+ - compatible: Should be "allwinner,sun7i-a20-gmac" -+ - clocks: Should contain the GMAC main clock, and tx clock -+ The tx clock type should be "allwinner,sun7i-a20-gmac-clk" -+ - clock-names: Should contain the clock names "stmmaceth", -+ and "allwinner_gmac_tx" -+ -+Optional properties: -+- phy-supply: phandle to a regulator if the PHY needs one -+ -+Examples: -+ -+ gmac: ethernet@01c50000 { -+ compatible = "allwinner,sun7i-a20-gmac"; -+ reg = <0x01c50000 0x10000>, -+ <0x01c20164 0x4>; -+ interrupts = <0 85 1>; -+ interrupt-names = "macirq"; -+ clocks = <&ahb_gates 49>, <&gmac_tx>; -+ clock-names = "stmmaceth", "allwinner_gmac_tx"; -+ phy-mode = "mii"; -+ }; -diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig -index b59d1ef..e2f202e 100644 ---- a/drivers/net/ethernet/stmicro/stmmac/Kconfig -+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig -@@ -26,6 +26,17 @@ config STMMAC_PLATFORM - - If unsure, say N. - -+config DWMAC_SUNXI -+ bool "Allwinner GMAC support" -+ depends on STMMAC_PLATFORM && ARCH_SUNXI -+ default y -+ ---help--- -+ Support for Allwinner A20/A31 GMAC ethernet controllers. -+ -+ This selects Allwinner SoC glue layer support for the -+ stmmac device driver. This driver is used for A20/A31 -+ GMAC ethernet controller. -+ - config STMMAC_PCI - bool "STMMAC PCI bus support" - depends on STMMAC_ETH && PCI -diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile -index 356a9dd..ecadece 100644 ---- a/drivers/net/ethernet/stmicro/stmmac/Makefile -+++ b/drivers/net/ethernet/stmicro/stmmac/Makefile -@@ -1,6 +1,7 @@ - obj-$(CONFIG_STMMAC_ETH) += stmmac.o - stmmac-$(CONFIG_STMMAC_PLATFORM) += stmmac_platform.o - stmmac-$(CONFIG_STMMAC_PCI) += stmmac_pci.o -+stmmac-$(CONFIG_DWMAC_SUNXI) += dwmac-sunxi.o - stmmac-objs:= stmmac_main.o stmmac_ethtool.o stmmac_mdio.o ring_mode.o \ - chain_mode.o dwmac_lib.o dwmac1000_core.o dwmac1000_dma.o \ - dwmac100_core.o dwmac100_dma.o enh_desc.o norm_desc.o \ -diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c -new file mode 100644 -index 0000000..771cd15f ---- /dev/null -+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c -@@ -0,0 +1,140 @@ -+/** -+ * dwmac-sunxi.c - Allwinner sunxi DWMAC specific glue layer -+ * -+ * Copyright (C) 2013 Chen-Yu Tsai -+ * -+ * Chen-Yu Tsai -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+struct sunxi_priv_data { -+ int interface; -+ int clk_enabled; -+ struct clk *tx_clk; -+ struct regulator *regulator; -+}; -+ -+static void *sun7i_gmac_setup(struct platform_device *pdev) -+{ -+ struct sunxi_priv_data *gmac; -+ struct device *dev = &pdev->dev; -+ -+ gmac = devm_kzalloc(dev, sizeof(*gmac), GFP_KERNEL); -+ if (!gmac) -+ return ERR_PTR(-ENOMEM); -+ -+ gmac->interface = of_get_phy_mode(dev->of_node); -+ -+ gmac->tx_clk = devm_clk_get(dev, "allwinner_gmac_tx"); -+ if (IS_ERR(gmac->tx_clk)) { -+ dev_err(dev, "could not get tx clock\n"); -+ return gmac->tx_clk; -+ } -+ -+ /* Optional regulator for PHY */ -+ gmac->regulator = devm_regulator_get_optional(dev, "phy"); -+ if (IS_ERR(gmac->regulator)) { -+ if (PTR_ERR(gmac->regulator) == -EPROBE_DEFER) -+ return ERR_PTR(-EPROBE_DEFER); -+ dev_info(dev, "no regulator found\n"); -+ gmac->regulator = NULL; -+ } -+ -+ return gmac; -+} -+ -+#define SUN7I_GMAC_GMII_RGMII_RATE 125000000 -+#define SUN7I_GMAC_MII_RATE 25000000 -+ -+static int sun7i_gmac_init(struct platform_device *pdev, void *priv) -+{ -+ struct sunxi_priv_data *gmac = priv; -+ int ret; -+ -+ if (gmac->regulator) { -+ ret = regulator_enable(gmac->regulator); -+ if (ret) -+ return ret; -+ } -+ -+ /* Set GMAC interface port mode -+ * -+ * The GMAC TX clock lines are configured by setting the clock -+ * rate, which then uses the auto-reparenting feature of the -+ * clock driver, and enabling/disabling the clock. -+ */ -+ if (gmac->interface == PHY_INTERFACE_MODE_RGMII) { -+ clk_set_rate(gmac->tx_clk, SUN7I_GMAC_GMII_RGMII_RATE); -+ clk_prepare_enable(gmac->tx_clk); -+ gmac->clk_enabled = 1; -+ } else { -+ clk_set_rate(gmac->tx_clk, SUN7I_GMAC_MII_RATE); -+ clk_prepare(gmac->tx_clk); -+ } -+ -+ return 0; -+} -+ -+static void sun7i_gmac_exit(struct platform_device *pdev, void *priv) -+{ -+ struct sunxi_priv_data *gmac = priv; -+ -+ if (gmac->clk_enabled) { -+ clk_disable(gmac->tx_clk); -+ gmac->clk_enabled = 0; -+ } -+ clk_unprepare(gmac->tx_clk); -+ -+ if (gmac->regulator) -+ regulator_disable(gmac->regulator); -+} -+ -+static void sun7i_fix_speed(void *priv, unsigned int speed) -+{ -+ struct sunxi_priv_data *gmac = priv; -+ -+ /* only GMII mode requires us to reconfigure the clock lines */ -+ if (gmac->interface != PHY_INTERFACE_MODE_GMII) -+ return; -+ -+ if (gmac->clk_enabled) { -+ clk_disable(gmac->tx_clk); -+ gmac->clk_enabled = 0; -+ } -+ clk_unprepare(gmac->tx_clk); -+ -+ if (speed == 1000) { -+ clk_set_rate(gmac->tx_clk, SUN7I_GMAC_GMII_RGMII_RATE); -+ clk_prepare_enable(gmac->tx_clk); -+ gmac->clk_enabled = 1; -+ } else { -+ clk_set_rate(gmac->tx_clk, SUN7I_GMAC_MII_RATE); -+ clk_prepare(gmac->tx_clk); -+ } -+} -+ -+/* of_data specifying hardware features and callbacks. -+ * hardware features were copied from Allwinner drivers. */ -+const struct stmmac_of_data sun7i_gmac_data = { -+ .has_gmac = 1, -+ .tx_coe = 1, -+ .fix_mac_speed = sun7i_fix_speed, -+ .setup = sun7i_gmac_setup, -+ .init = sun7i_gmac_init, -+ .exit = sun7i_gmac_exit, -+}; -diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h -index c1c141f..d9af26e 100644 ---- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h -+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h -@@ -130,6 +130,9 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device, - bool stmmac_eee_init(struct stmmac_priv *priv); - - #ifdef CONFIG_STMMAC_PLATFORM -+#ifdef CONFIG_DWMAC_SUNXI -+extern const struct stmmac_of_data sun7i_gmac_data; -+#endif - extern struct platform_driver stmmac_pltfr_driver; - static inline int stmmac_register_platform(void) - { -diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c -index bf119db..9d4baa8 100644 ---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c -+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c -@@ -30,6 +30,9 @@ - #include "stmmac.h" - - static const struct of_device_id stmmac_dt_ids[] = { -+#ifdef CONFIG_DWMAC_SUNXI -+ { .compatible = "allwinner,sun7i-a20-gmac", .data = &sun7i_gmac_data}, -+#endif - /* SoC specific glue layers should come before generic bindings */ - { .compatible = "st,spear600-gmac"}, - { .compatible = "snps,dwmac-3.610"}, --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/160-1-phy-core-phy_get_leave-error-logging-to-caller.patch b/target/linux/sunxi/patches-3.13/160-1-phy-core-phy_get_leave-error-logging-to-caller.patch deleted file mode 100644 index bc6f0e9e92..0000000000 --- a/target/linux/sunxi/patches-3.13/160-1-phy-core-phy_get_leave-error-logging-to-caller.patch +++ /dev/null @@ -1,45 +0,0 @@ -From cc8e5932c671ba2d3ce511a15c19c47b015bc4ab Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Sun, 5 Jan 2014 00:00:30 +0100 -Subject: [PATCH] phy-core: phy_get: Leave error logging to the caller - -In various cases errors may be expected, ie probe-deferral or a call to -phy_get from a driver where the use of a phy is optional. - -Rather then adding all sort of complicated checks for this, and/or adding -special functions like devm_phy_get_optional, simply don't log an error, -and let deciding if get_phy returning an error really should result in a -dev_err up to the caller. - -Signed-off-by: Hans de Goede ---- - drivers/phy/phy-core.c | 10 ++-------- - 1 file changed, 2 insertions(+), 8 deletions(-) - -diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c -index 5f5b0f4..b355553 100644 ---- a/drivers/phy/phy-core.c -+++ b/drivers/phy/phy-core.c -@@ -404,17 +404,11 @@ struct phy *phy_get(struct device *dev, const char *string) - index = of_property_match_string(dev->of_node, "phy-names", - string); - phy = of_phy_get(dev, index); -- if (IS_ERR(phy)) { -- dev_err(dev, "unable to find phy\n"); -- return phy; -- } - } else { - phy = phy_lookup(dev, string); -- if (IS_ERR(phy)) { -- dev_err(dev, "unable to find phy\n"); -- return phy; -- } - } -+ if (IS_ERR(phy)) -+ return phy; - - if (!try_module_get(phy->ops->owner)) - return ERR_PTR(-EPROBE_DEFER); --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/160-2-phy-core-dont-porpagate-ENOSUPP.patch b/target/linux/sunxi/patches-3.13/160-2-phy-core-dont-porpagate-ENOSUPP.patch deleted file mode 100644 index 5caeb8bd27..0000000000 --- a/target/linux/sunxi/patches-3.13/160-2-phy-core-dont-porpagate-ENOSUPP.patch +++ /dev/null @@ -1,40 +0,0 @@ -From 37e3cce7288f7d5c34ae630f16faf48bd3d01c18 Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Sun, 5 Jan 2014 22:40:39 +0100 -Subject: [PATCH] phy-core: Don't propagate -ENOSUPP from - phy_pm_runtime_get_sync to caller - -The phy-core allows phy_init and phy_power_on to be called multiple times, -but before this patch -ENOSUPP from phy_pm_runtime_get_sync would be -propagated to the caller for the 2nd and later calls. - -Signed-off-by: Hans de Goede ---- - drivers/phy/phy-core.c | 4 ++++ - 1 file changed, 4 insertions(+) - -diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c -index b355553..6c73837 100644 ---- a/drivers/phy/phy-core.c -+++ b/drivers/phy/phy-core.c -@@ -176,6 +176,8 @@ int phy_init(struct phy *phy) - dev_err(&phy->dev, "phy init failed --> %d\n", ret); - goto out; - } -+ } else { -+ ret = 0; /* Override possible ret == -ENOTSUPP */ - } - ++phy->init_count; - -@@ -232,6 +234,8 @@ int phy_power_on(struct phy *phy) - dev_err(&phy->dev, "phy poweron failed --> %d\n", ret); - goto out; - } -+ } else { -+ ret = 0; /* Override possible ret == -ENOTSUPP */ - } - ++phy->power_count; - mutex_unlock(&phy->mutex); --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/160-3-phy-core-no-module-build.patch b/target/linux/sunxi/patches-3.13/160-3-phy-core-no-module-build.patch deleted file mode 100644 index 15be07e676..0000000000 --- a/target/linux/sunxi/patches-3.13/160-3-phy-core-no-module-build.patch +++ /dev/null @@ -1,48 +0,0 @@ -From 87c01c9ef0602abaa909771c6c6eab1f4c2c384d Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Tue, 11 Feb 2014 16:55:57 +0100 -Subject: [PATCH] phy-core: Don't allow building phy-core as a module - -include/phy/phy.h has stub code in there for when building without the -phy-core enabled. This is useful for generic drivers such as ahci-platform, -ehci-platoform and ohci-platform which have support for driving an optional -phy passed to them through the devicetree. - -Since on some boards this phy functionality is not needed, being able to -disable the phy subsystem without needing a lot of #ifdef magic in the -driver using it is quite useful. - -However this breaks when the module using the phy subsystem is build-in and -the phy-core is not, which leads to the build failing with missing symbol -errors in the linking stage of the zImage. - -Which leads to gems such as this being added to the Kconfig for achi_platform: - - depends on GENERIC_PHY || !GENERIC_PHY - -Rather then duplicating this code in a lot of places using the phy-core, -I believe it is better to simply not allow the phy-core to be built as a -module. The phy core is quite small and has no external dependencies, so -always building it in when enabling it should not be an issue. - -Signed-off-by: Hans de Goede ---- - drivers/phy/Kconfig | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig -index afa2354..4ef8755 100644 ---- a/drivers/phy/Kconfig -+++ b/drivers/phy/Kconfig -@@ -5,7 +5,7 @@ - menu "PHY Subsystem" - - config GENERIC_PHY -- tristate "PHY Core" -+ bool "PHY Core" - help - Generic PHY support. - --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/160-4-libahci-allow-override-start_engine.patch b/target/linux/sunxi/patches-3.13/160-4-libahci-allow-override-start_engine.patch deleted file mode 100644 index 518c8d7c5c..0000000000 --- a/target/linux/sunxi/patches-3.13/160-4-libahci-allow-override-start_engine.patch +++ /dev/null @@ -1,222 +0,0 @@ -From 9b10bc9f84fc221fcef9ddca92972af9b442f49d Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Mon, 2 Dec 2013 16:13:32 +0100 -Subject: [PATCH] libahci: Allow drivers to override start_engine - -Allwinner A10 and A20 ARM SoCs have an AHCI sata controller which needs a -special register to be poked before starting the DMA engine. - -This register gets reset on an ahci_stop_engine call, so there is no other -place then ahci_start_engine where this poking can be done. - -This commit allows drivers to override ahci_start_engine behavior for use by -the Allwinner AHCI driver (and potentially other drivers in the future). - -Signed-off-by: Hans de Goede ---- - drivers/ata/ahci.c | 6 ++++-- - drivers/ata/ahci.h | 6 ++++++ - drivers/ata/libahci.c | 26 +++++++++++++++++++------- - drivers/ata/sata_highbank.c | 3 ++- - 4 files changed, 31 insertions(+), 10 deletions(-) - -diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c -index dc2756f..eda68b4 100644 ---- a/drivers/ata/ahci.c -+++ b/drivers/ata/ahci.c -@@ -564,6 +564,7 @@ static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class, - unsigned long deadline) - { - struct ata_port *ap = link->ap; -+ struct ahci_host_priv *hpriv = ap->host->private_data; - bool online; - int rc; - -@@ -574,7 +575,7 @@ static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class, - rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context), - deadline, &online, NULL); - -- ahci_start_engine(ap); -+ hpriv->start_engine(ap); - - DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class); - -@@ -589,6 +590,7 @@ static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class, - { - struct ata_port *ap = link->ap; - struct ahci_port_priv *pp = ap->private_data; -+ struct ahci_host_priv *hpriv = ap->host->private_data; - u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; - struct ata_taskfile tf; - bool online; -@@ -604,7 +606,7 @@ static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class, - rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context), - deadline, &online, NULL); - -- ahci_start_engine(ap); -+ hpriv->start_engine(ap); - - /* The pseudo configuration device on SIMG4726 attached to - * ASUS P5W-DH Deluxe doesn't send signature FIS after -diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h -index 2289efd..64d1a99d 100644 ---- a/drivers/ata/ahci.h -+++ b/drivers/ata/ahci.h -@@ -323,6 +323,12 @@ struct ahci_host_priv { - u32 em_msg_type; /* EM message type */ - struct clk *clk; /* Only for platforms supporting clk */ - void *plat_data; /* Other platform data */ -+ /* -+ * Optional ahci_start_engine override, if not set this gets set to the -+ * default ahci_start_engine during ahci_save_initial_config, this can -+ * be overridden anytime before the host is activated. -+ */ -+ void (*start_engine)(struct ata_port *ap); - }; - - extern int ahci_ignore_sss; -diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c -index 36605ab..f839bb3 100644 ---- a/drivers/ata/libahci.c -+++ b/drivers/ata/libahci.c -@@ -394,6 +394,9 @@ static ssize_t ahci_show_em_supported(struct device *dev, - * - * If inconsistent, config values are fixed up by this function. - * -+ * If it is not set already this function sets hpriv->start_engine to -+ * ahci_start_engine. -+ * - * LOCKING: - * None. - */ -@@ -500,6 +503,9 @@ void ahci_save_initial_config(struct device *dev, - hpriv->cap = cap; - hpriv->cap2 = cap2; - hpriv->port_map = port_map; -+ -+ if (!hpriv->start_engine) -+ hpriv->start_engine = ahci_start_engine; - } - EXPORT_SYMBOL_GPL(ahci_save_initial_config); - -@@ -766,7 +772,7 @@ static void ahci_start_port(struct ata_port *ap) - - /* enable DMA */ - if (!(hpriv->flags & AHCI_HFLAG_DELAY_ENGINE)) -- ahci_start_engine(ap); -+ hpriv->start_engine(ap); - - /* turn on LEDs */ - if (ap->flags & ATA_FLAG_EM) { -@@ -1234,7 +1240,7 @@ int ahci_kick_engine(struct ata_port *ap) - - /* restart engine */ - out_restart: -- ahci_start_engine(ap); -+ hpriv->start_engine(ap); - return rc; - } - EXPORT_SYMBOL_GPL(ahci_kick_engine); -@@ -1426,6 +1432,7 @@ static int ahci_hardreset(struct ata_link *link, unsigned int *class, - const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context); - struct ata_port *ap = link->ap; - struct ahci_port_priv *pp = ap->private_data; -+ struct ahci_host_priv *hpriv = ap->host->private_data; - u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; - struct ata_taskfile tf; - bool online; -@@ -1443,7 +1450,7 @@ static int ahci_hardreset(struct ata_link *link, unsigned int *class, - rc = sata_link_hardreset(link, timing, deadline, &online, - ahci_check_ready); - -- ahci_start_engine(ap); -+ hpriv->start_engine(ap); - - if (online) - *class = ahci_dev_classify(ap); -@@ -2007,10 +2014,12 @@ static void ahci_thaw(struct ata_port *ap) - - void ahci_error_handler(struct ata_port *ap) - { -+ struct ahci_host_priv *hpriv = ap->host->private_data; -+ - if (!(ap->pflags & ATA_PFLAG_FROZEN)) { - /* restart engine */ - ahci_stop_engine(ap); -- ahci_start_engine(ap); -+ hpriv->start_engine(ap); - } - - sata_pmp_error_handler(ap); -@@ -2031,6 +2040,7 @@ static void ahci_post_internal_cmd(struct ata_queued_cmd *qc) - - static void ahci_set_aggressive_devslp(struct ata_port *ap, bool sleep) - { -+ struct ahci_host_priv *hpriv = ap->host->private_data; - void __iomem *port_mmio = ahci_port_base(ap); - struct ata_device *dev = ap->link.device; - u32 devslp, dm, dito, mdat, deto; -@@ -2094,7 +2104,7 @@ static void ahci_set_aggressive_devslp(struct ata_port *ap, bool sleep) - PORT_DEVSLP_ADSE); - writel(devslp, port_mmio + PORT_DEVSLP); - -- ahci_start_engine(ap); -+ hpriv->start_engine(ap); - - /* enable device sleep feature for the drive */ - err_mask = ata_dev_set_feature(dev, -@@ -2106,6 +2116,7 @@ static void ahci_set_aggressive_devslp(struct ata_port *ap, bool sleep) - - static void ahci_enable_fbs(struct ata_port *ap) - { -+ struct ahci_host_priv *hpriv = ap->host->private_data; - struct ahci_port_priv *pp = ap->private_data; - void __iomem *port_mmio = ahci_port_base(ap); - u32 fbs; -@@ -2134,11 +2145,12 @@ static void ahci_enable_fbs(struct ata_port *ap) - } else - dev_err(ap->host->dev, "Failed to enable FBS\n"); - -- ahci_start_engine(ap); -+ hpriv->start_engine(ap); - } - - static void ahci_disable_fbs(struct ata_port *ap) - { -+ struct ahci_host_priv *hpriv = ap->host->private_data; - struct ahci_port_priv *pp = ap->private_data; - void __iomem *port_mmio = ahci_port_base(ap); - u32 fbs; -@@ -2166,7 +2178,7 @@ static void ahci_disable_fbs(struct ata_port *ap) - pp->fbs_enabled = false; - } - -- ahci_start_engine(ap); -+ hpriv->start_engine(ap); - } - - static void ahci_pmp_attach(struct ata_port *ap) -diff --git a/drivers/ata/sata_highbank.c b/drivers/ata/sata_highbank.c -index 870b11e..b3b18d1 100644 ---- a/drivers/ata/sata_highbank.c -+++ b/drivers/ata/sata_highbank.c -@@ -403,6 +403,7 @@ static int ahci_highbank_hardreset(struct ata_link *link, unsigned int *class, - static const unsigned long timing[] = { 5, 100, 500}; - struct ata_port *ap = link->ap; - struct ahci_port_priv *pp = ap->private_data; -+ struct ahci_host_priv *hpriv = ap->host->private_data; - u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; - struct ata_taskfile tf; - bool online; -@@ -431,7 +432,7 @@ static int ahci_highbank_hardreset(struct ata_link *link, unsigned int *class, - break; - } while (!online && retry--); - -- ahci_start_engine(ap); -+ hpriv->start_engine(ap); - - if (online) - *class = ahci_dev_classify(ap); --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/160-5-ahci-platform-devs-with-more-than-1-clock.patch b/target/linux/sunxi/patches-3.13/160-5-ahci-platform-devs-with-more-than-1-clock.patch deleted file mode 100644 index 11d9a2c244..0000000000 --- a/target/linux/sunxi/patches-3.13/160-5-ahci-platform-devs-with-more-than-1-clock.patch +++ /dev/null @@ -1,255 +0,0 @@ -From bdad8090b5efdb24fa9db00d8e2891927b68dcec Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Thu, 16 Jan 2014 14:32:35 +0100 -Subject: [PATCH] ahci-platform: Add support for devices with more then 1 clock - -The allwinner-sun4i AHCI controller needs 2 clocks to be enabled and the -imx AHCI controller needs 3 clocks to be enabled. - -Signed-off-by: Hans de Goede ---- - .../devicetree/bindings/ata/ahci-platform.txt | 1 + - drivers/ata/ahci.h | 3 +- - drivers/ata/ahci_platform.c | 119 ++++++++++++++++----- - include/linux/ahci_platform.h | 4 + - 4 files changed, 99 insertions(+), 28 deletions(-) - -diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt -index 89de156..3ced07d 100644 ---- a/Documentation/devicetree/bindings/ata/ahci-platform.txt -+++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt -@@ -10,6 +10,7 @@ Required properties: - - Optional properties: - - dma-coherent : Present if dma operations are coherent -+- clocks : a list of phandle + clock specifier pairs - - Example: - sata@ffe08000 { -diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h -index 64d1a99d..c12862b 100644 ---- a/drivers/ata/ahci.h -+++ b/drivers/ata/ahci.h -@@ -51,6 +51,7 @@ - - enum { - AHCI_MAX_PORTS = 32, -+ AHCI_MAX_CLKS = 3, - AHCI_MAX_SG = 168, /* hardware max is 64K */ - AHCI_DMA_BOUNDARY = 0xffffffff, - AHCI_MAX_CMDS = 32, -@@ -321,7 +322,7 @@ struct ahci_host_priv { - u32 em_loc; /* enclosure management location */ - u32 em_buf_sz; /* EM buffer size in byte */ - u32 em_msg_type; /* EM message type */ -- struct clk *clk; /* Only for platforms supporting clk */ -+ struct clk *clks[AHCI_MAX_CLKS]; /* Optional */ - void *plat_data; /* Other platform data */ - /* - * Optional ahci_start_engine override, if not set this gets set to the -diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c -index 4b231ba..609975d 100644 ---- a/drivers/ata/ahci_platform.c -+++ b/drivers/ata/ahci_platform.c -@@ -87,6 +87,66 @@ struct ata_port_operations ahci_platform_ops = { - AHCI_SHT("ahci_platform"), - }; - -+/** -+ * ahci_platform_enable_clks - Enable platform clocks -+ * @hpriv: host private area to store config values -+ * -+ * This function enables all the clks found in hpriv->clks, starting -+ * at index 0. If any clk fails to enable it disables all the clks -+ * already enabled in reverse order, and then returns an error. -+ * -+ * LOCKING: -+ * None. -+ * -+ * RETURNS: -+ * 0 on success otherwise a negative error code -+ */ -+int ahci_platform_enable_clks(struct ahci_host_priv *hpriv) -+{ -+ int c, rc; -+ -+ for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++) { -+ rc = clk_prepare_enable(hpriv->clks[c]); -+ if (rc) -+ goto disable_unprepare_clk; -+ } -+ return 0; -+ -+disable_unprepare_clk: -+ while (--c >= 0) -+ clk_disable_unprepare(hpriv->clks[c]); -+ return rc; -+} -+EXPORT_SYMBOL_GPL(ahci_platform_enable_clks); -+ -+/** -+ * ahci_platform_disable_clks - Disable platform clocks -+ * @hpriv: host private area to store config values -+ * -+ * This function disables all the clks found in hpriv->clks, in reverse -+ * order of ahci_platform_enable_clks (starting at the end of the array). -+ * -+ * LOCKING: -+ * None. -+ */ -+void ahci_platform_disable_clks(struct ahci_host_priv *hpriv) -+{ -+ int c; -+ -+ for (c = AHCI_MAX_CLKS - 1; c >= 0; c--) -+ if (hpriv->clks[c]) -+ clk_disable_unprepare(hpriv->clks[c]); -+} -+EXPORT_SYMBOL_GPL(ahci_platform_disable_clks); -+ -+static void ahci_put_clks(struct ahci_host_priv *hpriv) -+{ -+ int c; -+ -+ for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++) -+ clk_put(hpriv->clks[c]); -+} -+ - static int ahci_probe(struct platform_device *pdev) - { - struct device *dev = &pdev->dev; -@@ -97,6 +157,7 @@ static int ahci_probe(struct platform_device *pdev) - struct ahci_host_priv *hpriv; - struct ata_host *host; - struct resource *mem; -+ struct clk *clk; - int irq; - int n_ports; - int i; -@@ -131,17 +192,31 @@ static int ahci_probe(struct platform_device *pdev) - return -ENOMEM; - } - -- hpriv->clk = clk_get(dev, NULL); -- if (IS_ERR(hpriv->clk)) { -- dev_err(dev, "can't get clock\n"); -- } else { -- rc = clk_prepare_enable(hpriv->clk); -- if (rc) { -- dev_err(dev, "clock prepare enable failed"); -- goto free_clk; -+ for (i = 0; i < AHCI_MAX_CLKS; i++) { -+ /* -+ * For now we must use clk_get(dev, NULL) for the first clock, -+ * because some platforms (da850, spear13xx) are not yet -+ * converted to use devicetree for clocks. For new platforms -+ * this is equivalent to of_clk_get(dev->of_node, 0). -+ */ -+ if (i == 0) -+ clk = clk_get(dev, NULL); -+ else -+ clk = of_clk_get(dev->of_node, i); -+ -+ if (IS_ERR(clk)) { -+ rc = PTR_ERR(clk); -+ if (rc == -EPROBE_DEFER) -+ goto free_clk; -+ break; - } -+ hpriv->clks[i] = clk; - } - -+ rc = ahci_enable_clks(dev, hpriv); -+ if (rc) -+ goto free_clk; -+ - /* - * Some platforms might need to prepare for mmio region access, - * which could be done in the following init call. So, the mmio -@@ -222,11 +297,9 @@ static int ahci_probe(struct platform_device *pdev) - if (pdata && pdata->exit) - pdata->exit(dev); - disable_unprepare_clk: -- if (!IS_ERR(hpriv->clk)) -- clk_disable_unprepare(hpriv->clk); -+ ahci_disable_clks(hpriv); - free_clk: -- if (!IS_ERR(hpriv->clk)) -- clk_put(hpriv->clk); -+ ahci_put_clks(hpriv); - return rc; - } - -@@ -239,10 +312,8 @@ static void ahci_host_stop(struct ata_host *host) - if (pdata && pdata->exit) - pdata->exit(dev); - -- if (!IS_ERR(hpriv->clk)) { -- clk_disable_unprepare(hpriv->clk); -- clk_put(hpriv->clk); -- } -+ ahci_disable_clks(hpriv); -+ ahci_put_clks(hpriv); - } - - #ifdef CONFIG_PM_SLEEP -@@ -277,8 +348,7 @@ static int ahci_suspend(struct device *dev) - if (pdata && pdata->suspend) - return pdata->suspend(dev); - -- if (!IS_ERR(hpriv->clk)) -- clk_disable_unprepare(hpriv->clk); -+ ahci_disable_clks(hpriv); - - return 0; - } -@@ -290,13 +360,9 @@ static int ahci_resume(struct device *dev) - struct ahci_host_priv *hpriv = host->private_data; - int rc; - -- if (!IS_ERR(hpriv->clk)) { -- rc = clk_prepare_enable(hpriv->clk); -- if (rc) { -- dev_err(dev, "clock prepare enable failed"); -- return rc; -- } -- } -+ rc = ahci_enable_clks(dev, hpriv); -+ if (rc) -+ return rc; - - if (pdata && pdata->resume) { - rc = pdata->resume(dev); -@@ -317,8 +383,7 @@ static int ahci_resume(struct device *dev) - return 0; - - disable_unprepare_clk: -- if (!IS_ERR(hpriv->clk)) -- clk_disable_unprepare(hpriv->clk); -+ ahci_disable_clks(hpriv); - - return rc; - } -diff --git a/include/linux/ahci_platform.h b/include/linux/ahci_platform.h -index 73a2500..769d065 100644 ---- a/include/linux/ahci_platform.h -+++ b/include/linux/ahci_platform.h -@@ -19,6 +19,7 @@ - - struct device; - struct ata_port_info; -+struct ahci_host_priv; - - struct ahci_platform_data { - int (*init)(struct device *dev, void __iomem *addr); -@@ -30,4 +31,7 @@ struct ahci_platform_data { - unsigned int mask_port_map; - }; - -+int ahci_platform_enable_clks(struct ahci_host_priv *hpriv); -+void ahci_platform_disable_clks(struct ahci_host_priv *hpriv); -+ - #endif /* _AHCI_PLATFORM_H */ --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/160-6-ahci-platform-support-optional-regulator.patch b/target/linux/sunxi/patches-3.13/160-6-ahci-platform-support-optional-regulator.patch deleted file mode 100644 index fad0a7fae2..0000000000 --- a/target/linux/sunxi/patches-3.13/160-6-ahci-platform-support-optional-regulator.patch +++ /dev/null @@ -1,141 +0,0 @@ -From ba6850946d9e1959be1b00f6ae06454546350c75 Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Fri, 17 Jan 2014 13:23:21 +0100 -Subject: [PATCH] ahci-platform: Add support for an optional regulator for - sata-target power - -Signed-off-by: Hans de Goede ---- - .../devicetree/bindings/ata/ahci-platform.txt | 1 + - drivers/ata/ahci.h | 2 ++ - drivers/ata/ahci_platform.c | 36 ++++++++++++++++++++-- - 3 files changed, 37 insertions(+), 2 deletions(-) - -diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt -index 3ced07d..1ac807f 100644 ---- a/Documentation/devicetree/bindings/ata/ahci-platform.txt -+++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt -@@ -11,6 +11,7 @@ Required properties: - Optional properties: - - dma-coherent : Present if dma operations are coherent - - clocks : a list of phandle + clock specifier pairs -+- target-supply : regulator for SATA target power - - Example: - sata@ffe08000 { -diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h -index c12862b..bf8100c 100644 ---- a/drivers/ata/ahci.h -+++ b/drivers/ata/ahci.h -@@ -37,6 +37,7 @@ - - #include - #include -+#include - - /* Enclosure Management Control */ - #define EM_CTRL_MSG_TYPE 0x000f0000 -@@ -323,6 +324,7 @@ struct ahci_host_priv { - u32 em_buf_sz; /* EM buffer size in byte */ - u32 em_msg_type; /* EM message type */ - struct clk *clks[AHCI_MAX_CLKS]; /* Optional */ -+ struct regulator *target_pwr; /* Optional */ - void *plat_data; /* Other platform data */ - /* - * Optional ahci_start_engine override, if not set this gets set to the -diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c -index 609975d..907c076 100644 ---- a/drivers/ata/ahci_platform.c -+++ b/drivers/ata/ahci_platform.c -@@ -192,6 +192,14 @@ static int ahci_probe(struct platform_device *pdev) - return -ENOMEM; - } - -+ hpriv->target_pwr = devm_regulator_get_optional(dev, "target"); -+ if (IS_ERR(hpriv->target_pwr)) { -+ rc = PTR_ERR(hpriv->target_pwr); -+ if (rc == -EPROBE_DEFER) -+ return -EPROBE_DEFER; -+ hpriv->target_pwr = NULL; -+ } -+ - for (i = 0; i < AHCI_MAX_CLKS; i++) { - /* - * For now we must use clk_get(dev, NULL) for the first clock, -@@ -213,9 +221,15 @@ static int ahci_probe(struct platform_device *pdev) - hpriv->clks[i] = clk; - } - -+ if (hpriv->target_pwr) { -+ rc = regulator_enable(hpriv->target_pwr); -+ if (rc) -+ goto free_clk; -+ } -+ - rc = ahci_enable_clks(dev, hpriv); - if (rc) -- goto free_clk; -+ goto disable_regulator; - - /* - * Some platforms might need to prepare for mmio region access, -@@ -298,6 +312,9 @@ static int ahci_probe(struct platform_device *pdev) - pdata->exit(dev); - disable_unprepare_clk: - ahci_disable_clks(hpriv); -+disable_regulator: -+ if (hpriv->target_pwr) -+ regulator_disable(hpriv->target_pwr); - free_clk: - ahci_put_clks(hpriv); - return rc; -@@ -314,6 +331,9 @@ static void ahci_host_stop(struct ata_host *host) - - ahci_disable_clks(hpriv); - ahci_put_clks(hpriv); -+ -+ if (hpriv->target_pwr) -+ regulator_disable(hpriv->target_pwr); - } - - #ifdef CONFIG_PM_SLEEP -@@ -350,6 +370,9 @@ static int ahci_suspend(struct device *dev) - - ahci_disable_clks(hpriv); - -+ if (hpriv->target_pwr) -+ regulator_disable(hpriv->target_pwr); -+ - return 0; - } - -@@ -360,9 +383,15 @@ static int ahci_resume(struct device *dev) - struct ahci_host_priv *hpriv = host->private_data; - int rc; - -+ if (hpriv->target_pwr) { -+ rc = regulator_enable(hpriv->target_pwr); -+ if (rc) -+ return rc; -+ } -+ - rc = ahci_enable_clks(dev, hpriv); - if (rc) -- return rc; -+ goto disable_regulator; - - if (pdata && pdata->resume) { - rc = pdata->resume(dev); -@@ -384,6 +413,9 @@ static int ahci_resume(struct device *dev) - - disable_unprepare_clk: - ahci_disable_clks(hpriv); -+disable_regulator: -+ if (hpriv->target_pwr) -+ regulator_disable(hpriv->target_pwr); - - return rc; - } --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/160-7-ahci-platform-add-resource-helpers.patch b/target/linux/sunxi/patches-3.13/160-7-ahci-platform-add-resource-helpers.patch deleted file mode 100644 index 0fdc87dd94..0000000000 --- a/target/linux/sunxi/patches-3.13/160-7-ahci-platform-add-resource-helpers.patch +++ /dev/null @@ -1,211 +0,0 @@ -From 05d5a60ae336c122e478cc002afccc880d462b3b Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Mon, 20 Jan 2014 14:54:40 +0100 -Subject: [PATCH] ahci-platform: Add enable_ / disable_resources helper - functions - -Signed-off-by: Hans de Goede ---- - drivers/ata/ahci_platform.c | 112 ++++++++++++++++++++++++++++-------------- - include/linux/ahci_platform.h | 2 + - 2 files changed, 77 insertions(+), 37 deletions(-) - -diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c -index 907c076..6ebbc17 100644 ---- a/drivers/ata/ahci_platform.c -+++ b/drivers/ata/ahci_platform.c -@@ -139,6 +139,68 @@ void ahci_platform_disable_clks(struct ahci_host_priv *hpriv) - } - EXPORT_SYMBOL_GPL(ahci_platform_disable_clks); - -+/** -+ * ahci_platform_enable_resources - Enable platform resources -+ * @hpriv: host private area to store config values -+ * -+ * This function enables all ahci_platform managed resources in -+ * the following order: -+ * 1) Regulator -+ * 2) Clocks (through ahci_platform_enable_clks) -+ * -+ * If resource enabling fails at any point the previous enabled -+ * resources are disabled in reverse order. -+ * -+ * LOCKING: -+ * None. -+ * -+ * RETURNS: -+ * 0 on success otherwise a negative error code -+ */ -+int ahci_platform_enable_resources(struct ahci_host_priv *hpriv) -+{ -+ int rc; -+ -+ if (hpriv->target_pwr) { -+ rc = regulator_enable(hpriv->target_pwr); -+ if (rc) -+ return rc; -+ } -+ -+ rc = ahci_platform_enable_clks(hpriv); -+ if (rc) -+ goto disable_regulator; -+ -+ return 0; -+ -+disable_regulator: -+ if (hpriv->target_pwr) -+ regulator_disable(hpriv->target_pwr); -+ return rc; -+} -+EXPORT_SYMBOL_GPL(ahci_platform_enable_resources); -+ -+/** -+ * ahci_platform_disable_resources - Disable platform resources -+ * @hpriv: host private area to store config values -+ * -+ * This function disables all ahci_platform managed resources in -+ * the following order: -+ * 1) Clocks (through ahci_platform_disable_clks) -+ * 2) Regulator -+ * -+ * LOCKING: -+ * None. -+ */ -+void ahci_platform_disable_resources(struct ahci_host_priv *hpriv) -+{ -+ ahci_platform_disable_clks(hpriv); -+ -+ if (hpriv->target_pwr) -+ regulator_disable(hpriv->target_pwr); -+} -+EXPORT_SYMBOL_GPL(ahci_platform_disable_resources); -+ - static void ahci_put_clks(struct ahci_host_priv *hpriv) - { - int c; -@@ -221,15 +283,9 @@ static int ahci_probe(struct platform_device *pdev) - hpriv->clks[i] = clk; - } - -- if (hpriv->target_pwr) { -- rc = regulator_enable(hpriv->target_pwr); -- if (rc) -- goto free_clk; -- } -- -- rc = ahci_enable_clks(dev, hpriv); -+ rc = ahci_platform_enable_resources(hpriv); - if (rc) -- goto disable_regulator; -+ goto free_clk; - - /* - * Some platforms might need to prepare for mmio region access, -@@ -240,7 +296,7 @@ static int ahci_probe(struct platform_device *pdev) - if (pdata && pdata->init) { - rc = pdata->init(dev, hpriv->mmio); - if (rc) -- goto disable_unprepare_clk; -+ goto disable_resources; - } - - ahci_save_initial_config(dev, hpriv, -@@ -310,11 +366,8 @@ static int ahci_probe(struct platform_device *pdev) - pdata_exit: - if (pdata && pdata->exit) - pdata->exit(dev); --disable_unprepare_clk: -- ahci_disable_clks(hpriv); --disable_regulator: -- if (hpriv->target_pwr) -- regulator_disable(hpriv->target_pwr); -+disable_resources: -+ ahci_platform_disable_resources(hpriv); - free_clk: - ahci_put_clks(hpriv); - return rc; -@@ -329,11 +382,8 @@ static void ahci_host_stop(struct ata_host *host) - if (pdata && pdata->exit) - pdata->exit(dev); - -- ahci_disable_clks(hpriv); -+ ahci_platform_disable_resources(hpriv); - ahci_put_clks(hpriv); -- -- if (hpriv->target_pwr) -- regulator_disable(hpriv->target_pwr); - } - - #ifdef CONFIG_PM_SLEEP -@@ -368,10 +418,7 @@ static int ahci_suspend(struct device *dev) - if (pdata && pdata->suspend) - return pdata->suspend(dev); - -- ahci_disable_clks(hpriv); -- -- if (hpriv->target_pwr) -- regulator_disable(hpriv->target_pwr); -+ ahci_platform_disable_resources(hpriv); - - return 0; - } -@@ -383,26 +430,20 @@ static int ahci_resume(struct device *dev) - struct ahci_host_priv *hpriv = host->private_data; - int rc; - -- if (hpriv->target_pwr) { -- rc = regulator_enable(hpriv->target_pwr); -- if (rc) -- return rc; -- } -- -- rc = ahci_enable_clks(dev, hpriv); -+ rc = ahci_platform_enable_resources(hpriv); - if (rc) -- goto disable_regulator; -+ return rc; - - if (pdata && pdata->resume) { - rc = pdata->resume(dev); - if (rc) -- goto disable_unprepare_clk; -+ goto disable_resources; - } - - if (dev->power.power_state.event == PM_EVENT_SUSPEND) { - rc = ahci_reset_controller(host); - if (rc) -- goto disable_unprepare_clk; -+ goto disable_resources; - - ahci_init_controller(host); - } -@@ -411,11 +452,8 @@ static int ahci_resume(struct device *dev) - - return 0; - --disable_unprepare_clk: -- ahci_disable_clks(hpriv); --disable_regulator: -- if (hpriv->target_pwr) -- regulator_disable(hpriv->target_pwr); -+disable_resources: -+ ahci_platform_disable_resources(hpriv); - - return rc; - } -diff --git a/include/linux/ahci_platform.h b/include/linux/ahci_platform.h -index 769d065..b674b01 100644 ---- a/include/linux/ahci_platform.h -+++ b/include/linux/ahci_platform.h -@@ -33,5 +33,7 @@ struct ahci_platform_data { - - int ahci_platform_enable_clks(struct ahci_host_priv *hpriv); - void ahci_platform_disable_clks(struct ahci_host_priv *hpriv); -+int ahci_platform_enable_resources(struct ahci_host_priv *hpriv); -+void ahci_platform_disable_resources(struct ahci_host_priv *hpriv); - - #endif /* _AHCI_PLATFORM_H */ --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/160-8-ahci-plat-libraryise-ahci_probe.patch b/target/linux/sunxi/patches-3.13/160-8-ahci-plat-libraryise-ahci_probe.patch deleted file mode 100644 index 8f0ba4c2cd..0000000000 --- a/target/linux/sunxi/patches-3.13/160-8-ahci-plat-libraryise-ahci_probe.patch +++ /dev/null @@ -1,344 +0,0 @@ -From 98601575da5276173233dd575bdd61cccdeb861a Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Mon, 20 Jan 2014 14:58:04 +0100 -Subject: [PATCH] ahci-platform: "Library-ise" ahci_probe functionality - -ahci_probe consists of 3 steps: -1) Get resources (get mmio, clks, regulator) -2) Enable resources, handled by ahci_platform_enable_resouces -3) The more or less standard ahci-host controller init sequence - -This commit refactors step 1 and 3 into separate functions, so the platform -drivers for AHCI implementations which need a specific order in step 2, -and / or need to do some custom register poking at some time, can re-use -ahci-platform.c code without needing to copy and paste it. - -Note that ahci_platform_init_host's prototype takes the 3 non function -members of ahci_platform_data as arguments, the idea is that drivers using -the new exported utility functions will not use ahci_platform_data at all, -and hopefully in the future ahci_platform_data can go away entirely. - -Signed-off-by: Hans de Goede ---- - drivers/ata/ahci_platform.c | 195 ++++++++++++++++++++++++++++-------------- - include/linux/ahci_platform.h | 14 +++ - 2 files changed, 144 insertions(+), 65 deletions(-) - -diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c -index 6ebbc17..7f3f2ac 100644 ---- a/drivers/ata/ahci_platform.c -+++ b/drivers/ata/ahci_platform.c -@@ -201,64 +201,64 @@ void ahci_platform_disable_resources(struct ahci_host_priv *hpriv) - } - EXPORT_SYMBOL_GPL(ahci_platform_disable_resources); - --static void ahci_put_clks(struct ahci_host_priv *hpriv) -+static void ahci_platform_put_resources(struct device *dev, void *res) - { -+ struct ahci_host_priv *hpriv = res; - int c; - - for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++) - clk_put(hpriv->clks[c]); - } - --static int ahci_probe(struct platform_device *pdev) -+/** -+ * ahci_platform_get_resources - Get platform resources -+ * @pdev: platform device to get resources for -+ * -+ * This function allocates an ahci_host_priv struct, and gets the -+ * following resources, storing a reference to them inside the returned -+ * struct: -+ * -+ * 1) mmio registers (IORESOURCE_MEM 0, mandatory) -+ * 2) regulator for controlling the targets power (optional) -+ * 3) 0 - AHCI_MAX_CLKS clocks, as specified in the devs devicetree node, -+ * or for non devicetree enabled platforms a single clock -+ * -+ * LOCKING: -+ * None. -+ * -+ * RETURNS: -+ * The allocated ahci_host_priv on success, otherwise an ERR_PTR value -+ */ -+struct ahci_host_priv *ahci_platform_get_resources( -+ struct platform_device *pdev) - { - struct device *dev = &pdev->dev; -- struct ahci_platform_data *pdata = dev_get_platdata(dev); -- const struct platform_device_id *id = platform_get_device_id(pdev); -- struct ata_port_info pi = ahci_port_info[id ? id->driver_data : 0]; -- const struct ata_port_info *ppi[] = { &pi, NULL }; - struct ahci_host_priv *hpriv; -- struct ata_host *host; -- struct resource *mem; - struct clk *clk; -- int irq; -- int n_ports; -- int i; -- int rc; -+ int i, rc = -ENOMEM; - -- mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); -- if (!mem) { -- dev_err(dev, "no mmio space\n"); -- return -EINVAL; -- } -+ if (!devres_open_group(dev, NULL, GFP_KERNEL)) -+ return ERR_PTR(-ENOMEM); - -- irq = platform_get_irq(pdev, 0); -- if (irq <= 0) { -- dev_err(dev, "no irq\n"); -- return -EINVAL; -- } -+ hpriv = devres_alloc(ahci_platform_put_resources, sizeof(*hpriv), -+ GFP_KERNEL); -+ if (!hpriv) -+ goto err_out; - -- if (pdata && pdata->ata_port_info) -- pi = *pdata->ata_port_info; -+ devres_add(dev, hpriv); - -- hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL); -- if (!hpriv) { -- dev_err(dev, "can't alloc ahci_host_priv\n"); -- return -ENOMEM; -- } -- -- hpriv->flags |= (unsigned long)pi.private_data; -- -- hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem)); -+ hpriv->mmio = devm_ioremap_resource(dev, -+ platform_get_resource(pdev, IORESOURCE_MEM, 0)); - if (!hpriv->mmio) { -- dev_err(dev, "can't map %pR\n", mem); -- return -ENOMEM; -+ dev_err(dev, "no mmio space\n"); -+ goto err_out; - } - - hpriv->target_pwr = devm_regulator_get_optional(dev, "target"); - if (IS_ERR(hpriv->target_pwr)) { - rc = PTR_ERR(hpriv->target_pwr); - if (rc == -EPROBE_DEFER) -- return -EPROBE_DEFER; -+ goto err_out; - hpriv->target_pwr = NULL; - } - -@@ -277,33 +277,62 @@ static int ahci_probe(struct platform_device *pdev) - if (IS_ERR(clk)) { - rc = PTR_ERR(clk); - if (rc == -EPROBE_DEFER) -- goto free_clk; -+ goto err_out; - break; - } - hpriv->clks[i] = clk; - } - -- rc = ahci_platform_enable_resources(hpriv); -- if (rc) -- goto free_clk; -+ devres_remove_group(dev, NULL); -+ return hpriv; - -- /* -- * Some platforms might need to prepare for mmio region access, -- * which could be done in the following init call. So, the mmio -- * region shouldn't be accessed before init (if provided) has -- * returned successfully. -- */ -- if (pdata && pdata->init) { -- rc = pdata->init(dev, hpriv->mmio); -- if (rc) -- goto disable_resources; -- } -+err_out: -+ devres_release_group(dev, NULL); -+ return ERR_PTR(rc); -+} -+EXPORT_SYMBOL_GPL(ahci_platform_get_resources); -+ -+/** -+ * ahci_platform_init_host - Bring up an ahci-platform host -+ * @pdev: platform device pointer for the host -+ * @hpriv: ahci-host private data for the host -+ * @pi_template: template for the ata_port_info to use -+ * @force_port_map: param passed to ahci_save_initial_config -+ * @mask_port_map: param passed to ahci_save_initial_config -+ * -+ * This function does all the usual steps needed to bring up an -+ * ahci-platform host, note any necessary resources (ie clks, phy, etc.) -+ * must be initialized / enabled before calling this. -+ * -+ * LOCKING: -+ * None. -+ * -+ * RETURNS: -+ * 0 on success otherwise a negative error code -+ */ -+int ahci_platform_init_host(struct platform_device *pdev, -+ struct ahci_host_priv *hpriv, -+ const struct ata_port_info *pi_template, -+ unsigned int force_port_map, -+ unsigned int mask_port_map) -+{ -+ struct device *dev = &pdev->dev; -+ struct ata_port_info pi = *pi_template; -+ const struct ata_port_info *ppi[] = { &pi, NULL }; -+ struct ata_host *host; -+ int i, irq, n_ports, rc; - -- ahci_save_initial_config(dev, hpriv, -- pdata ? pdata->force_port_map : 0, -- pdata ? pdata->mask_port_map : 0); -+ irq = platform_get_irq(pdev, 0); -+ if (irq <= 0) { -+ dev_err(dev, "no irq\n"); -+ return -EINVAL; -+ } - - /* prepare host */ -+ hpriv->flags |= (unsigned long)pi.private_data; -+ -+ ahci_save_initial_config(dev, hpriv, force_port_map, mask_port_map); -+ - if (hpriv->cap & HOST_CAP_NCQ) - pi.flags |= ATA_FLAG_NCQ; - -@@ -320,10 +349,8 @@ static int ahci_probe(struct platform_device *pdev) - n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map)); - - host = ata_host_alloc_pinfo(dev, ppi, n_ports); -- if (!host) { -- rc = -ENOMEM; -- goto pdata_exit; -- } -+ if (!host) -+ return -ENOMEM; - - host->private_data = hpriv; - -@@ -338,7 +365,8 @@ static int ahci_probe(struct platform_device *pdev) - for (i = 0; i < host->n_ports; i++) { - struct ata_port *ap = host->ports[i]; - -- ata_port_desc(ap, "mmio %pR", mem); -+ ata_port_desc(ap, "mmio %pR", -+ platform_get_resource(pdev, IORESOURCE_MEM, 0)); - ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80); - - /* set enclosure management message type */ -@@ -352,13 +380,53 @@ static int ahci_probe(struct platform_device *pdev) - - rc = ahci_reset_controller(host); - if (rc) -- goto pdata_exit; -+ return rc; - - ahci_init_controller(host); - ahci_print_info(host, "platform"); - -- rc = ata_host_activate(host, irq, ahci_interrupt, IRQF_SHARED, -- &ahci_platform_sht); -+ return ata_host_activate(host, irq, ahci_interrupt, IRQF_SHARED, -+ &ahci_platform_sht); -+} -+EXPORT_SYMBOL_GPL(ahci_platform_init_host); -+ -+static int ahci_probe(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct ahci_platform_data *pdata = dev_get_platdata(dev); -+ const struct platform_device_id *id = platform_get_device_id(pdev); -+ const struct ata_port_info *pi_template; -+ struct ahci_host_priv *hpriv; -+ int rc; -+ -+ hpriv = ahci_platform_get_resources(pdev); -+ if (IS_ERR(hpriv)) -+ return PTR_ERR(hpriv); -+ -+ rc = ahci_platform_enable_resources(hpriv); -+ if (rc) -+ return rc; -+ -+ /* -+ * Some platforms might need to prepare for mmio region access, -+ * which could be done in the following init call. So, the mmio -+ * region shouldn't be accessed before init (if provided) has -+ * returned successfully. -+ */ -+ if (pdata && pdata->init) { -+ rc = pdata->init(dev, hpriv->mmio); -+ if (rc) -+ goto disable_resources; -+ } -+ -+ if (pdata && pdata->ata_port_info) -+ pi_template = pdata->ata_port_info; -+ else -+ pi_template = &ahci_port_info[id ? id->driver_data : 0]; -+ -+ rc = ahci_platform_init_host(pdev, hpriv, pi_template, -+ pdata ? pdata->force_port_map : 0, -+ pdata ? pdata->mask_port_map : 0); - if (rc) - goto pdata_exit; - -@@ -368,8 +436,6 @@ static int ahci_probe(struct platform_device *pdev) - pdata->exit(dev); - disable_resources: - ahci_platform_disable_resources(hpriv); --free_clk: -- ahci_put_clks(hpriv); - return rc; - } - -@@ -383,7 +449,6 @@ static void ahci_host_stop(struct ata_host *host) - pdata->exit(dev); - - ahci_platform_disable_resources(hpriv); -- ahci_put_clks(hpriv); - } - - #ifdef CONFIG_PM_SLEEP -diff --git a/include/linux/ahci_platform.h b/include/linux/ahci_platform.h -index b674b01..b80c51c 100644 ---- a/include/linux/ahci_platform.h -+++ b/include/linux/ahci_platform.h -@@ -20,7 +20,14 @@ - struct device; - struct ata_port_info; - struct ahci_host_priv; -+struct platform_device; - -+/* -+ * Note ahci_platform_data is deprecated, it is only kept around for use -+ * by the old da850 and spear13xx ahci code. -+ * New drivers should instead declare their own platform_driver struct, and -+ * use ahci_platform* functions in their own probe, suspend and resume methods. -+ */ - struct ahci_platform_data { - int (*init)(struct device *dev, void __iomem *addr); - void (*exit)(struct device *dev); -@@ -35,5 +42,12 @@ struct ahci_platform_data { - void ahci_platform_disable_clks(struct ahci_host_priv *hpriv); - int ahci_platform_enable_resources(struct ahci_host_priv *hpriv); - void ahci_platform_disable_resources(struct ahci_host_priv *hpriv); -+struct ahci_host_priv *ahci_platform_get_resources( -+ struct platform_device *pdev); -+int ahci_platform_init_host(struct platform_device *pdev, -+ struct ahci_host_priv *hpriv, -+ const struct ata_port_info *pi_template, -+ unsigned int force_port_map, -+ unsigned int mask_port_map); - - #endif /* _AHCI_PLATFORM_H */ --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/160-9-ahci-plat-libraryise-suspend-resume.patch b/target/linux/sunxi/patches-3.13/160-9-ahci-plat-libraryise-suspend-resume.patch deleted file mode 100644 index 49ddac0b5e..0000000000 --- a/target/linux/sunxi/patches-3.13/160-9-ahci-plat-libraryise-suspend-resume.patch +++ /dev/null @@ -1,188 +0,0 @@ -From 041cf8356a4eb91ee8118004b2bc9c78cdd7866c Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Mon, 20 Jan 2014 15:52:07 +0100 -Subject: [PATCH] ahci-platform: "Library-ise" suspend / resume functionality - -Split suspend / resume code into host suspend / resume functionality and -resource enable / disabling phases, and export the new suspend_ / resume_host -functions. - -Signed-off-by: Hans de Goede ---- - drivers/ata/ahci_platform.c | 109 ++++++++++++++++++++++++++++++++++++------ - include/linux/ahci_platform.h | 5 ++ - 2 files changed, 99 insertions(+), 15 deletions(-) - -diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c -index 7f3f2ac..bdadec1 100644 ---- a/drivers/ata/ahci_platform.c -+++ b/drivers/ata/ahci_platform.c -@@ -452,14 +452,26 @@ static void ahci_host_stop(struct ata_host *host) - } - - #ifdef CONFIG_PM_SLEEP --static int ahci_suspend(struct device *dev) -+/** -+ * ahci_platform_suspend_host - Suspend an ahci-platform host -+ * @dev: device pointer for the host -+ * -+ * This function does all the usual steps needed to suspend an -+ * ahci-platform host, note any necessary resources (ie clks, phy, etc.) -+ * must be disabled after calling this. -+ * -+ * LOCKING: -+ * None. -+ * -+ * RETURNS: -+ * 0 on success otherwise a negative error code -+ */ -+int ahci_platform_suspend_host(struct device *dev) - { -- struct ahci_platform_data *pdata = dev_get_platdata(dev); - struct ata_host *host = dev_get_drvdata(dev); - struct ahci_host_priv *hpriv = host->private_data; - void __iomem *mmio = hpriv->mmio; - u32 ctl; -- int rc; - - if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) { - dev_err(dev, "firmware update required for suspend/resume\n"); -@@ -476,7 +488,64 @@ static int ahci_suspend(struct device *dev) - writel(ctl, mmio + HOST_CTL); - readl(mmio + HOST_CTL); /* flush */ - -- rc = ata_host_suspend(host, PMSG_SUSPEND); -+ return ata_host_suspend(host, PMSG_SUSPEND); -+} -+EXPORT_SYMBOL_GPL(ahci_platform_suspend_host); -+ -+/** -+ * ahci_platform_resume_host - Resume an ahci-platform host -+ * @dev: device pointer for the host -+ * -+ * This function does all the usual steps needed to resume an -+ * ahci-platform host, note any necessary resources (ie clks, phy, etc.) -+ * must be initialized / enabled before calling this. -+ * -+ * LOCKING: -+ * None. -+ * -+ * RETURNS: -+ * 0 on success otherwise a negative error code -+ */ -+int ahci_platform_resume_host(struct device *dev) -+{ -+ struct ata_host *host = dev_get_drvdata(dev); -+ int rc; -+ -+ if (dev->power.power_state.event == PM_EVENT_SUSPEND) { -+ rc = ahci_reset_controller(host); -+ if (rc) -+ return rc; -+ -+ ahci_init_controller(host); -+ } -+ -+ ata_host_resume(host); -+ -+ return 0; -+} -+EXPORT_SYMBOL_GPL(ahci_platform_resume_host); -+ -+/** -+ * ahci_platform_suspend - Suspend an ahci-platform device -+ * @dev: the platform device to suspend -+ * -+ * This function suspends the host associated with the device, followed -+ * by disabling all the resources of the device. -+ * -+ * LOCKING: -+ * None. -+ * -+ * RETURNS: -+ * 0 on success otherwise a negative error code -+ */ -+int ahci_platform_suspend(struct device *dev) -+{ -+ struct ahci_platform_data *pdata = dev_get_platdata(dev); -+ struct ata_host *host = dev_get_drvdata(dev); -+ struct ahci_host_priv *hpriv = host->private_data; -+ int rc; -+ -+ rc = ahci_platform_suspend_host(dev); - if (rc) - return rc; - -@@ -487,8 +556,22 @@ static int ahci_suspend(struct device *dev) - - return 0; - } -+EXPORT_SYMBOL_GPL(ahci_platform_suspend); - --static int ahci_resume(struct device *dev) -+/** -+ * ahci_platform_resume - Resume an ahci-platform device -+ * @dev: the platform device to resume -+ * -+ * This function enables all the resources of the device followed by -+ * resuming the host associated with the device. -+ * -+ * LOCKING: -+ * None. -+ * -+ * RETURNS: -+ * 0 on success otherwise a negative error code -+ */ -+int ahci_platform_resume(struct device *dev) - { - struct ahci_platform_data *pdata = dev_get_platdata(dev); - struct ata_host *host = dev_get_drvdata(dev); -@@ -505,15 +588,9 @@ static int ahci_resume(struct device *dev) - goto disable_resources; - } - -- if (dev->power.power_state.event == PM_EVENT_SUSPEND) { -- rc = ahci_reset_controller(host); -- if (rc) -- goto disable_resources; -- -- ahci_init_controller(host); -- } -- -- ata_host_resume(host); -+ rc = ahci_platform_resume_host(dev); -+ if (rc) -+ goto disable_resources; - - return 0; - -@@ -522,9 +599,11 @@ static int ahci_resume(struct device *dev) - - return rc; - } -+EXPORT_SYMBOL_GPL(ahci_platform_resume); - #endif - --static SIMPLE_DEV_PM_OPS(ahci_pm_ops, ahci_suspend, ahci_resume); -+static SIMPLE_DEV_PM_OPS(ahci_pm_ops, ahci_platform_suspend, -+ ahci_platform_resume); - - static const struct of_device_id ahci_of_match[] = { - { .compatible = "snps,spear-ahci", }, -diff --git a/include/linux/ahci_platform.h b/include/linux/ahci_platform.h -index b80c51c..542f268 100644 ---- a/include/linux/ahci_platform.h -+++ b/include/linux/ahci_platform.h -@@ -50,4 +50,9 @@ int ahci_platform_init_host(struct platform_device *pdev, - unsigned int force_port_map, - unsigned int mask_port_map); - -+int ahci_platform_suspend_host(struct device *dev); -+int ahci_platform_resume_host(struct device *dev); -+int ahci_platform_suspend(struct device *dev); -+int ahci_platform_resume(struct device *dev); -+ - #endif /* _AHCI_PLATFORM_H */ --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/161-ahci-add-sunxi-to-ahci_platform.patch b/target/linux/sunxi/patches-3.13/161-ahci-add-sunxi-to-ahci_platform.patch deleted file mode 100644 index b7c9064d33..0000000000 --- a/target/linux/sunxi/patches-3.13/161-ahci-add-sunxi-to-ahci_platform.patch +++ /dev/null @@ -1,352 +0,0 @@ -From 93dd2c512a24c552f1146d746aac112da7677430 Mon Sep 17 00:00:00 2001 -From: Olliver Schinagl -Date: Sat, 18 Jan 2014 15:00:45 +0100 -Subject: [PATCH] ARM: sunxi: Add support for Allwinner SUNXi SoCs sata to - ahci_platform - -This patch adds support for the ahci sata controler found on Allwinner A10 -and A20 SoCs to the ahci_platform driver. - -Orignally written by Olliver Schinagl using the approach of having a platform -device which probe method creates a new child platform device which gets -driven by ahci_platform.c, as done by ahci_imx.c . - -Refactored by Hans de Goede to add most of the non sunxi specific functionality -to ahci_platform.c and use a platform_data pointer from of_device_id for the -sunxi specific bits. - -Signed-off-by: Olliver Schinagl -Signed-off-by: Hans de Goede ---- - .../devicetree/bindings/ata/ahci-platform.txt | 15 +- - drivers/ata/Kconfig | 9 + - drivers/ata/Makefile | 1 + - drivers/ata/ahci_sunxi.c | 249 +++++++++++++++++++++ - 4 files changed, 271 insertions(+), 3 deletions(-) - create mode 100644 drivers/ata/ahci_sunxi.c - -diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt -index 1ac807f..499bfed 100644 ---- a/Documentation/devicetree/bindings/ata/ahci-platform.txt -+++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt -@@ -4,7 +4,9 @@ SATA nodes are defined to describe on-chip Serial ATA controllers. - Each SATA controller should have its own node. - - Required properties: --- compatible : compatible list, contains "snps,spear-ahci" -+- compatible : compatible list, one of "snps,spear-ahci", -+ "snps,exynos5440-ahci", "ibm,476gtr-ahci", or -+ "allwinner,sun4i-a10-ahci" - - interrupts : - - reg : - -@@ -13,10 +15,17 @@ Optional properties: - - clocks : a list of phandle + clock specifier pairs - - target-supply : regulator for SATA target power - --Example: -+Examples: - sata@ffe08000 { - compatible = "snps,spear-ahci"; - reg = <0xffe08000 0x1000>; - interrupts = <115>; -- - }; -+ -+ ahci: sata@01c18000 { -+ compatible = "allwinner,sun4i-a10-ahci"; -+ reg = <0x01c18000 0x1000>; -+ interrupts = <56>; -+ clocks = <&pll6 0>, <&ahb_gates 25>; -+ target-supply = <®_ahci_5v>; -+ }; -diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig -index 4e73772..cc67cc0 100644 ---- a/drivers/ata/Kconfig -+++ b/drivers/ata/Kconfig -@@ -106,6 +106,15 @@ config AHCI_IMX - - If unsure, say N. - -+config AHCI_SUNXI -+ tristate "Allwinner sunxi AHCI SATA support" -+ depends on ARCH_SUNXI && SATA_AHCI_PLATFORM -+ help -+ This option enables support for the Allwinner sunxi SoC's -+ onboard AHCI SATA. -+ -+ If unsure, say N. -+ - config SATA_FSL - tristate "Freescale 3.0Gbps SATA support" - depends on FSL_SOC -diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile -index 46518c6..246050b 100644 ---- a/drivers/ata/Makefile -+++ b/drivers/ata/Makefile -@@ -11,6 +11,7 @@ obj-$(CONFIG_SATA_SIL24) += sata_sil24.o - obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o - obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o libahci.o - obj-$(CONFIG_AHCI_IMX) += ahci_imx.o -+obj-$(CONFIG_AHCI_SUNXI) += ahci_sunxi.o - - # SFF w/ custom DMA - obj-$(CONFIG_PDC_ADMA) += pdc_adma.o -diff --git a/drivers/ata/ahci_sunxi.c b/drivers/ata/ahci_sunxi.c -new file mode 100644 -index 0000000..001f7dfc ---- /dev/null -+++ b/drivers/ata/ahci_sunxi.c -@@ -0,0 +1,249 @@ -+/* -+ * Allwinner sunxi AHCI SATA platform driver -+ * Copyright 2013 Olliver Schinagl -+ * Copyright 2014 Hans de Goede -+ * -+ * based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov -+ * Based on code from Allwinner Technology Co., Ltd. , -+ * Daniel Wang -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms and conditions of the GNU General Public License, -+ * version 2, as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope it will be useful, but WITHOUT -+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -+ * more details. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include "ahci.h" -+ -+#define AHCI_BISTAFR 0x00a0 -+#define AHCI_BISTCR 0x00a4 -+#define AHCI_BISTFCTR 0x00a8 -+#define AHCI_BISTSR 0x00ac -+#define AHCI_BISTDECR 0x00b0 -+#define AHCI_DIAGNR0 0x00b4 -+#define AHCI_DIAGNR1 0x00b8 -+#define AHCI_OOBR 0x00bc -+#define AHCI_PHYCS0R 0x00c0 -+#define AHCI_PHYCS1R 0x00c4 -+#define AHCI_PHYCS2R 0x00c8 -+#define AHCI_TIMER1MS 0x00e0 -+#define AHCI_GPARAM1R 0x00e8 -+#define AHCI_GPARAM2R 0x00ec -+#define AHCI_PPARAMR 0x00f0 -+#define AHCI_TESTR 0x00f4 -+#define AHCI_VERSIONR 0x00f8 -+#define AHCI_IDR 0x00fc -+#define AHCI_RWCR 0x00fc -+#define AHCI_P0DMACR 0x0170 -+#define AHCI_P0PHYCR 0x0178 -+#define AHCI_P0PHYSR 0x017c -+ -+static void sunxi_clrbits(void __iomem *reg, u32 clr_val) -+{ -+ u32 reg_val; -+ -+ reg_val = readl(reg); -+ reg_val &= ~(clr_val); -+ writel(reg_val, reg); -+} -+ -+static void sunxi_setbits(void __iomem *reg, u32 set_val) -+{ -+ u32 reg_val; -+ -+ reg_val = readl(reg); -+ reg_val |= set_val; -+ writel(reg_val, reg); -+} -+ -+static void sunxi_clrsetbits(void __iomem *reg, u32 clr_val, u32 set_val) -+{ -+ u32 reg_val; -+ -+ reg_val = readl(reg); -+ reg_val &= ~(clr_val); -+ reg_val |= set_val; -+ writel(reg_val, reg); -+} -+ -+static u32 sunxi_getbits(void __iomem *reg, u8 mask, u8 shift) -+{ -+ return (readl(reg) >> shift) & mask; -+} -+ -+static int ahci_sunxi_phy_init(struct device *dev, void __iomem *reg_base) -+{ -+ u32 reg_val; -+ int timeout; -+ -+ /* This magic is from the original code */ -+ writel(0, reg_base + AHCI_RWCR); -+ mdelay(5); -+ -+ sunxi_setbits(reg_base + AHCI_PHYCS1R, BIT(19)); -+ sunxi_clrsetbits(reg_base + AHCI_PHYCS0R, -+ (0x7 << 24), -+ (0x5 << 24) | BIT(23) | BIT(18)); -+ sunxi_clrsetbits(reg_base + AHCI_PHYCS1R, -+ (0x3 << 16) | (0x1f << 8) | (0x3 << 6), -+ (0x2 << 16) | (0x6 << 8) | (0x2 << 6)); -+ sunxi_setbits(reg_base + AHCI_PHYCS1R, BIT(28) | BIT(15)); -+ sunxi_clrbits(reg_base + AHCI_PHYCS1R, BIT(19)); -+ sunxi_clrsetbits(reg_base + AHCI_PHYCS0R, -+ (0x7 << 20), (0x3 << 20)); -+ sunxi_clrsetbits(reg_base + AHCI_PHYCS2R, -+ (0x1f << 5), (0x19 << 5)); -+ mdelay(5); -+ -+ sunxi_setbits(reg_base + AHCI_PHYCS0R, (0x1 << 19)); -+ -+ timeout = 250; /* Power up takes aprox 50 us */ -+ do { -+ reg_val = sunxi_getbits(reg_base + AHCI_PHYCS0R, 0x7, 28); -+ if (reg_val == 0x02) -+ break; -+ -+ if (--timeout == 0) { -+ dev_err(dev, "PHY power up failed.\n"); -+ return -EIO; -+ } -+ udelay(1); -+ } while (1); -+ -+ sunxi_setbits(reg_base + AHCI_PHYCS2R, (0x1 << 24)); -+ -+ timeout = 100; /* Calibration takes aprox 10 us */ -+ do { -+ reg_val = sunxi_getbits(reg_base + AHCI_PHYCS2R, 0x1, 24); -+ if (reg_val == 0x00) -+ break; -+ -+ if (--timeout == 0) { -+ dev_err(dev, "PHY calibration failed.\n"); -+ return -EIO; -+ } -+ udelay(1); -+ } while (1); -+ -+ mdelay(15); -+ -+ writel(0x7, reg_base + AHCI_RWCR); -+ -+ return 0; -+} -+ -+static void ahci_sunxi_start_engine(struct ata_port *ap) -+{ -+ void __iomem *port_mmio = ahci_port_base(ap); -+ struct ahci_host_priv *hpriv = ap->host->private_data; -+ -+ /* Setup DMA before DMA start */ -+ sunxi_clrsetbits(hpriv->mmio + AHCI_P0DMACR, 0x0000ff00, 0x00004400); -+ -+ /* Start DMA */ -+ sunxi_setbits(port_mmio + PORT_CMD, PORT_CMD_START); -+} -+ -+static const struct ata_port_info ahci_sunxi_port_info = { -+ AHCI_HFLAGS(AHCI_HFLAG_32BIT_ONLY | AHCI_HFLAG_NO_MSI | -+ AHCI_HFLAG_NO_PMP | AHCI_HFLAG_YES_NCQ), -+ .flags = AHCI_FLAG_COMMON | ATA_FLAG_NCQ, -+ .pio_mask = ATA_PIO4, -+ .udma_mask = ATA_UDMA6, -+ .port_ops = &ahci_platform_ops, -+}; -+ -+static int ahci_sunxi_probe(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct ahci_host_priv *hpriv; -+ int rc; -+ -+ hpriv = ahci_platform_get_resources(pdev); -+ if (IS_ERR(hpriv)) -+ return PTR_ERR(hpriv); -+ -+ hpriv->start_engine = ahci_sunxi_start_engine; -+ -+ rc = ahci_platform_enable_resources(hpriv); -+ if (rc) -+ return rc; -+ -+ rc = ahci_sunxi_phy_init(dev, hpriv->mmio); -+ if (rc) -+ goto disable_resources; -+ -+ rc = ahci_platform_init_host(pdev, hpriv, &ahci_sunxi_port_info, 0, 0); -+ if (rc) -+ goto disable_resources; -+ -+ return 0; -+ -+disable_resources: -+ ahci_platform_disable_resources(hpriv); -+ return rc; -+} -+ -+#ifdef CONFIG_PM_SLEEP -+int ahci_sunxi_resume(struct device *dev) -+{ -+ struct ata_host *host = dev_get_drvdata(dev); -+ struct ahci_host_priv *hpriv = host->private_data; -+ int rc; -+ -+ rc = ahci_platform_enable_resources(hpriv); -+ if (rc) -+ return rc; -+ -+ rc = ahci_sunxi_phy_init(dev, hpriv->mmio); -+ if (rc) -+ goto disable_resources; -+ -+ rc = ahci_platform_resume_host(dev); -+ if (rc) -+ goto disable_resources; -+ -+ return 0; -+ -+disable_resources: -+ ahci_platform_disable_resources(hpriv); -+ return rc; -+} -+#endif -+ -+static SIMPLE_DEV_PM_OPS(ahci_sunxi_pm_ops, ahci_platform_suspend, -+ ahci_sunxi_resume); -+ -+static const struct of_device_id ahci_sunxi_of_match[] = { -+ { .compatible = "allwinner,sun4i-a10-ahci", }, -+ { }, -+}; -+MODULE_DEVICE_TABLE(of, ahci_sunxi_of_match); -+ -+static struct platform_driver ahci_sunxi_driver = { -+ .probe = ahci_sunxi_probe, -+ .remove = ata_platform_remove_one, -+ .driver = { -+ .name = "ahci-sunxi", -+ .owner = THIS_MODULE, -+ .of_match_table = ahci_sunxi_of_match, -+ .pm = &ahci_sunxi_pm_ops, -+ }, -+}; -+module_platform_driver(ahci_sunxi_driver); -+ -+MODULE_DESCRIPTION("Allwinner sunxi AHCI SATA driver"); -+MODULE_AUTHOR("Olliver Schinagl "); -+MODULE_LICENSE("GPL"); --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/162-1-ahci-plat-add-dt-compat.patch b/target/linux/sunxi/patches-3.13/162-1-ahci-plat-add-dt-compat.patch deleted file mode 100644 index 3fea6ce527..0000000000 --- a/target/linux/sunxi/patches-3.13/162-1-ahci-plat-add-dt-compat.patch +++ /dev/null @@ -1,31 +0,0 @@ -From 90189e2c18e983da0ce22e44cd610f9ce2db69b1 Mon Sep 17 00:00:00 2001 -From: Roger Quadros -Date: Mon, 20 Jan 2014 16:32:33 +0200 -Subject: [PATCH] ata: ahci_platform: Add DT compatible for Synopsis DWC AHCI - controller - -Add compatible string "snps,dwc-ahci", which should be used -for Synopsis Designware SATA cores. e.g. on TI OMAP5 and DRA7 platforms. - -Signed-off-by: Roger Quadros -Reviewed-by: Bartlomiej Zolnierkiewicz -Signed-off-by: Hans de Goede ---- - drivers/ata/ahci_platform.c | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c -index bdadec1..d7e55ba 100644 ---- a/drivers/ata/ahci_platform.c -+++ b/drivers/ata/ahci_platform.c -@@ -609,6 +609,7 @@ static SIMPLE_DEV_PM_OPS(ahci_pm_ops, ahci_platform_suspend, - { .compatible = "snps,spear-ahci", }, - { .compatible = "snps,exynos5440-ahci", }, - { .compatible = "ibm,476gtr-ahci", }, -+ { .compatible = "snps,dwc-ahci", }, - {}, - }; - MODULE_DEVICE_TABLE(of, ahci_of_match); --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/162-2-ahci-plat-manage-sata-phy.patch b/target/linux/sunxi/patches-3.13/162-2-ahci-plat-manage-sata-phy.patch deleted file mode 100644 index 1ab704beda..0000000000 --- a/target/linux/sunxi/patches-3.13/162-2-ahci-plat-manage-sata-phy.patch +++ /dev/null @@ -1,142 +0,0 @@ -From 154a670a945c54300749d5ba008f30bbd6089017 Mon Sep 17 00:00:00 2001 -From: Roger Quadros -Date: Mon, 27 Jan 2014 16:41:18 +0200 -Subject: [PATCH] ata: ahci_platform: Manage SATA PHY - -Some platforms have a PHY hooked up to the -SATA controller. The PHY needs to be initialized -and powered up for SATA to work. We do that -using the PHY framework. - -CC: Balaji T K -Signed-off-by: Roger Quadros -Signed-off-by: Hans de Goede ---- - drivers/ata/ahci.h | 2 ++ - drivers/ata/ahci_platform.c | 47 +++++++++++++++++++++++++++++++++++++++++++-- - 2 files changed, 47 insertions(+), 2 deletions(-) - -diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h -index bf8100c..3ab7ac9 100644 ---- a/drivers/ata/ahci.h -+++ b/drivers/ata/ahci.h -@@ -37,6 +37,7 @@ - - #include - #include -+#include - #include - - /* Enclosure Management Control */ -@@ -325,6 +326,7 @@ struct ahci_host_priv { - u32 em_msg_type; /* EM message type */ - struct clk *clks[AHCI_MAX_CLKS]; /* Optional */ - struct regulator *target_pwr; /* Optional */ -+ struct phy *phy; /* If platform uses phy */ - void *plat_data; /* Other platform data */ - /* - * Optional ahci_start_engine override, if not set this gets set to the -diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c -index d7e55ba..99d38c1 100644 ---- a/drivers/ata/ahci_platform.c -+++ b/drivers/ata/ahci_platform.c -@@ -23,6 +23,7 @@ - #include - #include - #include -+#include - #include "ahci.h" - - static void ahci_host_stop(struct ata_host *host); -@@ -147,6 +148,7 @@ void ahci_platform_disable_clks(struct ahci_host_priv *hpriv) - * the following order: - * 1) Regulator - * 2) Clocks (through ahci_platform_enable_clks) -+ * 3) Phy - * - * If resource enabling fails at any point the previous enabled - * resources are disabled in reverse order. -@@ -171,8 +173,23 @@ int ahci_platform_enable_resources(struct ahci_host_priv *hpriv) - if (rc) - goto disable_regulator; - -+ if (hpriv->phy) { -+ rc = phy_init(hpriv->phy); -+ if (rc) -+ goto disable_clks; -+ -+ rc = phy_power_on(hpriv->phy); -+ if (rc) { -+ phy_exit(hpriv->phy); -+ goto disable_clks; -+ } -+ } -+ - return 0; - -+disable_clks: -+ ahci_platform_disable_clks(hpriv); -+ - disable_regulator: - if (hpriv->target_pwr) - regulator_disable(hpriv->target_pwr); -@@ -186,14 +203,20 @@ int ahci_platform_enable_resources(struct ahci_host_priv *hpriv) - * - * This function disables all ahci_platform managed resources in - * the following order: -- * 1) Clocks (through ahci_platform_disable_clks) -- * 2) Regulator -+ * 1) Phy -+ * 2) Clocks (through ahci_platform_disable_clks) -+ * 3) Regulator - * - * LOCKING: - * None. - */ - void ahci_platform_disable_resources(struct ahci_host_priv *hpriv) - { -+ if (hpriv->phy) { -+ phy_power_off(hpriv->phy); -+ phy_exit(hpriv->phy); -+ } -+ - ahci_platform_disable_clks(hpriv); - - if (hpriv->target_pwr) -@@ -222,6 +245,7 @@ static void ahci_platform_put_resources(struct device *dev, void *res) - * 2) regulator for controlling the targets power (optional) - * 3) 0 - AHCI_MAX_CLKS clocks, as specified in the devs devicetree node, - * or for non devicetree enabled platforms a single clock -+ * 4) phy (optional) - * - * LOCKING: - * None. -@@ -283,6 +307,25 @@ struct ahci_host_priv *ahci_platform_get_resources( - hpriv->clks[i] = clk; - } - -+ hpriv->phy = devm_phy_get(dev, "sata-phy"); -+ if (IS_ERR(hpriv->phy)) { -+ rc = PTR_ERR(hpriv->phy); -+ switch (rc) { -+ case -ENODEV: -+ case -ENOSYS: -+ /* continue normally */ -+ hpriv->phy = NULL; -+ break; -+ -+ case -EPROBE_DEFER: -+ goto err_out; -+ -+ default: -+ dev_err(dev, "couldn't get sata-phy\n"); -+ goto err_out; -+ } -+ } -+ - devres_remove_group(dev, NULL); - return hpriv; - --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/162-3-ahci-plat-runtime-resume.patch b/target/linux/sunxi/patches-3.13/162-3-ahci-plat-runtime-resume.patch deleted file mode 100644 index 18953d1046..0000000000 --- a/target/linux/sunxi/patches-3.13/162-3-ahci-plat-runtime-resume.patch +++ /dev/null @@ -1,85 +0,0 @@ -From 48379fed3987d587a25a48e155872e9d3125490d Mon Sep 17 00:00:00 2001 -From: Roger Quadros -Date: Wed, 9 Oct 2013 15:08:59 +0300 -Subject: [PATCH] ata: ahci_platform: runtime resume the device before use - -On OMAP platforms the device needs to be runtime resumed before -it can be accessed. The OMAP HWMOD framework takes care of -enabling the module and its resources based on the -device's runtime PM state. - -In this patch we runtime resume during .probe() and runtime suspend -after .remove(). - -We also update the runtime PM state during .resume(). - -CC: Balaji T K -Signed-off-by: Roger Quadros -Signed-off-by: Hans de Goede ---- - drivers/ata/ahci.h | 1 + - drivers/ata/ahci_platform.c | 15 +++++++++++++++ - 2 files changed, 16 insertions(+) - -diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h -index 3ab7ac9..51af275b 100644 ---- a/drivers/ata/ahci.h -+++ b/drivers/ata/ahci.h -@@ -324,6 +324,7 @@ struct ahci_host_priv { - u32 em_loc; /* enclosure management location */ - u32 em_buf_sz; /* EM buffer size in byte */ - u32 em_msg_type; /* EM message type */ -+ bool got_runtime_pm; /* Did we do pm_runtime_get? */ - struct clk *clks[AHCI_MAX_CLKS]; /* Optional */ - struct regulator *target_pwr; /* Optional */ - struct phy *phy; /* If platform uses phy */ -diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c -index 99d38c1..75698a4 100644 ---- a/drivers/ata/ahci_platform.c -+++ b/drivers/ata/ahci_platform.c -@@ -24,6 +24,7 @@ - #include - #include - #include -+#include - #include "ahci.h" - - static void ahci_host_stop(struct ata_host *host); -@@ -229,6 +230,11 @@ static void ahci_platform_put_resources(struct device *dev, void *res) - struct ahci_host_priv *hpriv = res; - int c; - -+ if (hpriv->got_runtime_pm) { -+ pm_runtime_put_sync(dev); -+ pm_runtime_disable(dev); -+ } -+ - for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++) - clk_put(hpriv->clks[c]); - } -@@ -326,6 +332,10 @@ struct ahci_host_priv *ahci_platform_get_resources( - } - } - -+ pm_runtime_enable(dev); -+ pm_runtime_get_sync(dev); -+ hpriv->got_runtime_pm = true; -+ - devres_remove_group(dev, NULL); - return hpriv; - -@@ -635,6 +645,11 @@ int ahci_platform_resume(struct device *dev) - if (rc) - goto disable_resources; - -+ /* We resumed so update PM runtime state */ -+ pm_runtime_disable(dev); -+ pm_runtime_set_active(dev); -+ pm_runtime_enable(dev); -+ - return 0; - - disable_resources: --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/163-ahci_sunxi-use-mdelay.patch b/target/linux/sunxi/patches-3.13/163-ahci_sunxi-use-mdelay.patch deleted file mode 100644 index 4be6c15706..0000000000 --- a/target/linux/sunxi/patches-3.13/163-ahci_sunxi-use-mdelay.patch +++ /dev/null @@ -1,47 +0,0 @@ -From 09de09bc2c236dccb0ed5ed38015e829550a5c28 Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Sun, 23 Feb 2014 11:37:17 +0100 -Subject: [PATCH] ahci_sunxi: Use msleep instead of mdelay - -ahci_sunxi_phy_init is called from the probe and resume code paths, and -sleeping is safe in both, so use msleep instead of mdelay. - -Signed-off-by: Hans de Goede ---- - drivers/ata/ahci_sunxi.c | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - -diff --git a/drivers/ata/ahci_sunxi.c b/drivers/ata/ahci_sunxi.c -index 001f7dfc..d1bf3f7 100644 ---- a/drivers/ata/ahci_sunxi.c -+++ b/drivers/ata/ahci_sunxi.c -@@ -90,7 +90,7 @@ static int ahci_sunxi_phy_init(struct device *dev, void __iomem *reg_base) - - /* This magic is from the original code */ - writel(0, reg_base + AHCI_RWCR); -- mdelay(5); -+ msleep(5); - - sunxi_setbits(reg_base + AHCI_PHYCS1R, BIT(19)); - sunxi_clrsetbits(reg_base + AHCI_PHYCS0R, -@@ -105,7 +105,7 @@ static int ahci_sunxi_phy_init(struct device *dev, void __iomem *reg_base) - (0x7 << 20), (0x3 << 20)); - sunxi_clrsetbits(reg_base + AHCI_PHYCS2R, - (0x1f << 5), (0x19 << 5)); -- mdelay(5); -+ msleep(5); - - sunxi_setbits(reg_base + AHCI_PHYCS0R, (0x1 << 19)); - -@@ -137,7 +137,7 @@ static int ahci_sunxi_phy_init(struct device *dev, void __iomem *reg_base) - udelay(1); - } while (1); - -- mdelay(15); -+ msleep(15); - - writel(0x7, reg_base + AHCI_RWCR); - --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/164-1-dt-sun4i-add-ahci.patch b/target/linux/sunxi/patches-3.13/164-1-dt-sun4i-add-ahci.patch deleted file mode 100644 index 88063ed5f0..0000000000 --- a/target/linux/sunxi/patches-3.13/164-1-dt-sun4i-add-ahci.patch +++ /dev/null @@ -1,122 +0,0 @@ -From 3cae1df0e62432a80db86c80e261eb9bbed326ee Mon Sep 17 00:00:00 2001 -From: Oliver Schinagl -Date: Tue, 3 Dec 2013 12:10:11 +0100 -Subject: [PATCH] ARM: sun4i: dt: Add ahci / sata support - -This patch adds sunxi sata support to A10 boards that have such a connector. -Some boards also feature a regulator via a GPIO and support for this is also -added. - -Signed-off-by: Olliver Schinagl -Signed-off-by: Hans de Goede ---- - arch/arm/boot/dts/sun4i-a10-a1000.dts | 4 ++++ - arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 6 +++++ - arch/arm/boot/dts/sun4i-a10.dtsi | 8 +++++++ - arch/arm/boot/dts/sunxi-ahci-reg.dtsi | 36 ++++++++++++++++++++++++++++++ - 4 files changed, 54 insertions(+) - create mode 100644 arch/arm/boot/dts/sunxi-ahci-reg.dtsi - -diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts -index cbd2e13..d6ec839 100644 ---- a/arch/arm/boot/dts/sun4i-a10-a1000.dts -+++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts -@@ -35,6 +35,10 @@ - }; - }; - -+ ahci: sata@01c18000 { -+ status = "okay"; -+ }; -+ - pinctrl@01c20800 { - emac_power_pin_a1000: emac_power_pin@0 { - allwinner,pins = "PH15"; -diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts -index b139ee6..6df237d8 100644 ---- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts -+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts -@@ -12,6 +12,7 @@ - - /dts-v1/; - /include/ "sun4i-a10.dtsi" -+/include/ "sunxi-ahci-reg.dtsi" - - / { - model = "Cubietech Cubieboard"; -@@ -33,6 +34,11 @@ - }; - }; - -+ ahci: sata@01c18000 { -+ target-supply = <®_ahci_5v>; -+ status = "okay"; -+ }; -+ - pinctrl@01c20800 { - led_pins_cubieboard: led_pins@0 { - allwinner,pins = "PH20", "PH21"; -diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi -index 336dbec..454077a 100644 ---- a/arch/arm/boot/dts/sun4i-a10.dtsi -+++ b/arch/arm/boot/dts/sun4i-a10.dtsi -@@ -338,6 +338,14 @@ - #size-cells = <0>; - }; - -+ ahci: sata@01c18000 { -+ compatible = "allwinner,sun4i-a10-ahci"; -+ reg = <0x01c18000 0x1000>; -+ interrupts = <56>; -+ clocks = <&pll6 0>, <&ahb_gates 25>; -+ status = "disabled"; -+ }; -+ - intc: interrupt-controller@01c20400 { - compatible = "allwinner,sun4i-ic"; - reg = <0x01c20400 0x400>; -diff --git a/arch/arm/boot/dts/sunxi-ahci-reg.dtsi b/arch/arm/boot/dts/sunxi-ahci-reg.dtsi -new file mode 100644 -index 0000000..7072af1 ---- /dev/null -+++ b/arch/arm/boot/dts/sunxi-ahci-reg.dtsi -@@ -0,0 +1,36 @@ -+/* -+ * sunxi boards sata target power supply common code -+ * -+ * Copyright 2014 - Hans de Goede -+ * -+ * The code contained herein is licensed under the GNU General Public -+ * License. You may obtain a copy of the GNU General Public License -+ * Version 2 or later at the following locations: -+ * -+ * http://www.opensource.org/licenses/gpl-license.html -+ * http://www.gnu.org/copyleft/gpl.html -+ */ -+ -+/ { -+ soc@01c00000 { -+ pio: pinctrl@01c20800 { -+ ahci_pwr_pin_a: ahci_pwr_pin@0 { -+ allwinner,pins = "PB8"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ }; -+ }; -+ -+ reg_ahci_5v: ahci-5v { -+ compatible = "regulator-fixed"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&ahci_pwr_pin_a>; -+ regulator-name = "ahci-5v"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ enable-active-high; -+ gpio = <&pio 1 8 0>; -+ }; -+}; --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/164-2-dt-sun7i-add-ahci.patch b/target/linux/sunxi/patches-3.13/164-2-dt-sun7i-add-ahci.patch deleted file mode 100644 index 5a31f926c3..0000000000 --- a/target/linux/sunxi/patches-3.13/164-2-dt-sun7i-add-ahci.patch +++ /dev/null @@ -1,128 +0,0 @@ -From c7b99b7afc3882c1b38a15da8d1625dd448c6fee Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Fri, 3 Jan 2014 10:27:51 +0100 -Subject: [PATCH] ARM: sun7i: dt: Add ahci / sata support - -This patch adds sunxi sata support to A20 boards that have such a connector. -Some boards also feature a regulator via a GPIO and support for this is also -added. - -Signed-off-by: Olliver Schinagl -Signed-off-by: Hans de Goede ---- - arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 6 ++++++ - arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 18 ++++++++++++++++++ - arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 6 ++++++ - arch/arm/boot/dts/sun7i-a20.dtsi | 8 ++++++++ - 4 files changed, 38 insertions(+) - -diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts -index 7bf4935..07823c2 100644 ---- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts -+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts -@@ -13,12 +13,18 @@ - - /dts-v1/; - /include/ "sun7i-a20.dtsi" -+/include/ "sunxi-ahci-reg.dtsi" - - / { - model = "Cubietech Cubieboard2"; - compatible = "cubietech,cubieboard2", "allwinner,sun7i-a20"; - - soc@01c00000 { -+ ahci: sata@01c18000 { -+ target-supply = <®_ahci_5v>; -+ status = "okay"; -+ }; -+ - pinctrl@01c20800 { - led_pins_cubieboard2: led_pins@0 { - allwinner,pins = "PH20", "PH21"; -diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts -index 025ce52..403bd2e 100644 ---- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts -+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts -@@ -13,13 +13,26 @@ - - /dts-v1/; - /include/ "sun7i-a20.dtsi" -+/include/ "sunxi-ahci-reg.dtsi" - - / { - model = "Cubietech Cubietruck"; - compatible = "cubietech,cubietruck", "allwinner,sun7i-a20"; - - soc@01c00000 { -+ ahci: sata@01c18000 { -+ target-supply = <®_ahci_5v>; -+ status = "okay"; -+ }; -+ - pinctrl@01c20800 { -+ ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 { -+ allwinner,pins = "PH12"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ - led_pins_cubietruck: led_pins@0 { - allwinner,pins = "PH7", "PH11", "PH20", "PH21"; - allwinner,function = "gpio_out"; -@@ -90,4 +103,10 @@ - gpios = <&pio 7 7 0>; - }; - }; -+ -+ reg_ahci_5v: ahci-5v { -+ pinctrl-0 = <&ahci_pwr_pin_cubietruck>; -+ gpio = <&pio 7 12 0>; -+ status = "okay"; -+ }; - }; -diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts -index b02a796..d5c6799 100644 ---- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts -+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts -@@ -13,12 +13,18 @@ - - /dts-v1/; - /include/ "sun7i-a20.dtsi" -+/include/ "sunxi-ahci-reg.dtsi" - - / { - model = "Olimex A20-Olinuxino Micro"; - compatible = "olimex,a20-olinuxino-micro", "allwinner,sun7i-a20"; - - soc@01c00000 { -+ ahci: sata@01c18000 { -+ target-supply = <®_ahci_5v>; -+ status = "okay"; -+ }; -+ - pinctrl@01c20800 { - led_pins_olinuxino: led_pins@0 { - allwinner,pins = "PH2"; -diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi -index daaafd0..3385994 100644 ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -392,6 +392,14 @@ - #size-cells = <0>; - }; - -+ ahci: sata@01c18000 { -+ compatible = "allwinner,sun4i-a10-ahci"; -+ reg = <0x01c18000 0x1000>; -+ interrupts = <0 56 4>; -+ clocks = <&pll6 0>, <&ahb_gates 25>; -+ status = "disabled"; -+ }; -+ - pio: pinctrl@01c20800 { - compatible = "allwinner,sun7i-a20-pinctrl"; - reg = <0x01c20800 0x400>; --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/170-1-mmc-add-driver.patch b/target/linux/sunxi/patches-3.13/170-1-mmc-add-driver.patch deleted file mode 100644 index 99bb3439cf..0000000000 --- a/target/linux/sunxi/patches-3.13/170-1-mmc-add-driver.patch +++ /dev/null @@ -1,1187 +0,0 @@ -From 00f082cbfe43bd45ddcff3572875ee9fbeafdfdd Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?David=20Lanzend=C3=B6rfer?= -Date: Sat, 15 Feb 2014 16:37:33 +0100 -Subject: [PATCH] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner - sunxi SoCs -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This is based on the driver Allwinner ships in their Android kernel sources. - -Initial porting to upstream kernels done by David Lanzendörfer, additional -fixes and cleanups by Hans de Goede. - -It uses dma in bus-master mode using a built-in designware idmac controller, -which is identical to the one found in the mmc-dw hosts. -The rest of the host is not identical to mmc-dw. - -Signed-off-by: David Lanzendörfer -Signed-off-by: Hans de Goede ---- - drivers/mmc/host/Kconfig | 7 + - drivers/mmc/host/Makefile | 2 + - drivers/mmc/host/sunxi-mmc.c | 876 +++++++++++++++++++++++++++++++++++++++++++ - drivers/mmc/host/sunxi-mmc.h | 239 ++++++++++++ - 4 files changed, 1124 insertions(+) - create mode 100644 drivers/mmc/host/sunxi-mmc.c - create mode 100644 drivers/mmc/host/sunxi-mmc.h - -diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig -index 1384f67..7caf266 100644 ---- a/drivers/mmc/host/Kconfig -+++ b/drivers/mmc/host/Kconfig -@@ -689,3 +689,10 @@ config MMC_REALTEK_PCI - help - Say Y here to include driver code to support SD/MMC card interface - of Realtek PCI-E card reader -+ -+config MMC_SUNXI -+ tristate "Allwinner sunxi SD/MMC Host Controller support" -+ depends on ARCH_SUNXI -+ help -+ This selects support for the SD/MMC Host Controller on -+ Allwinner sunxi SoCs. -diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile -index 3483b6b..f3c7c243 100644 ---- a/drivers/mmc/host/Makefile -+++ b/drivers/mmc/host/Makefile -@@ -54,6 +54,8 @@ obj-$(CONFIG_MMC_WMT) += wmt-sdmmc.o - - obj-$(CONFIG_MMC_REALTEK_PCI) += rtsx_pci_sdmmc.o - -+obj-$(CONFIG_MMC_SUNXI) += sunxi-mmc.o -+ - obj-$(CONFIG_MMC_SDHCI_PLTFM) += sdhci-pltfm.o - obj-$(CONFIG_MMC_SDHCI_CNS3XXX) += sdhci-cns3xxx.o - obj-$(CONFIG_MMC_SDHCI_ESDHC_IMX) += sdhci-esdhc-imx.o -diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c -new file mode 100644 -index 0000000..2dc446c ---- /dev/null -+++ b/drivers/mmc/host/sunxi-mmc.c -@@ -0,0 +1,876 @@ -+/* -+ * Driver for sunxi SD/MMC host controllers -+ * (C) Copyright 2014-2015 Reuuimlla Technology Co., Ltd. -+ * (C) Copyright 2014-2015 Aaron Maoye -+ * (C) Copyright 2014-2015 O2S GmbH -+ * (C) Copyright 2014-2015 David Lanzendörfer -+ * (C) Copyright 2014-2015 Hans de Goede -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "sunxi-mmc.h" -+ -+static int sunxi_mmc_init_host(struct mmc_host *mmc) -+{ -+ u32 rval; -+ struct sunxi_mmc_host *smc_host = mmc_priv(mmc); -+ int ret; -+ -+ ret = clk_prepare_enable(smc_host->clk_ahb); -+ if (ret) { -+ dev_err(mmc_dev(smc_host->mmc), "AHB clk err %d\n", ret); -+ return ret; -+ } -+ ret = clk_prepare_enable(smc_host->clk_mod); -+ if (ret) { -+ dev_err(mmc_dev(smc_host->mmc), "MOD clk err %d\n", ret); -+ clk_disable_unprepare(smc_host->clk_ahb); -+ return ret; -+ } -+ -+ /* reset controller */ -+ rval = mci_readl(smc_host, REG_GCTRL) | SDXC_HARDWARE_RESET; -+ mci_writel(smc_host, REG_GCTRL, rval); -+ -+ mci_writel(smc_host, REG_FTRGL, 0x20070008); -+ mci_writel(smc_host, REG_TMOUT, 0xffffffff); -+ mci_writel(smc_host, REG_IMASK, smc_host->sdio_imask); -+ mci_writel(smc_host, REG_RINTR, 0xffffffff); -+ mci_writel(smc_host, REG_DBGC, 0xdeb); -+ mci_writel(smc_host, REG_FUNS, 0xceaa0000); -+ mci_writel(smc_host, REG_DLBA, smc_host->sg_dma); -+ rval = mci_readl(smc_host, REG_GCTRL)|SDXC_INTERRUPT_ENABLE_BIT; -+ rval &= ~SDXC_ACCESS_DONE_DIRECT; -+ mci_writel(smc_host, REG_GCTRL, rval); -+ -+ return 0; -+} -+ -+static void sunxi_mmc_exit_host(struct sunxi_mmc_host *smc_host) -+{ -+ mci_writel(smc_host, REG_GCTRL, SDXC_HARDWARE_RESET); -+ clk_disable_unprepare(smc_host->clk_ahb); -+ clk_disable_unprepare(smc_host->clk_mod); -+} -+ -+/* /\* UHS-I Operation Modes */ -+/* * DS 25MHz 12.5MB/s 3.3V */ -+/* * HS 50MHz 25MB/s 3.3V */ -+/* * SDR12 25MHz 12.5MB/s 1.8V */ -+/* * SDR25 50MHz 25MB/s 1.8V */ -+/* * SDR50 100MHz 50MB/s 1.8V */ -+/* * SDR104 208MHz 104MB/s 1.8V */ -+/* * DDR50 50MHz 50MB/s 1.8V */ -+/* * MMC Operation Modes */ -+/* * DS 26MHz 26MB/s 3/1.8/1.2V */ -+/* * HS 52MHz 52MB/s 3/1.8/1.2V */ -+/* * HSDDR 52MHz 104MB/s 3/1.8/1.2V */ -+/* * HS200 200MHz 200MB/s 1.8/1.2V */ -+/* * */ -+/* * Spec. Timing */ -+/* * SD3.0 */ -+/* * Fcclk Tcclk Fsclk Tsclk Tis Tih odly RTis RTih */ -+/* * 400K 2.5us 24M 41ns 5ns 5ns 1 2209ns 41ns */ -+/* * 25M 40ns 600M 1.67ns 5ns 5ns 3 14.99ns 5.01ns */ -+/* * 50M 20ns 600M 1.67ns 6ns 2ns 3 14.99ns 5.01ns */ -+/* * 50MDDR 20ns 600M 1.67ns 6ns 0.8ns 2 6.67ns 3.33ns */ -+/* * 104M 9.6ns 600M 1.67ns 3ns 0.8ns 1 7.93ns 1.67ns */ -+/* * 208M 4.8ns 600M 1.67ns 1.4ns 0.8ns 1 3.33ns 1.67ns */ -+ -+/* * 25M 40ns 300M 3.33ns 5ns 5ns 2 13.34ns 6.66ns */ -+/* * 50M 20ns 300M 3.33ns 6ns 2ns 2 13.34ns 6.66ns */ -+/* * 50MDDR 20ns 300M 3.33ns 6ns 0.8ns 1 6.67ns 3.33ns */ -+/* * 104M 9.6ns 300M 3.33ns 3ns 0.8ns 0 7.93ns 1.67ns */ -+/* * 208M 4.8ns 300M 3.33ns 1.4ns 0.8ns 0 3.13ns 1.67ns */ -+ -+/* * eMMC4.5 */ -+/* * 400K 2.5us 24M 41ns 3ns 3ns 1 2209ns 41ns */ -+/* * 25M 40ns 600M 1.67ns 3ns 3ns 3 14.99ns 5.01ns */ -+/* * 50M 20ns 600M 1.67ns 3ns 3ns 3 14.99ns 5.01ns */ -+/* * 50MDDR 20ns 600M 1.67ns 2.5ns 2.5ns 2 6.67ns 3.33ns */ -+/* * 200M 5ns 600M 1.67ns 1.4ns 0.8ns 1 3.33ns 1.67ns */ -+/* *\/ */ -+ -+static void sunxi_mmc_init_idma_des(struct sunxi_mmc_host *host, -+ struct mmc_data *data) -+{ -+ struct sunxi_idma_des *pdes = (struct sunxi_idma_des *)host->sg_cpu; -+ struct sunxi_idma_des *pdes_pa = (struct sunxi_idma_des *)host->sg_dma; -+ int i, max_len = (1 << host->idma_des_size_bits); -+ -+ for (i = 0; i < data->sg_len; i++) { -+ pdes[i].config = SDXC_IDMAC_DES0_CH | SDXC_IDMAC_DES0_OWN | -+ SDXC_IDMAC_DES0_DIC; -+ -+ if (data->sg[i].length == max_len) -+ pdes[i].buf_size = 0; /* 0 == max_len */ -+ else -+ pdes[i].buf_size = data->sg[i].length; -+ -+ pdes[i].buf_addr_ptr1 = sg_dma_address(&data->sg[i]); -+ pdes[i].buf_addr_ptr2 = (u32)&pdes_pa[i + 1]; -+ } -+ -+ pdes[0].config |= SDXC_IDMAC_DES0_FD; -+ pdes[i - 1].config = SDXC_IDMAC_DES0_OWN | SDXC_IDMAC_DES0_LD; -+ -+ wmb(); /* Ensure idma_des hit main mem before we start the idmac */ -+} -+ -+static enum dma_data_direction sunxi_mmc_get_dma_dir(struct mmc_data *data) -+{ -+ if (data->flags & MMC_DATA_WRITE) -+ return DMA_TO_DEVICE; -+ else -+ return DMA_FROM_DEVICE; -+} -+ -+static int sunxi_mmc_prepare_dma(struct sunxi_mmc_host *smc_host, -+ struct mmc_data *data) -+{ -+ u32 dma_len; -+ u32 i; -+ u32 temp; -+ struct scatterlist *sg; -+ -+ dma_len = dma_map_sg(mmc_dev(smc_host->mmc), data->sg, data->sg_len, -+ sunxi_mmc_get_dma_dir(data)); -+ if (dma_len == 0) { -+ dev_err(mmc_dev(smc_host->mmc), "dma_map_sg failed\n"); -+ return -ENOMEM; -+ } -+ -+ for_each_sg(data->sg, sg, data->sg_len, i) { -+ if (sg->offset & 3 || sg->length & 3) { -+ dev_err(mmc_dev(smc_host->mmc), -+ "unaligned scatterlist: os %x length %d\n", -+ sg->offset, sg->length); -+ return -EINVAL; -+ } -+ } -+ -+ sunxi_mmc_init_idma_des(smc_host, data); -+ -+ temp = mci_readl(smc_host, REG_GCTRL); -+ temp |= SDXC_DMA_ENABLE_BIT; -+ mci_writel(smc_host, REG_GCTRL, temp); -+ temp |= SDXC_DMA_RESET; -+ mci_writel(smc_host, REG_GCTRL, temp); -+ mci_writel(smc_host, REG_DMAC, SDXC_IDMAC_SOFT_RESET); -+ -+ if (!(data->flags & MMC_DATA_WRITE)) -+ mci_writel(smc_host, REG_IDIE, SDXC_IDMAC_RECEIVE_INTERRUPT); -+ -+ mci_writel(smc_host, REG_DMAC, SDXC_IDMAC_FIX_BURST | SDXC_IDMAC_IDMA_ON); -+ -+ return 0; -+} -+ -+static void sunxi_mmc_send_manual_stop(struct sunxi_mmc_host *host, -+ struct mmc_request *req) -+{ -+ u32 cmd_val = SDXC_START | SDXC_RESPONSE_EXPIRE | SDXC_STOP_ABORT_CMD -+ | SDXC_CHECK_RESPONSE_CRC | MMC_STOP_TRANSMISSION; -+ u32 ri = 0; -+ unsigned long expire = jiffies + msecs_to_jiffies(1000); -+ -+ mci_writel(host, REG_CARG, 0); -+ mci_writel(host, REG_CMDR, cmd_val); -+ -+ do { -+ ri = mci_readl(host, REG_RINTR); -+ } while (!(ri & (SDXC_COMMAND_DONE | SDXC_INTERRUPT_ERROR_BIT)) && -+ time_before(jiffies, expire)); -+ -+ if (ri & SDXC_INTERRUPT_ERROR_BIT) { -+ dev_err(mmc_dev(host->mmc), "send stop command failed\n"); -+ if (req->stop) -+ req->stop->resp[0] = -ETIMEDOUT; -+ } else { -+ if (req->stop) -+ req->stop->resp[0] = mci_readl(host, REG_RESP0); -+ } -+ -+ mci_writel(host, REG_RINTR, 0xffff); -+} -+ -+static void sunxi_mmc_dump_errinfo(struct sunxi_mmc_host *smc_host) -+{ -+ struct mmc_command *cmd = smc_host->mrq->cmd; -+ struct mmc_data *data = smc_host->mrq->data; -+ -+ /* For some cmds timeout is normal with sd/mmc cards */ -+ if ((smc_host->int_sum & SDXC_INTERRUPT_ERROR_BIT) == SDXC_RESPONSE_TIMEOUT && -+ (cmd->opcode == SD_IO_SEND_OP_COND || cmd->opcode == SD_IO_RW_DIRECT)) -+ return; -+ -+ dev_err(mmc_dev(smc_host->mmc), -+ "smc %d err, cmd %d,%s%s%s%s%s%s%s%s%s%s !!\n", -+ smc_host->mmc->index, cmd->opcode, -+ data ? (data->flags & MMC_DATA_WRITE ? " WR" : " RD") : "", -+ smc_host->int_sum & SDXC_RESPONSE_ERROR ? " RE" : "", -+ smc_host->int_sum & SDXC_RESPONSE_CRC_ERROR ? " RCE" : "", -+ smc_host->int_sum & SDXC_DATA_CRC_ERROR ? " DCE" : "", -+ smc_host->int_sum & SDXC_RESPONSE_TIMEOUT ? " RTO" : "", -+ smc_host->int_sum & SDXC_DATA_TIMEOUT ? " DTO" : "", -+ smc_host->int_sum & SDXC_FIFO_RUN_ERROR ? " FE" : "", -+ smc_host->int_sum & SDXC_HARD_WARE_LOCKED ? " HL" : "", -+ smc_host->int_sum & SDXC_START_BIT_ERROR ? " SBE" : "", -+ smc_host->int_sum & SDXC_END_BIT_ERROR ? " EBE" : "" -+ ); -+} -+ -+static void sunxi_mmc_finalize_request(struct sunxi_mmc_host *host) -+{ -+ struct mmc_request *mrq; -+ unsigned long iflags; -+ -+ spin_lock_irqsave(&host->lock, iflags); -+ -+ mrq = host->mrq; -+ if (!mrq) { -+ spin_unlock_irqrestore(&host->lock, iflags); -+ dev_err(mmc_dev(host->mmc), "no request to finalize\n"); -+ return; -+ } -+ -+ if (host->int_sum & SDXC_INTERRUPT_ERROR_BIT) { -+ sunxi_mmc_dump_errinfo(host); -+ mrq->cmd->error = -ETIMEDOUT; -+ if (mrq->data) -+ mrq->data->error = -ETIMEDOUT; -+ if (mrq->stop) -+ mrq->stop->error = -ETIMEDOUT; -+ } else { -+ if (mrq->cmd->flags & MMC_RSP_136) { -+ mrq->cmd->resp[0] = mci_readl(host, REG_RESP3); -+ mrq->cmd->resp[1] = mci_readl(host, REG_RESP2); -+ mrq->cmd->resp[2] = mci_readl(host, REG_RESP1); -+ mrq->cmd->resp[3] = mci_readl(host, REG_RESP0); -+ } else { -+ mrq->cmd->resp[0] = mci_readl(host, REG_RESP0); -+ } -+ if (mrq->data) -+ mrq->data->bytes_xfered = -+ mrq->data->blocks * mrq->data->blksz; -+ } -+ -+ if (mrq->data) { -+ struct mmc_data *data = mrq->data; -+ u32 temp; -+ -+ mci_writel(host, REG_IDST, 0x337); -+ mci_writel(host, REG_DMAC, 0); -+ temp = mci_readl(host, REG_GCTRL); -+ mci_writel(host, REG_GCTRL, temp|SDXC_DMA_RESET); -+ temp &= ~SDXC_DMA_ENABLE_BIT; -+ mci_writel(host, REG_GCTRL, temp); -+ temp |= SDXC_FIFO_RESET; -+ mci_writel(host, REG_GCTRL, temp); -+ dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len, -+ sunxi_mmc_get_dma_dir(data)); -+ } -+ -+ mci_writel(host, REG_RINTR, 0xffff); -+ -+ dev_dbg(mmc_dev(host->mmc), "req done, resp %08x %08x %08x %08x\n", -+ mrq->cmd->resp[0], mrq->cmd->resp[1], -+ mrq->cmd->resp[2], mrq->cmd->resp[3]); -+ -+ host->mrq = NULL; -+ host->int_sum = 0; -+ host->wait_dma = 0; -+ -+ spin_unlock_irqrestore(&host->lock, iflags); -+ -+ if (mrq->data && mrq->data->error) { -+ dev_err(mmc_dev(host->mmc), -+ "data error, sending stop command\n"); -+ sunxi_mmc_send_manual_stop(host, mrq); -+ } -+ -+ mmc_request_done(host->mmc, mrq); -+} -+ -+static irqreturn_t sunxi_mmc_irq(int irq, void *dev_id) -+{ -+ struct sunxi_mmc_host *host = dev_id; -+ u32 finalize = 0; -+ u32 sdio_int = 0; -+ u32 msk_int; -+ u32 idma_int; -+ -+ spin_lock(&host->lock); -+ -+ idma_int = mci_readl(host, REG_IDST); -+ msk_int = mci_readl(host, REG_MISTA); -+ -+ dev_dbg(mmc_dev(host->mmc), "irq: rq %p mi %08x idi %08x\n", -+ host->mrq, msk_int, idma_int); -+ -+ if (host->mrq) { -+ if (idma_int & SDXC_IDMAC_RECEIVE_INTERRUPT) -+ host->wait_dma = 0; -+ -+ host->int_sum |= msk_int; -+ -+ /* Wait for COMMAND_DONE on RESPONSE_TIMEOUT before finishing the req */ -+ if ((host->int_sum & SDXC_RESPONSE_TIMEOUT) && -+ !(host->int_sum & SDXC_COMMAND_DONE)) -+ mci_writel(host, REG_IMASK, -+ host->sdio_imask | SDXC_COMMAND_DONE); -+ else if (host->int_sum & SDXC_INTERRUPT_ERROR_BIT) -+ finalize = 1; /* Don't wait for dma on error */ -+ else if (host->int_sum & SDXC_INTERRUPT_DONE_BIT && !host->wait_dma) -+ finalize = 1; /* Done */ -+ -+ if (finalize) { -+ mci_writel(host, REG_IMASK, host->sdio_imask); -+ mci_writel(host, REG_IDIE, 0); -+ } -+ } -+ -+ if (msk_int & SDXC_SDIO_INTERRUPT) -+ sdio_int = 1; -+ -+ mci_writel(host, REG_RINTR, msk_int); -+ mci_writel(host, REG_IDST, idma_int); -+ -+ spin_unlock(&host->lock); -+ -+ if (finalize) -+ tasklet_schedule(&host->tasklet); -+ -+ if (sdio_int) -+ mmc_signal_sdio_irq(host->mmc); -+ -+ return IRQ_HANDLED; -+} -+ -+static void sunxi_mmc_tasklet(unsigned long data) -+{ -+ struct sunxi_mmc_host *smc_host = (struct sunxi_mmc_host *) data; -+ sunxi_mmc_finalize_request(smc_host); -+} -+ -+static void sunxi_mmc_oclk_onoff(struct sunxi_mmc_host *host, u32 oclk_en) -+{ -+ unsigned long expire = jiffies + msecs_to_jiffies(2000); -+ u32 rval; -+ -+ rval = mci_readl(host, REG_CLKCR); -+ rval &= ~(SDXC_CARD_CLOCK_ON | SDXC_LOW_POWER_ON); -+ -+ if (oclk_en) -+ rval |= SDXC_CARD_CLOCK_ON; -+ -+ if (!host->io_flag) -+ rval |= SDXC_LOW_POWER_ON; -+ -+ mci_writel(host, REG_CLKCR, rval); -+ -+ rval = SDXC_START | SDXC_UPCLK_ONLY | SDXC_WAIT_PRE_OVER; -+ if (host->voltage_switching) -+ rval |= SDXC_VOLTAGE_SWITCH; -+ mci_writel(host, REG_CMDR, rval); -+ -+ do { -+ rval = mci_readl(host, REG_CMDR); -+ } while (time_before(jiffies, expire) && (rval & SDXC_START)); -+ -+ if (rval & SDXC_START) { -+ dev_err(mmc_dev(host->mmc), "fatal err update clk timeout\n"); -+ host->ferror = 1; -+ } -+} -+ -+static void sunxi_mmc_set_clk_dly(struct sunxi_mmc_host *smc_host, -+ u32 oclk_dly, u32 sclk_dly) -+{ -+ unsigned long iflags; -+ struct clk_hw *hw = __clk_get_hw(smc_host->clk_mod); -+ -+ spin_lock_irqsave(&smc_host->lock, iflags); -+ clk_sunxi_mmc_phase_control(hw, sclk_dly, oclk_dly); -+ spin_unlock_irqrestore(&smc_host->lock, iflags); -+} -+ -+struct sunxi_mmc_clk_dly mmc_clk_dly[MMC_CLK_MOD_NUM] = { -+ { MMC_CLK_400K, 0, 7 }, -+ { MMC_CLK_25M, 0, 5 }, -+ { MMC_CLK_50M, 3, 5 }, -+ { MMC_CLK_50MDDR, 2, 4 }, -+ { MMC_CLK_50MDDR_8BIT, 2, 4 }, -+ { MMC_CLK_100M, 1, 4 }, -+ { MMC_CLK_200M, 1, 4 }, -+}; -+ -+static void sunxi_mmc_clk_set_rate(struct sunxi_mmc_host *smc_host, -+ unsigned int rate) -+{ -+ u32 newrate; -+ u32 src_clk; -+ u32 oclk_dly; -+ u32 sclk_dly; -+ u32 temp; -+ struct sunxi_mmc_clk_dly *dly = NULL; -+ -+ newrate = clk_round_rate(smc_host->clk_mod, rate); -+ if (smc_host->clk_mod_rate == newrate) { -+ dev_dbg(mmc_dev(smc_host->mmc), "clk already %d, rounded %d\n", -+ rate, newrate); -+ return; -+ } -+ -+ dev_dbg(mmc_dev(smc_host->mmc), "setting clk to %d, rounded %d\n", -+ rate, newrate); -+ -+ /* setting clock rate */ -+ clk_disable(smc_host->clk_mod); -+ clk_set_rate(smc_host->clk_mod, newrate); -+ clk_enable(smc_host->clk_mod); -+ smc_host->clk_mod_rate = newrate = clk_get_rate(smc_host->clk_mod); -+ dev_dbg(mmc_dev(smc_host->mmc), "clk is now %d\n", newrate); -+ -+ sunxi_mmc_oclk_onoff(smc_host, 0); -+ /* clear internal divider */ -+ temp = mci_readl(smc_host, REG_CLKCR); -+ temp &= ~0xff; -+ mci_writel(smc_host, REG_CLKCR, temp); -+ -+ /* determine delays */ -+ if (rate <= 400000) { -+ dly = &mmc_clk_dly[MMC_CLK_400K]; -+ } else if (rate <= 25000000) { -+ dly = &mmc_clk_dly[MMC_CLK_25M]; -+ } else if (rate <= 50000000) { -+ if (smc_host->ddr) { -+ if (smc_host->bus_width == 8) -+ dly = &mmc_clk_dly[MMC_CLK_50MDDR_8BIT]; -+ else -+ dly = &mmc_clk_dly[MMC_CLK_50MDDR]; -+ } else { -+ dly = &mmc_clk_dly[MMC_CLK_50M]; -+ } -+ } else if (rate <= 104000000) { -+ dly = &mmc_clk_dly[MMC_CLK_100M]; -+ } else if (rate <= 208000000) { -+ dly = &mmc_clk_dly[MMC_CLK_200M]; -+ } else { -+ dly = &mmc_clk_dly[MMC_CLK_50M]; -+ } -+ -+ oclk_dly = dly->oclk_dly; -+ sclk_dly = dly->sclk_dly; -+ -+ src_clk = clk_get_rate(clk_get_parent(smc_host->clk_mod)); -+ -+ if (src_clk >= 300000000 && src_clk <= 400000000) { -+ if (oclk_dly) -+ oclk_dly--; -+ if (sclk_dly) -+ sclk_dly--; -+ } -+ -+ sunxi_mmc_set_clk_dly(smc_host, oclk_dly, sclk_dly); -+ sunxi_mmc_oclk_onoff(smc_host, 1); -+ -+ /* oclk_onoff sets various irq status bits, clear these */ -+ mci_writel(smc_host, REG_RINTR, -+ mci_readl(smc_host, REG_RINTR) & ~SDXC_SDIO_INTERRUPT); -+} -+ -+static void sunxi_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) -+{ -+ struct sunxi_mmc_host *host = mmc_priv(mmc); -+ u32 temp; -+ s32 err; -+ -+ /* Set the power state */ -+ switch (ios->power_mode) { -+ case MMC_POWER_ON: -+ break; -+ -+ case MMC_POWER_UP: -+ if (!IS_ERR(host->vmmc)) { -+ mmc_regulator_set_ocr(host->mmc, host->vmmc, ios->vdd); -+ udelay(200); -+ } -+ -+ err = sunxi_mmc_init_host(mmc); -+ if (err) { -+ host->ferror = 1; -+ return; -+ } -+ enable_irq(host->irq); -+ -+ dev_dbg(mmc_dev(host->mmc), "power on!\n"); -+ host->ferror = 0; -+ break; -+ -+ case MMC_POWER_OFF: -+ dev_dbg(mmc_dev(host->mmc), "power off!\n"); -+ disable_irq(host->irq); -+ sunxi_mmc_exit_host(host); -+ if (!IS_ERR(host->vmmc)) -+ mmc_regulator_set_ocr(host->mmc, host->vmmc, 0); -+ host->ferror = 0; -+ break; -+ } -+ -+ /* set bus width */ -+ switch (ios->bus_width) { -+ case MMC_BUS_WIDTH_1: -+ mci_writel(host, REG_WIDTH, SDXC_WIDTH1); -+ host->bus_width = 1; -+ break; -+ case MMC_BUS_WIDTH_4: -+ mci_writel(host, REG_WIDTH, SDXC_WIDTH4); -+ host->bus_width = 4; -+ break; -+ case MMC_BUS_WIDTH_8: -+ mci_writel(host, REG_WIDTH, SDXC_WIDTH8); -+ host->bus_width = 8; -+ break; -+ } -+ -+ /* set ddr mode */ -+ temp = mci_readl(host, REG_GCTRL); -+ if (ios->timing == MMC_TIMING_UHS_DDR50) { -+ temp |= SDXC_DDR_MODE; -+ host->ddr = 1; -+ } else { -+ temp &= ~SDXC_DDR_MODE; -+ host->ddr = 0; -+ } -+ mci_writel(host, REG_GCTRL, temp); -+ -+ /* set up clock */ -+ if (ios->clock && ios->power_mode) { -+ dev_dbg(mmc_dev(host->mmc), "ios->clock: %d\n", ios->clock); -+ sunxi_mmc_clk_set_rate(host, ios->clock); -+ usleep_range(50000, 55000); -+ } -+} -+ -+static void sunxi_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable) -+{ -+ struct sunxi_mmc_host *smc_host = mmc_priv(mmc); -+ unsigned long flags; -+ int ret; -+ u32 imask; -+ -+ spin_lock_irqsave(&smc_host->lock, flags); -+ -+ /* Make sure the controller is in a sane state before enabling irqs */ -+ ret = sunxi_mmc_init_host(host->mmc); -+ if (ret) { -+ spin_unlock_irqrestore(&smc_host->lock, flags); -+ return ret; -+ } -+ -+ imask = mci_readl(smc_host, REG_IMASK); -+ if (enable) { -+ smc_host->sdio_imask = SDXC_SDIO_INTERRUPT; -+ imask |= SDXC_SDIO_INTERRUPT; -+ } else { -+ smc_host->sdio_imask = 0; -+ imask &= ~SDXC_SDIO_INTERRUPT; -+ } -+ mci_writel(smc_host, REG_IMASK, imask); -+ spin_unlock_irqrestore(&smc_host->lock, flags); -+} -+ -+static void sunxi_mmc_hw_reset(struct mmc_host *mmc) -+{ -+ struct sunxi_mmc_host *smc_host = mmc_priv(mmc); -+ mci_writel(smc_host, REG_HWRST, 0); -+ udelay(10); -+ mci_writel(smc_host, REG_HWRST, 1); -+ udelay(300); -+} -+ -+static void sunxi_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) -+{ -+ struct sunxi_mmc_host *host = mmc_priv(mmc); -+ struct mmc_command *cmd = mrq->cmd; -+ struct mmc_data *data = mrq->data; -+ unsigned long iflags; -+ u32 imask = SDXC_INTERRUPT_ERROR_BIT; -+ u32 cmd_val = SDXC_START | (cmd->opcode & 0x3f); -+ u32 byte_cnt = 0; -+ int ret; -+ -+ if (!mmc_gpio_get_cd(mmc) || host->ferror) { -+ dev_dbg(mmc_dev(host->mmc), "no medium present\n"); -+ mrq->cmd->error = -ENOMEDIUM; -+ mmc_request_done(mmc, mrq); -+ return; -+ } -+ -+ if (data) { -+ byte_cnt = data->blksz * data->blocks; -+ mci_writel(host, REG_BLKSZ, data->blksz); -+ mci_writel(host, REG_BCNTR, byte_cnt); -+ ret = sunxi_mmc_prepare_dma(host, data); -+ if (ret < 0) { -+ dev_err(mmc_dev(host->mmc), "prepare DMA failed\n"); -+ cmd->error = ret; -+ cmd->data->error = ret; -+ mmc_request_done(host->mmc, mrq); -+ return; -+ } -+ } -+ -+ if (cmd->opcode == MMC_GO_IDLE_STATE) { -+ cmd_val |= SDXC_SEND_INIT_SEQUENCE; -+ imask |= SDXC_COMMAND_DONE; -+ } -+ -+ if (cmd->opcode == SD_SWITCH_VOLTAGE) { -+ cmd_val |= SDXC_VOLTAGE_SWITCH; -+ imask |= SDXC_VOLTAGE_CHANGE_DONE; -+ host->voltage_switching = 1; -+ sunxi_mmc_oclk_onoff(host, 1); -+ } -+ -+ if (cmd->flags & MMC_RSP_PRESENT) { -+ cmd_val |= SDXC_RESPONSE_EXPIRE; -+ if (cmd->flags & MMC_RSP_136) -+ cmd_val |= SDXC_LONG_RESPONSE; -+ if (cmd->flags & MMC_RSP_CRC) -+ cmd_val |= SDXC_CHECK_RESPONSE_CRC; -+ -+ if ((cmd->flags & MMC_CMD_MASK) == MMC_CMD_ADTC) { -+ cmd_val |= SDXC_DATA_EXPIRE | SDXC_WAIT_PRE_OVER; -+ if (cmd->data->flags & MMC_DATA_STREAM) { -+ imask |= SDXC_AUTO_COMMAND_DONE; -+ cmd_val |= SDXC_SEQUENCE_MODE | SDXC_SEND_AUTO_STOP; -+ } -+ if (cmd->data->stop) { -+ imask |= SDXC_AUTO_COMMAND_DONE; -+ cmd_val |= SDXC_SEND_AUTO_STOP; -+ } else -+ imask |= SDXC_DATA_OVER; -+ -+ if (cmd->data->flags & MMC_DATA_WRITE) -+ cmd_val |= SDXC_WRITE; -+ else -+ host->wait_dma = 1; -+ } else -+ imask |= SDXC_COMMAND_DONE; -+ } else -+ imask |= SDXC_COMMAND_DONE; -+ -+ dev_dbg(mmc_dev(host->mmc), "cmd %d(%08x) arg %x ie 0x%08x len %d\n", -+ cmd_val & 0x3f, cmd_val, cmd->arg, imask, -+ mrq->data ? mrq->data->blksz * mrq->data->blocks : 0); -+ -+ spin_lock_irqsave(&host->lock, iflags); -+ host->mrq = mrq; -+ mci_writel(host, REG_IMASK, host->sdio_imask | imask); -+ spin_unlock_irqrestore(&host->lock, iflags); -+ -+ mci_writel(host, REG_CARG, cmd->arg); -+ mci_writel(host, REG_CMDR, cmd_val); -+} -+ -+static const struct of_device_id sunxi_mmc_of_match[] = { -+ { .compatible = "allwinner,sun4i-a10-mmc", }, -+ { .compatible = "allwinner,sun5i-a13-mmc", }, -+ { /* sentinel */ } -+}; -+MODULE_DEVICE_TABLE(of, sunxi_mmc_of_match); -+ -+static struct mmc_host_ops sunxi_mmc_ops = { -+ .request = sunxi_mmc_request, -+ .set_ios = sunxi_mmc_set_ios, -+ .get_ro = mmc_gpio_get_ro, -+ .get_cd = mmc_gpio_get_cd, -+ .enable_sdio_irq = sunxi_mmc_enable_sdio_irq, -+ .hw_reset = sunxi_mmc_hw_reset, -+}; -+ -+static int sunxi_mmc_resource_request(struct sunxi_mmc_host *host, -+ struct platform_device *pdev) -+{ -+ struct device_node *np = pdev->dev.of_node; -+ int ret; -+ -+ if (of_device_is_compatible(np, "allwinner,sun4i-a10-mmc")) -+ host->idma_des_size_bits = 13; -+ else -+ host->idma_des_size_bits = 16; -+ -+ host->vmmc = devm_regulator_get_optional(&pdev->dev, "vmmc"); -+ if (IS_ERR(host->vmmc) && PTR_ERR(host->vmmc) == -EPROBE_DEFER) -+ return -EPROBE_DEFER; -+ -+ host->reg_base = devm_ioremap_resource(&pdev->dev, -+ platform_get_resource(pdev, IORESOURCE_MEM, 0)); -+ if (IS_ERR(host->reg_base)) -+ return PTR_ERR(host->reg_base); -+ -+ host->clk_ahb = devm_clk_get(&pdev->dev, "ahb"); -+ if (IS_ERR(host->clk_ahb)) { -+ dev_err(&pdev->dev, "Could not get ahb clock\n"); -+ return PTR_ERR(host->clk_ahb); -+ } -+ -+ host->clk_mod = devm_clk_get(&pdev->dev, "mod"); -+ if (IS_ERR(host->clk_mod)) { -+ dev_err(&pdev->dev, "Could not get mod clock\n"); -+ return PTR_ERR(host->clk_mod); -+ } -+ -+ /* Make sure the controller is in a sane state before enabling irqs */ -+ ret = sunxi_mmc_init_host(host->mmc); -+ if (ret) -+ return ret; -+ -+ host->irq = platform_get_irq(pdev, 0); -+ ret = devm_request_irq(&pdev->dev, host->irq, sunxi_mmc_irq, 0, -+ "sunxi-mmc", host); -+ if (ret == 0) -+ disable_irq(host->irq); -+ -+ /* And put it back in reset */ -+ sunxi_mmc_exit_host(host); -+ -+ return ret; -+} -+ -+static int sunxi_mmc_probe(struct platform_device *pdev) -+{ -+ struct sunxi_mmc_host *host; -+ struct mmc_host *mmc; -+ int ret; -+ -+ mmc = mmc_alloc_host(sizeof(struct sunxi_mmc_host), &pdev->dev); -+ if (!mmc) { -+ dev_err(&pdev->dev, "mmc alloc host failed\n"); -+ return -ENOMEM; -+ } -+ -+ ret = mmc_of_parse(mmc); -+ if (ret) -+ goto error_free_host; -+ -+ host = mmc_priv(mmc); -+ host->mmc = mmc; -+ spin_lock_init(&host->lock); -+ tasklet_init(&host->tasklet, sunxi_mmc_tasklet, (unsigned long)host); -+ -+ ret = sunxi_mmc_resource_request(host, pdev); -+ if (ret) -+ goto error_free_host; -+ -+ host->sg_cpu = dma_alloc_coherent(&pdev->dev, PAGE_SIZE, -+ &host->sg_dma, GFP_KERNEL); -+ if (!host->sg_cpu) { -+ dev_err(&pdev->dev, "Failed to allocate DMA descriptor mem\n"); -+ ret = -ENOMEM; -+ goto error_free_host; -+ } -+ -+ mmc->ops = &sunxi_mmc_ops; -+ mmc->max_blk_count = 8192; -+ mmc->max_blk_size = 4096; -+ mmc->max_segs = PAGE_SIZE / sizeof(struct sunxi_idma_des); -+ mmc->max_seg_size = (1 << host->idma_des_size_bits); -+ mmc->max_req_size = mmc->max_seg_size * mmc->max_segs; -+ /* 400kHz ~ 50MHz */ -+ mmc->f_min = 400000; -+ mmc->f_max = 50000000; -+ /* available voltages */ -+ if (!IS_ERR(host->vmmc)) -+ mmc->ocr_avail = mmc_regulator_get_ocrmask(host->vmmc); -+ else -+ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; -+ -+ mmc->caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | -+ MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 | MMC_CAP_UHS_SDR50 | -+ MMC_CAP_UHS_DDR50 | MMC_CAP_SDIO_IRQ | MMC_CAP_DRIVER_TYPE_A; -+ mmc->caps2 = MMC_CAP2_NO_PRESCAN_POWERUP; -+ -+ ret = mmc_add_host(mmc); -+ -+ if (ret) -+ goto error_free_dma; -+ -+ dev_info(&pdev->dev, "base:0x%p irq:%u\n", host->reg_base, host->irq); -+ platform_set_drvdata(pdev, mmc); -+ return 0; -+ -+error_free_dma: -+ dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma); -+error_free_host: -+ mmc_free_host(mmc); -+ return ret; -+} -+ -+static int sunxi_mmc_remove(struct platform_device *pdev) -+{ -+ struct mmc_host *mmc = platform_get_drvdata(pdev); -+ struct sunxi_mmc_host *host = mmc_priv(mmc); -+ -+ mmc_remove_host(mmc); -+ sunxi_mmc_exit_host(host); -+ tasklet_disable(&host->tasklet); -+ dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma); -+ mmc_free_host(mmc); -+ -+ return 0; -+} -+ -+static struct platform_driver sunxi_mmc_driver = { -+ .driver = { -+ .name = "sunxi-mmc", -+ .owner = THIS_MODULE, -+ .of_match_table = of_match_ptr(sunxi_mmc_of_match), -+ }, -+ .probe = sunxi_mmc_probe, -+ .remove = sunxi_mmc_remove, -+}; -+module_platform_driver(sunxi_mmc_driver); -+ -+MODULE_DESCRIPTION("Allwinner's SD/MMC Card Controller Driver"); -+MODULE_LICENSE("GPL v2"); -+MODULE_AUTHOR("David Lanzendörfer "); -+MODULE_ALIAS("platform:sunxi-mmc"); -diff --git a/drivers/mmc/host/sunxi-mmc.h b/drivers/mmc/host/sunxi-mmc.h -new file mode 100644 -index 0000000..cbd6d49 ---- /dev/null -+++ b/drivers/mmc/host/sunxi-mmc.h -@@ -0,0 +1,239 @@ -+/* -+ * Driver for sunxi SD/MMC host controllers -+ * (C) Copyright 2014-2015 Reuuimlla Technology Co., Ltd. -+ * (C) Copyright 2014-2015 Aaron Maoye -+ * (C) Copyright 2014-2015 O2S GmbH -+ * (C) Copyright 2014-2015 David Lanzendörfer -+ * (C) Copyright 2014-2015 Hans de Goede -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ */ -+ -+#ifndef __SUNXI_MCI_H__ -+#define __SUNXI_MCI_H__ -+ -+/* register offset define */ -+#define SDXC_REG_GCTRL (0x00) /* SMC Global Control Register */ -+#define SDXC_REG_CLKCR (0x04) /* SMC Clock Control Register */ -+#define SDXC_REG_TMOUT (0x08) /* SMC Time Out Register */ -+#define SDXC_REG_WIDTH (0x0C) /* SMC Bus Width Register */ -+#define SDXC_REG_BLKSZ (0x10) /* SMC Block Size Register */ -+#define SDXC_REG_BCNTR (0x14) /* SMC Byte Count Register */ -+#define SDXC_REG_CMDR (0x18) /* SMC Command Register */ -+#define SDXC_REG_CARG (0x1C) /* SMC Argument Register */ -+#define SDXC_REG_RESP0 (0x20) /* SMC Response Register 0 */ -+#define SDXC_REG_RESP1 (0x24) /* SMC Response Register 1 */ -+#define SDXC_REG_RESP2 (0x28) /* SMC Response Register 2 */ -+#define SDXC_REG_RESP3 (0x2C) /* SMC Response Register 3 */ -+#define SDXC_REG_IMASK (0x30) /* SMC Interrupt Mask Register */ -+#define SDXC_REG_MISTA (0x34) /* SMC Masked Interrupt Status Register */ -+#define SDXC_REG_RINTR (0x38) /* SMC Raw Interrupt Status Register */ -+#define SDXC_REG_STAS (0x3C) /* SMC Status Register */ -+#define SDXC_REG_FTRGL (0x40) /* SMC FIFO Threshold Watermark Registe */ -+#define SDXC_REG_FUNS (0x44) /* SMC Function Select Register */ -+#define SDXC_REG_CBCR (0x48) /* SMC CIU Byte Count Register */ -+#define SDXC_REG_BBCR (0x4C) /* SMC BIU Byte Count Register */ -+#define SDXC_REG_DBGC (0x50) /* SMC Debug Enable Register */ -+#define SDXC_REG_HWRST (0x78) /* SMC Card Hardware Reset for Register */ -+#define SDXC_REG_DMAC (0x80) /* SMC IDMAC Control Register */ -+#define SDXC_REG_DLBA (0x84) /* SMC IDMAC Descriptor List Base Addre */ -+#define SDXC_REG_IDST (0x88) /* SMC IDMAC Status Register */ -+#define SDXC_REG_IDIE (0x8C) /* SMC IDMAC Interrupt Enable Register */ -+#define SDXC_REG_CHDA (0x90) -+#define SDXC_REG_CBDA (0x94) -+ -+#define mci_readl(host, reg) \ -+ readl((host)->reg_base + SDXC_##reg) -+#define mci_writel(host, reg, value) \ -+ writel((value), (host)->reg_base + SDXC_##reg) -+ -+/* global control register bits */ -+#define SDXC_SOFT_RESET BIT(0) -+#define SDXC_FIFO_RESET BIT(1) -+#define SDXC_DMA_RESET BIT(2) -+#define SDXC_HARDWARE_RESET (SDXC_SOFT_RESET|SDXC_FIFO_RESET|SDXC_DMA_RESET) -+#define SDXC_INTERRUPT_ENABLE_BIT BIT(4) -+#define SDXC_DMA_ENABLE_BIT BIT(5) -+#define SDXC_DEBOUNCE_ENABLE_BIT BIT(8) -+#define SDXC_POSEDGE_LATCH_DATA BIT(9) -+#define SDXC_DDR_MODE BIT(10) -+#define SDXC_MEMORY_ACCESS_DONE BIT(29) -+#define SDXC_ACCESS_DONE_DIRECT BIT(30) -+#define SDXC_ACCESS_BY_AHB BIT(31) -+#define SDXC_ACCESS_BY_DMA (0U << 31) -+/* clock control bits */ -+#define SDXC_CARD_CLOCK_ON BIT(16) -+#define SDXC_LOW_POWER_ON BIT(17) -+/* bus width */ -+#define SDXC_WIDTH1 (0) -+#define SDXC_WIDTH4 (1) -+#define SDXC_WIDTH8 (2) -+/* smc command bits */ -+#define SDXC_RESPONSE_EXPIRE BIT(6) -+#define SDXC_LONG_RESPONSE BIT(7) -+#define SDXC_CHECK_RESPONSE_CRC BIT(8) -+#define SDXC_DATA_EXPIRE BIT(9) -+#define SDXC_WRITE BIT(10) -+#define SDXC_SEQUENCE_MODE BIT(11) -+#define SDXC_SEND_AUTO_STOP BIT(12) -+#define SDXC_WAIT_PRE_OVER BIT(13) -+#define SDXC_STOP_ABORT_CMD BIT(14) -+#define SDXC_SEND_INIT_SEQUENCE BIT(15) -+#define SDXC_UPCLK_ONLY BIT(21) -+#define SDXC_READ_CEATA_DEV BIT(22) -+#define SDXC_CCS_EXPIRE BIT(23) -+#define SDXC_ENABLE_BIT_BOOT BIT(24) -+#define SDXC_ALT_BOOT_OPTIONS BIT(25) -+#define SDXC_BOOT_ACK_EXPIRE BIT(26) -+#define SDXC_BOOT_ABORT BIT(27) -+#define SDXC_VOLTAGE_SWITCH BIT(28) -+#define SDXC_USE_HOLD_REGISTER BIT(29) -+#define SDXC_START BIT(31) -+/* interrupt bits */ -+#define SDXC_RESPONSE_ERROR BIT(1) -+#define SDXC_COMMAND_DONE BIT(2) -+#define SDXC_DATA_OVER BIT(3) -+#define SDXC_TX_DATA_REQUEST BIT(4) -+#define SDXC_RX_DATA_REQUEST BIT(5) -+#define SDXC_RESPONSE_CRC_ERROR BIT(6) -+#define SDXC_DATA_CRC_ERROR BIT(7) -+#define SDXC_RESPONSE_TIMEOUT BIT(8) -+#define SDXC_DATA_TIMEOUT BIT(9) -+#define SDXC_VOLTAGE_CHANGE_DONE BIT(10) -+#define SDXC_FIFO_RUN_ERROR BIT(11) -+#define SDXC_HARD_WARE_LOCKED BIT(12) -+#define SDXC_START_BIT_ERROR BIT(13) -+#define SDXC_AUTO_COMMAND_DONE BIT(14) -+#define SDXC_END_BIT_ERROR BIT(15) -+#define SDXC_SDIO_INTERRUPT BIT(16) -+#define SDXC_CARD_INSERT BIT(30) -+#define SDXC_CARD_REMOVE BIT(31) -+#define SDXC_INTERRUPT_ERROR_BIT (SDXC_RESPONSE_ERROR | SDXC_RESPONSE_CRC_ERROR | \ -+ SDXC_DATA_CRC_ERROR | SDXC_RESPONSE_TIMEOUT | \ -+ SDXC_DATA_TIMEOUT | SDXC_FIFO_RUN_ERROR | \ -+ SDXC_HARD_WARE_LOCKED | SDXC_START_BIT_ERROR | \ -+ SDXC_END_BIT_ERROR) /* 0xbbc2 */ -+#define SDXC_INTERRUPT_DONE_BIT (SDXC_AUTO_COMMAND_DONE | SDXC_DATA_OVER | \ -+ SDXC_COMMAND_DONE | SDXC_VOLTAGE_CHANGE_DONE) -+/* status */ -+#define SDXC_RXWL_FLAG BIT(0) -+#define SDXC_TXWL_FLAG BIT(1) -+#define SDXC_FIFO_EMPTY BIT(2) -+#define SDXC_FIFO_FULL BIT(3) -+#define SDXC_CARD_PRESENT BIT(8) -+#define SDXC_CARD_DATA_BUSY BIT(9) -+#define SDXC_DATA_FSM_BUSY BIT(10) -+#define SDXC_DMA_REQUEST BIT(31) -+#define SDXC_FIFO_SIZE (16) -+/* Function select */ -+#define SDXC_CEATA_ON (0xceaaU << 16) -+#define SDXC_SEND_IRQ_RESPONSE BIT(0) -+#define SDXC_SDIO_READ_WAIT BIT(1) -+#define SDXC_ABORT_READ_DATA BIT(2) -+#define SDXC_SEND_CCSD BIT(8) -+#define SDXC_SEND_AUTO_STOPCCSD BIT(9) -+#define SDXC_CEATA_DEV_INTERRUPT_ENABLE_BIT BIT(10) -+/* IDMA controller bus mod bit field */ -+#define SDXC_IDMAC_SOFT_RESET BIT(0) -+#define SDXC_IDMAC_FIX_BURST BIT(1) -+#define SDXC_IDMAC_IDMA_ON BIT(7) -+#define SDXC_IDMAC_REFETCH_DES BIT(31) -+/* IDMA status bit field */ -+#define SDXC_IDMAC_TRANSMIT_INTERRUPT BIT(0) -+#define SDXC_IDMAC_RECEIVE_INTERRUPT BIT(1) -+#define SDXC_IDMAC_FATAL_BUS_ERROR BIT(2) -+#define SDXC_IDMAC_DESTINATION_INVALID BIT(4) -+#define SDXC_IDMAC_CARD_ERROR_SUM BIT(5) -+#define SDXC_IDMAC_NORMAL_INTERRUPT_SUM BIT(8) -+#define SDXC_IDMAC_ABNORMAL_INTERRUPT_SUM BIT(9) -+#define SDXC_IDMAC_HOST_ABORT_INTERRUPT_TX BIT(10) -+#define SDXC_IDMAC_HOST_ABORT_INTERRUPT_RX BIT(10) -+#define SDXC_IDMAC_IDLE (0U << 13) -+#define SDXC_IDMAC_SUSPEND (1U << 13) -+#define SDXC_IDMAC_DESC_READ (2U << 13) -+#define SDXC_IDMAC_DESC_CHECK (3U << 13) -+#define SDXC_IDMAC_READ_REQUEST_WAIT (4U << 13) -+#define SDXC_IDMAC_WRITE_REQUEST_WAIT (5U << 13) -+#define SDXC_IDMAC_READ (6U << 13) -+#define SDXC_IDMAC_WRITE (7U << 13) -+#define SDXC_IDMAC_DESC_CLOSE (8U << 13) -+ -+/* -+* If the idma-des-size-bits of property is ie 13, bufsize bits are: -+* Bits 0-12: buf1 size -+* Bits 13-25: buf2 size -+* Bits 26-31: not used -+* Since we only ever set buf1 size, we can simply store it directly. -+*/ -+#define SDXC_IDMAC_DES0_DIC BIT(1) /* disable interrupt on completion */ -+#define SDXC_IDMAC_DES0_LD BIT(2) /* last descriptor */ -+#define SDXC_IDMAC_DES0_FD BIT(3) /* first descriptor */ -+#define SDXC_IDMAC_DES0_CH BIT(4) /* chain mode */ -+#define SDXC_IDMAC_DES0_ER BIT(5) /* end of ring */ -+#define SDXC_IDMAC_DES0_CES BIT(30) /* card error summary */ -+#define SDXC_IDMAC_DES0_OWN BIT(31) /* 1-idma owns it, 0-host owns it */ -+ -+struct sunxi_idma_des { -+ u32 config; -+ u32 buf_size; -+ u32 buf_addr_ptr1; -+ u32 buf_addr_ptr2; -+}; -+ -+struct sunxi_mmc_host { -+ struct mmc_host *mmc; -+ struct regulator *vmmc; -+ -+ /* IO mapping base */ -+ void __iomem *reg_base; -+ -+ spinlock_t lock; -+ struct tasklet_struct tasklet; -+ -+ /* clock management */ -+ struct clk *clk_ahb; -+ struct clk *clk_mod; -+ -+ /* ios information */ -+ u32 clk_mod_rate; -+ u32 bus_width; -+ u32 idma_des_size_bits; -+ u32 ddr; -+ u32 voltage_switching; -+ -+ /* irq */ -+ int irq; -+ u32 int_sum; -+ u32 sdio_imask; -+ -+ /* flags */ -+ u32 power_on:1; -+ u32 io_flag:1; -+ u32 wait_dma:1; -+ -+ dma_addr_t sg_dma; -+ void *sg_cpu; -+ -+ struct mmc_request *mrq; -+ u32 ferror; -+}; -+ -+#define MMC_CLK_400K 0 -+#define MMC_CLK_25M 1 -+#define MMC_CLK_50M 2 -+#define MMC_CLK_50MDDR 3 -+#define MMC_CLK_50MDDR_8BIT 4 -+#define MMC_CLK_100M 5 -+#define MMC_CLK_200M 6 -+#define MMC_CLK_MOD_NUM 7 -+ -+struct sunxi_mmc_clk_dly { -+ u32 mode; -+ u32 oclk_dly; -+ u32 sclk_dly; -+}; -+ -+#endif --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/170-2-mmc-simplify-clkdelay.patch b/target/linux/sunxi/patches-3.13/170-2-mmc-simplify-clkdelay.patch deleted file mode 100644 index e9685768c8..0000000000 --- a/target/linux/sunxi/patches-3.13/170-2-mmc-simplify-clkdelay.patch +++ /dev/null @@ -1,56 +0,0 @@ -From 40889884d53094fe9987a45f9df99fdf1f311910 Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Sun, 16 Feb 2014 10:47:51 +0100 -Subject: [PATCH] sunxi-mmc: Simplify clk delay setting - -clk_sunxi_mmc_phase_control() does its own locking, so there is no need to -lock at the host. Without the locking having a separate sunxi_mmc_set_clk_dly() -makes no sense, so simply call clk_sunxi_mmc_phase_control() directly. - -Signed-off-by: Hans de Goede ---- - drivers/mmc/host/sunxi-mmc.c | 14 ++------------ - 1 file changed, 2 insertions(+), 12 deletions(-) - -diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c -index f33bc30..f4bfaf0 100644 ---- a/drivers/mmc/host/sunxi-mmc.c -+++ b/drivers/mmc/host/sunxi-mmc.c -@@ -420,17 +420,6 @@ static void sunxi_mmc_oclk_onoff(struct sunxi_mmc_host *host, u32 oclk_en) - } - } - --static void sunxi_mmc_set_clk_dly(struct sunxi_mmc_host *smc_host, -- u32 oclk_dly, u32 sclk_dly) --{ -- unsigned long iflags; -- struct clk_hw *hw = __clk_get_hw(smc_host->clk_mod); -- -- spin_lock_irqsave(&smc_host->lock, iflags); -- clk_sunxi_mmc_phase_control(hw, sclk_dly, oclk_dly); -- spin_unlock_irqrestore(&smc_host->lock, iflags); --} -- - struct sunxi_mmc_clk_dly mmc_clk_dly[MMC_CLK_MOD_NUM] = { - { MMC_CLK_400K, 0, 7 }, - { MMC_CLK_25M, 0, 5 }, -@@ -450,6 +439,7 @@ static void sunxi_mmc_clk_set_rate(struct sunxi_mmc_host *smc_host, - u32 sclk_dly; - u32 temp; - struct sunxi_mmc_clk_dly *dly = NULL; -+ struct clk_hw *hw = __clk_get_hw(smc_host->clk_mod); - - newrate = clk_round_rate(smc_host->clk_mod, rate); - if (smc_host->clk_mod_rate == newrate) { -@@ -508,7 +498,7 @@ static void sunxi_mmc_clk_set_rate(struct sunxi_mmc_host *smc_host, - sclk_dly--; - } - -- sunxi_mmc_set_clk_dly(smc_host, oclk_dly, sclk_dly); -+ clk_sunxi_mmc_phase_control(hw, sclk_dly, oclk_dly); - sunxi_mmc_oclk_onoff(smc_host, 1); - - /* oclk_onoff sets various irq status bits, clear these */ --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/170-3-mmc-dont-set-mmc_clk-in-lowpower.patch b/target/linux/sunxi/patches-3.13/170-3-mmc-dont-set-mmc_clk-in-lowpower.patch deleted file mode 100644 index 843d39ef62..0000000000 --- a/target/linux/sunxi/patches-3.13/170-3-mmc-dont-set-mmc_clk-in-lowpower.patch +++ /dev/null @@ -1,49 +0,0 @@ -From 0a6ec6db90c73b037428bf3a94a6281754007c25 Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Mon, 17 Feb 2014 16:55:54 +0100 -Subject: [PATCH] sunxi-mmc: Don't set mmc clk in low power mode - -The android driver uses an io-flag to descern whether a controller is -hooked up to a sdcard slot, or to an onboard sdio dev. And for sdcard slots -it sets the clock in a low-power mode. - -This is causing transmission errors when talking to the sdio-wifi on the -cubietruck, and this may be the cause of problems with some type sdcards -too. This patch fixes things by simply never setting the clk in low power -mode. - -Signed-off-by: Hans de Goede ---- - drivers/mmc/host/sunxi-mmc.c | 3 --- - drivers/mmc/host/sunxi-mmc.h | 1 - - 2 files changed, 4 deletions(-) - -diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c -index f4bfaf0..c1a9d8a 100644 ---- a/drivers/mmc/host/sunxi-mmc.c -+++ b/drivers/mmc/host/sunxi-mmc.c -@@ -400,9 +400,6 @@ static void sunxi_mmc_oclk_onoff(struct sunxi_mmc_host *host, u32 oclk_en) - if (oclk_en) - rval |= SDXC_CARD_CLOCK_ON; - -- if (!host->io_flag) -- rval |= SDXC_LOW_POWER_ON; -- - mci_writel(host, REG_CLKCR, rval); - - rval = SDXC_START | SDXC_UPCLK_ONLY | SDXC_WAIT_PRE_OVER; -diff --git a/drivers/mmc/host/sunxi-mmc.h b/drivers/mmc/host/sunxi-mmc.h -index cbd6d49..a738850 100644 ---- a/drivers/mmc/host/sunxi-mmc.h -+++ b/drivers/mmc/host/sunxi-mmc.h -@@ -211,7 +211,6 @@ struct sunxi_mmc_host { - - /* flags */ - u32 power_on:1; -- u32 io_flag:1; - u32 wait_dma:1; - - dma_addr_t sg_dma; --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/170-4-mmc-stop-claiming-UHS.patch b/target/linux/sunxi/patches-3.13/170-4-mmc-stop-claiming-UHS.patch deleted file mode 100644 index 2ff34be50c..0000000000 --- a/target/linux/sunxi/patches-3.13/170-4-mmc-stop-claiming-UHS.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 3ec947a9717509e204c7f09609717951beb7ef04 Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Mon, 17 Feb 2014 17:11:58 +0100 -Subject: [PATCH] sunxi-mmc: Stop claiming UHS modes - -UHS requires a regulator to set the signaling voltage, as well as special -code to handle the signal voltage switching. We've never added the code -for this from the android driver to the upstream driver, so stop claiming -support for this. - -Signed-off-by: Hans de Goede ---- - drivers/mmc/host/sunxi-mmc.c | 3 +-- - 1 file changed, 1 insertion(+), 2 deletions(-) - -diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c -index c1a9d8a..2eaed10 100644 ---- a/drivers/mmc/host/sunxi-mmc.c -+++ b/drivers/mmc/host/sunxi-mmc.c -@@ -803,8 +803,7 @@ static int sunxi_mmc_probe(struct platform_device *pdev) - mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; - - mmc->caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | -- MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 | MMC_CAP_UHS_SDR50 | -- MMC_CAP_UHS_DDR50 | MMC_CAP_SDIO_IRQ | MMC_CAP_DRIVER_TYPE_A; -+ MMC_CAP_SDIO_IRQ; - mmc->caps2 = MMC_CAP2_NO_PRESCAN_POWERUP; - - ret = mmc_add_host(mmc); --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/170-5-mmc-fix-caps-override.patch b/target/linux/sunxi/patches-3.13/170-5-mmc-fix-caps-override.patch deleted file mode 100644 index 9118563053..0000000000 --- a/target/linux/sunxi/patches-3.13/170-5-mmc-fix-caps-override.patch +++ /dev/null @@ -1,34 +0,0 @@ -From dffb4d4d1fe3a6ba93102756152ec4518dbeac00 Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Mon, 17 Feb 2014 17:13:19 +0100 -Subject: [PATCH] sunxi-mmc: Or in caps, rather then overriding them - -Now that we use mmc_of_parse() there are already some caps set by mmc_of_parse, -so or in our driver caps, rather then using an assignment. This fixes the -card running only in 1 bit mode instead of 4 bit mode problem we've had -since we switched to using mmc_of_parse(). - -Signed-off-by: Hans de Goede ---- - drivers/mmc/host/sunxi-mmc.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c -index 2eaed10..d5e8ff9 100644 ---- a/drivers/mmc/host/sunxi-mmc.c -+++ b/drivers/mmc/host/sunxi-mmc.c -@@ -802,9 +802,9 @@ static int sunxi_mmc_probe(struct platform_device *pdev) - else - mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; - -- mmc->caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | -+ mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | - MMC_CAP_SDIO_IRQ; -- mmc->caps2 = MMC_CAP2_NO_PRESCAN_POWERUP; -+ mmc->caps2 |= MMC_CAP2_NO_PRESCAN_POWERUP; - - ret = mmc_add_host(mmc); - --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/170-6-mmc-dont-call-mmc_of_parser-until-ready.patch b/target/linux/sunxi/patches-3.13/170-6-mmc-dont-call-mmc_of_parser-until-ready.patch deleted file mode 100644 index 21aee136c5..0000000000 --- a/target/linux/sunxi/patches-3.13/170-6-mmc-dont-call-mmc_of_parser-until-ready.patch +++ /dev/null @@ -1,45 +0,0 @@ -From 73797537f3904fec60a647b3b209bf7add092ad5 Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Mon, 17 Feb 2014 21:59:08 +0100 -Subject: [PATCH] sunxi-mmc: Don't call mmc_of_parse until we're ready to - -mmc_of_parse registers an irq handler for the gpio pins for cd, this irq -handler will reference host->ops, so don't call mmc_of_parse until we're -done setting everything up. - -Signed-off-by: Hans de Goede ---- - drivers/mmc/host/sunxi-mmc.c | 9 ++++----- - 1 file changed, 4 insertions(+), 5 deletions(-) - -diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c -index d5e8ff9..cceae68 100644 ---- a/drivers/mmc/host/sunxi-mmc.c -+++ b/drivers/mmc/host/sunxi-mmc.c -@@ -766,10 +766,6 @@ static int sunxi_mmc_probe(struct platform_device *pdev) - return -ENOMEM; - } - -- ret = mmc_of_parse(mmc); -- if (ret) -- goto error_free_host; -- - host = mmc_priv(mmc); - host->mmc = mmc; - spin_lock_init(&host->lock); -@@ -806,8 +802,11 @@ static int sunxi_mmc_probe(struct platform_device *pdev) - MMC_CAP_SDIO_IRQ; - mmc->caps2 |= MMC_CAP2_NO_PRESCAN_POWERUP; - -- ret = mmc_add_host(mmc); -+ ret = mmc_of_parse(mmc); -+ if (ret) -+ goto error_free_dma; - -+ ret = mmc_add_host(mmc); - if (ret) - goto error_free_dma; - --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/170-7-clk-export-mmc-phasectrl.patch b/target/linux/sunxi/patches-3.13/170-7-clk-export-mmc-phasectrl.patch deleted file mode 100644 index f9cdcc67ec..0000000000 --- a/target/linux/sunxi/patches-3.13/170-7-clk-export-mmc-phasectrl.patch +++ /dev/null @@ -1,42 +0,0 @@ -From 7bd0d82ef525e8949425fe271fb86eacf3822821 Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Sun, 15 Dec 2013 19:44:01 +0100 -Subject: [PATCH] ARM: sunxi: clk: export clk_sunxi_mmc_phase_control - -Signed-off-by: Hans de Goede ---- - include/linux/clk/sunxi.h | 22 ++++++++++++++++++++++ - 1 file changed, 22 insertions(+) - create mode 100644 include/linux/clk/sunxi.h - -diff --git a/include/linux/clk/sunxi.h b/include/linux/clk/sunxi.h -new file mode 100644 -index 0000000..1ef5c89 ---- /dev/null -+++ b/include/linux/clk/sunxi.h -@@ -0,0 +1,22 @@ -+/* -+ * Copyright 2013 - Hans de Goede -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#ifndef __LINUX_CLK_SUNXI_H_ -+#define __LINUX_CLK_SUNXI_H_ -+ -+#include -+ -+void clk_sunxi_mmc_phase_control(struct clk_hw *hw, u8 sample, u8 output); -+ -+#endif --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/170-8-clk-sunxi-implement-mmc-phasectrl.patch b/target/linux/sunxi/patches-3.13/170-8-clk-sunxi-implement-mmc-phasectrl.patch deleted file mode 100644 index f3b7f5ae91..0000000000 --- a/target/linux/sunxi/patches-3.13/170-8-clk-sunxi-implement-mmc-phasectrl.patch +++ /dev/null @@ -1,62 +0,0 @@ -From fcba369ee1af8657353bb1e37807aa492c462263 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Emilio=20L=C3=B3pez?= -Date: Fri, 20 Sep 2013 20:29:17 -0300 -Subject: [PATCH] clk: sunxi: Implement MMC phase control -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Emilio López ---- - drivers/clk/sunxi/clk-sunxi.c | 35 +++++++++++++++++++++++++++++++++++ - 1 file changed, 35 insertions(+) - -diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c -index 3283179..46a38b4 100644 ---- a/drivers/clk/sunxi/clk-sunxi.c -+++ b/drivers/clk/sunxi/clk-sunxi.c -@@ -500,6 +500,41 @@ static void __init sun7i_a20_gmac_clk_setup(struct device_node *node) - - - /** -+ * clk_sunxi_mmc_phase_control() - configures MMC clock phase control -+ */ -+ -+void clk_sunxi_mmc_phase_control(struct clk_hw *hw, u8 sample, u8 output) -+{ -+ #define to_clk_composite(_hw) container_of(_hw, struct clk_composite, hw) -+ #define to_clk_factors(_hw) container_of(_hw, struct clk_factors, hw) -+ -+ struct clk_composite *composite = to_clk_composite(hw); -+ struct clk_hw *rate_hw = composite->rate_hw; -+ struct clk_factors *factors = to_clk_factors(rate_hw); -+ unsigned long flags = 0; -+ u32 reg; -+ -+ if (factors->lock) -+ spin_lock_irqsave(factors->lock, flags); -+ -+ reg = readl(factors->reg); -+ -+ /* set sample clock phase control */ -+ reg &= ~(0x7 << 20); -+ reg |= ((sample & 0x7) << 20); -+ -+ /* set output clock phase control */ -+ reg &= ~(0x7 << 8); -+ reg |= ((output & 0x7) << 8); -+ -+ writel(reg, factors->reg); -+ -+ if (factors->lock) -+ spin_unlock_irqrestore(factors->lock, flags); -+} -+ -+ -+/** - * sunxi_factors_clk_setup() - Setup function for factor clocks - */ - --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/170-9-mmc-fixup-revert-sdio.patch b/target/linux/sunxi/patches-3.13/170-9-mmc-fixup-revert-sdio.patch deleted file mode 100644 index 90727f3e0b..0000000000 --- a/target/linux/sunxi/patches-3.13/170-9-mmc-fixup-revert-sdio.patch +++ /dev/null @@ -1,44 +0,0 @@ -From 0483aa124d32bdcafc84623a31141a49e71cc72d Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Sun, 16 Feb 2014 08:54:20 +0100 -Subject: [PATCH] sunxi-mmc: fixup: revert "add host initialization for when - the sdio irq is enabled" - -This is not necessary since when the host is not initialized at this point -yet the irq line from the mmc controller is not enabled, so writing the -host controller interrupt mask cannot cause interrupts at this point. - -More over doing this is wrong, as it leads to unbalanced calling of -clk_prepare_enable and regulator_power_on. - -Signed-off-by: Hans de Goede ---- - drivers/mmc/host/sunxi-mmc.c | 9 --------- - 1 file changed, 9 deletions(-) - -diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c -index 2dc446c..f33bc30 100644 ---- a/drivers/mmc/host/sunxi-mmc.c -+++ b/drivers/mmc/host/sunxi-mmc.c -@@ -593,18 +593,9 @@ static void sunxi_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable) - { - struct sunxi_mmc_host *smc_host = mmc_priv(mmc); - unsigned long flags; -- int ret; - u32 imask; - - spin_lock_irqsave(&smc_host->lock, flags); -- -- /* Make sure the controller is in a sane state before enabling irqs */ -- ret = sunxi_mmc_init_host(host->mmc); -- if (ret) { -- spin_unlock_irqrestore(&smc_host->lock, flags); -- return ret; -- } -- - imask = mci_readl(smc_host, REG_IMASK); - if (enable) { - smc_host->sdio_imask = SDXC_SDIO_INTERRUPT; --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/171-1-pinctrl-sunxi-fix-port-F-multiplexing.patch b/target/linux/sunxi/patches-3.13/171-1-pinctrl-sunxi-fix-port-F-multiplexing.patch deleted file mode 100644 index 60c6448cd4..0000000000 --- a/target/linux/sunxi/patches-3.13/171-1-pinctrl-sunxi-fix-port-F-multiplexing.patch +++ /dev/null @@ -1,56 +0,0 @@ -From 85f17a0d652853455ac633fc965cea8431038518 Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Sat, 14 Dec 2013 17:20:13 +0100 -Subject: [PATCH] pinctrl-sunxi: Fix sun5i-a13 port F multiplexing - -The correct value for selecting the mmc0 function on port F pins is 2 not 4, -as per the data-sheet: -http://dl.linux-sunxi.org/A13/A13%20Datasheet%20-%20v1.12%20%282012-03-29%29.pdf - -Signed-off-by: Hans de Goede -Acked-by: Maxime Ripard ---- - drivers/pinctrl/pinctrl-sunxi-pins.h | 12 ++++++------ - 1 file changed, 6 insertions(+), 6 deletions(-) - -diff --git a/drivers/pinctrl/pinctrl-sunxi-pins.h b/drivers/pinctrl/pinctrl-sunxi-pins.h -index 6fd8d4d..3d60669 100644 ---- a/drivers/pinctrl/pinctrl-sunxi-pins.h -+++ b/drivers/pinctrl/pinctrl-sunxi-pins.h -@@ -1932,27 +1932,27 @@ - SUNXI_PIN(SUNXI_PINCTRL_PIN_PF0, - SUNXI_FUNCTION(0x0, "gpio_in"), - SUNXI_FUNCTION(0x1, "gpio_out"), -- SUNXI_FUNCTION(0x4, "mmc0")), /* D1 */ -+ SUNXI_FUNCTION(0x2, "mmc0")), /* D1 */ - SUNXI_PIN(SUNXI_PINCTRL_PIN_PF1, - SUNXI_FUNCTION(0x0, "gpio_in"), - SUNXI_FUNCTION(0x1, "gpio_out"), -- SUNXI_FUNCTION(0x4, "mmc0")), /* D0 */ -+ SUNXI_FUNCTION(0x2, "mmc0")), /* D0 */ - SUNXI_PIN(SUNXI_PINCTRL_PIN_PF2, - SUNXI_FUNCTION(0x0, "gpio_in"), - SUNXI_FUNCTION(0x1, "gpio_out"), -- SUNXI_FUNCTION(0x4, "mmc0")), /* CLK */ -+ SUNXI_FUNCTION(0x2, "mmc0")), /* CLK */ - SUNXI_PIN(SUNXI_PINCTRL_PIN_PF3, - SUNXI_FUNCTION(0x0, "gpio_in"), - SUNXI_FUNCTION(0x1, "gpio_out"), -- SUNXI_FUNCTION(0x4, "mmc0")), /* CMD */ -+ SUNXI_FUNCTION(0x2, "mmc0")), /* CMD */ - SUNXI_PIN(SUNXI_PINCTRL_PIN_PF4, - SUNXI_FUNCTION(0x0, "gpio_in"), - SUNXI_FUNCTION(0x1, "gpio_out"), -- SUNXI_FUNCTION(0x4, "mmc0")), /* D3 */ -+ SUNXI_FUNCTION(0x2, "mmc0")), /* D3 */ - SUNXI_PIN(SUNXI_PINCTRL_PIN_PF5, - SUNXI_FUNCTION(0x0, "gpio_in"), - SUNXI_FUNCTION(0x1, "gpio_out"), -- SUNXI_FUNCTION(0x4, "mmc0")), /* D2 */ -+ SUNXI_FUNCTION(0x2, "mmc0")), /* D2 */ - /* Hole */ - SUNXI_PIN(SUNXI_PINCTRL_PIN_PG0, - SUNXI_FUNCTION(0x0, "gpio_in"), --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/171-3-pinctrl-sunxi-fix-masking-with-irqtype.patch b/target/linux/sunxi/patches-3.13/171-3-pinctrl-sunxi-fix-masking-with-irqtype.patch deleted file mode 100644 index f600a82c6c..0000000000 --- a/target/linux/sunxi/patches-3.13/171-3-pinctrl-sunxi-fix-masking-with-irqtype.patch +++ /dev/null @@ -1,26 +0,0 @@ -From 9d506cbf0e7b0e017d78f244e2b4c0fc71206c6c Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Sat, 15 Feb 2014 12:56:42 +0100 -Subject: [PATCH] pinctrl-sunxi: Fix masking when setting irq type - -Signed-off-by: Hans de Goede ---- - drivers/pinctrl/pinctrl-sunxi.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/drivers/pinctrl/pinctrl-sunxi.c b/drivers/pinctrl/pinctrl-sunxi.c -index cc9bd1b..917af0a 100644 ---- a/drivers/pinctrl/pinctrl-sunxi.c -+++ b/drivers/pinctrl/pinctrl-sunxi.c -@@ -583,7 +583,7 @@ static int sunxi_pinctrl_irq_set_type(struct irq_data *d, - spin_lock_irqsave(&pctl->lock, flags); - - regval = readl(pctl->membase + reg); -- regval &= ~IRQ_CFG_IRQ_MASK; -+ regval &= ~(IRQ_CFG_IRQ_MASK << index); - writel(regval | (mode << index), pctl->membase + reg); - - spin_unlock_irqrestore(&pctl->lock, flags); --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/171-4-pinctrl-sunxi-fix-irqregister-offset-calcs.patch b/target/linux/sunxi/patches-3.13/171-4-pinctrl-sunxi-fix-irqregister-offset-calcs.patch deleted file mode 100644 index 182cf73b27..0000000000 --- a/target/linux/sunxi/patches-3.13/171-4-pinctrl-sunxi-fix-irqregister-offset-calcs.patch +++ /dev/null @@ -1,46 +0,0 @@ -From a5f3d2672d5b9efe93be0bf66d69156bf806220b Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Mon, 17 Feb 2014 22:04:20 +0100 -Subject: [PATCH] pinctrl-sunxi: Fix interrupt register offset calculation - -This fixing setting the interrupt type for eints >= 8. - -Signed-off-by: Hans de Goede ---- - drivers/pinctrl/pinctrl-sunxi.h | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - -diff --git a/drivers/pinctrl/pinctrl-sunxi.h b/drivers/pinctrl/pinctrl-sunxi.h -index 01c494f..552b0e9 100644 ---- a/drivers/pinctrl/pinctrl-sunxi.h -+++ b/drivers/pinctrl/pinctrl-sunxi.h -@@ -511,7 +511,7 @@ static inline u32 sunxi_pull_offset(u16 pin) - - static inline u32 sunxi_irq_cfg_reg(u16 irq) - { -- u8 reg = irq / IRQ_CFG_IRQ_PER_REG; -+ u8 reg = irq / IRQ_CFG_IRQ_PER_REG * 0x04; - return reg + IRQ_CFG_REG; - } - -@@ -523,7 +523,7 @@ static inline u32 sunxi_irq_cfg_offset(u16 irq) - - static inline u32 sunxi_irq_ctrl_reg(u16 irq) - { -- u8 reg = irq / IRQ_CTRL_IRQ_PER_REG; -+ u8 reg = irq / IRQ_CTRL_IRQ_PER_REG * 0x04; - return reg + IRQ_CTRL_REG; - } - -@@ -535,7 +535,7 @@ static inline u32 sunxi_irq_ctrl_offset(u16 irq) - - static inline u32 sunxi_irq_status_reg(u16 irq) - { -- u8 reg = irq / IRQ_STATUS_IRQ_PER_REG; -+ u8 reg = irq / IRQ_STATUS_IRQ_PER_REG * 0x04; - return reg + IRQ_STATUS_REG; - } - --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/173-1-dt-sun4i-add-mmc.patch b/target/linux/sunxi/patches-3.13/173-1-dt-sun4i-add-mmc.patch deleted file mode 100644 index 5f2679c030..0000000000 --- a/target/linux/sunxi/patches-3.13/173-1-dt-sun4i-add-mmc.patch +++ /dev/null @@ -1,133 +0,0 @@ -From 6c6bc98f6a2b1f91071564efdb77c90307610018 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?David=20Lanzend=C3=B6rfer?= -Date: Sat, 15 Feb 2014 14:02:51 +0100 -Subject: [PATCH] ARM: dts: sun4i: Add support for mmc -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: David Lanzendörfer -Signed-off-by: Hans de Goede ---- - arch/arm/boot/dts/sun4i-a10-a1000.dts | 8 +++++ - arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 8 +++++ - arch/arm/boot/dts/sun4i-a10.dtsi | 54 ++++++++++++++++++++++++++++++ - 3 files changed, 70 insertions(+) - -diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts -index d6ec839..4b2a694 100644 ---- a/arch/arm/boot/dts/sun4i-a10-a1000.dts -+++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts -@@ -35,6 +35,14 @@ - }; - }; - -+ mmc0: mmc@01c0f000 { -+ pinctrl-names = "default", "default"; -+ pinctrl-0 = <&mmc0_pins_a>; -+ pinctrl-1 = <&mmc0_cd_pin_reference_design>; -+ cd-gpios = <&pio 7 1 0>; /* PH1 */ -+ status = "okay"; -+ }; -+ - ahci: sata@01c18000 { - status = "okay"; - }; -diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts -index 6df237d8..ef85b8e 100644 ---- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts -+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts -@@ -34,6 +34,14 @@ - }; - }; - -+ mmc0: mmc@01c0f000 { -+ pinctrl-names = "default", "default"; -+ pinctrl-0 = <&mmc0_pins_a>; -+ pinctrl-1 = <&mmc0_cd_pin_reference_design>; -+ cd-gpios = <&pio 7 1 0>; /* PH1 */ -+ status = "okay"; -+ }; -+ - ahci: sata@01c18000 { - target-supply = <®_ahci_5v>; - status = "okay"; -diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi -index 454077a..a8e0df3 100644 ---- a/arch/arm/boot/dts/sun4i-a10.dtsi -+++ b/arch/arm/boot/dts/sun4i-a10.dtsi -@@ -338,6 +338,50 @@ - #size-cells = <0>; - }; - -+ mmc0: mmc@01c0f000 { -+ compatible = "allwinner,sun4i-a10-mmc"; -+ reg = <0x01c0f000 0x1000>; -+ clocks = <&ahb_gates 8>, <&mmc0_clk>; -+ clock-names = "ahb", "mod"; -+ interrupts = <32>; -+ bus-width = <4>; -+ status = "disabled"; -+ cd-inverted; -+ }; -+ -+ mmc1: mmc@01c10000 { -+ compatible = "allwinner,sun4i-a10-mmc"; -+ reg = <0x01c10000 0x1000>; -+ clocks = <&ahb_gates 9>, <&mmc1_clk>; -+ clock-names = "ahb", "mod"; -+ interrupts = <33>; -+ bus-width = <4>; -+ status = "disabled"; -+ cd-inverted; -+ }; -+ -+ mmc2: mmc@01c11000 { -+ compatible = "allwinner,sun4i-a10-mmc"; -+ reg = <0x01c11000 0x1000>; -+ clocks = <&ahb_gates 10>, <&mmc2_clk>; -+ clock-names = "ahb", "mod"; -+ interrupts = <34>; -+ bus-width = <4>; -+ status = "disabled"; -+ cd-inverted; -+ }; -+ -+ mmc3: mmc@01c12000 { -+ compatible = "allwinner,sun4i-a10-mmc"; -+ reg = <0x01c12000 0x1000>; -+ clocks = <&ahb_gates 11>, <&mmc3_clk>; -+ clock-names = "ahb", "mod"; -+ interrupts = <35>; -+ bus-width = <4>; -+ status = "disabled"; -+ cd-inverted; -+ }; -+ - ahci: sata@01c18000 { - compatible = "allwinner,sun4i-a10-ahci"; - reg = <0x01c18000 0x1000>; -@@ -416,6 +456,20 @@ - allwinner,drive = <0>; - allwinner,pull = <0>; - }; -+ -+ mmc0_pins_a: mmc0@0 { -+ allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; -+ allwinner,function = "mmc0"; -+ allwinner,drive = <2>; -+ allwinner,pull = <0>; -+ }; -+ -+ mmc0_cd_pin_reference_design: mmc0_cd_pin@0 { -+ allwinner,pins = "PH1"; -+ allwinner,function = "gpio_in"; -+ allwinner,drive = <0>; -+ allwinner,pull = <1>; -+ }; - }; - - timer@01c20c00 { --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/173-2-dt-sun5i-add-mmc.patch b/target/linux/sunxi/patches-3.13/173-2-dt-sun5i-add-mmc.patch deleted file mode 100644 index f688b6c965..0000000000 --- a/target/linux/sunxi/patches-3.13/173-2-dt-sun5i-add-mmc.patch +++ /dev/null @@ -1,234 +0,0 @@ -From 5bfbb46a8685de4c67f084aea983fc9a50c882ad Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?David=20Lanzend=C3=B6rfer?= -Date: Sat, 15 Feb 2014 14:02:29 +0100 -Subject: [PATCH] ARM: dts: sun5i: Add support for mmc -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: David Lanzendörfer -Signed-off-by: Hans de Goede ---- - arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 30 ++++++++++++++++ - arch/arm/boot/dts/sun5i-a10s.dtsi | 44 ++++++++++++++++++++++++ - arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts | 15 ++++++++ - arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 15 ++++++++ - arch/arm/boot/dts/sun5i-a13.dtsi | 37 ++++++++++++++++++++ - 5 files changed, 141 insertions(+) - -diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts -index 3c9f8b3..5c7b454 100644 ---- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts -+++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts -@@ -34,7 +34,37 @@ - }; - }; - -+ mmc0: mmc@01c0f000 { -+ pinctrl-names = "default", "default"; -+ pinctrl-0 = <&mmc0_pins_a>; -+ pinctrl-1 = <&mmc0_cd_pin_olinuxino_micro>; -+ cd-gpios = <&pio 6 1 0>; /* PG1 */ -+ status = "okay"; -+ }; -+ -+ mmc1: mmc@01c10000 { -+ pinctrl-names = "default", "default"; -+ pinctrl-0 = <&mmc1_pins_a>; -+ pinctrl-1 = <&mmc1_cd_pin_olinuxino_micro>; -+ cd-gpios = <&pio 6 13 0>; /* PG13 */ -+ status = "okay"; -+ }; -+ - pinctrl@01c20800 { -+ mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 { -+ allwinner,pins = "PG1"; -+ allwinner,function = "gpio_in"; -+ allwinner,drive = <0>; -+ allwinner,pull = <1>; -+ }; -+ -+ mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 { -+ allwinner,pins = "PG13"; -+ allwinner,function = "gpio_in"; -+ allwinner,drive = <0>; -+ allwinner,pull = <1>; -+ }; -+ - led_pins_olinuxino: led_pins@0 { - allwinner,pins = "PE3"; - allwinner,function = "gpio_out"; -diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi -index 3a9b33d..3a7039e 100644 ---- a/arch/arm/boot/dts/sun5i-a10s.dtsi -+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi -@@ -299,6 +299,36 @@ - #size-cells = <0>; - }; - -+ mmc0: mmc@01c0f000 { -+ compatible = "allwinner,sun5i-a13-mmc"; -+ reg = <0x01c0f000 0x1000>; -+ clocks = <&ahb_gates 8>, <&mmc0_clk>; -+ clock-names = "ahb", "mod"; -+ interrupts = <32>; -+ bus-width = <4>; -+ status = "disabled"; -+ }; -+ -+ mmc1: mmc@01c10000 { -+ compatible = "allwinner,sun5i-a13-mmc"; -+ reg = <0x01c10000 0x1000>; -+ clocks = <&ahb_gates 9>, <&mmc1_clk>; -+ clock-names = "ahb", "mod"; -+ interrupts = <33>; -+ bus-width = <4>; -+ status = "disabled"; -+ }; -+ -+ mmc2: mmc@01c11000 { -+ compatible = "allwinner,sun5i-a13-mmc"; -+ reg = <0x01c11000 0x1000>; -+ clocks = <&ahb_gates 10>, <&mmc2_clk>; -+ clock-names = "ahb", "mod"; -+ interrupts = <34>; -+ bus-width = <4>; -+ status = "disabled"; -+ }; -+ - intc: interrupt-controller@01c20400 { - compatible = "allwinner,sun4i-ic"; - reg = <0x01c20400 0x400>; -@@ -369,6 +399,20 @@ - allwinner,drive = <0>; - allwinner,pull = <0>; - }; -+ -+ mmc0_pins_a: mmc0@0 { -+ allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; -+ allwinner,function = "mmc0"; -+ allwinner,drive = <3>; -+ allwinner,pull = <0>; -+ }; -+ -+ mmc1_pins_a: mmc1@0 { -+ allwinner,pins = "PG3","PG4","PG5","PG6","PG7","PG8"; -+ allwinner,function = "mmc1"; -+ allwinner,drive = <3>; -+ allwinner,pull = <0>; -+ }; - }; - - timer@01c20c00 { -diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts -index fe2ce0a..2f08bb2 100644 ---- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts -+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts -@@ -20,7 +20,22 @@ - compatible = "olimex,a13-olinuxino-micro", "allwinner,sun5i-a13"; - - soc@01c00000 { -+ mmc0: mmc@01c0f000 { -+ pinctrl-names = "default", "default"; -+ pinctrl-0 = <&mmc0_pins_a>; -+ pinctrl-1 = <&mmc0_cd_pin_olinuxinom>; -+ cd-gpios = <&pio 6 0 0>; /* PG0 */ -+ status = "okay"; -+ }; -+ - pinctrl@01c20800 { -+ mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 { -+ allwinner,pins = "PG0"; -+ allwinner,function = "gpio_in"; -+ allwinner,drive = <0>; -+ allwinner,pull = <1>; -+ }; -+ - led_pins_olinuxinom: led_pins@0 { - allwinner,pins = "PG9"; - allwinner,function = "gpio_out"; -diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts -index a4ba5ff..a7280f5 100644 ---- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts -+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts -@@ -19,7 +19,22 @@ - compatible = "olimex,a13-olinuxino", "allwinner,sun5i-a13"; - - soc@01c00000 { -+ mmc0: mmc@01c0f000 { -+ pinctrl-names = "default", "default"; -+ pinctrl-0 = <&mmc0_pins_a>; -+ pinctrl-1 = <&mmc0_cd_pin_olinuxino>; -+ cd-gpios = <&pio 6 0 0>; /* PG0 */ -+ status = "okay"; -+ }; -+ - pinctrl@01c20800 { -+ mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 { -+ allwinner,pins = "PG0"; -+ allwinner,function = "gpio_in"; -+ allwinner,drive = <0>; -+ allwinner,pull = <1>; -+ }; -+ - led_pins_olinuxino: led_pins@0 { - allwinner,pins = "PG9"; - allwinner,function = "gpio_out"; -diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi -index 9612c52..63a35b8 100644 ---- a/arch/arm/boot/dts/sun5i-a13.dtsi -+++ b/arch/arm/boot/dts/sun5i-a13.dtsi -@@ -281,6 +281,36 @@ - #size-cells = <1>; - ranges; - -+ mmc0: mmc@01c0f000 { -+ compatible = "allwinner,sun5i-a13-mmc"; -+ reg = <0x01c0f000 0x1000>; -+ clocks = <&ahb_gates 8>, <&mmc0_clk>; -+ clock-names = "ahb", "mod"; -+ interrupts = <32>; -+ bus-width = <4>; -+ status = "disabled"; -+ }; -+ -+ mmc1: mmc@01c10000 { -+ compatible = "allwinner,sun5i-a13-mmc"; -+ reg = <0x01c10000 0x1000>; -+ clocks = <&ahb_gates 9>, <&mmc1_clk>; -+ clock-names = "ahb", "mod"; -+ interrupts = <33>; -+ bus-width = <4>; -+ status = "disabled"; -+ }; -+ -+ mmc2: mmc@01c11000 { -+ compatible = "allwinner,sun5i-a13-mmc"; -+ reg = <0x01c11000 0x1000>; -+ clocks = <&ahb_gates 10>, <&mmc2_clk>; -+ clock-names = "ahb", "mod"; -+ interrupts = <34>; -+ bus-width = <4>; -+ status = "disabled"; -+ }; -+ - intc: interrupt-controller@01c20400 { - compatible = "allwinner,sun4i-ic"; - reg = <0x01c20400 0x400>; -@@ -333,6 +363,13 @@ - allwinner,drive = <0>; - allwinner,pull = <0>; - }; -+ -+ mmc0_pins_a: mmc0@0 { -+ allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; -+ allwinner,function = "mmc0"; -+ allwinner,drive = <3>; -+ allwinner,pull = <0>; -+ }; - }; - - timer@01c20c00 { --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/173-3-dt-sun7i-add-mmc.patch b/target/linux/sunxi/patches-3.13/173-3-dt-sun7i-add-mmc.patch deleted file mode 100644 index e983863f7e..0000000000 --- a/target/linux/sunxi/patches-3.13/173-3-dt-sun7i-add-mmc.patch +++ /dev/null @@ -1,179 +0,0 @@ -From a3bddfdd19c49f0bde7aa2ff496773c575763d07 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?David=20Lanzend=C3=B6rfer?= -Date: Sat, 15 Feb 2014 14:02:01 +0100 -Subject: [PATCH] ARM: dts: sun7i: Add support for mmc -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: David Lanzendörfer -Signed-off-by: Hans de Goede ---- - arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 8 ++++ - arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 8 ++++ - arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 23 ++++++++++ - arch/arm/boot/dts/sun7i-a20.dtsi | 61 +++++++++++++++++++++++++ - 4 files changed, 100 insertions(+) - -diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts -index 07823c2..a8186f5 100644 ---- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts -+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts -@@ -20,6 +20,14 @@ - compatible = "cubietech,cubieboard2", "allwinner,sun7i-a20"; - - soc@01c00000 { -+ mmc0: mmc@01c0f000 { -+ pinctrl-names = "default", "default"; -+ pinctrl-0 = <&mmc0_pins_a>; -+ pinctrl-1 = <&mmc0_cd_pin_reference_design>; -+ cd-gpios = <&pio 7 1 0>; /* PH1 */ -+ status = "okay"; -+ }; -+ - ahci: sata@01c18000 { - target-supply = <®_ahci_5v>; - status = "okay"; -diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts -index 403bd2e..6cd7cca 100644 -diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts -index d5c6799..d4e2355 100644 ---- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts -+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts -@@ -20,12 +20,35 @@ - compatible = "olimex,a20-olinuxino-micro", "allwinner,sun7i-a20"; - - soc@01c00000 { -+ mmc0: mmc@01c0f000 { -+ pinctrl-names = "default", "default"; -+ pinctrl-0 = <&mmc0_pins_a>; -+ pinctrl-1 = <&mmc0_cd_pin_reference_design>; -+ cd-gpios = <&pio 7 1 0>; /* PH1 */ -+ status = "okay"; -+ }; -+ -+ mmc3: mmc@01c12000 { -+ pinctrl-names = "default", "default"; -+ pinctrl-0 = <&mmc3_pins_a>; -+ pinctrl-1 = <&mmc3_cd_pin_olinuxinom>; -+ cd-gpios = <&pio 7 11 0>; /* PH11 */ -+ status = "okay"; -+ }; -+ - ahci: sata@01c18000 { - target-supply = <®_ahci_5v>; - status = "okay"; - }; - - pinctrl@01c20800 { -+ mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 { -+ allwinner,pins = "PH11"; -+ allwinner,function = "gpio_in"; -+ allwinner,drive = <0>; -+ allwinner,pull = <1>; -+ }; -+ - led_pins_olinuxino: led_pins@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; -diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts -index cb25d3c..66bb3ef 100644 ---- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts -+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts -@@ -20,6 +20,14 @@ - compatible = "cubietech,cubietruck", "allwinner,sun7i-a20"; - - soc@01c00000 { -+ mmc0: mmc@01c0f000 { -+ pinctrl-names = "default", "default"; -+ pinctrl-0 = <&mmc0_pins_a>; -+ pinctrl-1 = <&mmc0_cd_pin_reference_design>; -+ cd-gpios = <&pio 7 1 0>; /* PH1 */ -+ status = "okay"; -+ }; -+ - ahci: sata@01c18000 { - target-supply = <®_ahci_5v>; - status = "okay"; -diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi -index 3385994..3bc6ac5 100644 ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -392,6 +392,46 @@ - #size-cells = <0>; - }; - -+ mmc0: mmc@01c0f000 { -+ compatible = "allwinner,sun5i-a13-mmc"; -+ reg = <0x01c0f000 0x1000>; -+ clocks = <&ahb_gates 8>, <&mmc0_clk>; -+ clock-names = "ahb", "mod"; -+ interrupts = <0 32 4>; -+ bus-width = <4>; -+ status = "disabled"; -+ }; -+ -+ mmc1: mmc@01c10000 { -+ compatible = "allwinner,sun5i-a13-mmc"; -+ reg = <0x01c10000 0x1000>; -+ clocks = <&ahb_gates 9>, <&mmc1_clk>; -+ clock-names = "ahb", "mod"; -+ interrupts = <0 33 4>; -+ bus-width = <4>; -+ status = "disabled"; -+ }; -+ -+ mmc2: mmc@01c11000 { -+ compatible = "allwinner,sun5i-a13-mmc"; -+ reg = <0x01c11000 0x1000>; -+ clocks = <&ahb_gates 10>, <&mmc2_clk>; -+ clock-names = "ahb", "mod"; -+ interrupts = <0 34 4>; -+ bus-width = <4>; -+ status = "disabled"; -+ }; -+ -+ mmc3: mmc@01c12000 { -+ compatible = "allwinner,sun5i-a13-mmc"; -+ reg = <0x01c12000 0x1000>; -+ clocks = <&ahb_gates 11>, <&mmc3_clk>; -+ clock-names = "ahb", "mod"; -+ interrupts = <0 35 4>; -+ bus-width = <4>; -+ status = "disabled"; -+ }; -+ - ahci: sata@01c18000 { - compatible = "allwinner,sun4i-a10-ahci"; - reg = <0x01c18000 0x1000>; -@@ -510,6 +550,27 @@ - allwinner,drive = <3>; - allwinner,pull = <0>; - }; -+ -+ mmc0_pins_a: mmc0@0 { -+ allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; -+ allwinner,function = "mmc0"; -+ allwinner,drive = <3>; -+ allwinner,pull = <0>; -+ }; -+ -+ mmc0_cd_pin_reference_design: mmc0_cd_pin@0 { -+ allwinner,pins = "PH1"; -+ allwinner,function = "gpio_in"; -+ allwinner,drive = <0>; -+ allwinner,pull = <1>; -+ }; -+ -+ mmc3_pins_a: mmc3@0 { -+ allwinner,pins = "PI4","PI5","PI6","PI7","PI8","PI9"; -+ allwinner,function = "mmc3"; -+ allwinner,drive = <3>; -+ allwinner,pull = <0>; -+ }; - }; - - timer@01c20c00 { --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/173-5-dt-sun5i-fixup-mmc.patch b/target/linux/sunxi/patches-3.13/173-5-dt-sun5i-fixup-mmc.patch deleted file mode 100644 index 7bbe566243..0000000000 --- a/target/linux/sunxi/patches-3.13/173-5-dt-sun5i-fixup-mmc.patch +++ /dev/null @@ -1,107 +0,0 @@ -From 1fa41bc5a6659e453ca19086f195b02a23dc3bbe Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Mon, 17 Feb 2014 17:25:54 +0100 -Subject: [PATCH] ARM: sun5i: dt: Fixup mmc bindings - -1) Now that we're no longer overriding the caps set by mmc_of_parse we need -to set cd-inverted for our card detection to work. - -2) Now that we no longer claim UHS modes support we will never use any DDR -modes, so drive-strength 2 is enough for the mmc data pins. - -3) mmc1 on the A13 is not routed to any pins, and thus unusable, remove it -from the dtsi - -Signed-off-by: Hans de Goede ---- - arch/arm/boot/dts/sun5i-a10s.dtsi | 7 +++++-- - arch/arm/boot/dts/sun5i-a13.dtsi | 14 +++----------- - 2 files changed, 8 insertions(+), 13 deletions(-) - -diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi -index 3a7039e..15dfa9a 100644 ---- a/arch/arm/boot/dts/sun5i-a10s.dtsi -+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi -@@ -306,6 +306,7 @@ - clock-names = "ahb", "mod"; - interrupts = <32>; - bus-width = <4>; -+ cd-inverted; - status = "disabled"; - }; - -@@ -316,6 +317,7 @@ - clock-names = "ahb", "mod"; - interrupts = <33>; - bus-width = <4>; -+ cd-inverted; - status = "disabled"; - }; - -@@ -326,6 +328,7 @@ - clock-names = "ahb", "mod"; - interrupts = <34>; - bus-width = <4>; -+ cd-inverted; - status = "disabled"; - }; - -@@ -403,14 +406,14 @@ - mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; - allwinner,function = "mmc0"; -- allwinner,drive = <3>; -+ allwinner,drive = <2>; - allwinner,pull = <0>; - }; - - mmc1_pins_a: mmc1@0 { - allwinner,pins = "PG3","PG4","PG5","PG6","PG7","PG8"; - allwinner,function = "mmc1"; -- allwinner,drive = <3>; -+ allwinner,drive = <2>; - allwinner,pull = <0>; - }; - }; -diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi -index 63a35b8..14a99d0 100644 ---- a/arch/arm/boot/dts/sun5i-a13.dtsi -+++ b/arch/arm/boot/dts/sun5i-a13.dtsi -@@ -288,16 +288,7 @@ - clock-names = "ahb", "mod"; - interrupts = <32>; - bus-width = <4>; -- status = "disabled"; -- }; -- -- mmc1: mmc@01c10000 { -- compatible = "allwinner,sun5i-a13-mmc"; -- reg = <0x01c10000 0x1000>; -- clocks = <&ahb_gates 9>, <&mmc1_clk>; -- clock-names = "ahb", "mod"; -- interrupts = <33>; -- bus-width = <4>; -+ cd-inverted; - status = "disabled"; - }; - -@@ -308,6 +299,7 @@ - clock-names = "ahb", "mod"; - interrupts = <34>; - bus-width = <4>; -+ cd-inverted; - status = "disabled"; - }; - -@@ -367,7 +359,7 @@ - mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; - allwinner,function = "mmc0"; -- allwinner,drive = <3>; -+ allwinner,drive = <2>; - allwinner,pull = <0>; - }; - }; --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/173-6-dt-sun7i-fixup-mmc.patch b/target/linux/sunxi/patches-3.13/173-6-dt-sun7i-fixup-mmc.patch deleted file mode 100644 index c1784e3c44..0000000000 --- a/target/linux/sunxi/patches-3.13/173-6-dt-sun7i-fixup-mmc.patch +++ /dev/null @@ -1,73 +0,0 @@ -From e48e7ba7f97e883a24036df04cb474cf7cd22574 Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Mon, 17 Feb 2014 17:16:08 +0100 -Subject: [PATCH] ARM: sun7i: dt: Fixup mmc bindings - -1) Now that we're no longer overriding the caps set by mmc_of_parse we need -to set cd-inverted for our card detection to work. - -2) Now that we no longer claim UHS modes support we will never use any DDR -modes, so drive-strength 2 is enough for the mmc data pins. - -Signed-off-by: Hans de Goede ---- - arch/arm/boot/dts/sun7i-a20.dtsi | 8 ++++++-- - 1 file changed, 6 insertions(+), 2 deletions(-) - -diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi -index 3bc6ac5..f4ecd79 100644 ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -399,6 +399,7 @@ - clock-names = "ahb", "mod"; - interrupts = <0 32 4>; - bus-width = <4>; -+ cd-inverted; - status = "disabled"; - }; - -@@ -409,6 +410,7 @@ - clock-names = "ahb", "mod"; - interrupts = <0 33 4>; - bus-width = <4>; -+ cd-inverted; - status = "disabled"; - }; - -@@ -419,6 +421,7 @@ - clock-names = "ahb", "mod"; - interrupts = <0 34 4>; - bus-width = <4>; -+ cd-inverted; - status = "disabled"; - }; - -@@ -429,6 +432,7 @@ - clock-names = "ahb", "mod"; - interrupts = <0 35 4>; - bus-width = <4>; -+ cd-inverted; - status = "disabled"; - }; - -@@ -554,7 +558,7 @@ - mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; - allwinner,function = "mmc0"; -- allwinner,drive = <3>; -+ allwinner,drive = <2>; - allwinner,pull = <0>; - }; - -@@ -568,7 +572,7 @@ - mmc3_pins_a: mmc3@0 { - allwinner,pins = "PI4","PI5","PI6","PI7","PI8","PI9"; - allwinner,function = "mmc3"; -- allwinner,drive = <3>; -+ allwinner,drive = <2>; - allwinner,pull = <0>; - }; - }; --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/175-lradc-add-driver.patch b/target/linux/sunxi/patches-3.13/175-lradc-add-driver.patch deleted file mode 100644 index dc69d171b1..0000000000 --- a/target/linux/sunxi/patches-3.13/175-lradc-add-driver.patch +++ /dev/null @@ -1,339 +0,0 @@ -From 14cf22b1db1b6e6b7333e8a7245055966f5497e3 Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Wed, 1 Jan 2014 19:44:49 +0100 -Subject: [PATCH] input: Add new sun4i-lradc-keys driver - -Allwinnner sunxi SoCs have a low resolution adc (called lradc) which is -specifically designed to have various (tablet) keys (ie home, back, search, -etc). attached to it using a resistor network. This adds a driver for this. - -There are 2 channels, currently this driver only supports chan0 since there -are no boards known to use chan1. The devicetree properties are already -prefixed with chan0 as preparation for chan1 support in the future. - -This has been tested on an olimex a10s-olinuxino-micro, a13-olinuxino, and -a20-olinuxino-micro. - -Signed-off-by: Hans de Goede ---- - .../devicetree/bindings/input/sun4i-lradc-keys.txt | 22 ++ - drivers/input/keyboard/Kconfig | 10 + - drivers/input/keyboard/Makefile | 1 + - drivers/input/keyboard/sun4i-lradc-keys.c | 243 +++++++++++++++++++++ - 4 files changed, 276 insertions(+) - create mode 100644 Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt - create mode 100644 drivers/input/keyboard/sun4i-lradc-keys.c - -diff --git a/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt b/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt -new file mode 100644 -index 0000000..7801264 ---- /dev/null -+++ b/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt -@@ -0,0 +1,22 @@ -+Allwinner sun4i low res adc attached tablet keys -+------------------------------------------------ -+ -+Required properties: -+ - compatible: "allwinner,sun4i-lradc-keys" -+ - reg: mmio address range of the chip -+ - interrupts: interrupt to which the chip is connected -+ - allwinner,chan0-step: step in mV between keys must be 150 or 200 -+ - linux,chan0-keycodes: array of dt-bindings/input/input.h KEY_ codes -+ -+Example: -+ -+#include -+ -+ lradc: lradc@01c22800 { -+ compatible = "allwinner,sun4i-lradc-keys"; -+ reg = <0x01c22800 0x100>; -+ interrupts = <31>; -+ allwinner,chan0-step = <200>; -+ linux,chan0-keycodes = ; -+ }; -diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig -index a673c9f..d8a51cd 100644 ---- a/drivers/input/keyboard/Kconfig -+++ b/drivers/input/keyboard/Kconfig -@@ -544,6 +544,16 @@ config KEYBOARD_STMPE - To compile this driver as a module, choose M here: the module will be - called stmpe-keypad. - -+config KEYBOARD_SUN4I_LRADC -+ tristate "Allwinner sun4i low res adc attached tablet keys support" -+ depends on ARCH_SUNXI -+ help -+ This selects support for the Allwinner low res adc attached tablet -+ keys found on Allwinner sunxi SoCs. -+ -+ To compile this driver as a module, choose M here: the -+ module will be called sun4i-lradc-keys. -+ - config KEYBOARD_DAVINCI - tristate "TI DaVinci Key Scan" - depends on ARCH_DAVINCI_DM365 -diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile -index a699b61..f3265bd 100644 ---- a/drivers/input/keyboard/Makefile -+++ b/drivers/input/keyboard/Makefile -@@ -50,6 +50,7 @@ obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o - obj-$(CONFIG_KEYBOARD_SPEAR) += spear-keyboard.o - obj-$(CONFIG_KEYBOARD_STMPE) += stmpe-keypad.o - obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o -+obj-$(CONFIG_KEYBOARD_SUN4I_LRADC) += sun4i-lradc-keys.o - obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o - obj-$(CONFIG_KEYBOARD_TC3589X) += tc3589x-keypad.o - obj-$(CONFIG_KEYBOARD_TEGRA) += tegra-kbc.o -diff --git a/drivers/input/keyboard/sun4i-lradc-keys.c b/drivers/input/keyboard/sun4i-lradc-keys.c -new file mode 100644 -index 0000000..5c55e17 ---- /dev/null -+++ b/drivers/input/keyboard/sun4i-lradc-keys.c -@@ -0,0 +1,243 @@ -+/* -+ * Allwinner sun4i low res adc attached tablet keys driver -+ * -+ * Copyright (C) 2014 Hans de Goede -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+/* -+ * Allwinnner sunxi SoCs have a lradc which is specifically designed to have -+ * various (tablet) keys (ie home, back, search, etc). attached to it using -+ * a resistor network. This driver is for the keys on such boards. -+ * -+ * There are 2 channels, currently this driver only supports chan0 since there -+ * are no boards known to use chan1. The devicetree properties are already -+ * prefixed with chan0 as preparation for chan1 support in the future. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define LRADC_CTRL 0x00 -+#define LRADC_INTC 0x04 -+#define LRADC_INTS 0x08 -+#define LRADC_DATA0 0x0c -+#define LRADC_DATA1 0x10 -+ -+/* LRADC_CTRL bits */ -+#define FIRST_CONVERT_DLY(x) ((x) << 24) /* 8 bits */ -+#define CHAN_SELECT(x) ((x) << 22) /* 2 bits */ -+#define CONTINUE_TIME_SEL(x) ((x) << 16) /* 4 bits */ -+#define KEY_MODE_SEL(x) ((x) << 12) /* 2 bits */ -+#define LEVELA_B_CNT(x) ((x) << 8) /* 4 bits */ -+#define HOLD_EN(x) ((x) << 6) -+#define LEVELB_VOL(x) ((x) << 4) /* 2 bits */ -+#define SAMPLE_RATE(x) ((x) << 2) /* 2 bits */ -+#define ENABLE(x) ((x) << 0) -+ -+/* LRADC_INTC and LRADC_INTS bits */ -+#define CHAN1_KEYUP_IRQ BIT(12) -+#define CHAN1_ALRDY_HOLD_IRQ BIT(11) -+#define CHAN1_HOLD_IRQ BIT(10) -+#define CHAN1_KEYDOWN_IRQ BIT(9) -+#define CHAN1_DATA_IRQ BIT(8) -+#define CHAN0_KEYUP_IRQ BIT(4) -+#define CHAN0_ALRDY_HOLD_IRQ BIT(3) -+#define CHAN0_HOLD_IRQ BIT(2) -+#define CHAN0_KEYDOWN_IRQ BIT(1) -+#define CHAN0_DATA_IRQ BIT(0) -+ -+#define MAX_KEYS 13 -+ -+/* Lookup table to map the adc val to a keycode index for 150 mv step size */ -+static const u8 adc_val_to_key_index_step150[64] = { -+ 0, 0, 0, -+ 1, 1, 1, 1, 1, -+ 2, 2, 2, 2, 2, -+ 3, 3, 3, 3, -+ 4, 4, 4, 4, 4, -+ 5, 5, 5, 5, 5, -+ 6, 6, 6, 6, 6, -+ 7, 7, 7, 7, -+ 8, 8, 8, 8, 8, -+ 9, 9, 9, 9, 9, -+ 10, 10, 10, 10, -+ 11, 11, 11, 11, -+ 12, 12, 12, 12, 12, 12, 12, 12, 12, 12 -+}; -+ -+/* Lookup table to map the adc val to a keycode index for 200 mv step size */ -+static const u8 adc_val_to_key_index_step200[64] = { -+ 0, 0, 0, 0, 0, 0, 0, 0, -+ 1, 1, 1, 1, 1, 1, 1, -+ 2, 2, 2, 2, 2, 2, 2, -+ 3, 3, 3, 3, 3, 3, -+ 4, 4, 4, 4, 4, 4, -+ 5, 5, 5, 5, 5, 5, -+ 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, -+ 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 -+}; -+ -+struct sun4i_lradc_data { -+ struct device *dev; -+ struct input_dev *input; -+ void __iomem *base; -+ u32 chan0_step; -+ u32 chan0_keycode; -+ u32 chan0_keycodes[MAX_KEYS]; -+}; -+ -+static irqreturn_t sun4i_lradc_irq(int irq, void *dev_id) -+{ -+ struct sun4i_lradc_data *lradc = dev_id; -+ u32 ints, val; -+ -+ ints = readl(lradc->base + LRADC_INTS); -+ -+ /* -+ * lradc supports only one keypress at a time, release does not give -+ * any info as to which key was released, so we cache the keycode. -+ */ -+ if ((ints & CHAN0_KEYDOWN_IRQ) && lradc->chan0_keycode == 0) { -+ val = readl(lradc->base + LRADC_DATA0); -+ if (lradc->chan0_step == 150) -+ val = adc_val_to_key_index_step150[val]; -+ else -+ val = adc_val_to_key_index_step200[val]; -+ -+ lradc->chan0_keycode = lradc->chan0_keycodes[val]; -+ input_report_key(lradc->input, lradc->chan0_keycode, 1); -+ } -+ -+ if (ints & CHAN0_KEYUP_IRQ) { -+ input_report_key(lradc->input, lradc->chan0_keycode, 0); -+ lradc->chan0_keycode = 0; -+ } -+ -+ input_sync(lradc->input); -+ -+ writel(ints, lradc->base + LRADC_INTS); -+ -+ return IRQ_HANDLED; -+} -+ -+static int sun4i_lradc_open(struct input_dev *dev) -+{ -+ struct sun4i_lradc_data *lradc = input_get_drvdata(dev); -+ -+ /* -+ * Set sample time to 16 ms / 62.5 Hz. Wait 2 * 16 ms for key to -+ * stabilize on press, wait (1 + 1) * 16 ms for key release -+ */ -+ writel(FIRST_CONVERT_DLY(2) | LEVELA_B_CNT(1) | HOLD_EN(1) | -+ SAMPLE_RATE(2) | ENABLE(1), lradc->base + LRADC_CTRL); -+ -+ writel(CHAN0_KEYUP_IRQ | CHAN0_KEYDOWN_IRQ, lradc->base + LRADC_INTC); -+ -+ return 0; -+} -+ -+static void sun4i_lradc_close(struct input_dev *dev) -+{ -+ struct sun4i_lradc_data *lradc = input_get_drvdata(dev); -+ -+ /* Disable lradc, leave other settings unchanged */ -+ writel(FIRST_CONVERT_DLY(2) | LEVELA_B_CNT(1) | HOLD_EN(1) | -+ SAMPLE_RATE(2), lradc->base + LRADC_CTRL); -+ writel(0, lradc->base + LRADC_INTC); -+} -+ -+static int sun4i_lradc_probe(struct platform_device *pdev) -+{ -+ struct sun4i_lradc_data *lradc; -+ struct device *dev = &pdev->dev; -+ struct device_node *np = dev->of_node; -+ int i, ret; -+ -+ lradc = devm_kzalloc(dev, sizeof(struct sun4i_lradc_data), GFP_KERNEL); -+ if (!lradc) -+ return -ENOMEM; -+ -+ ret = of_property_read_u32(np, "allwinner,chan0-step", -+ &lradc->chan0_step); -+ if (ret || (lradc->chan0_step != 150 && lradc->chan0_step != 200)) { -+ dev_err(dev, "Invalid allwinner,chan0-step dt-property\n"); -+ return -EINVAL; -+ } -+ -+ for (i = 0; i < MAX_KEYS; i++) -+ of_property_read_u32_index(np, "linux,chan0-keycodes", -+ i, &lradc->chan0_keycodes[i]); -+ -+ lradc->dev = dev; -+ lradc->input = devm_input_allocate_device(dev); -+ if (!lradc->input) -+ return -ENOMEM; -+ -+ lradc->input->name = pdev->name; -+ lradc->input->phys = "sun4i_lradc/input0"; -+ lradc->input->open = sun4i_lradc_open; -+ lradc->input->close = sun4i_lradc_close; -+ lradc->input->id.bustype = BUS_HOST; -+ lradc->input->id.vendor = 0x0001; -+ lradc->input->id.product = 0x0001; -+ lradc->input->id.version = 0x0100; -+ lradc->input->evbit[0] = BIT(EV_SYN) | BIT(EV_KEY); -+ for (i = 0; i < MAX_KEYS; i++) -+ set_bit(lradc->chan0_keycodes[i], lradc->input->keybit); -+ input_set_drvdata(lradc->input, lradc); -+ -+ lradc->base = devm_ioremap_resource(dev, -+ platform_get_resource(pdev, IORESOURCE_MEM, 0)); -+ if (IS_ERR(lradc->base)) -+ return PTR_ERR(lradc->base); -+ -+ ret = devm_request_irq(dev, platform_get_irq(pdev, 0), sun4i_lradc_irq, -+ 0, "sun4i-lradc-keys", lradc); -+ if (ret) -+ return ret; -+ -+ ret = input_register_device(lradc->input); -+ if (ret) -+ return ret; -+ -+ platform_set_drvdata(pdev, lradc); -+ return 0; -+} -+ -+static const struct of_device_id sun4i_lradc_of_match[] = { -+ { .compatible = "allwinner,sun4i-lradc-keys", }, -+ { /* sentinel */ } -+}; -+MODULE_DEVICE_TABLE(of, sun4i_lradc_of_match); -+ -+static struct platform_driver sun4i_lradc_driver = { -+ .driver = { -+ .owner = THIS_MODULE, -+ .name = "sun4i-lradc-keys", -+ .of_match_table = of_match_ptr(sun4i_lradc_of_match), -+ }, -+ .probe = sun4i_lradc_probe, -+}; -+ -+module_platform_driver(sun4i_lradc_driver); -+ -+MODULE_DESCRIPTION("Allwinner sun4i low res adc attached tablet keys driver"); -+MODULE_AUTHOR("Hans de Goede "); -+MODULE_LICENSE("GPL"); --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/176-1-dt-sun7i-add-lradc.patch b/target/linux/sunxi/patches-3.13/176-1-dt-sun7i-add-lradc.patch deleted file mode 100644 index f23ad66409..0000000000 --- a/target/linux/sunxi/patches-3.13/176-1-dt-sun7i-add-lradc.patch +++ /dev/null @@ -1,59 +0,0 @@ -From 0b35a283be3dcd9495bb7c0e13ef2cd58a5d2afc Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Wed, 1 Jan 2014 20:26:21 +0100 -Subject: [PATCH] ARM: dts: sun7i: Add lradc node - -Signed-off-by: Hans de Goede ---- - arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 9 +++++++++ - arch/arm/boot/dts/sun7i-a20.dtsi | 7 +++++++ - 2 files changed, 16 insertions(+) - -diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts -index d4e2355..aef289f 100644 ---- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts -+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts -@@ -14,6 +14,7 @@ - /dts-v1/; - /include/ "sun7i-a20.dtsi" - /include/ "sunxi-ahci-reg.dtsi" -+#include - - / { - model = "Olimex A20-Olinuxino Micro"; -@@ -57,6 +58,14 @@ - }; - }; - -+ lradc: lradc@01c22800 { -+ allwinner,chan0-step = <200>; -+ linux,chan0-keycodes = ; -+ status = "okay"; -+ }; -+ - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; -diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi -index fa2ef07..b58ce25 100644 ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -608,6 +608,13 @@ - interrupts = <0 24 1>; - }; - -+ lradc: lradc@01c22800 { -+ compatible = "allwinner,sun4i-lradc-keys"; -+ reg = <0x01c22800 0x100>; -+ interrupts = <0 31 4>; -+ status = "disabled"; -+ }; -+ - sid: eeprom@01c23800 { - compatible = "allwinner,sun7i-a20-sid"; - reg = <0x01c23800 0x200>; --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/176-2-dt-sun4i-add-lradc.patch b/target/linux/sunxi/patches-3.13/176-2-dt-sun4i-add-lradc.patch deleted file mode 100644 index 9183d9cfa6..0000000000 --- a/target/linux/sunxi/patches-3.13/176-2-dt-sun4i-add-lradc.patch +++ /dev/null @@ -1,31 +0,0 @@ -From 7d6d16c0c9b96695cd0f5e5845ac192209f0811d Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Wed, 1 Jan 2014 19:51:36 +0100 -Subject: [PATCH] ARM: dts: sun4i: Add lradc node - -Signed-off-by: Hans de Goede ---- - arch/arm/boot/dts/sun4i-a10.dtsi | 7 +++++++ - 1 file changed, 7 insertions(+) - -diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi -index ba05e6e..1a9ab7e 100644 ---- a/arch/arm/boot/dts/sun4i-a10.dtsi -+++ b/arch/arm/boot/dts/sun4i-a10.dtsi -@@ -494,6 +494,13 @@ - interrupts = <24>; - }; - -+ lradc: lradc@01c22800 { -+ compatible = "allwinner,sun4i-lradc-keys"; -+ reg = <0x01c22800 0x100>; -+ interrupts = <31>; -+ status = "disabled"; -+ }; -+ - sid: eeprom@01c23800 { - compatible = "allwinner,sun4i-sid"; - reg = <0x01c23800 0x10>; --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/176-3-dt-sun5i-add-lradc.patch b/target/linux/sunxi/patches-3.13/176-3-dt-sun5i-add-lradc.patch deleted file mode 100644 index c73b52b049..0000000000 --- a/target/linux/sunxi/patches-3.13/176-3-dt-sun5i-add-lradc.patch +++ /dev/null @@ -1,104 +0,0 @@ -From 23f834fe6efd9f97e9b336cc53d902e6a0158cc5 Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Wed, 1 Jan 2014 19:50:33 +0100 -Subject: [PATCH] ARM: dts: sun5i: Add lradc node - -Signed-off-by: Hans de Goede ---- - arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 8 ++++++++ - arch/arm/boot/dts/sun5i-a10s.dtsi | 7 +++++++ - arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 8 ++++++++ - arch/arm/boot/dts/sun5i-a13.dtsi | 7 +++++++ - 4 files changed, 30 insertions(+) - -diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts -index 5c7b454..2cbca7b 100644 ---- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts -+++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts -@@ -13,6 +13,7 @@ - - /dts-v1/; - /include/ "sun5i-a10s.dtsi" -+#include - - / { - model = "Olimex A10s-Olinuxino Micro"; -@@ -73,6 +74,13 @@ - }; - }; - -+ lradc: lradc@01c22800 { -+ allwinner,chan0-step = <200>; -+ linux,chan0-keycodes = ; -+ status = "okay"; -+ }; -+ - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; -diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi -index 15dfa9a..95cb245 100644 ---- a/arch/arm/boot/dts/sun5i-a10s.dtsi -+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi -@@ -430,6 +430,13 @@ - reg = <0x01c20c90 0x10>; - }; - -+ lradc: lradc@01c22800 { -+ compatible = "allwinner,sun4i-lradc-keys"; -+ reg = <0x01c22800 0x100>; -+ interrupts = <31>; -+ status = "disabled"; -+ }; -+ - sid: eeprom@01c23800 { - compatible = "allwinner,sun4i-sid"; - reg = <0x01c23800 0x10>; -diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts -index a7280f5..ba32a41 100644 ---- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts -+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts -@@ -13,6 +13,7 @@ - - /dts-v1/; - /include/ "sun5i-a13.dtsi" -+#include - - / { - model = "Olimex A13-Olinuxino"; -@@ -43,6 +44,13 @@ - }; - }; - -+ lradc: lradc@01c22800 { -+ allwinner,chan0-step = <200>; -+ linux,chan0-keycodes = ; -+ status = "okay"; -+ }; -+ - uart1: serial@01c28400 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>; -diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi -index 14a99d0..bae0f5f 100644 ---- a/arch/arm/boot/dts/sun5i-a13.dtsi -+++ b/arch/arm/boot/dts/sun5i-a13.dtsi -@@ -376,6 +376,13 @@ - reg = <0x01c20c90 0x10>; - }; - -+ lradc: lradc@01c22800 { -+ compatible = "allwinner,sun4i-lradc-keys"; -+ reg = <0x01c22800 0x100>; -+ interrupts = <31>; -+ status = "disabled"; -+ }; -+ - sid: eeprom@01c23800 { - compatible = "allwinner,sun4i-sid"; - reg = <0x01c23800 0x10>; --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/180-0-usb-backport-device_wakeup_enable.patch b/target/linux/sunxi/patches-3.13/180-0-usb-backport-device_wakeup_enable.patch deleted file mode 100644 index 5ae391a248..0000000000 --- a/target/linux/sunxi/patches-3.13/180-0-usb-backport-device_wakeup_enable.patch +++ /dev/null @@ -1,896 +0,0 @@ -From 3c9740a117d40a74412775b5d3fe2b88a7635a0e Mon Sep 17 00:00:00 2001 -From: Peter Chen -Date: Tue, 5 Nov 2013 10:46:02 +0800 -Subject: [PATCH] usb: hcd: move controller wakeup setting initialization to - individual driver - -Individual controller driver has different requirement for wakeup -setting, so move it from core to itself. In order to align with -current etting the default wakeup setting is enabled (except for -chipidea host). - -Pass compile test with below commands: - make O=outout/all allmodconfig - make -j$CPU_NUM O=outout/all drivers/usb - -Signed-off-by: Peter Chen -Acked-by: Alan Stern -Signed-off-by: Greg Kroah-Hartman ---- - drivers/staging/dwc2/hcd.c | 2 ++ - drivers/staging/octeon-usb/octeon-hcd.c | 1 + - drivers/staging/ozwpan/ozhcd.c | 2 ++ - drivers/usb/c67x00/c67x00-hcd.c | 2 ++ - drivers/usb/core/hcd-pci.c | 1 + - drivers/usb/core/hcd.c | 6 ------ - drivers/usb/host/ehci-atmel.c | 1 + - drivers/usb/host/ehci-exynos.c | 1 + - drivers/usb/host/ehci-fsl.c | 1 + - drivers/usb/host/ehci-grlib.c | 1 + - drivers/usb/host/ehci-mv.c | 1 + - drivers/usb/host/ehci-mxc.c | 1 + - drivers/usb/host/ehci-octeon.c | 1 + - drivers/usb/host/ehci-omap.c | 1 + - drivers/usb/host/ehci-orion.c | 1 + - drivers/usb/host/ehci-platform.c | 1 + - drivers/usb/host/ehci-pmcmsp.c | 4 +++- - drivers/usb/host/ehci-ppc-of.c | 1 + - drivers/usb/host/ehci-ps3.c | 1 + - drivers/usb/host/ehci-sead3.c | 1 + - drivers/usb/host/ehci-sh.c | 1 + - drivers/usb/host/ehci-spear.c | 1 + - drivers/usb/host/ehci-tegra.c | 1 + - drivers/usb/host/ehci-tilegx.c | 1 + - drivers/usb/host/ehci-w90x900.c | 1 + - drivers/usb/host/ehci-xilinx-of.c | 4 +++- - drivers/usb/host/fhci-hcd.c | 2 ++ - drivers/usb/host/fotg210-hcd.c | 1 + - drivers/usb/host/fusbh200-hcd.c | 1 + - drivers/usb/host/hwa-hc.c | 1 + - drivers/usb/host/imx21-hcd.c | 1 + - drivers/usb/host/isp116x-hcd.c | 2 ++ - drivers/usb/host/isp1362-hcd.c | 2 ++ - drivers/usb/host/isp1760-hcd.c | 1 + - drivers/usb/host/ohci-at91.c | 4 +++- - drivers/usb/host/ohci-da8xx.c | 2 ++ - drivers/usb/host/ohci-exynos.c | 1 + - drivers/usb/host/ohci-jz4740.c | 1 + - drivers/usb/host/ohci-nxp.c | 4 +++- - drivers/usb/host/ohci-octeon.c | 2 ++ - drivers/usb/host/ohci-omap.c | 1 + - drivers/usb/host/ohci-omap3.c | 1 + - drivers/usb/host/ohci-platform.c | 2 ++ - drivers/usb/host/ohci-ppc-of.c | 4 +++- - drivers/usb/host/ohci-ps3.c | 1 + - drivers/usb/host/ohci-pxa27x.c | 4 +++- - drivers/usb/host/ohci-s3c2410.c | 1 + - drivers/usb/host/ohci-sa1111.c | 4 +++- - drivers/usb/host/ohci-sm501.c | 1 + - drivers/usb/host/ohci-spear.c | 4 +++- - drivers/usb/host/ohci-tilegx.c | 1 + - drivers/usb/host/ohci-tmio.c | 1 + - drivers/usb/host/oxu210hp-hcd.c | 1 + - drivers/usb/host/r8a66597-hcd.c | 1 + - drivers/usb/host/sl811-hcd.c | 2 ++ - drivers/usb/host/u132-hcd.c | 1 + - drivers/usb/host/uhci-grlib.c | 1 + - drivers/usb/host/uhci-platform.c | 1 + - drivers/usb/host/whci/hcd.c | 1 + - drivers/usb/host/xhci-plat.c | 1 + - drivers/usb/musb/musb_host.c | 1 + - drivers/usb/phy/phy-msm-usb.c | 1 + - drivers/usb/phy/phy-mv-usb.c | 6 ++++-- - drivers/usb/renesas_usbhs/mod_host.c | 1 + - 64 files changed, 92 insertions(+), 16 deletions(-) - -diff --git a/drivers/staging/dwc2/hcd.c b/drivers/staging/dwc2/hcd.c -index 3cfd2d5..078cd91 100644 ---- a/drivers/staging/dwc2/hcd.c -+++ b/drivers/staging/dwc2/hcd.c -@@ -2921,6 +2921,8 @@ int dwc2_hcd_init(struct dwc2_hsotg *hsotg, int irq, - if (retval < 0) - goto error3; - -+ device_wakeup_enable(hcd->self.controller); -+ - dwc2_hcd_dump_state(hsotg); - - dwc2_enable_global_interrupts(hsotg); -diff --git a/drivers/staging/octeon-usb/octeon-hcd.c b/drivers/staging/octeon-usb/octeon-hcd.c -index d118952..47e0a91 100644 ---- a/drivers/staging/octeon-usb/octeon-hcd.c -+++ b/drivers/staging/octeon-usb/octeon-hcd.c -@@ -3498,6 +3498,7 @@ static int octeon_usb_driver_probe(struct device *dev) - kfree(hcd); - return -1; - } -+ device_wakeup_enable(hcd->self.controller); - - dev_dbg(dev, "Registered HCD for port %d on irq %d\n", usb_num, irq); - -diff --git a/drivers/staging/ozwpan/ozhcd.c b/drivers/staging/ozwpan/ozhcd.c -index d9c43c3..efaf26f 100644 ---- a/drivers/staging/ozwpan/ozhcd.c -+++ b/drivers/staging/ozwpan/ozhcd.c -@@ -2270,6 +2270,8 @@ static int oz_plat_probe(struct platform_device *dev) - usb_put_hcd(hcd); - return -1; - } -+ device_wakeup_enable(hcd->self.controller); -+ - spin_lock_bh(&g_hcdlock); - g_ozhcd = ozhcd; - spin_unlock_bh(&g_hcdlock); -diff --git a/drivers/usb/c67x00/c67x00-hcd.c b/drivers/usb/c67x00/c67x00-hcd.c -index 75e47b8..20ec4ee 100644 ---- a/drivers/usb/c67x00/c67x00-hcd.c -+++ b/drivers/usb/c67x00/c67x00-hcd.c -@@ -384,6 +384,8 @@ int c67x00_hcd_probe(struct c67x00_sie *sie) - goto err2; - } - -+ device_wakeup_enable(hcd->self.controller); -+ - spin_lock_irqsave(&sie->lock, flags); - sie->private_data = c67x00; - sie->irq = c67x00_hcd_irq; -diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c -index dfe9d0f..d59d993 100644 ---- a/drivers/usb/core/hcd-pci.c -+++ b/drivers/usb/core/hcd-pci.c -@@ -282,6 +282,7 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) - - if (retval != 0) - goto unmap_registers; -+ device_wakeup_enable(hcd->self.controller); - - if (pci_dev_run_wake(dev)) - pm_runtime_put_noidle(&dev->dev); -diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c -index d3a9bcd..6297c9e 100644 ---- a/drivers/usb/core/hcd.c -+++ b/drivers/usb/core/hcd.c -@@ -2712,12 +2712,6 @@ int usb_add_hcd(struct usb_hcd *hcd, - if (hcd->uses_new_polling && HCD_POLL_RH(hcd)) - usb_hcd_poll_rh_status(hcd); - -- /* -- * Host controllers don't generate their own wakeup requests; -- * they only forward requests from the root hub. Therefore -- * controllers should always be enabled for remote wakeup. -- */ -- device_wakeup_enable(hcd->self.controller); - return retval; - - error_create_attr_group: -diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c -index 284f841..ec9f7b7 100644 ---- a/drivers/usb/host/ehci-atmel.c -+++ b/drivers/usb/host/ehci-atmel.c -@@ -153,6 +153,7 @@ static int ehci_atmel_drv_probe(struct platform_device *pdev) - retval = usb_add_hcd(hcd, irq, IRQF_SHARED); - if (retval) - goto fail_add_hcd; -+ device_wakeup_enable(hcd->self.controller); - - return retval; - -diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c -index e97c198..d1d8c47 100644 ---- a/drivers/usb/host/ehci-exynos.c -+++ b/drivers/usb/host/ehci-exynos.c -@@ -166,6 +166,7 @@ static int exynos_ehci_probe(struct platform_device *pdev) - dev_err(&pdev->dev, "Failed to add USB HCD\n"); - goto fail_add_hcd; - } -+ device_wakeup_enable(hcd->self.controller); - - platform_set_drvdata(pdev, hcd); - -diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c -index 87a7426..854a68f 100644 ---- a/drivers/usb/host/ehci-fsl.c -+++ b/drivers/usb/host/ehci-fsl.c -@@ -138,6 +138,7 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver, - retval = usb_add_hcd(hcd, irq, IRQF_SHARED); - if (retval != 0) - goto err4; -+ device_wakeup_enable(hcd->self.controller); - - #ifdef CONFIG_USB_OTG - if (pdata->operating_mode == FSL_USB2_DR_OTG) { -diff --git a/drivers/usb/host/ehci-grlib.c b/drivers/usb/host/ehci-grlib.c -index b52a66c..054792c 100644 ---- a/drivers/usb/host/ehci-grlib.c -+++ b/drivers/usb/host/ehci-grlib.c -@@ -140,6 +140,7 @@ static int ehci_hcd_grlib_probe(struct platform_device *op) - if (rv) - goto err_ioremap; - -+ device_wakeup_enable(hcd->self.controller); - return 0; - - err_ioremap: -diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c -index 6e8afca..bd61612 100644 ---- a/drivers/usb/host/ehci-mv.c -+++ b/drivers/usb/host/ehci-mv.c -@@ -257,6 +257,7 @@ static int mv_ehci_probe(struct platform_device *pdev) - "failed to add hcd with err %d\n", retval); - goto err_set_vbus; - } -+ device_wakeup_enable(hcd->self.controller); - } - - if (pdata->private_init) -diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c -index 0528dc4..dbe5e4e 100644 ---- a/drivers/usb/host/ehci-mxc.c -+++ b/drivers/usb/host/ehci-mxc.c -@@ -155,6 +155,7 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) - if (ret) - goto err_add; - -+ device_wakeup_enable(hcd->self.controller); - return 0; - - err_add: -diff --git a/drivers/usb/host/ehci-octeon.c b/drivers/usb/host/ehci-octeon.c -index 4c528b2..c4ad7ed 100644 ---- a/drivers/usb/host/ehci-octeon.c -+++ b/drivers/usb/host/ehci-octeon.c -@@ -158,6 +158,7 @@ static int ehci_octeon_drv_probe(struct platform_device *pdev) - dev_dbg(&pdev->dev, "failed to add hcd with err %d\n", ret); - goto err3; - } -+ device_wakeup_enable(hcd->self.controller); - - platform_set_drvdata(pdev, hcd); - -diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c -index 6fa82d6..a24720b 100644 ---- a/drivers/usb/host/ehci-omap.c -+++ b/drivers/usb/host/ehci-omap.c -@@ -215,6 +215,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) - dev_err(dev, "failed to add hcd with err %d\n", ret); - goto err_pm_runtime; - } -+ device_wakeup_enable(hcd->self.controller); - - /* - * Bring PHYs out of reset for non PHY modes. -diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c -index 2ba7673..aa8b92b 100644 ---- a/drivers/usb/host/ehci-orion.c -+++ b/drivers/usb/host/ehci-orion.c -@@ -252,6 +252,7 @@ static int ehci_orion_drv_probe(struct platform_device *pdev) - if (err) - goto err4; - -+ device_wakeup_enable(hcd->self.controller); - return 0; - - err4: -diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c -index 7f30b71..01536cf 100644 ---- a/drivers/usb/host/ehci-platform.c -+++ b/drivers/usb/host/ehci-platform.c -@@ -132,6 +132,7 @@ static int ehci_platform_probe(struct platform_device *dev) - if (err) - goto err_put_hcd; - -+ device_wakeup_enable(hcd->self.controller); - platform_set_drvdata(dev, hcd); - - return err; -diff --git a/drivers/usb/host/ehci-pmcmsp.c b/drivers/usb/host/ehci-pmcmsp.c -index 893b707f..af3974a 100644 ---- a/drivers/usb/host/ehci-pmcmsp.c -+++ b/drivers/usb/host/ehci-pmcmsp.c -@@ -210,8 +210,10 @@ int usb_hcd_msp_probe(const struct hc_driver *driver, - - - retval = usb_add_hcd(hcd, res->start, IRQF_SHARED); -- if (retval == 0) -+ if (retval == 0) { -+ device_wakeup_enable(hcd->self.controller); - return 0; -+ } - - usb_remove_hcd(hcd); - err3: -diff --git a/drivers/usb/host/ehci-ppc-of.c b/drivers/usb/host/ehci-ppc-of.c -index 875d2fc..b0965eb 100644 ---- a/drivers/usb/host/ehci-ppc-of.c -+++ b/drivers/usb/host/ehci-ppc-of.c -@@ -169,6 +169,7 @@ static int ehci_hcd_ppc_of_probe(struct platform_device *op) - if (rv) - goto err_ioremap; - -+ device_wakeup_enable(hcd->self.controller); - return 0; - - err_ioremap: -diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c -index 8188542..7934ff9 100644 ---- a/drivers/usb/host/ehci-ps3.c -+++ b/drivers/usb/host/ehci-ps3.c -@@ -189,6 +189,7 @@ static int ps3_ehci_probe(struct ps3_system_bus_device *dev) - goto fail_add_hcd; - } - -+ device_wakeup_enable(hcd->self.controller); - return result; - - fail_add_hcd: -diff --git a/drivers/usb/host/ehci-sead3.c b/drivers/usb/host/ehci-sead3.c -index 8a73449..cf12676 100644 ---- a/drivers/usb/host/ehci-sead3.c -+++ b/drivers/usb/host/ehci-sead3.c -@@ -126,6 +126,7 @@ static int ehci_hcd_sead3_drv_probe(struct platform_device *pdev) - IRQF_SHARED); - if (ret == 0) { - platform_set_drvdata(pdev, hcd); -+ device_wakeup_enable(hcd->self.controller); - return ret; - } - -diff --git a/drivers/usb/host/ehci-sh.c b/drivers/usb/host/ehci-sh.c -index dc899eb..9b9b9f5 100644 ---- a/drivers/usb/host/ehci-sh.c -+++ b/drivers/usb/host/ehci-sh.c -@@ -151,6 +151,7 @@ static int ehci_hcd_sh_probe(struct platform_device *pdev) - dev_err(&pdev->dev, "Failed to add hcd"); - goto fail_add_hcd; - } -+ device_wakeup_enable(hcd->self.controller); - - priv->hcd = hcd; - platform_set_drvdata(pdev, priv); -diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c -index ee6f9ff..8bd915b 100644 ---- a/drivers/usb/host/ehci-spear.c -+++ b/drivers/usb/host/ehci-spear.c -@@ -130,6 +130,7 @@ static int spear_ehci_hcd_drv_probe(struct platform_device *pdev) - if (retval) - goto err_stop_ehci; - -+ device_wakeup_enable(hcd->self.controller); - return retval; - - err_stop_ehci: -diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c -index b9fd039..a8f4471 100644 ---- a/drivers/usb/host/ehci-tegra.c -+++ b/drivers/usb/host/ehci-tegra.c -@@ -455,6 +455,7 @@ static int tegra_ehci_probe(struct platform_device *pdev) - dev_err(&pdev->dev, "Failed to add USB HCD\n"); - goto cleanup_otg_set_host; - } -+ device_wakeup_enable(hcd->self.controller); - - return err; - -diff --git a/drivers/usb/host/ehci-tilegx.c b/drivers/usb/host/ehci-tilegx.c -index 67026ff..f3713d3 100644 ---- a/drivers/usb/host/ehci-tilegx.c -+++ b/drivers/usb/host/ehci-tilegx.c -@@ -170,6 +170,7 @@ static int ehci_hcd_tilegx_drv_probe(struct platform_device *pdev) - ret = usb_add_hcd(hcd, pdata->irq, IRQF_SHARED); - if (ret == 0) { - platform_set_drvdata(pdev, hcd); -+ device_wakeup_enable(hcd->self.controller); - return ret; - } - -diff --git a/drivers/usb/host/ehci-w90x900.c b/drivers/usb/host/ehci-w90x900.c -index cdad843..12c1a56 100644 ---- a/drivers/usb/host/ehci-w90x900.c -+++ b/drivers/usb/host/ehci-w90x900.c -@@ -94,6 +94,7 @@ static int usb_w90x900_probe(const struct hc_driver *driver, - if (retval != 0) - goto err4; - -+ device_wakeup_enable(hcd->self.controller); - return retval; - err4: - iounmap(hcd->regs); -diff --git a/drivers/usb/host/ehci-xilinx-of.c b/drivers/usb/host/ehci-xilinx-of.c -index 95979f9..3cd2efa 100644 ---- a/drivers/usb/host/ehci-xilinx-of.c -+++ b/drivers/usb/host/ehci-xilinx-of.c -@@ -191,8 +191,10 @@ static int ehci_hcd_xilinx_of_probe(struct platform_device *op) - ehci->caps = hcd->regs + 0x100; - - rv = usb_add_hcd(hcd, irq, 0); -- if (rv == 0) -+ if (rv == 0) { -+ device_wakeup_enable(hcd->self.controller); - return 0; -+ } - - err_irq: - usb_put_hcd(hcd); -diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c -index 0551c0a..1cf68ea 100644 ---- a/drivers/usb/host/fhci-hcd.c -+++ b/drivers/usb/host/fhci-hcd.c -@@ -754,6 +754,8 @@ static int of_fhci_probe(struct platform_device *ofdev) - if (ret < 0) - goto err_add_hcd; - -+ device_wakeup_enable(hcd->self.controller); -+ - fhci_dfs_create(fhci); - - return 0; -diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c -index 97d6939..98a89d1 100644 ---- a/drivers/usb/host/fotg210-hcd.c -+++ b/drivers/usb/host/fotg210-hcd.c -@@ -5889,6 +5889,7 @@ static int fotg210_hcd_probe(struct platform_device *pdev) - dev_err(dev, "failed to add hcd with err %d\n", retval); - goto fail_add_hcd; - } -+ device_wakeup_enable(hcd->self.controller); - - return retval; - -diff --git a/drivers/usb/host/fusbh200-hcd.c b/drivers/usb/host/fusbh200-hcd.c -index 9ea85b6..ba94990 100644 ---- a/drivers/usb/host/fusbh200-hcd.c -+++ b/drivers/usb/host/fusbh200-hcd.c -@@ -5798,6 +5798,7 @@ static int fusbh200_hcd_probe(struct platform_device *pdev) - dev_err(dev, "failed to add hcd with err %d\n", retval); - goto fail_add_hcd; - } -+ device_wakeup_enable(hcd->self.controller); - - return retval; - -diff --git a/drivers/usb/host/hwa-hc.c b/drivers/usb/host/hwa-hc.c -index a4ec9e6..7fd3f9b 100644 ---- a/drivers/usb/host/hwa-hc.c -+++ b/drivers/usb/host/hwa-hc.c -@@ -791,6 +791,7 @@ static int hwahc_probe(struct usb_interface *usb_iface, - dev_err(dev, "Cannot add HCD: %d\n", result); - goto error_add_hcd; - } -+ device_wakeup_enable(usb_hcd->self.controller); - result = wusbhc_b_create(&hwahc->wusbhc); - if (result < 0) { - dev_err(dev, "Cannot setup phase B of WUSBHC: %d\n", result); -diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c -index 0122624..207bad9 100644 ---- a/drivers/usb/host/imx21-hcd.c -+++ b/drivers/usb/host/imx21-hcd.c -@@ -1910,6 +1910,7 @@ static int imx21_probe(struct platform_device *pdev) - dev_err(imx21->dev, "usb_add_hcd() returned %d\n", ret); - goto failed_add_hcd; - } -+ device_wakeup_enable(hcd->self.controller); - - return 0; - -diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c -index 7722ec6..2740f65 100644 ---- a/drivers/usb/host/isp116x-hcd.c -+++ b/drivers/usb/host/isp116x-hcd.c -@@ -1645,6 +1645,8 @@ static int isp116x_probe(struct platform_device *pdev) - if (ret) - goto err6; - -+ device_wakeup_enable(hcd->self.controller); -+ - ret = create_debug_file(isp116x); - if (ret) { - ERR("Couldn't create debugfs entry\n"); -diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c -index cd94b10..34645ae 100644 ---- a/drivers/usb/host/isp1362-hcd.c -+++ b/drivers/usb/host/isp1362-hcd.c -@@ -2746,6 +2746,8 @@ static int isp1362_probe(struct platform_device *pdev) - retval = usb_add_hcd(hcd, irq, irq_flags | IRQF_SHARED); - if (retval != 0) - goto err6; -+ device_wakeup_enable(hcd->self.controller); -+ - pr_info("%s, irq %d\n", hcd->product_desc, irq); - - create_debug_file(isp1362_hcd); -diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c -index 2facee5..51a0ae9 100644 ---- a/drivers/usb/host/isp1760-hcd.c -+++ b/drivers/usb/host/isp1760-hcd.c -@@ -2250,6 +2250,7 @@ struct usb_hcd *isp1760_register(phys_addr_t res_start, resource_size_t res_len, - ret = usb_add_hcd(hcd, irq, irqflags); - if (ret) - goto err_unmap; -+ device_wakeup_enable(hcd->self.controller); - - return hcd; - -diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c -index cc9462f..29d2093 100644 -diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c -index 71dbd85..f0fe0d2 100644 ---- a/drivers/usb/host/ohci-da8xx.c -+++ b/drivers/usb/host/ohci-da8xx.c -@@ -348,6 +348,8 @@ static int usb_hcd_da8xx_probe(const struct hc_driver *driver, - if (error) - goto err4; - -+ device_wakeup_enable(hcd->self.controller); -+ - if (hub->ocic_notify) { - error = hub->ocic_notify(ohci_da8xx_ocic_handler); - if (!error) -diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c -index 9897d70..68588d8 100644 ---- a/drivers/usb/host/ohci-exynos.c -+++ b/drivers/usb/host/ohci-exynos.c -@@ -146,6 +146,7 @@ static int exynos_ohci_probe(struct platform_device *pdev) - dev_err(&pdev->dev, "Failed to add USB HCD\n"); - goto fail_add_hcd; - } -+ device_wakeup_enable(hcd->self.controller); - return 0; - - fail_add_hcd: -diff --git a/drivers/usb/host/ohci-jz4740.c b/drivers/usb/host/ohci-jz4740.c -index d4ef539..efe31f3 100644 ---- a/drivers/usb/host/ohci-jz4740.c -+++ b/drivers/usb/host/ohci-jz4740.c -@@ -217,6 +217,7 @@ static int jz4740_ohci_probe(struct platform_device *pdev) - dev_err(&pdev->dev, "Failed to add hcd: %d\n", ret); - goto err_disable; - } -+ device_wakeup_enable(hcd->self.controller); - - return 0; - -diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c -index e99db8a..719f28e 100644 ---- a/drivers/usb/host/ohci-nxp.c -+++ b/drivers/usb/host/ohci-nxp.c -@@ -274,8 +274,10 @@ static int ohci_hcd_nxp_probe(struct platform_device *pdev) - - dev_info(&pdev->dev, "at 0x%p, irq %d\n", hcd->regs, hcd->irq); - ret = usb_add_hcd(hcd, irq, 0); -- if (ret == 0) -+ if (ret == 0) { -+ device_wakeup_enable(hcd->self.controller); - return ret; -+ } - - ohci_nxp_stop_hc(); - fail_resource: -diff --git a/drivers/usb/host/ohci-octeon.c b/drivers/usb/host/ohci-octeon.c -index 6c16dce..49b220d 100644 ---- a/drivers/usb/host/ohci-octeon.c -+++ b/drivers/usb/host/ohci-octeon.c -@@ -171,6 +171,8 @@ static int ohci_octeon_drv_probe(struct platform_device *pdev) - goto err3; - } - -+ device_wakeup_enable(hcd->self.controller); -+ - platform_set_drvdata(pdev, hcd); - - return 0; -diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c -index f253214..a44a4fe 100644 ---- a/drivers/usb/host/ohci-omap.c -+++ b/drivers/usb/host/ohci-omap.c -@@ -367,6 +367,7 @@ static int usb_hcd_omap_probe (const struct hc_driver *driver, - if (retval) - goto err3; - -+ device_wakeup_enable(hcd->self.controller); - return 0; - err3: - iounmap(hcd->regs); -diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c -index 2145741..ec15aeb 100644 ---- a/drivers/usb/host/ohci-omap3.c -+++ b/drivers/usb/host/ohci-omap3.c -@@ -130,6 +130,7 @@ static int ohci_hcd_omap3_probe(struct platform_device *pdev) - dev_dbg(dev, "failed to add hcd with err %d\n", ret); - goto err_add_hcd; - } -+ device_wakeup_enable(hcd->self.controller); - - return 0; - -diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c -index f351ff5..68f674c 100644 ---- a/drivers/usb/host/ohci-platform.c -+++ b/drivers/usb/host/ohci-platform.c -@@ -108,6 +108,8 @@ static int ohci_platform_probe(struct platform_device *dev) - if (err) - goto err_put_hcd; - -+ device_wakeup_enable(hcd->self.controller); -+ - platform_set_drvdata(dev, hcd); - - return err; -diff --git a/drivers/usb/host/ohci-ppc-of.c b/drivers/usb/host/ohci-ppc-of.c -index 81f3eba..83e33d4 100644 ---- a/drivers/usb/host/ohci-ppc-of.c -+++ b/drivers/usb/host/ohci-ppc-of.c -@@ -147,8 +147,10 @@ static int ohci_hcd_ppc_of_probe(struct platform_device *op) - ohci_hcd_init(ohci); - - rv = usb_add_hcd(hcd, irq, 0); -- if (rv == 0) -+ if (rv == 0) { -+ device_wakeup_enable(hcd->self.controller); - return 0; -+ } - - /* by now, 440epx is known to show usb_23 erratum */ - np = of_find_compatible_node(NULL, NULL, "ibm,usb-ehci-440epx"); -diff --git a/drivers/usb/host/ohci-ps3.c b/drivers/usb/host/ohci-ps3.c -index 7d35cd9..71d8bc4 100644 ---- a/drivers/usb/host/ohci-ps3.c -+++ b/drivers/usb/host/ohci-ps3.c -@@ -173,6 +173,7 @@ static int ps3_ohci_probe(struct ps3_system_bus_device *dev) - goto fail_add_hcd; - } - -+ device_wakeup_enable(hcd->self.controller); - return result; - - fail_add_hcd: -diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c -index e89ac4d..5343ecf 100644 ---- a/drivers/usb/host/ohci-pxa27x.c -+++ b/drivers/usb/host/ohci-pxa27x.c -@@ -442,8 +442,10 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device - ohci->num_ports = 3; - - retval = usb_add_hcd(hcd, irq, 0); -- if (retval == 0) -+ if (retval == 0) { -+ device_wakeup_enable(hcd->self.controller); - return retval; -+ } - - pxa27x_stop_hc(pxa_ohci, &pdev->dev); - err3: -diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c -index 83cd1dc..ff7c8f1 100644 ---- a/drivers/usb/host/ohci-s3c2410.c -+++ b/drivers/usb/host/ohci-s3c2410.c -@@ -395,6 +395,7 @@ static int usb_hcd_s3c2410_probe(const struct hc_driver *driver, - if (retval != 0) - goto err_ioremap; - -+ device_wakeup_enable(hcd->self.controller); - return 0; - - err_ioremap: -diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c -index aa9e127..2ac266d 100644 ---- a/drivers/usb/host/ohci-sa1111.c -+++ b/drivers/usb/host/ohci-sa1111.c -@@ -211,8 +211,10 @@ static int ohci_hcd_sa1111_probe(struct sa1111_dev *dev) - goto err2; - - ret = usb_add_hcd(hcd, dev->irq[1], 0); -- if (ret == 0) -+ if (ret == 0) { -+ device_wakeup_enable(hcd->self.controller); - return ret; -+ } - - sa1111_stop_hc(dev); - err2: -diff --git a/drivers/usb/host/ohci-sm501.c b/drivers/usb/host/ohci-sm501.c -index 2a5de5f..4e81c80 100644 ---- a/drivers/usb/host/ohci-sm501.c -+++ b/drivers/usb/host/ohci-sm501.c -@@ -168,6 +168,7 @@ static int ohci_hcd_sm501_drv_probe(struct platform_device *pdev) - retval = usb_add_hcd(hcd, irq, IRQF_SHARED); - if (retval) - goto err5; -+ device_wakeup_enable(hcd->self.controller); - - /* enable power and unmask interrupts */ - -diff --git a/drivers/usb/host/ohci-spear.c b/drivers/usb/host/ohci-spear.c -index e418c19..4cb98ab 100644 ---- a/drivers/usb/host/ohci-spear.c -+++ b/drivers/usb/host/ohci-spear.c -@@ -103,8 +103,10 @@ static int spear_ohci_hcd_drv_probe(struct platform_device *pdev) - ohci = hcd_to_ohci(hcd); - - retval = usb_add_hcd(hcd, platform_get_irq(pdev, 0), 0); -- if (retval == 0) -+ if (retval == 0) { -+ device_wakeup_enable(hcd->self.controller); - return retval; -+ } - - clk_disable_unprepare(sohci_p->clk); - err_put_hcd: -diff --git a/drivers/usb/host/ohci-tilegx.c b/drivers/usb/host/ohci-tilegx.c -index 22540ab..0b183e0 100644 ---- a/drivers/usb/host/ohci-tilegx.c -+++ b/drivers/usb/host/ohci-tilegx.c -@@ -159,6 +159,7 @@ static int ohci_hcd_tilegx_drv_probe(struct platform_device *pdev) - ret = usb_add_hcd(hcd, pdata->irq, IRQF_SHARED); - if (ret == 0) { - platform_set_drvdata(pdev, hcd); -+ device_wakeup_enable(hcd->self.controller); - return ret; - } - -diff --git a/drivers/usb/host/ohci-tmio.c b/drivers/usb/host/ohci-tmio.c -index ecb09a5..9c44093 100644 ---- a/drivers/usb/host/ohci-tmio.c -+++ b/drivers/usb/host/ohci-tmio.c -@@ -250,6 +250,7 @@ static int ohci_hcd_tmio_drv_probe(struct platform_device *dev) - if (ret) - goto err_add_hcd; - -+ device_wakeup_enable(hcd->self.controller); - if (ret == 0) - return ret; - -diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c -index 4a05148..778eeaf 100644 ---- a/drivers/usb/host/oxu210hp-hcd.c -+++ b/drivers/usb/host/oxu210hp-hcd.c -@@ -3751,6 +3751,7 @@ static struct usb_hcd *oxu_create(struct platform_device *pdev, - if (ret < 0) - return ERR_PTR(ret); - -+ device_wakeup_enable(hcd->self.controller); - return hcd; - } - -diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c -index 3bddfcf..47b1322 100644 ---- a/drivers/usb/host/r8a66597-hcd.c -+++ b/drivers/usb/host/r8a66597-hcd.c -@@ -2514,6 +2514,7 @@ static int r8a66597_probe(struct platform_device *pdev) - dev_err(&pdev->dev, "Failed to add hcd\n"); - goto clean_up3; - } -+ device_wakeup_enable(hcd->self.controller); - - return 0; - -diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c -index 79620c3..0115e7f 100644 ---- a/drivers/usb/host/sl811-hcd.c -+++ b/drivers/usb/host/sl811-hcd.c -@@ -1732,6 +1732,8 @@ static void remove_debug_file(struct sl811 *sl811) - if (retval != 0) - goto err6; - -+ device_wakeup_enable(hcd->self.controller); -+ - create_debug_file(sl811); - return retval; - -diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c -index 46236e9..c067175 100644 ---- a/drivers/usb/host/u132-hcd.c -+++ b/drivers/usb/host/u132-hcd.c -@@ -3133,6 +3133,7 @@ static int u132_probe(struct platform_device *pdev) - u132_u132_put_kref(u132); - return retval; - } else { -+ device_wakeup_enable(hcd->self.controller); - u132_monitor_queue_work(u132, 100); - return 0; - } -diff --git a/drivers/usb/host/uhci-grlib.c b/drivers/usb/host/uhci-grlib.c -index 53c23ff..ab25dc3 100644 ---- a/drivers/usb/host/uhci-grlib.c -+++ b/drivers/usb/host/uhci-grlib.c -@@ -141,6 +141,7 @@ static int uhci_hcd_grlib_probe(struct platform_device *op) - if (rv) - goto err_uhci; - -+ device_wakeup_enable(hcd->self.controller); - return 0; - - err_uhci: -diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c -index 3003fef..44e6c9d 100644 ---- a/drivers/usb/host/uhci-platform.c -+++ b/drivers/usb/host/uhci-platform.c -@@ -108,6 +108,7 @@ static int uhci_hcd_platform_probe(struct platform_device *pdev) - if (ret) - goto err_uhci; - -+ device_wakeup_enable(hcd->self.controller); - return 0; - - err_uhci: -diff --git a/drivers/usb/host/whci/hcd.c b/drivers/usb/host/whci/hcd.c -index 1b0888f..d7b363a 100644 ---- a/drivers/usb/host/whci/hcd.c -+++ b/drivers/usb/host/whci/hcd.c -@@ -293,6 +293,7 @@ static int whc_probe(struct umc_dev *umc) - dev_err(dev, "cannot add HCD: %d\n", ret); - goto error_usb_add_hcd; - } -+ device_wakeup_enable(usb_hcd->self.controller); - - ret = wusbhc_b_create(wusbhc); - if (ret) { -diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c -index d9c169f..9d29aa1 100644 ---- a/drivers/usb/host/xhci-plat.c -+++ b/drivers/usb/host/xhci-plat.c -@@ -139,6 +139,7 @@ static int xhci_plat_probe(struct platform_device *pdev) - ret = usb_add_hcd(hcd, irq, IRQF_SHARED); - if (ret) - goto unmap_registers; -+ device_wakeup_enable(hcd->self.controller); - - /* USB 2.0 roothub is stored in the platform_device now. */ - hcd = platform_get_drvdata(pdev); -diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c -index 6582a20..e208375 100644 ---- a/drivers/usb/musb/musb_host.c -+++ b/drivers/usb/musb/musb_host.c -@@ -2657,6 +2657,7 @@ int musb_host_setup(struct musb *musb, int power_budget) - if (ret < 0) - return ret; - -+ device_wakeup_enable(hcd->self.controller); - return 0; - } - -diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c -index e9d4cd9..3775283 100644 ---- a/drivers/usb/phy/phy-msm-usb.c -+++ b/drivers/usb/phy/phy-msm-usb.c -@@ -669,6 +669,7 @@ static void msm_otg_start_host(struct usb_phy *phy, int on) - pdata->setup_gpio(OTG_STATE_A_HOST); - #ifdef CONFIG_USB - usb_add_hcd(hcd, hcd->irq, IRQF_SHARED); -+ device_wakeup_enable(hcd->self.controller); - #endif - } else { - dev_dbg(phy->dev, "host off\n"); -diff --git a/drivers/usb/phy/phy-mv-usb.c b/drivers/usb/phy/phy-mv-usb.c -index 98f6ac6..44f316e 100644 ---- a/drivers/usb/phy/phy-mv-usb.c -+++ b/drivers/usb/phy/phy-mv-usb.c -@@ -213,10 +213,12 @@ static void mv_otg_start_host(struct mv_otg *mvotg, int on) - - hcd = bus_to_hcd(otg->host); - -- if (on) -+ if (on) { - usb_add_hcd(hcd, hcd->irq, IRQF_SHARED); -- else -+ device_wakeup_enable(hcd->self.controller); -+ } else { - usb_remove_hcd(hcd); -+ } - #endif /* CONFIG_USB */ - } - -diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c -index e40f565..10e1ded 100644 ---- a/drivers/usb/renesas_usbhs/mod_host.c -+++ b/drivers/usb/renesas_usbhs/mod_host.c -@@ -1469,6 +1469,7 @@ static int usbhsh_start(struct usbhs_priv *priv) - ret = usb_add_hcd(hcd, 0, 0); - if (ret < 0) - return 0; -+ device_wakeup_enable(hcd->self.controller); - - /* - * pipe initialize and enable DCP --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/180-1-usb-ohci-platform-dt-instantiation.patch b/target/linux/sunxi/patches-3.13/180-1-usb-ohci-platform-dt-instantiation.patch deleted file mode 100644 index 070f4f4cd5..0000000000 --- a/target/linux/sunxi/patches-3.13/180-1-usb-ohci-platform-dt-instantiation.patch +++ /dev/null @@ -1,322 +0,0 @@ -From 6b63b9b2093258541dd79a3ed311cd1d0412b846 Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Sun, 5 Jan 2014 14:42:39 +0100 -Subject: [PATCH] ohci-platform: Add support for devicetree instantiation - -Add support for ohci-platform instantiation from devicetree, including -optionally getting clks and a phy from devicetree, and enabling / disabling -those on power_on / off. - -This should allow using ohci-platform from devicetree in various cases. -Specifically after this commit it can be used for the ohci controller found -on Allwinner sunxi SoCs. - -Signed-off-by: Hans de Goede -Acked-by: Alan Stern ---- - Documentation/devicetree/bindings/usb/usb-ohci.txt | 22 +++ - drivers/usb/host/ohci-platform.c | 162 ++++++++++++++++++--- - 2 files changed, 162 insertions(+), 22 deletions(-) - create mode 100644 Documentation/devicetree/bindings/usb/usb-ohci.txt - -diff --git a/Documentation/devicetree/bindings/usb/usb-ohci.txt b/Documentation/devicetree/bindings/usb/usb-ohci.txt -new file mode 100644 -index 0000000..6ba38d9 ---- /dev/null -+++ b/Documentation/devicetree/bindings/usb/usb-ohci.txt -@@ -0,0 +1,22 @@ -+USB OHCI controllers -+ -+Required properties: -+- compatible : "usb-ohci" -+- reg : ohci controller register range (address and length) -+- interrupts : ohci controller interrupt -+ -+Optional properties: -+- clocks : a list of phandle + clock specifier pairs -+- phys : phandle + phy specifier pair -+- phy-names : "usb" -+ -+Example: -+ -+ ohci0: usb@01c14400 { -+ compatible = "allwinner,sun4i-a10-ohci", "usb-ohci"; -+ reg = <0x01c14400 0x100>; -+ interrupts = <64>; -+ clocks = <&usb_clk 6>, <&ahb_gates 2>; -+ phys = <&usbphy 1>; -+ phy-names = "usb"; -+ }; -diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c -index 68f674c..49304dd 100644 ---- a/drivers/usb/host/ohci-platform.c -+++ b/drivers/usb/host/ohci-platform.c -@@ -3,6 +3,7 @@ - * - * Copyright 2007 Michael Buesch - * Copyright 2011-2012 Hauke Mehrtens -+ * Copyright 2014 Hans de Goede - * - * Derived from the OCHI-SSB driver - * Derived from the OHCI-PCI driver -@@ -14,11 +15,14 @@ - * Licensed under the GNU/GPL. See COPYING for details. - */ - -+#include -+#include - #include - #include - #include - #include - #include -+#include - #include - #include - #include -@@ -27,6 +31,13 @@ - #include "ohci.h" - - #define DRIVER_DESC "OHCI generic platform driver" -+#define OHCI_MAX_CLKS 3 -+#define hcd_to_ohci_priv(h) ((struct ohci_platform_priv *)hcd_to_ohci(h)->priv) -+ -+struct ohci_platform_priv { -+ struct clk *clks[OHCI_MAX_CLKS]; -+ struct phy *phy; -+}; - - static const char hcd_name[] = "ohci-platform"; - -@@ -48,11 +59,67 @@ static int ohci_platform_reset(struct usb_hcd *hcd) - return ohci_setup(hcd); - } - -+static int ohci_platform_power_on(struct platform_device *dev) -+{ -+ struct usb_hcd *hcd = platform_get_drvdata(dev); -+ struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd); -+ int clk, ret; -+ -+ for (clk = 0; clk < OHCI_MAX_CLKS && priv->clks[clk]; clk++) { -+ ret = clk_prepare_enable(priv->clks[clk]); -+ if (ret) -+ goto err_disable_clks; -+ } -+ -+ if (priv->phy) { -+ ret = phy_init(priv->phy); -+ if (ret) -+ goto err_disable_clks; -+ -+ ret = phy_power_on(priv->phy); -+ if (ret) -+ goto err_exit_phy; -+ } -+ -+ return 0; -+ -+err_exit_phy: -+ phy_exit(priv->phy); -+err_disable_clks: -+ while (--clk >= 0) -+ clk_disable_unprepare(priv->clks[clk]); -+ -+ return ret; -+} -+ -+static void ohci_platform_power_off(struct platform_device *dev) -+{ -+ struct usb_hcd *hcd = platform_get_drvdata(dev); -+ struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd); -+ int clk; -+ -+ if (priv->phy) { -+ phy_power_off(priv->phy); -+ phy_exit(priv->phy); -+ } -+ -+ for (clk = OHCI_MAX_CLKS - 1; clk >= 0; clk--) -+ if (priv->clks[clk]) -+ clk_disable_unprepare(priv->clks[clk]); -+} -+ - static struct hc_driver __read_mostly ohci_platform_hc_driver; - - static const struct ohci_driver_overrides platform_overrides __initconst = { -- .product_desc = "Generic Platform OHCI controller", -- .reset = ohci_platform_reset, -+ .product_desc = "Generic Platform OHCI controller", -+ .reset = ohci_platform_reset, -+ .extra_priv_size = sizeof(struct ohci_platform_priv), -+}; -+ -+static struct usb_ohci_pdata ohci_platform_defaults = { -+ .power_on = ohci_platform_power_on, -+ .power_suspend = ohci_platform_power_off, -+ .power_off = ohci_platform_power_off, - }; - - static int ohci_platform_probe(struct platform_device *dev) -@@ -60,17 +127,23 @@ static int ohci_platform_probe(struct platform_device *dev) - struct usb_hcd *hcd; - struct resource *res_mem; - struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev); -- int irq; -- int err = -ENOMEM; -- -- if (!pdata) { -- WARN_ON(1); -- return -ENODEV; -- } -+ struct ohci_platform_priv *priv; -+ int err, irq, clk = 0; - - if (usb_disabled()) - return -ENODEV; - -+ /* -+ * Use reasonable defaults so platforms don't have to provide these -+ * with DT probing on ARM. -+ */ -+ if (!pdata) -+ pdata = &ohci_platform_defaults; -+ -+ err = dma_coerce_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32)); -+ if (err) -+ return err; -+ - irq = platform_get_irq(dev, 0); - if (irq < 0) { - dev_err(&dev->dev, "no irq provided"); -@@ -83,17 +156,40 @@ static int ohci_platform_probe(struct platform_device *dev) - return -ENXIO; - } - -+ hcd = usb_create_hcd(&ohci_platform_hc_driver, &dev->dev, -+ dev_name(&dev->dev)); -+ if (!hcd) -+ return -ENOMEM; -+ -+ platform_set_drvdata(dev, hcd); -+ dev->dev.platform_data = pdata; -+ priv = hcd_to_ohci_priv(hcd); -+ -+ if (pdata == &ohci_platform_defaults && dev->dev.of_node) { -+ priv->phy = devm_phy_get(&dev->dev, "usb"); -+ if (IS_ERR(priv->phy)) { -+ err = PTR_ERR(priv->phy); -+ if (err == -EPROBE_DEFER) -+ goto err_put_hcd; -+ priv->phy = NULL; -+ } -+ -+ for (clk = 0; clk < OHCI_MAX_CLKS; clk++) { -+ priv->clks[clk] = of_clk_get(dev->dev.of_node, clk); -+ if (IS_ERR(priv->clks[clk])) { -+ err = PTR_ERR(priv->clks[clk]); -+ if (err == -EPROBE_DEFER) -+ goto err_put_clks; -+ priv->clks[clk] = NULL; -+ break; -+ } -+ } -+ } -+ - if (pdata->power_on) { - err = pdata->power_on(dev); - if (err < 0) -- return err; -- } -- -- hcd = usb_create_hcd(&ohci_platform_hc_driver, &dev->dev, -- dev_name(&dev->dev)); -- if (!hcd) { -- err = -ENOMEM; -- goto err_power; -+ goto err_put_clks; - } - - hcd->rsrc_start = res_mem->start; -@@ -102,11 +198,11 @@ static int ohci_platform_probe(struct platform_device *dev) - hcd->regs = devm_ioremap_resource(&dev->dev, res_mem); - if (IS_ERR(hcd->regs)) { - err = PTR_ERR(hcd->regs); -- goto err_put_hcd; -+ goto err_power; - } - err = usb_add_hcd(hcd, irq, IRQF_SHARED); - if (err) -- goto err_put_hcd; -+ goto err_power; - - device_wakeup_enable(hcd->self.controller); - -@@ -114,11 +210,17 @@ static int ohci_platform_probe(struct platform_device *dev) - - return err; - --err_put_hcd: -- usb_put_hcd(hcd); - err_power: - if (pdata->power_off) - pdata->power_off(dev); -+err_put_clks: -+ while (--clk >= 0) -+ clk_put(priv->clks[clk]); -+err_put_hcd: -+ if (pdata == &ohci_platform_defaults) -+ dev->dev.platform_data = NULL; -+ -+ usb_put_hcd(hcd); - - return err; - } -@@ -127,13 +229,22 @@ static int ohci_platform_remove(struct platform_device *dev) - { - struct usb_hcd *hcd = platform_get_drvdata(dev); - struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev); -+ struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd); -+ int clk; - - usb_remove_hcd(hcd); -- usb_put_hcd(hcd); - - if (pdata->power_off) - pdata->power_off(dev); - -+ for (clk = 0; clk < OHCI_MAX_CLKS && priv->clks[clk]; clk++) -+ clk_put(priv->clks[clk]); -+ -+ usb_put_hcd(hcd); -+ -+ if (pdata == &ohci_platform_defaults) -+ dev->dev.platform_data = NULL; -+ - return 0; - } - -@@ -180,6 +291,12 @@ static int ohci_platform_resume(struct device *dev) - #define ohci_platform_resume NULL - #endif /* CONFIG_PM */ - -+static const struct of_device_id ohci_platform_ids[] = { -+ { .compatible = "usb-ohci", }, -+ { } -+}; -+MODULE_DEVICE_TABLE(of, ohci_platform_ids); -+ - static const struct platform_device_id ohci_platform_table[] = { - { "ohci-platform", 0 }, - { } -@@ -200,6 +317,7 @@ static int ohci_platform_resume(struct device *dev) - .owner = THIS_MODULE, - .name = "ohci-platform", - .pm = &ohci_platform_pm_ops, -+ .of_match_table = ohci_platform_ids, - } - }; - --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/180-2-usb-ehci-platform-support-clk-phy-via-dt.patch b/target/linux/sunxi/patches-3.13/180-2-usb-ehci-platform-support-clk-phy-via-dt.patch deleted file mode 100644 index 908d8410aa..0000000000 --- a/target/linux/sunxi/patches-3.13/180-2-usb-ehci-platform-support-clk-phy-via-dt.patch +++ /dev/null @@ -1,392 +0,0 @@ -From 543824fa2a8a592a6eec0e0053063284980dc378 Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Sun, 5 Jan 2014 00:04:02 +0100 -Subject: [PATCH] ehci-platform: Add support for clks and phy passed through - devicetree - -Currently ehci-platform is only used in combination with devicetree when used -with some Via socs. By extending it to (optionally) get clks and a phy from -devicetree, and enabling / disabling those on power_on / off, it can be used -more generically. Specifically after this commit it can be used for the -ehci controller on Allwinner sunxi SoCs. - -Since ehci-platform is intended to handle any generic enough non pci ehci -device, add a "usb-ehci" compatibility string. - -There already is a usb-ehci device-tree bindings document, update this -with clks and phy bindings info. - -Although actually quite generic so far the via,vt8500 compatibilty string -had its own bindings document. Somehow we even ended up with 2 of them. Since -these provide no extra information over the generic usb-ehci documentation, -this patch removes them. - -The ehci-ppc-of.c driver also claims the usb-ehci compatibility string, -even though it mostly is ibm,usb-ehci-440epx specific. ehci-platform.c is -not needed on ppc platforms, so add a !PPC_OF dependency to it to avoid -2 drivers claiming the same compatibility string getting build on ppc. - -Signed-off-by: Hans de Goede -Acked-by: Alan Stern ---- - Documentation/devicetree/bindings/usb/usb-ehci.txt | 25 +++- - .../devicetree/bindings/usb/via,vt8500-ehci.txt | 15 --- - .../devicetree/bindings/usb/vt8500-ehci.txt | 12 -- - drivers/usb/host/Kconfig | 1 + - drivers/usb/host/ehci-platform.c | 147 +++++++++++++++++---- - 5 files changed, 142 insertions(+), 58 deletions(-) - delete mode 100644 Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt - delete mode 100644 Documentation/devicetree/bindings/usb/vt8500-ehci.txt - -diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt -index fa18612..2c1aeeb 100644 ---- a/Documentation/devicetree/bindings/usb/usb-ehci.txt -+++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt -@@ -7,13 +7,14 @@ Required properties: - (debug-port or other) can be also specified here, but only after - definition of standard EHCI registers. - - interrupts : one EHCI interrupt should be described here. --If device registers are implemented in big endian mode, the device --node should have "big-endian-regs" property. --If controller implementation operates with big endian descriptors, --"big-endian-desc" property should be specified. --If both big endian registers and descriptors are used by the controller --implementation, "big-endian" property can be specified instead of having --both "big-endian-regs" and "big-endian-desc". -+ -+Optional properties: -+ - big-endian-regs : boolean, set this for hcds with big-endian registers -+ - big-endian-desc : boolean, set this for hcds with big-endian descriptors -+ - big-endian : boolean, for hcds with big-endian-regs + big-endian-desc -+ - clocks : a list of phandle + clock specifier pairs -+ - phys : phandle + phy specifier pair -+ - phy-names : "usb" - - Example (Sequoia 440EPx): - ehci@e0000300 { -@@ -23,3 +24,13 @@ Example (Sequoia 440EPx): - reg = <0 e0000300 90 0 e0000390 70>; - big-endian; - }; -+ -+Example (Allwinner sun4i A10 SoC): -+ ehci0: usb@01c14000 { -+ compatible = "allwinner,sun4i-a10-ehci", "usb-ehci"; -+ reg = <0x01c14000 0x100>; -+ interrupts = <39>; -+ clocks = <&ahb_gates 1>; -+ phys = <&usbphy 1>; -+ phy-names = "usb"; -+ }; -diff --git a/Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt b/Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt -deleted file mode 100644 -index 17b3ad1..0000000 ---- a/Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt -+++ /dev/null -@@ -1,15 +0,0 @@ --VIA/Wondermedia VT8500 EHCI Controller ------------------------------------------------------- -- --Required properties: --- compatible : "via,vt8500-ehci" --- reg : Should contain 1 register ranges(address and length) --- interrupts : ehci controller interrupt -- --Example: -- -- ehci@d8007900 { -- compatible = "via,vt8500-ehci"; -- reg = <0xd8007900 0x200>; -- interrupts = <43>; -- }; -diff --git a/Documentation/devicetree/bindings/usb/vt8500-ehci.txt b/Documentation/devicetree/bindings/usb/vt8500-ehci.txt -deleted file mode 100644 -index 5fb8fd6..0000000 ---- a/Documentation/devicetree/bindings/usb/vt8500-ehci.txt -+++ /dev/null -@@ -1,12 +0,0 @@ --VIA VT8500 and Wondermedia WM8xxx SoC USB controllers. -- --Required properties: -- - compatible: Should be "via,vt8500-ehci" or "wm,prizm-ehci". -- - reg: Address range of the ehci registers. size should be 0x200 -- - interrupts: Should contain the ehci interrupt. -- --usb: ehci@D8007100 { -- compatible = "wm,prizm-ehci", "usb-ehci"; -- reg = <0xD8007100 0x200>; -- interrupts = <1>; --}; -diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig -index a9707da..e28cbe0 100644 ---- a/drivers/usb/host/Kconfig -+++ b/drivers/usb/host/Kconfig -@@ -255,6 +255,7 @@ config USB_EHCI_ATH79 - - config USB_EHCI_HCD_PLATFORM - tristate "Generic EHCI driver for a platform device" -+ depends on !PPC_OF - default n - ---help--- - Adds an EHCI host driver for a generic platform device, which -diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c -index 01536cf..5ebd0b7 100644 ---- a/drivers/usb/host/ehci-platform.c -+++ b/drivers/usb/host/ehci-platform.c -@@ -3,6 +3,7 @@ - * - * Copyright 2007 Steven Brown - * Copyright 2010-2012 Hauke Mehrtens -+ * Copyright 2014 Hans de Goede - * - * Derived from the ohci-ssb driver - * Copyright 2007 Michael Buesch -@@ -18,6 +19,7 @@ - * - * Licensed under the GNU/GPL. See COPYING for details. - */ -+#include - #include - #include - #include -@@ -25,6 +27,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -33,6 +36,13 @@ - #include "ehci.h" - - #define DRIVER_DESC "EHCI generic platform driver" -+#define EHCI_MAX_CLKS 3 -+#define hcd_to_ehci_priv(h) ((struct ehci_platform_priv *)hcd_to_ehci(h)->priv) -+ -+struct ehci_platform_priv { -+ struct clk *clks[EHCI_MAX_CLKS]; -+ struct phy *phy; -+}; - - static const char hcd_name[] = "ehci-platform"; - -@@ -64,38 +74,90 @@ static int ehci_platform_reset(struct usb_hcd *hcd) - return 0; - } - -+static int ehci_platform_power_on(struct platform_device *dev) -+{ -+ struct usb_hcd *hcd = platform_get_drvdata(dev); -+ struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd); -+ int clk, ret; -+ -+ for (clk = 0; clk < EHCI_MAX_CLKS && priv->clks[clk]; clk++) { -+ ret = clk_prepare_enable(priv->clks[clk]); -+ if (ret) -+ goto err_disable_clks; -+ } -+ -+ if (priv->phy) { -+ ret = phy_init(priv->phy); -+ if (ret) -+ goto err_disable_clks; -+ -+ ret = phy_power_on(priv->phy); -+ if (ret) -+ goto err_exit_phy; -+ } -+ -+ return 0; -+ -+err_exit_phy: -+ phy_exit(priv->phy); -+err_disable_clks: -+ while (--clk >= 0) -+ clk_disable_unprepare(priv->clks[clk]); -+ -+ return ret; -+} -+ -+static void ehci_platform_power_off(struct platform_device *dev) -+{ -+ struct usb_hcd *hcd = platform_get_drvdata(dev); -+ struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd); -+ int clk; -+ -+ if (priv->phy) { -+ phy_power_off(priv->phy); -+ phy_exit(priv->phy); -+ } -+ -+ for (clk = EHCI_MAX_CLKS - 1; clk >= 0; clk--) -+ if (priv->clks[clk]) -+ clk_disable_unprepare(priv->clks[clk]); -+} -+ - static struct hc_driver __read_mostly ehci_platform_hc_driver; - - static const struct ehci_driver_overrides platform_overrides __initconst = { -- .reset = ehci_platform_reset, -+ .reset = ehci_platform_reset, -+ .extra_priv_size = sizeof(struct ehci_platform_priv), - }; - --static struct usb_ehci_pdata ehci_platform_defaults; -+static struct usb_ehci_pdata ehci_platform_defaults = { -+ .power_on = ehci_platform_power_on, -+ .power_suspend = ehci_platform_power_off, -+ .power_off = ehci_platform_power_off, -+}; - - static int ehci_platform_probe(struct platform_device *dev) - { - struct usb_hcd *hcd; - struct resource *res_mem; -- struct usb_ehci_pdata *pdata; -- int irq; -- int err; -+ struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev); -+ struct ehci_platform_priv *priv; -+ int err, irq, clk = 0; - - if (usb_disabled()) - return -ENODEV; - - /* -- * use reasonable defaults so platforms don't have to provide these. -- * with DT probing on ARM, none of these are set. -+ * Use reasonable defaults so platforms don't have to provide these -+ * with DT probing on ARM. - */ -- if (!dev_get_platdata(&dev->dev)) -- dev->dev.platform_data = &ehci_platform_defaults; -+ if (!pdata) -+ pdata = &ehci_platform_defaults; - - err = dma_coerce_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32)); - if (err) - return err; - -- pdata = dev_get_platdata(&dev->dev); -- - irq = platform_get_irq(dev, 0); - if (irq < 0) { - dev_err(&dev->dev, "no irq provided"); -@@ -107,17 +169,40 @@ static int ehci_platform_probe(struct platform_device *dev) - return -ENXIO; - } - -+ hcd = usb_create_hcd(&ehci_platform_hc_driver, &dev->dev, -+ dev_name(&dev->dev)); -+ if (!hcd) -+ return -ENOMEM; -+ -+ platform_set_drvdata(dev, hcd); -+ dev->dev.platform_data = pdata; -+ priv = hcd_to_ehci_priv(hcd); -+ -+ if (pdata == &ehci_platform_defaults && dev->dev.of_node) { -+ priv->phy = devm_phy_get(&dev->dev, "usb"); -+ if (IS_ERR(priv->phy)) { -+ err = PTR_ERR(priv->phy); -+ if (err == -EPROBE_DEFER) -+ goto err_put_hcd; -+ priv->phy = NULL; -+ } -+ -+ for (clk = 0; clk < EHCI_MAX_CLKS; clk++) { -+ priv->clks[clk] = of_clk_get(dev->dev.of_node, clk); -+ if (IS_ERR(priv->clks[clk])) { -+ err = PTR_ERR(priv->clks[clk]); -+ if (err == -EPROBE_DEFER) -+ goto err_put_clks; -+ priv->clks[clk] = NULL; -+ break; -+ } -+ } -+ } -+ - if (pdata->power_on) { - err = pdata->power_on(dev); - if (err < 0) -- return err; -- } -- -- hcd = usb_create_hcd(&ehci_platform_hc_driver, &dev->dev, -- dev_name(&dev->dev)); -- if (!hcd) { -- err = -ENOMEM; -- goto err_power; -+ goto err_put_clks; - } - - hcd->rsrc_start = res_mem->start; -@@ -126,22 +211,28 @@ static int ehci_platform_probe(struct platform_device *dev) - hcd->regs = devm_ioremap_resource(&dev->dev, res_mem); - if (IS_ERR(hcd->regs)) { - err = PTR_ERR(hcd->regs); -- goto err_put_hcd; -+ goto err_power; - } - err = usb_add_hcd(hcd, irq, IRQF_SHARED); - if (err) -- goto err_put_hcd; -+ goto err_power; - - device_wakeup_enable(hcd->self.controller); - platform_set_drvdata(dev, hcd); - - return err; - --err_put_hcd: -- usb_put_hcd(hcd); - err_power: - if (pdata->power_off) - pdata->power_off(dev); -+err_put_clks: -+ while (--clk >= 0) -+ clk_put(priv->clks[clk]); -+err_put_hcd: -+ if (pdata == &ehci_platform_defaults) -+ dev->dev.platform_data = NULL; -+ -+ usb_put_hcd(hcd); - - return err; - } -@@ -150,13 +241,19 @@ static int ehci_platform_remove(struct platform_device *dev) - { - struct usb_hcd *hcd = platform_get_drvdata(dev); - struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev); -+ struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd); -+ int clk; - - usb_remove_hcd(hcd); -- usb_put_hcd(hcd); - - if (pdata->power_off) - pdata->power_off(dev); - -+ for (clk = 0; clk < EHCI_MAX_CLKS && priv->clks[clk]; clk++) -+ clk_put(priv->clks[clk]); -+ -+ usb_put_hcd(hcd); -+ - if (pdata == &ehci_platform_defaults) - dev->dev.platform_data = NULL; - -@@ -207,8 +304,10 @@ static int ehci_platform_resume(struct device *dev) - static const struct of_device_id vt8500_ehci_ids[] = { - { .compatible = "via,vt8500-ehci", }, - { .compatible = "wm,prizm-ehci", }, -+ { .compatible = "usb-ehci", }, - {} - }; -+MODULE_DEVICE_TABLE(of, vt8500_ehci_ids); - - static const struct platform_device_id ehci_platform_table[] = { - { "ehci-platform", 0 }, --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/180-3-usb-ohci-platform-support-bigendian.patch b/target/linux/sunxi/patches-3.13/180-3-usb-ohci-platform-support-bigendian.patch deleted file mode 100644 index 178bf4590c..0000000000 --- a/target/linux/sunxi/patches-3.13/180-3-usb-ohci-platform-support-bigendian.patch +++ /dev/null @@ -1,80 +0,0 @@ -From 10d7c018269928db8487057c4c143dbd014d2262 Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Tue, 21 Jan 2014 16:05:47 +0100 -Subject: [PATCH] ohci-platform: Add support for controllers with big-endian - regs / descriptors - -Note this commit uses the same devicetree booleans for this as the ones -already existing in the usb-ehci bindings, see: -Documentation/devicetree/bindings/usb/usb-ehci.txt - -Signed-off-by: Hans de Goede ---- - Documentation/devicetree/bindings/usb/usb-ohci.txt | 3 +++ - drivers/usb/host/ohci-platform.c | 27 ++++++++++++++++++++++ - 2 files changed, 30 insertions(+) - -diff --git a/Documentation/devicetree/bindings/usb/usb-ohci.txt b/Documentation/devicetree/bindings/usb/usb-ohci.txt -index 6ba38d9..6933b0c 100644 ---- a/Documentation/devicetree/bindings/usb/usb-ohci.txt -+++ b/Documentation/devicetree/bindings/usb/usb-ohci.txt -@@ -6,6 +6,9 @@ Required properties: - - interrupts : ohci controller interrupt - - Optional properties: -+- big-endian-regs : boolean, set this for hcds with big-endian registers -+- big-endian-desc : boolean, set this for hcds with big-endian descriptors -+- big-endian : boolean, for hcds with big-endian-regs + big-endian-desc - - clocks : a list of phandle + clock specifier pairs - - phys : phandle + phy specifier pair - - phy-names : "usb" -diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c -index 49304dd..e2c28fd 100644 ---- a/drivers/usb/host/ohci-platform.c -+++ b/drivers/usb/host/ohci-platform.c -@@ -128,6 +128,7 @@ static int ohci_platform_probe(struct platform_device *dev) - struct resource *res_mem; - struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev); - struct ohci_platform_priv *priv; -+ struct ohci_hcd *ohci; - int err, irq, clk = 0; - - if (usb_disabled()) -@@ -164,8 +165,34 @@ static int ohci_platform_probe(struct platform_device *dev) - platform_set_drvdata(dev, hcd); - dev->dev.platform_data = pdata; - priv = hcd_to_ohci_priv(hcd); -+ ohci = hcd_to_ohci(hcd); - - if (pdata == &ohci_platform_defaults && dev->dev.of_node) { -+ if (of_property_read_bool(dev->dev.of_node, "big-endian-regs")) -+ ohci->flags |= OHCI_QUIRK_BE_MMIO; -+ -+ if (of_property_read_bool(dev->dev.of_node, "big-endian-desc")) -+ ohci->flags |= OHCI_QUIRK_BE_DESC; -+ -+ if (of_property_read_bool(dev->dev.of_node, "big-endian")) -+ ohci->flags |= OHCI_QUIRK_BE_MMIO | OHCI_QUIRK_BE_DESC; -+ -+#ifndef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO -+ if (ohci->flags & OHCI_QUIRK_BE_MMIO) { -+ dev_err(&dev->dev, -+ "Error big-endian-regs not compiled in\n"); -+ err = -EINVAL; -+ goto err_put_hcd; -+ } -+#endif -+#ifndef CONFIG_USB_OHCI_BIG_ENDIAN_DESC -+ if (ohci->flags & OHCI_QUIRK_BE_DESC) { -+ dev_err(&dev->dev, -+ "Error big-endian-desc not compiled in\n"); -+ err = -EINVAL; -+ goto err_put_hcd; -+ } -+#endif - priv->phy = devm_phy_get(&dev->dev, "usb"); - if (IS_ERR(priv->phy)) { - err = PTR_ERR(priv->phy); --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/180-4-usb-ehci-platform-support-bigendian.patch b/target/linux/sunxi/patches-3.13/180-4-usb-ehci-platform-support-bigendian.patch deleted file mode 100644 index 5f7043401d..0000000000 --- a/target/linux/sunxi/patches-3.13/180-4-usb-ehci-platform-support-bigendian.patch +++ /dev/null @@ -1,77 +0,0 @@ -From 57b5e74a0d7ba5dbf77ee05a2693635faba5fe30 Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Tue, 21 Jan 2014 16:20:53 +0100 -Subject: [PATCH] ehci-platform: Add support for controllers with big-endian - regs / descriptors - -This uses the already documented devicetree booleans for this, see: -Documentation/devicetree/bindings/usb/usb-ehci.txt - -Signed-off-by: Hans de Goede ---- - drivers/usb/host/ehci-platform.c | 33 +++++++++++++++++++++++++++++++-- - 1 file changed, 31 insertions(+), 2 deletions(-) - -diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c -index 5ebd0b7..8fde649 100644 ---- a/drivers/usb/host/ehci-platform.c -+++ b/drivers/usb/host/ehci-platform.c -@@ -55,8 +55,10 @@ static int ehci_platform_reset(struct usb_hcd *hcd) - - hcd->has_tt = pdata->has_tt; - ehci->has_synopsys_hc_bug = pdata->has_synopsys_hc_bug; -- ehci->big_endian_desc = pdata->big_endian_desc; -- ehci->big_endian_mmio = pdata->big_endian_mmio; -+ if (pdata->big_endian_desc) -+ ehci->big_endian_desc = 1; -+ if (pdata->big_endian_mmio) -+ ehci->big_endian_mmio = 1; - ehci->ignore_oc = pdata->ignore_oc; - - if (pdata->pre_setup) { -@@ -142,6 +144,7 @@ static int ehci_platform_probe(struct platform_device *dev) - struct resource *res_mem; - struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev); - struct ehci_platform_priv *priv; -+ struct ehci_hcd *ehci; - int err, irq, clk = 0; - - if (usb_disabled()) -@@ -177,8 +180,34 @@ static int ehci_platform_probe(struct platform_device *dev) - platform_set_drvdata(dev, hcd); - dev->dev.platform_data = pdata; - priv = hcd_to_ehci_priv(hcd); -+ ehci = hcd_to_ehci(hcd); - - if (pdata == &ehci_platform_defaults && dev->dev.of_node) { -+ if (of_property_read_bool(dev->dev.of_node, "big-endian-regs")) -+ ehci->big_endian_mmio = 1; -+ -+ if (of_property_read_bool(dev->dev.of_node, "big-endian-desc")) -+ ehci->big_endian_desc = 1; -+ -+ if (of_property_read_bool(dev->dev.of_node, "big-endian")) -+ ehci->big_endian_mmio = ehci->big_endian_desc = 1; -+ -+#ifndef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO -+ if (ehci->big_endian_mmio) { -+ dev_err(&dev->dev, -+ "Error big-endian-regs not compiled in\n"); -+ err = -EINVAL; -+ goto err_put_hcd; -+ } -+#endif -+#ifndef CONFIG_USB_EHCI_BIG_ENDIAN_DESC -+ if (ehci->big_endian_desc) { -+ dev_err(&dev->dev, -+ "Error big-endian-desc not compiled in\n"); -+ err = -EINVAL; -+ goto err_put_hcd; -+ } -+#endif - priv->phy = devm_phy_get(&dev->dev, "usb"); - if (IS_ERR(priv->phy)) { - err = PTR_ERR(priv->phy); --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/180-5-usb-ohci-change-compat-string.patch b/target/linux/sunxi/patches-3.13/180-5-usb-ohci-change-compat-string.patch deleted file mode 100644 index 4255a34388..0000000000 --- a/target/linux/sunxi/patches-3.13/180-5-usb-ohci-change-compat-string.patch +++ /dev/null @@ -1,69 +0,0 @@ -From abddd82743cc2c4acdfe66a6d5e63f2085d2269b Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Tue, 11 Feb 2014 11:27:29 +0100 -Subject: [PATCH] ohci-platform: Change compatible string from usb-ohci to - generic-ohci - -The initial versions of the devicetree enablement patches for ohci-platform -used "ohci-platform" as compatible string. However this was disliked by various -reviewers because the platform bus is a Linux invention and devicetree is -supposed to be OS agnostic. After much discussion I gave up and went with -the generic usb-ohci as requested. - -In retro-spect I should have chosen something different, the dts files for many -existing boards already claim to be compatible with "usb-ohci", ie they have: - - compatible = "ti,ohci-omap3", "usb-ohci"; - -In theory this should not be a problem since the "ti,ohci-omap3" entry takes -presedence, but in practice using a conflicting compatible string is an issue, -because it makes which driver gets used depend on driver registration order. - -This patch changes the compatible string claimed by ohci-platform to -"generic-ohci", avoiding the driver registration / module loading ordering -problems. - -Signed-off-by: Hans de Goede ---- - Documentation/devicetree/bindings/usb/usb-ohci.txt | 4 ++-- - drivers/usb/host/ohci-platform.c | 2 +- - 2 files changed, 3 insertions(+), 3 deletions(-) - -diff --git a/Documentation/devicetree/bindings/usb/usb-ohci.txt b/Documentation/devicetree/bindings/usb/usb-ohci.txt -index 6933b0c..45f67d9 100644 ---- a/Documentation/devicetree/bindings/usb/usb-ohci.txt -+++ b/Documentation/devicetree/bindings/usb/usb-ohci.txt -@@ -1,7 +1,7 @@ - USB OHCI controllers - - Required properties: --- compatible : "usb-ohci" -+- compatible : "generic-ohci" - - reg : ohci controller register range (address and length) - - interrupts : ohci controller interrupt - -@@ -16,7 +16,7 @@ Optional properties: - Example: - - ohci0: usb@01c14400 { -- compatible = "allwinner,sun4i-a10-ohci", "usb-ohci"; -+ compatible = "allwinner,sun4i-a10-ohci", "generic-ohci"; - reg = <0x01c14400 0x100>; - interrupts = <64>; - clocks = <&usb_clk 6>, <&ahb_gates 2>; -diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c -index e2c28fd..b6ca0b2 100644 ---- a/drivers/usb/host/ohci-platform.c -+++ b/drivers/usb/host/ohci-platform.c -@@ -319,7 +319,7 @@ static int ohci_platform_resume(struct device *dev) - #endif /* CONFIG_PM */ - - static const struct of_device_id ohci_platform_ids[] = { -- { .compatible = "usb-ohci", }, -+ { .compatible = "generic-ohci", }, - { } - }; - MODULE_DEVICE_TABLE(of, ohci_platform_ids); --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/180-6-usb-ehci-change-compat-string.patch b/target/linux/sunxi/patches-3.13/180-6-usb-ehci-change-compat-string.patch deleted file mode 100644 index 5222422a5f..0000000000 --- a/target/linux/sunxi/patches-3.13/180-6-usb-ehci-change-compat-string.patch +++ /dev/null @@ -1,83 +0,0 @@ -From 80c544c77beeffee4e9484bf193ab391297688cd Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Tue, 11 Feb 2014 11:46:13 +0100 -Subject: [PATCH] ehci-platform: Change compatible string from usb-ehci to - generic-ehci - -The initial versions of the devicetree enablement patches for ehci-platform -used "ehci-platform" as compatible string. However this was disliked by various -reviewers because the platform bus is a Linux invention and devicetree is -supposed to be OS agnostic. After much discussion I gave up, added a: -"depends on !PPC_OF" to Kconfig to avoid a known conflict with PPC-OF platforms -and went with the generic usb-ehci as requested. - -In retro-spect I should have chosen something different, the dts files for many -existing boards already claim to be compatible with "usb-ehci", ie they have: - - compatible = "ti,ehci-omap", "usb-ehci"; - -In theory this should not be a problem since the "ti,ehci-omap" entry takes -presedence, but in practice using a conflicting compatible string is an issue, -because it makes which driver gets used depend on driver registration order. - -This patch changes the compatible string claimed by ehci-platform to -"generic-ehci", avoiding the driver registration / module loading ordering -problems, and removes the "depends on !PPC_OF" workaround. - -Signed-off-by: Hans de Goede ---- - Documentation/devicetree/bindings/usb/usb-ehci.txt | 4 ++-- - drivers/usb/host/Kconfig | 1 - - drivers/usb/host/ehci-platform.c | 2 +- - 3 files changed, 3 insertions(+), 4 deletions(-) - -diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt -index 2c1aeeb..ff151ec 100644 ---- a/Documentation/devicetree/bindings/usb/usb-ehci.txt -+++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt -@@ -1,7 +1,7 @@ - USB EHCI controllers - - Required properties: -- - compatible : should be "usb-ehci". -+ - compatible : should be "generic-ehci". - - reg : should contain at least address and length of the standard EHCI - register set for the device. Optional platform-dependent registers - (debug-port or other) can be also specified here, but only after -@@ -27,7 +27,7 @@ Example (Sequoia 440EPx): - - Example (Allwinner sun4i A10 SoC): - ehci0: usb@01c14000 { -- compatible = "allwinner,sun4i-a10-ehci", "usb-ehci"; -+ compatible = "allwinner,sun4i-a10-ehci", "generic-ehci"; - reg = <0x01c14000 0x100>; - interrupts = <39>; - clocks = <&ahb_gates 1>; -diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig -index e28cbe0..a9707da 100644 ---- a/drivers/usb/host/Kconfig -+++ b/drivers/usb/host/Kconfig -@@ -255,7 +255,6 @@ config USB_EHCI_ATH79 - - config USB_EHCI_HCD_PLATFORM - tristate "Generic EHCI driver for a platform device" -- depends on !PPC_OF - default n - ---help--- - Adds an EHCI host driver for a generic platform device, which -diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c -index 8fde649..1178730 100644 ---- a/drivers/usb/host/ehci-platform.c -+++ b/drivers/usb/host/ehci-platform.c -@@ -333,7 +333,7 @@ static int ehci_platform_resume(struct device *dev) - static const struct of_device_id vt8500_ehci_ids[] = { - { .compatible = "via,vt8500-ehci", }, - { .compatible = "wm,prizm-ehci", }, -- { .compatible = "usb-ehci", }, -+ { .compatible = "generic-ehci", }, - {} - }; - MODULE_DEVICE_TABLE(of, vt8500_ehci_ids); --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/180-7-usb-uhci-change-compat-string.patch b/target/linux/sunxi/patches-3.13/180-7-usb-uhci-change-compat-string.patch deleted file mode 100644 index 0b7695ac34..0000000000 --- a/target/linux/sunxi/patches-3.13/180-7-usb-uhci-change-compat-string.patch +++ /dev/null @@ -1,83 +0,0 @@ -From 3aa1e8b65b7db768fade643e26f8995860596795 Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Tue, 11 Feb 2014 17:41:48 +0100 -Subject: [PATCH] uhci-platform: Change compatible string from platform-uhci to - generic-uhci - -This brings the uhci-platform bindings in sync with what we've done for -the ohci- and ehci-platform drivers. As discussed there using platform as a -prefix is a bit weird as the platform bus is a Linux specific thing and -the bindings are supposed to be OS agnostic. - -Note that the old platform-uhci compatible string is kept around for, well, -compatibility reasons. - -While at it rename the bindings txt file to match the name of all the -other ?hci-platform bindings docs. - -Signed-off-by: Hans de Goede ---- - Documentation/devicetree/bindings/usb/platform-uhci.txt | 15 --------------- - Documentation/devicetree/bindings/usb/usb-uhci.txt | 15 +++++++++++++++ - drivers/usb/host/uhci-platform.c | 1 + - 3 files changed, 16 insertions(+), 15 deletions(-) - delete mode 100644 Documentation/devicetree/bindings/usb/platform-uhci.txt - create mode 100644 Documentation/devicetree/bindings/usb/usb-uhci.txt - -diff --git a/Documentation/devicetree/bindings/usb/platform-uhci.txt b/Documentation/devicetree/bindings/usb/platform-uhci.txt -deleted file mode 100644 -index a4fb071..0000000 ---- a/Documentation/devicetree/bindings/usb/platform-uhci.txt -+++ /dev/null -@@ -1,15 +0,0 @@ --Generic Platform UHCI Controller ------------------------------------------------------- -- --Required properties: --- compatible : "platform-uhci" --- reg : Should contain 1 register ranges(address and length) --- interrupts : UHCI controller interrupt -- --Example: -- -- uhci@d8007b00 { -- compatible = "platform-uhci"; -- reg = <0xd8007b00 0x200>; -- interrupts = <43>; -- }; -diff --git a/Documentation/devicetree/bindings/usb/usb-uhci.txt b/Documentation/devicetree/bindings/usb/usb-uhci.txt -new file mode 100644 -index 0000000..2981334 ---- /dev/null -+++ b/Documentation/devicetree/bindings/usb/usb-uhci.txt -@@ -0,0 +1,15 @@ -+Generic Platform UHCI Controller -+----------------------------------------------------- -+ -+Required properties: -+- compatible : "generic-uhci" (deprecated: "platform-uhci") -+- reg : Should contain 1 register ranges(address and length) -+- interrupts : UHCI controller interrupt -+ -+Example: -+ -+ uhci@d8007b00 { -+ compatible = "generic-uhci"; -+ reg = <0xd8007b00 0x200>; -+ interrupts = <43>; -+ }; -diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c -index 44e6c9d..01833ab 100644 ---- a/drivers/usb/host/uhci-platform.c -+++ b/drivers/usb/host/uhci-platform.c -@@ -148,6 +148,7 @@ static void uhci_hcd_platform_shutdown(struct platform_device *op) - } - - static const struct of_device_id platform_uhci_ids[] = { -+ { .compatible = "generic-uhci", }, - { .compatible = "platform-uhci", }, - {} - }; --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/180-8-usb-xhci-change-compat-string.patch b/target/linux/sunxi/patches-3.13/180-8-usb-xhci-change-compat-string.patch deleted file mode 100644 index 03f42f8483..0000000000 --- a/target/linux/sunxi/patches-3.13/180-8-usb-xhci-change-compat-string.patch +++ /dev/null @@ -1,56 +0,0 @@ -From 1f5109503787538c4a5deb3be7da8336951b105b Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Tue, 11 Feb 2014 17:50:51 +0100 -Subject: [PATCH] xhci-platform: Change compatible string from xhci-platform to - generic-xhci - -This brings the xhci-platform bindings in sync with what we've done for -the ohci- and ehci-platform drivers. As discussed there using platform as a -postfix is a bit weird as the platform bus is a Linux specific thing and -the bindings are supposed to be OS agnostic. - -Note that the old xhci-platform compatible string is kept around for, well, -compatibility reasons. - -Signed-off-by: Hans de Goede ---- - Documentation/devicetree/bindings/usb/usb-xhci.txt | 4 ++-- - drivers/usb/host/xhci-plat.c | 1 + - 2 files changed, 3 insertions(+), 2 deletions(-) - -diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt -index 5752df0..90f8f60 100644 ---- a/Documentation/devicetree/bindings/usb/usb-xhci.txt -+++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt -@@ -1,14 +1,14 @@ - USB xHCI controllers - - Required properties: -- - compatible: should be "xhci-platform". -+ - compatible: should be "generic-xhci" (deprecated: "xhci-platform"). - - reg: should contain address and length of the standard XHCI - register set for the device. - - interrupts: one XHCI interrupt should be described here. - - Example: - usb@f0931000 { -- compatible = "xhci-platform"; -+ compatible = "generic-xhci"; - reg = <0xf0931000 0x8c8>; - interrupts = <0x0 0x4e 0x0>; - }; -diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c -index 8abda5c..8affef9 100644 ---- a/drivers/usb/host/xhci-plat.c -+++ b/drivers/usb/host/xhci-plat.c -@@ -226,6 +226,7 @@ static int xhci_plat_resume(struct device *dev) - - #ifdef CONFIG_OF - static const struct of_device_id usb_xhci_of_match[] = { -+ { .compatible = "generic-xhci" }, - { .compatible = "xhci-platform" }, - { }, - }; --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/180-9-clk-sunxi-add-usb-clockreg-reset.patch b/target/linux/sunxi/patches-3.13/180-9-clk-sunxi-add-usb-clockreg-reset.patch deleted file mode 100644 index a31f16b8f8..0000000000 --- a/target/linux/sunxi/patches-3.13/180-9-clk-sunxi-add-usb-clockreg-reset.patch +++ /dev/null @@ -1,127 +0,0 @@ -From edb7ebba49b6946e80dfac0d13ac15028952aa29 Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Thu, 9 Jan 2014 19:33:04 +0100 -Subject: [PATCH] clk: sunxi: Add support for USB clock-register reset bits - -The usb-clk register is special in that it not only contains clk gate bits, -but also has a few reset bits. This commit adds support for this by allowing -gates type sunxi clks to also register a reset controller. - -Signed-off-by: Hans de Goede ---- - drivers/clk/sunxi/clk-sunxi.c | 71 +++++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 71 insertions(+) - -diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c -index 46a38b4..2dbaee7 100644 ---- a/drivers/clk/sunxi/clk-sunxi.c -+++ b/drivers/clk/sunxi/clk-sunxi.c -@@ -18,6 +18,7 @@ - #include - #include - #include -+#include - - #include "clk-factors.h" - -@@ -852,6 +853,59 @@ static void __init sunxi_divider_clk_setup(struct device_node *node, - - - /** -+ * sunxi_gates_reset... - reset bits in leaf gate clk registers handling -+ */ -+ -+struct gates_reset_data { -+ void __iomem *reg; -+ spinlock_t *lock; -+ struct reset_controller_dev rcdev; -+}; -+ -+static int sunxi_gates_reset_assert(struct reset_controller_dev *rcdev, -+ unsigned long id) -+{ -+ struct gates_reset_data *data = container_of(rcdev, -+ struct gates_reset_data, -+ rcdev); -+ unsigned long flags; -+ u32 reg; -+ -+ spin_lock_irqsave(data->lock, flags); -+ -+ reg = readl(data->reg); -+ writel(reg & ~BIT(id), data->reg); -+ -+ spin_unlock_irqrestore(data->lock, flags); -+ -+ return 0; -+} -+ -+static int sunxi_gates_reset_deassert(struct reset_controller_dev *rcdev, -+ unsigned long id) -+{ -+ struct gates_reset_data *data = container_of(rcdev, -+ struct gates_reset_data, -+ rcdev); -+ unsigned long flags; -+ u32 reg; -+ -+ spin_lock_irqsave(data->lock, flags); -+ -+ reg = readl(data->reg); -+ writel(reg | BIT(id), data->reg); -+ -+ spin_unlock_irqrestore(data->lock, flags); -+ -+ return 0; -+} -+ -+static struct reset_control_ops sunxi_gates_reset_ops = { -+ .assert = sunxi_gates_reset_assert, -+ .deassert = sunxi_gates_reset_deassert, -+}; -+ -+/** - * sunxi_gates_clk_setup() - Setup function for leaf gates on clocks - */ - -@@ -859,6 +913,7 @@ static void __init sunxi_divider_clk_setup(struct device_node *node, - - struct gates_data { - DECLARE_BITMAP(mask, SUNXI_GATES_MAX_SIZE); -+ u32 reset_mask; - }; - - static const struct gates_data sun4i_axi_gates_data __initconst = { -@@ -929,6 +984,7 @@ static void __init sunxi_gates_clk_setup(struct device_node *node, - struct gates_data *data) - { - struct clk_onecell_data *clk_data; -+ struct gates_reset_data *reset_data; - const char *clk_parent; - const char *clk_name; - void *reg; -@@ -972,6 +1028,21 @@ static void __init sunxi_gates_clk_setup(struct device_node *node, - clk_data->clk_num = i; - - of_clk_add_provider(node, of_clk_src_onecell_get, clk_data); -+ -+ /* Register a reset controler for gates with reset bits */ -+ if (data->reset_mask == 0) -+ return; -+ -+ reset_data = kzalloc(sizeof(*reset_data), GFP_KERNEL); -+ if (!reset_data) -+ return; -+ -+ reset_data->reg = reg; -+ reset_data->lock = &clk_lock; -+ reset_data->rcdev.nr_resets = __fls(data->reset_mask) + 1; -+ reset_data->rcdev.ops = &sunxi_gates_reset_ops; -+ reset_data->rcdev.of_node = node; -+ reset_controller_register(&reset_data->rcdev); - } - - --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/180-a-clk-sunxi-add-usb-clockreg-defs.patch b/target/linux/sunxi/patches-3.13/180-a-clk-sunxi-add-usb-clockreg-defs.patch deleted file mode 100644 index 4302c0e5bb..0000000000 --- a/target/linux/sunxi/patches-3.13/180-a-clk-sunxi-add-usb-clockreg-defs.patch +++ /dev/null @@ -1,50 +0,0 @@ -From a6459be451bc7eb541aca2be3b36b06955d06622 Mon Sep 17 00:00:00 2001 -From: Roman Byshko -Date: Thu, 19 Sep 2013 21:59:32 +0200 -Subject: [PATCH] clk: sunxi: Add USB clock register defintions - -Add register definitions for the usb-clk register found on sun4i, sun5i and -sun7i SoCs. - -Signed-off-by: Roman Byshko -Signed-off-by: Hans de Goede ---- - Documentation/devicetree/bindings/clock/sunxi.txt | 5 +++++ - drivers/clk/sunxi/clk-sunxi.c | 12 ++++++++++++ - 2 files changed, 17 insertions(+) - -diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt -index 0da774c..c77a5b8 100644 -diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c -index 2dbaee7..9daa9b0 100644 ---- a/drivers/clk/sunxi/clk-sunxi.c -+++ b/drivers/clk/sunxi/clk-sunxi.c -@@ -924,6 +924,16 @@ struct gates_data { - .mask = {0x7F77FFF, 0x14FB3F}, - }; - -+static const struct gates_data sun4i_a10_usb_gates_data __initconst = { -+ .mask = {0x1C0}, -+ .reset_mask = 0x07, -+}; -+ -+static const struct gates_data sun5i_a13_usb_gates_data __initconst = { -+ .mask = {0x140}, -+ .reset_mask = 0x03, -+}; -+ - static const struct gates_data sun5i_a10s_ahb_gates_data __initconst = { - .mask = {0x147667e7, 0x185915}, - }; -@@ -1271,6 +1281,8 @@ static void __init sunxi_divs_clk_setup(struct device_node *node, - {.compatible = "allwinner,sun6i-a31-apb1-gates-clk", .data = &sun6i_a31_apb1_gates_data,}, - {.compatible = "allwinner,sun7i-a20-apb1-gates-clk", .data = &sun7i_a20_apb1_gates_data,}, - {.compatible = "allwinner,sun6i-a31-apb2-gates-clk", .data = &sun6i_a31_apb2_gates_data,}, -+ {.compatible = "allwinner,sun4i-a10-usb-clk", .data = &sun4i_a10_usb_gates_data,}, -+ {.compatible = "allwinner,sun5i-a13-usb-clk", .data = &sun5i_a13_usb_gates_data,}, - {} - }; - --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/181-1-dt-sun4i-add-vbus-reg-dtsi.patch b/target/linux/sunxi/patches-3.13/181-1-dt-sun4i-add-vbus-reg-dtsi.patch deleted file mode 100644 index c3693a7e8f..0000000000 --- a/target/linux/sunxi/patches-3.13/181-1-dt-sun4i-add-vbus-reg-dtsi.patch +++ /dev/null @@ -1,79 +0,0 @@ -From c3593cc95c240663bd9c191c1029237e467575af Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Fri, 7 Feb 2014 18:08:03 +0100 -Subject: [PATCH] ARM: sun4i: dt: Add sun4i-a10-usb-vbus-reg dts include file - -Almost all sun4i and sun7i boards have a gpio controlled vbus for usb1 and -usb2, using gpio pin PH6 and PH3 as in the reference design. This commit adds -an include file for this, avoiding the need to copy and paste the exact same -dts code to almost all sun4i and sun7i dts files. - -Signed-off-by: Hans de Goede ---- - arch/arm/boot/dts/sun4i-a10-usb-vbus-reg.dtsi | 54 +++++++++++++++++++++++++++ - 1 file changed, 54 insertions(+) - create mode 100644 arch/arm/boot/dts/sun4i-a10-usb-vbus-reg.dtsi - -diff --git a/arch/arm/boot/dts/sun4i-a10-usb-vbus-reg.dtsi b/arch/arm/boot/dts/sun4i-a10-usb-vbus-reg.dtsi -new file mode 100644 -index 0000000..803be0c ---- /dev/null -+++ b/arch/arm/boot/dts/sun4i-a10-usb-vbus-reg.dtsi -@@ -0,0 +1,54 @@ -+/* -+ * sun4i boards usb vbus supply common code -+ * -+ * Copyright 2014 - Hans de Goede -+ * -+ * The code contained herein is licensed under the GNU General Public -+ * License. You may obtain a copy of the GNU General Public License -+ * Version 2 or later at the following locations: -+ * -+ * http://www.opensource.org/licenses/gpl-license.html -+ * http://www.gnu.org/copyleft/gpl.html -+ */ -+ -+/ { -+ soc@01c00000 { -+ pio: pinctrl@01c20800 { -+ usb1_vbus_pin_a: usb1_vbus_pin@0 { -+ allwinner,pins = "PH6"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ usb2_vbus_pin_a: usb2_vbus_pin@0 { -+ allwinner,pins = "PH3"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ }; -+ }; -+ -+ reg_usb1_vbus: usb1-vbus { -+ compatible = "regulator-fixed"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&usb1_vbus_pin_a>; -+ regulator-name = "usb1-vbus"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ enable-active-high; -+ gpio = <&pio 7 6 0>; -+ }; -+ -+ reg_usb2_vbus: usb2-vbus { -+ compatible = "regulator-fixed"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&usb2_vbus_pin_a>; -+ regulator-name = "usb2-vbus"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ enable-active-high; -+ gpio = <&pio 7 3 0>; -+ }; -+}; --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/181-2-dt-sun5i-add-vbus-reg-dtsi.patch b/target/linux/sunxi/patches-3.13/181-2-dt-sun5i-add-vbus-reg-dtsi.patch deleted file mode 100644 index e6d4f27d73..0000000000 --- a/target/linux/sunxi/patches-3.13/181-2-dt-sun5i-add-vbus-reg-dtsi.patch +++ /dev/null @@ -1,95 +0,0 @@ -From d11b47592e6af40fff595900c2af30774ee0b88e Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Sun, 9 Feb 2014 14:17:28 +0100 -Subject: [PATCH] ARM: sun5i: dt: Add sun5i-a1*-usb-vbus-reg dts include files - -Almost all sun5i-a10s boards have a gpio controlled vbus for usb1 using gpio -pin PB10 as in the reference design. This commit adds an include file for this, -avoiding the need to copy and paste the dts code. - -For sun5i-a13 based board the reference design uses a gpio on the pmic, which -we don't support yet. Still for consistency with all the other dts files also -add a sun5i-a13-usb-vbus-reg.dtsi files, without a gpio reference for now. - -Signed-off-by: Hans de Goede ---- - arch/arm/boot/dts/sun5i-a10s-usb-vbus-reg.dtsi | 36 ++++++++++++++++++++++++++ - arch/arm/boot/dts/sun5i-a13-usb-vbus-reg.dtsi | 23 ++++++++++++++++ - 2 files changed, 59 insertions(+) - create mode 100644 arch/arm/boot/dts/sun5i-a10s-usb-vbus-reg.dtsi - create mode 100644 arch/arm/boot/dts/sun5i-a13-usb-vbus-reg.dtsi - -diff --git a/arch/arm/boot/dts/sun5i-a10s-usb-vbus-reg.dtsi b/arch/arm/boot/dts/sun5i-a10s-usb-vbus-reg.dtsi -new file mode 100644 -index 0000000..bb1a693 ---- /dev/null -+++ b/arch/arm/boot/dts/sun5i-a10s-usb-vbus-reg.dtsi -@@ -0,0 +1,36 @@ -+/* -+ * sun5i a10s boards usb vbus supply common code -+ * -+ * Copyright 2014 - Hans de Goede -+ * -+ * The code contained herein is licensed under the GNU General Public -+ * License. You may obtain a copy of the GNU General Public License -+ * Version 2 or later at the following locations: -+ * -+ * http://www.opensource.org/licenses/gpl-license.html -+ * http://www.gnu.org/copyleft/gpl.html -+ */ -+ -+/ { -+ soc@01c00000 { -+ pio: pinctrl@01c20800 { -+ usb1_vbus_pin_a: usb1_vbus_pin@0 { -+ allwinner,pins = "PB10"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ }; -+ }; -+ -+ reg_usb1_vbus: usb1-vbus { -+ compatible = "regulator-fixed"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&usb1_vbus_pin_a>; -+ regulator-name = "usb1-vbus"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ enable-active-high; -+ gpio = <&pio 1 10 0>; -+ }; -+}; -diff --git a/arch/arm/boot/dts/sun5i-a13-usb-vbus-reg.dtsi b/arch/arm/boot/dts/sun5i-a13-usb-vbus-reg.dtsi -new file mode 100644 -index 0000000..4d70b9a ---- /dev/null -+++ b/arch/arm/boot/dts/sun5i-a13-usb-vbus-reg.dtsi -@@ -0,0 +1,23 @@ -+/* -+ * sun5i a13 boards usb vbus supply common code -+ * -+ * Copyright 2014 - Hans de Goede -+ * -+ * The code contained herein is licensed under the GNU General Public -+ * License. You may obtain a copy of the GNU General Public License -+ * Version 2 or later at the following locations: -+ * -+ * http://www.opensource.org/licenses/gpl-license.html -+ * http://www.gnu.org/copyleft/gpl.html -+ */ -+ -+/ { -+ reg_usb1_vbus: usb1-vbus { -+ compatible = "regulator-fixed"; -+ pinctrl-names = "default"; -+ regulator-name = "usb1-vbus"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ enable-active-high; -+ }; -+}; --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/182-usb-add-ehci-driver.patch b/target/linux/sunxi/patches-3.13/182-usb-add-ehci-driver.patch deleted file mode 100644 index 4c62640de4..0000000000 --- a/target/linux/sunxi/patches-3.13/182-usb-add-ehci-driver.patch +++ /dev/null @@ -1,420 +0,0 @@ -From ac74dd1167924c412498a651edda63df49941f10 Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Sat, 4 Jan 2014 23:56:17 +0100 -Subject: [PATCH] ARM: sunxi: Add driver for sunxi usb phy - -The Allwinner A1x / A2x SoCs have 2 or 3 usb phys which are all accessed -through a single set of registers. Besides this there are also some other -phy related bits which need poking, which are per phy, but shared between the -ohci and ehci controllers, so these are also controlled from this new phy -driver. - -Signed-off-by: Hans de Goede ---- - .../devicetree/bindings/phy/sun4i-usb-phy.txt | 26 ++ - drivers/phy/Kconfig | 11 + - drivers/phy/Makefile | 1 + - drivers/phy/phy-sun4i-usb.c | 329 +++++++++++++++++++++ - 4 files changed, 367 insertions(+) - create mode 100644 Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt - create mode 100644 drivers/phy/phy-sun4i-usb.c - -diff --git a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt -new file mode 100644 -index 0000000..a82361b ---- /dev/null -+++ b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt -@@ -0,0 +1,26 @@ -+Allwinner sun4i USB PHY -+----------------------- -+ -+Required properties: -+- compatible : should be one of "allwinner,sun4i-a10-usb-phy", -+ "allwinner,sun5i-a13-usb-phy" or "allwinner,sun7i-a20-usb-phy" -+- reg : a list of offset + length pairs -+- reg-names : "phy_ctrl", "pmu1" and for sun4i or sun7i "pmu2" -+- #phy-cells : from the generic phy bindings, must be 1 -+- clocks : phandle + clock specifier for the phy clock -+- clock-names : "usb_phy" -+- resets : a list of phandle + reset specifier pairs -+- reset-names : "usb0_reset", "usb1_reset" and for sun4i or sun7i "usb2_reset" -+ -+Example: -+ usbphy: phy@0x01c13400 { -+ #phy-cells = <1>; -+ compatible = "allwinner,sun4i-a10-usb-phy"; -+ /* phy base regs, phy1 pmu reg, phy2 pmu reg */ -+ reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>; -+ reg-names = "phy_ctrl", "pmu1", "pmu2"; -+ clocks = <&usb_clk 8>; -+ clock-names = "usb_phy"; -+ resets = <&usb_clk 1>, <&usb_clk 2>; -+ reset-names = "usb1_reset", "usb2_reset"; -+ }; -diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig -index 4ef8755..6e336b4 100644 ---- a/drivers/phy/Kconfig -+++ b/drivers/phy/Kconfig -@@ -64,4 +64,15 @@ config BCM_KONA_USB2_PHY - help - Enable this to support the Broadcom Kona USB 2.0 PHY. - -+config PHY_SUN4I_USB -+ tristate "Allwinner sunxi SoC USB PHY driver" -+ depends on ARCH_SUNXI -+ select GENERIC_PHY -+ help -+ Enable this to support the transceiver that is part of Allwinner -+ sunxi SoCs. -+ -+ This driver controls the entire USB PHY block, both the USB OTG -+ parts, as well as the 2 regular USB 2 host PHYs. -+ - endmenu -diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile -index b57c253..9d4f8bb 100644 ---- a/drivers/phy/Makefile -+++ b/drivers/phy/Makefile -@@ -9,3 +9,4 @@ obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o - obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o - obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o - obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o -+obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o -diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c -new file mode 100644 -index 0000000..31c4611 ---- /dev/null -+++ b/drivers/phy/phy-sun4i-usb.c -@@ -0,0 +1,329 @@ -+/* -+ * Allwinner sun4i USB phy driver -+ * -+ * Copyright (C) 2014 Hans de Goede -+ * -+ * Based on code from -+ * Allwinner Technology Co., Ltd. -+ * -+ * Modelled after: Samsung S5P/EXYNOS SoC series MIPI CSIS/DSIM DPHY driver -+ * Copyright (C) 2013 Samsung Electronics Co., Ltd. -+ * Author: Sylwester Nawrocki -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define REG_ISCR 0x00 -+#define REG_PHYCTL 0x04 -+#define REG_PHYBIST 0x08 -+#define REG_PHYTUNE 0x0c -+ -+#define SUNXI_AHB_ICHR8_EN BIT(10) -+#define SUNXI_AHB_INCR4_BURST_EN BIT(9) -+#define SUNXI_AHB_INCRX_ALIGN_EN BIT(8) -+#define SUNXI_ULPI_BYPASS_EN BIT(0) -+ -+/* Common Control Bits for Both PHYs */ -+#define PHY_PLL_BW 0x03 -+#define PHY_RES45_CAL_EN 0x0c -+ -+/* Private Control Bits for Each PHY */ -+#define PHY_TX_AMPLITUDE_TUNE 0x20 -+#define PHY_TX_SLEWRATE_TUNE 0x22 -+#define PHY_VBUSVALID_TH_SEL 0x25 -+#define PHY_PULLUP_RES_SEL 0x27 -+#define PHY_OTG_FUNC_EN 0x28 -+#define PHY_VBUS_DET_EN 0x29 -+#define PHY_DISCON_TH_SEL 0x2a -+ -+#define MAX_PHYS 3 -+ -+struct sun4i_usb_phy_data { -+ struct clk *clk; -+ void __iomem *base; -+ struct mutex mutex; -+ int num_phys; -+ u32 disc_thresh; -+ struct sun4i_usb_phy { -+ struct phy *phy; -+ void __iomem *pmu; -+ struct regulator *vbus; -+ struct reset_control *reset; -+ int index; -+ } phys[MAX_PHYS]; -+}; -+ -+#define to_sun4i_usb_phy_data(phy) \ -+ container_of((phy), struct sun4i_usb_phy_data, phys[(phy)->index]) -+ -+static void sun4i_usb_phy_write(struct sun4i_usb_phy *phy, u32 addr, u32 data, -+ int len) -+{ -+ struct sun4i_usb_phy_data *phy_data = to_sun4i_usb_phy_data(phy); -+ u32 temp, usbc_bit = BIT(phy->index * 2); -+ int i; -+ -+ mutex_lock(&phy_data->mutex); -+ -+ for (i = 0; i < len; i++) { -+ temp = readl(phy_data->base + REG_PHYCTL); -+ -+ /* clear the address portion */ -+ temp &= ~(0xff << 8); -+ -+ /* set the address */ -+ temp |= ((addr + i) << 8); -+ writel(temp, phy_data->base + REG_PHYCTL); -+ -+ /* set the data bit and clear usbc bit*/ -+ temp = readb(phy_data->base + REG_PHYCTL); -+ if (data & 0x1) -+ temp |= BIT(7); -+ else -+ temp &= ~BIT(7); -+ temp &= ~usbc_bit; -+ writeb(temp, phy_data->base + REG_PHYCTL); -+ -+ /* pulse usbc_bit */ -+ temp = readb(phy_data->base + REG_PHYCTL); -+ temp |= usbc_bit; -+ writeb(temp, phy_data->base + REG_PHYCTL); -+ -+ temp = readb(phy_data->base + REG_PHYCTL); -+ temp &= ~usbc_bit; -+ writeb(temp, phy_data->base + REG_PHYCTL); -+ -+ data >>= 1; -+ } -+ mutex_unlock(&phy_data->mutex); -+} -+ -+static void sun4i_usb_phy_passby(struct sun4i_usb_phy *phy, int enable) -+{ -+ u32 bits, reg_value; -+ -+ if (!phy->pmu) -+ return; -+ -+ bits = SUNXI_AHB_ICHR8_EN | SUNXI_AHB_INCR4_BURST_EN | -+ SUNXI_AHB_INCRX_ALIGN_EN | SUNXI_ULPI_BYPASS_EN; -+ -+ reg_value = readl(phy->pmu); -+ -+ if (enable) -+ reg_value |= bits; -+ else -+ reg_value &= ~bits; -+ -+ writel(reg_value, phy->pmu); -+} -+ -+static int sun4i_usb_phy_init(struct phy *_phy) -+{ -+ struct sun4i_usb_phy *phy = phy_get_drvdata(_phy); -+ struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy); -+ int ret; -+ -+ ret = clk_prepare_enable(data->clk); -+ if (ret) -+ return ret; -+ -+ ret = reset_control_deassert(phy->reset); -+ if (ret) { -+ clk_disable_unprepare(data->clk); -+ return ret; -+ } -+ -+ /* Adjust PHY's magnitude and rate */ -+ sun4i_usb_phy_write(phy, PHY_TX_AMPLITUDE_TUNE, 0x14, 5); -+ -+ /* Disconnect threshold adjustment */ -+ sun4i_usb_phy_write(phy, PHY_DISCON_TH_SEL, data->disc_thresh, 2); -+ -+ sun4i_usb_phy_passby(phy, 1); -+ -+ return 0; -+} -+ -+static int sun4i_usb_phy_exit(struct phy *_phy) -+{ -+ struct sun4i_usb_phy *phy = phy_get_drvdata(_phy); -+ struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy); -+ -+ sun4i_usb_phy_passby(phy, 0); -+ reset_control_assert(phy->reset); -+ clk_disable_unprepare(data->clk); -+ -+ return 0; -+} -+ -+static int sun4i_usb_phy_power_on(struct phy *_phy) -+{ -+ struct sun4i_usb_phy *phy = phy_get_drvdata(_phy); -+ int ret = 0; -+ -+ if (phy->vbus) -+ ret = regulator_enable(phy->vbus); -+ -+ return ret; -+} -+ -+static int sun4i_usb_phy_power_off(struct phy *_phy) -+{ -+ struct sun4i_usb_phy *phy = phy_get_drvdata(_phy); -+ -+ if (phy->vbus) -+ regulator_disable(phy->vbus); -+ -+ return 0; -+} -+ -+static struct phy_ops sun4i_usb_phy_ops = { -+ .init = sun4i_usb_phy_init, -+ .exit = sun4i_usb_phy_exit, -+ .power_on = sun4i_usb_phy_power_on, -+ .power_off = sun4i_usb_phy_power_off, -+ .owner = THIS_MODULE, -+}; -+ -+static struct phy *sun4i_usb_phy_xlate(struct device *dev, -+ struct of_phandle_args *args) -+{ -+ struct sun4i_usb_phy_data *data = dev_get_drvdata(dev); -+ -+ if (WARN_ON(args->args[0] == 0 || args->args[0] >= data->num_phys)) -+ return ERR_PTR(-ENODEV); -+ -+ return data->phys[args->args[0]].phy; -+} -+ -+static int sun4i_usb_phy_probe(struct platform_device *pdev) -+{ -+ struct sun4i_usb_phy_data *data; -+ struct device *dev = &pdev->dev; -+ struct device_node *np = dev->of_node; -+ void __iomem *pmu = NULL; -+ struct phy_provider *phy_provider; -+ struct reset_control *reset; -+ struct regulator *vbus; -+ struct resource *res; -+ struct phy *phy; -+ char name[16]; -+ int i; -+ -+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); -+ if (!data) -+ return -ENOMEM; -+ -+ mutex_init(&data->mutex); -+ -+ if (of_device_is_compatible(np, "allwinner,sun5i-a13-usb-phy")) -+ data->num_phys = 2; -+ else -+ data->num_phys = 3; -+ -+ if (of_device_is_compatible(np, "allwinner,sun4i-a10-usb-phy")) -+ data->disc_thresh = 3; -+ else -+ data->disc_thresh = 2; -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy_ctrl"); -+ data->base = devm_ioremap_resource(dev, res); -+ if (IS_ERR(data->base)) -+ return PTR_ERR(data->base); -+ -+ data->clk = devm_clk_get(dev, "usb_phy"); -+ if (IS_ERR(data->clk)) { -+ dev_err(dev, "could not get usb_phy clock\n"); -+ return PTR_ERR(data->clk); -+ } -+ -+ /* Skip 0, 0 is the phy for otg which is not yet supported. */ -+ for (i = 1; i < data->num_phys; i++) { -+ snprintf(name, sizeof(name), "usb%d_vbus", i); -+ vbus = devm_regulator_get_optional(dev, name); -+ if (IS_ERR(vbus)) { -+ if (PTR_ERR(vbus) == -EPROBE_DEFER) -+ return -EPROBE_DEFER; -+ vbus = NULL; -+ } -+ -+ snprintf(name, sizeof(name), "usb%d_reset", i); -+ reset = devm_reset_control_get(dev, name); -+ if (IS_ERR(reset)) { -+ dev_err(dev, "failed to get reset %s\n", name); -+ return PTR_ERR(phy); -+ } -+ -+ if (i) { /* No pmu for usbc0 */ -+ snprintf(name, sizeof(name), "pmu%d", i); -+ res = platform_get_resource_byname(pdev, -+ IORESOURCE_MEM, name); -+ pmu = devm_ioremap_resource(dev, res); -+ if (IS_ERR(pmu)) -+ return PTR_ERR(pmu); -+ } -+ -+ phy = devm_phy_create(dev, &sun4i_usb_phy_ops, NULL); -+ if (IS_ERR(phy)) { -+ dev_err(dev, "failed to create PHY %d\n", i); -+ return PTR_ERR(phy); -+ } -+ -+ data->phys[i].phy = phy; -+ data->phys[i].pmu = pmu; -+ data->phys[i].vbus = vbus; -+ data->phys[i].reset = reset; -+ data->phys[i].index = i; -+ phy_set_drvdata(phy, &data->phys[i]); -+ } -+ -+ dev_set_drvdata(dev, data); -+ phy_provider = devm_of_phy_provider_register(dev, sun4i_usb_phy_xlate); -+ if (IS_ERR(phy_provider)) -+ return PTR_ERR(phy_provider); -+ -+ return 0; -+} -+ -+static const struct of_device_id sun4i_usb_phy_of_match[] = { -+ { .compatible = "allwinner,sun4i-a10-usb-phy" }, -+ { .compatible = "allwinner,sun5i-a13-usb-phy" }, -+ { .compatible = "allwinner,sun7i-a20-usb-phy" }, -+ { }, -+}; -+MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match); -+ -+static struct platform_driver sun4i_usb_phy_driver = { -+ .probe = sun4i_usb_phy_probe, -+ .driver = { -+ .of_match_table = sun4i_usb_phy_of_match, -+ .name = "sun4i-usb-phy", -+ .owner = THIS_MODULE, -+ } -+}; -+module_platform_driver(sun4i_usb_phy_driver); -+ -+MODULE_DESCRIPTION("Allwinner sun4i USB phy driver"); -+MODULE_AUTHOR("Hans de Goede "); -+MODULE_LICENSE("GPL v2"); --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/183-1-dt-sun4i-add-usbclock-nodes.patch b/target/linux/sunxi/patches-3.13/183-1-dt-sun4i-add-usbclock-nodes.patch deleted file mode 100644 index f0f5b92b7d..0000000000 --- a/target/linux/sunxi/patches-3.13/183-1-dt-sun4i-add-usbclock-nodes.patch +++ /dev/null @@ -1,34 +0,0 @@ -From a6ff9c88c09c81cb612f2588a5bfbde21bdcbf7b Mon Sep 17 00:00:00 2001 -From: Roman Byshko -Date: Thu, 19 Sep 2013 21:58:47 +0200 -Subject: [PATCH] ARM: sun4i: dt: Add bindings for USB clocks - -Signed-off-by: Roman Byshko -Signed-off-by: Hans de Goede ---- - arch/arm/boot/dts/sun4i-a10.dtsi | 9 +++++++++ - 1 file changed, 9 insertions(+) - -diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi -index 1a9ab7e..7550c4e 100644 ---- a/arch/arm/boot/dts/sun4i-a10.dtsi -+++ b/arch/arm/boot/dts/sun4i-a10.dtsi -@@ -307,6 +307,15 @@ - clock-output-names = "ir1"; - }; - -+ usb_clk: clk@01c200cc { -+ #clock-cells = <1>; -+ #reset-cells = <1>; -+ compatible = "allwinner,sun4i-a10-usb-clk"; -+ reg = <0x01c200cc 0x4>; -+ clocks = <&pll6 1>; -+ clock-output-names = "usb_ohci0", "usb_ohci1", "usb_phy"; -+ }; -+ - spi3_clk: clk@01c200d4 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-mod0-clk"; --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/183-2-dt-sun4i-add-usb-bindings.patch b/target/linux/sunxi/patches-3.13/183-2-dt-sun4i-add-usb-bindings.patch deleted file mode 100644 index 6a0a1cfadc..0000000000 --- a/target/linux/sunxi/patches-3.13/183-2-dt-sun4i-add-usb-bindings.patch +++ /dev/null @@ -1,86 +0,0 @@ -From f1a981bd49f310775780c221fe92f6861c5e8f3f Mon Sep 17 00:00:00 2001 -From: Roman Byshko -Date: Wed, 18 Sep 2013 00:30:04 +0200 -Subject: [PATCH] ARM: sun4i: dt: Add USB host bindings - -Add nodes for the usb-phy and ehci- and ohci-usb-host controllers. - -Signed-off-by: Roman Byshko -Signed-off-by: Hans de Goede ---- - arch/arm/boot/dts/sun4i-a10.dtsi | 52 ++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 52 insertions(+) - -diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi -index 7550c4e..80bbdeb 100644 ---- a/arch/arm/boot/dts/sun4i-a10.dtsi -+++ b/arch/arm/boot/dts/sun4i-a10.dtsi -@@ -391,6 +391,38 @@ - status = "disabled"; - }; - -+ usbphy: phy@01c13400 { -+ #phy-cells = <1>; -+ compatible = "allwinner,sun4i-a10-usb-phy"; -+ reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>; -+ reg-names = "phy_ctrl", "pmu1", "pmu2"; -+ clocks = <&usb_clk 8>; -+ clock-names = "usb_phy"; -+ resets = <&usb_clk 1>, <&usb_clk 2>; -+ reset-names = "usb1_reset", "usb2_reset"; -+ status = "disabled"; -+ }; -+ -+ ehci0: usb@01c14000 { -+ compatible = "allwinner,sun4i-a10-ehci", "generic-ehci"; -+ reg = <0x01c14000 0x100>; -+ interrupts = <39>; -+ clocks = <&ahb_gates 1>; -+ phys = <&usbphy 1>; -+ phy-names = "usb"; -+ status = "disabled"; -+ }; -+ -+ ohci0: usb@01c14400 { -+ compatible = "allwinner,sun4i-a10-ohci", "generic-ohci"; -+ reg = <0x01c14400 0x100>; -+ interrupts = <64>; -+ clocks = <&usb_clk 6>, <&ahb_gates 2>; -+ phys = <&usbphy 1>; -+ phy-names = "usb"; -+ status = "disabled"; -+ }; -+ - ahci: sata@01c18000 { - compatible = "allwinner,sun4i-a10-ahci"; - reg = <0x01c18000 0x1000>; -@@ -399,6 +431,26 @@ - status = "disabled"; - }; - -+ ehci1: usb@01c1c000 { -+ compatible = "allwinner,sun4i-a10-ehci", "generic-ehci"; -+ reg = <0x01c1c000 0x100>; -+ interrupts = <40>; -+ clocks = <&ahb_gates 3>; -+ phys = <&usbphy 2>; -+ phy-names = "usb"; -+ status = "disabled"; -+ }; -+ -+ ohci1: usb@01c1c400 { -+ compatible = "allwinner,sun4i-a10-ohci", "generic-ohci"; -+ reg = <0x01c1c400 0x100>; -+ interrupts = <65>; -+ clocks = <&usb_clk 7>, <&ahb_gates 4>; -+ phys = <&usbphy 2>; -+ phy-names = "usb"; -+ status = "disabled"; -+ }; -+ - intc: interrupt-controller@01c20400 { - compatible = "allwinner,sun4i-ic"; - reg = <0x01c20400 0x400>; --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/183-3-dt-sun4i-add-ehci-cubieboard.patch b/target/linux/sunxi/patches-3.13/183-3-dt-sun4i-add-ehci-cubieboard.patch deleted file mode 100644 index 85483f280d..0000000000 --- a/target/linux/sunxi/patches-3.13/183-3-dt-sun4i-add-ehci-cubieboard.patch +++ /dev/null @@ -1,62 +0,0 @@ -From d2afb2629087ab17d87d605d4b7f49da3a85f1b1 Mon Sep 17 00:00:00 2001 -From: Roman Byshko -Date: Wed, 18 Sep 2013 22:45:06 +0200 -Subject: [PATCH] ARM: sun4i: dt: Add USB host nodes to cubieboard dts - -Add nodes for the usb-phy and ehci- and ohci-usb-host controllers. - -Signed-off-by: Roman Byshko -Signed-off-by: Hans de Goede ---- - arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 23 +++++++++++++++++++++++ - 1 file changed, 23 insertions(+) - -diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts -index ef85b8e..57d2c9c 100644 ---- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts -+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts -@@ -13,6 +13,7 @@ - /dts-v1/; - /include/ "sun4i-a10.dtsi" - /include/ "sunxi-ahci-reg.dtsi" -+/include/ "sun4i-a10-usb-vbus-reg.dtsi" - - / { - model = "Cubietech Cubieboard"; -@@ -42,11 +43,33 @@ - status = "okay"; - }; - -+ usbphy: phy@01c13400 { -+ usb1_vbus-supply = <®_usb1_vbus>; -+ usb2_vbus-supply = <®_usb2_vbus>; -+ status = "okay"; -+ }; -+ -+ ehci0: usb@01c14000 { -+ status = "okay"; -+ }; -+ -+ ohci0: usb@01c14400 { -+ status = "okay"; -+ }; -+ - ahci: sata@01c18000 { - target-supply = <®_ahci_5v>; - status = "okay"; - }; - -+ ehci1: usb@01c1c000 { -+ status = "okay"; -+ }; -+ -+ ohci1: usb@01c1c400 { -+ status = "okay"; -+ }; -+ - pinctrl@01c20800 { - led_pins_cubieboard: led_pins@0 { - allwinner,pins = "PH20", "PH21"; --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/183-4-dt-sun4i-add-ehci-a1000.patch b/target/linux/sunxi/patches-3.13/183-4-dt-sun4i-add-ehci-a1000.patch deleted file mode 100644 index bd85989ed3..0000000000 --- a/target/linux/sunxi/patches-3.13/183-4-dt-sun4i-add-ehci-a1000.patch +++ /dev/null @@ -1,61 +0,0 @@ -From dee94e49177c0bac675d543b16de0f354b0f476a Mon Sep 17 00:00:00 2001 -From: Roman Byshko -Date: Wed, 18 Sep 2013 00:30:40 +0200 -Subject: [PATCH] ARM: sun4i: dt: Add USB host nodes to Mele A1000 dts - -Add nodes for the usb-phy and ehci- and ohci-usb-host controllers. - -Signed-off-by: Roman Byshko -Signed-off-by: Hans de Goede ---- - arch/arm/boot/dts/sun4i-a10-a1000.dts | 23 +++++++++++++++++++++++ - 1 file changed, 23 insertions(+) - -diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts -index 4b2a694..144b8e6 100644 ---- a/arch/arm/boot/dts/sun4i-a10-a1000.dts -+++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts -@@ -13,6 +13,7 @@ - - /dts-v1/; - /include/ "sun4i-a10.dtsi" -+/include/ "sun4i-a10-usb-vbus-reg.dtsi" - - / { - model = "Mele A1000"; -@@ -43,10 +44,32 @@ - status = "okay"; - }; - -+ usbphy: phy@01c13400 { -+ usb1_vbus-supply = <®_usb1_vbus>; -+ usb2_vbus-supply = <®_usb2_vbus>; -+ status = "okay"; -+ }; -+ -+ ehci0: usb@01c14000 { -+ status = "okay"; -+ }; -+ -+ ohci0: usb@01c14400 { -+ status = "okay"; -+ }; -+ - ahci: sata@01c18000 { - status = "okay"; - }; - -+ ehci1: usb@01c1c000 { -+ status = "okay"; -+ }; -+ -+ ohci1: usb@01c1c400 { -+ status = "okay"; -+ }; -+ - pinctrl@01c20800 { - emac_power_pin_a1000: emac_power_pin@0 { - allwinner,pins = "PH15"; --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/184-1-dt-sun7i-add-usbclock-nodes.patch b/target/linux/sunxi/patches-3.13/184-1-dt-sun7i-add-usbclock-nodes.patch deleted file mode 100644 index 2bb2a90df0..0000000000 --- a/target/linux/sunxi/patches-3.13/184-1-dt-sun7i-add-usbclock-nodes.patch +++ /dev/null @@ -1,34 +0,0 @@ -From ebac8eac9b49c914a975c04a62ea5cfc058d958d Mon Sep 17 00:00:00 2001 -From: Roman Byshko -Date: Thu, 19 Sep 2013 21:24:20 +0200 -Subject: [PATCH] ARM: sun7i: dt: Add bindings for USB clocks - -Signed-off-by: Roman Byshko -Signed-off-by: Hans de Goede ---- - arch/arm/boot/dts/sun7i-a20.dtsi | 9 +++++++++ - 1 file changed, 9 insertions(+) - -diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi -index b58ce25..ed9b8cc 100644 ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -297,6 +297,15 @@ - clock-output-names = "ir1"; - }; - -+ usb_clk: clk@01c200cc { -+ #clock-cells = <1>; -+ #reset-cells = <1>; -+ compatible = "allwinner,sun4i-a10-usb-clk"; -+ reg = <0x01c200cc 0x4>; -+ clocks = <&pll6 1>; -+ clock-output-names = "usb_ohci0", "usb_ohci1", "usb_phy"; -+ }; -+ - spi3_clk: clk@01c200d4 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-mod0-clk"; --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/184-2-dt-sun7i-add-usb-bindings.patch b/target/linux/sunxi/patches-3.13/184-2-dt-sun7i-add-usb-bindings.patch deleted file mode 100644 index 1c5ef8b667..0000000000 --- a/target/linux/sunxi/patches-3.13/184-2-dt-sun7i-add-usb-bindings.patch +++ /dev/null @@ -1,86 +0,0 @@ -From bc68c927139d1cac9647c8bcd3e8cea1cac9eaef Mon Sep 17 00:00:00 2001 -From: Roman Byshko -Date: Thu, 19 Sep 2013 21:36:10 +0200 -Subject: [PATCH] ARM: sun7i: dt: Add USB host bindings - -Add nodes for the usb-phy and ehci- and ohci-usb-host controllers. - -Signed-off-by: Roman Byshko -Signed-off-by: Hans de Goede ---- - arch/arm/boot/dts/sun7i-a20.dtsi | 52 ++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 52 insertions(+) - -diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi -index ed9b8cc..bdfa594 100644 ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -453,6 +453,38 @@ - status = "disabled"; - }; - -+ usbphy: phy@01c13400 { -+ #phy-cells = <1>; -+ compatible = "allwinner,sun7i-a20-usb-phy"; -+ reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>; -+ reg-names = "phy_ctrl", "pmu1", "pmu2"; -+ clocks = <&usb_clk 8>; -+ clock-names = "usb_phy"; -+ resets = <&usb_clk 1>, <&usb_clk 2>; -+ reset-names = "usb1_reset", "usb2_reset"; -+ status = "disabled"; -+ }; -+ -+ ehci0: usb@01c14000 { -+ compatible = "allwinner,sun7i-a20-ehci", "generic-ehci"; -+ reg = <0x01c14000 0x100>; -+ interrupts = <0 39 4>; -+ clocks = <&ahb_gates 1>; -+ phys = <&usbphy 1>; -+ phy-names = "usb"; -+ status = "disabled"; -+ }; -+ -+ ohci0: usb@01c14400 { -+ compatible = "allwinner,sun7i-a20-ohci", "generic-ohci"; -+ reg = <0x01c14400 0x100>; -+ interrupts = <0 64 4>; -+ clocks = <&usb_clk 6>, <&ahb_gates 2>; -+ phys = <&usbphy 1>; -+ phy-names = "usb"; -+ status = "disabled"; -+ }; -+ - ahci: sata@01c18000 { - compatible = "allwinner,sun4i-a10-ahci"; - reg = <0x01c18000 0x1000>; -@@ -461,6 +493,26 @@ - status = "disabled"; - }; - -+ ehci1: usb@01c1c000 { -+ compatible = "allwinner,sun7i-a20-ehci", "generic-ehci"; -+ reg = <0x01c1c000 0x100>; -+ interrupts = <0 40 4>; -+ clocks = <&ahb_gates 3>; -+ phys = <&usbphy 2>; -+ phy-names = "usb"; -+ status = "disabled"; -+ }; -+ -+ ohci1: usb@01c1c400 { -+ compatible = "allwinner,sun7i-a20-ohci", "generic-ohci"; -+ reg = <0x01c1c400 0x100>; -+ interrupts = <0 65 4>; -+ clocks = <&usb_clk 7>, <&ahb_gates 4>; -+ phys = <&usbphy 2>; -+ phy-names = "usb"; -+ status = "disabled"; -+ }; -+ - pio: pinctrl@01c20800 { - compatible = "allwinner,sun7i-a20-pinctrl"; - reg = <0x01c20800 0x400>; --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/184-3-dt-sun7i-add-ehci-cubieboard2.patch b/target/linux/sunxi/patches-3.13/184-3-dt-sun7i-add-ehci-cubieboard2.patch deleted file mode 100644 index 7ca9d8ab26..0000000000 --- a/target/linux/sunxi/patches-3.13/184-3-dt-sun7i-add-ehci-cubieboard2.patch +++ /dev/null @@ -1,62 +0,0 @@ -From 5b820d3062a436cf36ddf2fecc88524b9adf7b6e Mon Sep 17 00:00:00 2001 -From: Roman Byshko -Date: Thu, 19 Sep 2013 21:29:45 +0200 -Subject: [PATCH] ARM: sun7i: dt: Add USB host nodes to cubieboard2 dts - -Add nodes for the usb-phy and ehci- and ohci-usb-host controllers. - -Signed-off-by: Roman Byshko -Signed-off-by: Hans de Goede ---- - arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 23 +++++++++++++++++++++++ - 1 file changed, 23 insertions(+) - -diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts -index a8186f5..9fa1d85 100644 ---- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts -+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts -@@ -14,6 +14,7 @@ - /dts-v1/; - /include/ "sun7i-a20.dtsi" - /include/ "sunxi-ahci-reg.dtsi" -+/include/ "sun4i-a10-usb-vbus-reg.dtsi" - - / { - model = "Cubietech Cubieboard2"; -@@ -28,11 +29,33 @@ - status = "okay"; - }; - -+ usbphy: phy@01c13400 { -+ usb1_vbus-supply = <®_usb1_vbus>; -+ usb2_vbus-supply = <®_usb2_vbus>; -+ status = "okay"; -+ }; -+ -+ ehci0: usb@01c14000 { -+ status = "okay"; -+ }; -+ -+ ohci0: usb@01c14400 { -+ status = "okay"; -+ }; -+ - ahci: sata@01c18000 { - target-supply = <®_ahci_5v>; - status = "okay"; - }; - -+ ehci1: usb@01c1c000 { -+ status = "okay"; -+ }; -+ -+ ohci1: usb@01c1c400 { -+ status = "okay"; -+ }; -+ - pinctrl@01c20800 { - led_pins_cubieboard2: led_pins@0 { - allwinner,pins = "PH20", "PH21"; --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/184-4-dt-sun7i-add-ehci-olinuxino-a20-micro.patch b/target/linux/sunxi/patches-3.13/184-4-dt-sun7i-add-ehci-olinuxino-a20-micro.patch deleted file mode 100644 index 11d093639f..0000000000 --- a/target/linux/sunxi/patches-3.13/184-4-dt-sun7i-add-ehci-olinuxino-a20-micro.patch +++ /dev/null @@ -1,61 +0,0 @@ -From 2f2ffd5ea0174434c8214722127e5e977dcecf32 Mon Sep 17 00:00:00 2001 -From: Zalan Blenessy -Date: Sun, 22 Dec 2013 17:08:10 +0100 -Subject: [PATCH] ARM: sun7i: dt: Add USB host nodes to a20-olinuxino-micro dts - -Add nodes for the usb-phy and ehci- and ohci-usb-host controllers. - -Signed-off-by: Hans de Goede ---- - arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 23 +++++++++++++++++++++++ - 1 file changed, 23 insertions(+) - -diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts -index aef289f..824ce0a 100644 ---- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts -+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts -@@ -14,6 +14,7 @@ - /dts-v1/; - /include/ "sun7i-a20.dtsi" - /include/ "sunxi-ahci-reg.dtsi" -+/include/ "sun4i-a10-usb-vbus-reg.dtsi" - #include - - / { -@@ -37,11 +38,33 @@ - status = "okay"; - }; - -+ usbphy: phy@01c13400 { -+ usb1_vbus-supply = <®_usb1_vbus>; -+ usb2_vbus-supply = <®_usb2_vbus>; -+ status = "okay"; -+ }; -+ -+ ehci0: usb@01c14000 { -+ status = "okay"; -+ }; -+ -+ ohci0: usb@01c14400 { -+ status = "okay"; -+ }; -+ - ahci: sata@01c18000 { - target-supply = <®_ahci_5v>; - status = "okay"; - }; - -+ ehci1: usb@01c1c000 { -+ status = "okay"; -+ }; -+ -+ ohci1: usb@01c1c400 { -+ status = "okay"; -+ }; -+ - pinctrl@01c20800 { - mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 { - allwinner,pins = "PH11"; --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/184-5-dt-sun7i-add-ehci-cubietruck.patch b/target/linux/sunxi/patches-3.13/184-5-dt-sun7i-add-ehci-cubietruck.patch deleted file mode 100644 index 7912f2018a..0000000000 --- a/target/linux/sunxi/patches-3.13/184-5-dt-sun7i-add-ehci-cubietruck.patch +++ /dev/null @@ -1,39 +0,0 @@ -diff -ruN old/arch/arm/boot/dts/sun7i-a20-cubietruck.dts new/arch/arm/boot/dts/sun7i-a20-cubietruck.dts ---- old/arch/arm/boot/dts/sun7i-a20-cubietruck.dts 2014-03-18 10:08:24.000000000 +0100 -+++ new/arch/arm/boot/dts/sun7i-a20-cubietruck.dts 2014-03-18 10:27:25.142067751 +0100 -@@ -14,12 +14,35 @@ - /dts-v1/; - /include/ "sun7i-a20.dtsi" - /include/ "sunxi-ahci-reg.dtsi" -+/include/ "sun4i-a10-usb-vbus-reg.dtsi" - - / { - model = "Cubietech Cubietruck"; - compatible = "cubietech,cubietruck", "allwinner,sun7i-a20"; - - soc@01c00000 { -+ usbphy: phy@01c13400 { -+ usb1_vbus-supply = <®_usb1_vbus>; -+ usb2_vbus-supply = <®_usb2_vbus>; -+ status = "okay"; -+ }; -+ -+ ehci0: usb@01c14000 { -+ status = "okay"; -+ }; -+ -+ ohci0: usb@01c14400 { -+ status = "okay"; -+ }; -+ -+ ehci1: usb@01c1c000 { -+ status = "okay"; -+ }; -+ -+ ohci1: usb@01c1c400 { -+ status = "okay"; -+ }; -+ - mmc0: mmc@01c0f000 { - pinctrl-names = "default", "default"; - pinctrl-0 = <&mmc0_pins_a>; diff --git a/target/linux/sunxi/patches-3.13/185-1-dt-sun5i-add-usbclock-nodes.patch b/target/linux/sunxi/patches-3.13/185-1-dt-sun5i-add-usbclock-nodes.patch deleted file mode 100644 index ef7323bbf1..0000000000 --- a/target/linux/sunxi/patches-3.13/185-1-dt-sun5i-add-usbclock-nodes.patch +++ /dev/null @@ -1,55 +0,0 @@ -From 84e5402d6755b0563cfbe1b6b930b13b1c10d56c Mon Sep 17 00:00:00 2001 -From: Roman Byshko -Date: Tue, 24 Sep 2013 20:02:39 +0200 -Subject: [PATCH] ARM: sun5i: dt: Add bindings for USB clocks - -Signed-off-by: Roman Byshko -Signed-off-by: Hans de Goede ---- - arch/arm/boot/dts/sun5i-a10s.dtsi | 9 +++++++++ - arch/arm/boot/dts/sun5i-a13.dtsi | 9 +++++++++ - 2 files changed, 18 insertions(+) - -diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi -index 95cb245..0565040 100644 ---- a/arch/arm/boot/dts/sun5i-a10s.dtsi -+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi -@@ -268,6 +268,15 @@ - clock-output-names = "ir0"; - }; - -+ usb_clk: clk@01c200cc { -+ #clock-cells = <1>; -+ #reset-cells = <1>; -+ compatible = "allwinner,sun5i-a13-usb-clk"; -+ reg = <0x01c200cc 0x4>; -+ clocks = <&pll6 1>; -+ clock-output-names = "usb_ohci0", "usb_phy"; -+ }; -+ - mbus_clk: clk@01c2015c { - #clock-cells = <0>; - compatible = "allwinner,sun4i-mod0-clk"; -diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi -index bae0f5f..785dea5 100644 ---- a/arch/arm/boot/dts/sun5i-a13.dtsi -+++ b/arch/arm/boot/dts/sun5i-a13.dtsi -@@ -266,6 +266,15 @@ - clock-output-names = "ir0"; - }; - -+ usb_clk: clk@01c200cc { -+ #clock-cells = <1>; -+ #reset-cells = <1>; -+ compatible = "allwinner,sun5i-a13-usb-clk"; -+ reg = <0x01c200cc 0x4>; -+ clocks = <&pll6 1>; -+ clock-output-names = "usb_ohci0", "usb_phy"; -+ }; -+ - mbus_clk: clk@01c2015c { - #clock-cells = <0>; - compatible = "allwinner,sun4i-mod0-clk"; --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/185-2-dt-sun5i-add-usb-bindings.patch b/target/linux/sunxi/patches-3.13/185-2-dt-sun5i-add-usb-bindings.patch deleted file mode 100644 index 50dc201a9d..0000000000 --- a/target/linux/sunxi/patches-3.13/185-2-dt-sun5i-add-usb-bindings.patch +++ /dev/null @@ -1,103 +0,0 @@ -From 22f661c548042565ffa32e468267f94cadafe144 Mon Sep 17 00:00:00 2001 -From: Roman Byshko -Date: Tue, 24 Sep 2013 20:03:40 +0200 -Subject: [PATCH] ARM: sun5i: dt: Add USB host bindings - -Add nodes for the usb-phy and ehci- and ohci-usb-host controllers. - -Signed-off-by: Roman Byshko -Signed-off-by: Hans de Goede ---- - arch/arm/boot/dts/sun5i-a10s.dtsi | 32 ++++++++++++++++++++++++++++++++ - arch/arm/boot/dts/sun5i-a13.dtsi | 32 ++++++++++++++++++++++++++++++++ - 2 files changed, 64 insertions(+) - -diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi -index 0565040..a5431ed 100644 ---- a/arch/arm/boot/dts/sun5i-a10s.dtsi -+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi -@@ -341,6 +341,38 @@ - status = "disabled"; - }; - -+ usbphy: phy@01c13400 { -+ #phy-cells = <1>; -+ compatible = "allwinner,sun5i-a13-usb-phy"; -+ reg = <0x01c13400 0x10 0x01c14800 0x4>; -+ reg-names = "phy_ctrl", "pmu1"; -+ clocks = <&usb_clk 8>; -+ clock-names = "usb_phy"; -+ resets = <&usb_clk 1>; -+ reset-names = "usb1_reset"; -+ status = "disabled"; -+ }; -+ -+ ehci0: usb@01c14000 { -+ compatible = "allwinner,sun5i-a10s-ehci", "generic-ehci"; -+ reg = <0x01c14000 0x100>; -+ interrupts = <39>; -+ clocks = <&ahb_gates 1>; -+ phys = <&usbphy 1>; -+ phy-names = "usb"; -+ status = "disabled"; -+ }; -+ -+ ohci0: usb@01c14400 { -+ compatible = "allwinner,sun5i-a10s-ohci", "generic-ohci"; -+ reg = <0x01c14400 0x100>; -+ interrupts = <40>; -+ clocks = <&usb_clk 6>, <&ahb_gates 2>; -+ phys = <&usbphy 1>; -+ phy-names = "usb"; -+ status = "disabled"; -+ }; -+ - intc: interrupt-controller@01c20400 { - compatible = "allwinner,sun4i-ic"; - reg = <0x01c20400 0x400>; -diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi -index 785dea5..7fe9cdc 100644 ---- a/arch/arm/boot/dts/sun5i-a13.dtsi -+++ b/arch/arm/boot/dts/sun5i-a13.dtsi -@@ -312,6 +312,38 @@ - status = "disabled"; - }; - -+ usbphy: phy@01c13400 { -+ #phy-cells = <1>; -+ compatible = "allwinner,sun5i-a13-usb-phy"; -+ reg = <0x01c13400 0x10 0x01c14800 0x4>; -+ reg-names = "phy_ctrl", "pmu1"; -+ clocks = <&usb_clk 8>; -+ clock-names = "usb_phy"; -+ resets = <&usb_clk 1>; -+ reset-names = "usb1_reset"; -+ status = "disabled"; -+ }; -+ -+ ehci0: usb@01c14000 { -+ compatible = "allwinner,sun5i-a13-ehci", "generic-ehci"; -+ reg = <0x01c14000 0x100>; -+ interrupts = <39>; -+ clocks = <&ahb_gates 1>; -+ phys = <&usbphy 1>; -+ phy-names = "usb"; -+ status = "disabled"; -+ }; -+ -+ ohci0: usb@01c14400 { -+ compatible = "allwinner,sun5i-a13-ohci", "generic-ohci"; -+ reg = <0x01c14400 0x100>; -+ interrupts = <40>; -+ clocks = <&usb_clk 6>, <&ahb_gates 2>; -+ phys = <&usbphy 1>; -+ phy-names = "usb"; -+ status = "disabled"; -+ }; -+ - intc: interrupt-controller@01c20400 { - compatible = "allwinner,sun4i-ic"; - reg = <0x01c20400 0x400>; --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/185-3-dt-sun5i-add-ehci-a13.patch b/target/linux/sunxi/patches-3.13/185-3-dt-sun5i-add-ehci-a13.patch deleted file mode 100644 index a664bc0b83..0000000000 --- a/target/linux/sunxi/patches-3.13/185-3-dt-sun5i-add-ehci-a13.patch +++ /dev/null @@ -1,72 +0,0 @@ -From 8bf60620f751f93157c81038527b03716c8aeede Mon Sep 17 00:00:00 2001 -From: Roman Byshko -Date: Tue, 24 Sep 2013 20:07:53 +0200 -Subject: [PATCH] ARM: sun5i: dt: Add USB host nodes to A13-Olinuxino - -Add nodes for the usb-phy and ehci- and ohci-usb-host controllers. - -Signed-off-by: Roman Byshko -Signed-off-by: Hans de Goede ---- - arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 26 ++++++++++++++++++++++++++ - 1 file changed, 26 insertions(+) - -diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts -index ba32a41..39556d1 100644 ---- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts -+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts -@@ -13,6 +13,7 @@ - - /dts-v1/; - /include/ "sun5i-a13.dtsi" -+/include/ "sun5i-a13-usb-vbus-reg.dtsi" - #include - - / { -@@ -28,6 +29,19 @@ - status = "okay"; - }; - -+ usbphy: phy@01c13400 { -+ usb1_vbus-supply = <®_usb1_vbus>; -+ status = "okay"; -+ }; -+ -+ ehci0: usb@01c14000 { -+ status = "okay"; -+ }; -+ -+ ohci0: usb@01c14400 { -+ status = "okay"; -+ }; -+ - pinctrl@01c20800 { - mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 { - allwinner,pins = "PG0"; -@@ -42,6 +56,13 @@ - allwinner,drive = <1>; - allwinner,pull = <0>; - }; -+ -+ usb1_vbus_pin_olinuxino: usb1_vbus_pin@0 { -+ allwinner,pins = "PG11"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; - }; - - lradc: lradc@01c22800 { -@@ -86,4 +107,9 @@ - default-state = "on"; - }; - }; -+ -+ reg_usb1_vbus: usb1-vbus { -+ pinctrl-0 = <&usb1_vbus_pin_olinuxino>; -+ gpio = <&pio 6 11 0>; -+ }; - }; --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/190-sunxi-select-PSCI.patch b/target/linux/sunxi/patches-3.13/190-sunxi-select-PSCI.patch deleted file mode 100644 index a634240f49..0000000000 --- a/target/linux/sunxi/patches-3.13/190-sunxi-select-PSCI.patch +++ /dev/null @@ -1,22 +0,0 @@ -From d46cebc1431948638fe4e6cfd27fb9da48e6c593 Mon Sep 17 00:00:00 2001 -From: Zalan Blenessy -Date: Sun, 22 Dec 2013 17:10:06 +0100 -Subject: [PATCH] ARM: sunxi: select ARM_PSCI - -This is necessary for SMP on sun7i. - -Signed-off-by: Hans de Goede ---- - arch/arm/mach-sunxi/Kconfig | 1 + - 1 file changed, 1 insertion(+) - ---- a/arch/arm/mach-sunxi/Kconfig -+++ b/arch/arm/mach-sunxi/Kconfig -@@ -3,6 +3,7 @@ config ARCH_SUNXI - select ARCH_HAS_RESET_CONTROLLER - select ARCH_REQUIRE_GPIOLIB - select ARM_GIC -+ select ARM_PSCI - select CLKSRC_MMIO - select CLKSRC_OF - select COMMON_CLK diff --git a/target/linux/sunxi/patches-3.13/200-sun5i-timer-add-support-for-reset-ctrler.patch b/target/linux/sunxi/patches-3.13/200-sun5i-timer-add-support-for-reset-ctrler.patch deleted file mode 100644 index 3b5284bc53..0000000000 --- a/target/linux/sunxi/patches-3.13/200-sun5i-timer-add-support-for-reset-ctrler.patch +++ /dev/null @@ -1,62 +0,0 @@ -From 99489f45debd07f6e1cfa36f5c9890409714518d Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Fri, 20 Dec 2013 22:41:08 +0100 -Subject: [PATCH] clocksource: sun5i: Add support for reset controller - -The Allwinner A31 that uses this timer has the timer IP asserted in reset. -Add an optional reset property to the DT, and deassert the timer from reset if -it's there. - -Signed-off-by: Maxime Ripard ---- - .../devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt | 4 ++++ - drivers/clocksource/timer-sun5i.c | 6 ++++++ - 2 files changed, 10 insertions(+) - ---- a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt -+++ b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt -@@ -9,6 +9,9 @@ Required properties: - one) - - clocks: phandle to the source clock (usually the AHB clock) - -+Optionnal properties: -+- resets: phandle to a reset controller asserting the timer -+ - Example: - - timer@01c60000 { -@@ -19,4 +22,5 @@ timer@01c60000 { - <0 53 1>, - <0 54 1>; - clocks = <&ahb1_gates 19>; -+ resets = <&ahb1rst 19>; - }; ---- a/drivers/clocksource/timer-sun5i.c -+++ b/drivers/clocksource/timer-sun5i.c -@@ -16,6 +16,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -143,6 +144,7 @@ static u32 sun5i_timer_sched_read(void) - - static void __init sun5i_timer_init(struct device_node *node) - { -+ struct reset_control *rstc; - unsigned long rate; - struct clk *clk; - int ret, irq; -@@ -162,6 +164,10 @@ static void __init sun5i_timer_init(stru - clk_prepare_enable(clk); - rate = clk_get_rate(clk); - -+ rstc = of_reset_control_get(node, NULL); -+ if (!IS_ERR(rstc)) -+ reset_control_deassert(rstc); -+ - writel(~0, timer_base + TIMER_INTVAL_LO_REG(1)); - writel(TIMER_CTL_ENABLE | TIMER_CTL_RELOAD, - timer_base + TIMER_CTL_REG(1)); diff --git a/target/linux/sunxi/patches-3.13/201-reset-add-of_reset_control_get.patch b/target/linux/sunxi/patches-3.13/201-reset-add-of_reset_control_get.patch deleted file mode 100644 index 2ff47a785e..0000000000 --- a/target/linux/sunxi/patches-3.13/201-reset-add-of_reset_control_get.patch +++ /dev/null @@ -1,112 +0,0 @@ -From 0325b48d6149e131c90ed6ec77458f4d2df73898 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Fri, 20 Dec 2013 22:41:07 +0100 -Subject: [PATCH] reset: Add of_reset_control_get - -In some cases, you might need to deassert from reset an hardware block that -doesn't associated to a struct device (CPUs, timers, etc.). - -Add a small helper to retrieve the reset controller from the device tree -without the need to pass a struct device. - -Signed-off-by: Maxime Ripard ---- - drivers/reset/core.c | 39 ++++++++++++++++++++++++++++++--------- - include/linux/reset.h | 4 ++++ - 2 files changed, 34 insertions(+), 9 deletions(-) - ---- a/drivers/reset/core.c -+++ b/drivers/reset/core.c -@@ -127,15 +127,16 @@ int reset_control_deassert(struct reset_ - EXPORT_SYMBOL_GPL(reset_control_deassert); - - /** -- * reset_control_get - Lookup and obtain a reference to a reset controller. -- * @dev: device to be reset by the controller -+ * of_reset_control_get - Lookup and obtain a reference to a reset controller. -+ * @node: device to be reset by the controller - * @id: reset line name - * - * Returns a struct reset_control or IS_ERR() condition containing errno. - * - * Use of id names is optional. - */ --struct reset_control *reset_control_get(struct device *dev, const char *id) -+struct reset_control *of_reset_control_get(struct device_node *node, -+ const char *id) - { - struct reset_control *rstc = ERR_PTR(-EPROBE_DEFER); - struct reset_controller_dev *r, *rcdev; -@@ -144,13 +145,10 @@ struct reset_control *reset_control_get( - int rstc_id; - int ret; - -- if (!dev) -- return ERR_PTR(-EINVAL); -- - if (id) -- index = of_property_match_string(dev->of_node, -+ index = of_property_match_string(node, - "reset-names", id); -- ret = of_parse_phandle_with_args(dev->of_node, "resets", "#reset-cells", -+ ret = of_parse_phandle_with_args(node, "resets", "#reset-cells", - index, &args); - if (ret) - return ERR_PTR(ret); -@@ -185,12 +183,35 @@ struct reset_control *reset_control_get( - return ERR_PTR(-ENOMEM); - } - -- rstc->dev = dev; - rstc->rcdev = rcdev; - rstc->id = rstc_id; - - return rstc; - } -+EXPORT_SYMBOL_GPL(of_reset_control_get); -+ -+/** -+ * reset_control_get - Lookup and obtain a reference to a reset controller. -+ * @dev: device to be reset by the controller -+ * @id: reset line name -+ * -+ * Returns a struct reset_control or IS_ERR() condition containing errno. -+ * -+ * Use of id names is optional. -+ */ -+struct reset_control *reset_control_get(struct device *dev, const char *id) -+{ -+ struct reset_control *rstc; -+ -+ if (!dev) -+ return ERR_PTR(-EINVAL); -+ -+ rstc = of_reset_control_get(dev->of_node, id); -+ if (!IS_ERR(rstc)) -+ rstc->dev = dev; -+ -+ return rstc; -+} - EXPORT_SYMBOL_GPL(reset_control_get); - - /** ---- a/include/linux/reset.h -+++ b/include/linux/reset.h -@@ -1,6 +1,8 @@ - #ifndef _LINUX_RESET_H_ - #define _LINUX_RESET_H_ - -+#include -+ - struct device; - struct reset_control; - -@@ -8,6 +10,8 @@ int reset_control_reset(struct reset_con - int reset_control_assert(struct reset_control *rstc); - int reset_control_deassert(struct reset_control *rstc); - -+struct reset_control *of_reset_control_get(struct device_node *node, -+ const char *id); - struct reset_control *reset_control_get(struct device *dev, const char *id); - void reset_control_put(struct reset_control *rstc); - struct reset_control *devm_reset_control_get(struct device *dev, const char *id); diff --git a/target/linux/sunxi/patches-3.13/202-reset-rename-compat-prop.patch b/target/linux/sunxi/patches-3.13/202-reset-rename-compat-prop.patch deleted file mode 100644 index 3eb3a5ad08..0000000000 --- a/target/linux/sunxi/patches-3.13/202-reset-rename-compat-prop.patch +++ /dev/null @@ -1,40 +0,0 @@ -From a1c859ab115c043662c2779d2e965bb09a90b8cb Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Tue, 17 Dec 2013 23:57:24 +0100 -Subject: [PATCH] ARM: sunxi-clock-reset: rename compat property - -Signed-off-by: Hans de Goede ---- - arch/arm/boot/dts/sun6i-a31.dtsi | 4 ++-- - drivers/reset/reset-sunxi.c | 2 +- - 2 files changed, 3 insertions(+), 3 deletions(-) - ---- a/arch/arm/boot/dts/sun6i-a31.dtsi -+++ b/arch/arm/boot/dts/sun6i-a31.dtsi -@@ -220,13 +220,13 @@ - - apb1_rst: reset@01c202d0 { - #reset-cells = <1>; -- compatible = "allwinner,sun6i-a31-clock-reset"; -+ compatible = "allwinner,sun4i-clock-reset"; - reg = <0x01c202d0 0x4>; - }; - - apb2_rst: reset@01c202d8 { - #reset-cells = <1>; -- compatible = "allwinner,sun6i-a31-clock-reset"; -+ compatible = "allwinner,sun4i-clock-reset"; - reg = <0x01c202d8 0x4>; - }; - ---- a/drivers/reset/reset-sunxi.c -+++ b/drivers/reset/reset-sunxi.c -@@ -138,7 +138,7 @@ void __init sun6i_reset_init(void) - * device model. - */ - static const struct of_device_id sunxi_reset_dt_ids[] = { -- { .compatible = "allwinner,sun6i-a31-clock-reset", }, -+ { .compatible = "allwinner,sun4i-clock-reset", }, - { /* sentinel */ }, - }; - MODULE_DEVICE_TABLE(of, sunxi_reset_dt_ids); diff --git a/target/linux/sunxi/patches-3.13/210-clk-sunxi-add-a20-output-clk.patch b/target/linux/sunxi/patches-3.13/210-clk-sunxi-add-a20-output-clk.patch deleted file mode 100644 index a087e3b0d3..0000000000 --- a/target/linux/sunxi/patches-3.13/210-clk-sunxi-add-a20-output-clk.patch +++ /dev/null @@ -1,112 +0,0 @@ -From 5ca9eadcb5f5cd9af6f1650029ad64052a1a0b10 Mon Sep 17 00:00:00 2001 -From: Chen-Yu Tsai -Date: Tue, 24 Dec 2013 21:26:17 +0800 -Subject: [PATCH] clk: sunxi: Allwinner A20 output clock support - -This patch adds support for the external clock outputs on the -Allwinner A20 SoC. The clock outputs are similar to "module 0" -type clocks, with different offsets and widths for clock factors. - -Signed-off-by: Chen-Yu Tsai ---- - Documentation/devicetree/bindings/clock/sunxi.txt | 1 + - drivers/clk/sunxi/clk-sunxi.c | 57 +++++++++++++++++++++++ - 2 files changed, 58 insertions(+) - ---- a/Documentation/devicetree/bindings/clock/sunxi.txt -+++ b/Documentation/devicetree/bindings/clock/sunxi.txt -@@ -37,6 +37,7 @@ Required properties: - "allwinner,sun6i-a31-apb2-div-clk" - for the APB2 gates on A31 - "allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31 - "allwinner,sun4i-mod0-clk" - for the module 0 family of clocks -+ "allwinner,sun7i-a20-out-clk" - for the external output clocks - - Required properties for all clocks: - - reg : shall be the control register address for the clock. ---- a/drivers/clk/sunxi/clk-sunxi.c -+++ b/drivers/clk/sunxi/clk-sunxi.c -@@ -396,6 +396,47 @@ void clk_sunxi_mmc_phase_control(struct - - - /** -+ * sun7i_a20_get_out_factors() - calculates m, p factors for CLK_OUT_A/B -+ * CLK_OUT rate is calculated as follows -+ * rate = (parent_rate >> p) / (m + 1); -+ */ -+ -+static void sun7i_a20_get_out_factors(u32 *freq, u32 parent_rate, -+ u8 *n, u8 *k, u8 *m, u8 *p) -+{ -+ u8 div, calcm, calcp; -+ -+ /* These clocks can only divide, so we will never be able to achieve -+ * frequencies higher than the parent frequency */ -+ if (*freq > parent_rate) -+ *freq = parent_rate; -+ -+ div = parent_rate / *freq; -+ -+ if (div < 32) -+ calcp = 0; -+ else if (div / 2 < 32) -+ calcp = 1; -+ else if (div / 4 < 32) -+ calcp = 2; -+ else -+ calcp = 3; -+ -+ calcm = DIV_ROUND_UP(div, 1 << calcp); -+ -+ *freq = (parent_rate >> calcp) / calcm; -+ -+ /* we were called to round the frequency, we can now return */ -+ if (n == NULL) -+ return; -+ -+ *m = calcm - 1; -+ *p = calcp; -+} -+ -+ -+ -+/** - * sunxi_factors_clk_setup() - Setup function for factor clocks - */ - -@@ -455,6 +496,14 @@ static struct clk_factors_config sun4i_m - .pwidth = 2, - }; - -+/* user manual says "n" but it's really "p" */ -+static struct clk_factors_config sun7i_a20_out_config = { -+ .mshift = 8, -+ .mwidth = 5, -+ .pshift = 20, -+ .pwidth = 2, -+}; -+ - static const struct factors_data sun4i_pll1_data __initconst = { - .enable = 31, - .table = &sun4i_pll1_config, -@@ -491,6 +540,13 @@ static const struct factors_data sun4i_m - .getter = sun4i_get_mod0_factors, - }; - -+static const struct factors_data sun7i_a20_out_data __initconst = { -+ .enable = 31, -+ .mux = 24, -+ .table = &sun7i_a20_out_config, -+ .getter = sun7i_a20_get_out_factors, -+}; -+ - static struct clk * __init sunxi_factors_clk_setup(struct device_node *node, - const struct factors_data *data) - { -@@ -998,6 +1054,7 @@ static const struct of_device_id clk_fac - {.compatible = "allwinner,sun5i-a13-ahb-clk", .data = &sun5i_a13_ahb_data,}, - {.compatible = "allwinner,sun4i-apb1-clk", .data = &sun4i_apb1_data,}, - {.compatible = "allwinner,sun4i-mod0-clk", .data = &sun4i_mod0_data,}, -+ {.compatible = "allwinner,sun7i-a20-out-clk", .data = &sun7i_a20_out_data,}, - {} - }; - diff --git a/target/linux/sunxi/patches-3.13/211-pinctrl-sunxi-add-a20-output-clkpin-funcs.patch b/target/linux/sunxi/patches-3.13/211-pinctrl-sunxi-add-a20-output-clkpin-funcs.patch deleted file mode 100644 index feb736ad90..0000000000 --- a/target/linux/sunxi/patches-3.13/211-pinctrl-sunxi-add-a20-output-clkpin-funcs.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 271a35ef6237c3b775aad357969dc75ae5b56988 Mon Sep 17 00:00:00 2001 -From: Chen-Yu Tsai -Date: Tue, 24 Dec 2013 21:26:19 +0800 -Subject: [PATCH] pinctrl: sunxi: Add Allwinner A20 clock output pin functions - -This patch adds the clock output pin functions on the A20. -The 2 pins can output a configurable clock to be used by -external modules. This is used on the CubieTruck, to supply -a 32768 Hz low power clock to the onboard Wifi+BT module. - -Signed-off-by: Chen-Yu Tsai ---- - drivers/pinctrl/pinctrl-sunxi-pins.h | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/drivers/pinctrl/pinctrl-sunxi-pins.h -+++ b/drivers/pinctrl/pinctrl-sunxi-pins.h -@@ -3774,12 +3774,14 @@ static const struct sunxi_desc_pin sun7i - SUNXI_FUNCTION(0x1, "gpio_out"), - SUNXI_FUNCTION(0x2, "spi0"), /* MOSI */ - SUNXI_FUNCTION(0x3, "uart6"), /* TX */ -+ SUNXI_FUNCTION(0x4, "clk_out_a"), /* CLK_OUT_A */ - SUNXI_FUNCTION_IRQ(0x5, 24)), /* EINT24 */ - SUNXI_PIN(SUNXI_PINCTRL_PIN_PI13, - SUNXI_FUNCTION(0x0, "gpio_in"), - SUNXI_FUNCTION(0x1, "gpio_out"), - SUNXI_FUNCTION(0x2, "spi0"), /* MISO */ - SUNXI_FUNCTION(0x3, "uart6"), /* RX */ -+ SUNXI_FUNCTION(0x4, "clk_out_b"), /* CLK_OUT_B */ - SUNXI_FUNCTION_IRQ(0x5, 25)), /* EINT25 */ - SUNXI_PIN(SUNXI_PINCTRL_PIN_PI14, - SUNXI_FUNCTION(0x0, "gpio_in"), diff --git a/target/linux/sunxi/patches-3.13/212-dt-sun7i-add-pinmuxing-for-extclocks.patch b/target/linux/sunxi/patches-3.13/212-dt-sun7i-add-pinmuxing-for-extclocks.patch deleted file mode 100644 index 3dda2946d2..0000000000 --- a/target/linux/sunxi/patches-3.13/212-dt-sun7i-add-pinmuxing-for-extclocks.patch +++ /dev/null @@ -1,38 +0,0 @@ -From f3a50c26f33a4627e5d3e35f80db3f22a5375237 Mon Sep 17 00:00:00 2001 -From: Chen-Yu Tsai -Date: Tue, 24 Dec 2013 21:26:20 +0800 -Subject: [PATCH] ARM: dts: sun7i: Add pin muxing options for clock outputs - -This patch adds the clock output pin options on the A20. -The 2 pins can output a configurable clock to be used by -external modules. This is used on the CubieTruck, to supply -a 32768 Hz low power clock to the onboard Wifi+BT module. - -Signed-off-by: Chen-Yu Tsai ---- - arch/arm/boot/dts/sun7i-a20.dtsi | 14 ++++++++++++++ - 1 file changed, 14 insertions(+) - ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -490,6 +490,20 @@ - allwinner,drive = <3>; - allwinner,pull = <0>; - }; -+ -+ clk_out_a_pins: clk_out_a@0 { -+ allwinner,pins = "PI12"; -+ allwinner,function = "clk_out_a"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ clk_out_b_pins: clk_out_b@0 { -+ allwinner,pins = "PI13"; -+ allwinner,function = "clk_out_b"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; - }; - - sata: ahci@01c18000 { diff --git a/target/linux/sunxi/patches-3.13/220-dt-sun4i-move-aliases-to-dtsi.patch b/target/linux/sunxi/patches-3.13/220-dt-sun4i-move-aliases-to-dtsi.patch deleted file mode 100644 index 6dc1f1c66f..0000000000 --- a/target/linux/sunxi/patches-3.13/220-dt-sun4i-move-aliases-to-dtsi.patch +++ /dev/null @@ -1,62 +0,0 @@ -From 10b302a297aee952949423aaec0749b757f34950 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Sun, 17 Nov 2013 10:03:04 +0100 -Subject: [PATCH] ARM: sun4i: dt: Move the aliases to the DTSI - -The aliases are shared across boards are really belong to the DTSI. -Move them there. - -Signed-off-by: Maxime Ripard ---- - arch/arm/boot/dts/sun4i-a10-a1000.dts | 4 ---- - arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 5 ----- - arch/arm/boot/dts/sun4i-a10.dtsi | 2 ++ - 3 files changed, 2 insertions(+), 9 deletions(-) - -diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts -index eb4d73b..d4b081d 100644 ---- a/arch/arm/boot/dts/sun4i-a10-a1000.dts -+++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts -@@ -18,10 +18,6 @@ - model = "Mele A1000"; - compatible = "mele,a1000", "allwinner,sun4i-a10"; - -- aliases { -- serial0 = &uart0; -- }; -- - soc@01c00000 { - emac: ethernet@01c0b000 { - pinctrl-names = "default"; -diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts -index 425a7db..f1c77e0 100644 ---- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts -+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts -@@ -17,11 +17,6 @@ - model = "Cubietech Cubieboard"; - compatible = "cubietech,a10-cubieboard", "allwinner,sun4i-a10"; - -- aliases { -- serial0 = &uart0; -- serial1 = &uart1; -- }; -- - chosen { - bootargs = "earlyprintk console=ttyS0,115200"; - }; -diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi -index 3ba2b46..0adbbe3 100644 ---- a/arch/arm/boot/dts/sun4i-a10.dtsi -+++ b/arch/arm/boot/dts/sun4i-a10.dtsi -@@ -17,6 +17,8 @@ - - aliases { - ethernet0 = &emac; -+ serial0 = &uart0; -+ serial1 = &uart1; - }; - - cpus { --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/230-dt-sunxi-change-emac-to-new-compats.patch b/target/linux/sunxi/patches-3.13/230-dt-sunxi-change-emac-to-new-compats.patch deleted file mode 100644 index e54627d719..0000000000 --- a/target/linux/sunxi/patches-3.13/230-dt-sunxi-change-emac-to-new-compats.patch +++ /dev/null @@ -1,57 +0,0 @@ -From 4dae1686782d52084893421b89ff1aa61e223aaf Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Sun, 2 Feb 2014 14:49:11 +0100 -Subject: [PATCH] net: ethernet: sunxi: Add new compatibles - -The Allwinner A10 compatibles were following a slightly different compatible -patterns than the rest of the SoCs for historical reasons. Add compatibles -matching the other pattern to the ethernet driver for consistency, and keep the -older one for backward compatibility. - -Signed-off-by: Maxime Ripard -Signed-off-by: David S. Miller ---- - Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt | 5 +++-- - drivers/net/ethernet/allwinner/sun4i-emac.c | 3 +++ - 2 files changed, 6 insertions(+), 2 deletions(-) - -diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt b/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt -index b90bfcd..863d5b81 100644 ---- a/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt -+++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt -@@ -1,7 +1,8 @@ - * Allwinner EMAC ethernet controller - - Required properties: --- compatible: should be "allwinner,sun4i-emac". -+- compatible: should be "allwinner,sun4i-a10-emac" (Deprecated: -+ "allwinner,sun4i-emac") - - reg: address and length of the register set for the device. - - interrupts: interrupt for the device - - phy: A phandle to a phy node defining the PHY address (as the reg -@@ -14,7 +15,7 @@ Optional properties: - Example: - - emac: ethernet@01c0b000 { -- compatible = "allwinner,sun4i-emac"; -+ compatible = "allwinner,sun4i-a10-emac"; - reg = <0x01c0b000 0x1000>; - interrupts = <55>; - clocks = <&ahb_gates 17>; -diff --git a/drivers/net/ethernet/allwinner/sun4i-emac.c b/drivers/net/ethernet/allwinner/sun4i-emac.c -index 0cc2143..511f6ee 100644 ---- a/drivers/net/ethernet/allwinner/sun4i-emac.c -+++ b/drivers/net/ethernet/allwinner/sun4i-emac.c -@@ -929,6 +929,9 @@ static int emac_resume(struct platform_device *dev) - } - - static const struct of_device_id emac_of_match[] = { -+ {.compatible = "allwinner,sun4i-a10-emac",}, -+ -+ /* Deprecated */ - {.compatible = "allwinner,sun4i-emac",}, - {}, - }; --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/231-dt-sunxi-net-phy-add-new-compats.patch b/target/linux/sunxi/patches-3.13/231-dt-sunxi-net-phy-add-new-compats.patch deleted file mode 100644 index fe1b436382..0000000000 --- a/target/linux/sunxi/patches-3.13/231-dt-sunxi-net-phy-add-new-compats.patch +++ /dev/null @@ -1,57 +0,0 @@ -From efe205704fa8435b7bca495138dd2dbd973e0c28 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Sun, 2 Feb 2014 14:49:12 +0100 -Subject: [PATCH] net: phy: sunxi: Add new compatibles - -The Allwinner A10 compatibles were following a slightly different compatible -patterns than the rest of the SoCs for historical reasons. Add compatibles -matching the other pattern to the mdio driver for consistency, and keep the -older one for backward compatibility. - -Signed-off-by: Maxime Ripard -Signed-off-by: David S. Miller ---- - Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt | 5 +++-- - drivers/net/phy/mdio-sun4i.c | 3 +++ - 2 files changed, 6 insertions(+), 2 deletions(-) - -diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt b/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt -index 00b9f9a..4ec5641 100644 ---- a/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt -+++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt -@@ -1,7 +1,8 @@ - * Allwinner A10 MDIO Ethernet Controller interface - - Required properties: --- compatible: should be "allwinner,sun4i-mdio". -+- compatible: should be "allwinner,sun4i-a10-mdio" -+ (Deprecated: "allwinner,sun4i-mdio"). - - reg: address and length of the register set for the device. - - Optional properties: -@@ -9,7 +10,7 @@ Optional properties: - - Example at the SoC level: - mdio@01c0b080 { -- compatible = "allwinner,sun4i-mdio"; -+ compatible = "allwinner,sun4i-a10-mdio"; - reg = <0x01c0b080 0x14>; - #address-cells = <1>; - #size-cells = <0>; -diff --git a/drivers/net/phy/mdio-sun4i.c b/drivers/net/phy/mdio-sun4i.c -index bb88bc7..9367acc 100644 ---- a/drivers/net/phy/mdio-sun4i.c -+++ b/drivers/net/phy/mdio-sun4i.c -@@ -170,6 +170,9 @@ static int sun4i_mdio_remove(struct platform_device *pdev) - } - - static const struct of_device_id sun4i_mdio_dt_ids[] = { -+ { .compatible = "allwinner,sun4i-a10-mdio" }, -+ -+ /* Deprecated */ - { .compatible = "allwinner,sun4i-mdio" }, - { } - }; --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/232-dt-sunxi-change-to-new-net-compats.patch b/target/linux/sunxi/patches-3.13/232-dt-sunxi-change-to-new-net-compats.patch deleted file mode 100644 index 83b6702357..0000000000 --- a/target/linux/sunxi/patches-3.13/232-dt-sunxi-change-to-new-net-compats.patch +++ /dev/null @@ -1,85 +0,0 @@ -From 1c70e099ac80ee779ffac66a6169ad936425fe41 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Sun, 2 Feb 2014 14:49:13 +0100 -Subject: [PATCH] ARM: sunxi: dt: Convert to the new net compatibles - -Switch the device tree to the new compatibles introduced in the ethernet and -mdio drivers to have a common pattern accross all Allwinner SoCs. - -Signed-off-by: Maxime Ripard -Signed-off-by: David S. Miller ---- - arch/arm/boot/dts/sun4i-a10.dtsi | 4 ++-- - arch/arm/boot/dts/sun5i-a10s.dtsi | 4 ++-- - arch/arm/boot/dts/sun7i-a20.dtsi | 4 ++-- - 3 files changed, 6 insertions(+), 6 deletions(-) - -diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi -index 040bb0e..10666ca 100644 ---- a/arch/arm/boot/dts/sun4i-a10.dtsi -+++ b/arch/arm/boot/dts/sun4i-a10.dtsi -@@ -315,7 +315,7 @@ - ranges; - - emac: ethernet@01c0b000 { -- compatible = "allwinner,sun4i-emac"; -+ compatible = "allwinner,sun4i-a10-emac"; - reg = <0x01c0b000 0x1000>; - interrupts = <55>; - clocks = <&ahb_gates 17>; -@@ -323,7 +323,7 @@ - }; - - mdio@01c0b080 { -- compatible = "allwinner,sun4i-mdio"; -+ compatible = "allwinner,sun4i-a10-mdio"; - reg = <0x01c0b080 0x14>; - status = "disabled"; - #address-cells = <1>; -diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi -index ea16054..6496159 100644 ---- a/arch/arm/boot/dts/sun5i-a10s.dtsi -+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi -@@ -278,7 +278,7 @@ - ranges; - - emac: ethernet@01c0b000 { -- compatible = "allwinner,sun4i-emac"; -+ compatible = "allwinner,sun4i-a10-emac"; - reg = <0x01c0b000 0x1000>; - interrupts = <55>; - clocks = <&ahb_gates 17>; -@@ -286,7 +286,7 @@ - }; - - mdio@01c0b080 { -- compatible = "allwinner,sun4i-mdio"; -+ compatible = "allwinner,sun4i-a10-mdio"; - reg = <0x01c0b080 0x14>; - status = "disabled"; - #address-cells = <1>; -diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi -index 119f066..9ff0948 100644 ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -340,7 +340,7 @@ - ranges; - - emac: ethernet@01c0b000 { -- compatible = "allwinner,sun4i-emac"; -+ compatible = "allwinner,sun4i-a10-emac"; - reg = <0x01c0b000 0x1000>; - interrupts = <0 55 4>; - clocks = <&ahb_gates 17>; -@@ -348,7 +348,7 @@ - }; - - mdio@01c0b080 { -- compatible = "allwinner,sun4i-mdio"; -+ compatible = "allwinner,sun4i-a10-mdio"; - reg = <0x01c0b080 0x14>; - status = "disabled"; - #address-cells = <1>; --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/240-1-dt-sun4i-add-missing-serial-aliases.patch b/target/linux/sunxi/patches-3.13/240-1-dt-sun4i-add-missing-serial-aliases.patch deleted file mode 100644 index b4bc637958..0000000000 --- a/target/linux/sunxi/patches-3.13/240-1-dt-sun4i-add-missing-serial-aliases.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 791f631bb8f3feb10871b82015a25a7f40ce68e7 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Thu, 2 Jan 2014 22:05:04 +0100 -Subject: [PATCH] ARM: sun4i: a10: Add missing serial aliases - -Some UART aliases have been defined, but not all of them. Add the remaining -ones to be consistent and to ease the parsing of the DT by the bootloaders. - -Signed-off-by: Maxime Ripard ---- - arch/arm/boot/dts/sun4i-a10.dtsi | 6 ++++++ - 1 file changed, 6 insertions(+) - -diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi -index 10666ca..d9c097c 100644 ---- a/arch/arm/boot/dts/sun4i-a10.dtsi -+++ b/arch/arm/boot/dts/sun4i-a10.dtsi -@@ -19,6 +19,12 @@ - ethernet0 = &emac; - serial0 = &uart0; - serial1 = &uart1; -+ serial2 = &uart2; -+ serial3 = &uart3; -+ serial4 = &uart4; -+ serial5 = &uart5; -+ serial6 = &uart6; -+ serial7 = &uart7; - }; - - cpus { --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/240-2-dt-sun5i-a10s-add-missing-serial-aliases.patch b/target/linux/sunxi/patches-3.13/240-2-dt-sun5i-a10s-add-missing-serial-aliases.patch deleted file mode 100644 index 3f634850b6..0000000000 --- a/target/linux/sunxi/patches-3.13/240-2-dt-sun5i-a10s-add-missing-serial-aliases.patch +++ /dev/null @@ -1,31 +0,0 @@ -From 64c3866d232e6b29862f4773ea97b16f4dad6950 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Thu, 2 Jan 2014 22:05:04 +0100 -Subject: [PATCH] ARM: sun5i: a10s: Add missing serial aliases - -Some UART aliases have been defined, but not all of them. Add the remaining -ones to be consistent and to ease the parsing of the DT by the bootloaders. - -Signed-off-by: Maxime Ripard ---- - arch/arm/boot/dts/sun5i-a10s.dtsi | 4 ++++ - 1 file changed, 4 insertions(+) - -diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi -index 6496159..e00f292 100644 ---- a/arch/arm/boot/dts/sun5i-a10s.dtsi -+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi -@@ -18,6 +18,10 @@ - - aliases { - ethernet0 = &emac; -+ serial0 = &uart0; -+ serial1 = &uart1; -+ serial2 = &uart2; -+ serial3 = &uart3; - }; - - cpus { --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/240-3-dt-sun5i-a13-add-missing-serial-aliases.patch b/target/linux/sunxi/patches-3.13/240-3-dt-sun5i-a13-add-missing-serial-aliases.patch deleted file mode 100644 index a60e497d7b..0000000000 --- a/target/linux/sunxi/patches-3.13/240-3-dt-sun5i-a13-add-missing-serial-aliases.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 0cc774ef2524ec54e9d2db8771ba3739cb8ebc99 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Mon, 13 Jan 2014 11:08:47 +0100 -Subject: [PATCH] ARM: sun5i: a13: Add missing serial aliases - -Some UART aliases have been defined, but not all of them. Add the remaining -ones to be consistent and to ease the parsing of the DT by the bootloaders. - -Signed-off-by: Maxime Ripard ---- - arch/arm/boot/dts/sun5i-a13.dtsi | 5 +++++ - 1 file changed, 5 insertions(+) - -diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi -index 320335a..6de40b6 100644 ---- a/arch/arm/boot/dts/sun5i-a13.dtsi -+++ b/arch/arm/boot/dts/sun5i-a13.dtsi -@@ -16,6 +16,11 @@ - / { - interrupt-parent = <&intc>; - -+ aliases { -+ serial0 = &uart1; -+ serial1 = &uart3; -+ }; -+ - cpus { - #address-cells = <1>; - #size-cells = <0>; --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/240-4-dt-sun6i-add-missing-serial-aliases.patch b/target/linux/sunxi/patches-3.13/240-4-dt-sun6i-add-missing-serial-aliases.patch deleted file mode 100644 index 5a1f25cba0..0000000000 --- a/target/linux/sunxi/patches-3.13/240-4-dt-sun6i-add-missing-serial-aliases.patch +++ /dev/null @@ -1,37 +0,0 @@ -From 27fb9d199aa3d2f89b4d0b1930062bb1a5a69a57 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Thu, 2 Jan 2014 22:05:04 +0100 -Subject: [PATCH] ARM: sun6i: Add missing serial aliases - -Some UART aliases have been defined, but not all of them. Add the remaining -ones to be consistent and to ease the parsing of the DT by the bootloaders. - -Signed-off-by: Maxime Ripard ---- - arch/arm/boot/dts/sun6i-a31.dtsi | 10 ++++++++++ - 1 file changed, 10 insertions(+) - -diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi -index 5256ad9..092bf97 100644 ---- a/arch/arm/boot/dts/sun6i-a31.dtsi -+++ b/arch/arm/boot/dts/sun6i-a31.dtsi -@@ -16,6 +16,16 @@ - / { - interrupt-parent = <&gic>; - -+ aliases { -+ serial0 = &uart0; -+ serial1 = &uart1; -+ serial2 = &uart2; -+ serial3 = &uart3; -+ serial4 = &uart4; -+ serial5 = &uart5; -+ }; -+ -+ - cpus { - #address-cells = <1>; - #size-cells = <0>; --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/241-dt-sun7i-add-pinmuxing-for-uart2.patch b/target/linux/sunxi/patches-3.13/241-dt-sun7i-add-pinmuxing-for-uart2.patch deleted file mode 100644 index 2e64dd88e1..0000000000 --- a/target/linux/sunxi/patches-3.13/241-dt-sun7i-add-pinmuxing-for-uart2.patch +++ /dev/null @@ -1,35 +0,0 @@ -From 4261ec43b199a214f6b0ae5fefefff2e524f8977 Mon Sep 17 00:00:00 2001 -From: Chen-Yu Tsai -Date: Tue, 14 Jan 2014 22:49:50 +0800 -Subject: [PATCH] ARM: dts: sun7i: add pin muxing options for UART2 - -UART2 is used on CubieTruck to connect to the Bluetooth module. -Add the pin set used in this case. - -Signed-off-by: Chen-Yu Tsai -Signed-off-by: Maxime Ripard ---- - arch/arm/boot/dts/sun7i-a20.dtsi | 7 +++++++ - 1 file changed, 7 insertions(+) - -diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi -index b476855..bfb2cf2 100644 ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -381,6 +381,13 @@ - allwinner,pull = <0>; - }; - -+ uart2_pins_a: uart2@0 { -+ allwinner,pins = "PI16", "PI17", "PI18", "PI19"; -+ allwinner,function = "uart2"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ - uart6_pins_a: uart6@0 { - allwinner,pins = "PI12", "PI13"; - allwinner,function = "uart6"; --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/250-clk-sunxi-get-divs-parent-clkname.patch b/target/linux/sunxi/patches-3.13/250-clk-sunxi-get-divs-parent-clkname.patch deleted file mode 100644 index 4496437b8d..0000000000 --- a/target/linux/sunxi/patches-3.13/250-clk-sunxi-get-divs-parent-clkname.patch +++ /dev/null @@ -1,45 +0,0 @@ -From 97e36b3ce3106988b82e1ca53b1d1c872bde855a Mon Sep 17 00:00:00 2001 -From: Chen-Yu Tsai -Date: Mon, 3 Feb 2014 09:51:40 +0800 -Subject: [PATCH] clk: sunxi: get divs parent clock name from parent factor - clock -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Divs clocks consist of a parent factor clock with multiple outputs, -and seperate clocks for each output. Get the name of the parent -clock from the parent factor clock, instead of the DT node name. - -Signed-off-by: Chen-Yu Tsai -Acked-by: Maxime Ripard -Acked-by: Mike Turquette -Signed-off-by: Emilio López ---- - drivers/clk/sunxi/clk-sunxi.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - -diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c -index 7a2ed98..736fb60 100644 ---- a/drivers/clk/sunxi/clk-sunxi.c -+++ b/drivers/clk/sunxi/clk-sunxi.c -@@ -869,7 +869,7 @@ static void __init sunxi_divs_clk_setup(struct device_node *node, - struct divs_data *data) - { - struct clk_onecell_data *clk_data; -- const char *parent = node->name; -+ const char *parent; - const char *clk_name; - struct clk **clks, *pclk; - struct clk_hw *gate_hw, *rate_hw; -@@ -883,6 +883,7 @@ static void __init sunxi_divs_clk_setup(struct device_node *node, - - /* Set up factor clock that we will be dividing */ - pclk = sunxi_factors_clk_setup(node, data->factors); -+ parent = __clk_get_name(pclk); - - reg = of_iomap(node, 0); - --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/251-clk-sunxi-add-clk-output-names-dt-prop.patch b/target/linux/sunxi/patches-3.13/251-clk-sunxi-add-clk-output-names-dt-prop.patch deleted file mode 100644 index 7c49d0f792..0000000000 --- a/target/linux/sunxi/patches-3.13/251-clk-sunxi-add-clk-output-names-dt-prop.patch +++ /dev/null @@ -1,55 +0,0 @@ -From f64111ebaf6776558f0e60d0ea8c7a9c579b9436 Mon Sep 17 00:00:00 2001 -From: Chen-Yu Tsai -Date: Mon, 3 Feb 2014 09:51:37 +0800 -Subject: [PATCH] clk: sunxi: add clock-output-names dt property support -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -sunxi clock drivers use dt node name as clock name, but clock -nodes should be named clk@X, so the names would be the same. -Let the drivers read clock names from dt clock-output-names -property. - -Signed-off-by: Chen-Yu Tsai -Acked-by: Maxime Ripard -Acked-by: Mike Turquette -Signed-off-by: Emilio López ---- - drivers/clk/sunxi/clk-sunxi.c | 6 ++++++ - 1 file changed, 6 insertions(+) - -diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c -index abb6c5a..0ed9794 100644 ---- a/drivers/clk/sunxi/clk-sunxi.c -+++ b/drivers/clk/sunxi/clk-sunxi.c -@@ -51,6 +51,8 @@ static void __init sun4i_osc_clk_setup(struct device_node *node) - if (!gate) - goto err_free_fixed; - -+ of_property_read_string(node, "clock-output-names", &clk_name); -+ - /* set up gate and fixed rate properties */ - gate->reg = of_iomap(node, 0); - gate->bit_idx = SUNXI_OSC24M_GATE; -@@ -601,6 +603,8 @@ static void __init sunxi_mux_clk_setup(struct device_node *node, - (parents[i] = of_clk_get_parent_name(node, i)) != NULL) - i++; - -+ of_property_read_string(node, "clock-output-names", &clk_name); -+ - clk = clk_register_mux(NULL, clk_name, parents, i, - CLK_SET_RATE_NO_REPARENT, reg, - data->shift, SUNXI_MUX_GATE_WIDTH, -@@ -660,6 +664,8 @@ static void __init sunxi_divider_clk_setup(struct device_node *node, - - clk_parent = of_clk_get_parent_name(node, 0); - -+ of_property_read_string(node, "clock-output-names", &clk_name); -+ - clk = clk_register_divider(NULL, clk_name, clk_parent, 0, - reg, data->shift, data->width, - data->pow ? CLK_DIVIDER_POWER_OF_TWO : 0, --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/252-clk-sunxi-add-names-for-pll5-6-into-factors_data.patch b/target/linux/sunxi/patches-3.13/252-clk-sunxi-add-names-for-pll5-6-into-factors_data.patch deleted file mode 100644 index f89e97a92e..0000000000 --- a/target/linux/sunxi/patches-3.13/252-clk-sunxi-add-names-for-pll5-6-into-factors_data.patch +++ /dev/null @@ -1,83 +0,0 @@ -From 667f542db542fddc62d1299b17451d7cae84f6e1 Mon Sep 17 00:00:00 2001 -From: Chen-Yu Tsai -Date: Mon, 3 Feb 2014 09:51:39 +0800 -Subject: [PATCH] clk: sunxi: add names for pll5, pll6 parent clocks to - factors_data -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Some factor clocks, such as the parent clock of pll5 and pll6, have -multiple output names. Add the corresponding names to factors_data -tied to compatible string. - -Signed-off-by: Chen-Yu Tsai -Acked-by: Maxime Ripard -Acked-by: Mike Turquette -Signed-off-by: Emilio López ---- - drivers/clk/sunxi/clk-sunxi.c | 27 ++++++++++++++++++--------- - 1 file changed, 18 insertions(+), 9 deletions(-) - -diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c -index 0ed9794..7a2ed98 100644 ---- a/drivers/clk/sunxi/clk-sunxi.c -+++ b/drivers/clk/sunxi/clk-sunxi.c -@@ -389,6 +389,7 @@ struct factors_data { - int mux; - struct clk_factors_config *table; - void (*getter) (u32 *rate, u32 parent_rate, u8 *n, u8 *k, u8 *m, u8 *p); -+ const char *name; - }; - - static struct clk_factors_config sun4i_pll1_config = { -@@ -457,6 +458,14 @@ struct factors_data { - .enable = 31, - .table = &sun4i_pll5_config, - .getter = sun4i_get_pll5_factors, -+ .name = "pll5", -+}; -+ -+static const struct factors_data sun4i_pll6_data __initconst = { -+ .enable = 31, -+ .table = &sun4i_pll5_config, -+ .getter = sun4i_get_pll5_factors, -+ .name = "pll6", - }; - - static const struct factors_data sun4i_apb1_data __initconst = { -@@ -499,14 +508,14 @@ static struct clk * __init sunxi_factors_clk_setup(struct device_node *node, - (parents[i] = of_clk_get_parent_name(node, i)) != NULL) - i++; - -- /* Nodes should be providing the name via clock-output-names -- * but originally our dts didn't, and so we used node->name. -- * The new, better nodes look like clk@deadbeef, so we pull the -- * name just in this case */ -- if (!strcmp("clk", clk_name)) { -- of_property_read_string_index(node, "clock-output-names", -- 0, &clk_name); -- } -+ /* -+ * some factor clocks, such as pll5 and pll6, may have multiple -+ * outputs, and have their name designated in factors_data -+ */ -+ if (data->name) -+ clk_name = data->name; -+ else -+ of_property_read_string(node, "clock-output-names", &clk_name); - - factors = kzalloc(sizeof(struct clk_factors), GFP_KERNEL); - if (!factors) -@@ -838,7 +847,7 @@ struct divs_data { - }; - - static const struct divs_data pll6_divs_data __initconst = { -- .factors = &sun4i_pll5_data, -+ .factors = &sun4i_pll6_data, - .div = { - { .shift = 0, .table = pll6_sata_tbl, .gate = 14 }, /* M, SATA */ - { .fixed = 2 }, /* P, other */ --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/253-clk-sunxi-add-a20a31-gmac-clock.patch b/target/linux/sunxi/patches-3.13/253-clk-sunxi-add-a20a31-gmac-clock.patch deleted file mode 100644 index ce5a0705c1..0000000000 --- a/target/linux/sunxi/patches-3.13/253-clk-sunxi-add-a20a31-gmac-clock.patch +++ /dev/null @@ -1,177 +0,0 @@ -From 967f938d4b16233fd7596e94803a36161847c6a8 Mon Sep 17 00:00:00 2001 -From: Chen-Yu Tsai -Date: Mon, 10 Feb 2014 18:35:47 +0800 -Subject: [PATCH] clk: sunxi: Add Allwinner A20/A31 GMAC clock unit - -The Allwinner A20/A31 clock module controls the transmit clock source -and interface type of the GMAC ethernet controller. Model this as -a single clock for GMAC drivers to use. - -Signed-off-by: Chen-Yu Tsai ---- - Documentation/devicetree/bindings/clock/sunxi.txt | 30 +++++++ - drivers/clk/sunxi/clk-sunxi.c | 96 +++++++++++++++++++++++ - 2 files changed, 126 insertions(+) - -diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt -index 93d003c..0da774c 100644 ---- a/Documentation/devicetree/bindings/clock/sunxi.txt -+++ b/Documentation/devicetree/bindings/clock/sunxi.txt -@@ -37,6 +37,7 @@ Required properties: - "allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31 - "allwinner,sun4i-mod0-clk" - for the module 0 family of clocks - "allwinner,sun7i-a20-out-clk" - for the external output clocks -+ "allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31 - - Required properties for all clocks: - - reg : shall be the control register address for the clock. -@@ -50,6 +51,9 @@ Required properties for all clocks: - If the clock module only has one output, the name shall be the - module name. - -+For "allwinner,sun7i-a20-gmac-clk", the parent clocks shall be fixed rate -+dummy clocks at 25 MHz and 125 MHz, respectively. See example. -+ - Clock consumers should specify the desired clocks they use with a - "clocks" phandle cell. Consumers that are using a gated clock should - provide an additional ID in their clock property. This ID is the -@@ -96,3 +100,29 @@ mmc0_clk: clk@01c20088 { - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc0"; - }; -+ -+mii_phy_tx_clk: clk@2 { -+ #clock-cells = <0>; -+ compatible = "fixed-clock"; -+ clock-frequency = <25000000>; -+ clock-output-names = "mii_phy_tx"; -+}; -+ -+gmac_int_tx_clk: clk@3 { -+ #clock-cells = <0>; -+ compatible = "fixed-clock"; -+ clock-frequency = <125000000>; -+ clock-output-names = "gmac_int_tx"; -+}; -+ -+gmac_clk: clk@01c20164 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun7i-a20-gmac-clk"; -+ reg = <0x01c20164 0x4>; -+ /* -+ * The first clock must be fixed at 25MHz; -+ * the second clock must be fixed at 125MHz -+ */ -+ clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>; -+ clock-output-names = "gmac"; -+}; -diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c -index 0dce6fd..3283179 100644 ---- a/drivers/clk/sunxi/clk-sunxi.c -+++ b/drivers/clk/sunxi/clk-sunxi.c -@@ -404,6 +404,102 @@ static void sun7i_a20_get_out_factors(u32 *freq, u32 parent_rate, - - - /** -+ * sun7i_a20_gmac_clk_setup - Setup function for A20/A31 GMAC clock module -+ * -+ * This clock looks something like this -+ * ________________________ -+ * MII TX clock from PHY >-----|___________ _________|----> to GMAC core -+ * GMAC Int. RGMII TX clk >----|___________\__/__gate---|----> to PHY -+ * Ext. 125MHz RGMII TX clk >--|__divider__/ | -+ * |________________________| -+ * -+ * The external 125 MHz reference is optional, i.e. GMAC can use its -+ * internal TX clock just fine. The A31 GMAC clock module does not have -+ * the divider controls for the external reference. -+ * -+ * To keep it simple, let the GMAC use either the MII TX clock for MII mode, -+ * and its internal TX clock for GMII and RGMII modes. The GMAC driver should -+ * select the appropriate source and gate/ungate the output to the PHY. -+ * -+ * Only the GMAC should use this clock. Altering the clock so that it doesn't -+ * match the GMAC's operation parameters will result in the GMAC not being -+ * able to send traffic out. The GMAC driver should set the clock rate and -+ * enable/disable this clock to configure the required state. The clock -+ * driver then responds by auto-reparenting the clock. -+ */ -+ -+#define SUN7I_A20_GMAC_GPIT 2 -+#define SUN7I_A20_GMAC_MASK 0x3 -+#define SUN7I_A20_GMAC_PARENTS 2 -+ -+static void __init sun7i_a20_gmac_clk_setup(struct device_node *node) -+{ -+ struct clk *clk; -+ struct clk_mux *mux; -+ struct clk_gate *gate; -+ const char *clk_name = node->name; -+ const char *parents[SUN7I_A20_GMAC_PARENTS]; -+ void *reg; -+ -+ if (of_property_read_string(node, "clock-output-names", &clk_name)) -+ return; -+ -+ /* allocate mux and gate clock structs */ -+ mux = kzalloc(sizeof(struct clk_mux), GFP_KERNEL); -+ if (!mux) -+ return; -+ -+ gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL); -+ if (!gate) -+ goto free_mux; -+ -+ /* gmac clock requires exactly 2 parents */ -+ parents[0] = of_clk_get_parent_name(node, 0); -+ parents[1] = of_clk_get_parent_name(node, 1); -+ if (!parents[0] || !parents[1]) -+ goto free_gate; -+ -+ reg = of_iomap(node, 0); -+ if (!reg) -+ goto free_gate; -+ -+ /* set up gate and fixed rate properties */ -+ gate->reg = reg; -+ gate->bit_idx = SUN7I_A20_GMAC_GPIT; -+ gate->lock = &clk_lock; -+ mux->reg = reg; -+ mux->mask = SUN7I_A20_GMAC_MASK; -+ mux->flags = CLK_MUX_INDEX_BIT; -+ mux->lock = &clk_lock; -+ -+ clk = clk_register_composite(NULL, clk_name, -+ parents, SUN7I_A20_GMAC_PARENTS, -+ &mux->hw, &clk_mux_ops, -+ NULL, NULL, -+ &gate->hw, &clk_gate_ops, -+ 0); -+ -+ if (IS_ERR(clk)) -+ goto iounmap_reg; -+ -+ of_clk_add_provider(node, of_clk_src_simple_get, clk); -+ clk_register_clkdev(clk, clk_name, NULL); -+ -+ return; -+ -+iounmap_reg: -+ iounmap(reg); -+free_gate: -+ kfree(gate); -+free_mux: -+ kfree(mux); -+} -+CLK_OF_DECLARE(sun7i_a20_gmac, "allwinner,sun7i-a20-gmac-clk", -+ sun7i_a20_gmac_clk_setup); -+ -+ -+ -+/** - * sunxi_factors_clk_setup() - Setup function for factor clocks - */ - --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/254-dt-sun7i-change-32k-osc-nodename.patch b/target/linux/sunxi/patches-3.13/254-dt-sun7i-change-32k-osc-nodename.patch deleted file mode 100644 index 5238534ff1..0000000000 --- a/target/linux/sunxi/patches-3.13/254-dt-sun7i-change-32k-osc-nodename.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 673fac742946bcb7cc43b9e67459862d6c4a8a6c Mon Sep 17 00:00:00 2001 -From: Chen-Yu Tsai -Date: Wed, 1 Jan 2014 10:30:47 +0800 -Subject: [PATCH] ARM: dts: sun7i: Change 32768 Hz oscillator node name to - clk@N style - -Device tree naming conventions state that node names should match -the nodes function. Change external low speed oscillator node name -to match. - -Signed-off-by: Chen-Yu Tsai -Signed-off-by: Maxime Ripard ---- - arch/arm/boot/dts/sun7i-a20.dtsi | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - -diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi -index 898b021..edad6f1 100644 ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -53,10 +53,11 @@ - clock-frequency = <24000000>; - }; - -- osc32k: osc32k { -+ osc32k: clk@0 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; -+ clock-output-names = "osc32k"; - }; - - pll1: pll1@01c20000 { --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/255-clk-sunxi-add-a31-pll6.patch b/target/linux/sunxi/patches-3.13/255-clk-sunxi-add-a31-pll6.patch deleted file mode 100644 index 6e220e97e0..0000000000 --- a/target/linux/sunxi/patches-3.13/255-clk-sunxi-add-a31-pll6.patch +++ /dev/null @@ -1,111 +0,0 @@ -From 92ef67c53ad92487c3c8de75e7940384c2edd793 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Wed, 5 Feb 2014 14:05:03 +0100 -Subject: [PATCH] clk: sunxi: Add support for PLL6 on the A31 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -The A31 has a slightly different PLL6 clock. Add support for this new clock in -our driver. - -Signed-off-by: Maxime Ripard -Signed-off-by: Emilio López ---- - Documentation/devicetree/bindings/clock/sunxi.txt | 1 + - drivers/clk/sunxi/clk-sunxi.c | 45 +++++++++++++++++++++++ - 2 files changed, 46 insertions(+) - -diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt -index ca2b692..c37c764 100644 ---- a/Documentation/devicetree/bindings/clock/sunxi.txt -+++ b/Documentation/devicetree/bindings/clock/sunxi.txt -@@ -11,6 +11,7 @@ Required properties: - "allwinner,sun6i-a31-pll1-clk" - for the main PLL clock on A31 - "allwinner,sun4i-pll5-clk" - for the PLL5 clock - "allwinner,sun4i-pll6-clk" - for the PLL6 clock -+ "allwinner,sun6i-a31-pll6-clk" - for the PLL6 clock on A31 - "allwinner,sun4i-cpu-clk" - for the CPU multiplexer clock - "allwinner,sun4i-axi-clk" - for the AXI clock - "allwinner,sun4i-axi-gates-clk" - for the AXI gates -diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c -index a779c31..d4cf297 100644 ---- a/drivers/clk/sunxi/clk-sunxi.c -+++ b/drivers/clk/sunxi/clk-sunxi.c -@@ -252,7 +252,38 @@ static void sun4i_get_pll5_factors(u32 *freq, u32 parent_rate, - *n = DIV_ROUND_UP(div, (*k+1)); - } - -+/** -+ * sun6i_a31_get_pll6_factors() - calculates n, k factors for A31 PLL6 -+ * PLL6 rate is calculated as follows -+ * rate = parent_rate * n * (k + 1) / 2 -+ * parent_rate is always 24Mhz -+ */ -+ -+static void sun6i_a31_get_pll6_factors(u32 *freq, u32 parent_rate, -+ u8 *n, u8 *k, u8 *m, u8 *p) -+{ -+ u8 div; -+ -+ /* -+ * We always have 24MHz / 2, so we can just say that our -+ * parent clock is 12MHz. -+ */ -+ parent_rate = parent_rate / 2; -+ -+ /* Normalize value to a parent_rate multiple (24M / 2) */ -+ div = *freq / parent_rate; -+ *freq = parent_rate * div; -+ -+ /* we were called to round the frequency, we can now return */ -+ if (n == NULL) -+ return; -+ -+ *k = div / 32; -+ if (*k > 3) -+ *k = 3; - -+ *n = DIV_ROUND_UP(div, (*k+1)); -+} - - /** - * sun4i_get_apb1_factors() - calculates m, p factors for APB1 -@@ -420,6 +451,13 @@ struct factors_data { - .kwidth = 2, - }; - -+static struct clk_factors_config sun6i_a31_pll6_config = { -+ .nshift = 8, -+ .nwidth = 5, -+ .kshift = 4, -+ .kwidth = 2, -+}; -+ - static struct clk_factors_config sun4i_apb1_config = { - .mshift = 0, - .mwidth = 5, -@@ -469,6 +507,12 @@ struct factors_data { - .name = "pll6", - }; - -+static const struct factors_data sun6i_a31_pll6_data __initconst = { -+ .enable = 31, -+ .table = &sun6i_a31_pll6_config, -+ .getter = sun6i_a31_get_pll6_factors, -+}; -+ - static const struct factors_data sun4i_apb1_data __initconst = { - .table = &sun4i_apb1_config, - .getter = sun4i_get_apb1_factors, -@@ -1069,6 +1113,7 @@ static void __init sunxi_divs_clk_setup(struct device_node *node, - static const struct of_device_id clk_factors_match[] __initconst = { - {.compatible = "allwinner,sun4i-pll1-clk", .data = &sun4i_pll1_data,}, - {.compatible = "allwinner,sun6i-a31-pll1-clk", .data = &sun6i_a31_pll1_data,}, -+ {.compatible = "allwinner,sun6i-a31-pll6-clk", .data = &sun6i_a31_pll6_data,}, - {.compatible = "allwinner,sun4i-apb1-clk", .data = &sun4i_apb1_data,}, - {.compatible = "allwinner,sun4i-mod0-clk", .data = &sun4i_mod0_data,}, - {.compatible = "allwinner,sun7i-a20-out-clk", .data = &sun7i_a20_out_data,}, --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/260-spi-add-a31-spi-driver.patch b/target/linux/sunxi/patches-3.13/260-spi-add-a31-spi-driver.patch deleted file mode 100644 index 8941125a60..0000000000 --- a/target/linux/sunxi/patches-3.13/260-spi-add-a31-spi-driver.patch +++ /dev/null @@ -1,599 +0,0 @@ -From 3558fe900e8af6c3bfadeff24a12ffb19ac9b108 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Wed, 5 Feb 2014 14:05:05 +0100 -Subject: [PATCH 1/2] spi: sunxi: Add Allwinner A31 SPI controller driver - -The Allwinner A31 has a new SPI controller IP compared to the older Allwinner -SoCs. - -It supports DMA, but the driver only does PIO for now, and DMA will be -supported eventually. - -Signed-off-by: Maxime Ripard -Signed-off-by: Mark Brown ---- - .../devicetree/bindings/spi/spi-sun6i.txt | 24 + - drivers/spi/Kconfig | 6 + - drivers/spi/Makefile | 1 + - drivers/spi/spi-sun6i.c | 483 +++++++++++++++++++++ - 4 files changed, 514 insertions(+) - create mode 100644 Documentation/devicetree/bindings/spi/spi-sun6i.txt - create mode 100644 drivers/spi/spi-sun6i.c - -diff --git a/Documentation/devicetree/bindings/spi/spi-sun6i.txt b/Documentation/devicetree/bindings/spi/spi-sun6i.txt -new file mode 100644 -index 0000000..21de73d ---- /dev/null -+++ b/Documentation/devicetree/bindings/spi/spi-sun6i.txt -@@ -0,0 +1,24 @@ -+Allwinner A31 SPI controller -+ -+Required properties: -+- compatible: Should be "allwinner,sun6i-a31-spi". -+- reg: Should contain register location and length. -+- interrupts: Should contain interrupt. -+- clocks: phandle to the clocks feeding the SPI controller. Two are -+ needed: -+ - "ahb": the gated AHB parent clock -+ - "mod": the parent module clock -+- clock-names: Must contain the clock names described just above -+- resets: phandle to the reset controller asserting this device in -+ reset -+ -+Example: -+ -+spi1: spi@01c69000 { -+ compatible = "allwinner,sun6i-a31-spi"; -+ reg = <0x01c69000 0x1000>; -+ interrupts = <0 66 4>; -+ clocks = <&ahb1_gates 21>, <&spi1_clk>; -+ clock-names = "ahb", "mod"; -+ resets = <&ahb1_rst 21>; -+}; -diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig -index ba9310b..7cfe0ee 100644 ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -446,6 +446,12 @@ config SPI_SIRF - help - SPI driver for CSR SiRFprimaII SoCs - -+config SPI_SUN6I -+ tristate "Allwinner A31 SPI controller" -+ depends on ARCH_SUNXI || COMPILE_TEST -+ help -+ This enables using the SPI controller on the Allwinner A31 SoCs. -+ - config SPI_MXS - tristate "Freescale MXS SPI controller" - depends on ARCH_MXS -diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile -index 95af48d..13b6ccf 100644 ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -70,6 +70,7 @@ obj-$(CONFIG_SPI_SH_HSPI) += spi-sh-hspi.o - obj-$(CONFIG_SPI_SH_MSIOF) += spi-sh-msiof.o - obj-$(CONFIG_SPI_SH_SCI) += spi-sh-sci.o - obj-$(CONFIG_SPI_SIRF) += spi-sirf.o -+obj-$(CONFIG_SPI_SUN6I) += spi-sun6i.o - obj-$(CONFIG_SPI_TEGRA114) += spi-tegra114.o - obj-$(CONFIG_SPI_TEGRA20_SFLASH) += spi-tegra20-sflash.o - obj-$(CONFIG_SPI_TEGRA20_SLINK) += spi-tegra20-slink.o -diff --git a/drivers/spi/spi-sun6i.c b/drivers/spi/spi-sun6i.c -new file mode 100644 -index 0000000..94d38d0 ---- /dev/null -+++ b/drivers/spi/spi-sun6i.c -@@ -0,0 +1,483 @@ -+/* -+ * Copyright (C) 2012 - 2014 Allwinner Tech -+ * Pan Nan -+ * -+ * Copyright (C) 2014 Maxime Ripard -+ * Maxime Ripard -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+#define SUN6I_FIFO_DEPTH 128 -+ -+#define SUN6I_GBL_CTL_REG 0x04 -+#define SUN6I_GBL_CTL_BUS_ENABLE BIT(0) -+#define SUN6I_GBL_CTL_MASTER BIT(1) -+#define SUN6I_GBL_CTL_TP BIT(7) -+#define SUN6I_GBL_CTL_RST BIT(31) -+ -+#define SUN6I_TFR_CTL_REG 0x08 -+#define SUN6I_TFR_CTL_CPHA BIT(0) -+#define SUN6I_TFR_CTL_CPOL BIT(1) -+#define SUN6I_TFR_CTL_SPOL BIT(2) -+#define SUN6I_TFR_CTL_CS_MASK 0x3 -+#define SUN6I_TFR_CTL_CS(cs) (((cs) & SUN6I_TFR_CTL_CS_MASK) << 4) -+#define SUN6I_TFR_CTL_CS_MANUAL BIT(6) -+#define SUN6I_TFR_CTL_CS_LEVEL BIT(7) -+#define SUN6I_TFR_CTL_DHB BIT(8) -+#define SUN6I_TFR_CTL_FBS BIT(12) -+#define SUN6I_TFR_CTL_XCH BIT(31) -+ -+#define SUN6I_INT_CTL_REG 0x10 -+#define SUN6I_INT_CTL_RF_OVF BIT(8) -+#define SUN6I_INT_CTL_TC BIT(12) -+ -+#define SUN6I_INT_STA_REG 0x14 -+ -+#define SUN6I_FIFO_CTL_REG 0x18 -+#define SUN6I_FIFO_CTL_RF_RST BIT(15) -+#define SUN6I_FIFO_CTL_TF_RST BIT(31) -+ -+#define SUN6I_FIFO_STA_REG 0x1c -+#define SUN6I_FIFO_STA_RF_CNT_MASK 0x7f -+#define SUN6I_FIFO_STA_RF_CNT_BITS 0 -+#define SUN6I_FIFO_STA_TF_CNT_MASK 0x7f -+#define SUN6I_FIFO_STA_TF_CNT_BITS 16 -+ -+#define SUN6I_CLK_CTL_REG 0x24 -+#define SUN6I_CLK_CTL_CDR2_MASK 0xff -+#define SUN6I_CLK_CTL_CDR2(div) (((div) & SUN6I_CLK_CTL_CDR2_MASK) << 0) -+#define SUN6I_CLK_CTL_CDR1_MASK 0xf -+#define SUN6I_CLK_CTL_CDR1(div) (((div) & SUN6I_CLK_CTL_CDR1_MASK) << 8) -+#define SUN6I_CLK_CTL_DRS BIT(12) -+ -+#define SUN6I_BURST_CNT_REG 0x30 -+#define SUN6I_BURST_CNT(cnt) ((cnt) & 0xffffff) -+ -+#define SUN6I_XMIT_CNT_REG 0x34 -+#define SUN6I_XMIT_CNT(cnt) ((cnt) & 0xffffff) -+ -+#define SUN6I_BURST_CTL_CNT_REG 0x38 -+#define SUN6I_BURST_CTL_CNT_STC(cnt) ((cnt) & 0xffffff) -+ -+#define SUN6I_TXDATA_REG 0x200 -+#define SUN6I_RXDATA_REG 0x300 -+ -+struct sun6i_spi { -+ struct spi_master *master; -+ void __iomem *base_addr; -+ struct clk *hclk; -+ struct clk *mclk; -+ struct reset_control *rstc; -+ -+ struct completion done; -+ -+ const u8 *tx_buf; -+ u8 *rx_buf; -+ int len; -+}; -+ -+static inline u32 sun6i_spi_read(struct sun6i_spi *sspi, u32 reg) -+{ -+ return readl(sspi->base_addr + reg); -+} -+ -+static inline void sun6i_spi_write(struct sun6i_spi *sspi, u32 reg, u32 value) -+{ -+ writel(value, sspi->base_addr + reg); -+} -+ -+static inline void sun6i_spi_drain_fifo(struct sun6i_spi *sspi, int len) -+{ -+ u32 reg, cnt; -+ u8 byte; -+ -+ /* See how much data is available */ -+ reg = sun6i_spi_read(sspi, SUN6I_FIFO_STA_REG); -+ reg &= SUN6I_FIFO_STA_RF_CNT_MASK; -+ cnt = reg >> SUN6I_FIFO_STA_RF_CNT_BITS; -+ -+ if (len > cnt) -+ len = cnt; -+ -+ while (len--) { -+ byte = readb(sspi->base_addr + SUN6I_RXDATA_REG); -+ if (sspi->rx_buf) -+ *sspi->rx_buf++ = byte; -+ } -+} -+ -+static inline void sun6i_spi_fill_fifo(struct sun6i_spi *sspi, int len) -+{ -+ u8 byte; -+ -+ if (len > sspi->len) -+ len = sspi->len; -+ -+ while (len--) { -+ byte = sspi->tx_buf ? *sspi->tx_buf++ : 0; -+ writeb(byte, sspi->base_addr + SUN6I_TXDATA_REG); -+ sspi->len--; -+ } -+} -+ -+static void sun6i_spi_set_cs(struct spi_device *spi, bool enable) -+{ -+ struct sun6i_spi *sspi = spi_master_get_devdata(spi->master); -+ u32 reg; -+ -+ reg = sun6i_spi_read(sspi, SUN6I_TFR_CTL_REG); -+ reg &= ~SUN6I_TFR_CTL_CS_MASK; -+ reg |= SUN6I_TFR_CTL_CS(spi->chip_select); -+ -+ if (enable) -+ reg |= SUN6I_TFR_CTL_CS_LEVEL; -+ else -+ reg &= ~SUN6I_TFR_CTL_CS_LEVEL; -+ -+ sun6i_spi_write(sspi, SUN6I_TFR_CTL_REG, reg); -+} -+ -+ -+static int sun6i_spi_transfer_one(struct spi_master *master, -+ struct spi_device *spi, -+ struct spi_transfer *tfr) -+{ -+ struct sun6i_spi *sspi = spi_master_get_devdata(master); -+ unsigned int mclk_rate, div, timeout; -+ unsigned int tx_len = 0; -+ int ret = 0; -+ u32 reg; -+ -+ /* We don't support transfer larger than the FIFO */ -+ if (tfr->len > SUN6I_FIFO_DEPTH) -+ return -EINVAL; -+ -+ reinit_completion(&sspi->done); -+ sspi->tx_buf = tfr->tx_buf; -+ sspi->rx_buf = tfr->rx_buf; -+ sspi->len = tfr->len; -+ -+ /* Clear pending interrupts */ -+ sun6i_spi_write(sspi, SUN6I_INT_STA_REG, ~0); -+ -+ /* Reset FIFO */ -+ sun6i_spi_write(sspi, SUN6I_FIFO_CTL_REG, -+ SUN6I_FIFO_CTL_RF_RST | SUN6I_FIFO_CTL_TF_RST); -+ -+ /* -+ * Setup the transfer control register: Chip Select, -+ * polarities, etc. -+ */ -+ reg = sun6i_spi_read(sspi, SUN6I_TFR_CTL_REG); -+ -+ if (spi->mode & SPI_CPOL) -+ reg |= SUN6I_TFR_CTL_CPOL; -+ else -+ reg &= ~SUN6I_TFR_CTL_CPOL; -+ -+ if (spi->mode & SPI_CPHA) -+ reg |= SUN6I_TFR_CTL_CPHA; -+ else -+ reg &= ~SUN6I_TFR_CTL_CPHA; -+ -+ if (spi->mode & SPI_LSB_FIRST) -+ reg |= SUN6I_TFR_CTL_FBS; -+ else -+ reg &= ~SUN6I_TFR_CTL_FBS; -+ -+ /* -+ * If it's a TX only transfer, we don't want to fill the RX -+ * FIFO with bogus data -+ */ -+ if (sspi->rx_buf) -+ reg &= ~SUN6I_TFR_CTL_DHB; -+ else -+ reg |= SUN6I_TFR_CTL_DHB; -+ -+ /* We want to control the chip select manually */ -+ reg |= SUN6I_TFR_CTL_CS_MANUAL; -+ -+ sun6i_spi_write(sspi, SUN6I_TFR_CTL_REG, reg); -+ -+ /* Ensure that we have a parent clock fast enough */ -+ mclk_rate = clk_get_rate(sspi->mclk); -+ if (mclk_rate < (2 * spi->max_speed_hz)) { -+ clk_set_rate(sspi->mclk, 2 * spi->max_speed_hz); -+ mclk_rate = clk_get_rate(sspi->mclk); -+ } -+ -+ /* -+ * Setup clock divider. -+ * -+ * We have two choices there. Either we can use the clock -+ * divide rate 1, which is calculated thanks to this formula: -+ * SPI_CLK = MOD_CLK / (2 ^ cdr) -+ * Or we can use CDR2, which is calculated with the formula: -+ * SPI_CLK = MOD_CLK / (2 * (cdr + 1)) -+ * Wether we use the former or the latter is set through the -+ * DRS bit. -+ * -+ * First try CDR2, and if we can't reach the expected -+ * frequency, fall back to CDR1. -+ */ -+ div = mclk_rate / (2 * spi->max_speed_hz); -+ if (div <= (SUN6I_CLK_CTL_CDR2_MASK + 1)) { -+ if (div > 0) -+ div--; -+ -+ reg = SUN6I_CLK_CTL_CDR2(div) | SUN6I_CLK_CTL_DRS; -+ } else { -+ div = ilog2(mclk_rate) - ilog2(spi->max_speed_hz); -+ reg = SUN6I_CLK_CTL_CDR1(div); -+ } -+ -+ sun6i_spi_write(sspi, SUN6I_CLK_CTL_REG, reg); -+ -+ /* Setup the transfer now... */ -+ if (sspi->tx_buf) -+ tx_len = tfr->len; -+ -+ /* Setup the counters */ -+ sun6i_spi_write(sspi, SUN6I_BURST_CNT_REG, SUN6I_BURST_CNT(tfr->len)); -+ sun6i_spi_write(sspi, SUN6I_XMIT_CNT_REG, SUN6I_XMIT_CNT(tx_len)); -+ sun6i_spi_write(sspi, SUN6I_BURST_CTL_CNT_REG, -+ SUN6I_BURST_CTL_CNT_STC(tx_len)); -+ -+ /* Fill the TX FIFO */ -+ sun6i_spi_fill_fifo(sspi, SUN6I_FIFO_DEPTH); -+ -+ /* Enable the interrupts */ -+ sun6i_spi_write(sspi, SUN6I_INT_CTL_REG, SUN6I_INT_CTL_TC); -+ -+ /* Start the transfer */ -+ reg = sun6i_spi_read(sspi, SUN6I_TFR_CTL_REG); -+ sun6i_spi_write(sspi, SUN6I_TFR_CTL_REG, reg | SUN6I_TFR_CTL_XCH); -+ -+ timeout = wait_for_completion_timeout(&sspi->done, -+ msecs_to_jiffies(1000)); -+ if (!timeout) { -+ ret = -ETIMEDOUT; -+ goto out; -+ } -+ -+ sun6i_spi_drain_fifo(sspi, SUN6I_FIFO_DEPTH); -+ -+out: -+ sun6i_spi_write(sspi, SUN6I_INT_CTL_REG, 0); -+ -+ return ret; -+} -+ -+static irqreturn_t sun6i_spi_handler(int irq, void *dev_id) -+{ -+ struct sun6i_spi *sspi = dev_id; -+ u32 status = sun6i_spi_read(sspi, SUN6I_INT_STA_REG); -+ -+ /* Transfer complete */ -+ if (status & SUN6I_INT_CTL_TC) { -+ sun6i_spi_write(sspi, SUN6I_INT_STA_REG, SUN6I_INT_CTL_TC); -+ complete(&sspi->done); -+ return IRQ_HANDLED; -+ } -+ -+ return IRQ_NONE; -+} -+ -+static int sun6i_spi_runtime_resume(struct device *dev) -+{ -+ struct spi_master *master = dev_get_drvdata(dev); -+ struct sun6i_spi *sspi = spi_master_get_devdata(master); -+ int ret; -+ -+ ret = clk_prepare_enable(sspi->hclk); -+ if (ret) { -+ dev_err(dev, "Couldn't enable AHB clock\n"); -+ goto out; -+ } -+ -+ ret = clk_prepare_enable(sspi->mclk); -+ if (ret) { -+ dev_err(dev, "Couldn't enable module clock\n"); -+ goto err; -+ } -+ -+ ret = reset_control_deassert(sspi->rstc); -+ if (ret) { -+ dev_err(dev, "Couldn't deassert the device from reset\n"); -+ goto err2; -+ } -+ -+ sun6i_spi_write(sspi, SUN6I_GBL_CTL_REG, -+ SUN6I_GBL_CTL_BUS_ENABLE | SUN6I_GBL_CTL_MASTER | SUN6I_GBL_CTL_TP); -+ -+ return 0; -+ -+err2: -+ clk_disable_unprepare(sspi->mclk); -+err: -+ clk_disable_unprepare(sspi->hclk); -+out: -+ return ret; -+} -+ -+static int sun6i_spi_runtime_suspend(struct device *dev) -+{ -+ struct spi_master *master = dev_get_drvdata(dev); -+ struct sun6i_spi *sspi = spi_master_get_devdata(master); -+ -+ reset_control_assert(sspi->rstc); -+ clk_disable_unprepare(sspi->mclk); -+ clk_disable_unprepare(sspi->hclk); -+ -+ return 0; -+} -+ -+static int sun6i_spi_probe(struct platform_device *pdev) -+{ -+ struct spi_master *master; -+ struct sun6i_spi *sspi; -+ struct resource *res; -+ int ret = 0, irq; -+ -+ master = spi_alloc_master(&pdev->dev, sizeof(struct sun6i_spi)); -+ if (!master) { -+ dev_err(&pdev->dev, "Unable to allocate SPI Master\n"); -+ return -ENOMEM; -+ } -+ -+ platform_set_drvdata(pdev, master); -+ sspi = spi_master_get_devdata(master); -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ sspi->base_addr = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(sspi->base_addr)) { -+ ret = PTR_ERR(sspi->base_addr); -+ goto err_free_master; -+ } -+ -+ irq = platform_get_irq(pdev, 0); -+ if (irq < 0) { -+ dev_err(&pdev->dev, "No spi IRQ specified\n"); -+ ret = -ENXIO; -+ goto err_free_master; -+ } -+ -+ ret = devm_request_irq(&pdev->dev, irq, sun6i_spi_handler, -+ 0, "sun6i-spi", sspi); -+ if (ret) { -+ dev_err(&pdev->dev, "Cannot request IRQ\n"); -+ goto err_free_master; -+ } -+ -+ sspi->master = master; -+ master->set_cs = sun6i_spi_set_cs; -+ master->transfer_one = sun6i_spi_transfer_one; -+ master->num_chipselect = 4; -+ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST; -+ master->dev.of_node = pdev->dev.of_node; -+ master->auto_runtime_pm = true; -+ -+ sspi->hclk = devm_clk_get(&pdev->dev, "ahb"); -+ if (IS_ERR(sspi->hclk)) { -+ dev_err(&pdev->dev, "Unable to acquire AHB clock\n"); -+ ret = PTR_ERR(sspi->hclk); -+ goto err_free_master; -+ } -+ -+ sspi->mclk = devm_clk_get(&pdev->dev, "mod"); -+ if (IS_ERR(sspi->mclk)) { -+ dev_err(&pdev->dev, "Unable to acquire module clock\n"); -+ ret = PTR_ERR(sspi->mclk); -+ goto err_free_master; -+ } -+ -+ init_completion(&sspi->done); -+ -+ sspi->rstc = devm_reset_control_get(&pdev->dev, NULL); -+ if (IS_ERR(sspi->rstc)) { -+ dev_err(&pdev->dev, "Couldn't get reset controller\n"); -+ ret = PTR_ERR(sspi->rstc); -+ goto err_free_master; -+ } -+ -+ /* -+ * This wake-up/shutdown pattern is to be able to have the -+ * device woken up, even if runtime_pm is disabled -+ */ -+ ret = sun6i_spi_runtime_resume(&pdev->dev); -+ if (ret) { -+ dev_err(&pdev->dev, "Couldn't resume the device\n"); -+ goto err_free_master; -+ } -+ -+ pm_runtime_set_active(&pdev->dev); -+ pm_runtime_enable(&pdev->dev); -+ pm_runtime_idle(&pdev->dev); -+ -+ ret = devm_spi_register_master(&pdev->dev, master); -+ if (ret) { -+ dev_err(&pdev->dev, "cannot register SPI master\n"); -+ goto err_pm_disable; -+ } -+ -+ return 0; -+ -+err_pm_disable: -+ pm_runtime_disable(&pdev->dev); -+ sun6i_spi_runtime_suspend(&pdev->dev); -+err_free_master: -+ spi_master_put(master); -+ return ret; -+} -+ -+static int sun6i_spi_remove(struct platform_device *pdev) -+{ -+ pm_runtime_disable(&pdev->dev); -+ -+ return 0; -+} -+ -+static const struct of_device_id sun6i_spi_match[] = { -+ { .compatible = "allwinner,sun6i-a31-spi", }, -+ {} -+}; -+MODULE_DEVICE_TABLE(of, sun6i_spi_match); -+ -+static const struct dev_pm_ops sun6i_spi_pm_ops = { -+ .runtime_resume = sun6i_spi_runtime_resume, -+ .runtime_suspend = sun6i_spi_runtime_suspend, -+}; -+ -+static struct platform_driver sun6i_spi_driver = { -+ .probe = sun6i_spi_probe, -+ .remove = sun6i_spi_remove, -+ .driver = { -+ .name = "sun6i-spi", -+ .owner = THIS_MODULE, -+ .of_match_table = sun6i_spi_match, -+ .pm = &sun6i_spi_pm_ops, -+ }, -+}; -+module_platform_driver(sun6i_spi_driver); -+ -+MODULE_AUTHOR("Pan Nan "); -+MODULE_AUTHOR("Maxime Ripard "); -+MODULE_DESCRIPTION("Allwinner A31 SPI controller driver"); -+MODULE_LICENSE("GPL"); --- -1.8.5.5 - - -From 7961656a6f11b69966500d7bd25273203fd930da Mon Sep 17 00:00:00 2001 -From: Mark Brown -Date: Thu, 6 Feb 2014 10:53:51 +0000 -Subject: [PATCH 2/2] spi/sunxi: Add missing dependency on RESET_CONTROLLER - -Signed-off-by: Mark Brown ---- - drivers/spi/Kconfig | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig -index 7cfe0ee..0ec4641 100644 ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -449,6 +449,7 @@ config SPI_SIRF - config SPI_SUN6I - tristate "Allwinner A31 SPI controller" - depends on ARCH_SUNXI || COMPILE_TEST -+ depends on RESET_CONTROLLER - help - This enables using the SPI controller on the Allwinner A31 SoCs. - --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/261-dt-sun6i-add-pll6-and-spi.patch b/target/linux/sunxi/patches-3.13/261-dt-sun6i-add-pll6-and-spi.patch deleted file mode 100644 index 78475fccae..0000000000 --- a/target/linux/sunxi/patches-3.13/261-dt-sun6i-add-pll6-and-spi.patch +++ /dev/null @@ -1,82 +0,0 @@ -From b0a09c756bf6e0b89d6b88a7620ba4cd86b1895b Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Wed, 5 Feb 2014 14:05:04 +0100 -Subject: [PATCH] ARM: sun6i: dt: Add PLL6 and SPI module clocks - -The module clocks in the A31 are still compatible with the A10 one. Add the SPI -module clocks and the PLL6 in the device tree to allow their use by the SPI -controllers. - -Signed-off-by: Maxime Ripard ---- - arch/arm/boot/dts/sun6i-a31.dtsi | 46 ++++++++++++++++++++++++++++++++-------- - 1 file changed, 37 insertions(+), 9 deletions(-) - -diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi -index 092bf97..93d7bb6 100644 ---- a/arch/arm/boot/dts/sun6i-a31.dtsi -+++ b/arch/arm/boot/dts/sun6i-a31.dtsi -@@ -83,16 +83,12 @@ - clocks = <&osc24M>; - }; - -- /* -- * This is a dummy clock, to be used as placeholder on -- * other mux clocks when a specific parent clock is not -- * yet implemented. It should be dropped when the driver -- * is complete. -- */ -- pll6: pll6 { -+ pll6: clk@01c20028 { - #clock-cells = <0>; -- compatible = "fixed-clock"; -- clock-frequency = <0>; -+ compatible = "allwinner,sun6i-a31-pll6-clk"; -+ reg = <0x01c20028 0x4>; -+ clocks = <&osc24M>; -+ clock-output-names = "pll6"; - }; - - cpu: cpu@01c20050 { -@@ -192,6 +188,38 @@ - "apb2_uart1", "apb2_uart2", "apb2_uart3", - "apb2_uart4", "apb2_uart5"; - }; -+ -+ spi0_clk: clk@01c200a0 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c200a0 0x4>; -+ clocks = <&osc24M>, <&pll6>; -+ clock-output-names = "spi0"; -+ }; -+ -+ spi1_clk: clk@01c200a4 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c200a4 0x4>; -+ clocks = <&osc24M>, <&pll6>; -+ clock-output-names = "spi1"; -+ }; -+ -+ spi2_clk: clk@01c200a8 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c200a8 0x4>; -+ clocks = <&osc24M>, <&pll6>; -+ clock-output-names = "spi2"; -+ }; -+ -+ spi3_clk: clk@01c200ac { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-mod0-clk"; -+ reg = <0x01c200ac 0x4>; -+ clocks = <&osc24M>, <&pll6>; -+ clock-output-names = "spi3"; -+ }; - }; - - soc@01c00000 { --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/262-spi-add-a10-spi-driver.patch b/target/linux/sunxi/patches-3.13/262-spi-add-a10-spi-driver.patch deleted file mode 100644 index be2cce5f11..0000000000 --- a/target/linux/sunxi/patches-3.13/262-spi-add-a10-spi-driver.patch +++ /dev/null @@ -1,571 +0,0 @@ -From 67e7ba38902a28679bf6ee8fd82952ae6795f5f5 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Sat, 22 Feb 2014 22:35:53 +0100 -Subject: [PATCH] spi: sunxi: Add Allwinner A10 SPI controller driver - -The older Allwinner SoCs (A10, A13, A10s and A20) all have the same SPI -controller. - -Unfortunately, this SPI controller, even though quite similar, is significantly -different from the recently supported A31 SPI controller (different registers -offset, split/merged registers, etc.). Supporting both controllers in a single -driver would be unreasonable, hence the addition of a new driver. - -Like its more recent counterpart, it supports DMA, but the driver only does PIO -until we have a dmaengine driver for this platform. - -Signed-off-by: Maxime Ripard ---- - .../devicetree/bindings/spi/spi-sun4i.txt | 24 ++ - drivers/spi/Kconfig | 6 + - drivers/spi/Makefile | 1 + - drivers/spi/spi-sun4i.c | 477 +++++++++++++++++++++ - 4 files changed, 508 insertions(+) - create mode 100644 Documentation/devicetree/bindings/spi/spi-sun4i.txt - create mode 100644 drivers/spi/spi-sun4i.c - -diff --git a/Documentation/devicetree/bindings/spi/spi-sun4i.txt b/Documentation/devicetree/bindings/spi/spi-sun4i.txt -new file mode 100644 -index 0000000..de827f5 ---- /dev/null -+++ b/Documentation/devicetree/bindings/spi/spi-sun4i.txt -@@ -0,0 +1,24 @@ -+Allwinner A10 SPI controller -+ -+Required properties: -+- compatible: Should be "allwinner,sun4-a10-spi". -+- reg: Should contain register location and length. -+- interrupts: Should contain interrupt. -+- clocks: phandle to the clocks feeding the SPI controller. Two are -+ needed: -+ - "ahb": the gated AHB parent clock -+ - "mod": the parent module clock -+- clock-names: Must contain the clock names described just above -+ -+Example: -+ -+spi1: spi@01c06000 { -+ compatible = "allwinner,sun4i-a10-spi"; -+ reg = <0x01c06000 0x1000>; -+ interrupts = <11>; -+ clocks = <&ahb_gates 21>, <&spi1_clk>; -+ clock-names = "ahb", "mod"; -+ status = "disabled"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+}; -diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig -index 58530d3..78adfae 100644 ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -446,6 +446,12 @@ config SPI_SIRF - help - SPI driver for CSR SiRFprimaII SoCs - -+config SPI_SUN4I -+ tristate "Allwinner A10 SoCs SPI controller" -+ depends on ARCH_SUNXI || COMPILE_TEST -+ help -+ SPI driver for Allwinner sun4i, sun5i and sun7i SoCs -+ - config SPI_SUN6I - tristate "Allwinner A31 SPI controller" - depends on ARCH_SUNXI || COMPILE_TEST -diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile -index 13b6ccf..65f4993 100644 ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -70,6 +70,7 @@ obj-$(CONFIG_SPI_SH_HSPI) += spi-sh-hspi.o - obj-$(CONFIG_SPI_SH_MSIOF) += spi-sh-msiof.o - obj-$(CONFIG_SPI_SH_SCI) += spi-sh-sci.o - obj-$(CONFIG_SPI_SIRF) += spi-sirf.o -+obj-$(CONFIG_SPI_SUN4I) += spi-sun4i.o - obj-$(CONFIG_SPI_SUN6I) += spi-sun6i.o - obj-$(CONFIG_SPI_TEGRA114) += spi-tegra114.o - obj-$(CONFIG_SPI_TEGRA20_SFLASH) += spi-tegra20-sflash.o -diff --git a/drivers/spi/spi-sun4i.c b/drivers/spi/spi-sun4i.c -new file mode 100644 -index 0000000..3f82705 ---- /dev/null -+++ b/drivers/spi/spi-sun4i.c -@@ -0,0 +1,477 @@ -+/* -+ * Copyright (C) 2012 - 2014 Allwinner Tech -+ * Pan Nan -+ * -+ * Copyright (C) 2014 Maxime Ripard -+ * Maxime Ripard -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+#define SUN4I_FIFO_DEPTH 64 -+ -+#define SUN4I_RXDATA_REG 0x00 -+ -+#define SUN4I_TXDATA_REG 0x04 -+ -+#define SUN4I_CTL_REG 0x08 -+#define SUN4I_CTL_ENABLE BIT(0) -+#define SUN4I_CTL_MASTER BIT(1) -+#define SUN4I_CTL_CPHA BIT(2) -+#define SUN4I_CTL_CPOL BIT(3) -+#define SUN4I_CTL_CS_ACTIVE_LOW BIT(4) -+#define SUN4I_CTL_LMTF BIT(6) -+#define SUN4I_CTL_TF_RST BIT(8) -+#define SUN4I_CTL_RF_RST BIT(9) -+#define SUN4I_CTL_XCH BIT(10) -+#define SUN4I_CTL_CS_MASK 0x3000 -+#define SUN4I_CTL_CS(cs) (((cs) << 12) & SUN4I_CTL_CS_MASK) -+#define SUN4I_CTL_DHB BIT(15) -+#define SUN4I_CTL_CS_MANUAL BIT(16) -+#define SUN4I_CTL_CS_LEVEL BIT(17) -+#define SUN4I_CTL_TP BIT(18) -+ -+#define SUN4I_INT_CTL_REG 0x0c -+#define SUN4I_INT_CTL_TC BIT(16) -+ -+#define SUN4I_INT_STA_REG 0x10 -+ -+#define SUN4I_DMA_CTL_REG 0x14 -+ -+#define SUN4I_WAIT_REG 0x18 -+ -+#define SUN4I_CLK_CTL_REG 0x1c -+#define SUN4I_CLK_CTL_CDR2_MASK 0xff -+#define SUN4I_CLK_CTL_CDR2(div) ((div) & SUN4I_CLK_CTL_CDR2_MASK) -+#define SUN4I_CLK_CTL_CDR1_MASK 0xf -+#define SUN4I_CLK_CTL_CDR1(div) (((div) & SUN4I_CLK_CTL_CDR1_MASK) << 8) -+#define SUN4I_CLK_CTL_DRS BIT(12) -+ -+#define SUN4I_BURST_CNT_REG 0x20 -+#define SUN4I_BURST_CNT(cnt) ((cnt) & 0xffffff) -+ -+#define SUN4I_XMIT_CNT_REG 0x24 -+#define SUN4I_XMIT_CNT(cnt) ((cnt) & 0xffffff) -+ -+#define SUN4I_FIFO_STA_REG 0x28 -+#define SUN4I_FIFO_STA_RF_CNT_MASK 0x7f -+#define SUN4I_FIFO_STA_RF_CNT_BITS 0 -+#define SUN4I_FIFO_STA_TF_CNT_MASK 0x7f -+#define SUN4I_FIFO_STA_TF_CNT_BITS 16 -+ -+struct sun4i_spi { -+ struct spi_master *master; -+ void __iomem *base_addr; -+ struct clk *hclk; -+ struct clk *mclk; -+ -+ struct completion done; -+ -+ const u8 *tx_buf; -+ u8 *rx_buf; -+ int len; -+}; -+ -+static inline u32 sun4i_spi_read(struct sun4i_spi *sspi, u32 reg) -+{ -+ return readl(sspi->base_addr + reg); -+} -+ -+static inline void sun4i_spi_write(struct sun4i_spi *sspi, u32 reg, u32 value) -+{ -+ writel(value, sspi->base_addr + reg); -+} -+ -+static inline void sun4i_spi_drain_fifo(struct sun4i_spi *sspi, int len) -+{ -+ u32 reg, cnt; -+ u8 byte; -+ -+ /* See how much data is available */ -+ reg = sun4i_spi_read(sspi, SUN4I_FIFO_STA_REG); -+ reg &= SUN4I_FIFO_STA_RF_CNT_MASK; -+ cnt = reg >> SUN4I_FIFO_STA_RF_CNT_BITS; -+ -+ if (len > cnt) -+ len = cnt; -+ -+ while (len--) { -+ byte = readb(sspi->base_addr + SUN4I_RXDATA_REG); -+ if (sspi->rx_buf) -+ *sspi->rx_buf++ = byte; -+ } -+} -+ -+static inline void sun4i_spi_fill_fifo(struct sun4i_spi *sspi, int len) -+{ -+ u8 byte; -+ -+ if (len > sspi->len) -+ len = sspi->len; -+ -+ while (len--) { -+ byte = sspi->tx_buf ? *sspi->tx_buf++ : 0; -+ writeb(byte, sspi->base_addr + SUN4I_TXDATA_REG); -+ sspi->len--; -+ } -+} -+ -+static void sun4i_spi_set_cs(struct spi_device *spi, bool enable) -+{ -+ struct sun4i_spi *sspi = spi_master_get_devdata(spi->master); -+ u32 reg; -+ -+ reg = sun4i_spi_read(sspi, SUN4I_CTL_REG); -+ -+ reg &= ~SUN4I_CTL_CS_MASK; -+ reg |= SUN4I_CTL_CS(spi->chip_select); -+ -+ if (enable) -+ reg |= SUN4I_CTL_CS_LEVEL; -+ else -+ reg &= ~SUN4I_CTL_CS_LEVEL; -+ -+ /* -+ * Even though this looks irrelevant since we are supposed to -+ * be controlling the chip select manually, this bit also -+ * controls the levels of the chip select for inactive -+ * devices. -+ * -+ * If we don't set it, the chip select level will go low by -+ * default when the device is idle, which is not really -+ * expected in the common case where the chip select is active -+ * low. -+ */ -+ if (spi->mode & SPI_CS_HIGH) -+ reg &= ~SUN4I_CTL_CS_ACTIVE_LOW; -+ else -+ reg |= SUN4I_CTL_CS_ACTIVE_LOW; -+ -+ sun4i_spi_write(sspi, SUN4I_CTL_REG, reg); -+} -+ -+static int sun4i_spi_transfer_one(struct spi_master *master, -+ struct spi_device *spi, -+ struct spi_transfer *tfr) -+{ -+ struct sun4i_spi *sspi = spi_master_get_devdata(master); -+ unsigned int mclk_rate, div, timeout; -+ unsigned int tx_len = 0; -+ int ret = 0; -+ u32 reg; -+ -+ /* We don't support transfer larger than the FIFO */ -+ if (tfr->len > SUN4I_FIFO_DEPTH) -+ return -EINVAL; -+ -+ reinit_completion(&sspi->done); -+ sspi->tx_buf = tfr->tx_buf; -+ sspi->rx_buf = tfr->rx_buf; -+ sspi->len = tfr->len; -+ -+ /* Clear pending interrupts */ -+ sun4i_spi_write(sspi, SUN4I_INT_STA_REG, ~0); -+ -+ -+ reg = sun4i_spi_read(sspi, SUN4I_CTL_REG); -+ -+ /* Reset FIFOs */ -+ sun4i_spi_write(sspi, SUN4I_CTL_REG, -+ reg | SUN4I_CTL_RF_RST | SUN4I_CTL_TF_RST); -+ -+ /* -+ * Setup the transfer control register: Chip Select, -+ * polarities, etc. -+ */ -+ if (spi->mode & SPI_CPOL) -+ reg |= SUN4I_CTL_CPOL; -+ else -+ reg &= ~SUN4I_CTL_CPOL; -+ -+ if (spi->mode & SPI_CPHA) -+ reg |= SUN4I_CTL_CPHA; -+ else -+ reg &= ~SUN4I_CTL_CPHA; -+ -+ if (spi->mode & SPI_LSB_FIRST) -+ reg |= SUN4I_CTL_LMTF; -+ else -+ reg &= ~SUN4I_CTL_LMTF; -+ -+ -+ /* -+ * If it's a TX only transfer, we don't want to fill the RX -+ * FIFO with bogus data -+ */ -+ if (sspi->rx_buf) -+ reg &= ~SUN4I_CTL_DHB; -+ else -+ reg |= SUN4I_CTL_DHB; -+ -+ /* We want to control the chip select manually */ -+ reg |= SUN4I_CTL_CS_MANUAL; -+ -+ sun4i_spi_write(sspi, SUN4I_CTL_REG, reg); -+ -+ /* Ensure that we have a parent clock fast enough */ -+ mclk_rate = clk_get_rate(sspi->mclk); -+ if (mclk_rate < (2 * spi->max_speed_hz)) { -+ clk_set_rate(sspi->mclk, 2 * spi->max_speed_hz); -+ mclk_rate = clk_get_rate(sspi->mclk); -+ } -+ -+ /* -+ * Setup clock divider. -+ * -+ * We have two choices there. Either we can use the clock -+ * divide rate 1, which is calculated thanks to this formula: -+ * SPI_CLK = MOD_CLK / (2 ^ (cdr + 1)) -+ * Or we can use CDR2, which is calculated with the formula: -+ * SPI_CLK = MOD_CLK / (2 * (cdr + 1)) -+ * Wether we use the former or the latter is set through the -+ * DRS bit. -+ * -+ * First try CDR2, and if we can't reach the expected -+ * frequency, fall back to CDR1. -+ */ -+ div = mclk_rate / (2 * spi->max_speed_hz); -+ if (div <= (SUN4I_CLK_CTL_CDR2_MASK + 1)) { -+ if (div > 0) -+ div--; -+ -+ reg = SUN4I_CLK_CTL_CDR2(div) | SUN4I_CLK_CTL_DRS; -+ } else { -+ div = ilog2(mclk_rate) - ilog2(spi->max_speed_hz); -+ reg = SUN4I_CLK_CTL_CDR1(div); -+ } -+ -+ sun4i_spi_write(sspi, SUN4I_CLK_CTL_REG, reg); -+ -+ /* Setup the transfer now... */ -+ if (sspi->tx_buf) -+ tx_len = tfr->len; -+ -+ /* Setup the counters */ -+ sun4i_spi_write(sspi, SUN4I_BURST_CNT_REG, SUN4I_BURST_CNT(tfr->len)); -+ sun4i_spi_write(sspi, SUN4I_XMIT_CNT_REG, SUN4I_XMIT_CNT(tx_len)); -+ -+ /* Fill the TX FIFO */ -+ sun4i_spi_fill_fifo(sspi, SUN4I_FIFO_DEPTH); -+ -+ /* Enable the interrupts */ -+ sun4i_spi_write(sspi, SUN4I_INT_CTL_REG, SUN4I_INT_CTL_TC); -+ -+ /* Start the transfer */ -+ reg = sun4i_spi_read(sspi, SUN4I_CTL_REG); -+ sun4i_spi_write(sspi, SUN4I_CTL_REG, reg | SUN4I_CTL_XCH); -+ -+ timeout = wait_for_completion_timeout(&sspi->done, -+ msecs_to_jiffies(1000)); -+ if (!timeout) { -+ ret = -ETIMEDOUT; -+ goto out; -+ } -+ -+ sun4i_spi_drain_fifo(sspi, SUN4I_FIFO_DEPTH); -+ -+out: -+ sun4i_spi_write(sspi, SUN4I_INT_CTL_REG, 0); -+ -+ return ret; -+} -+ -+static irqreturn_t sun4i_spi_handler(int irq, void *dev_id) -+{ -+ struct sun4i_spi *sspi = dev_id; -+ u32 status = sun4i_spi_read(sspi, SUN4I_INT_STA_REG); -+ -+ /* Transfer complete */ -+ if (status & SUN4I_INT_CTL_TC) { -+ sun4i_spi_write(sspi, SUN4I_INT_STA_REG, SUN4I_INT_CTL_TC); -+ complete(&sspi->done); -+ return IRQ_HANDLED; -+ } -+ -+ return IRQ_NONE; -+} -+ -+static int sun4i_spi_runtime_resume(struct device *dev) -+{ -+ struct spi_master *master = dev_get_drvdata(dev); -+ struct sun4i_spi *sspi = spi_master_get_devdata(master); -+ int ret; -+ -+ ret = clk_prepare_enable(sspi->hclk); -+ if (ret) { -+ dev_err(dev, "Couldn't enable AHB clock\n"); -+ goto out; -+ } -+ -+ ret = clk_prepare_enable(sspi->mclk); -+ if (ret) { -+ dev_err(dev, "Couldn't enable module clock\n"); -+ goto err; -+ } -+ -+ sun4i_spi_write(sspi, SUN4I_CTL_REG, -+ SUN4I_CTL_ENABLE | SUN4I_CTL_MASTER | SUN4I_CTL_TP); -+ -+ return 0; -+ -+err: -+ clk_disable_unprepare(sspi->hclk); -+out: -+ return ret; -+} -+ -+static int sun4i_spi_runtime_suspend(struct device *dev) -+{ -+ struct spi_master *master = dev_get_drvdata(dev); -+ struct sun4i_spi *sspi = spi_master_get_devdata(master); -+ -+ clk_disable_unprepare(sspi->mclk); -+ clk_disable_unprepare(sspi->hclk); -+ -+ return 0; -+} -+ -+static int sun4i_spi_probe(struct platform_device *pdev) -+{ -+ struct spi_master *master; -+ struct sun4i_spi *sspi; -+ struct resource *res; -+ int ret = 0, irq; -+ -+ master = spi_alloc_master(&pdev->dev, sizeof(struct sun4i_spi)); -+ if (!master) { -+ dev_err(&pdev->dev, "Unable to allocate SPI Master\n"); -+ return -ENOMEM; -+ } -+ -+ platform_set_drvdata(pdev, master); -+ sspi = spi_master_get_devdata(master); -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ sspi->base_addr = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(sspi->base_addr)) { -+ ret = PTR_ERR(sspi->base_addr); -+ goto err_free_master; -+ } -+ -+ irq = platform_get_irq(pdev, 0); -+ if (irq < 0) { -+ dev_err(&pdev->dev, "No spi IRQ specified\n"); -+ ret = -ENXIO; -+ goto err_free_master; -+ } -+ -+ ret = devm_request_irq(&pdev->dev, irq, sun4i_spi_handler, -+ 0, "sun4i-spi", sspi); -+ if (ret) { -+ dev_err(&pdev->dev, "Cannot request IRQ\n"); -+ goto err_free_master; -+ } -+ -+ sspi->master = master; -+ master->set_cs = sun4i_spi_set_cs; -+ master->transfer_one = sun4i_spi_transfer_one; -+ master->num_chipselect = 4; -+ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST; -+ master->dev.of_node = pdev->dev.of_node; -+ master->auto_runtime_pm = true; -+ -+ sspi->hclk = devm_clk_get(&pdev->dev, "ahb"); -+ if (IS_ERR(sspi->hclk)) { -+ dev_err(&pdev->dev, "Unable to acquire AHB clock\n"); -+ ret = PTR_ERR(sspi->hclk); -+ goto err_free_master; -+ } -+ -+ sspi->mclk = devm_clk_get(&pdev->dev, "mod"); -+ if (IS_ERR(sspi->mclk)) { -+ dev_err(&pdev->dev, "Unable to acquire module clock\n"); -+ ret = PTR_ERR(sspi->mclk); -+ goto err_free_master; -+ } -+ -+ init_completion(&sspi->done); -+ -+ /* -+ * This wake-up/shutdown pattern is to be able to have the -+ * device woken up, even if runtime_pm is disabled -+ */ -+ ret = sun4i_spi_runtime_resume(&pdev->dev); -+ if (ret) { -+ dev_err(&pdev->dev, "Couldn't resume the device\n"); -+ goto err_free_master; -+ } -+ -+ pm_runtime_set_active(&pdev->dev); -+ pm_runtime_enable(&pdev->dev); -+ pm_runtime_idle(&pdev->dev); -+ -+ ret = devm_spi_register_master(&pdev->dev, master); -+ if (ret) { -+ dev_err(&pdev->dev, "cannot register SPI master\n"); -+ goto err_pm_disable; -+ } -+ -+ return 0; -+ -+err_pm_disable: -+ pm_runtime_disable(&pdev->dev); -+ sun4i_spi_runtime_suspend(&pdev->dev); -+err_free_master: -+ spi_master_put(master); -+ return ret; -+} -+ -+static int sun4i_spi_remove(struct platform_device *pdev) -+{ -+ pm_runtime_disable(&pdev->dev); -+ -+ return 0; -+} -+ -+static const struct of_device_id sun4i_spi_match[] = { -+ { .compatible = "allwinner,sun4i-a10-spi", }, -+ {} -+}; -+MODULE_DEVICE_TABLE(of, sun4i_spi_match); -+ -+static const struct dev_pm_ops sun4i_spi_pm_ops = { -+ .runtime_resume = sun4i_spi_runtime_resume, -+ .runtime_suspend = sun4i_spi_runtime_suspend, -+}; -+ -+static struct platform_driver sun4i_spi_driver = { -+ .probe = sun4i_spi_probe, -+ .remove = sun4i_spi_remove, -+ .driver = { -+ .name = "sun4i-spi", -+ .owner = THIS_MODULE, -+ .of_match_table = sun4i_spi_match, -+ .pm = &sun4i_spi_pm_ops, -+ }, -+}; -+module_platform_driver(sun4i_spi_driver); -+ -+MODULE_AUTHOR("Pan Nan "); -+MODULE_AUTHOR("Maxime Ripard "); -+MODULE_DESCRIPTION("Allwinner A1X/A20 SPI controller driver"); -+MODULE_LICENSE("GPL"); --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/263-1-dt-sun7i-add-a20-spi.patch b/target/linux/sunxi/patches-3.13/263-1-dt-sun7i-add-a20-spi.patch deleted file mode 100644 index 8d43f621ee..0000000000 --- a/target/linux/sunxi/patches-3.13/263-1-dt-sun7i-add-a20-spi.patch +++ /dev/null @@ -1,85 +0,0 @@ -From 3fff6e0d2bdd3b3f999a9dfcc8432ecba56eaad8 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Sat, 22 Feb 2014 22:35:54 +0100 -Subject: [PATCH] ARM: dt: sun7i: Add A20 SPI controller nodes - -The A20 has 4 SPI controllers compatible with the one found in the A10. Add -them in the DT. - -Signed-off-by: Maxime Ripard ---- - arch/arm/boot/dts/sun7i-a20.dtsi | 44 ++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 44 insertions(+) - -diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi -index 1961751..bcea04a 100644 ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -393,6 +393,28 @@ - #size-cells = <1>; - ranges; - -+ spi0: spi@01c05000 { -+ compatible = "allwinner,sun4i-a10-spi"; -+ reg = <0x01c05000 0x1000>; -+ interrupts = <0 10 4>; -+ clocks = <&ahb_gates 20>, <&spi0_clk>; -+ clock-names = "ahb", "mod"; -+ status = "disabled"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ }; -+ -+ spi1: spi@01c06000 { -+ compatible = "allwinner,sun4i-a10-spi"; -+ reg = <0x01c06000 0x1000>; -+ interrupts = <0 11 4>; -+ clocks = <&ahb_gates 21>, <&spi1_clk>; -+ clock-names = "ahb", "mod"; -+ status = "disabled"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ }; -+ - emac: ethernet@01c0b000 { - compatible = "allwinner,sun4i-a10-emac"; - reg = <0x01c0b000 0x1000>; -@@ -485,6 +507,17 @@ - status = "disabled"; - }; - -+ spi2: spi@01c17000 { -+ compatible = "allwinner,sun4i-a10-spi"; -+ reg = <0x01c17000 0x1000>; -+ interrupts = <0 12 4>; -+ clocks = <&ahb_gates 22>, <&spi2_clk>; -+ clock-names = "ahb", "mod"; -+ status = "disabled"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ }; -+ - ahci: sata@01c18000 { - compatible = "allwinner,sun4i-a10-ahci"; - reg = <0x01c18000 0x1000>; -@@ -513,6 +546,17 @@ - status = "disabled"; - }; - -+ spi3: spi@01c1f000 { -+ compatible = "allwinner,sun4i-a10-spi"; -+ reg = <0x01c1f000 0x1000>; -+ interrupts = <0 50 4>; -+ clocks = <&ahb_gates 23>, <&spi3_clk>; -+ clock-names = "ahb", "mod"; -+ status = "disabled"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ }; -+ - pio: pinctrl@01c20800 { - compatible = "allwinner,sun7i-a20-pinctrl"; - reg = <0x01c20800 0x400>; --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/263-2-dt-sun4i-add-a10-spi.patch b/target/linux/sunxi/patches-3.13/263-2-dt-sun4i-add-a10-spi.patch deleted file mode 100644 index 4848688ba2..0000000000 --- a/target/linux/sunxi/patches-3.13/263-2-dt-sun4i-add-a10-spi.patch +++ /dev/null @@ -1,84 +0,0 @@ -From f21f034bd5b288068e1fa35c28d5e48e9ae8cbf5 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Sat, 22 Feb 2014 22:35:55 +0100 -Subject: [PATCH] ARM: dt: sun4i: Add A10 SPI controller nodes - -The A10 has 4 SPI controllers that are now supported. Add them in the DT. - -Signed-off-by: Maxime Ripard ---- - arch/arm/boot/dts/sun4i-a10.dtsi | 44 ++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 44 insertions(+) - -diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi -index 3a5775c..cdd5b72 100644 ---- a/arch/arm/boot/dts/sun4i-a10.dtsi -+++ b/arch/arm/boot/dts/sun4i-a10.dtsi -@@ -331,6 +331,28 @@ - #size-cells = <1>; - ranges; - -+ spi0: spi@01c05000 { -+ compatible = "allwinner,sun4i-a10-spi"; -+ reg = <0x01c05000 0x1000>; -+ interrupts = <10>; -+ clocks = <&ahb_gates 20>, <&spi0_clk>; -+ clock-names = "ahb", "mod"; -+ status = "disabled"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ }; -+ -+ spi1: spi@01c06000 { -+ compatible = "allwinner,sun4i-a10-spi"; -+ reg = <0x01c06000 0x1000>; -+ interrupts = <11>; -+ clocks = <&ahb_gates 21>, <&spi1_clk>; -+ clock-names = "ahb", "mod"; -+ status = "disabled"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ }; -+ - emac: ethernet@01c0b000 { - compatible = "allwinner,sun4i-a10-emac"; - reg = <0x01c0b000 0x1000>; -@@ -423,6 +445,17 @@ - status = "disabled"; - }; - -+ spi2: spi@01c17000 { -+ compatible = "allwinner,sun4i-a10-spi"; -+ reg = <0x01c17000 0x1000>; -+ interrupts = <12>; -+ clocks = <&ahb_gates 22>, <&spi2_clk>; -+ clock-names = "ahb", "mod"; -+ status = "disabled"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ }; -+ - ahci: sata@01c18000 { - compatible = "allwinner,sun4i-a10-ahci"; - reg = <0x01c18000 0x1000>; -@@ -451,6 +484,17 @@ - status = "disabled"; - }; - -+ spi3: spi@01c1f000 { -+ compatible = "allwinner,sun4i-a10-spi"; -+ reg = <0x01c1f000 0x1000>; -+ interrupts = <50>; -+ clocks = <&ahb_gates 23>, <&spi3_clk>; -+ clock-names = "ahb", "mod"; -+ status = "disabled"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ }; -+ - intc: interrupt-controller@01c20400 { - compatible = "allwinner,sun4i-ic"; - reg = <0x01c20400 0x400>; --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/263-3-dt-sun5i-a10s-add-a10-spi.patch b/target/linux/sunxi/patches-3.13/263-3-dt-sun5i-a10s-add-a10-spi.patch deleted file mode 100644 index 46ee7d2107..0000000000 --- a/target/linux/sunxi/patches-3.13/263-3-dt-sun5i-a10s-add-a10-spi.patch +++ /dev/null @@ -1,67 +0,0 @@ -From f76e72a20510fa17934c82bed5e23f7c4a4f2931 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Sat, 22 Feb 2014 22:35:56 +0100 -Subject: [PATCH] ARM: dt: sun5i: Add A10s SPI controller nodes - -The A10s has 3 SPI controllers compatible with the one found in the A10. Add -them in the DT. - -Signed-off-by: Maxime Ripard ---- - arch/arm/boot/dts/sun5i-a10s.dtsi | 33 +++++++++++++++++++++++++++++++++ - 1 file changed, 33 insertions(+) - -diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi -index e5064dc..2dedb7c 100644 ---- a/arch/arm/boot/dts/sun5i-a10s.dtsi -+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi -@@ -292,6 +292,28 @@ - #size-cells = <1>; - ranges; - -+ spi0: spi@01c05000 { -+ compatible = "allwinner,sun4i-a10-spi"; -+ reg = <0x01c05000 0x1000>; -+ interrupts = <10>; -+ clocks = <&ahb_gates 20>, <&spi0_clk>; -+ clock-names = "ahb", "mod"; -+ status = "disabled"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ }; -+ -+ spi1: spi@01c06000 { -+ compatible = "allwinner,sun4i-a10-spi"; -+ reg = <0x01c06000 0x1000>; -+ interrupts = <11>; -+ clocks = <&ahb_gates 21>, <&spi1_clk>; -+ clock-names = "ahb", "mod"; -+ status = "disabled"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ }; -+ - emac: ethernet@01c0b000 { - compatible = "allwinner,sun4i-a10-emac"; - reg = <0x01c0b000 0x1000>; -@@ -373,6 +395,17 @@ - status = "disabled"; - }; - -+ spi2: spi@01c17000 { -+ compatible = "allwinner,sun4i-a10-spi"; -+ reg = <0x01c17000 0x1000>; -+ interrupts = <12>; -+ clocks = <&ahb_gates 22>, <&spi2_clk>; -+ clock-names = "ahb", "mod"; -+ status = "disabled"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ }; -+ - intc: interrupt-controller@01c20400 { - compatible = "allwinner,sun4i-ic"; - reg = <0x01c20400 0x400>; --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/263-4-dt-sun5i-a13-add-a10-spi.patch b/target/linux/sunxi/patches-3.13/263-4-dt-sun5i-a13-add-a10-spi.patch deleted file mode 100644 index 30bec686a8..0000000000 --- a/target/linux/sunxi/patches-3.13/263-4-dt-sun5i-a13-add-a10-spi.patch +++ /dev/null @@ -1,67 +0,0 @@ -From a02b2ef06a3f11d2e6c20c2cdcdd6f0b4217d234 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Sat, 22 Feb 2014 22:35:57 +0100 -Subject: [PATCH] ARM: dt: sun5i: Add A13 SPI controller nodes - -The A13 has 3 SPI controllers compatible with the one found in the A10. Add -them in the DT. - -Signed-off-by: Maxime Ripard ---- - arch/arm/boot/dts/sun5i-a13.dtsi | 33 +++++++++++++++++++++++++++++++++ - 1 file changed, 33 insertions(+) - -diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi -index b0cc56c..1ff406b 100644 ---- a/arch/arm/boot/dts/sun5i-a13.dtsi -+++ b/arch/arm/boot/dts/sun5i-a13.dtsi -@@ -290,6 +290,28 @@ - #size-cells = <1>; - ranges; - -+ spi0: spi@01c05000 { -+ compatible = "allwinner,sun4i-a10-spi"; -+ reg = <0x01c05000 0x1000>; -+ interrupts = <10>; -+ clocks = <&ahb_gates 20>, <&spi0_clk>; -+ clock-names = "ahb", "mod"; -+ status = "disabled"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ }; -+ -+ spi1: spi@01c06000 { -+ compatible = "allwinner,sun4i-a10-spi"; -+ reg = <0x01c06000 0x1000>; -+ interrupts = <11>; -+ clocks = <&ahb_gates 21>, <&spi1_clk>; -+ clock-names = "ahb", "mod"; -+ status = "disabled"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ }; -+ - mmc0: mmc@01c0f000 { - compatible = "allwinner,sun5i-a13-mmc"; - reg = <0x01c0f000 0x1000>; -@@ -344,6 +366,17 @@ - status = "disabled"; - }; - -+ spi2: spi@01c17000 { -+ compatible = "allwinner,sun4i-a10-spi"; -+ reg = <0x01c17000 0x1000>; -+ interrupts = <12>; -+ clocks = <&ahb_gates 22>, <&spi2_clk>; -+ clock-names = "ahb", "mod"; -+ status = "disabled"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ }; -+ - intc: interrupt-controller@01c20400 { - compatible = "allwinner,sun4i-ic"; - reg = <0x01c20400 0x400>; --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/263-5-dt-sun7i-add-spi-muxing.patch b/target/linux/sunxi/patches-3.13/263-5-dt-sun7i-add-spi-muxing.patch deleted file mode 100644 index 9d2543cbd2..0000000000 --- a/target/linux/sunxi/patches-3.13/263-5-dt-sun7i-add-spi-muxing.patch +++ /dev/null @@ -1,38 +0,0 @@ -From eb9180f426a7da1da5ed0f3aa13b92609c869fc0 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Sat, 22 Feb 2014 22:35:58 +0100 -Subject: [PATCH] ARM: dt: sun7i: Add SPI muxing options - -Signed-off-by: Maxime Ripard ---- - arch/arm/boot/dts/sun7i-a20.dtsi | 14 ++++++++++++++ - 1 file changed, 14 insertions(+) - -diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi -index bcea04a..9f57035 100644 ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -688,6 +688,20 @@ - allwinner,drive = <2>; - allwinner,pull = <0>; - }; -+ -+ spi1_pins_a: spi1@0 { -+ allwinner,pins = "PI16", "PI17", "PI18", "PI19"; -+ allwinner,function = "spi1"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ spi2_pins_a: spi2@0 { -+ allwinner,pins = "PC19", "PC20", "PC21", "PC22"; -+ allwinner,function = "spi2"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; - }; - - timer@01c20c00 { --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/264-5-dt-sun7i-enable-spi-on-a20micro.patch b/target/linux/sunxi/patches-3.13/264-5-dt-sun7i-enable-spi-on-a20micro.patch deleted file mode 100644 index bebcbd0849..0000000000 --- a/target/linux/sunxi/patches-3.13/264-5-dt-sun7i-enable-spi-on-a20micro.patch +++ /dev/null @@ -1,46 +0,0 @@ -From 5c5ac3fb749c64e7c1e6e3208fcabab065359f56 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Sat, 22 Feb 2014 22:35:59 +0100 -Subject: [PATCH] ARM: dts: sun7i: Enable the SPI controllers of the - A20-olinuxino-micro - -The A20-Olinuxino-micro has two SPI bus exposed on its UEXT connectors, enable -them. - -Signed-off-by: Maxime Ripard ---- - arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 17 +++++++++++++++++ - 1 file changed, 17 insertions(+) - -diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts -index 824ce0a..68cedf3 100644 ---- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts -+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts -@@ -21,7 +21,24 @@ - model = "Olimex A20-Olinuxino Micro"; - compatible = "olimex,a20-olinuxino-micro", "allwinner,sun7i-a20"; - -+ aliases { -+ spi0 = &spi1; -+ spi1 = &spi2; -+ }; -+ - soc@01c00000 { -+ spi1: spi@01c06000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi1_pins_a>; -+ status = "okay"; -+ }; -+ -+ spi2: spi@01c17000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi2_pins_a>; -+ status = "okay"; -+ }; -+ - mmc0: mmc@01c0f000 { - pinctrl-names = "default", "default"; - pinctrl-0 = <&mmc0_pins_a>; --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/270-1-wdt-sunxi-introduce-new-compat.patch b/target/linux/sunxi/patches-3.13/270-1-wdt-sunxi-introduce-new-compat.patch deleted file mode 100644 index 7a4498b920..0000000000 --- a/target/linux/sunxi/patches-3.13/270-1-wdt-sunxi-introduce-new-compat.patch +++ /dev/null @@ -1,53 +0,0 @@ -From 111579574584c73a91c2b1bf8657c3691cc22409 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Sun, 2 Feb 2014 14:55:23 +0100 -Subject: [PATCH] wdt: sunxi: Introduce a new compatible for the A10 and A31 - -For historical reasons, the Allwinner A10 compatibles are not following the -patterns used for this other Allwinner SoCs. - -Introduce a new compatible following the usual pattern, and deprecate the olders. - -Signed-off-by: Maxime Ripard ---- - Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt | 7 ++++--- - drivers/watchdog/sunxi_wdt.c | 1 + - 2 files changed, 5 insertions(+), 3 deletions(-) - -diff --git a/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt b/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt -index e39cb26..6e8c937 100644 ---- a/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt -+++ b/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt -@@ -2,13 +2,14 @@ Allwinner SoCs Watchdog timer - - Required properties: - --- compatible : should be "allwinner,-wdt", the currently supported -- SoC families being sun4i and sun6i -+- compatible : should be either "allwinner,sun4i-a10-wdt" or -+ "allwinner,sun6i-a31-wdt" (deprecated: -+ "allwinner,sun4i-wdt", "allwinner,sun6i-wdt") - - reg : Specifies base physical address and size of the registers. - - Example: - - wdt: watchdog@01c20c90 { -- compatible = "allwinner,sun4i-wdt"; -+ compatible = "allwinner,sun4i-a10-wdt"; - reg = <0x01c20c90 0x10>; - }; -diff --git a/drivers/watchdog/sunxi_wdt.c b/drivers/watchdog/sunxi_wdt.c -index 76332d89..7c8923d 100644 ---- a/drivers/watchdog/sunxi_wdt.c -+++ b/drivers/watchdog/sunxi_wdt.c -@@ -206,6 +206,7 @@ static void sunxi_wdt_shutdown(struct platform_device *pdev) - - static const struct of_device_id sunxi_wdt_dt_ids[] = { - { .compatible = "allwinner,sun4i-wdt" }, -+ { .compatible = "allwinner,sun4i-a10-wdt" }, - { /* sentinel */ } - }; - MODULE_DEVICE_TABLE(of, sunxi_wdt_dt_ids); --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/270-2-wdt-sunxi-add-new-wdt-compats-into-reboot-code.patch b/target/linux/sunxi/patches-3.13/270-2-wdt-sunxi-add-new-wdt-compats-into-reboot-code.patch deleted file mode 100644 index 0150dfa114..0000000000 --- a/target/linux/sunxi/patches-3.13/270-2-wdt-sunxi-add-new-wdt-compats-into-reboot-code.patch +++ /dev/null @@ -1,31 +0,0 @@ -From b50ff681c8e3e9e408ee1fb6c6317bc8da653a01 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Sun, 2 Feb 2014 14:55:24 +0100 -Subject: [PATCH] ARM: sunxi: Add the new watchog compatibles to the reboot - code - -Now that the watchdog driver has new compatibles, we need to support them in -the machine reboot code too. - -Signed-off-by: Maxime Ripard ---- - arch/arm/mach-sunxi/sunxi.c | 2 ++ - 1 file changed, 2 insertions(+) - -diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c -index aeea6ce..c310df6 100644 ---- a/arch/arm/mach-sunxi/sunxi.c -+++ b/arch/arm/mach-sunxi/sunxi.c -@@ -95,7 +95,9 @@ static void sun6i_restart(enum reboot_mode mode, const char *cmd) - - static struct of_device_id sunxi_restart_ids[] = { - { .compatible = "allwinner,sun4i-wdt" }, -+ { .compatible = "allwinner,sun4i-a10-wdt" }, - { .compatible = "allwinner,sun6i-wdt" }, -+ { .compatible = "allwinner,sun6i-a31-wdt" }, - { /*sentinel*/ } - }; - --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/270-3-dt-sunxi-watchdog-update-compats.patch b/target/linux/sunxi/patches-3.13/270-3-dt-sunxi-watchdog-update-compats.patch deleted file mode 100644 index 843d0d69b8..0000000000 --- a/target/linux/sunxi/patches-3.13/270-3-dt-sunxi-watchdog-update-compats.patch +++ /dev/null @@ -1,86 +0,0 @@ -From 0dba36162dffdee935287645d515f53057de3537 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard -Date: Sun, 2 Feb 2014 14:55:25 +0100 -Subject: [PATCH] ARM: sunxi: dt: Update the watchdog compatibles - -The watchdog compatibles were following a different pattern than the one found -in the other devices. Now that the driver supports the right pattern, switch to -it in the DT. - -Signed-off-by: Maxime Ripard ---- - arch/arm/boot/dts/sun4i-a10.dtsi | 2 +- - arch/arm/boot/dts/sun5i-a10s.dtsi | 2 +- - arch/arm/boot/dts/sun5i-a13.dtsi | 2 +- - arch/arm/boot/dts/sun6i-a31.dtsi | 2 +- - arch/arm/boot/dts/sun7i-a20.dtsi | 2 +- - 5 files changed, 5 insertions(+), 5 deletions(-) - -diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi -index 80bbdeb..3a5775c 100644 ---- a/arch/arm/boot/dts/sun4i-a10.dtsi -+++ b/arch/arm/boot/dts/sun4i-a10.dtsi -@@ -545,7 +545,7 @@ - }; - - wdt: watchdog@01c20c90 { -- compatible = "allwinner,sun4i-wdt"; -+ compatible = "allwinner,sun4i-a10-wdt"; - reg = <0x01c20c90 0x10>; - }; - -diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi -index a5431ed..e5064dc 100644 ---- a/arch/arm/boot/dts/sun5i-a10s.dtsi -+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi -@@ -467,7 +467,7 @@ - }; - - wdt: watchdog@01c20c90 { -- compatible = "allwinner,sun4i-wdt"; -+ compatible = "allwinner,sun4i-a10-wdt"; - reg = <0x01c20c90 0x10>; - }; - -diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi -index 7fe9cdc..b0cc56c 100644 ---- a/arch/arm/boot/dts/sun5i-a13.dtsi -+++ b/arch/arm/boot/dts/sun5i-a13.dtsi -@@ -413,7 +413,7 @@ - }; - - wdt: watchdog@01c20c90 { -- compatible = "allwinner,sun4i-wdt"; -+ compatible = "allwinner,sun4i-a10-wdt"; - reg = <0x01c20c90 0x10>; - }; - -diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi -index b4407f17..c15f30e 100644 ---- a/arch/arm/boot/dts/sun6i-a31.dtsi -+++ b/arch/arm/boot/dts/sun6i-a31.dtsi -@@ -289,7 +289,7 @@ - }; - - wdt1: watchdog@01c20ca0 { -- compatible = "allwinner,sun6i-wdt"; -+ compatible = "allwinner,sun6i-a31-wdt"; - reg = <0x01c20ca0 0x20>; - }; - -diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi -index e67924a..1961751 100644 ---- a/arch/arm/boot/dts/sun7i-a20.dtsi -+++ b/arch/arm/boot/dts/sun7i-a20.dtsi -@@ -659,7 +659,7 @@ - }; - - wdt: watchdog@01c20c90 { -- compatible = "allwinner,sun4i-wdt"; -+ compatible = "allwinner,sun4i-a10-wdt"; - reg = <0x01c20c90 0x10>; - }; - --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/280-input-add-sun4i-ts-driver.patch b/target/linux/sunxi/patches-3.13/280-input-add-sun4i-ts-driver.patch deleted file mode 100644 index e42f0feeb7..0000000000 --- a/target/linux/sunxi/patches-3.13/280-input-add-sun4i-ts-driver.patch +++ /dev/null @@ -1,354 +0,0 @@ -From 328d21d9c56ddca56ed80b1595066b1621f6926b Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Mon, 23 Dec 2013 16:21:02 +0100 -Subject: [PATCH] input: Add new sun4i-ts driver for Allwinner sunxi SoC's rtp - controller - -Note the sun4i-ts controller is capable of detecting a second touch, but when -a second touch is present then the accuracy becomes so bad the reported touch -location is not useable. - -The original android driver contains some complicated heuristics using the -aprox. distance between the 2 touches to see if the user is making a pinch -open / close movement, and then reports emulated multi-touch events around -the last touch coordinate (as the dual-touch coordinates are worthless). - -These kinds of heuristics are just asking for trouble (and don't belong -in the kernel). So this driver offers straight forward, reliable single -touch functionality only. - -Signed-off-by: Hans de Goede ---- - .../bindings/input/touchscreen/sun4i.txt | 15 ++ - drivers/input/touchscreen/Kconfig | 10 + - drivers/input/touchscreen/Makefile | 1 + - drivers/input/touchscreen/sun4i-ts.c | 262 +++++++++++++++++++++ - 4 files changed, 288 insertions(+) - create mode 100644 Documentation/devicetree/bindings/input/touchscreen/sun4i.txt - create mode 100644 drivers/input/touchscreen/sun4i-ts.c - -diff --git a/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt b/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt -new file mode 100644 -index 0000000..e45927e ---- /dev/null -+++ b/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt -@@ -0,0 +1,15 @@ -+sun4i resistive touchscreen controller -+-------------------------------------- -+ -+Required properties: -+ - compatible: "allwinner,sun4i-ts" -+ - reg: mmio address range of the chip -+ - interrupts: interrupt to which the chip is connected -+ -+Example: -+ -+ rtp: rtp@01c25000 { -+ compatible = "allwinner,sun4i-ts"; -+ reg = <0x01c25000 0x100>; -+ interrupts = <29>; -+ }; -diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig -index 07e9e82..f4c5ca3 100644 ---- a/drivers/input/touchscreen/Kconfig -+++ b/drivers/input/touchscreen/Kconfig -@@ -906,6 +906,16 @@ config TOUCHSCREEN_STMPE - To compile this driver as a module, choose M here: the - module will be called stmpe-ts. - -+config TOUCHSCREEN_SUN4I -+ tristate "Allwinner sun4i resistive touchscreen controller support" -+ depends on ARCH_SUNXI -+ help -+ This selects support for the resistive touchscreen controller -+ found on Allwinner sunxi SoCs. -+ -+ To compile this driver as a module, choose M here: the -+ module will be called sun4i-ts. -+ - config TOUCHSCREEN_SUR40 - tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen" - depends on USB -diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile -index 62801f2..c8f7375 100644 ---- a/drivers/input/touchscreen/Makefile -+++ b/drivers/input/touchscreen/Makefile -@@ -54,6 +54,7 @@ obj-$(CONFIG_TOUCHSCREEN_PIXCIR) += pixcir_i2c_ts.o - obj-$(CONFIG_TOUCHSCREEN_S3C2410) += s3c2410_ts.o - obj-$(CONFIG_TOUCHSCREEN_ST1232) += st1232.o - obj-$(CONFIG_TOUCHSCREEN_STMPE) += stmpe-ts.o -+obj-$(CONFIG_TOUCHSCREEN_SUN4I) += sun4i-ts.o - obj-$(CONFIG_TOUCHSCREEN_SUR40) += sur40.o - obj-$(CONFIG_TOUCHSCREEN_TI_AM335X_TSC) += ti_am335x_tsc.o - obj-$(CONFIG_TOUCHSCREEN_TNETV107X) += tnetv107x-ts.o -diff --git a/drivers/input/touchscreen/sun4i-ts.c b/drivers/input/touchscreen/sun4i-ts.c -new file mode 100644 -index 0000000..5945219 ---- /dev/null -+++ b/drivers/input/touchscreen/sun4i-ts.c -@@ -0,0 +1,262 @@ -+/* -+ * Allwinner sunxi resistive touchscreen controller driver -+ * -+ * Copyright (C) 2013 - 2014 Hans de Goede -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+/* -+ * The sun4i-ts controller is capable of detecting a second touch, but when a -+ * second touch is present then the accuracy becomes so bad the reported touch -+ * location is not useable. -+ * -+ * The original android driver contains some complicated heuristics using the -+ * aprox. distance between the 2 touches to see if the user is making a pinch -+ * open / close movement, and then reports emulated multi-touch events around -+ * the last touch coordinate (as the dual-touch coordinates are worthless). -+ * -+ * These kinds of heuristics are just asking for trouble (and don't belong -+ * in the kernel). So this driver offers straight forward, reliable single -+ * touch functionality only. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define TP_CTRL0 0x00 -+#define TP_CTRL1 0x04 -+#define TP_CTRL2 0x08 -+#define TP_CTRL3 0x0c -+#define TP_INT_FIFOC 0x10 -+#define TP_INT_FIFOS 0x14 -+#define TP_TPR 0x18 -+#define TP_CDAT 0x1c -+#define TEMP_DATA 0x20 -+#define TP_DATA 0x24 -+ -+/* TP_CTRL0 bits */ -+#define ADC_FIRST_DLY(x) ((x) << 24) /* 8 bits */ -+#define ADC_FIRST_DLY_MODE(x) ((x) << 23) -+#define ADC_CLK_SEL(x) ((x) << 22) -+#define ADC_CLK_DIV(x) ((x) << 20) /* 3 bits */ -+#define FS_DIV(x) ((x) << 16) /* 4 bits */ -+#define T_ACQ(x) ((x) << 0) /* 16 bits */ -+ -+/* TP_CTRL1 bits */ -+#define STYLUS_UP_DEBOUN(x) ((x) << 12) /* 8 bits */ -+#define STYLUS_UP_DEBOUN_EN(x) ((x) << 9) -+#define TOUCH_PAN_CALI_EN(x) ((x) << 6) -+#define TP_DUAL_EN(x) ((x) << 5) -+#define TP_MODE_EN(x) ((x) << 4) -+#define TP_ADC_SELECT(x) ((x) << 3) -+#define ADC_CHAN_SELECT(x) ((x) << 0) /* 3 bits */ -+ -+/* TP_CTRL2 bits */ -+#define TP_SENSITIVE_ADJUST(x) ((x) << 28) /* 4 bits */ -+#define TP_MODE_SELECT(x) ((x) << 26) /* 2 bits */ -+#define PRE_MEA_EN(x) ((x) << 24) -+#define PRE_MEA_THRE_CNT(x) ((x) << 0) /* 24 bits */ -+ -+/* TP_CTRL3 bits */ -+#define FILTER_EN(x) ((x) << 2) -+#define FILTER_TYPE(x) ((x) << 0) /* 2 bits */ -+ -+/* TP_INT_FIFOC irq and fifo mask / control bits */ -+#define TEMP_IRQ_EN(x) ((x) << 18) -+#define OVERRUN_IRQ_EN(x) ((x) << 17) -+#define DATA_IRQ_EN(x) ((x) << 16) -+#define TP_DATA_XY_CHANGE(x) ((x) << 13) -+#define FIFO_TRIG(x) ((x) << 8) /* 5 bits */ -+#define DATA_DRQ_EN(x) ((x) << 7) -+#define FIFO_FLUSH(x) ((x) << 4) -+#define TP_UP_IRQ_EN(x) ((x) << 1) -+#define TP_DOWN_IRQ_EN(x) ((x) << 0) -+ -+/* TP_INT_FIFOS irq and fifo status bits */ -+#define TEMP_DATA_PENDING BIT(18) -+#define FIFO_OVERRUN_PENDING BIT(17) -+#define FIFO_DATA_PENDING BIT(16) -+#define TP_IDLE_FLG BIT(2) -+#define TP_UP_PENDING BIT(1) -+#define TP_DOWN_PENDING BIT(0) -+ -+/* TP_TPR bits */ -+#define TEMP_ENABLE(x) ((x) << 16) -+#define TEMP_PERIOD(x) ((x) << 0) /* t = x * 256 * 16 / clkin */ -+ -+struct sun4i_ts_data { -+ struct device *dev; -+ struct input_dev *input; -+ void __iomem *base; -+ unsigned int irq; -+ bool ignore_fifo_data; -+}; -+ -+static irqreturn_t sun4i_ts_irq(int irq, void *dev_id) -+{ -+ struct sun4i_ts_data *ts = dev_id; -+ u32 reg_val, x, y; -+ -+ reg_val = readl(ts->base + TP_INT_FIFOS); -+ -+ if (reg_val & FIFO_DATA_PENDING) { -+ x = readl(ts->base + TP_DATA); -+ y = readl(ts->base + TP_DATA); -+ /* The 1st location reported after an up event is unreliable */ -+ if (!ts->ignore_fifo_data) { -+ input_report_abs(ts->input, ABS_X, x); -+ input_report_abs(ts->input, ABS_Y, y); -+ /* -+ * The hardware has a separate down status bit, but -+ * that gets set before we get the first location, -+ * resulting in reporting a click on the old location. -+ */ -+ input_report_key(ts->input, BTN_TOUCH, 1); -+ input_sync(ts->input); -+ } else { -+ ts->ignore_fifo_data = false; -+ } -+ } -+ -+ if (reg_val & TP_UP_PENDING) { -+ ts->ignore_fifo_data = true; -+ input_report_key(ts->input, BTN_TOUCH, 0); -+ input_sync(ts->input); -+ } -+ -+ writel(reg_val, ts->base + TP_INT_FIFOS); -+ -+ return IRQ_HANDLED; -+} -+ -+static int sun4i_ts_open(struct input_dev *dev) -+{ -+ struct sun4i_ts_data *ts = input_get_drvdata(dev); -+ -+ /* Flush, set trig level to 1, enable data and up irqs */ -+ writel(DATA_IRQ_EN(1) | FIFO_TRIG(1) | FIFO_FLUSH(1) | TP_UP_IRQ_EN(1), -+ ts->base + TP_INT_FIFOC); -+ -+ return 0; -+} -+ -+static void sun4i_ts_close(struct input_dev *dev) -+{ -+ struct sun4i_ts_data *ts = input_get_drvdata(dev); -+ -+ /* Deactivate all IRQs */ -+ writel(0, ts->base + TP_INT_FIFOC); -+} -+ -+static int sun4i_ts_probe(struct platform_device *pdev) -+{ -+ struct sun4i_ts_data *ts; -+ struct device *dev = &pdev->dev; -+ int ret; -+ -+ ts = devm_kzalloc(dev, sizeof(struct sun4i_ts_data), GFP_KERNEL); -+ if (!ts) -+ return -ENOMEM; -+ -+ ts->dev = dev; -+ ts->ignore_fifo_data = true; -+ -+ ts->input = devm_input_allocate_device(dev); -+ if (!ts->input) -+ return -ENOMEM; -+ -+ ts->input->name = pdev->name; -+ ts->input->phys = "sun4i_ts/input0"; -+ ts->input->open = sun4i_ts_open; -+ ts->input->close = sun4i_ts_close; -+ ts->input->id.bustype = BUS_HOST; -+ ts->input->id.vendor = 0x0001; -+ ts->input->id.product = 0x0001; -+ ts->input->id.version = 0x0100; -+ ts->input->evbit[0] = BIT(EV_SYN) | BIT(EV_KEY) | BIT(EV_ABS); -+ set_bit(BTN_TOUCH, ts->input->keybit); -+ input_set_abs_params(ts->input, ABS_X, 0, 4095, 0, 0); -+ input_set_abs_params(ts->input, ABS_Y, 0, 4095, 0, 0); -+ input_set_drvdata(ts->input, ts); -+ -+ ts->base = devm_ioremap_resource(dev, -+ platform_get_resource(pdev, IORESOURCE_MEM, 0)); -+ if (IS_ERR(ts->base)) -+ return PTR_ERR(ts->base); -+ -+ ts->irq = platform_get_irq(pdev, 0); -+ ret = devm_request_irq(dev, ts->irq, sun4i_ts_irq, 0, "sun4i-ts", ts); -+ if (ret) -+ return ret; -+ -+ /* -+ * Select HOSC clk, clkin = clk / 6, adc samplefreq = clkin / 8192, -+ * t_acq = clkin / (16 * 64) -+ */ -+ writel(ADC_CLK_SEL(0) | ADC_CLK_DIV(2) | FS_DIV(7) | T_ACQ(63), -+ ts->base + TP_CTRL0); -+ -+ /* -+ * sensitive_adjust = 15 : max, which is not all that sensitive, -+ * tp_mode = 0 : only x and y coordinates, as we don't use dual touch -+ */ -+ writel(TP_SENSITIVE_ADJUST(15) | TP_MODE_SELECT(0), -+ ts->base + TP_CTRL2); -+ -+ /* Enable median filter, type 1 : 5/3 */ -+ writel(FILTER_EN(1) | FILTER_TYPE(1), ts->base + TP_CTRL3); -+ -+ /* Enable temperature measurement, period 1953 (2 seconds) */ -+ writel(TEMP_ENABLE(1) | TEMP_PERIOD(1953), ts->base + TP_TPR); -+ -+ /* -+ * Set stylus up debounce to aprox 10 ms, enable debounce, and -+ * finally enable tp mode. -+ */ -+ writel(STYLUS_UP_DEBOUN(5) | STYLUS_UP_DEBOUN_EN(1) | TP_MODE_EN(1), -+ ts->base + TP_CTRL1); -+ -+ ret = input_register_device(ts->input); -+ if (ret) -+ return ret; -+ -+ platform_set_drvdata(pdev, ts); -+ return 0; -+} -+ -+static const struct of_device_id sun4i_ts_of_match[] = { -+ { .compatible = "allwinner,sun4i-ts", }, -+ { /* sentinel */ } -+}; -+MODULE_DEVICE_TABLE(of, sun4i_ts_of_match); -+ -+static struct platform_driver sun4i_ts_driver = { -+ .driver = { -+ .owner = THIS_MODULE, -+ .name = "sun4i-ts", -+ .of_match_table = of_match_ptr(sun4i_ts_of_match), -+ }, -+ .probe = sun4i_ts_probe, -+}; -+ -+module_platform_driver(sun4i_ts_driver); -+ -+MODULE_DESCRIPTION("Allwinner sun4i resistive touchscreen controller driver"); -+MODULE_AUTHOR("Hans de Goede "); -+MODULE_LICENSE("GPL"); --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/301-1-dt-sun4i-add-pcduino.patch b/target/linux/sunxi/patches-3.13/301-1-dt-sun4i-add-pcduino.patch deleted file mode 100644 index cca20c3e3c..0000000000 --- a/target/linux/sunxi/patches-3.13/301-1-dt-sun4i-add-pcduino.patch +++ /dev/null @@ -1,86 +0,0 @@ -From 248529e6c78ba746988f1313f7bfb7ae74eae785 Mon Sep 17 00:00:00 2001 -From: Zoltan HERPAI -Date: Mon, 13 Jan 2014 14:15:01 +0100 -Subject: [PATCH] ARM: sun4i: dt: Add basic board support for LinkSprite - pcDuino - -This patch will add a basic board support DT for the -LinkSprite pcDuino board. - -Signed-off-by: Zoltan HERPAI -Signed-off-by: Maxime Ripard ---- - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/sun4i-a10-pcduino.dts | 48 +++++++++++++++++++++++++++++++++ - 2 files changed, 49 insertions(+) - create mode 100644 arch/arm/boot/dts/sun4i-a10-pcduino.dts - -diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile -index 6d1e43d..0b127db 100644 ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -283,6 +283,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += \ - sun4i-a10-cubieboard.dtb \ - sun4i-a10-mini-xplus.dtb \ - sun4i-a10-hackberry.dtb \ -+ sun4i-a10-pcduino.dtb \ - sun5i-a10s-olinuxino-micro.dtb \ - sun5i-a13-olinuxino.dtb \ - sun5i-a13-olinuxino-micro.dtb \ -diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts -new file mode 100644 -index 0000000..f5692a3 ---- /dev/null -+++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts -@@ -0,0 +1,48 @@ -+/* -+ * Copyright 2014 Zoltan HERPAI -+ * Zoltan HERPAI -+ * -+ * The code contained herein is licensed under the GNU General Public -+ * License. You may obtain a copy of the GNU General Public License -+ * Version 2 or later at the following locations: -+ * -+ * http://www.opensource.org/licenses/gpl-license.html -+ * http://www.gnu.org/copyleft/gpl.html -+ */ -+ -+/dts-v1/; -+/include/ "sun4i-a10.dtsi" -+ -+/ { -+ model = "LinkSprite pcDuino"; -+ compatible = "linksprite,a10-pcduino", "allwinner,sun4i-a10"; -+ -+ soc@01c00000 { -+ emac: ethernet@01c0b000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&emac_pins_a>; -+ phy = <&phy1>; -+ status = "okay"; -+ }; -+ -+ mdio@01c0b080 { -+ status = "okay"; -+ -+ phy1: ethernet-phy@1 { -+ reg = <1>; -+ }; -+ }; -+ -+ uart0: serial@01c28000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart0_pins_a>; -+ status = "okay"; -+ }; -+ -+ i2c0: i2c@01c2ac00 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c0_pins_a>; -+ status = "okay"; -+ }; -+ }; -+}; --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/301-2-dt-sun4i-pcduino-add-mmc.patch b/target/linux/sunxi/patches-3.13/301-2-dt-sun4i-pcduino-add-mmc.patch deleted file mode 100644 index e028d120fa..0000000000 --- a/target/linux/sunxi/patches-3.13/301-2-dt-sun4i-pcduino-add-mmc.patch +++ /dev/null @@ -1,73 +0,0 @@ -From 54b9b9ab635ed8e643784402096524768f490f5d Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Sat, 11 Jan 2014 04:33:23 +0100 -Subject: [PATCH] ARM: sun4i: dt: Add mmc node to a few more boards - -Signed-off-by: Hans de Goede ---- - arch/arm/boot/dts/sun4i-a10-hackberry.dts | 9 +++++++++ - arch/arm/boot/dts/sun4i-a10-mini-xplus.dts | 8 ++++++++ - arch/arm/boot/dts/sun4i-a10-pcduino.dts | 8 ++++++++ - 3 files changed, 25 insertions(+) - -diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts -index 6692d336..2eb30d0 100644 ---- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts -+++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts -@@ -35,6 +35,15 @@ - }; - }; - -+ mmc0: mmc@01c0f000 { -+ pinctrl-names = "default", "default"; -+ pinctrl-0 = <&mmc0_pins_a>; -+ pinctrl-1 = <&mmc0_cd_pin_reference_design>; -+ cd-gpios = <&pio 7 1 0>; /* PH1 */ -+ cd-mode = <1>; -+ status = "okay"; -+ }; -+ - pio: pinctrl@01c20800 { - pinctrl-names = "default"; - pinctrl-0 = <&hackberry_hogs>; -diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts -index 70b3323..6dbe53c 100644 ---- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts -+++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts -@@ -19,6 +19,14 @@ - compatible = "pineriver,mini-xplus", "allwinner,sun4i-a10"; - - soc@01c00000 { -+ mmc0: mmc@01c0f000 { -+ pinctrl-names = "default", "default"; -+ pinctrl-0 = <&mmc0_pins_a>; -+ pinctrl-1 = <&mmc0_cd_pin_reference_design>; -+ cd-gpios = <&pio 7 1 0>; /* PH1 */ -+ status = "okay"; -+ }; -+ - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; -diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts -index f5692a3..87f7742 100644 ---- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts -+++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts -@@ -33,6 +33,14 @@ - }; - }; - -+ mmc0: mmc@01c0f000 { -+ pinctrl-names = "default", "default"; -+ pinctrl-0 = <&mmc0_pins_a>; -+ pinctrl-1 = <&mmc0_cd_pin_reference_design>; -+ cd-gpios = <&pio 7 1 0>; /* PH1 */ -+ status = "okay"; -+ }; -+ - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/301-3-dt-sun4i-pcduino-add-usb.patch b/target/linux/sunxi/patches-3.13/301-3-dt-sun4i-pcduino-add-usb.patch deleted file mode 100644 index c81008fa1a..0000000000 --- a/target/linux/sunxi/patches-3.13/301-3-dt-sun4i-pcduino-add-usb.patch +++ /dev/null @@ -1,58 +0,0 @@ -From 713c2957f8b9e49b2170c9e546d705c9c358faee Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Mon, 17 Feb 2014 20:41:04 +0100 -Subject: [PATCH] ARM: sun4i: dt: Add USB host nodes to pcduino.dts - -Signed-off-by: Hans de Goede ---- - arch/arm/boot/dts/sun4i-a10-pcduino.dts | 27 +++++++++++++++++++++++++++ - 1 file changed, 27 insertions(+) - -diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts -index 87f7742..3ccd357 100644 ---- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts -+++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts -@@ -12,6 +12,7 @@ - - /dts-v1/; - /include/ "sun4i-a10.dtsi" -+/include/ "sun4i-a10-usb-vbus-reg.dtsi" - - / { - model = "LinkSprite pcDuino"; -@@ -41,6 +42,32 @@ - status = "okay"; - }; - -+ usbphy: phy@01c13400 { -+ usb1_vbus-supply = <®_usb1_vbus>; -+ usb2_vbus-supply = <®_usb2_vbus>; -+ status = "okay"; -+ }; -+ -+ ehci0: usb@01c14000 { -+ status = "okay"; -+ }; -+ -+ ohci0: usb@01c14400 { -+ status = "okay"; -+ }; -+ -+ ahci: sata@01c18000 { -+ status = "okay"; -+ }; -+ -+ ehci1: usb@01c1c000 { -+ status = "okay"; -+ }; -+ -+ ohci1: usb@01c1c400 { -+ status = "okay"; -+ }; -+ - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/302-dt-sun4i-add-lime.patch b/target/linux/sunxi/patches-3.13/302-dt-sun4i-add-lime.patch deleted file mode 100644 index f6cbf1becd..0000000000 --- a/target/linux/sunxi/patches-3.13/302-dt-sun4i-add-lime.patch +++ /dev/null @@ -1,150 +0,0 @@ -From 75e7218e107016a4baae26c70a81b1111fc8c70b Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Fri, 10 Jan 2014 23:23:06 +0100 -Subject: [PATCH] ARM: sun4i: dt: Add sun4i-a10-olinuxino-lime.dtb - -This add support for the A10-OLinuXino-LIME: -https://www.olimex.com/Products/OLinuXino/A10/A10-OLinuXino-LIME - -A low cost Allwinner A10 based dev-board, with sata, ethernet, hdmi and 2x USB. - -Signed-off-by: Hans de Goede ---- - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts | 112 +++++++++++++++++++++++++ - 2 files changed, 113 insertions(+) - create mode 100644 arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts - -diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile -index 0b127db..c576de8 100644 ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -283,6 +283,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += \ - sun4i-a10-cubieboard.dtb \ - sun4i-a10-mini-xplus.dtb \ - sun4i-a10-hackberry.dtb \ -+ sun4i-a10-olinuxino-lime.dtb \ - sun4i-a10-pcduino.dtb \ - sun5i-a10s-olinuxino-micro.dtb \ - sun5i-a13-olinuxino.dtb \ -diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts -new file mode 100644 -index 0000000..3c076f2 ---- /dev/null -+++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts -@@ -0,0 +1,112 @@ -+/* -+ * Copyright 2014 - Hans de Goede -+ * -+ * The code contained herein is licensed under the GNU General Public -+ * License. You may obtain a copy of the GNU General Public License -+ * Version 2 or later at the following locations: -+ * -+ * http://www.opensource.org/licenses/gpl-license.html -+ * http://www.gnu.org/copyleft/gpl.html -+ */ -+ -+/dts-v1/; -+/include/ "sun4i-a10.dtsi" -+/include/ "sunxi-ahci-reg.dtsi" -+/include/ "sun4i-a10-usb-vbus-reg.dtsi" -+ -+/ { -+ model = "Olimex A10-OLinuXino-LIME"; -+ compatible = "olimex,a10-olinuxino-lime", "allwinner,sun4i-a10"; -+ -+ soc@01c00000 { -+ emac: ethernet@01c0b000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&emac_pins_a>; -+ phy = <&phy1>; -+ status = "okay"; -+ }; -+ -+ mdio@01c0b080 { -+ status = "okay"; -+ -+ phy1: ethernet-phy@1 { -+ reg = <1>; -+ }; -+ }; -+ -+ mmc0: mmc@01c0f000 { -+ pinctrl-names = "default", "default"; -+ pinctrl-0 = <&mmc0_pins_a>; -+ pinctrl-1 = <&mmc0_cd_pin_reference_design>; -+ cd-gpios = <&pio 7 1 0>; /* PH1 */ -+ cd-mode = <1>; -+ status = "okay"; -+ }; -+ -+ usbphy: phy@01c13400 { -+ usb1_vbus-supply = <®_usb1_vbus>; -+ usb2_vbus-supply = <®_usb2_vbus>; -+ status = "okay"; -+ }; -+ -+ ehci0: usb@01c14000 { -+ status = "okay"; -+ }; -+ -+ ohci0: usb@01c14400 { -+ status = "okay"; -+ }; -+ -+ ahci: sata@01c18000 { -+ target-supply = <®_ahci_5v>; -+ status = "okay"; -+ }; -+ -+ ehci1: usb@01c1c000 { -+ status = "okay"; -+ }; -+ -+ ohci1: usb@01c1c400 { -+ status = "okay"; -+ }; -+ -+ pinctrl@01c20800 { -+ ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { -+ allwinner,pins = "PC3"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ led_pins_olinuxinolime: led_pins@0 { -+ allwinner,pins = "PH2"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <1>; -+ allwinner,pull = <0>; -+ }; -+ }; -+ -+ uart0: serial@01c28000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart0_pins_a>; -+ status = "okay"; -+ }; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&led_pins_olinuxinolime>; -+ -+ green { -+ label = "a10-olinuxino-lime:green:usr"; -+ gpios = <&pio 7 2 0>; -+ default-state = "on"; -+ }; -+ }; -+ -+ reg_ahci_5v: ahci-5v { -+ pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>; -+ gpio = <&pio 2 3 0>; -+ }; -+}; --- -1.8.5.5 - diff --git a/target/linux/sunxi/patches-3.13/303-dt-add-pcduinov3.patch b/target/linux/sunxi/patches-3.13/303-dt-add-pcduinov3.patch deleted file mode 100644 index 46301adf6f..0000000000 --- a/target/linux/sunxi/patches-3.13/303-dt-add-pcduinov3.patch +++ /dev/null @@ -1,13 +0,0 @@ -diff -ruN old/arch/arm/boot/dts/Makefile new/arch/arm/boot/dts/Makefile ---- old/arch/arm/boot/dts/Makefile 2014-04-26 15:15:01.000000000 +0200 -+++ new/arch/arm/boot/dts/Makefile 2014-04-26 15:46:58.336223315 +0200 -@@ -292,7 +292,8 @@ - sun6i-a31-colombus.dtb \ - sun7i-a20-cubieboard2.dtb \ - sun7i-a20-cubietruck.dtb \ -- sun7i-a20-olinuxino-micro.dtb -+ sun7i-a20-olinuxino-micro.dtb \ -+ sun7i-a20-pcduino3.dtb - dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ - tegra20-iris-512.dtb \ - tegra20-medcom-wide.dtb \ diff --git a/target/linux/sunxi/patches-3.13/304-dt-add-bananapi.patch b/target/linux/sunxi/patches-3.13/304-dt-add-bananapi.patch deleted file mode 100644 index 71a8b3b237..0000000000 --- a/target/linux/sunxi/patches-3.13/304-dt-add-bananapi.patch +++ /dev/null @@ -1,11 +0,0 @@ -diff -ruN old/arch/arm/boot/dts/Makefile new/arch/arm/boot/dts/Makefile ---- old/arch/arm/boot/dts/Makefile 2014-04-28 22:20:54.000000000 +0200 -+++ new/arch/arm/boot/dts/Makefile 2014-06-01 17:28:54.187703560 +0200 -@@ -259,6 +259,7 @@ - sun5i-a13-olinuxino.dtb \ - sun5i-a13-olinuxino-micro.dtb \ - sun6i-a31-colombus.dtb \ -+ sun7i-a20-bananapi.dtb \ - sun7i-a20-cubieboard2.dtb \ - sun7i-a20-cubietruck.dtb \ - sun7i-a20-olinuxino-micro.dtb \ -- 2.34.1