From cf7dd65811401e3d13fe662f2713860bd8cdb499 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Wed, 8 May 2013 16:48:00 -0700 Subject: [PATCH] ARM: OMAP3: Beagle: Fix USB Host on beagle xM Ax/Bx On Beagle xM Rev. Ax/Bx, the USB power enable GPIO logic is reversed when compared to other revisions i.e. it is active high instead of active low. Use the beagle_config.usb_pwr_level flag correctly so that the power regulator can be configured at runtime. Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-omap3beagle.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 6de78605c0af..04c116555412 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -112,13 +112,13 @@ static u8 omap3_beagle_version; */ static struct { int mmc1_gpio_wp; - int usb_pwr_level; + bool usb_pwr_level; /* 0 - Active Low, 1 - Active High */ int dvi_pd_gpio; int usr_button_gpio; int mmc_caps; } beagle_config = { .mmc1_gpio_wp = -EINVAL, - .usb_pwr_level = GPIOF_OUT_INIT_LOW, + .usb_pwr_level = 0, .dvi_pd_gpio = -EINVAL, .usr_button_gpio = 4, .mmc_caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, @@ -178,7 +178,7 @@ static void __init omap3_beagle_init_rev(void) case 0: printk(KERN_INFO "OMAP3 Beagle Rev: xM Ax/Bx\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_XM; - beagle_config.usb_pwr_level = GPIOF_OUT_INIT_HIGH; + beagle_config.usb_pwr_level = 1; beagle_config.mmc_caps &= ~MMC_CAP_8_BIT_DATA; break; case 2: -- 2.34.1