From d000d5e12938886ee7eb4f93f1dda9655ec0051a Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 30 Apr 2015 19:55:29 -0300 Subject: [PATCH] ARM: dts: imx6sl-warp: Remove USB regulators According to the warp schematics there are no regulators for the USB OTG ports, so let's remove them. Signed-off-by: Fabio Estevam Acked-by: Otavio Salvador Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6sl-warp.dts | 28 ---------------------------- 1 file changed, 28 deletions(-) diff --git a/arch/arm/boot/dts/imx6sl-warp.dts b/arch/arm/boot/dts/imx6sl-warp.dts index 232597a59122..cec189a16352 100644 --- a/arch/arm/boot/dts/imx6sl-warp.dts +++ b/arch/arm/boot/dts/imx6sl-warp.dts @@ -58,32 +58,6 @@ reg = <0x80000000 0x20000000>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_usb_otg1_vbus: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "usb_otg1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio4 0 0>; - enable-active-high; - }; - - reg_usb_otg2_vbus: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "usb_otg2_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio4 2 0>; - enable-active-high; - }; - }; - usdhc3_pwrseq: usdhc3_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>, /* WL_REG_ON */ @@ -113,14 +87,12 @@ }; &usbotg1 { - vbus-supply = <®_usb_otg1_vbus>; dr_mode = "host"; disable-over-current; status = "okay"; }; &usbotg2 { - vbus-supply = <®_usb_otg2_vbus>; disable-over-current; status = "okay"; }; -- 2.34.1