From d1cf1c7db3460972fa93eb6816d9cae71a10e8c7 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Wed, 23 Jan 2013 15:13:30 -0500 Subject: [PATCH] powerpc/85xx: split sbc8548 dts file into pre and post chunks Updates to u-boot allow this board to boot off of either the 8MB soldered on flash, or the 64MB SODIMM flash. This is achieved by changing JP12 and SW2.8 which in turn swaps which flash device appears on /CS0 and /CS6 respectively. Since the flash devices are not the same size, this also changes the MTD memory map layout on the local bus. Here we split the common chunks out into a pre and post include, so they can be reused by an upcoming "alternative boot" dts file; leaving only the local bus chunk behind. No content changes are made at this point - it is just purely the move to using include files. Signed-off-by: Paul Gortmaker Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/sbc8548-post.dtsi | 295 ++++++++++++++++++++++ arch/powerpc/boot/dts/sbc8548-pre.dtsi | 52 ++++ arch/powerpc/boot/dts/sbc8548.dts | 322 +----------------------- 3 files changed, 351 insertions(+), 318 deletions(-) create mode 100644 arch/powerpc/boot/dts/sbc8548-post.dtsi create mode 100644 arch/powerpc/boot/dts/sbc8548-pre.dtsi diff --git a/arch/powerpc/boot/dts/sbc8548-post.dtsi b/arch/powerpc/boot/dts/sbc8548-post.dtsi new file mode 100644 index 000000000000..33a47e27a11e --- /dev/null +++ b/arch/powerpc/boot/dts/sbc8548-post.dtsi @@ -0,0 +1,295 @@ +/* + * SBC8548 Device Tree Source + * + * Copyright 2007 Wind River Systems Inc. + * + * Paul Gortmaker (see MAINTAINERS for contact information) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/{ + soc8548@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x00000000 0xe0000000 0x00100000>; + bus-frequency = <0>; + compatible = "simple-bus"; + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <10>; + }; + + ecm@1000 { + compatible = "fsl,mpc8548-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8548-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <0x12 0x2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8548-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <0x20>; // 32 bytes + cache-size = <0x80000>; // L2, 512K + interrupt-parent = <&mpic>; + interrupts = <0x10 0x2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <0x2b 0x2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <0x2b 0x2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@19 { + interrupt-parent = <&mpic>; + interrupts = <0x6 0x1>; + reg = <0x19>; + device_type = "ethernet-phy"; + }; + phy1: ethernet-phy@1a { + interrupt-parent = <&mpic>; + interrupts = <0x7 0x1>; + reg = <0x1a>; + device_type = "ethernet-phy"; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <0x2a 0x2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <0x2a 0x2>; + interrupt-parent = <&mpic>; + }; + + global-utilities@e0000 { //global utilities reg + compatible = "fsl,mpc8548-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + + crypto@30000 { + compatible = "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0xfe>; + fsl,descriptor-types-mask = <0x12b0ebf>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + }; + + pci0: pci@e0008000 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x01 (PCI-X slot) @66MHz */ + 0x0800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x0800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x0800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x0800 0x0 0x0 0x4 &mpic 0x1 0x1 + + /* IDSEL 0x11 (PCI, 3.3V 32bit) @33MHz */ + 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1>; + + interrupt-parent = <&mpic>; + interrupts = <0x18 0x2>; + bus-range = <0 0>; + ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00800000>; + clock-frequency = <66000000>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008000 0x1000>; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; + }; + + pci1: pcie@e000a000 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x0 (PEX) */ + 0x0000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x0000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x0000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x0000 0x0 0x0 0x4 &mpic 0x3 0x1>; + + interrupt-parent = <&mpic>; + interrupts = <0x1a 0x2>; + bus-range = <0x0 0xff>; + ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe2800000 0x0 0x08000000>; + clock-frequency = <33000000>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe000a000 0x1000>; + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0x0 0xa0000000 + 0x02000000 0x0 0xa0000000 + 0x0 0x10000000 + + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x00800000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/sbc8548-pre.dtsi b/arch/powerpc/boot/dts/sbc8548-pre.dtsi new file mode 100644 index 000000000000..d8c66290c5b4 --- /dev/null +++ b/arch/powerpc/boot/dts/sbc8548-pre.dtsi @@ -0,0 +1,52 @@ +/* + * SBC8548 Device Tree Source + * + * Copyright 2007 Wind River Systems Inc. + * + * Paul Gortmaker (see MAINTAINERS for contact information) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/{ + model = "SBC8548"; + compatible = "SBC8548"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8548@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <0x20>; // 32 bytes + i-cache-line-size = <0x20>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; // From uboot + bus-frequency = <0>; + clock-frequency = <0>; + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + +}; diff --git a/arch/powerpc/boot/dts/sbc8548.dts b/arch/powerpc/boot/dts/sbc8548.dts index 77be77116c2e..ad8dc6808d2e 100644 --- a/arch/powerpc/boot/dts/sbc8548.dts +++ b/arch/powerpc/boot/dts/sbc8548.dts @@ -14,44 +14,9 @@ /dts-v1/; -/ { - model = "SBC8548"; - compatible = "SBC8548"; - #address-cells = <1>; - #size-cells = <1>; - - aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; - pci1 = &pci1; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8548@0 { - device_type = "cpu"; - reg = <0>; - d-cache-line-size = <0x20>; // 32 bytes - i-cache-line-size = <0x20>; // 32 bytes - d-cache-size = <0x8000>; // L1, 32K - i-cache-size = <0x8000>; // L1, 32K - timebase-frequency = <0>; // From uboot - bus-frequency = <0>; - clock-frequency = <0>; - next-level-cache = <&L2>; - }; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x10000000>; - }; +/include/ "sbc8548-pre.dtsi" +/{ localbus@e0000000 { #address-cells = <2>; #size-cells = <1>; @@ -144,285 +109,6 @@ }; }; }; - - soc8548@e0000000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - ranges = <0x00000000 0xe0000000 0x00100000>; - bus-frequency = <0>; - compatible = "simple-bus"; - - ecm-law@0 { - compatible = "fsl,ecm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <10>; - }; - - ecm@1000 { - compatible = "fsl,mpc8548-ecm", "fsl,ecm"; - reg = <0x1000 0x1000>; - interrupts = <17 2>; - interrupt-parent = <&mpic>; - }; - - memory-controller@2000 { - compatible = "fsl,mpc8548-memory-controller"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <0x12 0x2>; - }; - - L2: l2-cache-controller@20000 { - compatible = "fsl,mpc8548-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <0x20>; // 32 bytes - cache-size = <0x80000>; // L2, 512K - interrupt-parent = <&mpic>; - interrupts = <0x10 0x2>; - }; - - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <0x2b 0x2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <0x2b 0x2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8548-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,mpc8548-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,mpc8548-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,mpc8548-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - - enet0: ethernet@24000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - ranges = <0x0 0x24000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi0>; - phy-handle = <&phy0>; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x520 0x20>; - - phy0: ethernet-phy@19 { - interrupt-parent = <&mpic>; - interrupts = <0x6 0x1>; - reg = <0x19>; - device_type = "ethernet-phy"; - }; - phy1: ethernet-phy@1a { - interrupt-parent = <&mpic>; - interrupts = <0x7 0x1>; - reg = <0x1a>; - device_type = "ethernet-phy"; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - enet1: ethernet@25000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <1>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x25000 0x1000>; - ranges = <0x0 0x25000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi1>; - phy-handle = <&phy1>; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550"; - reg = <0x4500 0x100>; // reg base, size - clock-frequency = <0>; // should we fill in in uboot? - interrupts = <0x2a 0x2>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550"; - reg = <0x4600 0x100>; // reg base, size - clock-frequency = <0>; // should we fill in in uboot? - interrupts = <0x2a 0x2>; - interrupt-parent = <&mpic>; - }; - - global-utilities@e0000 { //global utilities reg - compatible = "fsl,mpc8548-guts"; - reg = <0xe0000 0x1000>; - fsl,has-rstcr; - }; - - crypto@30000 { - compatible = "fsl,sec2.1", "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <45 2>; - interrupt-parent = <&mpic>; - fsl,num-channels = <4>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0xfe>; - fsl,descriptor-types-mask = <0x12b0ebf>; - }; - - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - }; - }; - - pci0: pci@e0008000 { - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x01 (PCI-X slot) @66MHz */ - 0x0800 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x0800 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x0800 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x0800 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 (PCI, 3.3V 32bit) @33MHz */ - 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1>; - - interrupt-parent = <&mpic>; - interrupts = <0x18 0x2>; - bus-range = <0 0>; - ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x10000000 - 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00800000>; - clock-frequency = <66000000>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe0008000 0x1000>; - compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; - device_type = "pci"; - }; - - pci1: pcie@e000a000 { - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - - /* IDSEL 0x0 (PEX) */ - 0x0000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0x0000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0x0000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0x0000 0x0 0x0 0x4 &mpic 0x3 0x1>; - - interrupt-parent = <&mpic>; - interrupts = <0x1a 0x2>; - bus-range = <0x0 0xff>; - ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 - 0x01000000 0x0 0x00000000 0xe2800000 0x0 0x08000000>; - clock-frequency = <33000000>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe000a000 0x1000>; - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - ranges = <0x02000000 0x0 0xa0000000 - 0x02000000 0x0 0xa0000000 - 0x0 0x10000000 - - 0x01000000 0x0 0x00000000 - 0x01000000 0x0 0x00000000 - 0x0 0x00800000>; - }; - }; }; + +/include/ "sbc8548-post.dtsi" -- 2.34.1