From d2e08c0f34438af791482de8abf2c8e4e573b1d3 Mon Sep 17 00:00:00 2001 From: Shashank Sharma Date: Tue, 1 Sep 2015 19:41:40 +0530 Subject: [PATCH] drm/i915/bxt: DSI prepare changes for BXT This patch modifies dsi_prepare() function to support the same modeset prepare sequence for BXT also. Main changes are: 1. BXT port control register is different than VLV. 2. BXT modeset sequence needs vdisplay and hdisplay programmed for transcoder. 3. BXT can select PIPE for MIPI transcoders. 4. BXT needs to program register MIPI_INIT_COUNT for both the ports, even if only one is being used. v2: Fixed Jani's review comments. Rectified the DSI Macros to get proper register offsets using _MIPI_PORT instead of _TRANSCODER v3: Rebased on latest drm-nightly branch. Fixed Jani's review comments. Signed-off-by: Shashank Sharma Signed-off-by: Uma Shankar Reviewed-by: Jani Nikula Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_reg.h | 21 ++++++++++ drivers/gpu/drm/i915/intel_dsi.c | 69 +++++++++++++++++++++++++++----- 2 files changed, 80 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 4ef16aabc30a..c5287a1818f3 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -7507,6 +7507,22 @@ enum skl_disp_power_wells { #define _MIPI_PORT(port, a, c) _PORT3(port, a, 0, c) /* ports A and C only */ +/* BXT MIPI mode configure */ +#define _BXT_MIPIA_TRANS_HACTIVE 0x6B0F8 +#define _BXT_MIPIC_TRANS_HACTIVE 0x6B8F8 +#define BXT_MIPI_TRANS_HACTIVE(tc) _MIPI_PORT(tc, \ + _BXT_MIPIA_TRANS_HACTIVE, _BXT_MIPIC_TRANS_HACTIVE) + +#define _BXT_MIPIA_TRANS_VACTIVE 0x6B0FC +#define _BXT_MIPIC_TRANS_VACTIVE 0x6B8FC +#define BXT_MIPI_TRANS_VACTIVE(tc) _MIPI_PORT(tc, \ + _BXT_MIPIA_TRANS_VACTIVE, _BXT_MIPIC_TRANS_VACTIVE) + +#define _BXT_MIPIA_TRANS_VTOTAL 0x6B100 +#define _BXT_MIPIC_TRANS_VTOTAL 0x6B900 +#define BXT_MIPI_TRANS_VTOTAL(tc) _MIPI_PORT(tc, \ + _BXT_MIPIA_TRANS_VTOTAL, _BXT_MIPIC_TRANS_VTOTAL) + #define BXT_DSI_PLL_CTL 0x161000 #define BXT_DSI_PLL_PVD_RATIO_SHIFT 16 #define BXT_DSI_PLL_PVD_RATIO_MASK (3 << BXT_DSI_PLL_PVD_RATIO_SHIFT) @@ -7942,6 +7958,11 @@ enum skl_disp_power_wells { #define READ_REQUEST_PRIORITY_HIGH (3 << 3) #define RGB_FLIP_TO_BGR (1 << 2) +#define BXT_PIPE_SELECT_MASK (7 << 7) +#define BXT_PIPE_SELECT_C (2 << 7) +#define BXT_PIPE_SELECT_B (1 << 7) +#define BXT_PIPE_SELECT_A (0 << 7) + #define _MIPIA_DATA_ADDRESS (dev_priv->mipi_mmio_base + 0xb108) #define _MIPIC_DATA_ADDRESS (dev_priv->mipi_mmio_base + 0xb908) #define MIPI_DATA_ADDRESS(port) _MIPI_PORT(port, _MIPIA_DATA_ADDRESS, \ diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c index 50159a99d58a..5b69b4126282 100644 --- a/drivers/gpu/drm/i915/intel_dsi.c +++ b/drivers/gpu/drm/i915/intel_dsi.c @@ -737,6 +737,21 @@ static void set_dsi_timings(struct drm_encoder *encoder, hbp = txbyteclkhs(hbp, bpp, lane_count, intel_dsi->burst_mode_ratio); for_each_dsi_port(port, intel_dsi->ports) { + if (IS_BROXTON(dev)) { + /* + * Program hdisplay and vdisplay on MIPI transcoder. + * This is different from calculated hactive and + * vactive, as they are calculated per channel basis, + * whereas these values should be based on resolution. + */ + I915_WRITE(BXT_MIPI_TRANS_HACTIVE(port), + mode->hdisplay); + I915_WRITE(BXT_MIPI_TRANS_VACTIVE(port), + mode->vdisplay); + I915_WRITE(BXT_MIPI_TRANS_VTOTAL(port), + mode->vtotal); + } + I915_WRITE(MIPI_HACTIVE_AREA_COUNT(port), hactive); I915_WRITE(MIPI_HFP_COUNT(port), hfp); @@ -777,16 +792,39 @@ static void intel_dsi_prepare(struct intel_encoder *intel_encoder) } for_each_dsi_port(port, intel_dsi->ports) { - /* escape clock divider, 20MHz, shared for A and C. - * device ready must be off when doing this! txclkesc? */ - tmp = I915_READ(MIPI_CTRL(PORT_A)); - tmp &= ~ESCAPE_CLOCK_DIVIDER_MASK; - I915_WRITE(MIPI_CTRL(PORT_A), tmp | ESCAPE_CLOCK_DIVIDER_1); - - /* read request priority is per pipe */ - tmp = I915_READ(MIPI_CTRL(port)); - tmp &= ~READ_REQUEST_PRIORITY_MASK; - I915_WRITE(MIPI_CTRL(port), tmp | READ_REQUEST_PRIORITY_HIGH); + if (IS_VALLEYVIEW(dev)) { + /* + * escape clock divider, 20MHz, shared for A and C. + * device ready must be off when doing this! txclkesc? + */ + tmp = I915_READ(MIPI_CTRL(PORT_A)); + tmp &= ~ESCAPE_CLOCK_DIVIDER_MASK; + I915_WRITE(MIPI_CTRL(PORT_A), tmp | + ESCAPE_CLOCK_DIVIDER_1); + + /* read request priority is per pipe */ + tmp = I915_READ(MIPI_CTRL(port)); + tmp &= ~READ_REQUEST_PRIORITY_MASK; + I915_WRITE(MIPI_CTRL(port), tmp | + READ_REQUEST_PRIORITY_HIGH); + } else if (IS_BROXTON(dev)) { + /* + * FIXME: + * BXT can connect any PIPE to any MIPI port. + * Select the pipe based on the MIPI port read from + * VBT for now. Pick PIPE A for MIPI port A and C + * for port C. + */ + tmp = I915_READ(MIPI_CTRL(port)); + tmp &= ~BXT_PIPE_SELECT_MASK; + + if (port == PORT_A) + tmp |= BXT_PIPE_SELECT_A; + else if (port == PORT_C) + tmp |= BXT_PIPE_SELECT_C; + + I915_WRITE(MIPI_CTRL(port), tmp); + } /* XXX: why here, why like this? handling in irq handler?! */ I915_WRITE(MIPI_INTR_STAT(port), 0xffffffff); @@ -863,6 +901,17 @@ static void intel_dsi_prepare(struct intel_encoder *intel_encoder) I915_WRITE(MIPI_INIT_COUNT(port), txclkesc(intel_dsi->escape_clk_div, 100)); + if (IS_BROXTON(dev) && (!intel_dsi->dual_link)) { + /* + * BXT spec says write MIPI_INIT_COUNT for + * both the ports, even if only one is + * getting used. So write the other port + * if not in dual link mode. + */ + I915_WRITE(MIPI_INIT_COUNT(port == + PORT_A ? PORT_C : PORT_A), + intel_dsi->init_count); + } /* recovery disables */ I915_WRITE(MIPI_EOT_DISABLE(port), tmp); -- 2.34.1