From d2eac98f7d1b950b762a7eca05a9ce0ea1d878d2 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 20 Jul 2015 17:49:55 -0700 Subject: [PATCH] net: dsa: bcm_sf2: Do not override speed settings The SF2 driver currently overrides speed settings for its port configured using a fixed PHY, this is both unnecessary and incorrect, because we keep feedback to the hardware parameters that we read from the PHY device, which in the case of a fixed PHY cannot possibly change speed. This is a required change to allow the fixed PHY code to allow registering a PHY with a link configured as DOWN by default and avoid some sort of circular dependency where we require the link_update callback to run to program the hardware, and we then utilize the fixed PHY parameters to program the hardware with the same settings. Fixes: 246d7f773c13 ("net: dsa: add Broadcom SF2 switch driver") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/dsa/bcm_sf2.c | 18 +----------------- 1 file changed, 1 insertion(+), 17 deletions(-) diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c index 972982f8bea7..3297604f8216 100644 --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -890,15 +890,11 @@ static void bcm_sf2_sw_fixed_link_update(struct dsa_switch *ds, int port, struct fixed_phy_status *status) { struct bcm_sf2_priv *priv = ds_to_priv(ds); - u32 duplex, pause, speed; + u32 duplex, pause; u32 reg; duplex = core_readl(priv, CORE_DUPSTS); pause = core_readl(priv, CORE_PAUSESTS); - speed = core_readl(priv, CORE_SPDSTS); - - speed >>= (port * SPDSTS_SHIFT); - speed &= SPDSTS_MASK; status->link = 0; @@ -933,18 +929,6 @@ static void bcm_sf2_sw_fixed_link_update(struct dsa_switch *ds, int port, reg &= ~LINK_STS; core_writel(priv, reg, CORE_STS_OVERRIDE_GMIIP_PORT(port)); - switch (speed) { - case SPDSTS_10: - status->speed = SPEED_10; - break; - case SPDSTS_100: - status->speed = SPEED_100; - break; - case SPDSTS_1000: - status->speed = SPEED_1000; - break; - } - if ((pause & (1 << port)) && (pause & (1 << (port + PAUSESTS_TX_PAUSE_SHIFT)))) { status->asym_pause = 1; -- 2.34.1