From d5922e6ffc670e4f0f7b5f4996b3d82d88518927 Mon Sep 17 00:00:00 2001 From: =?utf8?q?T=C3=BClin=20=C4=B0zer?= Date: Sat, 11 May 2013 15:25:34 +0300 Subject: [PATCH] Staging: bcm: fixed warning 'space required after ',' ' MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit This patch fixes warning found by checkpatch.pl in driver bcm. Signed-off-by: Tülin İzer Signed-off-by: Greg Kroah-Hartman --- drivers/staging/bcm/InterfaceIdleMode.c | 78 ++++++++++++------------- 1 file changed, 39 insertions(+), 39 deletions(-) diff --git a/drivers/staging/bcm/InterfaceIdleMode.c b/drivers/staging/bcm/InterfaceIdleMode.c index a1bf21579d3f..33c9915b4ebe 100644 --- a/drivers/staging/bcm/InterfaceIdleMode.c +++ b/drivers/staging/bcm/InterfaceIdleMode.c @@ -48,29 +48,29 @@ int InterfaceIdleModeRespond(struct bcm_mini_adapter *Adapter, unsigned int* pui unsigned int uiRegRead = 0; int bytes; - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,"SubType of Message :0x%X", ntohl(*puiBuffer)); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "SubType of Message :0x%X", ntohl(*puiBuffer)); if(ntohl(*puiBuffer) == GO_TO_IDLE_MODE_PAYLOAD) { - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL," Got GO_TO_IDLE_MODE_PAYLOAD(210) Msg Subtype"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, " Got GO_TO_IDLE_MODE_PAYLOAD(210) Msg Subtype"); if(ntohl(*(puiBuffer+1)) == 0 ) { - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,"Got IDLE MODE WAKE UP Response From F/W"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Got IDLE MODE WAKE UP Response From F/W"); - status = wrmalt (Adapter,SW_ABORT_IDLEMODE_LOC, &uiRegRead, sizeof(uiRegRead)); + status = wrmalt (Adapter, SW_ABORT_IDLEMODE_LOC, &uiRegRead, sizeof(uiRegRead)); if(status) { - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "wrm failed while clearing Idle Mode Reg"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "wrm failed while clearing Idle Mode Reg"); return status; } if(Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) { uiRegRead = 0x00000000 ; - status = wrmalt (Adapter,DEBUG_INTERRUPT_GENERATOR_REGISTOR, &uiRegRead, sizeof(uiRegRead)); + status = wrmalt (Adapter, DEBUG_INTERRUPT_GENERATOR_REGISTOR, &uiRegRead, sizeof(uiRegRead)); if(status) { - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "wrm failed while clearing Idle Mode Reg"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "wrm failed while clearing Idle Mode Reg"); return status; } } @@ -81,18 +81,18 @@ int InterfaceIdleModeRespond(struct bcm_mini_adapter *Adapter, unsigned int* pui bytes = rdmalt(Adapter, DEVICE_INT_OUT_EP_REG0, &uiRegRead, sizeof(uiRegRead)); if (bytes < 0) { status = bytes; - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "rdm failed while clearing H/W Abort Reg0"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "rdm failed while clearing H/W Abort Reg0"); return status; } //clear on read Register bytes = rdmalt(Adapter, DEVICE_INT_OUT_EP_REG1, &uiRegRead, sizeof(uiRegRead)); if (bytes < 0) { status = bytes; - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "rdm failed while clearing H/W Abort Reg1"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "rdm failed while clearing H/W Abort Reg1"); return status; } } - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Device Up from Idle Mode"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Device Up from Idle Mode"); // Set Idle Mode Flag to False and Clear IdleMode reg. Adapter->IdleMode = FALSE; @@ -105,12 +105,12 @@ int InterfaceIdleModeRespond(struct bcm_mini_adapter *Adapter, unsigned int* pui { if(TRUE == Adapter->IdleMode) { - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,"Device is already in Idle mode...."); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Device is already in Idle mode...."); return status ; } uiRegRead = 0; - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Got Req from F/W to go in IDLE mode \n"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Got Req from F/W to go in IDLE mode \n"); if (Adapter->chip_id== BCS220_2 || Adapter->chip_id == BCS220_2BC || @@ -121,17 +121,17 @@ int InterfaceIdleModeRespond(struct bcm_mini_adapter *Adapter, unsigned int* pui bytes = rdmalt(Adapter, HPM_CONFIG_MSW, &uiRegRead, sizeof(uiRegRead)); if (bytes < 0) { status = bytes; - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "rdm failed while Reading HPM_CONFIG_LDO145 Reg 0\n"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "rdm failed while Reading HPM_CONFIG_LDO145 Reg 0\n"); return status; } uiRegRead |= (1<<17); - status = wrmalt (Adapter,HPM_CONFIG_MSW, &uiRegRead, sizeof(uiRegRead)); + status = wrmalt (Adapter, HPM_CONFIG_MSW, &uiRegRead, sizeof(uiRegRead)); if(status) { - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "wrm failed while clearing Idle Mode Reg\n"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "wrm failed while clearing Idle Mode Reg\n"); return status; } @@ -141,8 +141,8 @@ int InterfaceIdleModeRespond(struct bcm_mini_adapter *Adapter, unsigned int* pui } else if(ntohl(*puiBuffer) == IDLE_MODE_SF_UPDATE_MSG) { - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "OverRiding Service Flow Params"); - OverrideServiceFlowParams(Adapter,puiBuffer); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "OverRiding Service Flow Params"); + OverrideServiceFlowParams(Adapter, puiBuffer); } return status; } @@ -152,17 +152,17 @@ static int InterfaceAbortIdlemode(struct bcm_mini_adapter *Adapter, unsigned int int status = STATUS_SUCCESS; unsigned int value; unsigned int chip_id ; - unsigned long timeout = 0 ,itr = 0; + unsigned long timeout = 0, itr = 0; int lenwritten = 0; - unsigned char aucAbortPattern[8]={0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF}; + unsigned char aucAbortPattern[8]={0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}; struct bcm_interface_adapter *psInterfaceAdapter = Adapter->pvInterfaceAdapter; //Abort Bus suspend if its already suspended if((TRUE == psInterfaceAdapter->bSuspended) && (TRUE == Adapter->bDoSuspend)) { status = usb_autopm_get_interface(psInterfaceAdapter->interface); - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,"Bus got wakeup..Aborting Idle mode... status:%d \n",status); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Bus got wakeup..Aborting Idle mode... status:%d \n", status); } @@ -171,11 +171,11 @@ static int InterfaceAbortIdlemode(struct bcm_mini_adapter *Adapter, unsigned int (Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE)) { //write the SW abort pattern. - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Writing pattern<%d> to SW_ABORT_IDLEMODE_LOC\n", Pattern); - status = wrmalt(Adapter,SW_ABORT_IDLEMODE_LOC, &Pattern, sizeof(Pattern)); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Writing pattern<%d> to SW_ABORT_IDLEMODE_LOC\n", Pattern); + status = wrmalt(Adapter, SW_ABORT_IDLEMODE_LOC, &Pattern, sizeof(Pattern)); if(status) { - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,"WRM to Register SW_ABORT_IDLEMODE_LOC failed.."); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "WRM to Register SW_ABORT_IDLEMODE_LOC failed.."); return status; } } @@ -183,10 +183,10 @@ static int InterfaceAbortIdlemode(struct bcm_mini_adapter *Adapter, unsigned int if(Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) { value = 0x80000000; - status = wrmalt(Adapter,DEBUG_INTERRUPT_GENERATOR_REGISTOR, &value, sizeof(value)); + status = wrmalt(Adapter, DEBUG_INTERRUPT_GENERATOR_REGISTOR, &value, sizeof(value)); if(status) { - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,"WRM to DEBUG_INTERRUPT_GENERATOR_REGISTOR Register failed"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "WRM to DEBUG_INTERRUPT_GENERATOR_REGISTOR Register failed"); return status; } } @@ -206,12 +206,12 @@ static int InterfaceAbortIdlemode(struct bcm_mini_adapter *Adapter, unsigned int 5000); if(status) { - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Sending Abort pattern down fails with status:%d..\n",status); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Sending Abort pattern down fails with status:%d..\n", status); return status; } else { - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "NOB Sent down :%d", lenwritten); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "NOB Sent down :%d", lenwritten); } //mdelay(25); @@ -230,17 +230,17 @@ static int InterfaceAbortIdlemode(struct bcm_mini_adapter *Adapter, unsigned int } if(timeout < jiffies ) { - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,"Not able to read chip-id even after 25 msec"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Not able to read chip-id even after 25 msec"); } else { - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,"Number of completed iteration to read chip-id :%lu", itr); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Number of completed iteration to read chip-id :%lu", itr); } - status = wrmalt(Adapter,SW_ABORT_IDLEMODE_LOC, &Pattern, sizeof(status)); + status = wrmalt(Adapter, SW_ABORT_IDLEMODE_LOC, &Pattern, sizeof(status)); if(status) { - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"WRM to Register SW_ABORT_IDLEMODE_LOC failed.."); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "WRM to Register SW_ABORT_IDLEMODE_LOC failed.."); return status; } } @@ -251,11 +251,11 @@ int InterfaceIdleModeWakeup(struct bcm_mini_adapter *Adapter) ULONG Status = 0; if(Adapter->bTriedToWakeUpFromlowPowerMode) { - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Wake up already attempted.. ignoring\n"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Wake up already attempted.. ignoring\n"); } else { - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,"Writing Low Power Mode Abort pattern to the Device\n"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Writing Low Power Mode Abort pattern to the Device\n"); Adapter->bTriedToWakeUpFromlowPowerMode = TRUE; InterfaceAbortIdlemode(Adapter, Adapter->usIdleModePattern); @@ -273,10 +273,10 @@ void InterfaceHandleShutdownModeWakeup(struct bcm_mini_adapter *Adapter) { // clear idlemode interrupt. uiRegVal = 0; - Status =wrmalt(Adapter,DEBUG_INTERRUPT_GENERATOR_REGISTOR, &uiRegVal, sizeof(uiRegVal)); + Status =wrmalt(Adapter, DEBUG_INTERRUPT_GENERATOR_REGISTOR, &uiRegVal, sizeof(uiRegVal)); if(Status) { - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"WRM to DEBUG_INTERRUPT_GENERATOR_REGISTOR Failed with err :%d", Status); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,"WRM to DEBUG_INTERRUPT_GENERATOR_REGISTOR Failed with err :%d", Status); return; } } @@ -285,17 +285,17 @@ void InterfaceHandleShutdownModeWakeup(struct bcm_mini_adapter *Adapter) { //clear Interrupt EP registers. - bytes = rdmalt(Adapter,DEVICE_INT_OUT_EP_REG0, &uiRegVal, sizeof(uiRegVal)); + bytes = rdmalt(Adapter, DEVICE_INT_OUT_EP_REG0, &uiRegVal, sizeof(uiRegVal)); if (bytes < 0) { Status = bytes; - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"RDM of DEVICE_INT_OUT_EP_REG0 failed with Err :%d", Status); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "RDM of DEVICE_INT_OUT_EP_REG0 failed with Err :%d", Status); return; } - bytes = rdmalt(Adapter,DEVICE_INT_OUT_EP_REG1, &uiRegVal, sizeof(uiRegVal)); + bytes = rdmalt(Adapter, DEVICE_INT_OUT_EP_REG1, &uiRegVal, sizeof(uiRegVal)); if (bytes < 0) { Status = bytes; - BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"RDM of DEVICE_INT_OUT_EP_REG1 failed with Err :%d", Status); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "RDM of DEVICE_INT_OUT_EP_REG1 failed with Err :%d", Status); return; } } -- 2.34.1