From dbdce13da73bd16b9b1d44e990c8d81138e4561f Mon Sep 17 00:00:00 2001 From: "Huang, Tao" Date: Tue, 7 Feb 2017 11:11:47 +0800 Subject: [PATCH] dt-bindings: suspend: remove unused rockchip-pm.h Which is legacy code, do not need any more. Change-Id: I15f5cbf1389a6442fca6fbf348d2d94a59510338 Signed-off-by: Huang, Tao --- include/dt-bindings/suspend/rockchip-pm.h | 158 ---------------------- 1 file changed, 158 deletions(-) delete mode 100755 include/dt-bindings/suspend/rockchip-pm.h diff --git a/include/dt-bindings/suspend/rockchip-pm.h b/include/dt-bindings/suspend/rockchip-pm.h deleted file mode 100755 index 89a41feee4bf..000000000000 --- a/include/dt-bindings/suspend/rockchip-pm.h +++ /dev/null @@ -1,158 +0,0 @@ -/* - * Header providing constants for Rockchip pinctrl bindings. - * - * Copyright (c) 2013 MundoReader S.L. - * Author: Heiko Stuebner - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __DT_BINDINGS_ROCKCHIP_PM_H__ -#define __DT_BINDINGS_ROCKCHIP_PM_H__ -/******************************bits ops************************************/ - -#ifndef BIT -#define BIT(nr) (1 << (nr)) -#endif - -#define RKPM_BITS_W_MSK(bits_shift, msk) ((msk) << ((bits_shift) + 16)) - -#define RKPM_BITS_CLR_VAL(val, bits_shift, msk) (val&~(msk<> (bits_shift))&(msk)) - -/*********************CTRBIT DEFINE*****************************/ -#define RKPM_CTR_PWR_DMNS BIT(0) -#define RKPM_CTR_GTCLKS BIT(1) -#define RKPM_CTR_PLLS BIT(2) -#define RKPM_CTR_VOLTS BIT(3) -#define RKPM_CTR_GPIOS BIT(4) -#define RKPM_CTR_DDR BIT(5) -#define RKPM_CTR_PMIC BIT(6) -#define RKPM_CTR_VOL_PWM0 BIT(10) -#define RKPM_CTR_VOL_PWM1 BIT(11) -#define RKPM_CTR_VOL_PWM2 BIT(12) -#define RKPM_CTR_VOL_PWM3 BIT(13) -#define RKPM_CTR_BUS_IDLE BIT(14) -/************************************************************* -*sys_clk 24M div , it is mutex for -**RKPM_CTR_SYSCLK_DIV and RKPM_CTR_SYSCLK_32K and RKPM_CTR_SYSCLK_OSC_DIS. -**you can select only one -************************************************************/ -#define RKPM_CTR_SYSCLK_DIV BIT(7)// system clk is 24M,and div to min -#define RKPM_CTR_SYSCLK_32K BIT(8)// switch sysclk to 32k,need hardwart susport. and div to min -#define RKPM_CTR_SYSCLK_OSC_DIS BIT(9) // switch sysclk to 32k,disable 24M OSC,need hardwart susport. and div to min - -//Low Power Function Selection -#define RKPM_CTR_IDLESRAM_MD BIT(16) // ddr reslf by soft // nor low power -#define RKPM_CTR_IDLEAUTO_MD BIT(17) // ddr reslf by soc // nor low power -#define RKPM_CTR_ARMDP_LPMD BIT(18) // arm enter deep sleep,not off power supply -#define RKPM_CTR_ARMOFF_LPMD BIT(19) // arm enter deep sleep,off power supply -#define RKPM_CTR_ARMLOGDP_LPMD BIT(20)// arm and logic enter deep sleep,both is not off power supply -#define RKPM_CTR_ARMOFF_LOGDP_LPMD BIT(21)// arm off ,logic enter deep sleep,but it is not off power supply -#define RKPM_CTR_ARMLOGOFF_DLPMD BIT(22) //// arm and logic enter deep sleep,both is off power supply - - //debug ctrl Selection -#define RKPM_CTR_RET_DIRT BIT(24) -#define RKPM_CTR_SRAM_NO_WFI BIT(26) -#define RKPM_CTR_WAKE_UP_KEY BIT(27) -#define RKPM_CTR_ALL BIT(31) - -/*********************CTRBIT DEFINE END*****************************/ - - -//RKPM_IDX_TO_BITS -#define RKPM_OR_2BITS(bit1,bit2) ((RKPM_CTR_##bit1)|(RKPM_CTR_##bit2)) -#define RKPM_OR_3BITS(bit1,bit2,bit3) ((RKPM_CTR_##bit1)|RKPM_OR_2BITS(bit2,bit3)) -#define RKPM_OR_4BITS(bit1,bit2,bit3,bit4) ((RKPM_CTR_##bit1)|RKPM_OR_3BITS(bit2,bit3,bit4)) -#define RKPM_OR_5BITS(bit1,bit2,bit3,bit4,bit5) ((RKPM_CTR_##bit1)|RKPM_OR_4BITS(bit2,bit3,bit4,bit5)) - -/*********************CTRBIT DEFINE END*****************************/ - -//pin=0x0a21 gpio0a2,port=0,bank=a,b_gpio=2,fun=1 -#define RKPM_PINBITS_BGPIO(pins) RKPM_GETBITS(pins,4,0xf) -#define RKPM_PINBITS_BANK(pins) RKPM_GETBITS(pins,8,0xf) // a,b,c,d -#define RKPM_PINBITS_PORT(pins) RKPM_GETBITS(pins,0xc,0xf) -#define RKPM_PINBITS_FUN(pins) RKPM_GETBITS(pins,0,0xf) - -//#define RKPM_PINBITS(port,bank,bgpio,fun) 0 - -#if 1 -#define RKPM_PINBITS(port,bank,bgpio,fun) (0\ - |RKPM_SETBITS(fun,0,0xf)\ - |RKPM_SETBITS(bgpio,0x4,0xf)\ - |RKPM_SETBITS(bank,0x8,0xf)\ - |RKPM_SETBITS(port,0xc,0xf)\ - ) -#endif -#define RKPM_PINBITS_SET_FUN(pins,fun) RKPM_VAL_SETBITS(pins,fun,0,0xf) - -#define RKPM_PINGPIO_PIN (0) -#define RKPM_PINGPIO_PIN_MSK (0xffff) - -#define RKPM_PINGPIO_PULL (24) -#define RKPM_PINGPIO_PULL_MSK (0x3) - -#define RKPM_PINGPIO_INOUT (26) -#define RKPM_PINGPIO_INOUT_MSK (0x3) - -#define RKPM_PINGPIO_LEVEL (28) -#define RKPM_PINGPIO_LEVEL_MSK (0x3) - -#define RKPM_GPIO_INPUT (0) -#define RKPM_GPIO_OUTPUT (1) - -#define RKPM_GPIO_OUT_L (0) -#define RKPM_GPIO_OUT_H (1) - -#define RKPM_GPIO_PULL_Z (0) -#define RKPM_GPIO_PULL_UP (0x1) -#define RKPM_GPIO_PULL_DN (0x2) -#define RKPM_GPIO_PULL_RPTR (0x3) - -#define RKPM_PINGPIO_BITS(pin,pull,inout,_level) (0\ - |RKPM_SETBITS(pin,RKPM_PINGPIO_PIN,RKPM_PINGPIO_PIN_MSK)\ - |RKPM_SETBITS(inout,RKPM_PINGPIO_INOUT,RKPM_PINGPIO_INOUT_MSK)\ - |RKPM_SETBITS(pull,RKPM_PINGPIO_PULL,RKPM_PINGPIO_PULL_MSK)\ - |RKPM_SETBITS(_level,RKPM_PINGPIO_LEVEL,RKPM_PINGPIO_LEVEL_MSK)\ - ) - -#define RKPM_PINGPIO_BITS_OUTPUT(pin,_level) (0\ - |RKPM_SETBITS(pin,RKPM_PINGPIO_PIN,RKPM_PINGPIO_PIN_MSK)\ - |RKPM_SETBITS(RKPM_GPIO_OUTPUT,RKPM_PINGPIO_INOUT,RKPM_PINGPIO_INOUT_MSK)\ - |RKPM_SETBITS(_level,RKPM_PINGPIO_LEVEL,RKPM_PINGPIO_LEVEL_MSK)\ - ) - -#define RKPM_PINGPIO_BITS_INTPUT(pin,pull) (0\ - |RKPM_SETBITS(pin,RKPM_PINGPIO_PIN,RKPM_PINGPIO_PIN_MSK)\ - |RKPM_SETBITS(RKPM_GPIO_INPUT,RKPM_PINGPIO_INOUT,RKPM_PINGPIO_INOUT_MSK)\ - |RKPM_SETBITS(pull,RKPM_PINGPIO_PULL,RKPM_PINGPIO_PULL_MSK)\ - ) - #define RKPM_PINGPIO_BITS_FUN(pin,pull) (0\ - |RKPM_SETBITS(pin,RKPM_PINGPIO_PIN,RKPM_PINGPIO_PIN_MSK)\ - |RKPM_SETBITS(pull,RKPM_PINGPIO_PULL,RKPM_PINGPIO_PULL_MSK)\ - ) - -#define RKPM_PINGPIO_BITS_PIN(bits) RKPM_GETBITS(bits,RKPM_PINGPIO_PIN,RKPM_PINGPIO_PIN_MSK) -#define RKPM_PINGPIO_BITS_LEVEL(bits) RKPM_GETBITS(bits,RKPM_PINGPIO_LEVEL,RKPM_PINGPIO_INOUT_MSK) -#define RKPM_PINGPIO_BITS_PULL(bits) RKPM_GETBITS(bits,RKPM_PINGPIO_PULL,RKPM_PINGPIO_PULL_MSK) -#define RKPM_PINGPIO_BITS_INOUT(bits) RKPM_GETBITS(bits,RKPM_PINGPIO_INOUT,RKPM_PINGPIO_LEVEL_MSK) - - -#endif -- 2.34.1