From dd0cdd888251d0d62df417d6859e74e57146c13f Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 5 Jul 2010 16:31:30 +0300 Subject: [PATCH] omap: Move omap1 USB platform init code into mach-omap1/usb.c Move omap1 FS USB platform init code into mach-omap1/usb.c Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/Makefile | 3 + arch/arm/mach-omap1/board-ams-delta.c | 2 +- arch/arm/mach-omap1/board-generic.c | 4 +- arch/arm/mach-omap1/board-h2.c | 2 +- arch/arm/mach-omap1/board-h3.c | 2 +- arch/arm/mach-omap1/board-htcherald.c | 2 +- arch/arm/mach-omap1/board-innovator.c | 4 +- arch/arm/mach-omap1/board-nokia770.c | 2 +- arch/arm/mach-omap1/board-osk.c | 2 +- arch/arm/mach-omap1/board-palmte.c | 2 +- arch/arm/mach-omap1/board-palmtt.c | 2 +- arch/arm/mach-omap1/board-palmz71.c | 2 +- arch/arm/mach-omap1/board-sx1.c | 2 +- arch/arm/mach-omap1/board-voiceblue.c | 2 +- arch/arm/mach-omap1/usb.c | 530 +++++++++++++++++++++++++ arch/arm/plat-omap/include/plat/usb.h | 42 +- arch/arm/plat-omap/usb.c | 535 -------------------------- 17 files changed, 589 insertions(+), 551 deletions(-) create mode 100644 arch/arm/mach-omap1/usb.c diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index ea231c7a550a..facfaeb1ae5c 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -23,6 +23,9 @@ obj-y += $(i2c-omap-m) $(i2c-omap-y) led-y := leds.o +usb-fs-$(CONFIG_USB) := usb.o +obj-y += $(usb-fs-m) $(usb-fs-y) + # Specific board support obj-$(CONFIG_MACH_OMAP_H2) += board-h2.o board-h2-mmc.o obj-$(CONFIG_MACH_OMAP_INNOVATOR) += board-innovator.o diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index fdd1dd53fa9c..c6a81ff8c0d8 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -235,7 +235,7 @@ static void __init ams_delta_init(void) /* Clear latch2 (NAND, LCD, modem enable) */ ams_delta_latch2_write(~0, 0); - omap_usb_init(&ams_delta_usb_config); + omap1_usb_init(&ams_delta_usb_config); platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices)); #ifdef CONFIG_AMS_DELTA_FIQ diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index e1195a3467b8..e9ed8bff1ce3 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -72,12 +72,12 @@ static void __init omap_generic_init(void) omap_cfg_reg(UART3_TX); omap_cfg_reg(UART3_RX); - omap_usb_init(&generic1510_usb_config); + omap1_usb_init(&generic1510_usb_config); } #endif #if defined(CONFIG_ARCH_OMAP16XX) if (!cpu_is_omap1510()) { - omap_usb_init(&generic1610_usb_config); + omap1_usb_init(&generic1610_usb_config); } #endif diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index d1100e4f65ac..5f30188ade99 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -452,7 +452,7 @@ static void __init h2_init(void) omap_serial_init(); omap_register_i2c_bus(1, 100, h2_i2c_board_info, ARRAY_SIZE(h2_i2c_board_info)); - omap_usb_init(&h2_usb_config); + omap1_usb_init(&h2_usb_config); h2_mmc_init(); } diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index a53ab8297d25..0be1d3b8181d 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -405,7 +405,7 @@ static void __init h3_init(void) omap_serial_init(); omap_register_i2c_bus(1, 100, h3_i2c_board_info, ARRAY_SIZE(h3_i2c_board_info)); - omap_usb_init(&h3_usb_config); + omap1_usb_init(&h3_usb_config); h3_mmc_init(); } diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index 8e313b4b99a9..736e4c2064f6 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -287,7 +287,7 @@ static void __init htcherald_init(void) htcherald_disable_watchdog(); htcherald_usb_enable(); - omap_usb_init(&htcherald_usb_config); + omap1_usb_init(&htcherald_usb_config); } static void __init htcherald_init_irq(void) diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 5d12fd35681b..3c04e90fb85a 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -422,13 +422,13 @@ static void __init innovator_init(void) #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { - omap_usb_init(&innovator1510_usb_config); + omap1_usb_init(&innovator1510_usb_config); innovator_config[1].data = &innovator1510_lcd_config; } #endif #ifdef CONFIG_ARCH_OMAP16XX if (cpu_is_omap1610()) { - omap_usb_init(&h2_usb_config); + omap1_usb_init(&h2_usb_config); innovator_config[1].data = &innovator1610_lcd_config; } #endif diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 71e1a3fad0ea..c9e9e37c5676 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -386,7 +386,7 @@ static void __init omap_nokia770_init(void) hwa742_dev_init(); ads7846_dev_init(); mipid_dev_init(); - omap_usb_init(&nokia770_usb_config); + omap1_usb_init(&nokia770_usb_config); nokia770_mmc_init(); } diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 80d862001def..b28c46a9ecce 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -560,7 +560,7 @@ static void __init osk_init(void) l |= (3 << 1); omap_writel(l, USB_TRANSCEIVER_CTRL); - omap_usb_init(&osk_usb_config); + omap1_usb_init(&osk_usb_config); /* irq for tps65010 chip */ /* bootloader effectively does: omap_cfg_reg(U19_1610_MPUIO1); */ diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 569b4c9085cd..51d5c4dc7967 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -359,7 +359,7 @@ static void __init omap_palmte_init(void) spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info)); palmte_misc_gpio_setup(); omap_serial_init(); - omap_usb_init(&palmte_usb_config); + omap1_usb_init(&palmte_usb_config); omap_register_i2c_bus(1, 100, NULL, 0); } diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index 6ad49a2cc1a0..c0bcfc6119db 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -307,7 +307,7 @@ static void __init omap_palmtt_init(void) spi_register_board_info(palmtt_boardinfo,ARRAY_SIZE(palmtt_boardinfo)); omap_serial_init(); - omap_usb_init(&palmtt_usb_config); + omap1_usb_init(&palmtt_usb_config); omap_register_i2c_bus(1, 100, NULL, 0); } diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index 6641de9257ef..f431b44a71e3 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -325,7 +325,7 @@ omap_palmz71_init(void) spi_register_board_info(palmz71_boardinfo, ARRAY_SIZE(palmz71_boardinfo)); - omap_usb_init(&palmz71_usb_config); + omap1_usb_init(&palmz71_usb_config); omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); palmz71_gpio_setup(0); diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 2fb1e5f8e2ec..7b21190a914a 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -392,7 +392,7 @@ static void __init omap_sx1_init(void) omap_board_config_size = ARRAY_SIZE(sx1_config); omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); - omap_usb_init(&sx1_usb_config); + omap1_usb_init(&sx1_usb_config); sx1_mmc_init(); /* turn on USB power */ diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 87b9436fe7c0..78107543d59b 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -198,7 +198,7 @@ static void __init voiceblue_init(void) omap_board_config = voiceblue_config; omap_board_config_size = ARRAY_SIZE(voiceblue_config); omap_serial_init(); - omap_usb_init(&voiceblue_usb_config); + omap1_usb_init(&voiceblue_usb_config); omap_register_i2c_bus(1, 100, NULL, 0); /* There is a good chance board is going up, so enable power LED diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c new file mode 100644 index 000000000000..19de03b074e3 --- /dev/null +++ b/arch/arm/mach-omap1/usb.c @@ -0,0 +1,530 @@ +/* + * Platform level USB initialization for FS USB OTG controller on omap1 and 24xx + * + * Copyright (C) 2004 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include + +#include + +#include +#include + +/* These routines should handle the standard chip-specific modes + * for usb0/1/2 ports, covering basic mux and transceiver setup. + * + * Some board-*.c files will need to set up additional mux options, + * like for suspend handling, vbus sensing, GPIOs, and the D+ pullup. + */ + +/* TESTED ON: + * - 1611B H2 (with usb1 mini-AB) using standard Mini-B or OTG cables + * - 5912 OSK OHCI (with usb0 standard-A), standard A-to-B cables + * - 5912 OSK UDC, with *nonstandard* A-to-A cable + * - 1510 Innovator UDC with bundled usb0 cable + * - 1510 Innovator OHCI with bundled usb1/usb2 cable + * - 1510 Innovator OHCI with custom usb0 cable, feeding 5V VBUS + * - 1710 custom development board using alternate pin group + * - 1710 H3 (with usb1 mini-AB) using standard Mini-B or OTG cables + */ + +#define INT_USB_IRQ_GEN IH2_BASE + 20 +#define INT_USB_IRQ_NISO IH2_BASE + 30 +#define INT_USB_IRQ_ISO IH2_BASE + 29 +#define INT_USB_IRQ_HGEN INT_USB_HHC_1 +#define INT_USB_IRQ_OTG IH2_BASE + 8 + +#ifdef CONFIG_USB_GADGET_OMAP + +static struct resource udc_resources[] = { + /* order is significant! */ + { /* registers */ + .start = UDC_BASE, + .end = UDC_BASE + 0xff, + .flags = IORESOURCE_MEM, + }, { /* general IRQ */ + .start = INT_USB_IRQ_GEN, + .flags = IORESOURCE_IRQ, + }, { /* PIO IRQ */ + .start = INT_USB_IRQ_NISO, + .flags = IORESOURCE_IRQ, + }, { /* SOF IRQ */ + .start = INT_USB_IRQ_ISO, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 udc_dmamask = ~(u32)0; + +static struct platform_device udc_device = { + .name = "omap_udc", + .id = -1, + .dev = { + .dma_mask = &udc_dmamask, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(udc_resources), + .resource = udc_resources, +}; + +static inline void udc_device_init(struct omap_usb_config *pdata) +{ + /* IRQ numbers for omap7xx */ + if(cpu_is_omap7xx()) { + udc_resources[1].start = INT_7XX_USB_GENI; + udc_resources[2].start = INT_7XX_USB_NON_ISO; + udc_resources[3].start = INT_7XX_USB_ISO; + } + pdata->udc_device = &udc_device; +} + +#else + +static inline void udc_device_init(struct omap_usb_config *pdata) +{ +} + +#endif + +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) + +/* The dmamask must be set for OHCI to work */ +static u64 ohci_dmamask = ~(u32)0; + +static struct resource ohci_resources[] = { + { + .start = OMAP_OHCI_BASE, + .end = OMAP_OHCI_BASE + 0xff, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_USB_IRQ_HGEN, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device ohci_device = { + .name = "ohci", + .id = -1, + .dev = { + .dma_mask = &ohci_dmamask, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(ohci_resources), + .resource = ohci_resources, +}; + +static inline void ohci_device_init(struct omap_usb_config *pdata) +{ + if (cpu_is_omap7xx()) + ohci_resources[1].start = INT_7XX_USB_HHC_1; + pdata->ohci_device = &ohci_device; +} + +#else + +static inline void ohci_device_init(struct omap_usb_config *pdata) +{ +} + +#endif + +#if defined(CONFIG_USB_OTG) && defined(CONFIG_ARCH_OMAP_OTG) + +static struct resource otg_resources[] = { + /* order is significant! */ + { + .start = OTG_BASE, + .end = OTG_BASE + 0xff, + .flags = IORESOURCE_MEM, + }, { + .start = INT_USB_IRQ_OTG, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device otg_device = { + .name = "omap_otg", + .id = -1, + .num_resources = ARRAY_SIZE(otg_resources), + .resource = otg_resources, +}; + +static inline void otg_device_init(struct omap_usb_config *pdata) +{ + if (cpu_is_omap7xx()) + otg_resources[1].start = INT_7XX_USB_OTG; + pdata->otg_device = &otg_device; +} + +#else + +static inline void otg_device_init(struct omap_usb_config *pdata) +{ +} + +#endif + +u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device) +{ + u32 syscon1 = 0; + + if (nwires == 0) { + if (!cpu_is_omap15xx()) { + u32 l; + + /* pulldown D+/D- */ + l = omap_readl(USB_TRANSCEIVER_CTRL); + l &= ~(3 << 1); + omap_writel(l, USB_TRANSCEIVER_CTRL); + } + return 0; + } + + if (is_device) { + if (cpu_is_omap7xx()) { + omap_cfg_reg(AA17_7XX_USB_DM); + omap_cfg_reg(W16_7XX_USB_PU_EN); + omap_cfg_reg(W17_7XX_USB_VBUSI); + omap_cfg_reg(W18_7XX_USB_DMCK_OUT); + omap_cfg_reg(W19_7XX_USB_DCRST); + } else + omap_cfg_reg(W4_USB_PUEN); + } + + if (nwires == 2) { + u32 l; + + // omap_cfg_reg(P9_USB_DP); + // omap_cfg_reg(R8_USB_DM); + + if (cpu_is_omap15xx()) { + /* This works on 1510-Innovator */ + return 0; + } + + /* NOTES: + * - peripheral should configure VBUS detection! + * - only peripherals may use the internal D+/D- pulldowns + * - OTG support on this port not yet written + */ + + /* Don't do this for omap7xx -- it causes USB to not work correctly */ + if (!cpu_is_omap7xx()) { + l = omap_readl(USB_TRANSCEIVER_CTRL); + l &= ~(7 << 4); + if (!is_device) + l |= (3 << 1); + omap_writel(l, USB_TRANSCEIVER_CTRL); + } + + return 3 << 16; + } + + /* alternate pin config, external transceiver */ + if (cpu_is_omap15xx()) { + printk(KERN_ERR "no usb0 alt pin config on 15xx\n"); + return 0; + } + + omap_cfg_reg(V6_USB0_TXD); + omap_cfg_reg(W9_USB0_TXEN); + omap_cfg_reg(W5_USB0_SE0); + if (nwires != 3) + omap_cfg_reg(Y5_USB0_RCV); + + /* NOTE: SPEED and SUSP aren't configured here. OTG hosts + * may be able to use I2C requests to set those bits along + * with VBUS switching and overcurrent detection. + */ + + if (nwires != 6) { + u32 l; + + l = omap_readl(USB_TRANSCEIVER_CTRL); + l &= ~CONF_USB2_UNI_R; + omap_writel(l, USB_TRANSCEIVER_CTRL); + } + + switch (nwires) { + case 3: + syscon1 = 2; + break; + case 4: + syscon1 = 1; + break; + case 6: + syscon1 = 3; + { + u32 l; + + omap_cfg_reg(AA9_USB0_VP); + omap_cfg_reg(R9_USB0_VM); + l = omap_readl(USB_TRANSCEIVER_CTRL); + l |= CONF_USB2_UNI_R; + omap_writel(l, USB_TRANSCEIVER_CTRL); + } + break; + default: + printk(KERN_ERR "illegal usb%d %d-wire transceiver\n", + 0, nwires); + } + + return syscon1 << 16; +} + +u32 __init omap1_usb1_init(unsigned nwires) +{ + u32 syscon1 = 0; + + if (!cpu_is_omap15xx() && nwires != 6) { + u32 l; + + l = omap_readl(USB_TRANSCEIVER_CTRL); + l &= ~CONF_USB1_UNI_R; + omap_writel(l, USB_TRANSCEIVER_CTRL); + } + if (nwires == 0) + return 0; + + /* external transceiver */ + omap_cfg_reg(USB1_TXD); + omap_cfg_reg(USB1_TXEN); + if (nwires != 3) + omap_cfg_reg(USB1_RCV); + + if (cpu_is_omap15xx()) { + omap_cfg_reg(USB1_SEO); + omap_cfg_reg(USB1_SPEED); + // SUSP + } else if (cpu_is_omap1610() || cpu_is_omap5912()) { + omap_cfg_reg(W13_1610_USB1_SE0); + omap_cfg_reg(R13_1610_USB1_SPEED); + // SUSP + } else if (cpu_is_omap1710()) { + omap_cfg_reg(R13_1710_USB1_SE0); + // SUSP + } else { + pr_debug("usb%d cpu unrecognized\n", 1); + return 0; + } + + switch (nwires) { + case 2: + goto bad; + case 3: + syscon1 = 2; + break; + case 4: + syscon1 = 1; + break; + case 6: + syscon1 = 3; + omap_cfg_reg(USB1_VP); + omap_cfg_reg(USB1_VM); + if (!cpu_is_omap15xx()) { + u32 l; + + l = omap_readl(USB_TRANSCEIVER_CTRL); + l |= CONF_USB1_UNI_R; + omap_writel(l, USB_TRANSCEIVER_CTRL); + } + break; + default: +bad: + printk(KERN_ERR "illegal usb%d %d-wire transceiver\n", + 1, nwires); + } + + return syscon1 << 20; +} + +u32 __init omap1_usb2_init(unsigned nwires, unsigned alt_pingroup) +{ + u32 syscon1 = 0; + + /* NOTE omap1 erratum: must leave USB2_UNI_R set if usb0 in use */ + if (alt_pingroup || nwires == 0) + return 0; + + if (!cpu_is_omap15xx() && nwires != 6) { + u32 l; + + l = omap_readl(USB_TRANSCEIVER_CTRL); + l &= ~CONF_USB2_UNI_R; + omap_writel(l, USB_TRANSCEIVER_CTRL); + } + + /* external transceiver */ + if (cpu_is_omap15xx()) { + omap_cfg_reg(USB2_TXD); + omap_cfg_reg(USB2_TXEN); + omap_cfg_reg(USB2_SEO); + if (nwires != 3) + omap_cfg_reg(USB2_RCV); + /* there is no USB2_SPEED */ + } else if (cpu_is_omap16xx()) { + omap_cfg_reg(V6_USB2_TXD); + omap_cfg_reg(W9_USB2_TXEN); + omap_cfg_reg(W5_USB2_SE0); + if (nwires != 3) + omap_cfg_reg(Y5_USB2_RCV); + // FIXME omap_cfg_reg(USB2_SPEED); + } else { + pr_debug("usb%d cpu unrecognized\n", 1); + return 0; + } + + // omap_cfg_reg(USB2_SUSP); + + switch (nwires) { + case 2: + goto bad; + case 3: + syscon1 = 2; + break; + case 4: + syscon1 = 1; + break; + case 5: + goto bad; + case 6: + syscon1 = 3; + if (cpu_is_omap15xx()) { + omap_cfg_reg(USB2_VP); + omap_cfg_reg(USB2_VM); + } else { + u32 l; + + omap_cfg_reg(AA9_USB2_VP); + omap_cfg_reg(R9_USB2_VM); + l = omap_readl(USB_TRANSCEIVER_CTRL); + l |= CONF_USB2_UNI_R; + omap_writel(l, USB_TRANSCEIVER_CTRL); + } + break; + default: +bad: + printk(KERN_ERR "illegal usb%d %d-wire transceiver\n", + 2, nwires); + } + + return syscon1 << 24; +} + +#ifdef CONFIG_ARCH_OMAP15XX + +/* ULPD_DPLL_CTRL */ +#define DPLL_IOB (1 << 13) +#define DPLL_PLL_ENABLE (1 << 4) +#define DPLL_LOCK (1 << 0) + +/* ULPD_APLL_CTRL */ +#define APLL_NDPLL_SWITCH (1 << 0) + +static void __init omap_1510_usb_init(struct omap_usb_config *config) +{ + unsigned int val; + u16 w; + + config->usb0_init(config->pins[0], is_usb0_device(config)); + config->usb1_init(config->pins[1]); + config->usb2_init(config->pins[2], 0); + + val = omap_readl(MOD_CONF_CTRL_0) & ~(0x3f << 1); + val |= (config->hmc_mode << 1); + omap_writel(val, MOD_CONF_CTRL_0); + + printk("USB: hmc %d", config->hmc_mode); + if (config->pins[0]) + printk(", usb0 %d wires%s", config->pins[0], + is_usb0_device(config) ? " (dev)" : ""); + if (config->pins[1]) + printk(", usb1 %d wires", config->pins[1]); + if (config->pins[2]) + printk(", usb2 %d wires", config->pins[2]); + printk("\n"); + + /* use DPLL for 48 MHz function clock */ + pr_debug("APLL %04x DPLL %04x REQ %04x\n", omap_readw(ULPD_APLL_CTRL), + omap_readw(ULPD_DPLL_CTRL), omap_readw(ULPD_SOFT_REQ)); + + w = omap_readw(ULPD_APLL_CTRL); + w &= ~APLL_NDPLL_SWITCH; + omap_writew(w, ULPD_APLL_CTRL); + + w = omap_readw(ULPD_DPLL_CTRL); + w |= DPLL_IOB | DPLL_PLL_ENABLE; + omap_writew(w, ULPD_DPLL_CTRL); + + w = omap_readw(ULPD_SOFT_REQ); + w |= SOFT_UDC_REQ | SOFT_DPLL_REQ; + omap_writew(w, ULPD_SOFT_REQ); + + while (!(omap_readw(ULPD_DPLL_CTRL) & DPLL_LOCK)) + cpu_relax(); + +#ifdef CONFIG_USB_GADGET_OMAP + if (config->register_dev) { + int status; + + udc_device.dev.platform_data = config; + status = platform_device_register(&udc_device); + if (status) + pr_debug("can't register UDC device, %d\n", status); + /* udc driver gates 48MHz by D+ pullup */ + } +#endif + +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) + if (config->register_host) { + int status; + + ohci_device.dev.platform_data = config; + status = platform_device_register(&ohci_device); + if (status) + pr_debug("can't register OHCI device, %d\n", status); + /* hcd explicitly gates 48MHz */ + } +#endif +} + +#else +static inline void omap_1510_usb_init(struct omap_usb_config *config) {} +#endif + +void __init omap1_usb_init(struct omap_usb_config *pdata) +{ + pdata->usb0_init = omap1_usb0_init; + pdata->usb1_init = omap1_usb1_init; + pdata->usb2_init = omap1_usb2_init; + udc_device_init(pdata); + ohci_device_init(pdata); + otg_device_init(pdata); + + if (cpu_is_omap7xx() || cpu_is_omap16xx()) + omap_otg_init(pdata); + else if (cpu_is_omap15xx()) + omap_1510_usb_init(pdata); + else + printk(KERN_ERR "USB: No init for your chip yet\n"); +} diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h index 9f792244e77c..2a9427c8cc48 100644 --- a/arch/arm/plat-omap/include/plat/usb.h +++ b/arch/arm/plat-omap/include/plat/usb.h @@ -81,8 +81,28 @@ extern void usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata); #endif + +/* + * FIXME correct answer depends on hmc_mode, + * as does (on omap1) any nonzero value for config->otg port number + */ +#ifdef CONFIG_USB_GADGET_OMAP +#define is_usb0_device(config) 1 +#else +#define is_usb0_device(config) 0 +#endif + void omap_otg_init(struct omap_usb_config *config); -void omap_usb_init(struct omap_usb_config *pdata); + +#if defined(CONFIG_USB) || defined(CONFIG_USB_MODULE) +void omap1_usb_init(struct omap_usb_config *pdata); +#else +static inline void omap1_usb_init(struct omap_usb_config *pdata) +{ +} +#endif + +#if defined(CONFIG_ARCH_OMAP_OTG) || defined(CONFIG_ARCH_OMAP_OTG_MODULE) void omap2_usbfs_init(struct omap_usb_config *pdata); #else static inline omap2_usbfs_init(struct omap_usb_config *pdata) @@ -199,4 +219,24 @@ static inline omap2_usbfs_init(struct omap_usb_config *pdata) # define USB0PUENACTLOI (1 << 16) # define USBSTANDBYCTRL (1 << 15) +#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_USB) +u32 omap1_usb0_init(unsigned nwires, unsigned is_device); +u32 omap1_usb1_init(unsigned nwires); +u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup); +#else +static inline u32 omap1_usb0_init(unsigned nwires, unsigned is_device) +{ + return 0; +} +static inline u32 omap1_usb1_init(unsigned nwires) +{ + return 0; + +} +static inline u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup) +{ + return 0; +} +#endif + #endif /* __ASM_ARCH_OMAP_USB_H */ diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c index 27b471ce11a0..f3570884883e 100644 --- a/arch/arm/plat-omap/usb.c +++ b/arch/arm/plat-omap/usb.c @@ -22,434 +22,13 @@ #include #include -#include -#include #include #include -#include #include -#include -#include -#include - -#include -#include #include #include -#define INT_USB_IRQ_GEN IH2_BASE + 20 -#define INT_USB_IRQ_NISO IH2_BASE + 30 -#define INT_USB_IRQ_ISO IH2_BASE + 29 -#define INT_USB_IRQ_HGEN INT_USB_HHC_1 -#define INT_USB_IRQ_OTG IH2_BASE + 8 - -/* These routines should handle the standard chip-specific modes - * for usb0/1/2 ports, covering basic mux and transceiver setup. - * - * Some board-*.c files will need to set up additional mux options, - * like for suspend handling, vbus sensing, GPIOs, and the D+ pullup. - */ - -/* TESTED ON: - * - 1611B H2 (with usb1 mini-AB) using standard Mini-B or OTG cables - * - 5912 OSK OHCI (with usb0 standard-A), standard A-to-B cables - * - 5912 OSK UDC, with *nonstandard* A-to-A cable - * - 1510 Innovator UDC with bundled usb0 cable - * - 1510 Innovator OHCI with bundled usb1/usb2 cable - * - 1510 Innovator OHCI with custom usb0 cable, feeding 5V VBUS - * - 1710 custom development board using alternate pin group - * - 1710 H3 (with usb1 mini-AB) using standard Mini-B or OTG cables - */ - -/*-------------------------------------------------------------------------*/ - -#if defined(CONFIG_ARCH_OMAP_OTG) || defined(CONFIG_ARCH_OMAP15XX) - -static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device) -{ - u32 syscon1 = 0; - - if (nwires == 0) { - if (!cpu_is_omap15xx()) { - u32 l; - - /* pulldown D+/D- */ - l = omap_readl(USB_TRANSCEIVER_CTRL); - l &= ~(3 << 1); - omap_writel(l, USB_TRANSCEIVER_CTRL); - } - return 0; - } - - if (is_device) { - if (cpu_is_omap7xx()) { - omap_cfg_reg(AA17_7XX_USB_DM); - omap_cfg_reg(W16_7XX_USB_PU_EN); - omap_cfg_reg(W17_7XX_USB_VBUSI); - omap_cfg_reg(W18_7XX_USB_DMCK_OUT); - omap_cfg_reg(W19_7XX_USB_DCRST); - } else - omap_cfg_reg(W4_USB_PUEN); - } - - if (nwires == 2) { - u32 l; - - // omap_cfg_reg(P9_USB_DP); - // omap_cfg_reg(R8_USB_DM); - - if (cpu_is_omap15xx()) { - /* This works on 1510-Innovator */ - return 0; - } - - /* NOTES: - * - peripheral should configure VBUS detection! - * - only peripherals may use the internal D+/D- pulldowns - * - OTG support on this port not yet written - */ - - /* Don't do this for omap7xx -- it causes USB to not work correctly */ - if (!cpu_is_omap7xx()) { - l = omap_readl(USB_TRANSCEIVER_CTRL); - l &= ~(7 << 4); - if (!is_device) - l |= (3 << 1); - omap_writel(l, USB_TRANSCEIVER_CTRL); - } - - return 3 << 16; - } - - /* alternate pin config, external transceiver */ - if (cpu_is_omap15xx()) { - printk(KERN_ERR "no usb0 alt pin config on 15xx\n"); - return 0; - } - - omap_cfg_reg(V6_USB0_TXD); - omap_cfg_reg(W9_USB0_TXEN); - omap_cfg_reg(W5_USB0_SE0); - if (nwires != 3) - omap_cfg_reg(Y5_USB0_RCV); - - /* NOTE: SPEED and SUSP aren't configured here. OTG hosts - * may be able to use I2C requests to set those bits along - * with VBUS switching and overcurrent detection. - */ - - if (nwires != 6) { - u32 l; - - l = omap_readl(USB_TRANSCEIVER_CTRL); - l &= ~CONF_USB2_UNI_R; - omap_writel(l, USB_TRANSCEIVER_CTRL); - } - - switch (nwires) { - case 3: - syscon1 = 2; - break; - case 4: - syscon1 = 1; - break; - case 6: - syscon1 = 3; - { - u32 l; - - omap_cfg_reg(AA9_USB0_VP); - omap_cfg_reg(R9_USB0_VM); - l = omap_readl(USB_TRANSCEIVER_CTRL); - l |= CONF_USB2_UNI_R; - omap_writel(l, USB_TRANSCEIVER_CTRL); - } - break; - default: - printk(KERN_ERR "illegal usb%d %d-wire transceiver\n", - 0, nwires); - } - return syscon1 << 16; -} - -static u32 __init omap_usb1_init(unsigned nwires) -{ - u32 syscon1 = 0; - - if (!cpu_is_omap15xx() && nwires != 6) { - u32 l; - - l = omap_readl(USB_TRANSCEIVER_CTRL); - l &= ~CONF_USB1_UNI_R; - omap_writel(l, USB_TRANSCEIVER_CTRL); - } - if (nwires == 0) - return 0; - - /* external transceiver */ - omap_cfg_reg(USB1_TXD); - omap_cfg_reg(USB1_TXEN); - if (nwires != 3) - omap_cfg_reg(USB1_RCV); - - if (cpu_is_omap15xx()) { - omap_cfg_reg(USB1_SEO); - omap_cfg_reg(USB1_SPEED); - // SUSP - } else if (cpu_is_omap1610() || cpu_is_omap5912()) { - omap_cfg_reg(W13_1610_USB1_SE0); - omap_cfg_reg(R13_1610_USB1_SPEED); - // SUSP - } else if (cpu_is_omap1710()) { - omap_cfg_reg(R13_1710_USB1_SE0); - // SUSP - } else { - pr_debug("usb%d cpu unrecognized\n", 1); - return 0; - } - - switch (nwires) { - case 2: - goto bad; - case 3: - syscon1 = 2; - break; - case 4: - syscon1 = 1; - break; - case 6: - syscon1 = 3; - omap_cfg_reg(USB1_VP); - omap_cfg_reg(USB1_VM); - if (!cpu_is_omap15xx()) { - u32 l; - - l = omap_readl(USB_TRANSCEIVER_CTRL); - l |= CONF_USB1_UNI_R; - omap_writel(l, USB_TRANSCEIVER_CTRL); - } - break; - default: -bad: - printk(KERN_ERR "illegal usb%d %d-wire transceiver\n", - 1, nwires); - } - return syscon1 << 20; -} - -static u32 __init omap_usb2_init(unsigned nwires, unsigned alt_pingroup) -{ - u32 syscon1 = 0; - - /* NOTE omap1 erratum: must leave USB2_UNI_R set if usb0 in use */ - if (alt_pingroup || nwires == 0) - return 0; - - if (!cpu_is_omap15xx() && nwires != 6) { - u32 l; - - l = omap_readl(USB_TRANSCEIVER_CTRL); - l &= ~CONF_USB2_UNI_R; - omap_writel(l, USB_TRANSCEIVER_CTRL); - } - - /* external transceiver */ - if (cpu_is_omap15xx()) { - omap_cfg_reg(USB2_TXD); - omap_cfg_reg(USB2_TXEN); - omap_cfg_reg(USB2_SEO); - if (nwires != 3) - omap_cfg_reg(USB2_RCV); - /* there is no USB2_SPEED */ - } else if (cpu_is_omap16xx()) { - omap_cfg_reg(V6_USB2_TXD); - omap_cfg_reg(W9_USB2_TXEN); - omap_cfg_reg(W5_USB2_SE0); - if (nwires != 3) - omap_cfg_reg(Y5_USB2_RCV); - // FIXME omap_cfg_reg(USB2_SPEED); - } else { - pr_debug("usb%d cpu unrecognized\n", 1); - return 0; - } - // omap_cfg_reg(USB2_SUSP); - - switch (nwires) { - case 2: - goto bad; - case 3: - syscon1 = 2; - break; - case 4: - syscon1 = 1; - break; - case 5: - goto bad; - case 6: - syscon1 = 3; - if (cpu_is_omap15xx()) { - omap_cfg_reg(USB2_VP); - omap_cfg_reg(USB2_VM); - } else { - u32 l; - - omap_cfg_reg(AA9_USB2_VP); - omap_cfg_reg(R9_USB2_VM); - l = omap_readl(USB_TRANSCEIVER_CTRL); - l |= CONF_USB2_UNI_R; - omap_writel(l, USB_TRANSCEIVER_CTRL); - } - break; - default: -bad: - printk(KERN_ERR "illegal usb%d %d-wire transceiver\n", - 2, nwires); - } - return syscon1 << 24; -} - -#else -#define omap_usb0_init NULL -#define omap_usb1_init NULL -#define omap_usb2_init NULL -#endif - -/*-------------------------------------------------------------------------*/ - -#ifdef CONFIG_USB_GADGET_OMAP - -static struct resource udc_resources[] = { - /* order is significant! */ - { /* registers */ - .start = UDC_BASE, - .end = UDC_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, { /* general IRQ */ - .start = INT_USB_IRQ_GEN, - .flags = IORESOURCE_IRQ, - }, { /* PIO IRQ */ - .start = INT_USB_IRQ_NISO, - .flags = IORESOURCE_IRQ, - }, { /* SOF IRQ */ - .start = INT_USB_IRQ_ISO, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 udc_dmamask = ~(u32)0; - -static struct platform_device udc_device = { - .name = "omap_udc", - .id = -1, - .dev = { - .dma_mask = &udc_dmamask, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(udc_resources), - .resource = udc_resources, -}; - -static inline void udc_device_init(struct omap_usb_config *pdata) -{ - pdata->udc_device = &udc_device; -} - -#else - -static inline void udc_device_init(struct omap_usb_config *pdata) -{ -} - -#endif - -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) - -/* The dmamask must be set for OHCI to work */ -static u64 ohci_dmamask = ~(u32)0; - -static struct resource ohci_resources[] = { - { - .start = OMAP_OHCI_BASE, - .end = OMAP_OHCI_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_USB_IRQ_HGEN, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device ohci_device = { - .name = "ohci", - .id = -1, - .dev = { - .dma_mask = &ohci_dmamask, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(ohci_resources), - .resource = ohci_resources, -}; - -static inline void ohci_device_init(struct omap_usb_config *pdata) -{ - pdata->ohci_device = &ohci_device; -} - -#else - -static inline void ohci_device_init(struct omap_usb_config *pdata) -{ -} - -#endif - -#if defined(CONFIG_USB_OTG) && defined(CONFIG_ARCH_OMAP_OTG) - -static struct resource otg_resources[] = { - /* order is significant! */ - { - .start = OTG_BASE, - .end = OTG_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, { - .start = INT_USB_IRQ_OTG, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device otg_device = { - .name = "omap_otg", - .id = -1, - .num_resources = ARRAY_SIZE(otg_resources), - .resource = otg_resources, -}; - -static inline void otg_device_init(struct omap_usb_config *pdata) -{ - pdata->otg_device = &otg_device; -} - -#else - -static inline void otg_device_init(struct omap_usb_config *pdata) -{ -} - -#endif - -/*-------------------------------------------------------------------------*/ - -// FIXME correct answer depends on hmc_mode, -// as does (on omap1) any nonzero value for config->otg port number -#ifdef CONFIG_USB_GADGET_OMAP -#define is_usb0_device(config) 1 -#else -#define is_usb0_device(config) 0 -#endif - -/*-------------------------------------------------------------------------*/ - #ifdef CONFIG_ARCH_OMAP_OTG void __init @@ -524,12 +103,6 @@ omap_otg_init(struct omap_usb_config *config) syscon &= ~DEV_IDLE_EN; udc_device->dev.platform_data = config; - /* IRQ numbers for omap7xx */ - if(cpu_is_omap7xx()) { - udc_resources[1].start = INT_7XX_USB_GENI; - udc_resources[2].start = INT_7XX_USB_NON_ISO; - udc_resources[3].start = INT_7XX_USB_ISO; - } status = platform_device_register(udc_device); if (status) pr_debug("can't register UDC device, %d\n", status); @@ -542,8 +115,6 @@ omap_otg_init(struct omap_usb_config *config) syscon &= ~HST_IDLE_EN; ohci_device->dev.platform_data = config; - if (cpu_is_omap7xx()) - ohci_resources[1].start = INT_7XX_USB_HHC_1; status = platform_device_register(ohci_device); if (status) pr_debug("can't register OHCI device, %d\n", status); @@ -556,8 +127,6 @@ omap_otg_init(struct omap_usb_config *config) syscon &= ~OTG_IDLE_EN; otg_device->dev.platform_data = config; - if (cpu_is_omap7xx()) - otg_resources[1].start = INT_7XX_USB_OTG; status = platform_device_register(otg_device); if (status) pr_debug("can't register OTG device, %d\n", status); @@ -572,107 +141,3 @@ omap_otg_init(struct omap_usb_config *config) #else void omap_otg_init(struct omap_usb_config *config) {} #endif - -/*-------------------------------------------------------------------------*/ - -#ifdef CONFIG_ARCH_OMAP15XX - -/* ULPD_DPLL_CTRL */ -#define DPLL_IOB (1 << 13) -#define DPLL_PLL_ENABLE (1 << 4) -#define DPLL_LOCK (1 << 0) - -/* ULPD_APLL_CTRL */ -#define APLL_NDPLL_SWITCH (1 << 0) - - -static void __init omap_1510_usb_init(struct omap_usb_config *config) -{ - unsigned int val; - u16 w; - - config->usb0_init(config->pins[0], is_usb0_device(config)); - config->usb1_init(config->pins[1]); - config->usb2_init(config->pins[2], 0); - - val = omap_readl(MOD_CONF_CTRL_0) & ~(0x3f << 1); - val |= (config->hmc_mode << 1); - omap_writel(val, MOD_CONF_CTRL_0); - - printk("USB: hmc %d", config->hmc_mode); - if (config->pins[0]) - printk(", usb0 %d wires%s", config->pins[0], - is_usb0_device(config) ? " (dev)" : ""); - if (config->pins[1]) - printk(", usb1 %d wires", config->pins[1]); - if (config->pins[2]) - printk(", usb2 %d wires", config->pins[2]); - printk("\n"); - - /* use DPLL for 48 MHz function clock */ - pr_debug("APLL %04x DPLL %04x REQ %04x\n", omap_readw(ULPD_APLL_CTRL), - omap_readw(ULPD_DPLL_CTRL), omap_readw(ULPD_SOFT_REQ)); - - w = omap_readw(ULPD_APLL_CTRL); - w &= ~APLL_NDPLL_SWITCH; - omap_writew(w, ULPD_APLL_CTRL); - - w = omap_readw(ULPD_DPLL_CTRL); - w |= DPLL_IOB | DPLL_PLL_ENABLE; - omap_writew(w, ULPD_DPLL_CTRL); - - w = omap_readw(ULPD_SOFT_REQ); - w |= SOFT_UDC_REQ | SOFT_DPLL_REQ; - omap_writew(w, ULPD_SOFT_REQ); - - while (!(omap_readw(ULPD_DPLL_CTRL) & DPLL_LOCK)) - cpu_relax(); - -#ifdef CONFIG_USB_GADGET_OMAP - if (config->register_dev) { - int status; - - udc_device.dev.platform_data = config; - status = platform_device_register(&udc_device); - if (status) - pr_debug("can't register UDC device, %d\n", status); - /* udc driver gates 48MHz by D+ pullup */ - } -#endif - -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) - if (config->register_host) { - int status; - - ohci_device.dev.platform_data = config; - status = platform_device_register(&ohci_device); - if (status) - pr_debug("can't register OHCI device, %d\n", status); - /* hcd explicitly gates 48MHz */ - } -#endif -} - -#else -static inline void omap_1510_usb_init(struct omap_usb_config *config) {} -#endif - -/*-------------------------------------------------------------------------*/ - -void __init omap_usb_init(struct omap_usb_config *pdata) -{ - pdata->usb0_init = omap_usb0_init; - pdata->usb1_init = omap_usb1_init; - pdata->usb2_init = omap_usb2_init; - udc_device_init(pdata); - ohci_device_init(pdata); - otg_device_init(pdata); - - if (cpu_is_omap7xx() || cpu_is_omap16xx()) - omap_otg_init(pdata); - else if (cpu_is_omap15xx()) - omap_1510_usb_init(pdata); - else - printk(KERN_ERR "USB: No init for your chip yet\n"); -} - -- 2.34.1