From f36af3fd377081d3ac2ff6b63a60f8db8b3bf531 Mon Sep 17 00:00:00 2001 From: Yoshinori Sato Date: Sun, 5 Nov 2006 16:21:09 +0900 Subject: [PATCH] sh: Add support for Solution Engine 7206 and 7619 boards. This adds support for the Solution Engine 7206 and 7619. Signed-off-by: Yoshinori Sato Signed-off-by: Paul Mundt --- arch/sh/boards/se/7206/Makefile | 7 + arch/sh/boards/se/7206/io.c | 123 +++++ arch/sh/boards/se/7206/irq.c | 161 ++++++ arch/sh/boards/se/7206/led.c | 57 +++ arch/sh/boards/se/7206/setup.c | 80 +++ arch/sh/boards/se/7619/Makefile | 5 + arch/sh/boards/se/7619/io.c | 102 ++++ arch/sh/boards/se/7619/setup.c | 43 ++ arch/sh/configs/se7206_defconfig | 826 +++++++++++++++++++++++++++++++ 9 files changed, 1404 insertions(+) create mode 100644 arch/sh/boards/se/7206/Makefile create mode 100644 arch/sh/boards/se/7206/io.c create mode 100644 arch/sh/boards/se/7206/irq.c create mode 100644 arch/sh/boards/se/7206/led.c create mode 100644 arch/sh/boards/se/7206/setup.c create mode 100644 arch/sh/boards/se/7619/Makefile create mode 100644 arch/sh/boards/se/7619/io.c create mode 100644 arch/sh/boards/se/7619/setup.c create mode 100644 arch/sh/configs/se7206_defconfig diff --git a/arch/sh/boards/se/7206/Makefile b/arch/sh/boards/se/7206/Makefile new file mode 100644 index 000000000000..63950f4f2453 --- /dev/null +++ b/arch/sh/boards/se/7206/Makefile @@ -0,0 +1,7 @@ +# +# Makefile for the 7206 SolutionEngine specific parts of the kernel +# + +obj-y := setup.o io.o irq.o +obj-$(CONFIG_HEARTBEAT) += led.o + diff --git a/arch/sh/boards/se/7206/io.c b/arch/sh/boards/se/7206/io.c new file mode 100644 index 000000000000..b557273e0cbe --- /dev/null +++ b/arch/sh/boards/se/7206/io.c @@ -0,0 +1,123 @@ +/* $Id: io.c,v 1.5 2004/02/22 23:08:43 kkojima Exp $ + * + * linux/arch/sh/boards/se/7206/io.c + * + * Copyright (C) 2006 Yoshinori Sato + * + * I/O routine for Hitachi 7206 SolutionEngine. + * + */ + +#include +#include +#include +#include + + +static inline void delay(void) +{ + ctrl_inw(0x20000000); /* P2 ROM Area */ +} + +/* MS7750 requires special versions of in*, out* routines, since + PC-like io ports are located at upper half byte of 16-bit word which + can be accessed only with 16-bit wide. */ + +static inline volatile __u16 * +port2adr(unsigned int port) +{ + if (port >= 0x2000) + return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000)); + else if (port >= 0x300 || port < 0x310) + return (volatile __u16 *) (PA_SMSC + (port - 0x300)); +} + +unsigned char se7206_inb(unsigned long port) +{ + return (*port2adr(port))&0xff; +} + +unsigned char se7206_inb_p(unsigned long port) +{ + unsigned long v; + + v = (*port2adr(port))&0xff; + delay(); + return v; +} + +unsigned short se7206_inw(unsigned long port) +{ + return *port2adr(port);; +} + +unsigned int se7206_inl(unsigned long port) +{ + maybebadio(port); + return 0; +} + +void se7206_outb(unsigned char value, unsigned long port) +{ + *(port2adr(port)) = value; +} + +void se7206_outb_p(unsigned char value, unsigned long port) +{ + *(port2adr(port)) = value; + delay(); +} + +void se7206_outw(unsigned short value, unsigned long port) +{ + *port2adr(port) = value; +} + +void se7206_outl(unsigned int value, unsigned long port) +{ + maybebadio(port); +} + +void se7206_insb(unsigned long port, void *addr, unsigned long count) +{ + volatile __u16 *p = port2adr(port); + __u8 *ap = addr; + + while (count--) + *ap++ = *p; +} + +void se7206_insw(unsigned long port, void *addr, unsigned long count) +{ + volatile __u16 *p = port2adr(port); + __u16 *ap = addr; + while (count--) + *ap++ = *p; +} + +void se7206_insl(unsigned long port, void *addr, unsigned long count) +{ + maybebadio(port); +} + +void se7206_outsb(unsigned long port, const void *addr, unsigned long count) +{ + volatile __u16 *p = port2adr(port); + const __u8 *ap = addr; + + while (count--) + *p = *ap++; +} + +void se7206_outsw(unsigned long port, const void *addr, unsigned long count) +{ + volatile __u16 *p = port2adr(port); + const __u16 *ap = addr; + while (count--) + *p = *ap++; +} + +void se7206_outsl(unsigned long port, const void *addr, unsigned long count) +{ + maybebadio(port); +} diff --git a/arch/sh/boards/se/7206/irq.c b/arch/sh/boards/se/7206/irq.c new file mode 100644 index 000000000000..8d5b278a124d --- /dev/null +++ b/arch/sh/boards/se/7206/irq.c @@ -0,0 +1,161 @@ +/* + * linux/arch/sh/boards/se/7206/irq.c + * + * Copyright (C) 2005,2006 Yoshinori Sato + * + * Hitachi SolutionEngine Support. + * + */ + +#include +#include +#include +#include +#include +#include + +#define INTSTS0 0x31800000 +#define INTSTS1 0x31800002 +#define INTMSK0 0x31800004 +#define INTMSK1 0x31800006 +#define INTSEL 0x31800008 + +/* shutdown is same as "disable" */ +#define shutdown_se7206_irq disable_se7206_irq + +static void disable_se7206_irq(unsigned int irq) +{ + unsigned short val; + unsigned short mask = 0xffff ^ (0x0f << 4 * (3 - (IRQ0_IRQ - irq))); + unsigned short msk0,msk1; + + /* Set the priority in IPR to 0 */ + val = ctrl_inw(INTC_IPR01); + val &= mask; + ctrl_outw(val, INTC_IPR01); + /* FPGA mask set */ + msk0 = ctrl_inw(INTMSK0); + msk1 = ctrl_inw(INTMSK1); + + switch (irq) { + case IRQ0_IRQ: + msk0 |= 0x0010; + break; + case IRQ1_IRQ: + msk0 |= 0x000f; + break; + case IRQ2_IRQ: + msk0 |= 0x0f00; + msk1 |= 0x00ff; + break; + } + ctrl_outw(msk0, INTMSK0); + ctrl_outw(msk1, INTMSK1); +} + +static void enable_se7206_irq(unsigned int irq) +{ + unsigned short val; + unsigned short value = (0x0001 << 4 * (3 - (IRQ0_IRQ - irq))); + unsigned short msk0,msk1; + + /* Set priority in IPR back to original value */ + val = ctrl_inw(INTC_IPR01); + val |= value; + ctrl_outw(val, INTC_IPR01); + + /* FPGA mask reset */ + msk0 = ctrl_inw(INTMSK0); + msk1 = ctrl_inw(INTMSK1); + + switch (irq) { + case IRQ0_IRQ: + msk0 &= ~0x0010; + break; + case IRQ1_IRQ: + msk0 &= ~0x000f; + break; + case IRQ2_IRQ: + msk0 &= ~0x0f00; + msk1 &= ~0x00ff; + break; + } + ctrl_outw(msk0, INTMSK0); + ctrl_outw(msk1, INTMSK1); +} + +static unsigned int startup_se7206_irq(unsigned int irq) +{ + enable_se7206_irq(irq); + return 0; /* never anything pending */ +} + +static void ack_se7206_irq(unsigned int irq) +{ + disable_se7206_irq(irq); +} + +static void end_se7206_irq(unsigned int irq) +{ + unsigned short sts0,sts1; + + if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) + enable_se7206_irq(irq); + /* FPGA isr clear */ + sts0 = ctrl_inw(INTSTS0); + sts1 = ctrl_inw(INTSTS1); + + switch (irq) { + case IRQ0_IRQ: + sts0 &= ~0x0010; + break; + case IRQ1_IRQ: + sts0 &= ~0x000f; + break; + case IRQ2_IRQ: + sts0 &= ~0x0f00; + sts1 &= ~0x00ff; + break; + } + ctrl_outw(sts0, INTSTS0); + ctrl_outw(sts1, INTSTS1); +} + +static struct hw_interrupt_type se7206_irq_type = { + .typename = "SE7206 FPGA-IRQ", + .startup = startup_se7206_irq, + .shutdown = shutdown_se7206_irq, + .enable = enable_se7206_irq, + .disable = disable_se7206_irq, + .ack = ack_se7206_irq, + .end = end_se7206_irq, +}; + +static void make_se7206_irq(unsigned int irq) +{ + disable_irq_nosync(irq); + irq_desc[irq].handler = &se7206_irq_type; + disable_se7206_irq(irq); +} + +/* + * Initialize IRQ setting + */ +void __init init_se7206_IRQ(void) +{ + make_se7206_irq(IRQ0_IRQ); /* SMC91C111 */ + make_se7206_irq(IRQ1_IRQ); /* ATA */ + make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */ + ctrl_outw(inw(INTC_ICR1) | 0x000b ,INTC_ICR1 ) ; /* ICR1 */ + + /* FPGA System register setup*/ + ctrl_outw(0x0000,INTSTS0); /* Clear INTSTS0 */ + ctrl_outw(0x0000,INTSTS1); /* Clear INTSTS1 */ + /* IRQ0=LAN, IRQ1=ATA, IRQ3=SLT,PCM */ + ctrl_outw(0x0001,INTSEL); +} + +int se7206_irq_demux(int irq) +{ + return irq; +} diff --git a/arch/sh/boards/se/7206/led.c b/arch/sh/boards/se/7206/led.c new file mode 100644 index 000000000000..ef794601ab86 --- /dev/null +++ b/arch/sh/boards/se/7206/led.c @@ -0,0 +1,57 @@ +/* + * linux/arch/sh/kernel/led_se.c + * + * Copyright (C) 2000 Stuart Menefy + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * This file contains Solution Engine specific LED code. + */ + +#include +#include + +#ifdef CONFIG_HEARTBEAT + +#include + +/* Cycle the LED's in the clasic Knightrider/Sun pattern */ +void heartbeat_se(void) +{ + static unsigned int cnt = 0, period = 0; + volatile unsigned short* p = (volatile unsigned short*)PA_LED; + static unsigned bit = 0, up = 1; + + cnt += 1; + if (cnt < period) { + return; + } + + cnt = 0; + + /* Go through the points (roughly!): + * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 + */ + period = 110 - ( (300< +#include +#include +#include +#include + +static struct resource smc91x_resources[] = { + [0] = { + .start = 0x300, + .end = 0x300 + 0x020 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 64, + .end = 64, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = -1, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; + +static int __init se7206_devices_setup(void) +{ + return platform_device_register(&smc91x_device); +} + +__initcall(se7206_devices_setup); + +void heartbeat_se(void); + +/* + * The Machine Vector + */ + +struct sh_machine_vector mv_se __initmv = { + .mv_name = "SolutionEngine", + .mv_nr_irqs = 256, + .mv_inb = se7206_inb, + .mv_inw = se7206_inw, + .mv_inl = se7206_inl, + .mv_outb = se7206_outb, + .mv_outw = se7206_outw, + .mv_outl = se7206_outl, + + .mv_inb_p = se7206_inb_p, + .mv_inw_p = se7206_inw, + .mv_inl_p = se7206_inl, + .mv_outb_p = se7206_outb_p, + .mv_outw_p = se7206_outw, + .mv_outl_p = se7206_outl, + + .mv_insb = se7206_insb, + .mv_insw = se7206_insw, + .mv_insl = se7206_insl, + .mv_outsb = se7206_outsb, + .mv_outsw = se7206_outsw, + .mv_outsl = se7206_outsl, + + .mv_init_irq = init_se7206_IRQ, + .mv_irq_demux = se7206_irq_demux, +#ifdef CONFIG_HEARTBEAT + .mv_heartbeat = heartbeat_se, +#endif +}; +ALIAS_MV(se) diff --git a/arch/sh/boards/se/7619/Makefile b/arch/sh/boards/se/7619/Makefile new file mode 100644 index 000000000000..3666eca8a658 --- /dev/null +++ b/arch/sh/boards/se/7619/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the 7619 SolutionEngine specific parts of the kernel +# + +obj-y := setup.o io.o diff --git a/arch/sh/boards/se/7619/io.c b/arch/sh/boards/se/7619/io.c new file mode 100644 index 000000000000..176f1f39cd9d --- /dev/null +++ b/arch/sh/boards/se/7619/io.c @@ -0,0 +1,102 @@ +/* + * + * linux/arch/sh/boards/se/7619/io.c + * + * Copyright (C) 2006 Yoshinori Sato + * + * I/O routine for Hitachi 7619 SolutionEngine. + * + */ + +#include +#include +#include +#include +#include + +/* FIXME: M3A-ZAB7 Compact Flash Slot support */ + +static inline void delay(void) +{ + ctrl_inw(0xa0000000); /* Uncached ROM area (P2) */ +} + +#define badio(name,port) \ + printk("bad I/O operation (%s) for port 0x%lx at 0x%08x\n", \ + #name, (port), (__u32) __builtin_return_address(0)) + +unsigned char se7619___inb(unsigned long port) +{ + badio(inb, port); + return 0; +} + +unsigned char se7619___inb_p(unsigned long port) +{ + badio(inb_p, port); + delay(); + return 0; +} + +unsigned short se7619___inw(unsigned long port) +{ + badio(inw, port); + return 0; +} + +unsigned int se7619___inl(unsigned long port) +{ + badio(inl, port); + return 0; +} + +void se7619___outb(unsigned char value, unsigned long port) +{ + badio(outb, port); +} + +void se7619___outb_p(unsigned char value, unsigned long port) +{ + badio(outb_p, port); + delay(); +} + +void se7619___outw(unsigned short value, unsigned long port) +{ + badio(outw, port); +} + +void se7619___outl(unsigned int value, unsigned long port) +{ + badio(outl, port); +} + +void se7619___insb(unsigned long port, void *addr, unsigned long count) +{ + badio(inw, port); +} + +void se7619___insw(unsigned long port, void *addr, unsigned long count) +{ + badio(inw, port); +} + +void se7619___insl(unsigned long port, void *addr, unsigned long count) +{ + badio(insl, port); +} + +void se7619___outsb(unsigned long port, const void *addr, unsigned long count) +{ + badio(insl, port); +} + +void se7619___outsw(unsigned long port, const void *addr, unsigned long count) +{ + badio(insl, port); +} + +void se7619___outsl(unsigned long port, const void *addr, unsigned long count) +{ + badio(outsw, port); +} diff --git a/arch/sh/boards/se/7619/setup.c b/arch/sh/boards/se/7619/setup.c new file mode 100644 index 000000000000..e627b26de0d0 --- /dev/null +++ b/arch/sh/boards/se/7619/setup.c @@ -0,0 +1,43 @@ +/* + * arch/sh/boards/se/7619/setup.c + * + * Copyright (C) 2006 Yoshinori Sato + * + * Hitachi SH7619 SolutionEngine Support. + */ + +#include +#include +#include +#include +#include + +/* + * The Machine Vector + */ + +struct sh_machine_vector mv_se __initmv = { + .mv_name = "SolutionEngine", + .mv_nr_irqs = 108, + .mv_inb = se7619___inb, + .mv_inw = se7619___inw, + .mv_inl = se7619___inl, + .mv_outb = se7619___outb, + .mv_outw = se7619___outw, + .mv_outl = se7619___outl, + + .mv_inb_p = se7619___inb_p, + .mv_inw_p = se7619___inw, + .mv_inl_p = se7619___inl, + .mv_outb_p = se7619___outb_p, + .mv_outw_p = se7619___outw, + .mv_outl_p = se7619___outl, + + .mv_insb = se7619___insb, + .mv_insw = se7619___insw, + .mv_insl = se7619___insl, + .mv_outsb = se7619___outsb, + .mv_outsw = se7619___outsw, + .mv_outsl = se7619___outsl, +}; +ALIAS_MV(se) diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig new file mode 100644 index 000000000000..36cec0b6e7c1 --- /dev/null +++ b/arch/sh/configs/se7206_defconfig @@ -0,0 +1,826 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.19-rc4 +# Sun Nov 5 16:20:10 2006 +# +CONFIG_SUPERH=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_TIME is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SYSVIPC is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_HOTPLUG is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +# CONFIG_FUTEX is not set +# CONFIG_EPOLL is not set +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +# CONFIG_MODULES is not set + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" + +# +# System type +# +# CONFIG_SH_SOLUTION_ENGINE is not set +# CONFIG_SH_7751_SOLUTION_ENGINE is not set +# CONFIG_SH_7300_SOLUTION_ENGINE is not set +# CONFIG_SH_7343_SOLUTION_ENGINE is not set +# CONFIG_SH_73180_SOLUTION_ENGINE is not set +# CONFIG_SH_7751_SYSTEMH is not set +# CONFIG_SH_HP6XX is not set +# CONFIG_SH_EC3104 is not set +# CONFIG_SH_SATURN is not set +# CONFIG_SH_DREAMCAST is not set +# CONFIG_SH_BIGSUR is not set +# CONFIG_SH_MPC1211 is not set +# CONFIG_SH_SH03 is not set +# CONFIG_SH_SECUREEDGE5410 is not set +# CONFIG_SH_HS7751RVOIP is not set +# CONFIG_SH_7710VOIPGW is not set +# CONFIG_SH_RTS7751R2D is not set +# CONFIG_SH_R7780RP is not set +# CONFIG_SH_EDOSK7705 is not set +# CONFIG_SH_SH4202_MICRODEV is not set +# CONFIG_SH_LANDISK is not set +# CONFIG_SH_TITAN is not set +# CONFIG_SH_SHMIN is not set +CONFIG_SH_7206_SOLUTION_ENGINE=y +# CONFIG_SH_7619_SOLUTION_ENGINE is not set +# CONFIG_SH_UNKNOWN is not set + +# +# Processor selection +# +CONFIG_CPU_SH2=y +CONFIG_CPU_SH2A=y + +# +# SH-2 Processor Support +# +# CONFIG_CPU_SUBTYPE_SH7604 is not set +# CONFIG_CPU_SUBTYPE_SH7619 is not set + +# +# SH-2A Processor Support +# +CONFIG_CPU_SUBTYPE_SH7206=y + +# +# SH-3 Processor Support +# +# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7706 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7710 is not set + +# +# SH-4 Processor Support +# +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7751R is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set + +# +# ST40 Processor Support +# +# CONFIG_CPU_SUBTYPE_ST40STB1 is not set +# CONFIG_CPU_SUBTYPE_ST40GX1 is not set + +# +# SH-4A Processor Support +# +# CONFIG_CPU_SUBTYPE_SH7770 is not set +# CONFIG_CPU_SUBTYPE_SH7780 is not set + +# +# SH4AL-DSP Processor Support +# +# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SH7343 is not set + +# +# Memory management options +# +CONFIG_PAGE_OFFSET=0x00000000 +CONFIG_MEMORY_START=0x0c000000 +CONFIG_MEMORY_SIZE=0x02000000 +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +# CONFIG_SH_WRITETHROUGH is not set +# CONFIG_SH_OCRAM is not set + +# +# Processor features +# +# CONFIG_CPU_LITTLE_ENDIAN is not set +# CONFIG_SH_FPU is not set +# CONFIG_SH_FPU_EMU is not set +# CONFIG_SH_DSP is not set + +# +# Timer support +# +CONFIG_SH_CMT=y +# CONFIG_SH_MTU2 is not set +CONFIG_SH_PCLK_FREQ=33333333 +CONFIG_SH_CLK_MD=6 + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +# CONFIG_SH_DMA is not set + +# +# Companion Chips +# +# CONFIG_HD6446X_SERIES is not set + +# +# Kernel features +# +CONFIG_HZ_100=y +# CONFIG_HZ_250 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=100 +# CONFIG_KEXEC is not set +# CONFIG_SMP is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +# CONFIG_UBC_WAKEUP is not set +# CONFIG_CMDLINE_BOOL is not set + +# +# Bus options +# +# CONFIG_PCI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# + +# +# PCI Hotplug Support +# + +# +# Executable file formats +# +CONFIG_BINFMT_FLAT=y +CONFIG_BINFMT_ZFLAT=y +# CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options (EXPERIMENTAL) +# +# CONFIG_PM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +# CONFIG_PACKET is not set +# CONFIG_UNIX is not set +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 +# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set +# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x20000000 +CONFIG_MTD_PHYSMAP_LEN=0x1000000 +CONFIG_MTD_PHYSMAP_BANKWIDTH=4 +# CONFIG_MTD_SOLUTIONENGINE is not set +# CONFIG_MTD_UCLINUX is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_TIFM_CORE is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Network device support +# +# CONFIG_NETDEVICES is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=4 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_UNIX98_PTYS is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_MINIX_FS is not set +CONFIG_ROMFS_FS=y +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_DNOTIFY is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +# CONFIG_SYSFS is not set +# CONFIG_TMPFS is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_UNWIND_INFO is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_SH_STANDARD_BIOS is not set +# CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y -- 2.34.1