firefly-linux-kernel-4.4.55.git
2010-10-06 Greg Meistew1: slaves: ds2781: Add DS2781 driver
2010-10-06 Dan Murphy[ARM] tegra: stingray: board file: Add USBnet functionality
2010-10-06 Dmitry Shmidt[ARM] tegra: stingray: Set built-in flag for wlan device
2010-10-06 Dmitry Shmidt[ARM] tegra: mmc: Fix built-in device detect delay
2010-10-06 prabhu.annabathula[ARM] stingray defconfig change to enable GPIO controll...
2010-10-06 prabhu.annabathula[ARM] stingray board file: GPS board file changes for...
2010-10-06 prabhu.annabathulaGPS: Add gpio controller driver for brcm 4750
2010-10-06 Dmitry Shmidt[ARM] tegra: stingray: Add Wifi MAC ATAG processing
2010-10-06 Greg Meistemfd: cpcap-whisper: Accessory detection updates
2010-10-06 Andrei Warkentin[ARM] configs: Add tegra w1 master to stingray defconfig
2010-10-06 Rebecca Schultz... [ARM] tegra: Add w1 support to stingray board files
2010-10-06 Praveen Bharathi[ARM] tegra: stingray: Enable akm8975 and disable akm8973
2010-10-06 Praveen Bharathi[ARM] tegra: stingray: Add akm8975 magnetometer data
2010-10-06 Jaikumar GaneshAdd rfkill for BCM 4329 for bluetooth.
2010-10-06 Dan Murphy[ARM] tegra: stingray: Update backlight control registe...
2010-10-06 Dan Murphyleds: lp8550 driver update.
2010-10-06 James Wylder[ARM] tegra: stingray: boardfile - handle power-off...
2010-10-06 Colin Cross[ARM] tegra: stingray: Enable cpuidle and cpufreq
2010-10-06 Mike Lockwood[ARM] tegra: stingray: Enable MTP USB function, disable...
2010-10-06 Mike Lockwood[ARM] tegra: stingray: Board file support for MTP USB...
2010-10-06 Colin Cross[ARM] tegra: stingray: Set i2c bus speed
2010-10-06 Dan Murphy[ARM] Stingray defconfig: Expose the I2C char device
2010-10-06 Erik Gilling[ARM] tegra: add NV* to stingray_defconfig
2010-10-06 Greg Meistemfd: cpcap-whisper: Report audio cable
2010-10-06 Greg Meiste[ARM] tegra: stingray: Initialize SW1, SW6, RF1, RF2...
2010-10-06 Dan Murphy[ARM] Stingray defconfig: Add LP8550 defconfig flag
2010-10-06 Dan Murphy[ARM] Stingray panel board file: Add lp8550 board file...
2010-10-06 Dan Murphyleds: National LP8550 LED driver for the display
2010-10-06 Erik GillingHACK: [ARM] update PRRR and NMRR registers to agree...
2010-10-06 Colin CrossHACK: [ARM] tegra: stingray: Initialize emc clock to...
2010-10-06 Erik GillingHACK: [ARM] tegra: add 3d support to stingray board...
2010-10-06 Erik GillingHACK: [ARM] tegra: add 3d support to olympus board...
2010-10-06 Erik GillingHACK: [ARM] tegra: add nvos, nvrm, and nvmap
2010-10-06 Erik GillingHACK: [ARM] tegra: reduce vmalloc space for nvmap
2010-10-06 Dan Murphy[ARM] Stingray SPI board file: Modify the LED sink...
2010-10-06 Dan Murphy[ARM] Stingray sensor board file: Add values to the...
2010-10-06 Colin Cross[ARM] tegra: stingray: Add hsuarts
2010-10-06 makarand.karvekar[ARM] stingray: Load touch firmware and configuration...
2010-10-06 makarand.karvekartouch: qtouch_obp: Add 12bit resolution for x,y co...
2010-10-06 Greg Meiste[ARM] tegra: stingray: CPCAP and charging changes for...
2010-10-06 James Wylder[ARM] tegra: stingray: Add board revision identification
2010-10-06 Dmitry Shmidt[ARM] tegra: stingray: Provide random MAC address for...
2010-10-06 Dan Murphy[ARM] tegra: stingray: Use generic CPCAP led driver...
2010-10-06 Dan Murphy[ARM] tegra: stingray: Add generic CPCAP led to defconfig
2010-10-06 Dan Murphyleds: Create generic CPCAP led driver
2010-10-06 Colin Crossmisc: max9635: Disable debug messages by default
2010-10-06 Greg Meistemfd: cpcap: Fix VUSB issues
2010-10-06 Greg Meiste[ARM] tegra: stingray: Add SW2 and SW4 regulators
2010-10-06 Greg Meistetegra: stingray: Temporarily set SW5 to boot_on
2010-10-06 Greg Meisteregulator: cpcap: Add support for SW2 and SW4
2010-10-06 Colin Crossmisc: kxtf9: Fix printk
2010-10-06 Dan Murphy[ARM] tegra: stingray: Add gyroscope board file data
2010-10-06 Dan Murphy[ARM] tegra: stingray: Add gyroscope to defconfig
2010-10-06 Dan Murphymisc: Add ST Micro L3G4200D Gyroscope code
2010-10-06 Dan Murphy[ARM] tegra: stingray: Clean up the sensors board file
2010-10-06 James Wylder[ARM] tegra: stingray: register pm_power_off function
2010-10-06 Dan Murphy[ARM] tegra: stingray: Add Home key LED to board files
2010-10-06 Dan Murphy[ARM] tegra: stingray: Enable CPCAP LEDs in defconfig
2010-10-06 Dan Murphyleds: CPCAP LED driver initial submission
2010-10-06 Greg Meistetegra: stingray: Changes for Whisper 0.4
2010-10-06 Greg Meistemfd: cpcap-whisper: Changes for version 0.4
2010-10-06 Rebecca Schultz... [ARM] tegra: stingray: Add SPI board file
2010-10-06 Dan Murphy[ARM] tegra: stingray: Add MAX9635 to defconfig
2010-10-06 Dan Murphy[ARM] tegra: stingray: Add MAX9635 to board file
2010-10-06 Dan Murphymisc: Initial MAX9635 ALS driver
2010-10-06 Rebecca Schultz... [ARM] tegra: Stingray: Add touch board file.
2010-10-06 Makarand Karvekar[ARM] tegra: Olympus: i2c board file updated for touch.
2010-10-06 Makarand Karvekartouch: qtouch obp mxt1386 support
2010-10-06 Dan Murphy[ARM] tegra: stingray: Add KXTF9 defconfig flag
2010-10-06 Dan Murphy[ARM] tegra: stingray: Add KXTF9 data to sensor board...
2010-10-06 Dan Murphymisc: KXTF9 Accelerometer driver
2010-10-06 Dmitry Shmidt[ARM] tegra: stingray: Add bcm4329 module compilation
2010-10-06 Dmitry Shmidt[ARM] terga: stingray: Add wlan nvs export support
2010-10-06 Greg Meiste[ARM] tegra: stingray: Add bq24617 charger support
2010-10-06 Colin Cross[ARM] tegra: stingray_defconfig: Add bq24617 charger
2010-10-06 Greg Meistepower: bq24617: Add bq24617 charger driver
2010-10-06 Rebecca Schultz... [ARM] stingray: Add cpcap to defconfig
2010-10-06 Greg Meistemfd: cpcap: Add CPCAP drivers
2010-10-06 Dan Murphy[ARM] tegra: stingray: Add backlight to the panel board...
2010-10-06 Dan Murphy[ARM] tegra: stingray_defconfig: Enable backlight LED...
2010-10-06 Dan Murphyleds: Simple GPIO driver to control the AUO backlight
2010-10-06 Dan Murphy[ARM] tegra: stingray: Initial sensor board file for...
2010-10-06 Dan Murphy[ARM] tegra: stingray_defconfig: Enable the BMP085...
2010-10-06 Colin Cross[ARM] tegra: stingray: keypad: Update keycodes
2010-10-06 Colin Cross[ARM] tegra: stingray: Add drive strength table
2010-10-06 Colin Cross[ARM] tegra: stingray: Make board init calls explicit
2010-10-06 Colin Cross[ARM] tegra: olympus: Make board init calls explicit
2010-10-06 Dmitry Shmidt[ARM] tegra: stingray: Add stingray_defconfig
2010-10-06 Dmitry Shmidt[ARM] tegra: stingray: Fix wlan support
2010-10-06 Colin Cross[ARM] tegra: stingray: Update board files for stingray
2010-10-06 Colin Cross[ARM] tegra: stingray: Initial stingray board files
2010-10-06 Colin Cross[ARM] tegra: olympus: Make local structures static
2010-10-06 Colin Cross[ARM] tegra: olympus: Use clock init tables
2010-10-06 Dmitry Shmidtdrivers: mmc: tegra: Add fake card detect support
2010-10-06 Dmitry Shmidt[ARM] tegra: olympus: Add Wlan platform support
2010-10-06 Colin Cross[ARM] tegra: olympus: Initialize pll_p_out* on boot
2010-10-06 Erik Gilling[ARM] tegra: move olympus to use generic devices.c...
2010-10-06 Colin Cross[ARM] tegra: olympus: update olympus_defconfig
2010-10-06 Colin Cross[ARM] tegra: olympus: Enable all SD busses
2010-10-06 Colin Cross[ARM] tegra: olympus: Add test hsuart
next